Merge hundin:/my/mysql-4.0 into bitch.mysql.fi:/my/mysql-4.0

29 files changed, 490 insertions, 407 deletions

diff --git a/BUILD/compile-solaris-sparc-debug b/BUILD/compile-solaris-sparc-debug
new file mode 100755
index 00000000000..0b6a7219593
--- /dev/null
+++ b/BUILD/compile-solaris-sparc-debug
@@ -0,0 +1,16 @@
+#! /bin/sh
+
+gmake -k clean || true
+/bin/rm -f */.deps/*.P config.cache
+ 
+aclocal && autoheader && aclocal && automake && autoconf
+(cd bdb/dist && sh s_all)
+(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
+if [ -d gemini ]
+then
+   (cd gemini && aclocal && autoheader && aclocal && automake && autoconf)
+fi
+ 
+CFLAGS="-g -Wimplicit -Wreturn-type -Wid-clash-51 -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wimplicit-function-dec -Wimplicit-int -Wparentheses -Wsign-compare -Wwrite-strings -Wunused  -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa" CXX=gcc CXXFLAGS="-Wimplicit -Wreturn-type -Wid-clash-51 -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wimplicit-function-dec -Wimplicit-int -Wparentheses -Wsign-compare -Wwrite-strings -Woverloaded-virtual -Wextern-inline -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti  -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa -g" ./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-debug
+
+gmake -j 4
diff --git a/include/my_global.h b/include/my_global.h
index 53227d14c8c..b22ef84f977 100644
--- a/include/my_global.h
+++ b/include/my_global.h
@@ -324,11 +324,6 @@ typedef unsigned short ushort;
 #endif
 
 #include <dbug.h>
-#ifndef DBUG_OFF
-#define dbug_assert(A) assert(A)
-#else
-#define dbug_assert(A)
-#endif
 
 #define MIN_ARRAY_SIZE	0	/* Zero or One. Gcc allows zero*/
 #define ASCII_BITS_USED 8	/* Bit char used */
diff --git a/include/my_sys.h b/include/my_sys.h
index cc5bdc104f8..2a5dfb4d184 100644
--- a/include/my_sys.h
+++ b/include/my_sys.h
@@ -293,33 +293,21 @@ typedef struct st_dynamic_string {
 struct st_io_cache;
 typedef int (*IO_CACHE_CALLBACK)(struct st_io_cache*);
 
-#ifdef THREAD
-#define lock_append_buffer(info) \
- pthread_mutex_lock(&(info)->append_buffer_lock)
-#define unlock_append_buffer(info) \
- pthread_mutex_unlock(&(info)->append_buffer_lock)
-#else
-#define lock_append_buffer(info)
-#define unlock_append_buffer(info)
-#endif
 
 typedef struct st_io_cache		/* Used when cacheing files */
 {
   my_off_t pos_in_file,end_of_file;
-  byte	*rc_pos,*rc_end,*buffer,*rc_request_pos;
-  my_bool alloced_buffer; /* currented READ_NET is the only one
-			     that will use a buffer allocated somewhere
-			     else
-			   */
-  byte *append_buffer, *append_read_pos, *write_pos, *append_end,
-    *write_end;
-/* for append buffer used in READ_APPEND cache */
+  byte	*read_pos,*read_end,*buffer,*request_pos;
+  byte  *write_buffer, *append_read_pos, *write_pos, *write_end;
+  byte  **current_pos, **current_end;
+/* The lock is for append buffer used in READ_APPEND cache */
 #ifdef THREAD
   pthread_mutex_t append_buffer_lock;
   /* need mutex copying from append buffer to read buffer */
 #endif  
   int (*read_function)(struct st_io_cache *,byte *,uint);
   int (*write_function)(struct st_io_cache *,const byte *,uint);
+  enum cache_type type;
   /* callbacks when the actual read I/O happens */
   IO_CACHE_CALLBACK pre_read;
   IO_CACHE_CALLBACK post_read;
@@ -331,7 +319,11 @@ typedef struct st_io_cache		/* Used when cacheing files */
   int	seek_not_done,error;
   uint	buffer_length,read_length;
   myf	myflags;			/* Flags used to my_read/my_write */
-  enum cache_type type;
+ /*
+   Currently READ_NET is the only one that will use a buffer allocated
+   somewhere else
+ */
+  my_bool alloced_buffer;
 #ifdef HAVE_AIOWAIT
   uint inited;
   my_off_t aio_read_pos;
@@ -349,9 +341,9 @@ typedef int (*qsort2_cmp)(const void *, const void *, const void *);
 #define my_b_EOF INT_MIN
 
 #define my_b_read(info,Buffer,Count) \
-  ((info)->rc_pos + (Count) <= (info)->rc_end ?\
-   (memcpy(Buffer,(info)->rc_pos,(size_t) (Count)), \
-    ((info)->rc_pos+=(Count)),0) :\
+  ((info)->read_pos + (Count) <= (info)->read_end ?\
+   (memcpy(Buffer,(info)->read_pos,(size_t) (Count)), \
+    ((info)->read_pos+=(Count)),0) :\
    (*(info)->read_function)((info),Buffer,Count))
 
 #define my_b_write(info,Buffer,Count) \
@@ -362,11 +354,10 @@ typedef int (*qsort2_cmp)(const void *, const void *, const void *);
  
 
 #define my_b_get(info) \
-  ((info)->rc_pos != (info)->rc_end ?\
-   ((info)->rc_pos++, (int) (uchar) (info)->rc_pos[-1]) :\
+  ((info)->read_pos != (info)->read_end ?\
+   ((info)->read_pos++, (int) (uchar) (info)->read_pos[-1]) :\
    _my_b_get(info))
 
-
 	/* my_b_write_byte dosn't have any err-check */
 #define my_b_write_byte(info,chr) \
   (((info)->write_pos < (info)->write_end) ?\
@@ -374,18 +365,14 @@ typedef int (*qsort2_cmp)(const void *, const void *, const void *);
    (_my_b_write(info,0,0) , ((*(info)->write_pos++)=(chr))))
 
 #define my_b_fill_cache(info) \
-  (((info)->rc_end=(info)->rc_pos),(*(info)->read_function)(info,0,0))
-
-#define my_write_cache(info) (((info)->type == WRITE_CACHE))
-#define my_cache_pointer(info)  (my_write_cache(info) ? \
-               ((info)->write_pos) : ((info)->rc_pos))
+  (((info)->read_end=(info)->read_pos),(*(info)->read_function)(info,0,0))
 
 #define my_b_tell(info) ((info)->pos_in_file + \
-			 my_cache_pointer(info) - (info)->rc_request_pos)
+			 (uint) (*(info)->current_pos - (info)->request_pos))
+
+#define my_b_bytes_in_cache(info) (uint) (*(info)->current_end - \
+					  *(info)->current_pos)
 
-#define my_b_bytes_in_cache(info) (my_write_cache(info) ? \
- ((uint) ((info)->write_end - (info)->write_pos)): \
- ((uint) ((info)->rc_end - (info)->rc_pos)))
 
 typedef struct st_changeable_var {
   const char *name;			/* Name of variable */
@@ -584,7 +571,7 @@ extern int _my_b_net_read(IO_CACHE *info,byte *Buffer,uint Count);
 extern int _my_b_get(IO_CACHE *info);
 extern int _my_b_async_read(IO_CACHE *info,byte *Buffer,uint Count);
 extern int _my_b_write(IO_CACHE *info,const byte *Buffer,uint Count);
-extern int _my_b_append(IO_CACHE *info,const byte *Buffer,uint Count);
+extern int my_b_append(IO_CACHE *info,const byte *Buffer,uint Count);
 extern int my_block_write(IO_CACHE *info, const byte *Buffer,
 			  uint Count, my_off_t pos);
 extern int flush_io_cache(IO_CACHE *info);
diff --git a/isam/_cache.c b/isam/_cache.c
index 53619126660..9383c04dfbc 100644
--- a/isam/_cache.c
+++ b/isam/_cache.c
@@ -46,11 +46,11 @@ int _nisam_read_cache(IO_CACHE *info, byte *buff, ulong pos, uint length,
     buff+=read_length;
   }
   if ((offset=pos - (ulong) info->pos_in_file) <
-      (ulong) (info->rc_end - info->rc_request_pos))
+      (ulong) (info->read_end - info->request_pos))
   {
-    in_buff_pos=info->rc_request_pos+(uint) offset;
-    in_buff_length= min(length,(uint) (info->rc_end-in_buff_pos));
-    memcpy(buff,info->rc_request_pos+(uint) offset,(size_t) in_buff_length);
+    in_buff_pos=info->request_pos+(uint) offset;
+    in_buff_length= min(length,(uint) (info->read_end-in_buff_pos));
+    memcpy(buff,info->request_pos+(uint) offset,(size_t) in_buff_length);
     if (!(length-=in_buff_length))
       return 0;
     pos+=in_buff_length;
@@ -61,14 +61,14 @@ int _nisam_read_cache(IO_CACHE *info, byte *buff, ulong pos, uint length,
   if (flag & READING_NEXT)
   {
     if (pos != ((info)->pos_in_file +
-		(uint) ((info)->rc_end - (info)->rc_request_pos)))
+		(uint) ((info)->read_end - (info)->request_pos)))
     {
       info->pos_in_file=pos;				/* Force start here */
-      info->rc_pos=info->rc_end=info->rc_request_pos;	/* Everything used */
+      info->read_pos=info->read_end=info->request_pos;	/* Everything used */
       info->seek_not_done=1;
     }
     else
-      info->rc_pos=info->rc_end;			/* All block used */
+      info->read_pos=info->read_end;			/* All block used */
     if (!(*info->read_function)(info,buff,length))
       return 0;
     if (!(flag & READING_HEADER) || info->error == -1 ||
diff --git a/isam/_statrec.c b/isam/_statrec.c
index d93f4fe27f5..87793907da8 100644
--- a/isam/_statrec.c
+++ b/isam/_statrec.c
@@ -187,7 +187,7 @@ int _nisam_read_rnd_static_record(N_INFO *info, byte *buf,
 	(skipp_deleted_blocks || !filepos))
     {
       cache_read=1;				/* Read record using cache */
-      cache_length=(uint) (info->rec_cache.rc_end - info->rec_cache.rc_pos);
+      cache_length=(uint) (info->rec_cache.read_end - info->rec_cache.read_pos);
     }
     else
       info->rec_cache.seek_not_done=1;		/* Filepos is changed */
diff --git a/isam/test3.c b/isam/test3.c
index 935c194106d..95e1a2a68cd 100644
--- a/isam/test3.c
+++ b/isam/test3.c
@@ -172,7 +172,7 @@ void start_test(int id)
   }
   if (key_cacheing && rnd(2) == 0)
     init_key_cache(65536L,(uint) IO_SIZE*4*10);
-  printf("Process %d, pid: %d\n",id,getpid()); fflush(stdout);
+  printf("Process %d, pid: %d\n",id,(int) getpid()); fflush(stdout);
 
   for (error=i=0 ; i < tests && !error; i++)
   {
@@ -356,7 +356,7 @@ int test_write(N_INFO *file,int id,int lock_type)
       nisam_extra(file,HA_EXTRA_WRITE_CACHE);
   }
 
