Merge branch '10.2' into 10.3

23 files changed, 142 insertions, 105 deletions

diff --git a/pcre/AUTHORS b/pcre/AUTHORS
index bb8b32835bd..b3398bbc477 100644
--- a/pcre/AUTHORS
+++ b/pcre/AUTHORS
@@ -2,13 +2,13 @@ THE MAIN PCRE LIBRARY
 ---------------------
 
 Written by:       Philip Hazel
-Email local part: ph10
-Email domain:     cam.ac.uk
+Email local part: Philip.Hazel
+Email domain:     gmail.com
 
 University of Cambridge Computing Service,
 Cambridge, England.
 
-Copyright (c) 1997-2020 University of Cambridge
+Copyright (c) 1997-2021 University of Cambridge
 All rights reserved
 
 
@@ -19,7 +19,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2010-2020 Zoltan Herczeg
+Copyright(c) 2010-2021 Zoltan Herczeg
 All rights reserved.
 
 
@@ -30,7 +30,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2009-2020 Zoltan Herczeg
+Copyright(c) 2009-2021 Zoltan Herczeg
 All rights reserved.
 
 
diff --git a/pcre/CMakeLists.txt b/pcre/CMakeLists.txt
index 857a96b9ef9..de8951d02fe 100644
--- a/pcre/CMakeLists.txt
+++ b/pcre/CMakeLists.txt
@@ -67,10 +67,17 @@
 # 2013-11-05 PH added support for PARENS_NEST_LIMIT
 # 2016-03-01 PH applied Chris Wilson's patch for MSVC static build
 # 2016-06-24 PH applied Chris Wilson's revised patch (adds a separate option)
+# 2021-06-14 PH changed CMAKE_MODULE_PATH definition to add, not replace
+# 2021-06-14 PH applied Wolfgang Stöggl's patch for generating pcre-config and
+#            libpcre*.pc files (Bugzilla #2583)
 
 PROJECT(PCRE C CXX)
 
-SET(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake) # for FindReadline.cmake
+# For FindReadline.cmake. This was changed to allow setting CMAKE_MODULE_PATH
+# on the command line.
+# SET(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake) # for FindReadline.cmake
+
+LIST(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake)
 
 # Enable Unicode properties
 OPTION(PCRE_SUPPORT_UNICODE_PROPERTIES "Unicode properties" ON)
@@ -83,6 +90,7 @@ INCLUDE(CheckIncludeFile)
 INCLUDE(CheckIncludeFileCXX)
 INCLUDE(CheckFunctionExists)
 INCLUDE(CheckTypeSize)
+INCLUDE(GNUInstallDirs) # for CMAKE_INSTALL_LIBDIR
 
 CHECK_INCLUDE_FILE(dirent.h     HAVE_DIRENT_H)
 CHECK_INCLUDE_FILE(stdint.h     HAVE_STDINT_H)
@@ -255,7 +263,7 @@ foreach(configure_line ${configure_lines})
     foreach(_substitution_variable ${SEARCHED_VARIABLES})
         string(TOUPPER ${_substitution_variable} _substitution_variable_upper)
         if (NOT ${_substitution_variable_upper})
-            string(REGEX MATCH "m4_define\\(${_substitution_variable}, \\[(.*)\\]" MACTHED_STRING ${configure_line})
+            string(REGEX MATCH "m4_define\\(${_substitution_variable}, \\[(.*)\\]" MATCHED_STRING ${configure_line})
             if (CMAKE_MATCH_1)
                 set(${_substitution_variable_upper} ${CMAKE_MATCH_1})
             endif()
@@ -442,7 +450,6 @@ MARK_AS_ADVANCED(PCRE_POSIX_MALLOC_THRESHOLD)
 MARK_AS_ADVANCED(PCRE_SUPPORT_BSR_ANYCRLF)
 MARK_AS_ADVANCED(PCRE_SUPPORT_UNICODE_PROPERTIES)
 
-
 IF(PCRE_SHOW_REPORT)
   STRING(TOUPPER "${CMAKE_BUILD_TYPE}" buildtype)
   IF (CMAKE_C_FLAGS)
@@ -453,7 +460,7 @@ IF(PCRE_SHOW_REPORT)
   ENDIF(CMAKE_CXX_FLAGS)
   MESSAGE(STATUS "")
   MESSAGE(STATUS "")
-  MESSAGE(STATUS "PCRE configuration summary:")
+  MESSAGE(STATUS "PCRE-${PCRE_MAJOR}.${PCRE_MINOR} configuration summary:")
   MESSAGE(STATUS "")
 #  MESSAGE(STATUS "  Install prefix .................. : ${CMAKE_INSTALL_PREFIX}")
   MESSAGE(STATUS "  C compiler ...................... : ${CMAKE_C_COMPILER}")
diff --git a/pcre/ChangeLog b/pcre/ChangeLog
index 864ce2c3574..ed9d83207c3 100644
--- a/pcre/ChangeLog
+++ b/pcre/ChangeLog
@@ -1,8 +1,25 @@
 ChangeLog for PCRE
 ------------------
 
