Merge neptunus.(none):/home/msvensson/mysql/mysql-5.0

into  neptunus.(none):/home/msvensson/mysql/mysql-5.0-maint

19 files changed, 602 insertions, 127 deletions

diff --git a/mysql-test/t/func_gconcat.test b/mysql-test/t/func_gconcat.test
index 610c93dfb0f..3ff4b35873b 100644
--- a/mysql-test/t/func_gconcat.test
+++ b/mysql-test/t/func_gconcat.test
@@ -29,8 +29,10 @@ select grp,group_concat(c order by c) from t1 group by grp;
 select grp,group_concat(c order by c desc) from t1 group by grp;
 select grp,group_concat(d order by a) from t1 group by grp;
 select grp,group_concat(d order by a desc) from t1 group by grp;
+--disable_warnings
 select grp,group_concat(a order by a,d+c-ascii(c)-a) from t1 group by grp;
 select grp,group_concat(a order by d+c-ascii(c),a) from t1 group by grp;
+--enable_warnings
 select grp,group_concat(c order by 1) from t1 group by grp;
 select grp,group_concat(distinct c order by c) from t1 group by grp;
 select grp,group_concat(distinct c order by c desc) from t1 group by grp;
diff --git a/mysql-test/t/func_group.test b/mysql-test/t/func_group.test
index 089f5ed9911..bccd4d9e762 100644
--- a/mysql-test/t/func_group.test
+++ b/mysql-test/t/func_group.test
@@ -29,7 +29,9 @@ select count(distinct a),count(distinct grp) from t1;
 
 select sum(all a),count(all a),avg(all a),std(all a),variance(all a),bit_or(all a),bit_and(all a),min(all a),max(all a),min(all c),max(all c) from t1;
 select grp, sum(a),count(a),avg(a),std(a),variance(a),bit_or(a),bit_and(a),min(a),max(a),min(c),max(c) from t1 group by grp;
+--disable_warnings
 select grp, sum(a)+count(a)+avg(a)+std(a)+variance(a)+bit_or(a)+bit_and(a)+min(a)+max(a)+min(c)+max(c) as sum from t1 group by grp;
+--enable_warnings
 
 create table t2 (grp int, a bigint unsigned, c char(10));
 insert into t2 select grp,max(a)+max(grp),max(c) from t1 group by grp;
diff --git a/mysql-test/t/func_in.test b/mysql-test/t/func_in.test
index 8ddf1fbe314..d48606ac6e6 100644
--- a/mysql-test/t/func_in.test
+++ b/mysql-test/t/func_in.test
@@ -109,7 +109,28 @@ select count(*) from t1 where id not in (1);
 select count(*) from t1 where id not in (1,2);
 drop table t1;
 
-# End of 4.1 tests
+
+#
+# BUG#17047: CHAR() and IN() can return NULL without signaling NULL
+# result
+#
+# The problem was in the IN() function that ignored maybe_null flags
+# of all arguments except the first (the one _before_ the IN
+# keyword, '1' in the test case below).
+#
+--disable_warnings
+DROP TABLE IF EXISTS t1;
+--enable_warnings
+
+CREATE TABLE t1 SELECT 1 IN (2, NULL);
+--echo SELECT should return NULL.
+SELECT * FROM t1;
+
+DROP TABLE t1;
+
+
+--echo End of 4.1 tests
+
 
 #
 # Bug #11885: WHERE condition with NOT IN (one element)          
@@ -232,3 +253,6 @@ select some_id from t1 where some_id not in(2,-1);
 select some_id from t1 where some_id not in(-4,-1,-4);
 select some_id from t1 where some_id not in(-4,-1,3423534,2342342);
 drop table t1;
+
+
+--echo End of 5.0 tests
diff --git a/mysql-test/t/func_str.test b/mysql-test/t/func_str.test
index 94190ff519f..af4f8b9a9d2 100644
--- a/mysql-test/t/func_str.test
+++ b/mysql-test/t/func_str.test
@@ -788,6 +788,7 @@ SELECT * FROM t1 INNER JOIN t2 ON code=id
 
 DROP TABLE t1,t2;
 
+
 #
 # Bug #10963
 # 4294967296 18446744073709551616
@@ -977,4 +978,18 @@ select lpad('hello', 18446744073709551616, '1');
 select lpad('hello', -18446744073709551617, '1');
 select lpad('hello', 18446744073709551617, '1');
 
+
+#
+# BUG#17047: CHAR() and IN() can return NULL without signaling NULL
+# result
+#
+SET @orig_sql_mode = @@SQL_MODE;
+SET SQL_MODE=traditional;
+
+SELECT CHAR(0xff,0x8f USING utf8);
+SELECT CHAR(0xff,0x8f USING utf8) IS NULL;
+
+SET SQL_MODE=@orig_sql_mode;
+
+
 --echo End of 5.0 tests
diff --git a/mysql-test/t/group_min_max.test b/mysql-test/t/group_min_max.test
index 8f88c98caa7..b3049498f90 100644
--- a/mysql-test/t/group_min_max.test
+++ b/mysql-test/t/group_min_max.test
@@ -810,3 +810,63 @@ explain SELECT MIN(c) FROM t2 WHERE b = 2 and a = 1 and c > 1 GROUP BY a;
 SELECT MIN(c) FROM t2 WHERE b = 2 and a = 1 and c > 1 GROUP BY a;
 
