# ASRock Z3900 Extreme4
# 2019, contributed by Alex Cherkayev <doctor64@gmail.com>
#
# dmi: board_name:   Z390 Extreme4
# dmi: board_vendor: ASRock
# dmi: bios_version: P4.00
# cpu: Intel(R) Core(TM) i7-9700K CPU
chip "nct6791-isa-*"

    # Fans
    label fan1 "CHA Fan 3/WP"
    label fan2 "CPU Fan 1"
    label fan3 "CPU Fan 2/WP"
    label fan4 "CHA Fan 1/WP"
    label fan5 "CHA Fan 2/WP"

    # Temperatures
    label temp1 "Motherboard"
    set temp1_max 55
    set temp1_max_hyst 50
    label temp2 "CPU MB"
    set temp2_max 100
    set temp2_max_hyst 75

    # temp3 always 22
    # temp4 102 in idle, 103 under load
    # temp5 always 15
    # temp6 always 12 
    ignore temp3
    ignore temp4
    ignore temp5
    ignore temp6
    
    #PECI Agent 0 match CPU cores temp    
    label temp7 "CPU Core"
    
    # PCH_CHIP_CPU_MAX_TEMP PCH_CHIP_TEMP PCH_CPU_TEMP always 0.0C, ignore
    ignore temp8
    ignore temp9
    ignore temp10

    # Voltages
    
    label in0 "VCore Voltage"
    compute in0 @*2, @/2
    set in0_min 0.40 
    set in0_max 1.40

    label in1 "+5V"
    # deduced, not confirmed
    compute in1 ((20/10)+1)*@, @/((20/10)+1)
    set in1_min 5 * 0.95
    set in1_max 5 * 1.05

    label in4 "+12V" 
    # deduced, not confirmed
    compute in4 @*12, @/12
    set in4_min 12 * 0.95
    set in4_max 12 * 1.05

    #unknown, always 1.18V just set limits to remove alarm
    set in5_min 1.1
    set in5_max 1.3

    label in6 "PCH +1.0V"
    # limit taken from intel 300 series pch datasheet
    # set in6_min 0.99
    # set in6_max 1.10 
    # verified by changing in bios, limit taken from bios
    set in6_min 0.9
    set in6_max 1.3

    label in9 "VCCST"
    # verified by changing in bios, limit taken from bios
    set in9_min 0.9
    set in9_max 1.25

    # unknown, always 0.24V, just set limit to remove alarm
    set in10_min 0.1
    set in10_max 0.3

    label in11 "VCCIO"
    # verified by changing in bios, limit taken from bios
    # limit taken from bios
    set in11_min 0.85
    set in11_max 1.35

    label in12 "DRAM Voltage"
    # verified by changing in bios, limit taken from bios
    set in12_min 1.10 
    set in12_max 1.40

    label in13 "DRAM VPP"
    # verified by changing in bios, limit taken from bios +- 0.1V
    compute in13 @*2, @/2
    set in13_min 2.4
    set in13_max 2.8
    
    label in14 "VCCSA"
    # verified by changing in bios, limit taken from bios
    set in14_min 0.95
    set in14_max 1.35

    # Potential things to filter
    # These inputs are unused unless you have a case intrusion switch connected.
    # ignore intrusion0
    # ignore intrusion1