diff options
Diffstat (limited to 'configs/Gigabyte')
-rw-r--r-- | configs/Gigabyte/X470-AORUS-ULTRA-GAMING.conf | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/configs/Gigabyte/X470-AORUS-ULTRA-GAMING.conf b/configs/Gigabyte/X470-AORUS-ULTRA-GAMING.conf new file mode 100644 index 00000000..cff6d8ff --- /dev/null +++ b/configs/Gigabyte/X470-AORUS-ULTRA-GAMING.conf @@ -0,0 +1,90 @@ +# Experimental config for Gigabyte X470 AORUS ULTRA GAMING +# https://www.gigabyte.com/Motherboard/X470-AORUS-ULTRA-GAMING-rev-10 +# +# This config is based on: +# - GA-AB350-GAMING3.conf +# - GA-AX370-GAMING5.conf +# - output of HWiNFO64 Sensor Status program on Windows + +# The temp3 temperature offset depends on the CPU type and needs to be +# adjusted. Compare against the output of k10temp for the correct value. +# I've tested with my AMD Ryzen 5 2600 and a difference between temp3 and Tdie (from k10temp) +# is usually very small so I personally don't use any adjustment of that field. + +chip "it8686-isa-0a40" + label temp1 "System 1" + label temp2 "Chipset" + label temp3 "CPU Socket" + label temp4 "PCIEX16" + label temp5 "VRM MOS" + label temp6 "VSOC MOS" + label in0 "CPU Vcore" + label in1 "+3.3V" + label in2 "+12V" + label in3 "+5V" + label in4 "CPU Vcore SOC" + label in5 "CPU Vddp" + label in6 "DRAM A/B" +# label in7 "3VSB" +# label in8 "Battery" + label fan1 "CPU_FAN" + label fan2 "SYS_FAN1" + label fan3 "SYS_FAN2" + label fan4 "SYS_FAN3" + label fan5 "CPU_OPT" + +# compute temp3 @+0.5,@+0.5 + compute in1 @*1.65,@*1.65 + compute in2 @*6,@*6 + compute in3 @*2.5,@*2.5 + + set in0_min 0.35 + set in0_max 1.45 + set in1_min 3.3 * 0.97 + set in1_max 3.3 * 1.03 + set in2_min 12 * 0.97 + set in2_max 12 * 1.03 + set in3_min 5 * 0.97 + set in3_max 5 * 1.03 + set in4_min 0.9 + set in4_max 1.26 + set in5_min 0.9 * 0.95 + set in5_max 0.9 * 1.05 + set in6_min 1.1 + set in6_max 1.6 + +chip "it8792-isa-0a60" + label temp1 "PCIEX8" + label temp2 "Temp 2" + label temp3 "System 2" + label in0 "CPU Vcore" + label in1 "DDR VTT" + label in2 "Chipset Core" +# label in3 "VIN3" + label in4 "CPU Vdd18" + label in5 "DDR Vpp A/B" +# label in6 "3VSB" +# label in7 "Battery" + label fan1 "SYS_FAN5_PUMP" + label fan2 "SYS_FAN6_PUMP" + label fan3 "SYS_FAN4" + + compute in5 @ * (208/125), @ / (208/125) + + set in0_min 0.35 + set in0_max 1.45 + set in1_min 1.1 / 2 + set in1_max 1.6 / 2 + set in2_min 1.05 * 0.95 + set in2_max 1.05 * 1.05 + set in4_min 1.8 * 0.97 + set in4_max 1.8 * 1.03 + set in5_min 2.5 * 0.95 + set in5_max 2.5 * 1.05 + set in7_min 3.3 * 0.97 + set in7_max 3.3 * 1.03 + +# ignore fan1 +# ignore fan2 +# ignore fan3 +# ignore in8 |