# Configuration file contributed by Eric Le Bras.


# Configuration file for Intel D201GLY2 motherboard
# Hardware monitor subsystem controlled by Winbond W83627DHG-B I/O controller.
# Created using information from BIOS and board documentation.

chip "w83627dhg-*"

    label in1 "+12V"
    label in4 "+5V"
    label in6 "+1.5V"

# in5 is obviously unconnected, so ignore it
    ignore in5

    compute in1 @*(55/8), @/(55/8)
    compute in4 @*(1+18/10), @/(1+18/10)

    set in1_min 12.0 * 0.95
    set in1_max 12.0 * 1.05
    set in4_min  5.0 * 0.95
    set in4_max  5.0 * 1.05
    set in6_min  1.5 * 0.90
    set in6_max  1.5 * 1.10

    label fan1 "Chassis fan"
    label fan2 "CPU fan"

# By default the D201GLY2 has a passive heatsink. If the optional active
# heatsink is present, then one of the following lines is to be commented out
# (very likely fan2, though not tried).
    ignore fan2
    ignore fan3
    ignore fan4

    label temp1 "Sys temp"
    label temp2 "CPU temp"
    ignore temp3

    set temp1_max      50
    set temp1_max_hyst 48

    ignore cpu0_vid
    ignore intrusion0