-  sprintf(record.id,"%7d",getpid());
+  sprintf(record.id,"%7d",(int) getpid());
   strmov(record.text,"Testing...");
 
   tries=(uint) rnd(100)+10;
diff --git a/myisam/mi_cache.c b/myisam/mi_cache.c
index 6c23916c645..18a56870e78 100644
--- a/myisam/mi_cache.c
+++ b/myisam/mi_cache.c
@@ -45,11 +45,11 @@ int _mi_read_cache(IO_CACHE *info, byte *buff, my_off_t pos, uint length,
     buff+=read_length;
   }
   if ((offset= (my_off_t) (pos - info->pos_in_file)) <
-      (my_off_t) (info->rc_end - info->rc_request_pos))
+      (my_off_t) (info->read_end - info->request_pos))
   {
-    in_buff_pos=info->rc_request_pos+(uint) offset;
-    in_buff_length= min(length,(uint) (info->rc_end-in_buff_pos));
-    memcpy(buff,info->rc_request_pos+(uint) offset,(size_t) in_buff_length);
+    in_buff_pos=info->request_pos+(uint) offset;
+    in_buff_length= min(length,(uint) (info->read_end-in_buff_pos));
+    memcpy(buff,info->request_pos+(uint) offset,(size_t) in_buff_length);
     if (!(length-=in_buff_length))
       DBUG_RETURN(0);
     pos+=in_buff_length;
@@ -60,14 +60,14 @@ int _mi_read_cache(IO_CACHE *info, byte *buff, my_off_t pos, uint length,
   if (flag & READING_NEXT)
   {
     if (pos != ((info)->pos_in_file +
-		(uint) ((info)->rc_end - (info)->rc_request_pos)))
+		(uint) ((info)->read_end - (info)->request_pos)))
     {
       info->pos_in_file=pos;				/* Force start here */
-      info->rc_pos=info->rc_end=info->rc_request_pos;	/* Everything used */
+      info->read_pos=info->read_end=info->request_pos;	/* Everything used */
       info->seek_not_done=1;
     }
     else
-      info->rc_pos=info->rc_end;			/* All block used */
+      info->read_pos=info->read_end;			/* All block used */
     if (!(*info->read_function)(info,buff,length))
       DBUG_RETURN(0);
     if (!(flag & READING_HEADER) || info->error == -1 ||
diff --git a/myisam/mi_statrec.c b/myisam/mi_statrec.c
index 2712c125f4e..4155a130fa7 100644
--- a/myisam/mi_statrec.c
+++ b/myisam/mi_statrec.c
@@ -221,7 +221,7 @@ int _mi_read_rnd_static_record(MI_INFO *info, byte *buf,
 	(skipp_deleted_blocks || !filepos))
     {
       cache_read=1;				/* Read record using cache */
-      cache_length=(uint) (info->rec_cache.rc_end - info->rec_cache.rc_pos);
+      cache_length=(uint) (info->rec_cache.read_end - info->rec_cache.read_pos);
     }
     else
       info->rec_cache.seek_not_done=1;		/* Filepos is changed */
diff --git a/mysql-test/mysql-test-run.sh b/mysql-test/mysql-test-run.sh
index 871ba10b721..13548be834c 100644
--- a/mysql-test/mysql-test-run.sh
+++ b/mysql-test/mysql-test-run.sh
@@ -19,7 +19,7 @@ TZ=GMT-3; export TZ # for UNIX_TIMESTAMP tests to work
 # Program Definitions
 #--
 
-PATH=/bin:/usr/bin:/usr/local/bin:/usr/bsd:/usr/X11R6/bin
+PATH=/bin:/usr/bin:/usr/local/bin:/usr/bsd:/usr/X11R6/bin:/usr/openwin/bin
 
 # Standard functions
 
@@ -49,6 +49,7 @@ BASENAME=`which basename | head -1`
 DIFF=`which diff | head -1`
 CAT=cat
 CUT=cut
+HEAD=head
 TAIL=tail
 ECHO=echo # use internal echo if possible
 EXPR=expr # use internal if possible
@@ -118,7 +119,7 @@ MYSQLD_SRC_DIRS="strings mysys include extra regex isam merge myisam \
 #
 # Set LD_LIBRARY_PATH if we are using shared libraries
 #
-LD_LIBRARY_PATH="$BASEDIR/lib:$LD_LIBRARY_PATH"
+LD_LIBRARY_PATH="$BASEDIR/lib:$BASEDIR/libmysql/.libs:$LD_LIBRARY_PATH"
 export LD_LIBRARY_PATH
 
 MASTER_RUNNING=0
@@ -225,6 +226,8 @@ while test $# -gt 0; do
 	$ECHO "Note: you will get more meaningful output on a source distribution compiled with debugging option when running tests with --gdb option"
       fi
       DO_GDB=1
+      # We must use manager, as things doesn't work on Linux without it
+      USE_MANAGER=1
       USE_RUNNING_SERVER=""
       ;;
     --client-gdb )
@@ -310,6 +313,8 @@ if [ x$SOURCE_DIST = x1 ] ; then
  MYSQLD="$BASEDIR/sql/mysqld"
  if [ -f "$BASEDIR/client/.libs/lt-mysqltest" ] ; then
    MYSQL_TEST="$BASEDIR/client/.libs/lt-mysqltest"
+ elif [ -f "$BASEDIR/client/.libs/mysqltest" ] ; then
+   MYSQL_TEST="$BASEDIR/client/.libs/mysqltest"
  else
    MYSQL_TEST="$BASEDIR/client/mysqltest"
  fi
@@ -428,7 +433,7 @@ do_gdb_test ()
   $ECHO "set args $mysql_test_args < $2" > $GDB_CLIENT_INIT
   echo "Set breakpoints ( if needed) and type 'run' in gdb window"
   #this xterm should not be backgrounded
-  xterm -title "Client" -e gdb -x $GDB_CLIENT_INIT $MYSQL_TEST_BIN
+  $XTERM -title "Client" -e gdb -x $GDB_CLIENT_INIT $MYSQL_TEST_BIN
 }
 
 error () {
@@ -437,7 +442,7 @@ error () {
 }
 
 error_is () {
-    $TR "\n" " " < $TIMEFILE | $SED -e 's/.* At line \(.*\)\: \(.*\)Command .*$/   \>\> Error at line \1: \2<\</'
+    $CAT < $TIMEFILE | $SED -e 's/.* At line \(.*\)\: \(.*\)/   \>\> Error at line \1: \2<\</' | $HEAD -1
 }
 
 prefix_to_8() {
@@ -802,8 +807,8 @@ start_slave()
     elif [ x$DO_GDB = x1 ]
     then
       $ECHO "set args $slave_args" > $GDB_SLAVE_INIT
-      manager_launch $slave_ident $XTERM -display $DISPLAY -title "Slave" -e gdb -x \
-       $GDB_SLAVE_INIT $SLAVE_MYSQLD 
+      manager_launch $slave_ident $XTERM -display $DISPLAY -title "Slave" -e \
+      gdb -x $GDB_SLAVE_INIT $SLAVE_MYSQLD 
     else
       manager_launch $slave_ident $SLAVE_MYSQLD $slave_args
     fi
diff --git a/mysql-test/r/isam.result b/mysql-test/r/isam.result
index d80f47d3483..baeda5537e5 100644
--- a/mysql-test/r/isam.result
+++ b/mysql-test/r/isam.result
@@ -1,21 +1,9 @@
 drop table if exists t1,t2;
-create table t1 (a tinyint not null auto_increment, b blob not null, primary key (a));
-check table t1;
-Table	Op	Msg_type	Msg_text
-test.t1	check	status	OK
-repair table t1;
-Table	Op	Msg_type	Msg_text
-test.t1	repair	status	OK
+create table t1 (a tinyint not null auto_increment, b blob not null, primary key (a)) type=isam;
 delete from t1 where (a & 1);
-check table t1;
-Table	Op	Msg_type	Msg_text
-test.t1	check	status	OK
-repair table t1;
-Table	Op	Msg_type	Msg_text
-test.t1	repair	status	OK
-check table t1;
-Table	Op	Msg_type	Msg_text
-test.t1	check	status	OK
+select sum(length(b)) from t1;
+sum(length(b))
+3274494
 drop table t1;
 create table t1 (a int not null auto_increment,b int, primary key (a)) type=isam;
 insert into t1 values (1,1),(NULL,2),(3,3),(NULL,4);
diff --git a/mysql-test/t/isam.test b/mysql-test/t/isam.test
index 5b3ab7647c7..c7308c4b999 100644
--- a/mysql-test/t/isam.test
+++ b/mysql-test/t/isam.test
@@ -6,7 +6,7 @@ drop table if exists t1,t2;
 # Test possible problem with rows that are about 65535 bytes long
 #
 
-create table t1 (a tinyint not null auto_increment, b blob not null, primary key (a));
+create table t1 (a tinyint not null auto_increment, b blob not null, primary key (a)) type=isam;
 
 let $1=100;
 disable_query_log;
@@ -16,12 +16,8 @@ while ($1)
   dec $1;
 }
 enable_query_log;
-check table t1;
-repair table t1;
 delete from t1 where (a & 1);
-check table t1;
-repair table t1;
-check table t1;
+select sum(length(b)) from t1;
 drop table t1;
 