 DROP TABLE t1,t2;
+
+#
+# Bug#24156: Loose index scan not used with CREATE TABLE ...SELECT and similar statements
+#
+
+CREATE TABLE t1 (a INT, b INT, INDEX (a,b));
+INSERT INTO t1 (a, b) VALUES (1,1), (1,2), (1,3), (1,4), (1,5),
+       (2,2), (2,3), (2,1), (3,1), (4,1), (4,2), (4,3), (4,4), (4,5), (4,6);
+EXPLAIN SELECT max(b), a FROM t1 GROUP BY a;
+FLUSH STATUS;
+SELECT max(b), a FROM t1 GROUP BY a;
+SHOW STATUS LIKE 'handler_read__e%';
+EXPLAIN SELECT max(b), a FROM t1 GROUP BY a;
+FLUSH STATUS;
+CREATE TABLE t2 SELECT max(b), a FROM t1 GROUP BY a;
+SHOW STATUS LIKE 'handler_read__e%';
+FLUSH STATUS;
+SELECT * FROM (SELECT max(b), a FROM t1 GROUP BY a) b;
+SHOW STATUS LIKE 'handler_read__e%';
+FLUSH STATUS;
+(SELECT max(b), a FROM t1 GROUP BY a) UNION 
+ (SELECT max(b), a FROM t1 GROUP BY a);
+SHOW STATUS LIKE 'handler_read__e%';
+EXPLAIN (SELECT max(b), a FROM t1 GROUP BY a) UNION 
+ (SELECT max(b), a FROM t1 GROUP BY a);
+
+EXPLAIN SELECT (SELECT max(b) FROM t1 GROUP BY a HAVING a < 2) x
+  FROM t1 AS t1_outer;
+EXPLAIN SELECT 1 FROM t1 AS t1_outer WHERE EXISTS 
+  (SELECT max(b) FROM t1 GROUP BY a HAVING a < 2);
+EXPLAIN SELECT 1 FROM t1 AS t1_outer WHERE 
+  (SELECT max(b) FROM t1 GROUP BY a HAVING a < 2) > 12;
+EXPLAIN SELECT 1 FROM t1 AS t1_outer WHERE 
+  a IN (SELECT max(b) FROM t1 GROUP BY a HAVING a < 2);
+EXPLAIN SELECT 1 FROM t1 AS t1_outer GROUP BY a HAVING 
+  a > (SELECT max(b) FROM t1 GROUP BY a HAVING a < 2);
+EXPLAIN SELECT 1 FROM t1 AS t1_outer1 JOIN t1 AS t1_outer2 
+   ON t1_outer1.a = (SELECT max(b) FROM t1 GROUP BY a HAVING a < 2) 
+   AND t1_outer1.b = t1_outer2.b;
+EXPLAIN SELECT (SELECT (SELECT max(b) FROM t1 GROUP BY a HAVING a < 2) x
+  FROM t1 AS t1_outer) x2 FROM t1 AS t1_outer2;
+
+CREATE TABLE t3 LIKE t1;
+FLUSH STATUS;
+INSERT INTO t3 SELECT a,MAX(b) FROM t1 GROUP BY a;
+SHOW STATUS LIKE 'handler_read__e%';
+DELETE FROM t3;
+FLUSH STATUS;
+INSERT INTO t3 SELECT 1, (SELECT MAX(b) FROM t1 GROUP BY a HAVING a < 2) 
+  FROM t1 LIMIT 1;
+SHOW STATUS LIKE 'handler_read__e%';
+FLUSH STATUS;
+DELETE FROM t3 WHERE (SELECT MAX(b) FROM t1 GROUP BY a HAVING a < 2) > 10000;
+SHOW STATUS LIKE 'handler_read__e%';
+FLUSH STATUS;
+DELETE FROM t3 WHERE (SELECT (SELECT MAX(b) FROM t1 GROUP BY a HAVING a < 2) x 
+                      FROM t1) > 10000;
+SHOW STATUS LIKE 'handler_read__e%';
+
+DROP TABLE t1,t2,t3;
diff --git a/mysql-test/t/im_daemon_life_cycle.imtest b/mysql-test/t/im_daemon_life_cycle.imtest
index 65db9dee93f..acd615809f3 100644
--- a/mysql-test/t/im_daemon_life_cycle.imtest
+++ b/mysql-test/t/im_daemon_life_cycle.imtest
@@ -6,59 +6,73 @@
 #
 ###########################################################################
 
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle im_daemon_life_cycle.imtest started.
+
+###########################################################################
+
 --source include/im_check_env.inc
 
-# Turn on reconnect, not on by default anymore
+# Turn on reconnect, not on by default anymore.
 --enable_reconnect
 
 ###########################################################################
+#
+# The main daemon-life-cycle test case -- check that IM-angel will restart
+# IM-main if it got killed:
+#   - kill IM-main and check that IM-angel will restart it;
+#   - wait for IM-main to start accepting connections before continue test
+#     case;
+#
+###########################################################################
 
-# Kill the IM main process and check that the IM Angel will restart the main
-# process.
-
---exec $MYSQL_TEST_DIR/t/kill_n_check.sh $IM_PATH_PID restarted 30
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle Main-test: starting...
 
-###########################################################################
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle Killing IM-main...
+--exec $MYSQL_TEST_DIR/t/kill_n_check.sh $IM_PATH_PID restarted 30 im_daemon_life_cycle
 
-# Wait for IM to start accepting connections.
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle Waiting for IM-main to start accepting connections...
+--exec $MYSQL_TEST_DIR/t/wait_for_socket.sh $EXE_MYSQL $IM_PATH_SOCK $IM_USERNAME $IM_PASSWORD '' 30 im_daemon_life_cycle
 
---exec $MYSQL_TEST_DIR/t/wait_for_socket.sh $EXE_MYSQL $IM_PATH_SOCK $IM_USERNAME $IM_PASSWORD '' 30
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle Main-test: done.
 
