diff options
Diffstat (limited to 'release_23/test/lib/llvm.exp')
-rw-r--r-- | release_23/test/lib/llvm.exp | 264 |
1 files changed, 0 insertions, 264 deletions
diff --git a/release_23/test/lib/llvm.exp b/release_23/test/lib/llvm.exp deleted file mode 100644 index b59f341d72b1..000000000000 --- a/release_23/test/lib/llvm.exp +++ /dev/null @@ -1,264 +0,0 @@ -# This procedure executes one line of a test case's execution script. -proc execOneLine { test PRS outcome lineno line } { - set status 0 - set resultmsg "" - set retval [ catch { eval exec -keepnewline -- $line } errmsg ] - if { $retval != 0 } { - set code [lindex $::errorCode 0] - set lineno [expr $lineno + 1] - if { $PRS != ""} { - set PRS " for $PRS" - } - set errmsg " at line $lineno\nwhile running: $line\n$errmsg" - switch "$code" { - CHILDSTATUS { - set status [lindex $::errorCode 2] - if { $status != 0 } { - set resultmsg "$test$PRS\nFailed with exit($status)$errmsg" - } - } - CHILDKILLED { - set signal [lindex $::errorCode 2] - set resultmsg "$test$PRS\nFailed with signal($signal)$errmsg" - } - CHILDSUSP { - set signal [lindex $::errorCode 2] - set resultmsg "$test$PRS\nFailed with suspend($signal)$errmsg" - } - POSIX { - set posixNum [lindex $::errorCode 1] - set posixMsg [lindex $::errorCode 2] - set resultmsg "$test$PRS\nFailed with posix($posixNum,$posixMsg)$errmsg" - } - NONE { - } - default { - } - } - } - return $resultmsg -} - -# This procedure performs variable substitutions on the RUN: lines of a test -# cases. -proc substitute { line test tmpFile } { - global srcroot objroot srcdir objdir subdir target_triplet prcontext - global llvmgcc llvmgxx llvmgcc_version llvmgccmajvers ocamlc - global gccpath gxxpath compile_c compile_cxx link shlibext llvmlibsdir - set path [file join $srcdir $subdir] - - # Substitute all Tcl variables. - set new_line [subst $line ] - - #replace %prcontext with prcontext.tcl (Must replace before %p) - regsub -all {%prcontext} $new_line $prcontext new_line - #replace %llvmgcc with actual path to llvmgcc - regsub -all {%llvmgcc} $new_line "$llvmgcc -emit-llvm" new_line - #replace %llvmgxx with actual path to llvmg++ - regsub -all {%llvmgxx} $new_line "$llvmgxx -emit-llvm" new_line - #replace %compile_cxx with C++ compilation command - regsub -all {%compile_cxx} $new_line "$compile_cxx" new_line - #replace %compile_c with C compilation command - regsub -all {%compile_c} $new_line "$compile_c" new_line - #replace %link with C++ link command - regsub -all {%link} $new_line "$link" new_line - #replace %shlibext with shared library extension - regsub -all {%shlibext} $new_line "$shlibext" new_line - #replace %ocamlc with ocaml compiler command - regsub -all {%ocamlc} $new_line "$ocamlc" new_line - #replace %llvmlibsdir with configure library directory - regsub -all {%llvmlibsdir} $new_line "$llvmlibsdir" new_line - #replace %p with path to source, - regsub -all {%p} $new_line [file join $srcdir $subdir] new_line - #replace %s with filename - regsub -all {%s} $new_line $test new_line - #replace %t with temp filenames - regsub -all {%t} $new_line $tmpFile new_line - #replace %% with % - regsub -all {%%} $new_line % new_line - return $new_line -} - -# This procedure runs the set of tests for the test_source_files array. -proc RunLLVMTests { test_source_files } { - global srcroot objroot srcdir objdir subdir target_triplet llvmgcc_version - set timeout 60 - - set path [file join $objdir $subdir] - - #Make Output Directory if it does not exist already - if { [file exists path] } { - cd $path - } else { - file mkdir $path - cd $path - } - - file mkdir Output - cd Output - - foreach test $test_source_files { - #Should figure out best way to set the timeout - #set timeout 40 - - set filename [file tail $test] - verbose "ABOUT TO RUN: $filename" 2 - set outcome PASS - set tmpFile "$filename.tmp" - - # Mark that it should not be XFAIL for this target. - set targetPASS 0 - - #set hasRunline bool to check if testcase has a runline - set numLines 0 - - # Open the test file and start reading lines - set testFileId [ open $test r] - set runline "" - set PRNUMS "" - foreach line [split [read $testFileId] \n] { - - # if its the END. line then stop parsing (optimization for big files) - if {[regexp {END.