diff options
Diffstat (limited to 'release_23/Makefile.config.in')
-rw-r--r-- | release_23/Makefile.config.in | 276 |
1 files changed, 0 insertions, 276 deletions
diff --git a/release_23/Makefile.config.in b/release_23/Makefile.config.in deleted file mode 100644 index f3a934659289..000000000000 --- a/release_23/Makefile.config.in +++ /dev/null @@ -1,276 +0,0 @@ -#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===# -# -# The LLVM Compiler Infrastructure -# -# This file is distributed under the University of Illinois Open Source -# License. See LICENSE.TXT for details. -# -#===------------------------------------------------------------------------===# -# -# This file is included by Makefile.common. It defines paths and other -# values specific to a particular installation of LLVM. -# -#===------------------------------------------------------------------------===# - -# Define LLVM specific info and directories based on the autoconf variables -LLVMPackageName := @PACKAGE_NAME@ -LLVMVersion := @PACKAGE_VERSION@ -LLVM_CONFIGTIME := @LLVM_CONFIGTIME@ - -########################################################################### -# Directory Configuration -# This section of the Makefile determines what is where. To be -# specific, there are several locations that need to be defined: -# -# o LLVM_SRC_ROOT : The root directory of the LLVM source code. -# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. -# -# o PROJ_SRC_DIR : The directory containing the code to build. -# o PROJ_SRC_ROOT : The root directory of the code to build. -# -# o PROJ_OBJ_DIR : The directory in which compiled code will be placed. -# o PROJ_OBJ_ROOT : The root directory in which compiled code is placed. -# -########################################################################### - -PWD := @BINPWD@ -# Set the project name to LLVM if its not defined -ifndef PROJECT_NAME -PROJECT_NAME := $(LLVMPackageName) -endif - -PROJ_OBJ_DIR := $(shell $(PWD)) -PROJ_OBJ_ROOT := $(shell cd $(PROJ_OBJ_DIR)/$(LEVEL); $(PWD)) - -ifeq ($(PROJECT_NAME),llvm) -LLVM_SRC_ROOT := $(shell cd @abs_top_srcdir@; $(PWD)) -LLVM_OBJ_ROOT := $(shell cd @abs_top_builddir@; $(PWD)) -PROJ_SRC_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(PWD)) -PROJ_SRC_DIR := $(shell cd $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) -prefix := @prefix@ -PROJ_prefix := $(prefix) -PROJ_VERSION := $(LLVMVersion) -else -ifndef PROJ_SRC_ROOT -$(error Projects must define PROJ_SRC_ROOT) -endif -ifndef PROJ_OBJ_ROOT -$(error Projects must define PROJ_OBJ_ROOT) -endif -ifndef PROJ_INSTALL_ROOT -$(error Projects must define PROJ_INSTALL_ROOT) -endif -ifndef LLVM_SRC_ROOT -$(error Projects must define LLVM_SRC_ROOT) -endif -ifndef LLVM_OBJ_ROOT -$(error Projects must define LLVM_OBJ_ROOT) -endif -PROJ_SRC_DIR := $(shell cd $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) -prefix := $(PROJ_INSTALL_ROOT) -PROJ_prefix := $(prefix) -ifndef PROJ_VERSION -PROJ_VERSION := 1.0 -endif -endif - -LLVMMAKE := $(LLVM_SRC_ROOT)/make - -PROJ_bindir := $(DESTDIR)$(PROJ_prefix)/bin -PROJ_libdir := $(DESTDIR)$(PROJ_prefix)/lib -PROJ_datadir := $(DESTDIR)$(PROJ_prefix)/share -PROJ_docsdir := $(DESTDIR)$(PROJ_prefix)/docs/llvm -PROJ_etcdir := $(DESTDIR)$(PROJ_prefix)/etc/llvm -PROJ_includedir := $(DESTDIR)$(PROJ_prefix)/include -PROJ_infodir := $(DESTDIR)$(PROJ_prefix)/info -PROJ_mandir := $(DESTDIR)$(PROJ_prefix)/share/man - -# Determine if we're on a unix type operating system -LLVM_ON_UNIX:=@LLVM_ON_UNIX@ -LLVM_ON_WIN32:=@LLVM_ON_WIN32@ - -# Target operating system for which LLVM will be compiled. -OS=@OS@ - -# Target hardware architecture -ARCH=@ARCH@ - -# Indicates, whether we're cross-compiling LLVM or not -LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@ - -# Executable file extension for build platform (mainly for -# tablegen call if we're cross-compiling). -BUILD_EXEEXT=@BUILD_EXEEXT@ - -# Target triple (cpu-vendor-os) for which we should generate code -TARGET_TRIPLE=@target@ - -# Extra options to compile LLVM with -EXTRA_OPTIONS=@EXTRA_OPTIONS@ - -# Endian-ness of the target -ENDIAN=@ENDIAN@ - -# Path to the C++ compiler to use. This is an optional setting, which defaults -# to whatever your gmake defaults to. -CXX = @CXX@ - -# Path to the CC binary, which use used by testcases for native builds. -CC := @CC@ - -# Linker flags. -LDFLAGS+=@LDFLAGS@ - -# Path to the