# Example configuration for the SuperMicro H8DC8.
# Contributed by Romain Dolbeau.


# settings for the supermicro H8DC8
# here are the details supplied by the technical support:
##Bus Type = SMBus
##One WindBond W83627HF, One Analog Devices ADM1026
##
##Analog Devices ADM1026, Slave Address=0x2c (0x58 in 8-Bit format)
##==============================================================
##Fan1 Fan Speed, Offset 0x38           RPM=1350000/8/Reading
##Fan2 Fan Speed, Offset 0x39           RPM=1350000/8/Reading
##Fan3 Fan Speed, Offset 0x3a           RPM=1350000/8/Reading
##Fan4 Fan Speed, Offset 0x3b           RPM=1350000/8/Reading
##Fan5 Fan Speed, Offset 0x3c           RPM=1350000/8/Reading
##Fan6 Fan Speed, Offset 0x3d           RPM=1350000/8/Reading
##Fan7 Fan Speed, Offset 0x3e           RPM=1350000/8/Reading
##Fan8 Fan Speed, Offset 0x3f           RPM=1350000/8/Reading
##CPU1 Core Voltage, Offset 0x2d        Voltage=(Reading * 3)/256
##CPU2 Core Voltage, Offset 0x37        Voltage=(Reading * 2.5)/256
##+5VSB Voltage, offset 0x30            Voltage=(Reading * 6)/256
##+1.5V Voltage, offset 0x32            Voltage=(Reading * 3)/256
##+5V Voltage, offset 0x2c              Voltage=(Reading * 6.66)/256
##+12V Voltage, offset 0x2e             Voltage=(Reading * 16)/256
##-12V Voltage, offset 0x2f             Voltage=((Reading* 18.5)/256)-16
##DIMM Voltage, offset 0x33             Voltage=(Reading * 3)/256
##Battery Voltage, Offset 0x26
##Voltage=(((Reading-128)*2)/128)+2)
##System Temperature, Offset 0x1f       C=Reading
##CPU1 Temperature, Offset 0x28         C=Reading
##CPU2 Temperature, Offset 0x29         C=Reading
##Chassis Intrusion, Offset 0x23, BitMask=40
##
##
##Power Supply Failure (From W82627HF), GP12
#
# Notes:
# 1) no section for the W82627HF yet.
# 2) the temperature min/max are ballpark estimate,
#    you may need to fix them depening on your environment
#    such as the setting of your air conditionner.
# 3) According to the support, in11 and in12 (both +3.3V
#    lines) aren't hooked up, yet they supply proper readings
#    (as specified by the manufacturer of the chip for those
#    lines).
#    You may want to disable them.
#
# Originally written by Romain Dolbeau <romain@dolbeau.org>
# Uses at your own risk !

chip "adm1026-i2c-*-2c"

  label fan0 "FAN0 Speed"
  label fan1 "FAN1 Speed"
  label fan2 "FAN2 Speed"
  label fan3 "FAN3 Speed"
  label fan4 "FAN4 Speed"
  label fan5 "FAN5 Speed"
  label fan6 "FAN6 Speed"
  label fan7 "FAN7 Speed"

  set fan0_div 8
  set fan1_div 8
  set fan2_div 8
  set fan3_div 8
  set fan4_div 8
  set fan5_div 8
  set fan6_div 8
  set fan7_div 8

  label in0 "+5VSB Voltage"
  compute in0 @*2,@/2
  set in0_min 5*0.90
  set in0_max 5*1.1

  ignore in1

  label in2 "+1.5V Voltage"
  set in2_min 1.5*0.95
  set in2_max 1.5*1.05

  label in3 "DIMM Voltage"
  set in3_min 2.5*0.95
  set in3_max 2.5*1.05

  ignore in4
  ignore in5
  ignore in6

  label in7 "CPU2 Core Voltage"
  set in7_min 1.35*0.95
  set in7_max 1.35*1.05

  ignore in8
  ignore in9

  label in10 "Battery Voltage"
  set in10_min 3*0.95
  set in10_max 3*1.05

  # for in11 & in12, see comments above
  #ignore in11
  #ignore in12

  label in11 "3.3V Standby"
  set in11_min 3.3*0.95
  set in11_max 3.3*1.05

  label in12 "3.3V Main"
  set in12_min 3.3*0.95
  set in12_max 3.3*1.05

  label in13 "+5V Voltage"
  set in13_min 5*0.95
  set in13_max 5*1.05

  label in14 "CPU1 Core Voltage"
  set in14_min 1.35*0.95
  set in14_max 1.35*1.05

  label in15 "+12V Voltage"
  set in15_min 12*0.95
  set in15_max 12*1.05

  label in16 "-12V Voltage"
  set in16_max -12*0.95
  set in16_min -12*1.05

  label temp1 "System Temperature"
  set temp1_min 18
  set temp1_max 40
  label temp2 "CPU1 Temperature"
  set temp2_min 20
  set temp2_max 45
  label temp3 "CPU2 Temperature"
  set temp3_min 20
  set temp3_max 45