Merge branch '10.1' into 10.2

19 files changed, 638 insertions, 337 deletions

diff --git a/pcre/AUTHORS b/pcre/AUTHORS
index 291657caef1..eb9b1a44b34 100644
--- a/pcre/AUTHORS
+++ b/pcre/AUTHORS
@@ -8,7 +8,7 @@ Email domain:     cam.ac.uk
 University of Cambridge Computing Service,
 Cambridge, England.
 
-Copyright (c) 1997-2017 University of Cambridge
+Copyright (c) 1997-2018 University of Cambridge
 All rights reserved
 
 
@@ -19,7 +19,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2010-2017 Zoltan Herczeg
+Copyright(c) 2010-2018 Zoltan Herczeg
 All rights reserved.
 
 
@@ -30,7 +30,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2009-2017 Zoltan Herczeg
+Copyright(c) 2009-2018 Zoltan Herczeg
 All rights reserved.
 
 
diff --git a/pcre/ChangeLog b/pcre/ChangeLog
index 590a7542885..7b53195f6a6 100644
--- a/pcre/ChangeLog
+++ b/pcre/ChangeLog
@@ -4,6 +4,59 @@ ChangeLog for PCRE
 Note that the PCRE 8.xx series (PCRE1) is now in a bugfix-only state. All
 development is happening in the PCRE2 10.xx series.
 
+
+Version 8.42 20-March-2018
+--------------------------
+
+1.  Fixed a MIPS issue in the JIT compiler reported by Joshua Kinard.
+
+2.  Fixed outdated real_pcre definitions in pcre.h.in (patch by Evgeny Kotkov).
+
+3.  pcregrep was truncating components of file names to 128 characters when
+processing files with the -r option, and also (some very odd code) truncating
+path names to 512 characters. There is now a check on the absolute length of
+full path file names, which may be up to 2047 characters long.
+
+4.  Using pcre_dfa_exec(), in UTF mode when UCP support was not defined, there
+was the possibility of a false positive match when caselessly matching a "not
+this character" item such as [^\x{1234}] (with a code point greater than 127)
+because the "other case" variable was not being initialized.
+
+5. Although pcre_jit_exec checks whether the pattern is compiled
+in a given mode, it was also expected that at least one mode is available.
+This is fixed and pcre_jit_exec returns with PCRE_ERROR_JIT_BADOPTION
+when the pattern is not optimized by JIT at all.
+
+6. The line number and related variables such as match counts in pcregrep
+were all int variables, causing overflow when files with more than 2147483647
+lines were processed (assuming 32-bit ints). They have all been changed to
+unsigned long ints.
+
+7. If a backreference with a minimum repeat count of zero was first in a
+pattern, apart from assertions, an incorrect first matching character could be
+recorded. For example, for the pattern /(?=(a))\1?b/, "b" was incorrectly set
+as the first character of a match.
+
+8. Fix out-of-bounds read for partial matching of /./ against an empty string
+when the newline type is CRLF.
+
+9. When matching using the the REG_STARTEND feature of the POSIX API with a
+non-zero starting offset, unset capturing groups with lower numbers than a
+group that did capture something were not being correctly returned as "unset"
+(that is, with offset values of -1).
+
+10. Matching the pattern /(*UTF)\C[^\v]+\x80/ against an 8-bit string
+containing multi-code-unit characters caused bad behaviour and possibly a
+crash. This issue was fixed for other kinds of repeat in release 8.37 by change
+38, but repeating character classes were overlooked.
+
+11. A small fix to pcregrep to avoid compiler warnings for -Wformat-overflow=2.
+
+12. Added --enable-jit=auto support to configure.ac.
+
+13. Fix misleading error message in configure.ac.
+
+
 Version 8.41 05-July-2017
 -------------------------
 
diff --git a/pcre/INSTALL b/pcre/INSTALL
index 2099840756e..8865734f81b 100644
--- a/pcre/INSTALL
+++ b/pcre/INSTALL
@@ -1,8 +1,8 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
+   Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
+Foundation, Inc.
 
    Copying and distribution of this file, with or without modification,
 are permitted in any medium without royalty provided the copyright
@@ -12,97 +12,96 @@ without warranty of any kind.
 Basic Installation
 ==================
 
-   Briefly, the shell command `./configure && make && make install'
+   Briefly, the shell command './configure && make && make install'
 should configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
+more-detailed instructions are generic; see the 'README' file for
 instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
+'INSTALL' file but do not implement all of the features documented
 below.  The lack of an optional feature in a given package is not
 necessarily a bug.  More recommendations for GNU packages can be found
 in *note Makefile Conventions: (standards)Makefile Conventions.
 
-   The `configure' shell script attempts to guess correct values for
+   The 'configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
+those values to create a 'Makefile' in each directory of the package.
+It may also create one or more '.h' files containing system-dependent
+definitions.  Finally, it creates a shell script 'config.status' that
 you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
+file 'config.log' containing compiler output (useful mainly for
+debugging 'configure').
 
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
+   It can also use an optional file (typically called 'config.cache' and
+enabled with '--cache-file=config.cache' or simply '-C') that saves the
+results of its tests to speed up reconfiguring.  Caching is disabled by
+default to prevent problems with accidental use of stale cache files.
 
    If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
+to figure out how 'configure' could check whether to do them, and mail
+diffs or instructions to the address given in the 'README' so they can
 be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
+some point 'config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+   The file 'configure.ac' (or 'configure.in') is used to create
+'configure' by a program called 'autoconf'.  You need 'configure.ac' if
+you want to change it or regenerate 'configure' using a newer version of
+'autoconf'.
 
    The simplest way to compile this package is:
 
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
+  1. 'cd' to the directory containing the package's source code and type
+     './configure' to configure the package for your system.
 
-     Running `configure' might take a while.  While running, it prints
+     Running 'configure' might take a while.  While running, it prints
      some messages telling which features it is checking for.
 
-  2. Type `make' to compile the package.
+  2. Type 'make' to compile the package.
 
-  3. Optionally, type `make check' to run any self-tests that come with
+  3. Optionally, type 'make check' to run any self-tests that come with
      the package, generally using the just-built uninstalled binaries.
 
-  4. Type `make install' to install the programs and any data files and
+  4. Type 'make install' to install the programs and any data files and
      documentation.  When installing into a prefix owned by root, it is
      recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
+     user, and only the 'make install' phase executed with root
      privileges.
 
-  5. Optionally, type `make installcheck' to repeat any self-tests, but
+  5. Optionally, type 'make installcheck' to repeat any self-tests, but
      this time using the binaries in their final installed location.
      This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
+     regular user, particularly if the prior 'make install' required
      root privileges, verifies that the installation completed
      correctly.
 
   6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
+     source code directory by typing 'make clean'.  To also remove the
+     files that 'configure' created (so you can compile the package for
+     a different kind of computer), type 'make distclean'.  There is
+     also a 'make maintainer-clean' target, but that is intended mainly
      for the package's developers.  If you use it, you may have to get
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
-  7. Often, you can also type `make uninstall' to remove the installed
+  7. Often, you can also type 'make uninstall' to remove the installed
      files again.  In practice, not all packages have tested that
      uninstallation works correctly, even though it is required by the
      GNU Coding Standards.
 
-  8. Some packages, particularly those that use Automake, provide `make
+  8. Some packages, particularly those that use Automake, provide 'make
      distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
+     targets like 'make install' and 'make uninstall' work correctly.
      This target is generally not run by end users.
 
 Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
+the 'configure' script does not know about.  Run './configure --help'
 for details on some of the pertinent environment variables.
 
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
+   You can give 'configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here is
+an example:
 
      ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
@@ -113,21 +112,21 @@ Compiling For Multiple Architectures
 
    You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU 'make'.  'cd' to the
 directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
+the 'configure' script.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.  This is known
+as a "VPATH" build.
 
-   With a non-GNU `make', it is safer to compile the package for one
+   With a non-GNU 'make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
+installed the package for one architecture, use 'make distclean' before
 reconfiguring for another architecture.
 
    On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
+"universal" binaries--by specifying multiple '-arch' options to the
+compiler but only a single '-arch' option to the preprocessor.  Like
 this:
 
      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
@@ -136,105 +135,104 @@ this:
 
    This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+using the 'lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
+   By default, 'make install' installs the package's commands under
+'/usr/local/bin', include files under '/usr/local/include', etc.  You
+can specify an installation prefix other than '/usr/local' by giving
+'configure' the option '--prefix=PREFIX', where PREFIX must be an
 absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
 PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
+options like '--bindir=DIR' to specify different values for particular
+kinds of files.  Run 'configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the default
+for these options is expressed in terms of '${prefix}', so that
+specifying just '--prefix' will affect all of the other directory
 specifications that were not explicitly provided.
 