library archiver program. -AR_PATH = @AR@ - -# Path to the nm program -NM_PATH = @NM@ - -# The pathnames of the programs we require to build -BISON := @BISON@ -CMP := @CMP@ -CP := @CP@ -DATE := @DATE@ -FIND := @FIND@ -FLEX := @LEX@ -GREP := @GREP@ -INSTALL := @INSTALL@ -MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs -MV := @MV@ -RANLIB := @RANLIB@ -RM := @RM@ -SED := @SED@ -TAR := @TAR@ -YACC := @YACC@ - -# Paths to miscellaneous programs we hope are present but might not be -PERL := @PERL@ -BZIP2 := @BZIP2@ -DOT := @DOT@ -DOXYGEN := @DOXYGEN@ -GROFF := @GROFF@ -GZIP := @GZIP@ -OCAMLC := @OCAMLC@ -OCAMLOPT := @OCAMLOPT@ -OCAMLDEP := @OCAMLDEP@ -OCAMLDOC := @OCAMLDOC@ -POD2HTML := @POD2HTML@ -POD2MAN := @POD2MAN@ -RUNTEST := @RUNTEST@ -TCLSH := @TCLSH@ -ZIP := @ZIP@ - -HAVE_PERL := @HAVE_PERL@ -HAVE_PTHREAD := @HAVE_PTHREAD@ - -LIBS := @LIBS@ - -# Targets that we should build -TARGETS_TO_BUILD=@TARGETS_TO_BUILD@ - -# Path to location for LLVM C/C++ front-end. You can modify this if you -# want to override the value set by configure. -LLVMGCCDIR := @LLVMGCCDIR@ - -# Determine the target for which LLVM should generate code. -ifeq (@LLVMGCC_MAJVERS@,3) -LLVMGCCARCH := @target@/3.4-llvm -else -LLVMGCCARCH := @target@/@LLVMGCC_VERSION@ -endif - -# Determine the path where the library executables are -LLVMGCCLIBEXEC := @LLVMGCCLIBEXEC@ - -# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries: -LLVMGCC := @LLVMGCC@ -LLVMGXX := @LLVMGXX@ -LLVMCC1 := @LLVMCC1@ -LLVMCC1PLUS := @LLVMCC1PLUS@ -LLVMGCC_VERSION := @LLVMGCC_VERSION@ -LLVMGCC_MAJVERS := @LLVMGCC_MAJVERS@ -LLVMGCC_LANGS := @LLVMGCC_LANGS@ - -# Path to directory where object files should be stored during a build. -# Set OBJ_ROOT to "." if you do not want to use a separate place for -# object files. -OBJ_ROOT := . - -# These are options that can either be enabled here, or can be enabled on the -# make command line (ie, make ENABLE_PROFILING=1): - -# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put -# into the "Release" directories. Otherwise, LLVM code is not optimized and -# output is put in the "Debug" directories. -#ENABLE_OPTIMIZED = 1 -@ENABLE_OPTIMIZED@ - -# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will -# exclude assertion checks, otherwise they are included. -#DISABLE_ASSERTIONS = 1 -@DISABLE_ASSERTIONS@ - -# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM -# code will include expensive checks, otherwise they are excluded. -#ENABLE_EXPENSIVE_CHECKS = 0 -@ENABLE_EXPENSIVE_CHECKS@ - -# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug -# symbols. -#DEBUG_RUNTIME = 1 -@DEBUG_RUNTIME@ - -# When ENABLE_PROFILING is enabled, the llvm source base is built with profile -# information to allow gprof to be used to get execution frequencies. -#ENABLE_PROFILING = 1 - -# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built -ENABLE_DOXYGEN = @ENABLE_DOXYGEN@ - -# Do we want to enable threads? -ENABLE_THREADS := @ENABLE_THREADS@ - -# Do we want to build with position independent code? -ENABLE_PIC := @ENABLE_PIC@ - -# This option tells the Makefiles to produce verbose output. -# It essentially prints the commands that make is executing -#VERBOSE = 1 - -# Enable JIT for this platform -TARGET_HAS_JIT = @TARGET_HAS_JIT@ - -# Shared library extension for host platform. -SHLIBEXT = @SHLIBEXT@ - -# Executable file extension for host platform. -EXEEXT = @EXEEXT@ - -# Things we just assume are "there" -ECHO := echo - -# Get the options for causing archives to link all their content instead of -# just missing symbols, and the inverse of that. This is used for certain LLVM -# tools that permit loadable modules. It ensures that the LLVM symbols will be -# available to those loadable modules. -LINKALL := @LINKALL@ -NOLINKALL := @NOLINKALL@ - -# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending -# on the check. -HUGE_VAL_SANITY = @HUGE_VAL_SANITY@ - -# Bindings that we should build -BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@ -ALL_BINDINGS := @ALL_BINDINGS@ -OCAML_LIBDIR := @OCAML_LIBDIR@ - -# When compiling under Mingw/Cygwin, executables such as tblgen -# expect Windows paths, whereas the build system uses Unix paths. -# The function SYSPATH transforms Unix paths into Windows paths. -ifneq (,$(findstring -mno-cygwin, $(CXX))) - SYSPATH = $(shell echo $(1) | cygpath -m -f -) -else - SYSPATH = $(1) -endif |