 #
diff --git a/mysys/mf_iocache.c b/mysys/mf_iocache.c
index f29df74b651..b0868851177 100644
--- a/mysys/mf_iocache.c
+++ b/mysys/mf_iocache.c
@@ -1,15 +1,15 @@
 /* Copyright (C) 2000 MySQL AB & MySQL Finland AB & TCX DataKonsult AB
-   
+
    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Library General Public
    License as published by the Free Software Foundation; either
    version 2 of the License, or (at your option) any later version.
-   
+
    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Library General Public License for more details.
-   
+
    You should have received a copy of the GNU Library General Public
    License along with this library; if not, write to the Free
    Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
@@ -23,12 +23,30 @@
   Possibly use of asyncronic io.
   macros for read and writes for faster io.
   Used instead of FILE when reading or writing whole files.
-  This will make mf_rec_cache obsolete.
+  This code makes mf_rec_cache obsolete (currently only used by ISAM)
   One can change info->pos_in_file to a higher value to skip bytes in file if
-  also info->rc_pos is set to info->rc_end.
+  also info->read_pos is set to info->read_end.
   If called through open_cached_file(), then the temporary file will
   only be created if a write exeeds the file buffer or if one calls
-  flush_io_cache().  
+  flush_io_cache().
+
+  If one uses SEQ_READ_APPEND, then two buffers are allocated, one for
+  reading and another for writing.  Reads are first done from disk and
+  then done from the write buffer.  This is an efficient way to read
+  from a log file when one is writing to it at the same time.
+  For this to work, the file has to be opened in append mode!
+  Note that when one uses SEQ_READ_APPEND, one MUST write using
+  my_b_append !  This is needed because we need to lock the mutex
+  every time we access the write buffer.
+
+TODO:
+  When one SEQ_READ_APPEND and we are reading and writing at the same time,
+  each time the write buffer gets full and it's written to disk, we will
+  always do a disk read to read a part of the buffer from disk to the
+  read buffer.
+  This should be fixed so that when we do a flush_io_cache() and
+  we have been reading the write buffer, we should transfer the rest of the
+  write buffer to the read buffer before we start to reuse it.
 */
 
 #define MAP_TO_USE_RAID
@@ -41,18 +59,20 @@ static void my_aiowait(my_aio_result *result);
 #include <assert.h>
 #include <errno.h>
 
-#ifdef MAIN
-#include <my_dir.h>
+#ifdef THREAD
+#define lock_append_buffer(info) \
+ pthread_mutex_lock(&(info)->append_buffer_lock)
+#define unlock_append_buffer(info) \
+ pthread_mutex_unlock(&(info)->append_buffer_lock)
+#else
+#define lock_append_buffer(info)
+#define unlock_append_buffer(info)
 #endif
 
-static void init_read_function(IO_CACHE* info, enum cache_type type);
-static void init_write_function(IO_CACHE* info, enum cache_type type);
-
-static void init_read_function(IO_CACHE* info, enum cache_type type)
+static void
+init_functions(IO_CACHE* info, enum cache_type type)
 {
-  switch (type)
-  {
-#ifndef MYSQL_CLIENT    
+  switch (type) {
   case READ_NET:
     /* must be initialized by the caller. The problem is that
        _my_b_net_read has to be defined in sql directory because of
@@ -61,24 +81,25 @@ static void init_read_function(IO_CACHE* info, enum cache_type type)
        as myisamchk
     */
     break;
-#endif
   case SEQ_READ_APPEND:
     info->read_function = _my_b_seq_read;
+    info->write_function = 0;			/* Force a core if used */
     break;
   default:
     info->read_function = _my_b_read;
+    info->write_function = _my_b_write;
   }
-}
 
-static void init_write_function(IO_CACHE* info, enum cache_type type)
-{
-  switch (type)
+  /* Ensure that my_b_tell() and my_b_bytes_in_cache works */
+  if (type == WRITE_CACHE)
   {
-  case SEQ_READ_APPEND:
-    info->write_function = _my_b_append;
-    break;
-  default:
-    info->write_function = _my_b_write;
+    info->current_pos= &info->write_pos;
+    info->current_end= &info->write_end;
+  }
+  else
+  {
+    info->current_pos= &info->read_pos;
+    info->current_end= &info->read_end;
   }
 }
 
@@ -93,62 +114,61 @@ int init_io_cache(IO_CACHE *info, File file, uint cachesize,
 		  pbool use_async_io, myf cache_myflags)
 {
   uint min_cache;
+  my_off_t end_of_file= ~(my_off_t) 0;
   DBUG_ENTER("init_io_cache");
   DBUG_PRINT("enter",("type: %d  pos: %ld",(int) type, (ulong) seek_offset));
 
-  /* There is no file in net_reading */
   info->file= file;
+  info->type=type;
+  info->pos_in_file= seek_offset;
   info->pre_close = info->pre_read = info->post_read = 0;
   info->arg = 0;
+  info->alloced_buffer = 0;
+  info->buffer=0;
+  info->seek_not_done= test(file >= 0);
+
   if (!cachesize)
     if (! (cachesize= my_default_record_cache_size))
       DBUG_RETURN(1);				/* No cache requested */
   min_cache=use_async_io ? IO_SIZE*4 : IO_SIZE*2;
-  info->alloced_buffer = 0;
   if (type == READ_CACHE || type == SEQ_READ_APPEND)
   {						/* Assume file isn't growing */
-    if (cache_myflags & MY_DONT_CHECK_FILESIZE)
+    if (!(cache_myflags & MY_DONT_CHECK_FILESIZE))
     {
-      cache_myflags &= ~MY_DONT_CHECK_FILESIZE;
-    }
-    else
-    {
-      my_off_t file_pos,end_of_file;
-      if ((file_pos=my_tell(file,MYF(0)) == MY_FILEPOS_ERROR))
-	DBUG_RETURN(1);
+      /* Calculate end of file to not allocate to big buffers */
       end_of_file=my_seek(file,0L,MY_SEEK_END,MYF(0));
       if (end_of_file < seek_offset)
 	end_of_file=seek_offset;
-      VOID(my_seek(file,file_pos,MY_SEEK_SET,MYF(0)));
-      /* Trim cache size if the file is very small.
-	 However, we should not do this with SEQ_READ_APPEND cache
-      */
-      if (type != SEQ_READ_APPEND &&
-	  (my_off_t) cachesize > end_of_file-seek_offset+IO_SIZE*2-1)
+      /* Trim cache size if the file is very small */
+      if ((my_off_t) cachesize > end_of_file-seek_offset+IO_SIZE*2-1)
       {
 	cachesize=(uint) (end_of_file-seek_offset)+IO_SIZE*2-1;
 	use_async_io=0;				/* No need to use async */
       }
     }
   }
-  if ((int) type < (int) READ_NET)
+  cache_myflags &= ~MY_DONT_CHECK_FILESIZE;
+  if (type != READ_NET && type != WRITE_NET)
   {
-    uint buffer_block;
+    /* Retry allocating memory in smaller blocks until we get one */
     for (;;)
     {
-      buffer_block = cachesize=(uint) ((ulong) (cachesize + min_cache-1) &
+      uint buffer_block;
+      cachesize=(uint) ((ulong) (cachesize + min_cache-1) &
 			(ulong) ~(min_cache-1));
-      if (type == SEQ_READ_APPEND)
-	buffer_block *= 2;
       if (cachesize < min_cache)
 	cachesize = min_cache;
+      buffer_block = cachesize;
+      if (type == SEQ_READ_APPEND)
+	buffer_block *= 2;
       if ((info->buffer=
 	   (byte*) my_malloc(buffer_block,
 			     MYF((cache_myflags & ~ MY_WME) |
 				 (cachesize == min_cache ? MY_WME : 0)))) != 0)
       {
+	info->write_buffer=info->buffer;
 	if (type == SEQ_READ_APPEND)
-	  info->append_buffer = info->buffer + cachesize;
+	  info->write_buffer = info->buffer + cachesize;
 	info->alloced_buffer=1;
 	break;					/* Enough memory found */
       }
@@ -157,45 +177,30 @@ int init_io_cache(IO_CACHE *info, File file, uint cachesize,
       cachesize= (uint) ((long) cachesize*3/4); /* Try with less memory */
     }
   }
-  else
-    info->buffer=0;
-  
+
   DBUG_PRINT("info",("init_io_cache: cachesize = %u",cachesize));
-  info->pos_in_file= seek_offset;
   info->read_length=info->buffer_length=cachesize;
-  info->seek_not_done= test(file >= 0 && type != READ_FIFO &&
-			    type != READ_NET);
   info->myflags=cache_myflags & ~(MY_NABP | MY_FNABP);
-  info->rc_request_pos=info->rc_pos= info->write_pos = info->buffer;
-  info->write_pos = info->write_end = 0;
+  info->request_pos= info->read_pos= info->write_pos = info->buffer;
   if (type == SEQ_READ_APPEND)
   {
-    info->append_read_pos = info->write_pos = info->append_buffer;
-    info->write_end = info->append_end =
-      info->append_buffer + info->buffer_length;
-#ifdef THREAD    
+    info->append_read_pos = info->write_pos = info->write_buffer;
+    info->write_end = info->write_buffer + info->buffer_length;
+#ifdef THREAD
     pthread_mutex_init(&info->append_buffer_lock,MY_MUTEX_INIT_FAST);
-#endif    
+#endif
   }
 
-  if (type == READ_CACHE || type == SEQ_READ_APPEND ||
-      type == READ_NET || type == READ_FIFO)
-  {
-    info->rc_end=info->buffer;			/* Nothing in cache */
-  }
-  else /* type == WRITE_CACHE */
-  {
+  if (type == WRITE_CACHE)
     info->write_end=
       info->buffer+info->buffer_length- (seek_offset & (IO_SIZE-1));
-    info->write_pos = info->buffer;
-  }
-  /* end_of_file may be changed by user later */
-  info->end_of_file= ((type == READ_NET || type == READ_FIFO ) ? 0
-		      : ~(my_off_t) 0);
-  info->type=type;
+  else
+    info->read_end=info->buffer;		/* Nothing in cache */
+
+  /* End_of_file may be changed by user later */
+  info->end_of_file= end_of_file;
   info->error=0;
-  init_read_function(info,type);
-  init_write_function(info,type);
+  init_functions(info,type);
 #ifdef HAVE_AIOWAIT
   if (use_async_io && ! my_disable_async_io)
   {
@@ -236,8 +241,13 @@ static void my_aiowait(my_aio_result *result)
 }
 #endif
 