    The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
+correct locations to 'configure'; however, many packages provide one or
 both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
+'make install' command line to change installation locations without
 having to reconfigure or recompile.
 
    The first method involves providing an override variable for each
-affected directory.  For example, `make install
+affected directory.  For example, 'make install
 prefix=/alternate/directory' will choose an alternate location for all
 directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
+'${prefix}'.  Any directories that were specified during 'configure',
+but not in terms of '${prefix}', must each be overridden at install time
+for the entire installation to be relocated.  The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation.  However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the 'DESTDIR' variable.  For
+example, 'make install DESTDIR=/alternate/directory' will prepend
+'/alternate/directory' before all installation names.  The approach of
+'DESTDIR' overrides is not required by the GNU Coding Standards, and
 does not work on platforms that have drive letters.  On the other hand,
 it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
+when some directory options were not specified in terms of '${prefix}'
+at 'configure' time.
 
 Optional Features
 =================
 
    If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
+with an extra prefix or suffix on their names by giving 'configure' the
+option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
+
+   Some packages pay attention to '--enable-FEATURE' options to
+'configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+is something like 'gnu-as' or 'x' (for the X Window System).  The
+'README' should mention any '--enable-' and '--with-' options that the
 package recognizes.
 
-   For packages that use the X Window System, `configure' can usually
+   For packages that use the X Window System, 'configure' can usually
 find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
+you can use the 'configure' options '--x-includes=DIR' and
+'--x-libraries=DIR' to specify their locations.
 
    Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
+execution of 'make' will be.  For these packages, running './configure
 --enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
+overridden with 'make V=1'; while running './configure
 --disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
+overridden with 'make V=0'.
 
 Particular systems
 ==================
 
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
+is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
 
      ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
 
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
 
-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
+   HP-UX 'make' updates targets which have the same time stamps as their
+prerequisites, which makes it generally unusable when shipped generated
+files such as 'configure' are involved.  Use GNU 'make' instead.
 
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
+parse its '<wchar.h>' header file.  The option '-nodtk' can be used as a
+workaround.  If GNU CC is not installed, it is therefore recommended to
+try
 
      ./configure CC="cc"
 
@@ -242,26 +240,26 @@ and if that doesn't work, try
 
      ./configure CC="cc -nodtk"
 
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+   On Solaris, don't put '/usr/ucb' early in your 'PATH'.  This
 directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
+these programs are available in '/usr/bin'.  So, if you need '/usr/ucb'
+in your 'PATH', put it _after_ '/usr/bin'.
 
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
+   On Haiku, software installed for all users goes in '/boot/common',
+not '/usr/local'.  It is recommended to use the following options:
 
      ./configure --prefix=/boot/common
 
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
+   There may be some features 'configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
+_same_ architectures, 'configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
+'--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as 'sun4', or a canonical name which has the form:
 
      CPU-COMPANY-SYSTEM
 
@@ -270,101 +268,101 @@ where SYSTEM can have one of these forms:
      OS
      KERNEL-OS
 
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
+   See the file 'config.sub' for the possible values of each field.  If
+'config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the option '--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the
 "host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+eventually be run) with '--host=TYPE'.
 
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+   If you want to set default values for 'configure' scripts to share,
+you can create a site shell script called 'config.site' that gives
+default values for variables like 'CC', 'cache_file', and 'prefix'.
+'configure' looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all 'configure' scripts look for a site script.
 
 Defining Variables
 ==================
 
    Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
+environment passed to 'configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
+them in the 'configure' command line, using 'VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-causes the specified `gcc' to be used as the C compiler (unless it is
+causes the specified 'gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation.  Until the limitation is lifted, you can use
-this workaround:
+Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Autoconf limitation.  Until the limitation is lifted, you can use this
+workaround:
 
      CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
 
-`configure' Invocation
+'configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
+   'configure' recognizes the following options to control how it
 operates.
 
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
+'--help'
+'-h'
+     Print a summary of all of the options to 'configure', and exit.
 
-`--help=short'
-`--help=recursive'
+'--help=short'
+'--help=recursive'
      Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
+     'configure', and exit.  The 'short' variant lists options used only
+     in the top level, while the 'recursive' variant lists options also
+     present in any nested packages.
 
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
+'--version'
+'-V'
+     Print the version of Autoconf used to generate the 'configure'
      script, and exit.
 
-`--cache-file=FILE'
+'--cache-file=FILE'
      Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     traditionally 'config.cache'.  FILE defaults to '/dev/null' to
      disable caching.
 
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
+'--config-cache'
+'-C'
+     Alias for '--cache-file=config.cache'.
 
-`--quiet'
-`--silent'
-`-q'
+'--quiet'
+'--silent'
+'-q'
      Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
+     suppress all normal output, redirect it to '/dev/null' (any error
      messages will still be shown).
 
-`--srcdir=DIR'
+'--srcdir=DIR'
      Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
+     'configure' can determine that directory automatically.
 
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
+'--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names:: for
+     more details, including other options available for fine-tuning the
+     installation locations.
 
-`--no-create'
-`-n'
+'--no-create'
+'-n'
      Run the configure checks, but stop before creating any output
      files.
 
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
+'configure' also accepts some other, not widely useful, options.  Run
+'configure --help' for more details.
diff --git a/pcre/LICENCE b/pcre/LICENCE
index dd9071a8dd8..f6ef7fd7664 100644
--- a/pcre/LICENCE
+++ b/pcre/LICENCE
@@ -25,7 +25,7 @@ Email domain:     cam.ac.uk
 University of Cambridge Computing Service,
 Cambridge, England.
 
-Copyright (c) 1997-2017 University of Cambridge
+Copyright (c) 1997-2018 University of Cambridge
 All rights reserved.
 
 
@@ -36,7 +36,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2010-2017 Zoltan Herczeg
+Copyright(c) 2010-2018 Zoltan Herczeg
 All rights reserved.
 
 
@@ -47,7 +47,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2009-2017 Zoltan Herczeg
+Copyright(c) 2009-2018 Zoltan Herczeg
 All rights reserved.
 
 
diff --git a/pcre/NEWS b/pcre/NEWS
index 36be07cb880..09b4ad36003 100644
--- a/pcre/NEWS
+++ b/pcre/NEWS
@@ -1,6 +1,12 @@
 News about PCRE releases
 ------------------------
 
+Release 8.42 20-March-2018
+--------------------------
+
+This is a bug-fix release.
+
+
 Release 8.41 13-June-2017
 -------------------------
 
diff --git a/pcre/NON-AUTOTOOLS-BUILD b/pcre/NON-AUTOTOOLS-BUILD
index 3910059106b..37f6164475b 100644
--- a/pcre/NON-AUTOTOOLS-BUILD
+++ b/pcre/NON-AUTOTOOLS-BUILD
@@ -760,13 +760,14 @@ The character code used is EBCDIC, not ASCII or Unicode. In z/OS, UNIX APIs and
 applications can be supported through UNIX System Services, and in such an
 environment PCRE can be built in the same way as in other systems. However, in
 native z/OS (without UNIX System Services) and in z/VM, special ports are
-required. For details, please see this web site:
+required. PCRE1 version 8.39 is available in file 882 on this site:
 
-  http://www.zaconsultants.net
+  http://www.cbttape.org
 
-You may download PCRE from WWW.CBTTAPE.ORG, file 882.  Everything, source and
-executable, is in EBCDIC and native z/OS file formats and this is the
-recommended download site.
+Everything, source and executable, is in EBCDIC and native z/OS file formats.
+However, this software is not maintained and will not be upgraded. If you are
+new to PCRE you should be looking at PCRE2 (version 10.30 or later).
 
-==========================
-Last Updated: 25 June 2015
+===============================
+Last Updated: 13 September 2017
+===============================
diff --git a/pcre/configure.ac b/pcre/configure.ac
index 718a18508c9..dcdef6a9427 100644
--- a/pcre/configure.ac
+++ b/pcre/configure.ac
@@ -9,18 +9,18 @@ dnl The PCRE_PRERELEASE feature is for identifying release candidates. It might
 dnl be defined as -RC2, for example. For real releases, it should be empty.
 
 m4_define(pcre_major, [8])
-m4_define(pcre_minor, [41])
+m4_define(pcre_minor, [42])
 m4_define(pcre_prerelease, [])
-m4_define(pcre_date, [2017-07-05])
+m4_define(pcre_date, [2018-03-20])
 
 # NOTE: The CMakeLists.txt file searches for the above variables in the first
 # 50 lines of this file. Please update that if the variables above are moved.
 