-Note that the PCRE 8.xx series (PCRE1) is now in a bugfix-only state. All
-development is happening in the PCRE2 10.xx series.
+Note that the PCRE 8.xx series (PCRE1) is now at end of life. All development
+is happening in the PCRE2 10.xx series.
+
+
+Version 8.45 15-June-2021
+-------------------------
+
+This is the final release of PCRE1. A few minor tidies are included.
+
+1. CMakeLists.txt has two user-supplied patches applied, one to allow for the
+setting of MODULE_PATH, and the other to support the generation of pcre-config
+file and libpcre*.pc files.
+
+2. There was a memory leak if a compile error occurred when there were more
+than 20 named groups (Bugzilla #2613).
+
+3. Fixed some typos in code and documentation.
+
+4. Fixed a small (*MARK) bug in the interpreter (Bugzilla #2771).
 
 
 Version 8.44 12 February-2020
diff --git a/pcre/LICENCE b/pcre/LICENCE
index 57a544814c8..803b4119e50 100644
--- a/pcre/LICENCE
+++ b/pcre/LICENCE
@@ -19,13 +19,13 @@ THE BASIC LIBRARY FUNCTIONS
 ---------------------------
 
 Written by:       Philip Hazel
-Email local part: ph10
-Email domain:     cam.ac.uk
+Email local part: Philip.Hazel
+Email domain:     gmail.com
 
 University of Cambridge Computing Service,
 Cambridge, England.
 
-Copyright (c) 1997-2020 University of Cambridge
+Copyright (c) 1997-2021 University of Cambridge
 All rights reserved.
 
 
@@ -36,7 +36,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Email domain:     freemail.hu
 
-Copyright(c) 2010-2020 Zoltan Herczeg
+Copyright(c) 2010-2021 Zoltan Herczeg
 All rights reserved.
 
 
@@ -47,7 +47,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Email domain:     freemail.hu
 
-Copyright(c) 2009-2020 Zoltan Herczeg
+Copyright(c) 2009-2021 Zoltan Herczeg
 All rights reserved.
 
 
diff --git a/pcre/NEWS b/pcre/NEWS
index 3d91b67dfa9..bec4d4b3d39 100644
--- a/pcre/NEWS
+++ b/pcre/NEWS
@@ -1,8 +1,14 @@
 News about PCRE releases
 ------------------------
 
-Note that this library (now called PCRE1) is now being maintained for bug fixes
-only. New projects are advised to use the new PCRE2 libraries.
+Note that this library (now called PCRE1) is no longer being maintained. New
+projects are advised to use the PCRE2 libraries.
+
+
+Release 8.45 15-June-2021
+-----------------------------
+
+This is the final PCRE1 release. A very few small issues have been fixed.
 
 
 Release 8.44 12-February-2020
diff --git a/pcre/NON-AUTOTOOLS-BUILD b/pcre/NON-AUTOTOOLS-BUILD
index 37f6164475b..23c4e64f84a 100644
--- a/pcre/NON-AUTOTOOLS-BUILD
+++ b/pcre/NON-AUTOTOOLS-BUILD
@@ -5,8 +5,8 @@ NOTE: This document relates to PCRE releases that use the original API, with
 library names libpcre, libpcre16, and libpcre32. January 2015 saw the first
 release of a new API, known as PCRE2, with release numbers starting at 10.00
 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old libraries
-(now called PCRE1) are still being maintained for bug fixes, but there will be
-no new development. New projects are advised to use the new PCRE2 libraries.
+(now called PCRE1) are now at end of life, and 8.45 is the final release. New
+projects are advised to use the new PCRE2 libraries.
 
 
 This document contains the following sections:
@@ -768,6 +768,6 @@ Everything, source and executable, is in EBCDIC and native z/OS file formats.
 However, this software is not maintained and will not be upgraded. If you are
 new to PCRE you should be looking at PCRE2 (version 10.30 or later).
 
-===============================
-Last Updated: 13 September 2017
-===============================
+==========================
+Last Updated: 15 June 2021
+==========================
diff --git a/pcre/README b/pcre/README
index 334362b3e53..65f5e19ef69 100644
--- a/pcre/README
+++ b/pcre/README
@@ -5,9 +5,8 @@ NOTE: This set of files relates to PCRE releases that use the original API,
 with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
 first release of a new API, known as PCRE2, with release numbers starting at
 10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
-libraries (now called PCRE1) are still being maintained for bug fixes, but
-there will be no new development. New projects are advised to use the new PCRE2
-libraries.
+libraries (now called PCRE1) are now at end of life, and 8.45 is the final
+release. New projects are advised to use the new PCRE2 libraries.
 