-	/* Use this to reset cache to start or other type */
-	/* Some simple optimizing is done when reinit in current buffer */
+
+/*
+  Use this to reset cache to re-start reading or to change the type
+  between READ_CACHE <-> WRITE_CACHE
+  If we are doing a reinit of a cache where we have the start of the file
+  in the cache, we are reusing this memory without flushing it to disk.
+*/
 
 my_bool reinit_io_cache(IO_CACHE *info, enum cache_type type,
 			my_off_t seek_offset,
@@ -245,33 +255,37 @@ my_bool reinit_io_cache(IO_CACHE *info, enum cache_type type,
 			pbool clear_cache)
 {
   DBUG_ENTER("reinit_io_cache");
+  DBUG_PRINT("enter",("type: %d  seek_offset: %lu  clear_cache: %d",
+		      type, (ulong) seek_offset, (int) clear_cache));
 
-  info->seek_not_done= test(info->file >= 0);	/* Seek not done */
+  /* One can't do reinit with the following types */
+  DBUG_ASSERT(type != READ_NET && info->type != READ_NET &&
+	      type != WRITE_NET && info->type != WRITE_NET &&
+	      type != SEQ_READ_APPEND && info->type != SEQ_READ_APPEND);
 
   /* If the whole file is in memory, avoid flushing to disk */
   if (! clear_cache &&
       seek_offset >= info->pos_in_file &&
-      seek_offset <= info->pos_in_file +
-      (uint) (info->rc_end - info->rc_request_pos))
-  {						/* use current buffer */
+      seek_offset <= my_b_tell(info))
+  {
+    /* Reuse current buffer without flushing it to disk */
+    byte *pos;
     if (info->type == WRITE_CACHE && type == READ_CACHE)
     {
-      info->rc_end=info->write_pos;
+      info->read_end=info->write_pos;
       info->end_of_file=my_b_tell(info);
     }
     else if (type == WRITE_CACHE)
     {
       if (info->type == READ_CACHE)
-      {
-	info->write_end=info->buffer+info->buffer_length;
-	info->write_pos=info->rc_pos;
-      }
+	info->write_end=info->write_buffer+info->buffer_length;
       info->end_of_file = ~(my_off_t) 0;
     }
+    pos=info->request_pos+(seek_offset-info->pos_in_file);
     if (type == WRITE_CACHE)
-      info->write_pos=info->rc_request_pos+(seek_offset-info->pos_in_file);
-    else  
-      info->rc_pos=info->rc_request_pos+(seek_offset-info->pos_in_file);
+      info->write_pos=pos;
+    else
+      info->read_pos= pos;
 #ifdef HAVE_AIOWAIT
     my_aiowait(&info->aio_result);		/* Wait for outstanding req */
 #endif
@@ -284,50 +298,35 @@ my_bool reinit_io_cache(IO_CACHE *info, enum cache_type type,
     */
     if (info->type == WRITE_CACHE && type == READ_CACHE)
       info->end_of_file=my_b_tell(info);
-    /* No need to flush cache if we want to reuse it */
-    if ((type != WRITE_CACHE || !clear_cache) && flush_io_cache(info))
+    /* flush cache if we want to reuse it */
+    if (!clear_cache && flush_io_cache(info))
       DBUG_RETURN(1);
-    if (info->pos_in_file != seek_offset)
-    {
-      info->pos_in_file=seek_offset;
-      info->seek_not_done=1;
-    }
-    info->rc_request_pos=info->rc_pos=info->buffer;
-    if (type == READ_CACHE || type == READ_NET || type == READ_FIFO)
+    info->pos_in_file=seek_offset;
+    /* Better to do always do a seek */
+    info->seek_not_done=1;
+    info->request_pos=info->read_pos=info->write_pos=info->buffer;
+    if (type == READ_CACHE)
     {
-      info->rc_end=info->buffer;		/* Nothing in cache */
+      info->read_end=info->buffer;		/* Nothing in cache */
     }
     else
     {
-      info->rc_end=info->buffer+info->buffer_length-
-	(seek_offset & (IO_SIZE-1));
-      info->end_of_file= ((type == READ_NET || type == READ_FIFO) ? 0 :
-			  ~(my_off_t) 0);
+      info->write_end=(info->buffer + info->buffer_length -
+		       (seek_offset & (IO_SIZE-1)));
+      info->end_of_file= ~(my_off_t) 0;
     }
   }
-  if (info->type == SEQ_READ_APPEND)
-  {
-    info->append_read_pos = info->write_pos = info->append_buffer;
-  }
-  if (!info->write_pos)
-    info->write_pos = info->buffer;
-  if (!info->write_end)
-    info->write_end = info->buffer+info->buffer_length-
-      (seek_offset & (IO_SIZE-1));
   info->type=type;
   info->error=0;
-  init_read_function(info,type);
-  init_write_function(info,type);
+  init_functions(info,type);
+
 #ifdef HAVE_AIOWAIT
-  if (type != READ_NET)
+  if (use_async_io && ! my_disable_async_io &&
+      ((ulong) info->buffer_length <
+       (ulong) (info->end_of_file - seek_offset)))
   {
-    if (use_async_io && ! my_disable_async_io &&
-	((ulong) info->buffer_length <
-	 (ulong) (info->end_of_file - seek_offset)))
-    {
-      info->read_length=info->buffer_length/2;
-      info->read_function=_my_b_async_read;
-    }
+    info->read_length=info->buffer_length/2;
+    info->read_function=_my_b_async_read;
   }
   info->inited=0;
 #endif
@@ -336,28 +335,30 @@ my_bool reinit_io_cache(IO_CACHE *info, enum cache_type type,
 
 
 
-	/*
-	  Read buffered. Returns 1 if can't read requested characters
-	  This function is only called from the my_b_read() macro
-	  when there isn't enough characters in the buffer to
-	  satisfy the request.
-	  Returns 0 we succeeded in reading all data
-	*/
+/*
+  Read buffered. Returns 1 if can't read requested characters
+  This function is only called from the my_b_read() macro
+  when there isn't enough characters in the buffer to
+  satisfy the request.
+  Returns 0 we succeeded in reading all data
+*/
 
 int _my_b_read(register IO_CACHE *info, byte *Buffer, uint Count)
 {
   uint length,diff_length,left_length;
   my_off_t max_length, pos_in_file;
-  
-  if ((left_length=(uint) (info->rc_end-info->rc_pos)))
+  DBUG_ENTER("_my_b_read");
+
+  if ((left_length=(uint) (info->read_end-info->read_pos)))
   {
-    dbug_assert(Count >= left_length);	/* User is not using my_b_read() */
-    memcpy(Buffer,info->rc_pos, (size_t) (left_length));
+    DBUG_ASSERT(Count >= left_length);	/* User is not using my_b_read() */
+    memcpy(Buffer,info->read_pos, (size_t) (left_length));
     Buffer+=left_length;
     Count-=left_length;
   }
+
   /* pos_in_file always point on where info->buffer was read */
-  pos_in_file=info->pos_in_file+(uint) (info->rc_end - info->buffer);
+  pos_in_file=info->pos_in_file+(uint) (info->read_end - info->buffer);
   if (info->seek_not_done)
   {					/* File touched, do seek */
     VOID(my_seek(info->file,pos_in_file,MY_SEEK_SET,MYF(0)));
@@ -370,7 +371,7 @@ int _my_b_read(register IO_CACHE *info, byte *Buffer, uint Count)
     if (info->end_of_file == pos_in_file)
     {					/* End of file */
       info->error=(int) left_length;
-      return 1;
+      DBUG_RETURN(1);
     }
     length=(Count & (uint) ~(IO_SIZE-1))-diff_length;
     if ((read_length=my_read(info->file,Buffer,(uint) length,info->myflags))
@@ -378,7 +379,7 @@ int _my_b_read(register IO_CACHE *info, byte *Buffer, uint Count)
     {
       info->error= read_length == (uint) -1 ? -1 :
 	(int) (read_length+left_length);
-      return 1;
+      DBUG_RETURN(1);
     }
     Count-=length;
     Buffer+=length;
@@ -386,16 +387,17 @@ int _my_b_read(register IO_CACHE *info, byte *Buffer, uint Count)
     left_length+=length;
     diff_length=0;
   }
+
   max_length=info->read_length-diff_length;
   if (info->type != READ_FIFO &&
-      (info->end_of_file - pos_in_file) < max_length)
+      max_length > (info->end_of_file - pos_in_file))
     max_length = info->end_of_file - pos_in_file;
   if (!max_length)
   {
     if (Count)
     {
       info->error= left_length;		/* We only got this many char */
-      return 1;
+      DBUG_RETURN(1);
     }
     length=0;				/* Didn't read any chars */
   }
@@ -406,20 +408,22 @@ int _my_b_read(register IO_CACHE *info, byte *Buffer, uint Count)
     if (length != (uint) -1)
       memcpy(Buffer,info->buffer,(size_t) length);
     info->error= length == (uint) -1 ? -1 : (int) (length+left_length);
-    return 1;
+    info->read_pos=info->read_end=info->buffer;
+    DBUG_RETURN(1);
   }
-  info->rc_pos=info->buffer+Count;
-  info->rc_end=info->buffer+length;
+  info->read_pos=info->buffer+Count;
+  info->read_end=info->buffer+length;
   info->pos_in_file=pos_in_file;
   memcpy(Buffer,info->buffer,(size_t) Count);
-  return 0;
+  DBUG_RETURN(0);
 }
 