[[:space:]]*$} $line match endofscript]} { - break - - # if the line is continued, concatenate and continue the loop - } elseif {[regexp {RUN: *(.+)(\\)$} $line match oneline suffix]} { - set runline "$runline$oneline " - - # if its a terminating RUN: line then do substitution on the whole line - # and then save the line. - } elseif {[regexp {RUN: *(.+)$} $line match oneline suffix]} { - set runline "$runline$oneline" - set runline [ substitute $runline $test $tmpFile ] - set lines($numLines) $runline - set numLines [expr $numLines + 1] - set runline "" - - # if its an PR line, save the problem report number - } elseif {[regexp {PR([0-9]+)} $line match prnum]} { - if {$PRNUMS == ""} { - set PRNUMS "PR$prnum" - } else { - set PRNUMS "$PRNUMS,$prnum" - } - # if its an XFAIL line, see if we should be XFAILing or not. - } elseif {[regexp {XFAIL:[ *](.+)} $line match targets]} { - set targets - - #split up target if more then 1 specified - foreach target [split $targets ,] { - if { [regexp {\*} $target match] } { - if {$targetPASS != 1} { - set outcome XFAIL - } - } elseif { [regexp $target $target_triplet match] } { - if {$targetPASS != 1} { - set outcome XFAIL - } - } elseif { [regexp {llvmgcc(([0-9]+)|([0-9]+[.][0-9]+))} $target match submatch submatch2] } { - if { [regexp ^($submatch)$|^(($submatch)(\.)) $llvmgcc_version match] } { - if {$targetPASS != 1} { - set outcome XFAIL - } - } - } - } - } elseif {[regexp {XTARGET:[ *](.+)} $line match targets]} { - set targets - - #split up target if more then 1 specified - foreach target [split $targets ,] { - if { [regexp {\*} $target match] } { - set targetPASS 1 - set outcome PASS - } elseif { [regexp $target $target_triplet match] } { - set targetPASS 1 - set outcome PASS - } elseif { [regexp {llvmgcc(([0-9]+)|([0-9]+[.][0-9]+))} $target match submatch submatch2] } { - if { [regexp ^($submatch)$|^(($submatch)(\.)) $llvmgcc_version match] } { - set targetPASS 1 - set outcome PASS - } - } - } - } - } - - # Done reading the script - close $testFileId - - - if { $numLines == 0 } { - fail "$test: \nDoes not have a RUN line\n" - } else { - set failed 0 - for { set i 0 } { $i < $numLines } { set i [ expr $i + 1 ] } { - regsub ^.*RUN:(.*) $lines($i) \1 theLine - set resultmsg [execOneLine $test $PRNUMS $outcome $i $theLine ] - if { $resultmsg != "" } { - if { $outcome == "XFAIL" } { - xfail "$resultmsg" - } else { - fail "$resultmsg" - } - set failed 1 - break - } - } - if { $failed } { - continue - } else { - if { $PRNUMS != "" } { - set PRNUMS " for $PRNUMS" - } - if { $outcome == "XFAIL" } { - xpass "$test$PRNUMS" - } else { - pass "$test$PRNUMS" - } - } - } - } -} - -# This procedure provides an interface to check the LLVMGCC_LANGS makefile -# variable to see if llvm-gcc supports compilation of a particular language. -proc llvm_gcc_supports { lang } { - global llvmgcc llvmgcc_langs - # validate the language choices and determine the name of the compiler - # component responsible for determining if the compiler has been built. - switch "$lang" { - ada { set file gnat1 } - c { set file cc1 } - c++ { set file cc1plus } - objc { set file cc1 } - objc++ { set file cc1 } - fortran { set file fcc1 } - default { return 0 } - } - foreach supported_lang [split "$llvmgcc_langs" ,] { - if { "$lang" == "$supported_lang" } { - # FIXME: Knowing it is configured is not enough. We should do two more - # checks here. First, we need to run llvm-gcc -print-prog-name=$file to - # get the path to the compiler. If we don't get a path, the language isn't - # properly configured or built. If we do get a path, we should check to - # make sure that it is executable and perhaps even try executing it. - return 1; - } - } - return 0; -} - -# This procedure provides an interface to check the TARGETS_TO_BUILD makefile -# variable to see if a particular target has been configured to build. This -# helps avoid running tests for targets that aren't available. -proc llvm_supports_target { tgtName } { - global TARGETS_TO_BUILD - foreach target [split $TARGETS_TO_BUILD] { - if { [regexp $tgtName $target match] } { - return 1 - } - } - return 0 -} |