 ###########################################################################
-
 #
 # BUG#12751: Instance Manager: client hangs
+#   - start nonguarded instance (mysqld2);
+#   - kill IM-main and get it restarted by IM-angel;
+#   - check that guarded instance (mysqld1) is accepting connections.
+#   - check that non-guarded instance (mysqld2) were not stopped.
 #
+###########################################################################
 
 --echo
 --echo --------------------------------------------------------------------
 --echo -- Test for BUG#12751
 --echo --------------------------------------------------------------------
 
-# Give some time to begin accepting connections after restart.
-# FIXME: race condition here.
-
---sleep 3
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle BUG12751: starting...
 
 # 1. Start mysqld;
 
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle mysqld2: starting...
 START INSTANCE mysqld2;
-# FIXME: START INSTANCE should be synchronous.
---exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 started
 
-# 2. Restart IM-main: kill it and IM-angel will restart it; wait for IM to
-# start accepting connections again.
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle mysqld2: waiting to start...
+--exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 started im_daemon_life_cycle
 
---exec $MYSQL_TEST_DIR/t/kill_n_check.sh $IM_PATH_PID restarted 30
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle mysqld2: started.
 
---exec $MYSQL_TEST_DIR/t/wait_for_socket.sh $EXE_MYSQL $IM_PATH_SOCK $IM_USERNAME $IM_PASSWORD '' 30
+# 2. Restart IM-main;
 
-# 3. Issue some statement -- connection should be re-established.
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle Killing IM-main...
+--exec $MYSQL_TEST_DIR/t/kill_n_check.sh $IM_PATH_PID restarted 30 im_daemon_life_cycle
 
-# Give some time to begin accepting connections after restart.
-# FIXME: race condition here.
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle Waiting for IM-main to start accepting connections...
+--exec $MYSQL_TEST_DIR/t/wait_for_socket.sh $EXE_MYSQL $IM_PATH_SOCK $IM_USERNAME $IM_PASSWORD '' 30 im_daemon_life_cycle
+
+# 3. Issue some statement -- connection should be re-established.
 
---sleep 3
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle Checking that IM-main processing commands...
 
 --replace_column 3 VERSION
 SHOW INSTANCE STATUS mysqld1;
@@ -67,6 +81,13 @@ SHOW INSTANCE STATUS mysqld1;
 # So, if it we do not stop it, it will be stopped by mysql-test-run.pl with
 # warning.
 
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle mysqld2: stopping...
 STOP INSTANCE mysqld2;
-# FIXME: STOP INSTANCE should be synchronous.
---exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 stopped
+
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle mysqld2: waiting to stop...
+--exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 stopped im_daemon_life_cycle
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle mysqld2: stopped.
+
+###########################################################################
+
+--exec $MYSQL_TEST_DIR/t/log.sh im_daemon_life_cycle BUG12751: done.
diff --git a/mysql-test/t/im_life_cycle.imtest b/mysql-test/t/im_life_cycle.imtest
index ddfb62d312e..3721b92e2b7 100644
--- a/mysql-test/t/im_life_cycle.imtest
+++ b/mysql-test/t/im_life_cycle.imtest
@@ -25,7 +25,7 @@
 
 START INSTANCE mysqld2;
 # FIXME: START INSTANCE should be synchronous.
---exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 started
+--exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 started im_life_cycle
 
 # FIXME: Result of SHOW INSTANCES here is not deterministic unless START
 # INSTANCE is synchronous. Even waiting for mysqld to start by looking at
@@ -58,7 +58,7 @@ SHOW VARIABLES LIKE 'port';
 
 STOP INSTANCE mysqld2;
 # FIXME: STOP INSTANCE should be synchronous.
---exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 stopped
+--exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 stopped im_life_cycle
 
 # FIXME: Result of SHOW INSTANCES here is not deterministic unless START
 # INSTANCE is synchronous. Even waiting for mysqld to start by looking at
@@ -121,7 +121,7 @@ STOP INSTANCE mysqld3;
 --echo -- 1.1.6.
 --echo --------------------------------------------------------------------
 
---exec $MYSQL_TEST_DIR/t/kill_n_check.sh $IM_MYSQLD1_PATH_PID restarted 30
+--exec $MYSQL_TEST_DIR/t/kill_n_check.sh $IM_MYSQLD1_PATH_PID restarted 30 im_life_cycle
 
 # Give some time to IM to detect that mysqld was restarted. It should be
 # longer than monitoring interval.
@@ -143,7 +143,7 @@ SHOW INSTANCES;
 
 START INSTANCE mysqld2;
 # FIXME: START INSTANCE should be synchronous.
---exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 started
+--exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 started im_life_cycle
 
 # FIXME: Result of SHOW INSTANCES here is not deterministic unless START
 # INSTANCE is synchronous. Even waiting for mysqld to start by looking at
@@ -151,7 +151,7 @@ START INSTANCE mysqld2;
 # mysqld has started.
 # SHOW INSTANCES;
 
---exec $MYSQL_TEST_DIR/t/kill_n_check.sh $IM_MYSQLD2_PATH_PID killed 10
+--exec $MYSQL_TEST_DIR/t/kill_n_check.sh $IM_MYSQLD2_PATH_PID killed 10 im_life_cycle
 
 # FIXME: Result of SHOW INSTANCES here is not deterministic unless START
 # INSTANCE is synchronous. Even waiting for mysqld to start by looking at
diff --git a/mysql-test/t/im_utils.imtest b/mysql-test/t/im_utils.imtest
index 52878f6c2b5..0866b87204a 100644
--- a/mysql-test/t/im_utils.imtest
+++ b/mysql-test/t/im_utils.imtest
@@ -31,10 +31,10 @@ SHOW INSTANCE OPTIONS mysqld2;
 #
 