 
 The latest release of PCRE1 is always available in three alternative formats
@@ -998,6 +997,6 @@ pcre_xxx, one with the name pcre16_xx, and a third with the name pcre32_xxx.
   RunTest.bat            a script for running tests under Windows
 
 Philip Hazel
-Email local part: ph10
-Email domain: cam.ac.uk
-Last updated: 12 February 2020
+Email local part: Philip.Hazel
+Email domain: gmail.com
+Last updated: 15 June 2021
diff --git a/pcre/configure.ac b/pcre/configure.ac
index 6a3e5f35d8e..4d2e2f37747 100644
--- a/pcre/configure.ac
+++ b/pcre/configure.ac
@@ -9,17 +9,17 @@ dnl The PCRE_PRERELEASE feature is for identifying release candidates. It might
 dnl be defined as -RC2, for example. For real releases, it should be empty.
 
 m4_define(pcre_major, [8])
-m4_define(pcre_minor, [44])
+m4_define(pcre_minor, [45])
 m4_define(pcre_prerelease, [])
-m4_define(pcre_date, [2020-02-12])
+m4_define(pcre_date, [2021-06-15])
 
 # NOTE: The CMakeLists.txt file searches for the above variables in the first
 # 50 lines of this file. Please update that if the variables above are moved.
 
 # Libtool shared library interface versions (current:revision:age)
-m4_define(libpcre_version, [3:12:2])
-m4_define(libpcre16_version, [2:12:2])
-m4_define(libpcre32_version, [0:12:0])
+m4_define(libpcre_version, [3:13:2])
+m4_define(libpcre16_version, [2:13:2])
+m4_define(libpcre32_version, [0:13:0])
 m4_define(libpcreposix_version, [0:7:0])
 m4_define(libpcrecpp_version, [0:2:0])
 
diff --git a/pcre/doc/html/NON-AUTOTOOLS-BUILD.txt b/pcre/doc/html/NON-AUTOTOOLS-BUILD.txt
index 37f6164475b..23c4e64f84a 100644
--- a/pcre/doc/html/NON-AUTOTOOLS-BUILD.txt
+++ b/pcre/doc/html/NON-AUTOTOOLS-BUILD.txt
@@ -5,8 +5,8 @@ NOTE: This document relates to PCRE releases that use the original API, with
 library names libpcre, libpcre16, and libpcre32. January 2015 saw the first
 release of a new API, known as PCRE2, with release numbers starting at 10.00
 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old libraries
-(now called PCRE1) are still being maintained for bug fixes, but there will be
-no new development. New projects are advised to use the new PCRE2 libraries.
+(now called PCRE1) are now at end of life, and 8.45 is the final release. New
+projects are advised to use the new PCRE2 libraries.
 
 
 This document contains the following sections:
@@ -768,6 +768,6 @@ Everything, source and executable, is in EBCDIC and native z/OS file formats.
 However, this software is not maintained and will not be upgraded. If you are
 new to PCRE you should be looking at PCRE2 (version 10.30 or later).
 
-===============================
-Last Updated: 13 September 2017
-===============================
+==========================
+Last Updated: 15 June 2021
+==========================
diff --git a/pcre/doc/html/README.txt b/pcre/doc/html/README.txt
index 334362b3e53..65f5e19ef69 100644
--- a/pcre/doc/html/README.txt
+++ b/pcre/doc/html/README.txt
@@ -5,9 +5,8 @@ NOTE: This set of files relates to PCRE releases that use the original API,
 with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
 first release of a new API, known as PCRE2, with release numbers starting at
 10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
-libraries (now called PCRE1) are still being maintained for bug fixes, but
-there will be no new development. New projects are advised to use the new PCRE2
-libraries.
+libraries (now called PCRE1) are now at end of life, and 8.45 is the final
+release. New projects are advised to use the new PCRE2 libraries.
 
