From 0c6faaab4321ff91672ad818c47b8120d2b14180 Mon Sep 17 00:00:00 2001
From: David Teigland <teigland@redhat.com>
Date: Thu, 19 Feb 2015 11:33:23 -0600
Subject: doc: explanation of caching foreign VGs

---
 doc/caching_foreign_vgs.txt | 86 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100644 doc/caching_foreign_vgs.txt

(limited to 'doc')

diff --git a/doc/caching_foreign_vgs.txt b/doc/caching_foreign_vgs.txt
new file mode 100644
index 000000000..12ffecab4
--- /dev/null
+++ b/doc/caching_foreign_vgs.txt
@@ -0,0 +1,86 @@
+Q: Why should lvmetad cache foreign VGs?
+A: It's the most useful behavior in the "steady state".
+
+How to arrive at that conclusion.
+Four code configurations to consider, each in two different circumstances.
+
+configurations:
+
+1. lvm not using lvmetad
+2. lvm using lvmetad and lvmlockd
+3. lvm using lvmetad, and lvmetad does not cache foreign VGs
+   (Not currently implemented.)
+4. lvm using lvmetad, and lvmetad caches foreign VGs
+
+circumstances:
+
+A. steady state: PVs are not added or removed to/from foreign VGs
+B. transient state: PVs are added or removed to/from foreign VGs
+
+combinations:
+
+1.A. A PV is correctly shown in the foreign VG.
+1.B. A PV is correctly shown in the foreign VG.
+
+The most accurate representation, at the cost of always scanning disks.
+
+
+2.A. A PV is correctly shown in the foreign VG.
+2.B. A PV is correctly shown in the foreign VG.
+
+The most accurate representation, at the cost of using lvmlockd.
+
+
+3.A. A PV in a foreign VG is shown as unused.
+3.B. A PV in a foreign VG is shown as unused.
+
+If lvmetad ignores foreign VGs and does not cache them, the PVs in the
+foreign VGs appear to be unused.  This largely defeats the purpose of
+system_id, which is meant to treat VGs/PVs as foreign instead of free
+(albeit imperfectly, see below.)
+
+
+4.A. A PV is correctly shown in the foreign VG.
+4.B. A PV is not correctly shown in the foreign VG.
+
+This avoids the cost of always scanning disks, and avoids the cost of
+using lvmlockd.  The steady state 4.A. is an improvement over the steady
+state 3.A.  When the steady state is the common case, this is a big
+advantage.  When the steady state is *not* the common case, the foreign VG
+concept is not as useful (if shared devices are this dynamic, lvmlockd
+should be considered.)
+
+The limitations related to the transient state 4.B. are explained in
+lvmsystemid(7), along with how to handle it.  The specific inaccuracies
+possible in 4.B. are:
+
+. PV is shown as belonging to a foreign VG, but is actually unused.
+. PV is shown as unused, but actually belongs to a foreign VG.
+
+To resolve the inaccuracies in the transient state (4.B.), and return the
+system to an accurate steady state (4.A.), the disks need to be scanned,
+which updates lvmetad.  The scanning/updating is a manual step, i.e.
+running 'pvscan --cache', which by definition scans disks and updates
+lvmetad.
+
+--
+
+The --foreign command line option for report/display commands
+(vgs/lvs/pvs/vgdisplay/lvdisplay/pvdisplay) is not directly related to
+whether or not lvmetad caches foreign VGs.
+
+By default, foreign VGs are silently ignored and not printed by these
+commands.  However, when the --foreign option is used, these commands do
+produce output about foreign VGs.
+
+(When --foreign is not used, and the command specifically requests a
+foreign VG by name, an error is produced about not accessing foreign VGs,
+and the foreign VG is not displayed.)
+
+The decision to report/display foreign VGs or not is independent of
+whether lvmetad is caching those VGs.  When lvmetad is caching the foreign
+VG, a report/display command run with --foreign will scan disks to read
+the foreign VG and give the most up to date version of it (the copy of the
+foreign VG in lvmetad may be out of date due to changes to the VG by the
+foreign host.)
+
-- 
cgit v1.2.1