 START INSTANCE mysqld2;
---exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 started
+--exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 started im_utils
 
 STOP INSTANCE mysqld2;
---exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 stopped
+--exec $MYSQL_TEST_DIR/t/wait_for_process.sh $IM_MYSQLD2_PATH_PID 30 stopped im_utils
 
 #
 # Check 'SHOW LOG FILES' command:
diff --git a/mysql-test/t/kill_n_check.sh b/mysql-test/t/kill_n_check.sh
index a54fb6ef8bb..96c402a638c 100755
--- a/mysql-test/t/kill_n_check.sh
+++ b/mysql-test/t/kill_n_check.sh
@@ -2,74 +2,101 @@
 
 ###########################################################################
 
-# NOTE: this script returns 0 (success) even in case of failure. This is
-# because this script is executed under mysql-test-run[.pl] and it's better to
-# examine particular problem in log file, than just having said that the test
-# case has failed.
+# NOTE: this script returns 0 (success) even in case of failure (except for
+# usage-error). This is because this script is executed under
+# mysql-test-run[.pl] and it's better to examine particular problem in log
+# file, than just having said that the test case has failed.
+
+###########################################################################
+
+basename=`basename "$0"`
+dirname=`dirname "$0"`
+
+###########################################################################
+
+. "$dirname/utils.sh"
 
 ###########################################################################
 
 check_restart()
 {
   if [ ! -r "$pid_path" ]; then
+    log_debug "No '$pid_path' found."
     user_msg='the process was killed'
     return 1
   fi
 
   new_pid=`cat "$pid_path" 2>/dev/null`
+  err_code=$?
 
-  if [ $? -eq 0 -a "$original_pid" = "$new_pid" ]; then
+  log_debug "err_code: $err_code; original_pid: $original_pid; new_pid: $new_pid."
+
+  if [ $err_code -eq 0 -a "$original_pid" = "$new_pid" ]; then
+    log_debug "The process was not restarted."
     user_msg='the process was not restarted'
     return 1
   fi
 
+  log_debug "The process was restarted."
   user_msg='the process was restarted'
   return 0
 }
 
 ###########################################################################
 
-if [ $# -ne 3 ]; then
-  echo "Usage: kill_n_check.sh <pid file path> killed|restarted <timeout>"
-  exit 0
+if [ $# -ne 4 ]; then
+  echo "Usage: $basename <pid file path> killed|restarted <timeout> <test id>"
+  exit 1
 fi
 
 pid_path="$1"
 expected_result="$2"
 total_timeout="$3"
+test_id="$4"
+log_file="$MYSQLTEST_VARDIR/log/$test_id.log"
+
+log_debug "-- $basename: starting --"
+log_debug "pid_path: '$pid_path'"
+log_debug "expected_result: '$expected_result'"
+log_debug "total_timeout: '$total_timeout'"
+log_debug "test_id: '$test_id'"
+log_debug "log_file: '$log_file'"
+
+###########################################################################
 
 if [ "$expected_result" != 'killed' -a \
      "$expected_result" != 'restarted' ]; then
-  echo "Error: invalid second argument ('killed' or 'restarted' expected)."
-  exit 0
+  log_error "Invalid second argument ($expected_result): 'killed' or 'restarted' expected."
+  quit 0
 fi
 
 if [ -z "$pid_path" ]; then
-  echo "Error: invalid PID path ($pid_path)."
-  exit 0
+  log_error "Invalid PID path ($pid_path)."
+  quit 0
 fi
 
 if [ ! -r "$pid_path" ]; then
-  echo "Error: PID file ($pid_path) does not exist."
-  exit 0
+  log_error "PID file ($pid_path) does not exist."
+  quit 0
 fi
 
 if [ -z "$total_timeout" ]; then
-  echo "Error: timeout is not specified."
-  exit 0
+  log_error "Timeout is not specified."
+  quit 0
 fi
 
 ###########################################################################
 
 original_pid=`cat "$pid_path"`
+log_debug "original_pid: $original_pid."
 
-echo "Killing the process..."
+log_info "Killing the process..."
 
 kill -9 $original_pid
 
 ###########################################################################
 
-echo "Sleeping..."
+log_info "Waiting..."
 
 if [ "$expected_result" = "restarted" ]; then
 
@@ -79,37 +106,42 @@ if [ "$expected_result" = "restarted" ]; then
 
   while true; do
 
+    log_debug "cur_attempt: $cur_attempt."
+
     if check_restart; then
-      echo "Success: $user_msg."
-      exit 0
+      log_info "Success: $user_msg."
+      quit 0
     fi
 
     [ $cur_attempt -ge $total_timeout ] && break
 
+    log_debug "Sleeping for 1 second..."
     sleep 1
 
     cur_attempt=`expr $cur_attempt + 1`
 
   done
 
-  echo "Error: $user_msg."
-  exit 0
+  log_error "$user_msg."
+  quit 0
 
 else # $expected_result == killed
 
   # Here we have to sleep for some long time to ensure that the process will
   # not be restarted.
 
+  log_debug "Sleeping for $total_timeout seconds..."
   sleep $total_timeout
 
   new_pid=`cat "$pid_path" 2>/dev/null`
+  log_debug "new_pid: $new_pid."
 
   if [ "$new_pid" -a "$new_pid" -ne "$original_pid" ]; then
-    echo "Error: the process was restarted."
+    log_error "The process was restarted."
   else
-    echo "Success: the process was killed."
+    log_info "Success: the process was killed."
   fi
 