 
 The latest release of PCRE1 is always available in three alternative formats
@@ -998,6 +997,6 @@ pcre_xxx, one with the name pcre16_xx, and a third with the name pcre32_xxx.
   RunTest.bat            a script for running tests under Windows
 
 Philip Hazel
-Email local part: ph10
-Email domain: cam.ac.uk
-Last updated: 12 February 2020
+Email local part: Philip.Hazel
+Email domain: gmail.com
+Last updated: 15 June 2021
diff --git a/pcre/doc/html/pcre.html b/pcre/doc/html/pcre.html
index 0db75e44892..31391f5c00a 100644
--- a/pcre/doc/html/pcre.html
+++ b/pcre/doc/html/pcre.html
@@ -22,13 +22,12 @@ man page, in case the conversion went wrong.
 </ul>
 <br><a name="SEC1" href="#TOC1">PLEASE TAKE NOTE</a><br>
 <P>
-This document relates to PCRE releases that use the original API,
-with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
-first release of a new API, known as PCRE2, with release numbers starting at
-10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
-libraries (now called PCRE1) are still being maintained for bug fixes, but
-there will be no new development. New projects are advised to use the new PCRE2
-libraries.
+This document relates to PCRE releases that use the original API, with library
+names libpcre, libpcre16, and libpcre32. January 2015 saw the first release of
+a new API, known as PCRE2, with release numbers starting at 10.00 and library
+names libpcre2-8, libpcre2-16, and libpcre2-32. The old libraries (now called
+PCRE1) are now at end of life, and 8.45 is the final release. New projects are
+advised to use the new PCRE2 libraries.
 </P>
 <br><a name="SEC2" href="#TOC1">INTRODUCTION</a><br>
 <P>
@@ -215,9 +214,9 @@ two digits 10, at the domain cam.ac.uk.
 </P>
 <br><a name="SEC6" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 10 February 2015
+Last updated: 14 June 2021
 <br>
-Copyright &copy; 1997-2015 University of Cambridge.
+Copyright &copy; 1997-2021 University of Cambridge.
 <br>
 <p>
 Return to the <a href="index.html">PCRE index page</a>.
diff --git a/pcre/doc/html/pcreapi.html b/pcre/doc/html/pcreapi.html
index 2fdfbff5ccf..2a0491f0f82 100644
--- a/pcre/doc/html/pcreapi.html
+++ b/pcre/doc/html/pcreapi.html
@@ -1718,7 +1718,7 @@ very long time, and so the <i>match_limit</i> value is also used in this case
 <P>
 The default value for the limit can be set when PCRE is built; the default
 default is 10 million, which handles all but the most extreme cases. You can
-override the default by suppling <b>pcre_exec()</b> with a <b>pcre_extra</b>
+override the default by supplying <b>pcre_exec()</b> with a <b>pcre_extra</b>
 block in which <i>match_limit</i> is set, and PCRE_EXTRA_MATCH_LIMIT is set in
 the <i>flags</i> field. If the limit is exceeded, <b>pcre_exec()</b> returns
 PCRE_ERROR_MATCHLIMIT.
@@ -1749,7 +1749,7 @@ and is ignored, when matching is done using JIT compiled code.
 <P>
 The default value for <i>match_limit_recursion</i> can be set when PCRE is
 built; the default default is the same value as the default for
-<i>match_limit</i>. You can override the default by suppling <b>pcre_exec()</b>
+<i>match_limit</i>. You can override the default by supplying <b>pcre_exec()</b>
 with a <b>pcre_extra</b> block in which <i>match_limit_recursion</i> is set, and
 PCRE_EXTRA_MATCH_LIMIT_RECURSION is set in the <i>flags</i> field. If the limit
 is exceeded, <b>pcre_exec()</b> returns PCRE_ERROR_RECURSIONLIMIT.
@@ -2063,10 +2063,10 @@ lookbehind. For example, consider the pattern
 </pre>
 which finds occurrences of "iss" in the middle of words. (\B matches only if
 the current position in the subject is not a word boundary.) When applied to
-the string "Mississipi" the first call to <b>pcre_exec()</b> finds the first
+the string "Mississippi" the first call to <b>pcre_exec()</b> finds the first
 occurrence. If <b>pcre_exec()</b> is called again with just the remainder of the
-subject, namely "issipi", it does not match, because \B is always false at the
-start of the subject, which is deemed to be a word boundary. However, if
+subject, namely "issippi", it does not match, because \B is always false at
+the start of the subject, which is deemed to be a word boundary. However, if
 <b>pcre_exec()</b> is passed the entire string again, but with <i>startoffset</i>
 set to 4, it finds the second occurrence of "iss" because it is able to look
 behind the starting point to discover that it is preceded by a letter.
diff --git a/pcre/doc/html/pcrepattern.html b/pcre/doc/html/pcrepattern.html
index 96fc72986f6..2e3e6263e49 100644
--- a/pcre/doc/html/pcrepattern.html
+++ b/pcre/doc/html/pcrepattern.html
@@ -655,7 +655,7 @@ recognized.
 <P>