 # Libtool shared library interface versions (current:revision:age)
-m4_define(libpcre_version, [3:9:2])
-m4_define(libpcre16_version, [2:9:2])
-m4_define(libpcre32_version, [0:9:0])
-m4_define(libpcreposix_version, [0:5:0])
+m4_define(libpcre_version, [3:10:2])
+m4_define(libpcre16_version, [2:10:2])
+m4_define(libpcre32_version, [0:10:0])
+m4_define(libpcreposix_version, [0:6:0])
 m4_define(libpcrecpp_version, [0:1:0])
 
 AC_PREREQ(2.57)
@@ -155,6 +155,18 @@ AC_ARG_ENABLE(jit,
                              [enable Just-In-Time compiling support]),
               , enable_jit=no)
 
+# This code enables JIT if the hardware supports it.
+
+if test "$enable_jit" = "auto"; then
+  AC_LANG(C)
+  AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+  #define SLJIT_CONFIG_AUTO 1
+  #include "sljit/sljitConfigInternal.h"
+  #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
+  #error unsupported
+  #endif]])], enable_jit=yes, enable_jit=no)
+fi
+
 # Handle --disable-pcregrep-jit (enabled by default)
 AC_ARG_ENABLE(pcregrep-jit,
               AS_HELP_STRING([--disable-pcregrep-jit],
@@ -469,7 +481,7 @@ pcre_have_type_traits="0"
 pcre_have_bits_type_traits="0"
 
 if test "x$enable_cpp" = "xyes" -a -z "$CXX"; then
-   AC_MSG_ERROR([You need a C++ compiler for C++ support.])
+   AC_MSG_ERROR([Invalid C++ compiler or C++ compiler flags])
 fi
 
 if test "x$enable_cpp" = "xyes" -a -n "$CXX"
diff --git a/pcre/doc/html/NON-AUTOTOOLS-BUILD.txt b/pcre/doc/html/NON-AUTOTOOLS-BUILD.txt
index 3910059106b..37f6164475b 100644
--- a/pcre/doc/html/NON-AUTOTOOLS-BUILD.txt
+++ b/pcre/doc/html/NON-AUTOTOOLS-BUILD.txt
@@ -760,13 +760,14 @@ The character code used is EBCDIC, not ASCII or Unicode. In z/OS, UNIX APIs and
 applications can be supported through UNIX System Services, and in such an
 environment PCRE can be built in the same way as in other systems. However, in
 native z/OS (without UNIX System Services) and in z/VM, special ports are
-required. For details, please see this web site:
+required. PCRE1 version 8.39 is available in file 882 on this site:
 
-  http://www.zaconsultants.net
+  http://www.cbttape.org
 
-You may download PCRE from WWW.CBTTAPE.ORG, file 882.  Everything, source and
-executable, is in EBCDIC and native z/OS file formats and this is the
-recommended download site.
+Everything, source and executable, is in EBCDIC and native z/OS file formats.
+However, this software is not maintained and will not be upgraded. If you are
+new to PCRE you should be looking at PCRE2 (version 10.30 or later).
 
-==========================
-Last Updated: 25 June 2015
+===============================
+Last Updated: 13 September 2017
+===============================
diff --git a/pcre/pcre.h.in b/pcre/pcre.h.in
index 667a45ed575..d4d78926984 100644
--- a/pcre/pcre.h.in
+++ b/pcre/pcre.h.in
@@ -321,11 +321,11 @@ these bits, just add new ones on the end, in order to remain compatible. */
 
 /* Types */
 
-struct real_pcre;                 /* declaration; the definition is private  */
-typedef struct real_pcre pcre;
+struct real_pcre8_or_16;          /* declaration; the definition is private  */
+typedef struct real_pcre8_or_16 pcre;
 
-struct real_pcre16;               /* declaration; the definition is private  */
-typedef struct real_pcre16 pcre16;
+struct real_pcre8_or_16;          /* declaration; the definition is private  */
+typedef struct real_pcre8_or_16 pcre16;
 
 struct real_pcre32;               /* declaration; the definition is private  */
 typedef struct real_pcre32 pcre32;
diff --git a/pcre/pcre_compile.c b/pcre/pcre_compile.c
index 1a916693e69..9b9da46f0d0 100644
--- a/pcre/pcre_compile.c
+++ b/pcre/pcre_compile.c
@@ -8063,7 +8063,7 @@ for (;; ptr++)
         single group (i.e. not to a duplicated name. */
 
         HANDLE_REFERENCE:
-        if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
+        if (firstcharflags == REQ_UNSET) zerofirstcharflags = firstcharflags = REQ_NONE;
         previous = code;
         item_hwm_offset = cd->hwm - cd->start_workspace;
         *code++ = ((options & PCRE_CASELESS) != 0)? OP_REFI : OP_REF;
diff --git a/pcre/pcre_dfa_exec.c b/pcre/pcre_dfa_exec.c
index bc09ced3a7c..f333381d088 100644
--- a/pcre/pcre_dfa_exec.c
+++ b/pcre/pcre_dfa_exec.c
@@ -2287,12 +2287,14 @@ for (;;)
       case OP_NOTI:
       if (clen > 0)
         {
-        unsigned int otherd;
+        pcre_uint32 otherd;
 #ifdef SUPPORT_UTF
         if (utf && d >= 128)
           {
 #ifdef SUPPORT_UCP
           otherd = UCD_OTHERCASE(d);
+#else
+          otherd = d;
 #endif  /* SUPPORT_UCP */
           }
         else
diff --git a/pcre/pcre_exec.c b/pcre/pcre_exec.c
index fa84d924a4c..93256d32455 100644
--- a/pcre/pcre_exec.c
+++ b/pcre/pcre_exec.c
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2014 University of Cambridge
+           Copyright (c) 1997-2018 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -2313,7 +2313,7 @@ for (;;)
     case OP_ANY:
     if (IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH);
     if (md->partial != 0 &&
-        eptr + 1 >= md->end_subject &&
+        eptr == md->end_subject - 1 &&
         NLBLOCK->nltype == NLTYPE_FIXED &&
         NLBLOCK->nllen == 2 &&
         UCHAR21TEST(eptr) == NLBLOCK->nl[0])
@@ -3061,7 +3061,7 @@ for (;;)
             {
             RMATCH(eptr, ecode, offset_top, md, eptrb, RM18);
             if (rrc != MATCH_NOMATCH) RRETURN(rrc);
-            if (eptr-- == pp) break;        /* Stop if tried at original pos */
+            if (eptr-- <= pp) break;        /* Stop if tried at original pos */
             BACKCHAR(eptr);
             }
           }
@@ -3218,7 +3218,7 @@ for (;;)
           {
           RMATCH(eptr, ecode, offset_top, md, eptrb, RM21);
           if (rrc != MATCH_NOMATCH) RRETURN(rrc);
-          if (eptr-- == pp) break;        /* Stop if tried at original pos */
+          if (eptr-- <= pp) break;        /* Stop if tried at original pos */
 #ifdef SUPPORT_UTF
           if (utf) BACKCHAR(eptr);
 #endif
diff --git a/pcre/pcre_jit_compile.c b/pcre/pcre_jit_compile.c
index 249edbe8e7f..2bad74b0231 100644
--- a/pcre/pcre_jit_compile.c
+++ b/pcre/pcre_jit_compile.c
@@ -164,7 +164,6 @@ typedef struct jit_arguments {
   const pcre_uchar *begin;
   const pcre_uchar *end;
   int *offsets;
-  pcre_uchar *uchar_ptr;
   pcre_uchar *mark_ptr;
   void *callout_data;
   /* Everything else after. */
@@ -214,7 +213,7 @@ enum control_types {
   type_then_trap = 1
 };
 
-typedef int (SLJIT_CALL *jit_function)(jit_arguments *args);
+typedef int (SLJIT_FUNC *jit_function)(jit_arguments *args);
 
 /* The following structure is the key data type for the recursive
 code generator. It is allocated by compile_matchingpath, and contains
@@ -489,9 +488,24 @@ typedef struct compare_context {
 /* Used for accessing the elements of the stack. */
 #define STACK(i)      ((i) * (int)sizeof(sljit_sw))
 
+#ifdef SLJIT_PREF_SHIFT_REG
+#if SLJIT_PREF_SHIFT_REG == SLJIT_R2
+/* Nothing. */
+#elif SLJIT_PREF_SHIFT_REG == SLJIT_R3
+#define SHIFT_REG_IS_R3
+#else
+#error "Unsupported shift register"
+#endif
+#endif
+
 #define TMP1          SLJIT_R0
+#ifdef SHIFT_REG_IS_R3
+#define TMP2          SLJIT_R3
+#define TMP3          SLJIT_R2
+#else
 #define TMP2          SLJIT_R2
 #define TMP3          SLJIT_R3
+#endif
 #define STR_PTR       SLJIT_S0
 #define STR_END       SLJIT_S1
 #define STACK_TOP     SLJIT_R1
@@ -520,13 +534,10 @@ the start pointers when the end of the capturing group has not yet reached. */
 
