1 files changed, 63 insertions, 0 deletions
diff --git a/configs/Gigabyte/GA-945GCM-S2L.conf b/configs/Gigabyte/GA-945GCM-S2L.conf
new file mode 100644
index 00000000..0bf344b0
--- /dev/null
+++ b/configs/Gigabyte/GA-945GCM-S2L.conf
@@ -0,0 +1,63 @@
+# Configuration file contributed by Ian Pangilinan.
+
+
+### Sensors configuration for Gigabyte GA-945GCM-S2L motherboard
+### 2014-02-21, ianp <snailbox88-dev -at- yahoo -dot- com>
+### Thanks to Jean Delvare
+### Comments are welcome.
+
+
+chip "it8718-*"
+
+### Voltages
+
+   label  in0  "Vcore"
+   label  in1  "Vram"    # "DDR18V" in BIOS
+   label  in2  "+3.3V"
+   ignore in3            # no +5V monitor, not used
+   label  in4  "+12V"
+   ignore in5            # these inputs
+   ignore in6            # are not used
+   ignore in7            # by the board
+
+   ### Scale +12V.
+
+   compute  in4  @*3.9633,  @/3.9633
+
+   ### Set in0 according to CPU VID voltage range.
+   ### Set min and max values according to preference.
+
+   set in0_min  0.850
+   set in0_max  1.362
+   set in1_min  1.8 * 0.95
+   set in1_max  1.8 * 1.05
+   set in2_min  3.3 * 0.95
+   set in2_max  3.3 * 1.05
+   set in4_min   12 * 0.95
+   set in4_max   12 * 1.05
+
+### Temperatures
+
+   ### Ignore temp1 and temp2 as those aren't used.
+
+   ignore temp1
+   ignore temp2
+   label  temp3  "CPU Temp"
+
+   ### Set according to CPU.
+
+   set temp3_min 10
+   set temp3_max 60
+
+### Fans
+
+   ### Ignore fan3 as it isn't used.
+
+   label  fan1  "CPU Fan"
+   label  fan2  "CHA Fan"
+   ignore fan3
+
+   ### Set according to preference.
+
+   set fan1_min 900
+   set fan2_min 0