 It is possible to restrict \R to match only CR, LF, or CRLF (instead of the
 complete set of Unicode line endings) by setting the option PCRE_BSR_ANYCRLF
-either at compile time or when the pattern is matched. (BSR is an abbrevation
+either at compile time or when the pattern is matched. (BSR is an abbreviation
 for "backslash R".) This can be made the default when PCRE is built; if this is
 the case, the other behaviour can be requested via the PCRE_BSR_UNICODE option.
 It is also possible to specify these settings by starting a pattern string with
@@ -972,7 +972,7 @@ additional characters according to the following rules for ending a cluster:
 3. Do not break Hangul (a Korean script) syllable sequences. Hangul characters
 are of five types: L, V, T, LV, and LVT. An L character may be followed by an
 L, V, LV, or LVT character; an LV or V character may be followed by a V or T
-character; an LVT or T character may be follwed only by a T character.
+character; an LVT or T character may be followed only by a T character.
 </P>
 <P>
 4. Do not end before extending characters or spacing marks. Characters with
@@ -3080,7 +3080,7 @@ successful match. Consider:
 </pre>
 If the subject is "aaaac...", after the first match attempt fails (starting at
 the first character in the string), the starting point skips on to start the
-next attempt at "c". Note that a possessive quantifer does not have the same
+next attempt at "c". Note that a possessive quantifier does not have the same
 effect as this example; although it would suppress backtracking during the
 first match attempt, the second attempt would start at the second character
 instead of skipping on to "c".
diff --git a/pcre/doc/html/pcresyntax.html b/pcre/doc/html/pcresyntax.html
index 5896b9e0688..2946ab32872 100644
--- a/pcre/doc/html/pcresyntax.html
+++ b/pcre/doc/html/pcresyntax.html
@@ -157,7 +157,7 @@ is changed to use Unicode properties and they match many more characters.
   Xan        Alphanumeric: union of properties L and N
   Xps        POSIX space: property Z or tab, NL, VT, FF, CR
   Xsp        Perl space: property Z or tab, NL, VT, FF, CR
-  Xuc        Univerally-named character: one that can be
+  Xuc        Universally-named character: one that can be
                represented by a Universal Character Name
   Xwd        Perl word: property Xan or underscore
 </pre>
diff --git a/pcre/doc/pcre.3 b/pcre/doc/pcre.3
index 716d58044c7..afd0830fab9 100644
--- a/pcre/doc/pcre.3
+++ b/pcre/doc/pcre.3
@@ -1,16 +1,15 @@
-.TH PCRE 3 "10 February 2015" "PCRE 8.37"
+.TH PCRE 3 "14 June 2021" "PCRE 8.45"
 .SH NAME
 PCRE - Perl-compatible regular expressions (original API)
 .SH "PLEASE TAKE NOTE"
 .rs
 .sp
-This document relates to PCRE releases that use the original API,
-with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
-first release of a new API, known as PCRE2, with release numbers starting at
-10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
-libraries (now called PCRE1) are still being maintained for bug fixes, but
-there will be no new development. New projects are advised to use the new PCRE2
-libraries.
+This document relates to PCRE releases that use the original API, with library
+names libpcre, libpcre16, and libpcre32. January 2015 saw the first release of
+a new API, known as PCRE2, with release numbers starting at 10.00 and library
+names libpcre2-8, libpcre2-16, and libpcre2-32. The old libraries (now called
+PCRE1) are now at end of life, and 8.45 is the final release. New projects are
+advised to use the new PCRE2 libraries.
 .
 .
 .SH INTRODUCTION
@@ -225,6 +224,6 @@ two digits 10, at the domain cam.ac.uk.
 .rs
 .sp
 .nf
-Last updated: 10 February 2015
-Copyright (c) 1997-2015 University of Cambridge.
+Last updated: 14 June 2021
+Copyright (c) 1997-2021 University of Cambridge.
 .fi
diff --git a/pcre/doc/pcre.txt b/pcre/doc/pcre.txt
index 94f48b6aec1..f71526961f7 100644
--- a/pcre/doc/pcre.txt
+++ b/pcre/doc/pcre.txt
@@ -21,9 +21,9 @@ PLEASE TAKE NOTE
        library names libpcre, libpcre16, and libpcre32. January 2015  saw  the
        first release of a new API, known as PCRE2, with release numbers start-
        ing  at  10.00  and  library   names   libpcre2-8,   libpcre2-16,   and
-       libpcre2-32. The old libraries (now called PCRE1) are still being main-
-       tained for bug fixes,  but  there  will  be  no  new  development.  New
-       projects are advised to use the new PCRE2 libraries.
+       libpcre2-32.  The  old  libraries  (now called PCRE1) are now at end of
+       life, and 8.45 is the final release. New projects are  advised  to  use
+       the new PCRE2 libraries.
 