-  exit 0
+  quit 0
 
 fi
diff --git a/mysql-test/t/log.sh b/mysql-test/t/log.sh
new file mode 100755
index 00000000000..20b265087cc
--- /dev/null
+++ b/mysql-test/t/log.sh
@@ -0,0 +1,24 @@
+#!/bin/bash
+
+###########################################################################
+
+basename=`basename "$0"`
+dirname=`dirname "$0"`
+
+###########################################################################
+
+. "$dirname/utils.sh"
+
+###########################################################################
+
+if [ $# -lt 2 ]; then
+  echo "Usage: $basename <test id> log message ..."
+  exit 1
+fi
+
+test_id="$1"
+log_file="$MYSQLTEST_VARDIR/log/$test_id.log"
+
+shift
+
+log_debug "$*"
diff --git a/mysql-test/t/ps.test b/mysql-test/t/ps.test
index 8d01277b515..547f9a766d1 100644
--- a/mysql-test/t/ps.test
+++ b/mysql-test/t/ps.test
@@ -848,6 +848,9 @@ drop table t1;
 # Bug#16365 Prepared Statements: DoS with too many open statements
 # Check that the limit @@max_prpeared_stmt_count works.
 #
+# This is also the test for bug#23159 prepared_stmt_count should be
+# status variable.
+#
 # Save the old value
 set @old_max_prepared_stmt_count= @@max_prepared_stmt_count;
 #
@@ -857,17 +860,17 @@ set @old_max_prepared_stmt_count= @@max_prepared_stmt_count;
 #
 --disable_ps_protocol
 #
-# A. Check that the new variables are present in SHOW VARIABLES list.
+# A. Check that the new variables are present in SHOW VARIABLES and
+# SHOW STATUS lists.
 #
 show variables like 'max_prepared_stmt_count';
-show variables like 'prepared_stmt_count';
+show status like 'prepared_stmt_count';
 #
-# B. Check that the new variables are selectable.
+# B. Check that the new system variable is selectable.
 #
-select @@max_prepared_stmt_count, @@prepared_stmt_count;
+select @@max_prepared_stmt_count;
 #
-# C. Check that max_prepared_stmt_count is settable (global only),
-#    whereas prepared_stmt_count is readonly.
+# C. Check that max_prepared_stmt_count is settable (global only).
 #
 set global max_prepared_stmt_count=-1;
 select @@max_prepared_stmt_count;
@@ -881,12 +884,6 @@ set @@max_prepared_stmt_count=1;
 set max_prepared_stmt_count=1;
 --error ER_GLOBAL_VARIABLE
 set local max_prepared_stmt_count=1;
---error ER_INCORRECT_GLOBAL_LOCAL_VAR
-set local prepared_stmt_count=0;
---error ER_INCORRECT_GLOBAL_LOCAL_VAR
-set @@prepared_stmt_count=0;
---error ER_INCORRECT_GLOBAL_LOCAL_VAR 
-set global prepared_stmt_count=1;
 # set to a reasonable limit works
 set global max_prepared_stmt_count=1;
 select @@max_prepared_stmt_count;
@@ -894,47 +891,50 @@ select @@max_prepared_stmt_count;
 # D. Check that the variables actually work.
 #
 set global max_prepared_stmt_count=0;
-select @@max_prepared_stmt_count, @@prepared_stmt_count;
+select @@max_prepared_stmt_count;
+show status like 'prepared_stmt_count';
 --error ER_MAX_PREPARED_STMT_COUNT_REACHED
 prepare stmt from "select 1";
-select @@prepared_stmt_count;
+show status like 'prepared_stmt_count';
 set global max_prepared_stmt_count=1;
 prepare stmt from "select 1";
-select @@prepared_stmt_count;
+show status like 'prepared_stmt_count';
 --error ER_MAX_PREPARED_STMT_COUNT_REACHED
 prepare stmt1 from "select 1";
-select @@prepared_stmt_count;
+show status like 'prepared_stmt_count';
 deallocate prepare stmt;
-select @@prepared_stmt_count;
+show status like 'prepared_stmt_count';
 #
 # E. Check that we can prepare a statement with the same name 
 # successfully, without hitting the limit.
 #
 prepare stmt from "select 1";
-select @@prepared_stmt_count;
+show status like 'prepared_stmt_count';
 prepare stmt from "select 2";
-select @@prepared_stmt_count;
+show status like 'prepared_stmt_count';
 #
 # F. We can set the max below the current count. In this case no new 
 # statements should be allowed to prepare.
 #
-select @@prepared_stmt_count, @@max_prepared_stmt_count;
+show status like 'prepared_stmt_count';
+select @@max_prepared_stmt_count;
 set global max_prepared_stmt_count=0;
 --error ER_MAX_PREPARED_STMT_COUNT_REACHED
 prepare stmt from "select 1";
 # Result: the old statement is deallocated, the new is not created.
---error 1243 # ER_UNKNOWN_STMT_HANDLER
+--error ER_UNKNOWN_STMT_HANDLER
 execute stmt;
-select @@prepared_stmt_count;
+show status like 'prepared_stmt_count';
 --error ER_MAX_PREPARED_STMT_COUNT_REACHED
 prepare stmt from "select 1";
-select @@prepared_stmt_count;
+show status like 'prepared_stmt_count';
 #
 # G. Show that the variables are up to date even after a connection with all
 # statements in it was terminated.
 #
 set global max_prepared_stmt_count=3;
-select @@max_prepared_stmt_count, @@prepared_stmt_count;
+select @@max_prepared_stmt_count;
+show status like 'prepared_stmt_count';
 prepare stmt from "select 1";
 connect (con1,localhost,root,,);
 connection con1;
@@ -943,26 +943,20 @@ prepare stmt1 from "select 3";
 --error ER_MAX_PREPARED_STMT_COUNT_REACHED
 prepare stmt2 from "select 4";
 connection default;
---error ER_MAX_PREPARED_STMT_COUNT_REACHED
+--error ER_MAX_PREPARED_STMT_COUNT_REACHED 
 prepare stmt2 from "select 4";
-select @@max_prepared_stmt_count, @@prepared_stmt_count;
+select @@max_prepared_stmt_count;
+show status like 'prepared_stmt_count';
 disconnect con1;
 connection default;
-# Wait for the connection to die: deal with a possible race
 deallocate prepare stmt;
-let $count= `select @@prepared_stmt_count`;
-if ($count)
-{
---sleep 2
-  let $count= `select @@prepared_stmt_count`;
-}
-select @@max_prepared_stmt_count, @@prepared_stmt_count;
 #
 # Restore the old value.
 #
 set global max_prepared_stmt_count= @old_max_prepared_stmt_count;
 --enable_ps_protocol
 
