diff options
Diffstat (limited to 'configs')
-rw-r--r-- | configs/ASRock/B450-Gaming-ITX-ac.conf | 100 | ||||
-rw-r--r-- | configs/Gigabyte/GA-AB350N-GAMING-WIFI-REV1.0.conf | 86 | ||||
-rw-r--r-- | configs/Gigabyte/GA-H170M-D3H.conf | 30 |
3 files changed, 216 insertions, 0 deletions
diff --git a/configs/ASRock/B450-Gaming-ITX-ac.conf b/configs/ASRock/B450-Gaming-ITX-ac.conf new file mode 100644 index 00000000..01e7603c --- /dev/null +++ b/configs/ASRock/B450-Gaming-ITX-ac.conf @@ -0,0 +1,100 @@ +# ASRock B450 Gaming-ITX/ac +# manufacturing date July 2019 (came with Zen2-aware BIOS) +# board does have connectors for buzzer and 3 fans (2 case + 1 CPU) +# board does not have a connector for intrusion detection +# dmesg: "nct6775: Found NCT6792D or compatible chip at 0x2e:0x290" + +chip "nct6792-*" + + # beeping appears to not work + set beep_enable 1 + + # voltages + + label in0 "Vcore" + compute in0 @*2, @/2 + set in0_min 0.16 + set in0_max 1.46 + set in0_beep 1 + + label in2 "AVCC" + set in2_min 3.30 * 0.90 + set in2_max 3.30 * 1.10 + + label in3 "+3.3V" + set in3_min 3.30 * 0.90 + set in3_max 3.30 * 1.10 + + label in7 "3VSB" + set in7_min 3.30 * 0.90 + set in7_max 3.30 * 1.10 + + label in8 "VBAT" + set in8_min 3.00 * 0.90 + set in8_max 3.30 * 1.10 + + label in9 "+12V" + compute in9 @*(53/8), @/(53/8) + set in9_min 12 * 0.90 + set in9_max 12 * 1.10 + + label in13 "+5V" + compute in13 @*(24/8), @/(24/8) + set in13_min 5 * 0.90 + set in13_max 5 * 1.10 + + # these are all zero + ignore in1 + ignore in4 + ignore in5 + ignore in6 + ignore in14 + + # these have non-zero input, but are unknown + ignore in10 + ignore in11 + ignore in12 + + # temperatures + # not sure about temp2 and temp3 + label temp2 "VRM(?) temp" + set temp2_max 55 + set temp2_max_hyst 50 + set temp2_beep 1 + label temp3 "MB(?) temp" + set temp3_max 55 + set temp3_max_hyst 50 + set temp3_beep 1 + label temp7 "CPU temp" + + # temp2 has similar readings to temp3 + # other temps are zero or unreasonably high/low + ignore temp1 + ignore temp4 + ignore temp5 + ignore temp6 + ignore temp8 + ignore temp9 + ignore temp10 + + # fans + + label fan1 "CHA_FAN1" + set fan1_min 300 + set fan1_beep 1 + label fan2 "CPU_FAN1" + set fan2_min 600 + set fan2_beep 1 + label fan3 "CHA_FAN2" + set fan3_min 300 + set fan3_beep 1 + + # these are not on the mainboard + ignore fan4 + ignore fan5 + + # misc + + ignore intrusion0 + ignore intrusion1 + diff --git a/configs/Gigabyte/GA-AB350N-GAMING-WIFI-REV1.0.conf b/configs/Gigabyte/GA-AB350N-GAMING-WIFI-REV1.0.conf new file mode 100644 index 00000000..22f8f18e --- /dev/null +++ b/configs/Gigabyte/GA-AB350N-GAMING-WIFI-REV1.0.conf @@ -0,0 +1,86 @@ +# GA-AB350N-Gaming WIFI (rev. 1.0) + +chip "it8686-isa-0a40" + label temp1 "System 1" + label temp2 "Chipset" + label temp3 "CPU Socket" + label temp4 "PCI-EX16" + label temp5 "VRM MOS" + label temp6 "vSOC MOS" + + label in0 "CPU Vcore" + label