 
 INTRODUCTION
@@ -190,8 +190,8 @@ AUTHOR
 
 REVISION
 
-       Last updated: 10 February 2015
-       Copyright (c) 1997-2015 University of Cambridge.
+       Last updated: 14 June 2021
+       Copyright (c) 1997-2021 University of Cambridge.
 ------------------------------------------------------------------------------
 
 
@@ -3155,7 +3155,7 @@ MATCHING A PATTERN: THE TRADITIONAL FUNCTION
 
        The default value for the limit can be set when PCRE is built; the  de-
        fault  default  is  10  million, which handles all but the most extreme
-       cases. You can override the default  by  suppling  pcre_exec()  with  a
+       cases. You can override the default by  supplying  pcre_exec()  with  a
        pcre_extra   block   in   which   match_limit   is  set,  and  PCRE_EX-
        TRA_MATCH_LIMIT is set in the flags field. If the  limit  is  exceeded,
        pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
@@ -3183,7 +3183,7 @@ MATCHING A PATTERN: THE TRADITIONAL FUNCTION
 
        The default value for match_limit_recursion can be  set  when  PCRE  is
        built;  the  default  default  is  the  same  value  as the default for
-       match_limit. You can override the default by suppling pcre_exec()  with
+       match_limit. You can override the default by supplying pcre_exec() with
        a  pcre_extra block in which match_limit_recursion is set, and PCRE_EX-
        TRA_MATCH_LIMIT_RECURSION is set in the flags field. If  the  limit  is
        exceeded, pcre_exec() returns PCRE_ERROR_RECURSIONLIMIT.
@@ -3475,9 +3475,9 @@ MATCHING A PATTERN: THE TRADITIONAL FUNCTION
 
        which finds occurrences of "iss" in the middle of  words.  (\B  matches
        only  if  the  current position in the subject is not a word boundary.)
-       When applied to the string "Mississipi" the first call  to  pcre_exec()
+       When applied to the string "Mississippi" the first call to  pcre_exec()
        finds  the  first  occurrence. If pcre_exec() is called again with just
-       the remainder of the subject, namely "issipi", it does not  match,  be-
+       the remainder of the subject, namely "issippi", it does not match,  be-
        cause  \B  is always false at the start of the subject, which is deemed
        to be a word boundary. However, if pcre_exec()  is  passed  the  entire
        string again, but with startoffset set to 4, it finds the second occur-
@@ -5292,11 +5292,11 @@ BACKSLASH
        It is possible to restrict \R to match only CR, LF, or CRLF (instead of
        the  complete  set  of  Unicode  line  endings)  by  setting the option
        PCRE_BSR_ANYCRLF either at compile time or when the pattern is matched.
-       (BSR is an abbrevation for "backslash R".) This can be made the default
-       when PCRE is built; if this is the case, the other behaviour can be re-
-       quested  via the PCRE_BSR_UNICODE option.  It is also possible to spec-
-       ify these settings by starting a pattern string with one of the follow-
-       ing sequences:
+       (BSR  is  an  abbreviation for "backslash R".) This can be made the de-
+       fault when PCRE is built; if this is the case, the other behaviour  can
+       be  requested  via the PCRE_BSR_UNICODE option.  It is also possible to
+       specify these settings by starting a pattern string  with  one  of  the
+       following sequences:
 
          (*BSR_ANYCRLF)   CR, LF, or CRLF only
          (*BSR_UNICODE)   any Unicode newline sequence
@@ -5488,8 +5488,8 @@ BACKSLASH
        3.  Do  not  break  Hangul (a Korean script) syllable sequences. Hangul
        characters are of five types: L, V, T, LV, and LVT. An L character  may
        be  followed by an L, V, LV, or LVT character; an LV or V character may
-       be followed by a V or T character; an LVT or T character may be follwed
-       only by a T character.
+       be followed by a V or T character; an LVT or T character  may  be  fol-
+       lowed only by a T character.
 
        4.  Do not end before extending characters or spacing marks. Characters
        with the "mark" property always have  the  "extend"  grapheme  breaking
@@ -7494,7 +7494,7 @@ BACKTRACKING CONTROL
        If  the  subject  is  "aaaac...",  after  the first match attempt fails
        (starting at the first character in the  string),  the  starting  point
        skips on to start the next attempt at "c". Note that a possessive quan-
-       tifer does not have the same effect as this example; although it  would
+       tifier does not have the same effect as this example; although it would
        suppress  backtracking  during  the first match attempt, the second at-
        tempt would start at the second character instead  of  skipping  on  to
        "c".
@@ -7793,7 +7793,7 @@ PCRE SPECIAL CATEGORY PROPERTIES FOR \p and \P
          Xan        Alphanumeric: union of properties L and N
          Xps        POSIX space: property Z or tab, NL, VT, FF, CR
          Xsp        Perl space: property Z or tab, NL, VT, FF, CR
-         Xuc        Univerally-named character: one that can be
+         Xuc        Universally-named character: one that can be
                       represented by a Universal Character Name
          Xwd        Perl word: property Xan or underscore
 