+
 #
 # Bug#19399 "Stored Procedures 'Lost Connection' when dropping/creating
 #            tables"
@@ -1514,6 +1508,29 @@ DROP TABLE t1, t2;
 
 
 #
+# BUG#20327: Marking of a wrong field leads to a wrong result on select with
+#            view, prepared statement and subquery.
+#
+CREATE TABLE t1 (i INT);
+CREATE VIEW v1 AS SELECT * FROM t1;
+
+INSERT INTO t1 VALUES (1), (2);
+
+let $query = SELECT t1.i FROM t1 JOIN v1 ON t1.i = v1.i
+             WHERE EXISTS (SELECT * FROM t1 WHERE v1.i = 1);
+eval $query;
+eval PREPARE stmt FROM "$query";
+# Statement execution should return '1'.
+EXECUTE stmt;
+# Check re-execution.
+EXECUTE stmt;
+
+DEALLOCATE PREPARE stmt;
+DROP VIEW v1;
+DROP TABLE t1;
+
+
+#
 # BUG#21856: Prepared Statments: crash if bad create
 #
 --disable_warnings
diff --git a/mysql-test/t/rpl_trigger.test b/mysql-test/t/rpl_trigger.test
index d6e9410b1d3..faba89e7a73 100644
--- a/mysql-test/t/rpl_trigger.test
+++ b/mysql-test/t/rpl_trigger.test
@@ -423,6 +423,43 @@ DROP TABLE t2;
 --sync_with_master
 --connection master
 
+#
+# BUG#23703: DROP TRIGGER needs an IF EXISTS
+#
+
+connection master;
+
+--disable_warnings
+drop table if exists t1;
+--enable_warnings
+
+create table t1(a int, b varchar(50));
+
+-- error ER_TRG_DOES_NOT_EXIST
+drop trigger not_a_trigger;
+
+drop trigger if exists not_a_trigger;
+
+create trigger t1_bi before insert on t1
+for each row set NEW.b := "In trigger t1_bi";
+
+insert into t1 values (1, "a");
+drop trigger if exists t1_bi;
+insert into t1 values (2, "b");
+drop trigger if exists t1_bi;
+insert into t1 values (3, "c");
+
+select * from t1;
+
+save_master_pos;
+connection slave;
+sync_with_master;
+
+select * from t1;
+
+connection master;
+
+drop table t1;
 
 #
 # End of tests
diff --git a/mysql-test/t/trigger.test b/mysql-test/t/trigger.test
index 92320648033..a9395c12a63 100644
--- a/mysql-test/t/trigger.test
+++ b/mysql-test/t/trigger.test
@@ -1499,4 +1499,52 @@ select * from t1;
 drop table t1;
 
 
+#
+# Bug #23651 "Server crashes when trigger which uses stored function
+#             invoked from different connections".
+#
+--disable_warnings
+drop table if exists t1;
+drop function if exists f1;
+--enable_warnings
+create table t1 (i int);
+create function f1() returns int return 10;
+create trigger t1_bi before insert on t1 for each row set @a:= f1() + 10;
+insert into t1 values ();
+select @a;
+connection addconroot1;
+insert into t1 values ();
+select @a;
+connection default;
+drop table t1;
+drop function f1;
+
+#
+# Bug#23703: DROP TRIGGER needs an IF EXISTS
+#
+
+--disable_warnings
+drop table if exists t1;
+--enable_warnings
+
+create table t1(a int, b varchar(50));
+
+-- error ER_TRG_DOES_NOT_EXIST
+drop trigger not_a_trigger;
+
+drop trigger if exists not_a_trigger;
+
+create trigger t1_bi before insert on t1
+for each row set NEW.b := "In trigger t1_bi";
+
+insert into t1 values (1, "a");
+drop trigger if exists t1_bi;
+insert into t1 values (2, "b");
+drop trigger if exists t1_bi;
+insert into t1 values (3, "c");
+
+select * from t1;
+
+drop table t1;
+
 --echo End of 5.0 tests
diff --git a/mysql-test/t/type_bit.test b/mysql-test/t/type_bit.test
index d46ba667665..48ad24ff6b7 100644
--- a/mysql-test/t/type_bit.test
+++ b/mysql-test/t/type_bit.test
@@ -261,4 +261,15 @@ insert into t1 (b, a) values ('2', '1');
 select hex(a), b from t1;
 drop table t1;
 
