diff options
Diffstat (limited to 'conf')
| -rw-r--r-- | conf/example.conf.in | 51 |
1 files changed, 34 insertions, 17 deletions
diff --git a/conf/example.conf.in b/conf/example.conf.in index a3d8ca380..6b0622ab9 100644 --- a/conf/example.conf.in +++ b/conf/example.conf.in @@ -429,7 +429,8 @@ allocation { # Configuration option allocation/cache_pool_metadata_require_separate_pvs. # Cache pool metadata and data will always use different PVs. - cache_pool_metadata_require_separate_pvs = 0 + # This configuration option has an automatic default value. + # cache_pool_metadata_require_separate_pvs = 0 # Configuration option allocation/cache_metadata_format. # Sets default metadata format for new cache. @@ -489,7 +490,8 @@ allocation { # Configuration option allocation/thin_pool_metadata_require_separate_pvs. # Thin pool metadata and data will always use different PVs. - thin_pool_metadata_require_separate_pvs = 0 + # This configuration option has an automatic default value. + # thin_pool_metadata_require_separate_pvs = 0 # Configuration option allocation/thin_pool_zero. # Thin pool data chunks are zeroed before they are first used. @@ -528,7 +530,8 @@ allocation { # Configuration option allocation/zero_metadata. # Zero whole metadata area before use with thin or cache pool. - zero_metadata = 1 + # This configuration option has an automatic default value. + # zero_metadata = 1 # Configuration option allocation/thin_pool_chunk_size. # The minimal chunk size in KiB for thin pool volumes. @@ -990,7 +993,8 @@ global { # logs and conversion to disk/core works. # # Not supported for regular operation! - support_mirrored_mirror_log = 0 + # This configuration option has an automatic default value. + # support_mirrored_mirror_log = 0 # Configuration option global/raid10_segtype_default. # The segment type used by the -i -m combination. @@ -1048,7 +1052,8 @@ global { # activated from these events (the default is all.) # When event_activation is disabled, the system will generally run # a direct activation command to activate LVs in complete VGs. - event_activation = 1 + # This configuration option has an automatic default value. + # event_activation = 1 # Configuration option global/use_aio. # Use async I/O when reading and writing devices. @@ -1292,7 +1297,8 @@ activation { # This enables additional checks (and if necessary, repairs) on entries # in the device directory after udev has completed processing its # events. Useful for diagnosing problems with LVM/udev interactions. - verify_udev_operations = 0 + # This configuration option has an automatic default value. + # verify_udev_operations = 0 # Configuration option activation/retry_deactivation. # Retry failed LV deactivation. @@ -1317,23 +1323,27 @@ activation { # When disabled, the striped target is used. The linear target is an # optimised version of the striped target that only handles a single # stripe. - use_linear_target = 1 + # This configuration option has an automatic default value. + # use_linear_target = 1 # Configuration option activation/reserved_stack. # Stack size in KiB to reserve for use while devices are suspended. # Insufficent reserve risks I/O deadlock during device suspension. - reserved_stack = 64 + # This configuration option has an automatic default value. + # reserved_stack = 64 # Configuration option activation/reserved_memory. # Memory size in KiB to reserve for use while devices are suspended. # Insufficent reserve risks I/O deadlock during device suspension. - reserved_memory = 8192 + # This configuration option has an automatic default value. + # reserved_memory = 8192 # Configuration option activation/process_priority. # Nice value used while devices are suspended. # Use a high priority so that LVs are suspended # for the shortest possible time. - process_priority = -18 + # This configuration option has an automatic default value. + # process_priority = -18 # Configuration option activation/volume_list. # Only LVs selected by this list are activated. @@ -1450,7 +1460,8 @@ activation { # auto # Use default value chosen by kernel. # - readahead = "auto" + # This configuration option has an automatic default value. + # readahead = "auto" # Configuration option activation/raid_fault_policy. # Defines how a device failure in a RAID LV is handled. @@ -1586,7 +1597,8 @@ activation { # 8.4G, it is extended to 14.4G: # vdo_pool_autoextend_threshold = 70 # - vdo_pool_autoextend_threshold = 100 + # This configuration option has an automatic default value. + # vdo_pool_autoextend_threshold = 100 # Configuration option activation/vdo_pool_autoextend_percent. # Auto-extending a VDO pool adds this percent extra space. @@ -1622,7 +1634,8 @@ activation { # Use the old behavior of mlockall to pin all memory. # Prior to version 2.02.62, LVM used mlockall() to pin the whole # process's memory while activating devices. - use_mlockall = 0 + # This configuration option has an automatic default value. + # use_mlockall = 0 # Configuration option activation/monitoring. # Monitor LVs that are activated. @@ -1637,7 +1650,8 @@ activation { # intervals of this number of seconds. If this is set to 0 and there # is only one thing to wait for, there are no progress reports, but # the process is awoken immediately once the operation is complete. - polling_interval = 15 + # This configuration option has an automatic default value. + # polling_interval = 15 # Configuration option activation/auto_set_activation_skip. # Set the activation skip flag on new thin snapshot LVs. @@ -2193,7 +2207,8 @@ dmeventd { # failures. It removes failed devices from a volume group and # reconfigures a mirror as necessary. If no mirror library is # provided, mirrors are not monitored through dmeventd. - mirror_library = "libdevmapper-event-lvm2mirror.so" + # This configuration option has an automatic default value. + # mirror_library = "libdevmapper-event-lvm2mirror.so" # Configuration option dmeventd/raid_library. # This configuration option has an automatic default value. @@ -2204,14 +2219,16 @@ dmeventd { # libdevmapper-event-lvm2snapshot.so monitors the filling of snapshots # and emits a warning through syslog when the usage exceeds 80%. The # warning is repeated when 85%, 90% and 95% of the snapshot is filled. - snapshot_library = "libdevmapper-event-lvm2snapshot.so" + # This configuration option has an automatic default value. + # snapshot_library = "libdevmapper-event-lvm2snapshot.so" # Configuration option dmeventd/thin_library. # The library dmeventd uses when monitoring a thin device. # libdevmapper-event-lvm2thin.so monitors the filling of a pool # and emits a warning through syslog when the usage exceeds 80%. The # warning is repeated when 85%, 90% and 95% of the pool is filled. - thin_library = "libdevmapper-event-lvm2thin.so" + # This configuration option has an automatic default value. + # thin_library = "libdevmapper-event-lvm2thin.so" # Configuration option dmeventd/thin_command. # The plugin runs command with each 5% increment when thin-pool data volume |