 #if defined COMPILE_PCRE8
 #define MOV_UCHAR  SLJIT_MOV_U8
-#define MOVU_UCHAR SLJIT_MOVU_U8
 #elif defined COMPILE_PCRE16
 #define MOV_UCHAR  SLJIT_MOV_U16
-#define MOVU_UCHAR SLJIT_MOVU_U16
 #elif defined COMPILE_PCRE32
 #define MOV_UCHAR  SLJIT_MOV_U32
-#define MOVU_UCHAR SLJIT_MOVU_U32
 #else
 #error Unsupported compiling mode
 #endif
@@ -2383,12 +2394,25 @@ if (length < 8)
   }
 else
   {
-  GET_LOCAL_BASE(SLJIT_R1, 0, OVECTOR_START);
-  OP1(SLJIT_MOV, SLJIT_R2, 0, SLJIT_IMM, length - 1);
-  loop = LABEL();
-  OP1(SLJIT_MOVU, SLJIT_MEM1(SLJIT_R1), sizeof(sljit_sw), SLJIT_R0, 0);
-  OP2(SLJIT_SUB | SLJIT_SET_Z, SLJIT_R2, 0, SLJIT_R2, 0, SLJIT_IMM, 1);
-  JUMPTO(SLJIT_NOT_ZERO, loop);
+  if (sljit_emit_mem(compiler, SLJIT_MOV | SLJIT_MEM_SUPP | SLJIT_MEM_STORE | SLJIT_MEM_PRE, SLJIT_R0, SLJIT_MEM1(SLJIT_R1), sizeof(sljit_sw)) == SLJIT_SUCCESS)
+    {
+    GET_LOCAL_BASE(SLJIT_R1, 0, OVECTOR_START);
+    OP1(SLJIT_MOV, SLJIT_R2, 0, SLJIT_IMM, length - 1);
+    loop = LABEL();
+    sljit_emit_mem(compiler, SLJIT_MOV | SLJIT_MEM_STORE | SLJIT_MEM_PRE, SLJIT_R0, SLJIT_MEM1(SLJIT_R1), sizeof(sljit_sw));
+    OP2(SLJIT_SUB | SLJIT_SET_Z, SLJIT_R2, 0, SLJIT_R2, 0, SLJIT_IMM, 1);
+    JUMPTO(SLJIT_NOT_ZERO, loop);
+    }
+  else
+    {
+    GET_LOCAL_BASE(SLJIT_R1, 0, OVECTOR_START + sizeof(sljit_sw));
+    OP1(SLJIT_MOV, SLJIT_R2, 0, SLJIT_IMM, length - 1);
+    loop = LABEL();
+    OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_R1), 0, SLJIT_R0, 0);
+    OP2(SLJIT_ADD, SLJIT_R1, 0, SLJIT_R1, 0, SLJIT_IMM, sizeof(sljit_sw));
+    OP2(SLJIT_SUB | SLJIT_SET_Z, SLJIT_R2, 0, SLJIT_R2, 0, SLJIT_IMM, 1);
+    JUMPTO(SLJIT_NOT_ZERO, loop);
+    }
   }
 }
 
@@ -2421,12 +2445,25 @@ if (length < 8)
   }
 else
   {
-  GET_LOCAL_BASE(TMP2, 0, OVECTOR_START + sizeof(sljit_sw));
-  OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_IMM, length - 2);
-  loop = LABEL();
-  OP1(SLJIT_MOVU, SLJIT_MEM1(TMP2), sizeof(sljit_sw), TMP1, 0);
-  OP2(SLJIT_SUB | SLJIT_SET_Z, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, 1);
-  JUMPTO(SLJIT_NOT_ZERO, loop);
+  if (sljit_emit_mem(compiler, SLJIT_MOV | SLJIT_MEM_SUPP | SLJIT_MEM_STORE | SLJIT_MEM_PRE, TMP1, SLJIT_MEM1(TMP2), sizeof(sljit_sw)) == SLJIT_SUCCESS)
+    {
+    GET_LOCAL_BASE(TMP2, 0, OVECTOR_START + sizeof(sljit_sw));
+    OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_IMM, length - 2);
+    loop = LABEL();
+    sljit_emit_mem(compiler, SLJIT_MOV | SLJIT_MEM_STORE | SLJIT_MEM_PRE, TMP1, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+    OP2(SLJIT_SUB | SLJIT_SET_Z, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, 1);
+    JUMPTO(SLJIT_NOT_ZERO, loop);
+    }
+  else
+    {
+    GET_LOCAL_BASE(TMP2, 0, OVECTOR_START + 2 * sizeof(sljit_sw));
+    OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_IMM, length - 2);
+    loop = LABEL();
+    OP1(SLJIT_MOV, SLJIT_MEM1(TMP2), 0, TMP1, 0);
+    OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, SLJIT_IMM, sizeof(sljit_sw));
+    OP2(SLJIT_SUB | SLJIT_SET_Z, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, 1);
+    JUMPTO(SLJIT_NOT_ZERO, loop);
+    }
   }
 
 OP1(SLJIT_MOV, STACK_TOP, 0, ARGUMENTS, 0);
@@ -2436,10 +2473,10 @@ if (common->control_head_ptr != 0)
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->control_head_ptr, SLJIT_IMM, 0);
 OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(STACK_TOP), SLJIT_OFFSETOF(jit_arguments, stack));
 OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), common->start_ptr);
-OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(STACK_TOP), SLJIT_OFFSETOF(struct sljit_stack, base));
+OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(STACK_TOP), SLJIT_OFFSETOF(struct sljit_stack, end));
 }
 
-static sljit_sw SLJIT_CALL do_search_mark(sljit_sw *current, const pcre_uchar *skip_arg)
+static sljit_sw SLJIT_FUNC do_search_mark(sljit_sw *current, const pcre_uchar *skip_arg)
 {
 while (current != NULL)
   {
@@ -2460,7 +2497,7 @@ while (current != NULL)
   SLJIT_ASSERT(current[0] == 0 || current < (sljit_sw*)current[0]);
   current = (sljit_sw*)current[0];
   }
-return -1;
+return 0;
 }
 
 static SLJIT_INLINE void copy_ovector(compiler_common *common, int topbracket)
@@ -2468,6 +2505,7 @@ static SLJIT_INLINE void copy_ovector(compiler_common *common, int topbracket)
 DEFINE_COMPILER;
 struct sljit_label *loop;
 struct sljit_jump *early_quit;
+BOOL has_pre;
 
 /* At this point we can freely use all registers. */
 OP1(SLJIT_MOV, SLJIT_S2, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1));
@@ -2481,17 +2519,30 @@ if (common->mark_ptr != 0)
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_R0), SLJIT_OFFSETOF(jit_arguments, mark_ptr), SLJIT_R2, 0);
 OP2(SLJIT_SUB, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_R0), SLJIT_OFFSETOF(jit_arguments, offsets), SLJIT_IMM, sizeof(int));
 OP1(SLJIT_MOV, SLJIT_R0, 0, SLJIT_MEM1(SLJIT_R0), SLJIT_OFFSETOF(jit_arguments, begin));
-GET_LOCAL_BASE(SLJIT_S0, 0, OVECTOR_START);
+
+has_pre = sljit_emit_mem(compiler, SLJIT_MOV | SLJIT_MEM_SUPP | SLJIT_MEM_PRE, SLJIT_S1, SLJIT_MEM1(SLJIT_S0), sizeof(sljit_sw)) == SLJIT_SUCCESS;
+GET_LOCAL_BASE(SLJIT_S0, 0, OVECTOR_START - (has_pre ? sizeof(sljit_sw) : 0));
+
 /* Unlikely, but possible */
 early_quit = CMP(SLJIT_EQUAL, SLJIT_R1, 0, SLJIT_IMM, 0);
 loop = LABEL();
-OP2(SLJIT_SUB, SLJIT_S1, 0, SLJIT_MEM1(SLJIT_S0), 0, SLJIT_R0, 0);
-OP2(SLJIT_ADD, SLJIT_S0, 0, SLJIT_S0, 0, SLJIT_IMM, sizeof(sljit_sw));
+
+if (has_pre)
+  sljit_emit_mem(compiler, SLJIT_MOV | SLJIT_MEM_PRE, SLJIT_S1, SLJIT_MEM1(SLJIT_S0), sizeof(sljit_sw));
+else
+  {
+  OP1(SLJIT_MOV, SLJIT_S1, 0, SLJIT_MEM1(SLJIT_S0), 0);
+  OP2(SLJIT_ADD, SLJIT_S0, 0, SLJIT_S0, 0, SLJIT_IMM, sizeof(sljit_sw));
+  }
+
+OP2(SLJIT_ADD, SLJIT_R2, 0, SLJIT_R2, 0, SLJIT_IMM, sizeof(int));
+OP2(SLJIT_SUB, SLJIT_S1, 0, SLJIT_S1, 0, SLJIT_R0, 0);
 /* Copy the integer value to the output buffer */
 #if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
 OP2(SLJIT_ASHR, SLJIT_S1, 0, SLJIT_S1, 0, SLJIT_IMM, UCHAR_SHIFT);
 #endif
-OP1(SLJIT_MOVU_S32, SLJIT_MEM1(SLJIT_R2), sizeof(int), SLJIT_S1, 0);
+
+OP1(SLJIT_MOV_S32, SLJIT_MEM1(SLJIT_R2), 0, SLJIT_S1, 0);
 OP2(SLJIT_SUB | SLJIT_SET_Z, SLJIT_R1, 0, SLJIT_R1, 0, SLJIT_IMM, 1);
 JUMPTO(SLJIT_NOT_ZERO, loop);
 JUMPHERE(early_quit);
@@ -2499,14 +2550,29 @@ JUMPHERE(early_quit);
 /* Calculate the return value, which is the maximum ovector value. */
 if (topbracket > 1)
   {
-  GET_LOCAL_BASE(SLJIT_R0, 0, OVECTOR_START + topbracket * 2 * sizeof(sljit_sw));
-  OP1(SLJIT_MOV, SLJIT_R1, 0, SLJIT_IMM, topbracket + 1);
+  if (sljit_emit_mem(compiler, SLJIT_MOV | SLJIT_MEM_SUPP | SLJIT_MEM_PRE, SLJIT_R2, SLJIT_MEM1(SLJIT_R0), -(2 * (sljit_sw)sizeof(sljit_sw))) == SLJIT_SUCCESS)
+    {
+    GET_LOCAL_BASE(SLJIT_R0, 0, OVECTOR_START + topbracket * 2 * sizeof(sljit_sw));
+    OP1(SLJIT_MOV, SLJIT_R1, 0, SLJIT_IMM, topbracket + 1);
 