+#
+# type was not properly initalized, which caused key_copy to fail
+#
+
+create table t1(bit_field bit(2), int_field int, key a(bit_field));
+insert into t1 values (1,2);
+handler t1 open as t1;
+handler t1 read a=(1);
+handler t1 close;
+drop table t1;
+
 --echo End of 5.0 tests
diff --git a/mysql-test/t/type_varchar.test b/mysql-test/t/type_varchar.test
index 439e98471b2..7b87a388c56 100644
--- a/mysql-test/t/type_varchar.test
+++ b/mysql-test/t/type_varchar.test
@@ -187,3 +187,13 @@ left join t3 on t1.id=t3.id order by t3.id;
 --disable_metadata
 --enable_ps_protocol
 drop table t1, t2, t3;
+
+#
+# Bug #11927: Warnings shown for CAST( chr as signed) but not (chr + 0)
+#
+CREATE TABLE t1 (a CHAR(2));
+INSERT INTO t1 VALUES (10), (50), (30), ('1a'), (60), ('t');
+SELECT a,(a + 0) FROM t1 ORDER BY a;
+SELECT a,(a DIV 2) FROM t1 ORDER BY a;
+SELECT a,CAST(a AS SIGNED) FROM t1 ORDER BY a;
+DROP TABLE t1;
diff --git a/mysql-test/t/utils.sh b/mysql-test/t/utils.sh
new file mode 100644
index 00000000000..b3f4744947d
--- /dev/null
+++ b/mysql-test/t/utils.sh
@@ -0,0 +1,55 @@
+###########################################################################
+#
+# This file provides utility functions and is included by other scripts.
+#
+# The following global variables must be set before calling functions from this
+# file:
+#   - basename -- base name of the calling script (main application);
+#   - log_file -- where to store log records;
+#
+###########################################################################
+
+log()
+{
+  [ -z "$log_file" ] && return;
+
+  log_level="$1"
+  log_msg="$2"
+  ts=`date`
+
+  echo "[$ts] [$basename] [$log_level] $log_msg" >> "$log_file";
+}
+
+###########################################################################
+
+log_debug()
+{
+  log 'DEBUG' "$1"
+}
+
+###########################################################################
+
+log_info()
+{
+  log 'INFO' "$1"
+  echo "$1"
+}
+
+###########################################################################
+
+log_error()
+{
+  log 'ERROR' "$1"
+  echo "Error: $1"
+}
+
+###########################################################################
+
+quit()
+{
+  exit_status="$1"
+
+  log_debug "-- $basename: finished (exit_status: $exit_status) --"
+
+  exit $exit_status
+}
diff --git a/mysql-test/t/view_grant.test b/mysql-test/t/view_grant.test
index 71293fe6b13..67e0ab6bcbd 100644
--- a/mysql-test/t/view_grant.test
+++ b/mysql-test/t/view_grant.test
@@ -927,4 +927,41 @@ DROP VIEW v2;
 DROP VIEW v1;
 DROP USER mysqltest_u1@localhost;
 
+#
+# Bug#17254: Error for DEFINER security on VIEW provides too much info
+#
+connect (root,localhost,root,,);
+connection root;
+CREATE DATABASE db17254;
+USE db17254;
+CREATE TABLE t1 (f1 INT);
+INSERT INTO t1 VALUES (10),(20);
+CREATE USER def_17254@localhost;
+GRANT SELECT ON db17254.* TO def_17254@localhost;
+CREATE USER inv_17254@localhost;
+GRANT SELECT ON db17254.t1 TO inv_17254@localhost;
+GRANT CREATE VIEW ON db17254.* TO def_17254@localhost;
+
+connect (def,localhost,def_17254,,db17254);
+connection def;
+CREATE VIEW v1 AS SELECT * FROM t1;
+
+connection root;
+DROP USER def_17254@localhost;
+
+connect (inv,localhost,inv_17254,,db17254);
+connection inv;
+--echo for a user
+--error 1142
+SELECT * FROM v1;
+
+connection root;
+--echo for a superuser
+--error 1449
+SELECT * FROM v1;
+DROP USER inv_17254@localhost;
+DROP DATABASE db17254;
+disconnect def;
+disconnect inv;
+
 # End of 5.0 tests.
diff --git a/mysql-test/t/wait_for_process.sh b/mysql-test/t/wait_for_process.sh
index df0f4a17e3a..4c2d89cfea6 100755
--- a/mysql-test/t/wait_for_process.sh
+++ b/mysql-test/t/wait_for_process.sh
@@ -2,34 +2,40 @@
 
 ###########################################################################
 
-pid_path="$1"
-total_attempts="$2"
-event="$3"
+# NOTE: this script returns 0 (success) even in case of failure (except for
+# usage-error). This is because this script is executed under
+# mysql-test-run[.pl] and it's better to examine particular problem in log
+# file, than just having said that the test case has failed.
 
-case "$3" in
-  started)
-    check_fn='check_started';
-    ;;
+###########################################################################
 
-  stopped)
-    check_fn='check_stopped';
-    ;;
+basename=`basename "$0"`
+dirname=`dirname "$0"`
 
-  *)
-    echo "Error: invalid third argument ('started' or 'stopped' expected)."
-    exit 0
-esac
+###########################################################################
+
+. "$dirname/utils.sh"
 
 ###########################################################################
 
 check_started()
 {
-  [ ! -r "$pid_path" ] && return 1
+  if [ ! -r "$pid_path" ]; then
+    log_debug "No PID-file ($pid_path) found -- not started."
+    return 1
+  fi
 
   new_pid=`cat "$pid_path" 2>/dev/null`
+  err_code=$?
+
+  log_debug "err_code: $err_code; new_pid: $new_pid."
 