diff --git a/pcre/doc/pcreapi.3 b/pcre/doc/pcreapi.3
index d79217818a6..685672a3cef 100644
--- a/pcre/doc/pcreapi.3
+++ b/pcre/doc/pcreapi.3
@@ -1699,7 +1699,7 @@ very long time, and so the \fImatch_limit\fP value is also used in this case
 .P
 The default value for the limit can be set when PCRE is built; the default
 default is 10 million, which handles all but the most extreme cases. You can
-override the default by suppling \fBpcre_exec()\fP with a \fBpcre_extra\fP
+override the default by supplying \fBpcre_exec()\fP with a \fBpcre_extra\fP
 block in which \fImatch_limit\fP is set, and PCRE_EXTRA_MATCH_LIMIT is set in
 the \fIflags\fP field. If the limit is exceeded, \fBpcre_exec()\fP returns
 PCRE_ERROR_MATCHLIMIT.
@@ -1726,7 +1726,7 @@ and is ignored, when matching is done using JIT compiled code.
 .P
 The default value for \fImatch_limit_recursion\fP can be set when PCRE is
 built; the default default is the same value as the default for
-\fImatch_limit\fP. You can override the default by suppling \fBpcre_exec()\fP
+\fImatch_limit\fP. You can override the default by supplying \fBpcre_exec()\fP
 with a \fBpcre_extra\fP block in which \fImatch_limit_recursion\fP is set, and
 PCRE_EXTRA_MATCH_LIMIT_RECURSION is set in the \fIflags\fP field. If the limit
 is exceeded, \fBpcre_exec()\fP returns PCRE_ERROR_RECURSIONLIMIT.
@@ -2044,10 +2044,10 @@ lookbehind. For example, consider the pattern
 .sp
 which finds occurrences of "iss" in the middle of words. (\eB matches only if
 the current position in the subject is not a word boundary.) When applied to
-the string "Mississipi" the first call to \fBpcre_exec()\fP finds the first
+the string "Mississippi" the first call to \fBpcre_exec()\fP finds the first
 occurrence. If \fBpcre_exec()\fP is called again with just the remainder of the
-subject, namely "issipi", it does not match, because \eB is always false at the
-start of the subject, which is deemed to be a word boundary. However, if
+subject, namely "issippi", it does not match, because \eB is always false at
+the start of the subject, which is deemed to be a word boundary. However, if
 \fBpcre_exec()\fP is passed the entire string again, but with \fIstartoffset\fP
 set to 4, it finds the second occurrence of "iss" because it is able to look
 behind the starting point to discover that it is preceded by a letter.
diff --git a/pcre/doc/pcrepattern.3 b/pcre/doc/pcrepattern.3
index 97df217fdb2..2f501a6503b 100644
--- a/pcre/doc/pcrepattern.3
+++ b/pcre/doc/pcrepattern.3
@@ -656,7 +656,7 @@ recognized.
 .P
 It is possible to restrict \eR to match only CR, LF, or CRLF (instead of the
 complete set of Unicode line endings) by setting the option PCRE_BSR_ANYCRLF
-either at compile time or when the pattern is matched. (BSR is an abbrevation
+either at compile time or when the pattern is matched. (BSR is an abbreviation
 for "backslash R".) This can be made the default when PCRE is built; if this is
 the case, the other behaviour can be requested via the PCRE_BSR_UNICODE option.
 It is also possible to specify these settings by starting a pattern string with
@@ -968,7 +968,7 @@ additional characters according to the following rules for ending a cluster:
 3. Do not break Hangul (a Korean script) syllable sequences. Hangul characters
 are of five types: L, V, T, LV, and LVT. An L character may be followed by an
 L, V, LV, or LVT character; an LV or V character may be followed by a V or T
-character; an LVT or T character may be follwed only by a T character.
+character; an LVT or T character may be followed only by a T character.
 .P
 4. Do not end before extending characters or spacing marks. Characters with
 the "mark" property always have the "extend" grapheme breaking property.
@@ -3115,7 +3115,7 @@ successful match. Consider:
 .sp
 If the subject is "aaaac...", after the first match attempt fails (starting at
 the first character in the string), the starting point skips on to start the
-next attempt at "c". Note that a possessive quantifer does not have the same
+next attempt at "c". Note that a possessive quantifier does not have the same
 effect as this example; although it would suppress backtracking during the
 first match attempt, the second attempt would start at the second character
 instead of skipping on to "c".
diff --git a/pcre/doc/pcresyntax.3 b/pcre/doc/pcresyntax.3
index 0850369f7aa..b77a8664ed9 100644
--- a/pcre/doc/pcresyntax.3
+++ b/pcre/doc/pcresyntax.3
@@ -123,7 +123,7 @@ is changed to use Unicode properties and they match many more characters.
   Xan        Alphanumeric: union of properties L and N
   Xps        POSIX space: property Z or tab, NL, VT, FF, CR
   Xsp        Perl space: property Z or tab, NL, VT, FF, CR
-  Xuc        Univerally-named character: one that can be
+  Xuc        Universally-named character: one that can be
                represented by a Universal Character Name
   Xwd        Perl word: property Xan or underscore
 .sp
diff --git a/pcre/pcre_compile.c b/pcre/pcre_compile.c
index 7441c404735..5a9a2d38ddc 100644
--- a/pcre/pcre_compile.c
+++ b/pcre/pcre_compile.c
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2020 University of Cambridge
+           Copyright (c) 1997-2021 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -9102,6 +9102,8 @@ pcre_uchar cworkspace[COMPILE_WORK_SIZE];
 similar way to cworkspace, it can be expanded using malloc() if necessary. */
 