-  /* OVECTOR(0) is never equal to SLJIT_S2. */
-  loop = LABEL();
-  OP1(SLJIT_MOVU, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_R0), -(2 * (sljit_sw)sizeof(sljit_sw)));
-  OP2(SLJIT_SUB, SLJIT_R1, 0, SLJIT_R1, 0, SLJIT_IMM, 1);
-  CMPTO(SLJIT_EQUAL, SLJIT_R2, 0, SLJIT_S2, 0, loop);
+    /* OVECTOR(0) is never equal to SLJIT_S2. */
+    loop = LABEL();
+    sljit_emit_mem(compiler, SLJIT_MOV | SLJIT_MEM_PRE, SLJIT_R2, SLJIT_MEM1(SLJIT_R0), -(2 * (sljit_sw)sizeof(sljit_sw)));
+    OP2(SLJIT_SUB, SLJIT_R1, 0, SLJIT_R1, 0, SLJIT_IMM, 1);
+    CMPTO(SLJIT_EQUAL, SLJIT_R2, 0, SLJIT_S2, 0, loop);
+    }
+  else
+    {
+    GET_LOCAL_BASE(SLJIT_R0, 0, OVECTOR_START + (topbracket - 1) * 2 * sizeof(sljit_sw));
+    OP1(SLJIT_MOV, SLJIT_R1, 0, SLJIT_IMM, topbracket + 1);
+
+    /* OVECTOR(0) is never equal to SLJIT_S2. */
+    loop = LABEL();
+    OP1(SLJIT_MOV, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_R0), 0);
+    OP2(SLJIT_SUB, SLJIT_R0, 0, SLJIT_R0, 0, SLJIT_IMM, 2 * (sljit_sw)sizeof(sljit_sw));
+    OP2(SLJIT_SUB, SLJIT_R1, 0, SLJIT_R1, 0, SLJIT_IMM, 1);
+    CMPTO(SLJIT_EQUAL, SLJIT_R2, 0, SLJIT_S2, 0, loop);
+    }
   OP1(SLJIT_MOV, SLJIT_RETURN_REG, 0, SLJIT_R1, 0);
   }
 else
@@ -5167,93 +5233,190 @@ OP_FLAGS(SLJIT_OR | SLJIT_SET_Z, TMP2, 0, SLJIT_EQUAL);
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
 }
 
-#define CHAR1 STR_END
-#define CHAR2 STACK_TOP
-
 static void do_casefulcmp(compiler_common *common)
 {
 DEFINE_COMPILER;
 struct sljit_jump *jump;
 struct sljit_label *label;
+int char1_reg;
+int char2_reg;
 
-sljit_emit_fast_enter(compiler, RETURN_ADDR, 0);
+if (sljit_get_register_index(TMP3) < 0)
+  {
+  char1_reg = STR_END;
+  char2_reg = STACK_TOP;
+  }
+else
+  {
+  char1_reg = TMP3;
+  char2_reg = RETURN_ADDR;
+  }
+
+sljit_emit_fast_enter(compiler, SLJIT_MEM1(SLJIT_SP), LOCALS0);
 OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
-OP1(SLJIT_MOV, TMP3, 0, CHAR1, 0);
-OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS0, CHAR2, 0);
-OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(1));
-OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 
-label = LABEL();
-OP1(MOVU_UCHAR, CHAR1, 0, SLJIT_MEM1(TMP1), IN_UCHARS(1));
-OP1(MOVU_UCHAR, CHAR2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-jump = CMP(SLJIT_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
-OP2(SLJIT_SUB | SLJIT_SET_Z, TMP2, 0, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
-JUMPTO(SLJIT_NOT_ZERO, label);
+if (char1_reg == STR_END)
+  {
+  OP1(SLJIT_MOV, TMP3, 0, char1_reg, 0);
+  OP1(SLJIT_MOV, RETURN_ADDR, 0, char2_reg, 0);
+  }
 
-JUMPHERE(jump);
-OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-OP1(SLJIT_MOV, CHAR1, 0, TMP3, 0);
-OP1(SLJIT_MOV, CHAR2, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
-sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
-}
+if (sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_SUPP | SLJIT_MEM_POST, char1_reg, SLJIT_MEM1(TMP1), IN_UCHARS(1)) == SLJIT_SUCCESS)
+  {
+  label = LABEL();
+  sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_POST, char1_reg, SLJIT_MEM1(TMP1), IN_UCHARS(1));
+  sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_POST, char2_reg, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
+  jump = CMP(SLJIT_NOT_EQUAL, char1_reg, 0, char2_reg, 0);
+  OP2(SLJIT_SUB | SLJIT_SET_Z, TMP2, 0, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
+  JUMPTO(SLJIT_NOT_ZERO, label);
+
+  JUMPHERE(jump);
+  OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
+  }
+else if (sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_SUPP | SLJIT_MEM_PRE, char1_reg, SLJIT_MEM1(TMP1), IN_UCHARS(1)) == SLJIT_SUCCESS)
+  {
+  OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(1));
+  OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+
+  label = LABEL();
+  sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_PRE, char1_reg, SLJIT_MEM1(TMP1), IN_UCHARS(1));
+  sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_PRE, char2_reg, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
+  jump = CMP(SLJIT_NOT_EQUAL, char1_reg, 0, char2_reg, 0);
+  OP2(SLJIT_SUB | SLJIT_SET_Z, TMP2, 0, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
+  JUMPTO(SLJIT_NOT_ZERO, label);
 
-#define LCC_TABLE STACK_LIMIT
+  JUMPHERE(jump);
+  OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
+  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+  }
+else
+  {
+  label = LABEL();
+  OP1(MOV_UCHAR, char1_reg, 0, SLJIT_MEM1(TMP1), 0);
+  OP1(MOV_UCHAR, char2_reg, 0, SLJIT_MEM1(STR_PTR), 0);
+  OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(1));
+  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+  jump = CMP(SLJIT_NOT_EQUAL, char1_reg, 0, char2_reg, 0);
+  OP2(SLJIT_SUB | SLJIT_SET_Z, TMP2, 0, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
+  JUMPTO(SLJIT_NOT_ZERO, label);
+
+  JUMPHERE(jump);
+  OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
+  }
+
+if (char1_reg == STR_END)
+  {
+  OP1(SLJIT_MOV, char1_reg, 0, TMP3, 0);
+  OP1(SLJIT_MOV, char2_reg, 0, RETURN_ADDR, 0);
+  }
+
+sljit_emit_fast_return(compiler, TMP1, 0);
+}
 
 static void do_caselesscmp(compiler_common *common)
 {
 DEFINE_COMPILER;
 struct sljit_jump *jump;
 struct sljit_label *label;
+int char1_reg = STR_END;
+int char2_reg;
+int lcc_table;
+int opt_type = 0;
 