-/* Do sequential read from the SEQ_READ_APPEND cache
-   we do this in three stages:
-    - first read from info->buffer
-    - then if there are still data to read, try the file descriptor
-    - afterwards, if there are still data to read, try append buffer
+/*
+  Do sequential read from the SEQ_READ_APPEND cache
+  we do this in three stages:
+   - first read from info->buffer
+   - then if there are still data to read, try the file descriptor
+   - afterwards, if there are still data to read, try append buffer
 */
 
 int _my_b_seq_read(register IO_CACHE *info, byte *Buffer, uint Count)
@@ -427,97 +431,127 @@ int _my_b_seq_read(register IO_CACHE *info, byte *Buffer, uint Count)
   uint length,diff_length,left_length,save_count;
   my_off_t max_length, pos_in_file;
   save_count=Count;
+
   /* first, read the regular buffer */
-  if ((left_length=(uint) (info->rc_end-info->rc_pos)))
+  if ((left_length=(uint) (info->read_end-info->read_pos)))
   {
-    dbug_assert(Count >= left_length);	/* User is not using my_b_read() */
-    memcpy(Buffer,info->rc_pos, (size_t) (left_length));
+    DBUG_ASSERT(Count > left_length);	/* User is not using my_b_read() */
+    memcpy(Buffer,info->read_pos, (size_t) (left_length));
     Buffer+=left_length;
     Count-=left_length;
   }
+  lock_append_buffer(info);
+
   /* pos_in_file always point on where info->buffer was read */
-  if ((pos_in_file=info->pos_in_file+(uint) (info->rc_end - info->buffer)) >=
+  if ((pos_in_file=info->pos_in_file+(uint) (info->read_end - info->buffer)) >=
       info->end_of_file)
-  {
-    info->pos_in_file=pos_in_file;
     goto read_append_buffer;
+
+  if (info->seek_not_done)
+  {					/* File touched, do seek */
+    VOID(my_seek(info->file,pos_in_file,MY_SEEK_SET,MYF(0)));
+    info->seek_not_done=0;
   }
-  /* no need to seek since the read is guaranteed to be sequential */
   diff_length=(uint) (pos_in_file & (IO_SIZE-1));
-  
+
   /* now the second stage begins - read from file descriptor */
   if (Count >= (uint) (IO_SIZE+(IO_SIZE-diff_length)))
   {					/* Fill first intern buffer */
     uint read_length;
-    if (info->end_of_file == pos_in_file)
-    {					/* End of file */
-      goto read_append_buffer;
-    }
+
     length=(Count & (uint) ~(IO_SIZE-1))-diff_length;
-    if ((read_length=my_read(info->file,Buffer,(uint) length,info->myflags))
-	!= (uint) length)
+    if ((read_length=my_read(info->file,Buffer,(uint) length,info->myflags)) ==
+	(uint)-1)
     {
-      if (read_length != (uint)-1)
-      {
-	Count -= read_length;
-	Buffer += read_length;
-      }
+      info->error= -1;
+      unlock_append_buffer(info);
+      return 1;
+    }
+    Count-=read_length;
+    Buffer+=read_length;
+    pos_in_file+=read_length;
+
+    if (read_length != (uint) length)
+    {
+      /*
+	We only got part of data;  Read the rest of the data from the
+	write buffer
+      */
       goto read_append_buffer;
     }
-    Count-=length;
-    Buffer+=length;
-    pos_in_file+=length;
     left_length+=length;
     diff_length=0;
   }
+
   max_length=info->read_length-diff_length;
-  if ((info->end_of_file - pos_in_file) < max_length)
+  if (max_length > (info->end_of_file - pos_in_file))
     max_length = info->end_of_file - pos_in_file;
   if (!max_length)
   {
     if (Count)
-    {
       goto read_append_buffer;
-    }
-    length=0;				/* Didn't read any chars */
+    length=0;				/* Didn't read any more chars */
   }
-  else if ((length=my_read(info->file,info->buffer,(uint) max_length,
-			   info->myflags)) < Count ||
-	   length == (uint) -1)
+  else
   {
-    if (length != (uint) -1)
+    length=my_read(info->file,info->buffer,(uint) max_length,
+		   info->myflags);
+    if (length == (uint) -1)
+    {
+      info->error= -1;
+      unlock_append_buffer(info);
+      return 1;
+    }
+    if (length < Count)
     {
       memcpy(Buffer,info->buffer,(size_t) length);
       Count -= length;
       Buffer += length;
+      goto read_append_buffer;
     }
-    goto read_append_buffer;
   }
-  info->rc_pos=info->buffer+Count;
-  info->rc_end=info->buffer+length;
+  unlock_append_buffer(info);
+  info->read_pos=info->buffer+Count;
+  info->read_end=info->buffer+length;
   info->pos_in_file=pos_in_file;
   memcpy(Buffer,info->buffer,(size_t) Count);
   return 0;
+
 read_append_buffer:
-  lock_append_buffer(info);
-  if (!Count) return 0;
+
+  /*
+     Read data from the current write buffer.
+     Count should never be == 0 here (The code will work even if count is 0)
+  */
+
   {
-    uint copy_len = (uint)(info->append_read_pos -
-			   info->write_pos);
-    dbug_assert(info->append_read_pos <= info->write_pos);
-    if (copy_len > Count)
-      copy_len = Count;
-    memcpy(Buffer, info->append_read_pos,
-	 copy_len);
+    /* First copy the data to Count */
+    uint len_in_buff = (uint) (info->write_pos - info->append_read_pos);
+    uint copy_len;
+
+    DBUG_ASSERT(info->append_read_pos <= info->write_pos);
+    DBUG_ASSERT(pos_in_file == info->end_of_file);
+
+    copy_len=min(Count, len_in_buff);
+    memcpy(Buffer, info->append_read_pos, copy_len);
     info->append_read_pos += copy_len;
     Count -= copy_len;
     if (Count)
-      info->error = save_count - Count; 
+      info->error = save_count - Count;
+
+    /* Fill read buffer with data from write buffer */
+    memcpy(info->buffer, info->append_read_pos,
+	   (size_t) (len_in_buff - copy_len));
+    info->read_pos= info->buffer;
+    info->read_end= info->buffer+(len_in_buff - copy_len);
+    info->append_read_pos=info->write_pos;
+    info->pos_in_file+=len_in_buff;
   }
   unlock_append_buffer(info);
   return Count ? 1 : 0;
 }
 
+
 #ifdef HAVE_AIOWAIT
 
 int _my_b_async_read(register IO_CACHE *info, byte *Buffer, uint Count)
@@ -527,8 +561,8 @@ int _my_b_async_read(register IO_CACHE *info, byte *Buffer, uint Count)
   my_off_t next_pos_in_file;
   byte *read_buffer;
 
-  memcpy(Buffer,info->rc_pos,
-	 (size_t) (left_length=(uint) (info->rc_end-info->rc_pos)));
+  memcpy(Buffer,info->read_pos,
+	 (size_t) (left_length=(uint) (info->read_end-info->read_pos)));
   Buffer+=left_length;
   org_Count=Count;
   Count-=left_length;
@@ -555,13 +589,13 @@ int _my_b_async_read(register IO_CACHE *info, byte *Buffer, uint Count)
 		    (int) (read_length+left_length));
       return(1);
     }
-    info->pos_in_file+=(uint) (info->rc_end - info->rc_request_pos);
+    info->pos_in_file+=(uint) (info->read_end - info->request_pos);
 
-    if (info->rc_request_pos != info->buffer)
-      info->rc_request_pos=info->buffer;
+    if (info->request_pos != info->buffer)
+      info->request_pos=info->buffer;
     else
-      info->rc_request_pos=info->buffer+info->read_length;
-    info->rc_pos=info->rc_request_pos;
+      info->request_pos=info->buffer+info->read_length;
+    info->read_pos=info->request_pos;
     next_pos_in_file=info->aio_read_pos+read_length;
 
 	/* Check if pos_in_file is changed
@@ -578,8 +612,8 @@ int _my_b_async_read(register IO_CACHE *info, byte *Buffer, uint Count)
       {
 	my_off_t offset= (info->pos_in_file - info->aio_read_pos);
 	info->pos_in_file=info->aio_read_pos; /* Whe are here */
-	info->rc_pos=info->rc_request_pos+offset;
-	read_length-=offset;			/* Bytes left from rc_pos */
+	info->read_pos=info->request_pos+offset;
+	read_length-=offset;			/* Bytes left from read_pos */
       }
     }
 #ifndef DBUG_OFF
@@ -591,16 +625,16 @@ int _my_b_async_read(register IO_CACHE *info, byte *Buffer, uint Count)
 #endif
 	/* Copy found bytes to buffer */
     length=min(Count,read_length);
-    memcpy(Buffer,info->rc_pos,(size_t) length);
+    memcpy(Buffer,info->read_pos,(size_t) length);
     Buffer+=length;
     Count-=length;
     left_length+=length;
-    info->rc_end=info->rc_pos+read_length;
-    info->rc_pos+=length;
+    info->read_end=info->rc_pos+read_length;
+    info->read_pos+=length;
   }
   else
     next_pos_in_file=(info->pos_in_file+ (uint)
-		      (info->rc_end - info->rc_request_pos));
+		      (info->read_end - info->request_pos));
 
 	/* If reading large blocks, or first read or read with skipp */
   if (Count)
@@ -614,13 +648,13 @@ int _my_b_async_read(register IO_CACHE *info, byte *Buffer, uint Count)
     read_length=IO_SIZE*2- (uint) (next_pos_in_file & (IO_SIZE-1));
     if (Count < read_length)
     {					/* Small block, read to cache */
-      if ((read_length=my_read(info->file,info->rc_request_pos,
+      if ((read_length=my_read(info->file,info->request_pos,
 			       read_length, info->myflags)) == (uint) -1)
 	return info->error= -1;
       use_length=min(Count,read_length);
-      memcpy(Buffer,info->rc_request_pos,(size_t) use_length);
-      info->rc_pos=info->rc_request_pos+Count;
-      info->rc_end=info->rc_request_pos+read_length;
+      memcpy(Buffer,info->request_pos,(size_t) use_length);
+      info->read_pos=info->request_pos+Count;
+      info->read_end=info->request_pos+read_length;
       info->pos_in_file=next_pos_in_file;	/* Start of block in cache */
       next_pos_in_file+=read_length;
 
@@ -641,7 +675,7 @@ int _my_b_async_read(register IO_CACHE *info, byte *Buffer, uint Count)
 	info->error= read_length == (uint)  -1 ? -1 : read_length+left_length;
 	return 1;
       }
-      info->rc_pos=info->rc_end=info->rc_request_pos;
+      info->read_pos=info->read_end=info->request_pos;
       info->pos_in_file=(next_pos_in_file+=Count);
     }
   }
@@ -652,7 +686,7 @@ int _my_b_async_read(register IO_CACHE *info, byte *Buffer, uint Count)
 
   if (max_length > (my_off_t) info->read_length - diff_length)
     max_length= (my_off_t) info->read_length - diff_length;
-  if (info->rc_request_pos != info->buffer)
+  if (info->request_pos != info->buffer)
     read_buffer=info->buffer;
   else
     read_buffer=info->buffer+info->read_length;
@@ -669,13 +703,13 @@ int _my_b_async_read(register IO_CACHE *info, byte *Buffer, uint Count)
       my_errno=errno;
       DBUG_PRINT("error",("got error: %d, aio_result: %d from aioread, async skipped",
 			  errno, info->aio_result.result.aio_errno));
-      if (info->rc_request_pos != info->buffer)
+      if (info->request_pos != info->buffer)
       {
-	bmove(info->buffer,info->rc_request_pos,
-	      (uint) (info->rc_end - info->rc_pos));
-	info->rc_request_pos=info->buffer;
-	info->rc_pos-=info->read_length;
-	info->rc_end-=info->read_length;
+	bmove(info->buffer,info->request_pos,
+	      (uint) (info->read_end - info->read_pos));
+	info->request_pos=info->buffer;
+	info->read_pos-=info->read_length;
+	info->read_end-=info->read_length;
       }
       info->read_length=info->buffer_length;	/* Use hole buffer */
       info->read_function=_my_b_read;		/* Use normal IO_READ next */
@@ -709,16 +743,17 @@ int _my_b_write(register IO_CACHE *info, const byte *Buffer, uint Count)
 {
   uint rest_length,length;
 