in1 "+3.3v" + label in2 "+12v" + label in3 "+5v" + label in4 "CPU Vcore SOC" + label in5 "CPU VDDP" + label in6 "DRAM A/B" + label in7 "3VSB" + label in8 "Battery" + + label fan1 "CPU_FAN" + label fan2 "SYS_FAN1" + + compute in1 @*1.650,@/1.650 + compute in2 @*6,@/6 + compute in3 @*2.5,@/2.5 + + set temp1_min 15 + set temp1_max 65 + set temp2_min 15 + set temp2_max 80 + set temp3_min 15 + set temp3_max 85 + set temp4_min 15 + set temp4_max 30 + set temp5_min 15 + set temp5_max 95 + set temp6_min 15 + set temp6_max 90 + + set in0_min 0.6 + set in0_max 1.45 + set in1_min 3.135 + set in1_max 3.465 + set in2_min 11.400 + set in2_max 12.600 + set in3_min 4.750 + set in3_max 5.250 + set in6_min 1.2 * 0.97 + set in6_max 1.2 * 1.2 + set in7_min 3.3 * 0.97 + set in7_max 3.3 * 1.05 + + set fan1_min 900 + set fan2_min 900 + +chip "it8792-isa-0a60" + label temp1 "PCI-EX8" + label temp2 "Temp 2" + label temp3 "System 2" + + label in0 "CPU Vcore" + label in1 "DDR VTT" + label in2 "Chipset Core" + label in3 "VIN3" + label in4 "CPU VDD18" + label in5 "DDR VPP" + label in7 "3VSB" + label in8 "VBAT" + + set temp1_min 15 + set temp1_max 60 + set temp2_min 15 + set temp2_max 60 + set temp3_min 15 + set temp3_max 60 + + set in0_min 0.6 + set in0_max 1.45 + set in7_min 3.135 + set in7_max 3.465 + + ignore in6 + ignore fan1 + ignore fan2 + ignore fan3 diff --git a/configs/Gigabyte/GA-H170M-D3H.conf b/configs/Gigabyte/GA-H170M-D3H.conf new file mode 100644 index 00000000..0094424c --- /dev/null +++ b/configs/Gigabyte/GA-H170M-D3H.conf @@ -0,0 +1,30 @@ +# Configuration for the Gigabyte GA-H170M-D3H (name from the manual) mainboard. +# Name from dmidecode -s baseboard-product-name: H170M-D3H-CF +# BIOS version: F23f +# Driver: it87 +# added by dokutan, 2020 + +chip "it8628-isa-*" + + ### voltage sensors + ### these labels are mostly determined by comparing the values to the values from the bios + # in1 - 1n5: i have no clue, the bios reports +5V and +12V values, + # the it87 kernel documentation suggests in3 might be internal to the chip + # label in0 "Vcore" # this value scales with CPU load but seems a bit low (~0.7V to 1.2V) + # label in2 "+12V" # in2*6 is exactly the +12V value from the bios + label in6 "Vmemory" # this is stable and the value from the bios + + ### fans + ### the mappings fan to label are all tested + label fan1 "CPU fan" + label fan2 "Case fan 1" + label fan3 "Case fan 2" + ignore fan4 # there are only 3 fan headers + CPU fan on this mainboard + label fan5 "Case fan 3" + + ### temperature sensors + ### these labels are determined by comparison with other sensors under different load scenarios + # temp5 correlates with CPU temp, but stays significantly lower + # temp1, temp4 and temp6 stay relatively low, even under CPU load + ignore temp2 # this always gives a reading of +127.0°C + label temp3 "CPU temp" # this might have a 1-2°C difference to the coretemp package sensor |