-  [ $? -eq 0 -a "$original_pid" = "$new_pid" ] && return 1
+  if [ $? -ne 0 -o -z "$new_pid" ]; then
+    log_debug "The process was not started."
+    return 1
+  fi
 
+  log_debug "The process was started."
   return 0
 }
 
@@ -37,30 +43,72 @@ check_started()
 
 check_stopped()
 {
-  [ -r "$pid_path" ] && return 1
+  if [ -r "$pid_path" ]; then
+    log_debug "PID-file '$pid_path' exists -- not stopped."
+    return 1
+  fi
 
+  log_debug "No PID-file ($pid_path) found -- stopped."
   return 0
 }
 
 ###########################################################################
 
+if [ $# -ne 4 ]; then
+  echo "Usage: $basename <pid file path> <total attempts> started|stopped <test id>"
+  exit 1
+fi
+
+pid_path="$1"
+total_attempts="$2"
+event="$3"
+test_id="$4"
+log_file="$MYSQLTEST_VARDIR/log/$test_id.log"
+
+log_debug "-- $basename: starting --"
+log_debug "pid_path: '$pid_path'"
+log_debug "total_attempts: '$total_attempts'"
+log_debug "event: '$event'"
+log_debug "test_id: '$test_id'"
+log_debug "log_file: '$log_file'"
+
+###########################################################################
+
+case "$event" in
+  started)
+    check_fn='check_started';
+    ;;
+
+  stopped)
+    check_fn='check_stopped';
+    ;;
+
+  *)
+    log_error "Invalid third argument ('started' or 'stopped' expected)."
+    quit 0
+esac
+
+###########################################################################
+
 cur_attempt=1
 
 while true; do
 
+  log_debug "cur_attempt: $cur_attempt."
+
   if ( eval $check_fn ); then
-    echo "Success: the process has been $event."
-    exit 0
+    log_info "Success: the process has been $event."
+    quit 0
   fi
 
   [ $cur_attempt -ge $total_attempts ] && break
 
+  log_debug "Sleeping for 1 second..."
   sleep 1
 
   cur_attempt=`expr $cur_attempt + 1`
 
 done
 
-echo "Error: the process has not been $event in $total_attempts secs."
-exit 0
-
+log_error "The process has not been $event in $total_attempts secs."
+quit 0
diff --git a/mysql-test/t/wait_for_socket.sh b/mysql-test/t/wait_for_socket.sh
index b6526b7d19c..1bce74dfd3a 100755
--- a/mysql-test/t/wait_for_socket.sh
+++ b/mysql-test/t/wait_for_socket.sh
@@ -2,9 +2,25 @@
 
 ###########################################################################
 
-if [ $# -ne 6 ]; then
-  echo "Usage: wait_for_socket.sh <executable path> <socket path> <username> <password> <db> <timeout>"
-  exit 0
+# NOTE: this script returns 0 (success) even in case of failure (except for
+# usage-error). This is because this script is executed under
+# mysql-test-run[.pl] and it's better to examine particular problem in log
+# file, than just having said that the test case has failed.
+
+###########################################################################
+
+basename=`basename "$0"`
+dirname=`dirname "$0"`
+
+###########################################################################
+
+. "$dirname/utils.sh"
+
+###########################################################################
+
+if [ $# -ne 7 ]; then
+  echo "Usage: wait_for_socket.sh <executable path> <socket path> <username> <password> <db> <timeout> <test id>"
+  exit 1
 fi
 
 client_exe="$1"
@@ -13,22 +29,34 @@ username="$3"
 password="$4"
 db="$5"
 total_timeout="$6"
+test_id="$7"
+log_file="$MYSQLTEST_VARDIR/log/$test_id.log"
+
+log_debug "-- $basename: starting --"
+log_debug "client_exe: '$client_exe'"
+log_debug "socket_path: '$socket_path'"
+log_debug "username: '$username'"
+log_debug "password: '$password'"
+log_debug "db: '$db'"
+log_debug "total_timeout: '$total_timeout'"
+log_debug "test_id: '$test_id'"
+log_debug "log_file: '$log_file'"
 
 ###########################################################################
 
 if [ -z "$client_exe" ]; then
-  echo "Error: invalid path to client executable ($client_exe)."
-  exit 0;
+  log_error "Invalid path to client executable ($client_exe)."
+  quit 0;
 fi
 
 if [ ! -x "$client_exe" ]; then
-  echo "Error: client by path '$client_exe' is not available."
-  exit 0;
+  log_error "Client by path '$client_exe' is not available."
+  quit 0;
 fi
 
 if [ -z "$socket_path" ]; then
-  echo "Error: invalid socket patch."
-  exit 0
+  log_error "Invalid socket patch ($socket_path)."
+  quit 0
 fi
 
 ###########################################################################
@@ -39,15 +67,19 @@ client_args="--silent --socket=$socket_path --connect_timeout=1 "
 [ -n "$password" ] && client_args="$client_args --password=$password "
 [ -n "$db" ] && client_args="$client_args $db"
 
+log_debug "client_args: '$client_args'"
+
 ###########################################################################
 
 cur_attempt=1
 
 while true; do
 
+  log_debug "cur_attempt: $cur_attempt."
+
   if ( echo 'quit' | "$client_exe" $client_args >/dev/null 2>&1 ); then
-    echo "Success: server is ready to accept connection on socket."
-    exit 0
+    log_info "Success: server is ready to accept connection on socket."
+    quit 0
   fi
 
   [ $cur_attempt -ge $total_timeout ] && break
@@ -58,5 +90,5 @@ while true; do
 
 done
 
-echo "Error: server does not accept connections after $total_timeout seconds."
-exit 0
+log_error "Server does not accept connections after $total_timeout seconds."
+quit 0