+  if (info->pos_in_file+info->buffer_length > info->end_of_file)
+  {
+    my_errno=errno=EFBIG;
+    return info->error = -1;
+  }
+
   rest_length=(uint) (info->write_end - info->write_pos);
   memcpy(info->write_pos,Buffer,(size_t) rest_length);
   Buffer+=rest_length;
   Count-=rest_length;
   info->write_pos+=rest_length;
-  if (info->pos_in_file+info->buffer_length > info->end_of_file)
-  {
-    my_errno=errno=EFBIG;
-    return info->error = -1;
-  }    
   if (flush_io_cache(info))
     return 1;
   if (Count >= IO_SIZE)
@@ -740,12 +775,21 @@ int _my_b_write(register IO_CACHE *info, const byte *Buffer, uint Count)
   return 0;
 }
 
-int _my_b_append(register IO_CACHE *info, const byte *Buffer, uint Count)
+
+/*
+  Append a block to the write buffer.
+  This is done with the buffer locked to ensure that we don't read from
+  the write buffer before we are ready with it.
+*/
+
+int my_b_append(register IO_CACHE *info, const byte *Buffer, uint Count)
 {
   uint rest_length,length;
 
-  rest_length=(uint) (info->append_end -
-		      info->write_pos);
+  lock_append_buffer(info);
+  rest_length=(uint) (info->write_end - info->write_pos);
+  if (Count <= rest_length)
+    goto end;
   memcpy(info->write_pos,Buffer,(size_t) rest_length);
   Buffer+=rest_length;
   Count-=rest_length;
@@ -760,8 +804,11 @@ int _my_b_append(register IO_CACHE *info, const byte *Buffer, uint Count)
     Count-=length;
     Buffer+=length;
   }
+
+end:
   memcpy(info->write_pos,Buffer,(size_t) Count);
   info->write_pos+=Count;
+  unlock_append_buffer(info);
   return 0;
 }
 
@@ -791,10 +838,13 @@ int my_block_write(register IO_CACHE *info, const byte *Buffer, uint Count,
     Buffer+=length;
     pos+=  length;
     Count-= length;
+#ifndef HAVE_PREAD
+    info->seek_not_done=1;
+#endif
   }
 
   /* Check if we want to write inside the used part of the buffer.*/
-  length= (uint) (info->rc_end - info->buffer);
+  length= (uint) (info->write_end - info->buffer);
   if (pos < info->pos_in_file + length)
   {
     uint offset= (uint) (pos - info->pos_in_file);
@@ -816,20 +866,16 @@ int my_block_write(register IO_CACHE *info, const byte *Buffer, uint Count,
   return error;
 }
 
-/* avoid warning about empty if body */
-#ifdef THREAD
-#define IF_APPEND_CACHE if (append_cache)
-#else
-#define IF_APPEND_CACHE
-#endif
 
 	/* Flush write cache */
 
 int flush_io_cache(IO_CACHE *info)
 {
   uint length;
-  int append_cache;
+  my_bool append_cache;
+  my_off_t pos_in_file;
   DBUG_ENTER("flush_io_cache");
+
   append_cache = (info->type == SEQ_READ_APPEND);
   if (info->type == WRITE_CACHE || append_cache)
   {
@@ -838,44 +884,45 @@ int flush_io_cache(IO_CACHE *info)
       if (real_open_cached_file(info))
 	DBUG_RETURN((info->error= -1));
     }
-    IF_APPEND_CACHE
-      lock_append_buffer(info);
-    if (info->write_pos != info->buffer)
+    if ((length=(uint) (info->write_pos - info->write_buffer)))
     {
-      length=(uint) (info->write_pos - info->buffer);
+      pos_in_file=info->pos_in_file;
+      if (append_cache)
+      {
+	pos_in_file=info->end_of_file;
+	info->seek_not_done=1;
+      }
       if (info->seek_not_done)
       {					/* File touched, do seek */
-	if (my_seek(info->file,info->pos_in_file,MY_SEEK_SET,MYF(0)) ==
+	if (my_seek(info->file,pos_in_file,MY_SEEK_SET,MYF(0)) ==
 	    MY_FILEPOS_ERROR)
 	{
-	  IF_APPEND_CACHE
-	    unlock_append_buffer(info);
 	  DBUG_RETURN((info->error= -1));
 	}
-	info->seek_not_done=0;
-      }
-      info->write_pos=info->buffer;
-      info->pos_in_file+=length;
-      info->write_end=(info->buffer+info->buffer_length-
-		    (info->pos_in_file & (IO_SIZE-1)));
-      if (append_cache)
-      {
-	info->append_read_pos = info->buffer;
-	info->append_end = info->write_end;
+	if (!append_cache)
+	  info->seek_not_done=0;
       }
-      if (my_write(info->file,info->buffer,length,info->myflags | MY_NABP))
-        info->error= -1;
+      info->write_pos= info->write_buffer;
+      if (!append_cache)
+	info->pos_in_file+=length;
+      info->write_end= (info->write_buffer+info->buffer_length-
+			((pos_in_file+length) & (IO_SIZE-1)));
+
+      /* Set this to be used if we are using SEQ_READ_APPEND */
+      info->append_read_pos = info->write_buffer;
+      if (my_write(info->file,info->write_buffer,length,
+		   info->myflags | MY_NABP))
+	info->error= -1;
       else
 	info->error= 0;
-      IF_APPEND_CACHE
-        unlock_append_buffer(info);
+      set_if_bigger(info->end_of_file,(pos_in_file+length));
       DBUG_RETURN(info->error);
     }
   }
 #ifdef HAVE_AIOWAIT
   else if (info->type != READ_NET)
   {
-    my_aiowait(&info->aio_result);	/* Wait for outstanding req */
+    my_aiowait(&info->aio_result);		/* Wait for outstanding req */
     info->inited=0;
   }
 #endif
@@ -888,7 +935,8 @@ int end_io_cache(IO_CACHE *info)
   int error=0;
   IO_CACHE_CALLBACK pre_close;
   DBUG_ENTER("end_io_cache");
-  if((pre_close=info->pre_close))
+
+  if ((pre_close=info->pre_close))
     (*pre_close)(info);
   if (info->alloced_buffer)
   {
@@ -896,13 +944,28 @@ int end_io_cache(IO_CACHE *info)
     if (info->file != -1)			/* File doesn't exist */
       error=flush_io_cache(info);
     my_free((gptr) info->buffer,MYF(MY_WME));
-    info->buffer=info->rc_pos=(byte*) 0;
-    info->alloced_buffer = 0;
+    info->buffer=info->read_pos=(byte*) 0;
+  }
+  if (info->type == SEQ_READ_APPEND)
+  {
+    /* Destroy allocated mutex */
+    info->type=0;
+#ifdef THREAD
+    pthread_mutex_destroy(&info->append_buffer_lock);
+#endif
   }
   DBUG_RETURN(error);
 } /* end_io_cache */
 
+
+/**********************************************************************
+ Testing of MF_IOCACHE
+**********************************************************************/
+
 #ifdef MAIN
+
+#include <my_dir.h>
+
 void die(const char* fmt, ...)
 {
   va_list va_args;
@@ -916,7 +979,7 @@ void die(const char* fmt, ...)
 int open_file(const char* fname, IO_CACHE* info, int cache_size)
 {
   int fd;
-  if ((fd=my_open(fname,O_CREAT|O_APPEND|O_RDWR,MYF(MY_WME))) < 0)
+  if ((fd=my_open(fname,O_CREAT | O_RDWR,MYF(MY_WME))) < 0)
     die("Could not open %s", fname);
   if (init_io_cache(info, fd, cache_size, SEQ_READ_APPEND, 0,0,MYF(MY_WME)))
     die("failed in init_io_cache()");
@@ -960,8 +1023,8 @@ int main(int argc, char** argv)
     char buf[4];
     int block_size = abs(rand() % max_block);
     int4store(buf, block_size);
-    if (my_b_write(&sra_cache,buf,4) ||
-	my_b_write(&sra_cache, block, block_size))
+    if (my_b_append(&sra_cache,buf,4) ||
+	my_b_append(&sra_cache, block, block_size))
       die("write failed");
     total_bytes += 4+block_size;
   }
@@ -985,6 +1048,3 @@ supposedly written\n");
   return 0;
 }
 #endif
-
-
-
diff --git a/mysys/mf_iocache2.c b/mysys/mf_iocache2.c
index 4e8f3e19ad9..d85215a2f4b 100644
--- a/mysys/mf_iocache2.c
+++ b/mysys/mf_iocache2.c
@@ -26,22 +26,42 @@
 #include <m_ctype.h>
 
 /*
-** Fix that next read will be made at certain position
-** For write cache, make next write happen at a certain position
+  Fix that next read will be made at certain position
+  For write cache, make next write happen at a certain position
 */
 
 void my_b_seek(IO_CACHE *info,my_off_t pos)
 {
+  DBUG_ENTER("my_b_seek");
+  DBUG_PRINT("enter",("pos: %lu", (ulong) pos));
+
   if (info->type == READ_CACHE)
   {
-    info->rc_pos=info->rc_end=info->buffer;
+    byte* try_pos=info->read_pos + (pos - info->pos_in_file);
+    if (try_pos >= info->buffer &&
+	try_pos <= info->read_end)
+    {
+      /* The position is in the current buffer; Reuse it */
+      info->read_pos = try_pos;
+      DBUG_VOID_RETURN;
+    }
+    else
+    {
+      /* Force a new read on next my_b_read */
+      info->read_pos=info->read_end=info->buffer;
+    }
   }
   else if (info->type == WRITE_CACHE)
   {
-    byte* try_write_pos;
-    try_write_pos = info->write_pos + (pos - info->pos_in_file);
-    if (try_write_pos >= info->buffer && try_write_pos <= info->write_end)
-      info->write_pos = try_write_pos;
+    byte* try_pos;
+    /* If write is in current buffer, reuse it */
+    try_pos = info->write_pos + (pos - info->pos_in_file);
+    if (try_pos >= info->write_buffer &&
+	try_pos <= info->write_end)
+    {
+      info->write_pos = try_pos;
+      DBUG_VOID_RETURN;
+    }
     else
       flush_io_cache(info);
   }
@@ -51,14 +71,15 @@ void my_b_seek(IO_CACHE *info,my_off_t pos)
 
