Move it87 voltage limits setting after compute lines.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2668 7894878c-1315-0410-8ee3-d5d059ff63e0

1 files changed, 18 insertions, 18 deletions

diff --git a/etc/sensors.conf.eg b/etc/sensors.conf.eg
index 3d2b082a..8657757a 100644
--- a/etc/sensors.conf.eg
+++ b/etc/sensors.conf.eg
@@ -1399,24 +1399,6 @@ chip "it87-*"
     label in7 "Stdby"
     label in8 "VBat"
 
-    set in0_min 1.5 * 0.95
-    set in0_max 1.5 * 1.05
-    set in1_min 2.4
-    set in1_max 2.6
-    set in2_min 3.3 * 0.95
-    set in2_max 3.3 * 1.05
-    set in3_min 5.0 * 0.95
-    set in3_max 5.0 * 1.05
-    set in4_min 12 * 0.95
-    set in4_max 12 * 1.05
-    set in5_max -12 * 0.95
-    set in5_min -12 * 1.05
-    set in6_max -5 * 0.95
-    set in6_min -5 * 1.05
-    set in7_min 5 * 0.95
-    set in7_max 5 * 1.05
-    #the chip does not support in8 min/max
-
     # vid is not monitored by IT8705F
     # and is not supported by driver at this time
     ignore  vid
@@ -1461,6 +1443,24 @@ chip "it87-*"
 #
     compute in7 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
 
+    set in0_min 1.5 * 0.95
+    set in0_max 1.5 * 1.05
+    set in1_min 2.4
+    set in1_max 2.6
+    set in2_min 3.3 * 0.95
+    set in2_max 3.3 * 1.05
+    set in3_min 5.0 * 0.95
+    set in3_max 5.0 * 1.05
+    set in4_min 12 * 0.95
+    set in4_max 12 * 1.05
+    set in5_max -12 * 0.95
+    set in5_min -12 * 1.05
+    set in6_max -5 * 0.95
+    set in6_min -5 * 1.05
+    set in7_min 5 * 0.95
+    set in7_max 5 * 1.05
+    #the chip does not support in8 min/max
+
 # Temperature
 #
 # Important - if your temperature readings are completely whacky