-sljit_emit_fast_enter(compiler, RETURN_ADDR, 0);
+if (sljit_get_register_index(TMP3) < 0)
+  {
+  char2_reg = STACK_TOP;
+  lcc_table = STACK_LIMIT;
+  }
+else
+  {
+  char2_reg = RETURN_ADDR;
+  lcc_table = TMP3;
+  }
+
+if (sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_SUPP | SLJIT_MEM_POST, char1_reg, SLJIT_MEM1(TMP1), IN_UCHARS(1)) == SLJIT_SUCCESS)
+  opt_type = 1;
+else if (sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_SUPP | SLJIT_MEM_PRE, char1_reg, SLJIT_MEM1(TMP1), IN_UCHARS(1)) == SLJIT_SUCCESS)
+  opt_type = 2;
+
+sljit_emit_fast_enter(compiler, SLJIT_MEM1(SLJIT_SP), LOCALS0);
 OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
 
-OP1(SLJIT_MOV, TMP3, 0, LCC_TABLE, 0);
-OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS0, CHAR1, 0);
-OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, CHAR2, 0);
-OP1(SLJIT_MOV, LCC_TABLE, 0, SLJIT_IMM, common->lcc);
-OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(1));
-OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, char1_reg, 0);
+
+if (char2_reg == STACK_TOP)
+  {
+  OP1(SLJIT_MOV, TMP3, 0, char2_reg, 0);
+  OP1(SLJIT_MOV, RETURN_ADDR, 0, lcc_table, 0);
+  }
+
+OP1(SLJIT_MOV, lcc_table, 0, SLJIT_IMM, common->lcc);
+
+if (opt_type == 1)
+  {
+  label = LABEL();
+  sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_POST, char1_reg, SLJIT_MEM1(TMP1), IN_UCHARS(1));
+  sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_POST, char2_reg, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
+  }
+else if (opt_type == 2)
+  {
+  OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(1));
+  OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+
+  label = LABEL();
+  sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_PRE, char1_reg, SLJIT_MEM1(TMP1), IN_UCHARS(1));
+  sljit_emit_mem(compiler, MOV_UCHAR | SLJIT_MEM_PRE, char2_reg, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
+  }
+else
+  {
+  label = LABEL();
+  OP1(MOV_UCHAR, char1_reg, 0, SLJIT_MEM1(TMP1), 0);
+  OP1(MOV_UCHAR, char2_reg, 0, SLJIT_MEM1(STR_PTR), 0);
+  OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(1));
+  }
 
-label = LABEL();
-OP1(MOVU_UCHAR, CHAR1, 0, SLJIT_MEM1(TMP1), IN_UCHARS(1));
-OP1(MOVU_UCHAR, CHAR2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
 #ifndef COMPILE_PCRE8
-jump = CMP(SLJIT_GREATER, CHAR1, 0, SLJIT_IMM, 255);
+jump = CMP(SLJIT_GREATER, char1_reg, 0, SLJIT_IMM, 255);
 #endif
-OP1(SLJIT_MOV_U8, CHAR1, 0, SLJIT_MEM2(LCC_TABLE, CHAR1), 0);
+OP1(SLJIT_MOV_U8, char1_reg, 0, SLJIT_MEM2(lcc_table, char1_reg), 0);
 #ifndef COMPILE_PCRE8
 JUMPHERE(jump);
-jump = CMP(SLJIT_GREATER, CHAR2, 0, SLJIT_IMM, 255);
+jump = CMP(SLJIT_GREATER, char2_reg, 0, SLJIT_IMM, 255);
 #endif
-OP1(SLJIT_MOV_U8, CHAR2, 0, SLJIT_MEM2(LCC_TABLE, CHAR2), 0);
+OP1(SLJIT_MOV_U8, char2_reg, 0, SLJIT_MEM2(lcc_table, char2_reg), 0);
 #ifndef COMPILE_PCRE8
 JUMPHERE(jump);
 #endif
-jump = CMP(SLJIT_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
+
+if (opt_type == 0)
+  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
+
+jump = CMP(SLJIT_NOT_EQUAL, char1_reg, 0, char2_reg, 0);
 OP2(SLJIT_SUB | SLJIT_SET_Z, TMP2, 0, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
 JUMPTO(SLJIT_NOT_ZERO, label);
 
 JUMPHERE(jump);
-OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-OP1(SLJIT_MOV, LCC_TABLE, 0, TMP3, 0);
-OP1(SLJIT_MOV, CHAR1, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
-OP1(SLJIT_MOV, CHAR2, 0, SLJIT_MEM1(SLJIT_SP), LOCALS1);
-sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
-}
+OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
+
+if (opt_type == 2)
+  OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 
-#undef LCC_TABLE
-#undef CHAR1
-#undef CHAR2
+if (char2_reg == STACK_TOP)
+  {
+  OP1(SLJIT_MOV, char2_reg, 0, TMP3, 0);
+  OP1(SLJIT_MOV, lcc_table, 0, RETURN_ADDR, 0);
+  }
+
+OP1(SLJIT_MOV, char1_reg, 0, SLJIT_MEM1(SLJIT_SP), LOCALS1);
+sljit_emit_fast_return(compiler, TMP1, 0);
+}
 
 #if defined SUPPORT_UTF && defined SUPPORT_UCP
 
-static const pcre_uchar * SLJIT_CALL do_utf_caselesscmp(pcre_uchar *src1, jit_arguments *args, pcre_uchar *end1)
+static const pcre_uchar * SLJIT_FUNC do_utf_caselesscmp(pcre_uchar *src1, pcre_uchar *src2, pcre_uchar *end1, pcre_uchar *end2)
 {
 /* This function would be ineffective to do in JIT level. */
 sljit_u32 c1, c2;
-const pcre_uchar *src2 = args->uchar_ptr;
-const pcre_uchar *end2 = args->end;
 const ucd_record *ur;
 const sljit_u32 *pp;
 
@@ -6776,32 +6939,37 @@ else
 #if defined SUPPORT_UTF && defined SUPPORT_UCP
 if (common->utf && *cc == OP_REFI)
   {
-  SLJIT_ASSERT(TMP1 == SLJIT_R0 && STACK_TOP == SLJIT_R1 && TMP2 == SLJIT_R2);
+  SLJIT_ASSERT(TMP1 == SLJIT_R0 && STACK_TOP == SLJIT_R1);
   if (ref)
-    OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
+    OP1(SLJIT_MOV, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
   else
-    OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+    OP1(SLJIT_MOV, SLJIT_R2, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
 
   if (withchecks)
-    jump = CMP(SLJIT_EQUAL, TMP1, 0, TMP2, 0);
+    jump = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_R2, 0);
 
-  /* Needed to save important temporary registers. */
+  /* No free saved registers so save data on stack. */
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS0, STACK_TOP, 0);
-  OP1(SLJIT_MOV, SLJIT_R1, 0, ARGUMENTS, 0);
-  OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_R1), SLJIT_OFFSETOF(jit_arguments, uchar_ptr), STR_PTR, 0);
-  sljit_emit_ijump(compiler, SLJIT_CALL3, SLJIT_IMM, SLJIT_FUNC_OFFSET(do_utf_caselesscmp));
+  OP1(SLJIT_MOV, SLJIT_R1, 0, STR_PTR, 0);
+  OP1(SLJIT_MOV, SLJIT_R3, 0, STR_END, 0);
+  sljit_emit_icall(compiler, SLJIT_CALL, SLJIT_RET(SW) | SLJIT_ARG1(SW) | SLJIT_ARG2(SW) | SLJIT_ARG3(SW) | SLJIT_ARG4(SW), SLJIT_IMM, SLJIT_FUNC_OFFSET(do_utf_caselesscmp));
   OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
+  OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_RETURN_REG, 0);
+
   if (common->mode == JIT_COMPILE)
     add_jump(compiler, backtracks, CMP(SLJIT_LESS_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1));
   else
     {
-    add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0));
-    nopartial = CMP(SLJIT_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1);
+    OP2(SLJIT_SUB | SLJIT_SET_Z | SLJIT_SET_LESS, SLJIT_UNUSED, 0, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1);
+
+    add_jump(compiler, backtracks, JUMP(SLJIT_LESS));
+
+    nopartial = JUMP(SLJIT_NOT_EQUAL);
+    OP1(SLJIT_MOV, STR_PTR, 0, STR_END, 0);
     check_partial(common, FALSE);
     add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
     JUMPHERE(nopartial);
     }
-  OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_RETURN_REG, 0);
   }
 else
 #endif /* SUPPORT_UTF && SUPPORT_UCP */
@@ -7125,7 +7293,7 @@ add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IM
 return cc + 1 + LINK_SIZE;
 }
 