 /*
 **  Fill buffer.  Note that this assumes that you have already used
-**  all characters in the CACHE, independent of the rc_pos value!
+**  all characters in the CACHE, independent of the read_pos value!
 **  return:  0 on error or EOF (info->error = -1 on error)
 **           number of characters
 */
 
 uint my_b_fill(IO_CACHE *info)
 {
-  my_off_t pos_in_file=info->pos_in_file+(uint) (info->rc_end - info->buffer);
+  my_off_t pos_in_file=(info->pos_in_file+
+			(uint) (info->read_end - info->buffer));
   my_off_t max_length;
   uint diff_length,length;
   if (info->seek_not_done)
@@ -86,8 +107,8 @@ uint my_b_fill(IO_CACHE *info)
     info->error= -1;
     return 0;
   }
-  info->rc_pos=info->buffer;
-  info->rc_end=info->buffer+length;
+  info->read_pos=info->buffer;
+  info->read_end=info->buffer+length;
   info->pos_in_file=pos_in_file;
   return length;
 }
@@ -113,11 +134,11 @@ uint my_b_gets(IO_CACHE *info, char *to, uint max_length)
     char *pos,*end;
     if (length > max_length)
       length=max_length;
-    for (pos=info->rc_pos,end=pos+length ; pos < end ;)
+    for (pos=info->read_pos,end=pos+length ; pos < end ;)
     {
       if ((*to++ = *pos++) == '\n')
       {
-	info->rc_pos=pos;
+	info->read_pos=pos;
 	*to='\0';
 	return (uint) (to-start);
       }
@@ -125,7 +146,7 @@ uint my_b_gets(IO_CACHE *info, char *to, uint max_length)
     if (!(max_length-=length))
     {
      /* Found enough charcters;  Return found string */
-      info->rc_pos=pos;
+      info->read_pos=pos;
       *to='\0';
       return (uint) (to-start);
     }
diff --git a/mysys/my_alloc.c b/mysys/my_alloc.c
index 3b9c765a5ae..93e624714b0 100644
--- a/mysys/my_alloc.c
+++ b/mysys/my_alloc.c
@@ -20,9 +20,11 @@
 #include <my_global.h>
 #include <my_sys.h>
 #include <m_string.h>
+#undef EXTRA_DEBUG
 #define EXTRA_DEBUG
 
-void init_alloc_root(MEM_ROOT *mem_root, uint block_size, uint pre_alloc_size)
+void init_alloc_root(MEM_ROOT *mem_root, uint block_size,
+		     uint pre_alloc_size __attribute__((unused)))
 {
   mem_root->free=mem_root->used=0;
   mem_root->min_malloc=32;
diff --git a/mysys/my_bitmap.c b/mysys/my_bitmap.c
index f30298922df..5676c786c96 100644
--- a/mysys/my_bitmap.c
+++ b/mysys/my_bitmap.c
@@ -32,7 +32,7 @@ my_bool bitmap_init(MY_BITMAP *map, uint bitmap_size)
   if (!(map->bitmap=(uchar*) my_malloc((bitmap_size+7)/8,
 				       MYF(MY_WME | MY_ZEROFILL))))
     return 1;
-  dbug_assert(bitmap_size != ~(uint) 0);
+  DBUG_ASSERT(bitmap_size != ~(uint) 0);
 #ifdef THREAD
   pthread_mutex_init(&map->mutex, MY_MUTEX_INIT_FAST);
 #endif
diff --git a/mysys/my_pthread.c b/mysys/my_pthread.c
index 8bdbc0f7fd8..d946006b4b4 100644
--- a/mysys/my_pthread.c
+++ b/mysys/my_pthread.c
@@ -424,7 +424,7 @@ struct hostent *my_gethostbyname_r(const char *name,
 				   int buflen, int *h_errnop)
 {
   struct hostent *hp;
-  dbug_assert((size_t) buflen >= sizeof(*result));
+  DBUG_ASSERT((size_t) buflen >= sizeof(*result));
   if (gethostbyname_r(name,result, buffer, (size_t) buflen, &hp, h_errnop))
     return 0;
   return hp;
@@ -436,7 +436,7 @@ struct hostent *my_gethostbyname_r(const char *name,
 				   struct hostent *result, char *buffer,
 				   int buflen, int *h_errnop)
 {
-  dbug_assert(buflen >= sizeof(struct hostent_data));
+  DBUG_ASSERT(buflen >= sizeof(struct hostent_data));
   if (gethostbyname_r(name,result,(struct hostent_data *) buffer) == -1)
   {
     *h_errnop= errno;
@@ -452,7 +452,7 @@ struct hostent *my_gethostbyname_r(const char *name,
 				   int buflen, int *h_errnop)
 {
   struct hostent *hp;
-  dbug_assert(buflen >= sizeof(struct hostent_data));
+  DBUG_ASSERT(buflen >= sizeof(struct hostent_data));
   hp= gethostbyname_r(name,result,(struct hostent_data *) buffer);
   *h_errnop= errno;
   return hp;
diff --git a/mysys/my_seek.c b/mysys/my_seek.c
index 7c4da4f6010..87da4d93cb7 100644
--- a/mysys/my_seek.c
+++ b/mysys/my_seek.c
@@ -26,7 +26,8 @@ my_off_t my_seek(File fd, my_off_t pos, int whence,
   reg1 os_off_t newpos;
   DBUG_ENTER("my_seek");
   DBUG_PRINT("my",("Fd: %d  Hpos: %lu  Pos: %lu  Whence: %d  MyFlags: %d",
-		   fd, ((ulonglong) pos) >> 32, (ulong) pos, whence, MyFlags));
+		   fd, (ulong) (((ulonglong) pos) >> 32), (ulong) pos, 
+		   whence, MyFlags));
   newpos=lseek(fd, pos, whence);
   if (newpos == (os_off_t) -1)
   {
@@ -34,6 +35,10 @@ my_off_t my_seek(File fd, my_off_t pos, int whence,
     DBUG_PRINT("error",("lseek: %lu, errno: %d",newpos,errno));
     DBUG_RETURN(MY_FILEPOS_ERROR);
   }
+  if (newpos != pos)
+  {
+    DBUG_PRINT("exit",("pos: %lu", (ulong) newpos));
+  }
   DBUG_RETURN((my_off_t) newpos);
 } /* my_seek */
 
@@ -53,6 +58,6 @@ my_off_t my_tell(File fd, myf MyFlags __attribute__((unused)))
 #endif
   if (pos == (os_off_t) -1)
     my_errno=errno;
-  DBUG_PRINT("exit",("pos: %lu",pos));
+  DBUG_PRINT("exit",("pos: %lu", (ulong) pos));
   DBUG_RETURN((my_off_t) pos);
 } /* my_tell */
diff --git a/sql/ha_berkeley.cc b/sql/ha_berkeley.cc
index c11b1bbd4f8..3cb14b5e72f 100644
--- a/sql/ha_berkeley.cc
+++ b/sql/ha_berkeley.cc
@@ -1045,7 +1045,7 @@ int ha_berkeley::restore_keys(DB_TXN *trans, key_map changed_keys,
   }
   
 err:
-  dbug_assert(error != DB_KEYEXIST);
+  DBUG_ASSERT(error != DB_KEYEXIST);
   DBUG_RETURN(error);
 }
 
@@ -1187,7 +1187,7 @@ int ha_berkeley::remove_key(DB_TXN *trans, uint keynr, const byte *record,
 	   ((table->key_info[keynr].flags & (HA_NOSAME | HA_NULL_PART_KEY)) ==
 	    HA_NOSAME))
   {						// Unique key
-    dbug_assert(keynr == primary_key || prim_key->data != key_buff2);
+    DBUG_ASSERT(keynr == primary_key || prim_key->data != key_buff2);
     error=key_file[keynr]->del(key_file[keynr], trans,
 			       keynr == primary_key ?
 			       prim_key :
@@ -1201,7 +1201,7 @@ int ha_berkeley::remove_key(DB_TXN *trans, uint keynr, const byte *record,
       row to find the key to be delete and delete it.
       We will never come here with keynr = primary_key
     */
-    dbug_assert(keynr != primary_key && prim_key->data != key_buff2);
+    DBUG_ASSERT(keynr != primary_key && prim_key->data != key_buff2);
     DBC *tmp_cursor;
     if (!(error=key_file[keynr]->cursor(key_file[keynr], trans,
 					&tmp_cursor, 0)))
diff --git a/sql/ha_innobase.cc b/sql/ha_innobase.cc
index 8c92e0635a5..b96eb86dbc1 100644
--- a/sql/ha_innobase.cc
+++ b/sql/ha_innobase.cc
@@ -196,7 +196,7 @@ convert_error_code_to_mysql(
 
     		return(HA_ERR_TO_BIG_ROW);
     	} else {
-    		dbug_assert(0);
+    		DBUG_ASSERT(0);
 
     		return(-1);			// Unknown error
     	}
@@ -259,7 +259,7 @@ check_trx_exists(
 	trx = (trx_t*) thd->transaction.all.innobase_tid;
 
 	if (trx == NULL) {
-	        dbug_assert(thd != NULL);
+	        DBUG_ASSERT(thd != NULL);
 		trx = trx_allocate_for_mysql();
 
 		trx->mysql_thd = thd;
@@ -852,7 +852,7 @@ normalize_table_name(
 
 	name_ptr = ptr + 1;
 
-	dbug_assert(ptr > name);
+	DBUG_ASSERT(ptr > name);
 
 	ptr--;
 
@@ -975,7 +975,7 @@ ha_innobase::open(
 
   		ref_length = DATA_ROW_ID_LEN + 10;
 				
-		dbug_assert(key_used_on_scan == MAX_KEY);
+		DBUG_ASSERT(key_used_on_scan == MAX_KEY);
 	}
 
 	auto_inc_counter_for_this_stat = 0;
@@ -1119,8 +1119,8 @@ innobase_mysql_cmp(
 	enum_field_types	mysql_tp;
 	int                     ret;
 
-	dbug_assert(a_length != UNIV_SQL_NULL);
-	dbug_assert(b_length != UNIV_SQL_NULL);
+	DBUG_ASSERT(a_length != UNIV_SQL_NULL);
+	DBUG_ASSERT(b_length != UNIV_SQL_NULL);
 
 	mysql_tp = (enum_field_types) mysql_type;
 