 named_group named_groups[NAMED_GROUP_LIST_SIZE];
+cd->named_groups = named_groups;
+cd->named_group_list_size = NAMED_GROUP_LIST_SIZE;
 
 /* Set this early so that early errors get offset 0. */
 
@@ -9375,8 +9377,6 @@ cd->hwm = cworkspace;
 cd->iscondassert = FALSE;
 cd->start_workspace = cworkspace;
 cd->workspace_size = COMPILE_WORK_SIZE;
-cd->named_groups = named_groups;
-cd->named_group_list_size = NAMED_GROUP_LIST_SIZE;
 cd->start_pattern = (const pcre_uchar *)pattern;
 cd->end_pattern = (const pcre_uchar *)(pattern + STRLEN_UC((const pcre_uchar *)pattern));
 cd->req_varyopt = 0;
@@ -9487,6 +9487,7 @@ if (cd->names_found > 0)
     add_name(cd, ng->name, ng->length, ng->number);
   if (cd->named_group_list_size > NAMED_GROUP_LIST_SIZE)
     (PUBL(free))((void *)cd->named_groups);
+  cd->named_group_list_size = 0;   /* So we don't free it twice */
   }
 
 /* Set up a starting, non-extracting bracket, then compile the expression. On
@@ -9637,6 +9638,8 @@ if (errorcode != 0)
   {
   (PUBL(free))(re);
   PCRE_EARLY_ERROR_RETURN:
+  if (cd->named_group_list_size > NAMED_GROUP_LIST_SIZE)
+    (PUBL(free))((void *)cd->named_groups);
   *erroroffset = (int)(ptr - (const pcre_uchar *)pattern);
   PCRE_EARLY_ERROR_RETURN2:
   *errorptr = find_error_text(errorcode);
diff --git a/pcre/pcre_exec.c b/pcre/pcre_exec.c
index 88a9a79e489..c30d90acfc7 100644
--- a/pcre/pcre_exec.c
+++ b/pcre/pcre_exec.c
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2018 University of Cambridge
+           Copyright (c) 1997-2021 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -764,7 +764,7 @@ for (;;)
     md->mark = NULL;    /* In case previously set by assertion */
     RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode] + ecode[1], offset_top, md,
       eptrb, RM55);
-    if ((rrc == MATCH_MATCH || rrc == MATCH_ACCEPT) &&
+    if ((rrc == MATCH_MATCH || rrc == MATCH_ACCEPT || rrc == MATCH_KETRPOS) &&
          md->mark == NULL) md->mark = ecode + 2;
 
     /* A return of MATCH_SKIP_ARG means that matching failed at SKIP with an
diff --git a/pcre/testdata/testinput1 b/pcre/testdata/testinput1
index 02e4f4825fc..54bc79c6271 100644
--- a/pcre/testdata/testinput1
+++ b/pcre/testdata/testinput1
@@ -5757,4 +5757,7 @@ AbcdCBefgBhiBqz
 /(?&word)*  \. (?<word> \w+ )/xi
     pokus.hokus
 
+/(?:A(*:X))*+/K
+    A
+
 /-- End of testinput1 --/
diff --git a/pcre/testdata/testoutput1 b/pcre/testdata/testoutput1
index e6147e60b95..212dafaae58 100644
--- a/pcre/testdata/testoutput1
+++ b/pcre/testdata/testoutput1
@@ -9470,4 +9470,9 @@ No match
  0: pokus.hokus
  1: hokus
 
+/(?:A(*:X))*+/K
+    A
+ 0: A
+MK: X
+
 /-- End of testinput1 --/