-static int SLJIT_CALL do_callout(struct jit_arguments *arguments, PUBL(callout_block) *callout_block, pcre_uchar **jit_ovector)
+static sljit_s32 SLJIT_FUNC do_callout(struct jit_arguments *arguments, PUBL(callout_block) *callout_block, pcre_uchar **jit_ovector)
 {
 const pcre_uchar *begin = arguments->begin;
 int *offset_vector = arguments->offsets;
@@ -7207,18 +7375,17 @@ OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS0, STACK_TOP, 0);
 /* SLJIT_R0 = arguments */
 OP1(SLJIT_MOV, SLJIT_R1, 0, STACK_TOP, 0);
 GET_LOCAL_BASE(SLJIT_R2, 0, OVECTOR_START);
-sljit_emit_ijump(compiler, SLJIT_CALL3, SLJIT_IMM, SLJIT_FUNC_OFFSET(do_callout));
-OP1(SLJIT_MOV_S32, SLJIT_RETURN_REG, 0, SLJIT_RETURN_REG, 0);
+sljit_emit_icall(compiler, SLJIT_CALL, SLJIT_RET(S32) | SLJIT_ARG1(SW) | SLJIT_ARG2(SW) | SLJIT_ARG3(SW), SLJIT_IMM, SLJIT_FUNC_OFFSET(do_callout));
 OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
 free_stack(common, CALLOUT_ARG_SIZE / sizeof(sljit_sw));
 
 /* Check return value. */
-OP2(SLJIT_SUB | SLJIT_SET_Z | SLJIT_SET_SIG_GREATER, SLJIT_UNUSED, 0, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
-add_jump(compiler, &backtrack->topbacktracks, JUMP(SLJIT_SIG_GREATER));
+OP2(SLJIT_SUB32 | SLJIT_SET_Z | SLJIT_SET_SIG_GREATER, SLJIT_UNUSED, 0, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
+add_jump(compiler, &backtrack->topbacktracks, JUMP(SLJIT_SIG_GREATER32));
 if (common->forced_quit_label == NULL)
-  add_jump(compiler, &common->forced_quit, JUMP(SLJIT_NOT_EQUAL) /* SIG_LESS */);
+  add_jump(compiler, &common->forced_quit, JUMP(SLJIT_NOT_EQUAL32) /* SIG_LESS */);
 else
-  JUMPTO(SLJIT_NOT_EQUAL /* SIG_LESS */, common->forced_quit_label);
+  JUMPTO(SLJIT_NOT_EQUAL32 /* SIG_LESS */, common->forced_quit_label);
 return cc + 2 + 2 * LINK_SIZE;
 }
 
@@ -10439,11 +10606,11 @@ if (opcode == OP_SKIP_ARG)
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), common->control_head_ptr);
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS0, STACK_TOP, 0);
   OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_IMM, (sljit_sw)(current->cc + 2));
-  sljit_emit_ijump(compiler, SLJIT_CALL2, SLJIT_IMM, SLJIT_FUNC_OFFSET(do_search_mark));
+  sljit_emit_icall(compiler, SLJIT_CALL, SLJIT_RET(SW) | SLJIT_ARG1(SW) | SLJIT_ARG2(SW), SLJIT_IMM, SLJIT_FUNC_OFFSET(do_search_mark));
   OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
 
   OP1(SLJIT_MOV, STR_PTR, 0, TMP1, 0);
-  add_jump(compiler, &common->reset_match, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, -1));
+  add_jump(compiler, &common->reset_match, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0));
   return;
   }
 
@@ -11031,7 +11198,7 @@ if (!compiler)
 common->compiler = compiler;
 
 /* Main pcre_jit_exec entry. */
-sljit_emit_enter(compiler, 0, 1, 5, 5, 0, 0, private_data_size);
+sljit_emit_enter(compiler, 0, SLJIT_ARG1(SW), 5, 5, 0, 0, private_data_size);
 
 /* Register init. */
 reset_ovector(common, (re->top_bracket + 1) * 2);
@@ -11044,8 +11211,8 @@ OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str))
 OP1(SLJIT_MOV, STR_END, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, end));
 OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, stack));
 OP1(SLJIT_MOV_U32, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, limit_match));
-OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(struct sljit_stack, base));
-OP1(SLJIT_MOV, STACK_LIMIT, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(struct sljit_stack, limit));
+OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(struct sljit_stack, end));
+OP1(SLJIT_MOV, STACK_LIMIT, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(struct sljit_stack, start));
 OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
 OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LIMIT_MATCH, TMP1, 0);
 
@@ -11251,20 +11418,22 @@ common->quit_label = quit_label;
 set_jumps(common->stackalloc, LABEL());
 /* RETURN_ADDR is not a saved register. */
 sljit_emit_fast_enter(compiler, SLJIT_MEM1(SLJIT_SP), LOCALS0);
-OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, TMP2, 0);
-OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
-OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, stack));
-OP1(SLJIT_MOV, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(struct sljit_stack, top), STACK_TOP, 0);
-OP2(SLJIT_SUB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(struct sljit_stack, limit), SLJIT_IMM, STACK_GROWTH_RATE);
 
-sljit_emit_ijump(compiler, SLJIT_CALL2, SLJIT_IMM, SLJIT_FUNC_OFFSET(sljit_stack_resize));
-jump = CMP(SLJIT_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
-OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
-OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, stack));
-OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(struct sljit_stack, top));
-OP1(SLJIT_MOV, STACK_LIMIT, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(struct sljit_stack, limit));
-OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(SLJIT_SP), LOCALS1);
-sljit_emit_fast_return(compiler, SLJIT_MEM1(SLJIT_SP), LOCALS0);
+SLJIT_ASSERT(TMP1 == SLJIT_R0 && STACK_TOP == SLJIT_R1);
+
+OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, STACK_TOP, 0);
+OP1(SLJIT_MOV, SLJIT_R0, 0, ARGUMENTS, 0);
+OP2(SLJIT_SUB, SLJIT_R1, 0, STACK_LIMIT, 0, SLJIT_IMM, STACK_GROWTH_RATE);
+OP1(SLJIT_MOV, SLJIT_R0, 0, SLJIT_MEM1(SLJIT_R0), SLJIT_OFFSETOF(jit_arguments, stack));
+OP1(SLJIT_MOV, STACK_LIMIT, 0, TMP2, 0);
+
+sljit_emit_icall(compiler, SLJIT_CALL, SLJIT_RET(SW) | SLJIT_ARG1(SW) | SLJIT_ARG2(SW), SLJIT_IMM, SLJIT_FUNC_OFFSET(sljit_stack_resize));
+jump = CMP(SLJIT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
+OP1(SLJIT_MOV, TMP2, 0, STACK_LIMIT, 0);
+OP1(SLJIT_MOV, STACK_LIMIT, 0, SLJIT_RETURN_REG, 0);
+OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
+OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(SLJIT_SP), LOCALS1);
+sljit_emit_fast_return(compiler, TMP1, 0);
 
 /* Allocation failed. */
 JUMPHERE(jump);
@@ -11409,9 +11578,9 @@ union {
 sljit_u8 local_space[MACHINE_STACK_SIZE];
 struct sljit_stack local_stack;
 
-local_stack.max_limit = local_space;
-local_stack.limit = local_space;
-local_stack.base = local_space + MACHINE_STACK_SIZE;
+local_stack.min_start = local_space;
+local_stack.start = local_space;
+local_stack.end = local_space + MACHINE_STACK_SIZE;
 local_stack.top = local_space + MACHINE_STACK_SIZE;
 arguments->stack = &local_stack;
 convert_executable_func.executable_func = executable_func;
@@ -11529,7 +11698,7 @@ if ((options & PCRE_PARTIAL_HARD) != 0)
 else if ((options & PCRE_PARTIAL_SOFT) != 0)
   mode = JIT_PARTIAL_SOFT_COMPILE;
 
-if (functions->executable_funcs[mode] == NULL)
+if (functions == NULL || functions->executable_funcs[mode] == NULL)
   return PCRE_ERROR_JIT_BADOPTION;
 