@@ -1158,11 +1158,11 @@ get_innobase_type_from_mysql_type(
 	8 bits: this is used in ibuf and also when DATA_NOT_NULL is
 	ORed to the type */
 
-	dbug_assert((ulint)FIELD_TYPE_STRING < 256);
-	dbug_assert((ulint)FIELD_TYPE_VAR_STRING < 256);
-	dbug_assert((ulint)FIELD_TYPE_DOUBLE < 256);
-	dbug_assert((ulint)FIELD_TYPE_FLOAT < 256);
-	dbug_assert((ulint)FIELD_TYPE_DECIMAL < 256);
+	DBUG_ASSERT((ulint)FIELD_TYPE_STRING < 256);
+	DBUG_ASSERT((ulint)FIELD_TYPE_VAR_STRING < 256);
+	DBUG_ASSERT((ulint)FIELD_TYPE_DOUBLE < 256);
+	DBUG_ASSERT((ulint)FIELD_TYPE_FLOAT < 256);
+	DBUG_ASSERT((ulint)FIELD_TYPE_DECIMAL < 256);
 
 	switch (field->type()) {
 		case FIELD_TYPE_VAR_STRING: if (field->flags & BINARY_FLAG) {
@@ -2368,7 +2368,7 @@ ha_innobase::position(
 		len = store_key_val_for_row(primary_key, (char*) ref, record);
 	}
 
-	dbug_assert(len <= ref_length);
+	DBUG_ASSERT(len <= ref_length);
 
 	ref_stored_len = len;
 }
diff --git a/sql/log.cc b/sql/log.cc
index 916e7d20d32..fa45d938b24 100644
--- a/sql/log.cc
+++ b/sql/log.cc
@@ -774,13 +774,13 @@ bool MYSQL_LOG::write(IO_CACHE *cache)
     length=my_b_bytes_in_cache(cache);
     do
     {
-      if (my_b_write(&log_file, cache->rc_pos, length))
+      if (my_b_write(&log_file, cache->read_pos, length))
       {
 	if (!write_error)
 	  sql_print_error(ER(ER_ERROR_ON_WRITE), name, errno);
 	goto err;
       }
-      cache->rc_pos=cache->rc_end;		// Mark buffer used up
+      cache->read_pos=cache->read_end;		// Mark buffer used up
     } while ((length=my_b_fill(cache)));
     if (flush_io_cache(&log_file))
     {
diff --git a/sql/mf_iocache.cc b/sql/mf_iocache.cc
index 55e953687a3..2a7b25eab2f 100644
--- a/sql/mf_iocache.cc
+++ b/sql/mf_iocache.cc
@@ -52,26 +52,32 @@ int _my_b_net_read(register IO_CACHE *info, byte *Buffer,
 {
   int read_length;
   NET *net= &(current_thd)->net;
+  DBUG_ENTER("_my_b_net_read");
 
-  if (info->end_of_file)
-    return 1;		/* because my_b_get (no _) takes 1 byte at a time */
+  if (!info->end_of_file)
+    DBUG_RETURN(1);	/* because my_b_get (no _) takes 1 byte at a time */
   read_length=my_net_read(net);
   if (read_length == (int) packet_error)
   {
     info->error= -1;
-    return 1;
+    DBUG_RETURN(1);
   }
   if (read_length == 0)
   {
-    /* End of file from client */
-    info->end_of_file = 1; return 1;
+    info->end_of_file= 0;			/* End of file from client */
+    DBUG_RETURN(1);
   }
   /* to set up stuff for my_b_get (no _) */
-  info->rc_end = (info->rc_pos = (byte*) net->read_pos) + read_length;
-  Buffer[0] = info->rc_pos[0];			/* length is always 1 */
-  info->rc_pos++;
-  info->buffer = info->rc_pos;
-  return 0;
+  info->read_end = (info->read_pos = (byte*) net->read_pos) + read_length;
+  Buffer[0] = info->read_pos[0];		/* length is always 1 */
+  info->read_pos++;
+
+  /*
+    info->request_pos is used by log_loaded_block() to know the size
+    of the current block
+  */
+  info->request_pos=info->read_pos;
+  DBUG_RETURN(0);
 }
 
 } /* extern "C" */
diff --git a/sql/opt_range.cc b/sql/opt_range.cc
index 4c22dc5b6a2..4ac653e070c 100644
--- a/sql/opt_range.cc
+++ b/sql/opt_range.cc
@@ -2614,7 +2614,7 @@ int QUICK_SELECT_DESC::get_next()
     }
     else
     {
-      dbug_assert(range->flag & NEAR_MAX || range_reads_after_key(range));
+      DBUG_ASSERT(range->flag & NEAR_MAX || range_reads_after_key(range));
       /* Note: even if max_key is only a prefix, HA_READ_AFTER_KEY will
        * do the right thing - go past all keys which match the prefix */
       result=file->index_read(record, (byte*) range->max_key,
diff --git a/sql/sql_base.cc b/sql/sql_base.cc
index 2f8c44c6f0b..2c2c3f703b9 100644
--- a/sql/sql_base.cc
+++ b/sql/sql_base.cc
@@ -882,7 +882,7 @@ TABLE *open_table(THD *thd,const char *db,const char *table_name,
   table->outer_join=table->null_row=table->maybe_null=0;
   table->status=STATUS_NO_RECORD;
   table->keys_in_use_for_query=table->used_keys= table->keys_in_use;
-  dbug_assert(table->key_read == 0);
+  DBUG_ASSERT(table->key_read == 0);
   DBUG_RETURN(table);
 }
 
diff --git a/sql/sql_handler.cc b/sql/sql_handler.cc
index f40ebfe43ed..c7fb237ccf2 100644
--- a/sql/sql_handler.cc
+++ b/sql/sql_handler.cc
@@ -126,7 +126,7 @@ int mysql_ha_read(THD *thd, TABLE_LIST *tables,
          mode=RNEXT;
          break;
       case RLAST:
-         dbug_assert(keyname != 0);
+         DBUG_ASSERT(keyname != 0);
          err=table->file->index_last(table->record[0]);
          mode=RPREV;
          break;
@@ -136,12 +136,12 @@ int mysql_ha_read(THD *thd, TABLE_LIST *tables,
              table->file->rnd_next(table->record[0]);
          break;
       case RPREV:
-         dbug_assert(keyname != 0);
+         DBUG_ASSERT(keyname != 0);
          err=table->file->index_prev(table->record[0]);
          break;
       case RKEY:
         {
-          dbug_assert(keyname != 0);
+          DBUG_ASSERT(keyname != 0);
           KEY *keyinfo=table->key_info+keyno;
 	  KEY_PART_INFO *key_part=keyinfo->key_part;
           uint key_len;
diff --git a/sql/sql_load.cc b/sql/sql_load.cc
index 3d79ee6682f..17d1765495c 100644
--- a/sql/sql_load.cc
+++ b/sql/sql_load.cc
@@ -551,7 +551,7 @@ READ_INFO::READ_INFO(File file_par, uint tot_length, String &field_term,
       need_end_io_cache = 1;
       if (!opt_old_rpl_compat && mysql_bin_log.is_open())
 	cache.pre_read = cache.pre_close =
-	  (IO_CACHE_CALLBACK)log_loaded_block;
+	  (IO_CACHE_CALLBACK) log_loaded_block;
     }
   }
 }
diff --git a/sql/sql_parse.cc b/sql/sql_parse.cc
index 0eabd971027..96185a174b5 100644
--- a/sql/sql_parse.cc
+++ b/sql/sql_parse.cc
@@ -288,7 +288,7 @@ static void decrease_user_connections(const char *user, const char *host)
 
   uc = (struct  user_conn *) hash_search(&hash_user_connections,
 					 (byte*) temp_user, temp_len);
-  dbug_assert(uc != 0);			// We should always find the user
+  DBUG_ASSERT(uc != 0);			// We should always find the user
   if (!uc)
     goto end;				// Safety; Something went wrong
   if (! --uc->connections)
diff --git a/sql/sql_repl.cc b/sql/sql_repl.cc
index 431f2ef5d5e..6c738ba36b4 100644
--- a/sql/sql_repl.cc
+++ b/sql/sql_repl.cc
@@ -137,7 +137,7 @@ File open_binlog(IO_CACHE *log, const char *log_file_name,
 
   if ((file = my_open(log_file_name, O_RDONLY | O_BINARY, MYF(MY_WME))) < 0 ||
       init_io_cache(log, file, IO_SIZE*2, READ_CACHE, 0, 0,
-		    MYF(MY_WME)))
+		    MYF(MY_WME | MY_DONT_CHECK_FILESIZE)))
   {
     *errmsg = "Could not open log file";	// This will not be sent
     goto err;
@@ -1024,8 +1024,10 @@ int log_loaded_block(IO_CACHE* file)
 {
   LOAD_FILE_INFO* lf_info;
   uint block_len ;
-  char* buffer = (char*)file->buffer;
-  if (!(block_len = file->rc_end - buffer))
+
+  /* file->request_pos contains position where we started last read */
+  char* buffer = (char*) file->request_pos;
+  if (!(block_len = file->read_end - buffer))
     return 0;
   lf_info = (LOAD_FILE_INFO*)file->arg;
   if (lf_info->last_pos_in_file != HA_POS_ERROR &&
diff --git a/sql/sql_select.cc b/sql/sql_select.cc
index 131362167cb..b40c98cbb52 100644
--- a/sql/sql_select.cc
+++ b/sql/sql_select.cc
@@ -2680,7 +2680,7 @@ eq_ref_table(JOIN *join, ORDER *start_order, JOIN_TAB *tab)
       if (order)
       {
 	found++;
-	dbug_assert(!(order->used & map));
+	DBUG_ASSERT(!(order->used & map));
 	order->used|=map;
 	continue;				// Used in ORDER BY
       }
diff --git a/tools/mysqlmanager.c b/tools/mysqlmanager.c
index aa645b609d8..31df66d10c6 100644
--- a/tools/mysqlmanager.c
+++ b/tools/mysqlmanager.c
@@ -1687,7 +1687,7 @@ static void init_pid_file()
   if (!fp)
     die("Could not open pid file %s", pid_file);
   created_pid_file=1;
-  fprintf(fp, "%d\n", getpid());
+  fprintf(fp, "%d\n", (int) getpid());
   fclose(fp);
 }