diff options
Diffstat (limited to 'man/lvreduce.8_pregen')
-rw-r--r-- | man/lvreduce.8_pregen | 102 |
1 files changed, 51 insertions, 51 deletions
diff --git a/man/lvreduce.8_pregen b/man/lvreduce.8_pregen index cdc02cfd6..1781600fe 100644 --- a/man/lvreduce.8_pregen +++ b/man/lvreduce.8_pregen @@ -1,6 +1,6 @@ .TH LVREDUCE 8 "LVM TOOLS #VERSION#" "Red Hat, Inc." .SH NAME -lvreduce \- Reduce the size of a logical volume +lvreduce - Reduce the size of a logical volume . .SH SYNOPSIS \fBlvreduce\fP \fIoption_args\fP \fIposition_args\fP @@ -9,7 +9,7 @@ lvreduce \- Reduce the size of a logical volume .br .SH DESCRIPTION lvreduce reduces the size of an LV. The freed logical extents are returned -to the VG to be used by other LVs. A copy\-on\-write snapshot LV can also +to the VG to be used by other LVs. A copy-on-write snapshot LV can also be reduced if less space is needed to hold COW blocks. Use \fBlvconvert\fP(8) to change the number of data images in a RAID or mirrored LV. @@ -23,39 +23,39 @@ Sizes will be rounded if necessary. For example, the LV size must be an exact number of extents, and the size of a striped segment must be a multiple of the number of stripes. -In the usage section below, \fB\-\-size\fP \fISize\fP can be replaced -with \fB\-\-extents\fP \fINumber\fP. See both descriptions +In the usage section below, \fB--size\fP \fISize\fP can be replaced +with \fB--extents\fP \fINumber\fP. See both descriptions the options section. .SH USAGE -\fBlvreduce\fP \fB-L\fP|\fB\-\-size\fP [\fB-\fP]\fISize\fP[m|UNIT] \fILV\fP +\fBlvreduce\fP \fB-L\fP|\fB--size\fP [\fB-\fP]\fISize\fP[m|UNIT] \fILV\fP .br .RS 4 .ad l -[ \fB-l\fP|\fB\-\-extents\fP [\fB-\fP]\fINumber\fP[PERCENT] ] +[ \fB-l\fP|\fB--extents\fP [\fB-\fP]\fINumber\fP[PERCENT] ] .ad b .br .ad l -[ \fB-A\fP|\fB\-\-autobackup\fP \fBy\fP|\fBn\fP ] +[ \fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP ] .ad b .br .ad l -[ \fB-f\fP|\fB\-\-force\fP ] +[ \fB-f\fP|\fB--force\fP ] .ad b .br .ad l -[ \fB-n\fP|\fB\-\-nofsck\fP ] +[ \fB-n\fP|\fB--nofsck\fP ] .ad b .br .ad l -[ \fB-r\fP|\fB\-\-resizefs\fP ] +[ \fB-r\fP|\fB--resizefs\fP ] .ad b .br .ad l -[ \fB\-\-noudevsync\fP ] +[ \fB--noudevsync\fP ] .ad b .br .ad l -[ \fB\-\-reportformat\fP \fBbasic\fP|\fBjson\fP ] +[ \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ] .ad b .br [ COMMON_OPTIONS ] @@ -66,71 +66,71 @@ Common options for lvm: . .RS 4 .ad l -[ \fB-d\fP|\fB\-\-debug\fP ] +[ \fB-d\fP|\fB--debug\fP ] .ad b .br .ad l -[ \fB-h\fP|\fB\-\-help\fP ] +[ \fB-h\fP|\fB--help\fP ] .ad b .br .ad l -[ \fB-q\fP|\fB\-\-quiet\fP ] +[ \fB-q\fP|\fB--quiet\fP ] .ad b .br .ad l -[ \fB-t\fP|\fB\-\-test\fP ] +[ \fB-t\fP|\fB--test\fP ] .ad b .br .ad l -[ \fB-v\fP|\fB\-\-verbose\fP ] +[ \fB-v\fP|\fB--verbose\fP ] .ad b .br .ad l -[ \fB-y\fP|\fB\-\-yes\fP ] +[ \fB-y\fP|\fB--yes\fP ] .ad b .br .ad l -[ \fB\-\-commandprofile\fP \fIString\fP ] +[ \fB--commandprofile\fP \fIString\fP ] .ad b .br .ad l -[ \fB\-\-config\fP \fIString\fP ] +[ \fB--config\fP \fIString\fP ] .ad b .br .ad l -[ \fB\-\-driverloaded\fP \fBy\fP|\fBn\fP ] +[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ] .ad b .br .ad l -[ \fB\-\-longhelp\fP ] +[ \fB--longhelp\fP ] .ad b .br .ad l -[ \fB\-\-profile\fP \fIString\fP ] +[ \fB--profile\fP \fIString\fP ] .ad b .br .ad l -[ \fB\-\-version\fP ] +[ \fB--version\fP ] .ad b .RE .SH OPTIONS .HP .ad l -\fB-A\fP|\fB\-\-autobackup\fP \fBy\fP|\fBn\fP +\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP .br Specifies if metadata should be backed up automatically after a change. Enabling this is strongly advised! See vgcfgbackup(8) for more information. .ad b .HP .ad l -\fB\-\-commandprofile\fP \fIString\fP +\fB--commandprofile\fP \fIString\fP .br The command profile to use for command configuration. See \fBlvm.conf\fP(5) for more information about profiles. .ad b .HP .ad l -\fB\-\-config\fP \fIString\fP +\fB--config\fP \fIString\fP .br Config settings for the command. These override lvm.conf settings. The String arg uses the same format as lvm.conf, @@ -139,24 +139,24 @@ See \fBlvm.conf\fP(5) for more information about config. .ad b .HP .ad l -\fB-d\fP|\fB\-\-debug\fP ... +\fB-d\fP|\fB--debug\fP ... .br Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). .ad b .HP .ad l -\fB\-\-driverloaded\fP \fBy\fP|\fBn\fP +\fB--driverloaded\fP \fBy\fP|\fBn\fP .br If set to no, the command will not attempt to use device-mapper. For testing and debugging. .ad b .HP .ad l -\fB-l\fP|\fB\-\-extents\fP [\fB-\fP]\fINumber\fP[PERCENT] +\fB-l\fP|\fB--extents\fP [\fB-\fP]\fINumber\fP[PERCENT] .br Specifies the new size of the LV in logical extents. -The \-\-size and \-\-extents options are alternate methods of specifying size. +The --size and --extents options are alternate methods of specifying size. The total number of physical extents used will be greater when redundant data is needed for RAID levels. An alternate syntax allows the size to be determined indirectly @@ -176,34 +176,34 @@ from the current size. .ad b .HP .ad l -\fB-f\fP|\fB\-\-force\fP ... +\fB-f\fP|\fB--force\fP ... .br Override various checks, confirmations and protections. Use with extreme caution. .ad b .HP .ad l -\fB-h\fP|\fB\-\-help\fP +\fB-h\fP|\fB--help\fP .br Display help text. .ad b .HP .ad l -\fB\-\-longhelp\fP +\fB--longhelp\fP .br Display long help text. .ad b .HP .ad l -\fB-n\fP|\fB\-\-nofsck\fP +\fB-n\fP|\fB--nofsck\fP .br Do not perform fsck before resizing filesystem when filesystem -requires it. You may need to use \-\-force to proceed with +requires it. You may need to use --force to proceed with this option. .ad b .HP .ad l -\fB\-\-noudevsync\fP +\fB--noudevsync\fP .br Disables udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of any possible udev processing @@ -212,21 +212,21 @@ ignore the devices LVM creates. .ad b .HP .ad l -\fB\-\-profile\fP \fIString\fP +\fB--profile\fP \fIString\fP .br -An alias for \-\-commandprofile or \-\-metadataprofile, depending +An alias for --commandprofile or --metadataprofile, depending on the command. .ad b .HP .ad l -\fB-q\fP|\fB\-\-quiet\fP ... +\fB-q\fP|\fB--quiet\fP ... .br -Suppress output and log messages. Overrides \-\-debug and \-\-verbose. +Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer no. .ad b .HP .ad l -\fB\-\-reportformat\fP \fBbasic\fP|\fBjson\fP +\fB--reportformat\fP \fBbasic\fP|\fBjson\fP .br Overrides current output format for reports which is defined globally by the report/output_format setting in lvm.conf. @@ -237,16 +237,16 @@ output in JSON format. See \fBlvmreport\fP(7) for more information. .ad b .HP .ad l -\fB-r\fP|\fB\-\-resizefs\fP +\fB-r\fP|\fB--resizefs\fP .br Resize underlying filesystem together with the LV using fsadm(8). .ad b .HP .ad l -\fB-L\fP|\fB\-\-size\fP [\fB-\fP]\fISize\fP[m|UNIT] +\fB-L\fP|\fB--size\fP [\fB-\fP]\fISize\fP[m|UNIT] .br Specifies the new size of the LV. -The \-\-size and \-\-extents options are alternate methods of specifying size. +The --size and --extents options are alternate methods of specifying size. The total number of physical extents used will be greater when redundant data is needed for RAID levels. When the plus \fB+\fP or minus \fB-\fP prefix is used, @@ -255,7 +255,7 @@ from the current size. .ad b .HP .ad l -\fB-t\fP|\fB\-\-test\fP +\fB-t\fP|\fB--test\fP .br Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless @@ -265,20 +265,20 @@ back metadata it believes has changed but hasn't. .ad b .HP .ad l -\fB-v\fP|\fB\-\-verbose\fP ... +\fB-v\fP|\fB--verbose\fP ... .br Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr. .ad b .HP .ad l -\fB\-\-version\fP +\fB--version\fP .br Display version information. .ad b .HP .ad l -\fB-y\fP|\fB\-\-yes\fP +\fB-y\fP|\fB--yes\fP .br Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. @@ -305,7 +305,7 @@ UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP. b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes, m|M is megabytes, g|G is gigabytes, t|T is terabytes, p|P is petabytes, e|E is exabytes. -(This should not be confused with the output control \-\-units, where +(This should not be confused with the output control --units, where capital letters mean multiple of 1000.) .SH ENVIRONMENT VARIABLES See \fBlvm\fP(8) for information about environment variables used by lvm. @@ -314,7 +314,7 @@ For example, LVM_VG_NAME can generally be substituted for a required VG paramete Reduce the size of an LV by 3 logical extents: .br -.B lvreduce \-l \-3 vg00/lvol1 +.B lvreduce -l -3 vg00/lvol1 .SH SEE ALSO .BR lvm (8) |