 /* Sanity checks should be handled by pcre_exec. */
diff --git a/pcre/pcregrep.c b/pcre/pcregrep.c
index a58ff823509..79d9e286c75 100644
--- a/pcre/pcregrep.c
+++ b/pcre/pcregrep.c
@@ -1387,8 +1387,8 @@ Returns:            nothing
 */
 
 static void
-do_after_lines(int lastmatchnumber, char *lastmatchrestart, char *endptr,
-  char *printname)
+do_after_lines(unsigned long int lastmatchnumber, char *lastmatchrestart,
+  char *endptr, char *printname)
 {
 if (after_context > 0 && lastmatchnumber > 0)
   {
@@ -1398,7 +1398,7 @@ if (after_context > 0 && lastmatchnumber > 0)
     int ellength;
     char *pp = lastmatchrestart;
     if (printname != NULL) fprintf(stdout, "%s-", printname);
-    if (number) fprintf(stdout, "%d-", lastmatchnumber++);
+    if (number) fprintf(stdout, "%lu-", lastmatchnumber++);
     pp = end_of_line(pp, endptr, &ellength);
     FWRITE(lastmatchrestart, 1, pp - lastmatchrestart, stdout);
     lastmatchrestart = pp;
@@ -1502,11 +1502,11 @@ static int
 pcregrep(void *handle, int frtype, char *filename, char *printname)
 {
 int rc = 1;
-int linenumber = 1;
-int lastmatchnumber = 0;
-int count = 0;
 int filepos = 0;
 int offsets[OFFSET_SIZE];
+unsigned long int linenumber = 1;
+unsigned long int lastmatchnumber = 0;
+unsigned long int count = 0;
 char *lastmatchrestart = NULL;
 char *ptr = main_buffer;
 char *endptr;
@@ -1609,7 +1609,7 @@ while (ptr < endptr)
 
   if (endlinelength == 0 && t == main_buffer + bufsize)
     {
-    fprintf(stderr, "pcregrep: line %d%s%s is too long for the internal buffer\n"
+    fprintf(stderr, "pcregrep: line %lu%s%s is too long for the internal buffer\n"
                     "pcregrep: check the --buffer-size option\n",
                     linenumber,
                     (filename == NULL)? "" : " of file ",
@@ -1747,7 +1747,7 @@ while (ptr < endptr)
           prevoffsets[1] = offsets[1];
 
           if (printname != NULL) fprintf(stdout, "%s:", printname);
-          if (number) fprintf(stdout, "%d:", linenumber);
+          if (number) fprintf(stdout, "%lu:", linenumber);
 
           /* Handle --line-offsets */
 
@@ -1862,7 +1862,7 @@ while (ptr < endptr)
           {
           char *pp = lastmatchrestart;
           if (printname != NULL) fprintf(stdout, "%s-", printname);
-          if (number) fprintf(stdout, "%d-", lastmatchnumber++);
+          if (number) fprintf(stdout, "%lu-", lastmatchnumber++);
           pp = end_of_line(pp, endptr, &ellength);
           FWRITE(lastmatchrestart, 1, pp - lastmatchrestart, stdout);
           lastmatchrestart = pp;
@@ -1902,7 +1902,7 @@ while (ptr < endptr)
           int ellength;
           char *pp = p;
           if (printname != NULL) fprintf(stdout, "%s-", printname);
-          if (number) fprintf(stdout, "%d-", linenumber - linecount--);
+          if (number) fprintf(stdout, "%lu-", linenumber - linecount--);
           pp = end_of_line(pp, endptr, &ellength);
           FWRITE(p, 1, pp - p, stdout);
           p = pp;
@@ -1916,7 +1916,7 @@ while (ptr < endptr)
         endhyphenpending = TRUE;
 
       if (printname != NULL) fprintf(stdout, "%s:", printname);
-      if (number) fprintf(stdout, "%d:", linenumber);
+      if (number) fprintf(stdout, "%lu:", linenumber);
 
       /* In multiline mode, we want to print to the end of the line in which
       the end of the matched string is found, so we adjust linelength and the
@@ -2112,7 +2112,7 @@ if (count_only && !quiet)
     {
     if (printname != NULL && filenames != FN_NONE)
       fprintf(stdout, "%s:", printname);
-    fprintf(stdout, "%d\n", count);
+    fprintf(stdout, "%lu\n", count);
     }
   }
 
@@ -2234,7 +2234,7 @@ if (isdirectory(pathname))
 
   if (dee_action == dee_RECURSE)
     {
-    char buffer[1024];
+    char buffer[2048];
     char *nextfile;
     directory_type *dir = opendirectory(pathname);
 
@@ -2249,7 +2249,14 @@ if (isdirectory(pathname))
     while ((nextfile = readdirectory(dir)) != NULL)
       {
       int frc;
-      sprintf(buffer, "%.512s%c%.128s", pathname, FILESEP, nextfile);
+      size_t fnlength = strlen(pathname) + strlen(nextfile) + 2;
+      if (fnlength > 2048)
+        {
+        fprintf(stderr, "pcre2grep: recursive filename is too long\n");
+        rc = 2;
+        break;
+        }
+      sprintf(buffer, "%s%c%s", pathname, FILESEP, nextfile);
       frc = grep_or_recurse(buffer, dir_recurse, FALSE);
       if (frc > 1) rc = frc;
        else if (frc == 0 && rc == 1) rc = 0;
@@ -2520,7 +2527,14 @@ if ((popts & PO_FIXED_STRINGS) != 0)
     }
   }
 
-sprintf(buffer, "%s%.*s%s", prefix[popts], patlen, ps, suffix[popts]);
+if (snprintf(buffer, PATBUFSIZE, "%s%.*s%s", prefix[popts], patlen, ps,
+      suffix[popts]) > PATBUFSIZE)
+  {
+  fprintf(stderr, "pcregrep: Buffer overflow while compiling \"%s\"\n",
+    ps);
+  return FALSE;
+  }
+
 p->compiled = pcre_compile(buffer, options, &error, &errptr, pcretables);
 if (p->compiled != NULL) return TRUE;
 
@@ -2756,8 +2770,15 @@ for (i = 1; i < argc; i++)
         int arglen = (argequals == NULL || equals == NULL)?
           (int)strlen(arg) : (int)(argequals - arg);
 
-        sprintf(buff1, "%.*s", baselen, op->long_name);
-        sprintf(buff2, "%s%.*s", buff1, fulllen - baselen - 2, opbra + 1);
+        if (snprintf(buff1, sizeof(buff1), "%.*s", baselen, op->long_name) >
+              (int)sizeof(buff1) ||
+            snprintf(buff2, sizeof(buff2), "%s%.*s", buff1,
+              fulllen - baselen - 2, opbra + 1) > (int)sizeof(buff2))
+          {
+          fprintf(stderr, "pcregrep: Buffer overflow when parsing %s option\n",
+            op->long_name);
+          pcregrep_exit(2);
+          }
 
         if (strncmp(arg, buff1, arglen) == 0 ||
            strncmp(arg, buff2, arglen) == 0)
diff --git a/pcre/pcreposix.c b/pcre/pcreposix.c
index 7b404a71100..a76d6bfca45 100644
--- a/pcre/pcreposix.c
+++ b/pcre/pcreposix.c
@@ -6,7 +6,7 @@
 and semantics are as close as possible to those of the Perl 5 language.
 
                        Written by Philip Hazel
-           Copyright (c) 1997-2017 University of Cambridge
+           Copyright (c) 1997-2018 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -389,8 +389,8 @@ if (rc >= 0)
     {
     for (i = 0; i < (size_t)rc; i++)
       {
-      pmatch[i].rm_so = ovector[i*2] + so;
-      pmatch[i].rm_eo = ovector[i*2+1] + so;
+      pmatch[i].rm_so = (ovector[i*2] < 0)? -1 : ovector[i*2] + so;
+      pmatch[i].rm_eo = (ovector[i*2+1] < 0)? -1: ovector[i*2+1] + so;
       }
     if (allocated_ovector) free(ovector);
     for (; i < nmatch; i++) pmatch[i].rm_so = pmatch[i].rm_eo = -1;
diff --git a/pcre/testdata/testinput2 b/pcre/testdata/testinput2
index 08c6f39a565..8ba4dc4ddab 100644
--- a/pcre/testdata/testinput2
+++ b/pcre/testdata/testinput2
@@ -4249,4 +4249,12 @@ backtracking verbs. --/
 
 /(?=.*[A-Z])/I
 
+"(?<=(a))\1?b"
+    ab
+    aaab 
+
+"(?=(a))\1?b"
+    ab
+    aaab 
+
 /-- End of testinput2 --/
diff --git a/pcre/testdata/testinput5 b/pcre/testdata/testinput5
index 28561a93572..c94008c3f29 100644
--- a/pcre/testdata/testinput5
+++ b/pcre/testdata/testinput5
@@ -798,4 +798,10 @@
 /(?<=\K\x{17f})/8G+
     \x{17f}\x{17f}\x{17f}\x{17f}\x{17f}
 
+/\C[^\v]+\x80/8
+    [AΏBŀC]
+
+/\C[^\d]+\x80/8
+    [AΏBŀC]
+
 /-- End of testinput5 --/
diff --git a/pcre/testdata/testoutput2 b/pcre/testdata/testoutput2
index 811bbefc84c..61ed8d9d4e4 100644
--- a/pcre/testdata/testoutput2
+++ b/pcre/testdata/testoutput2
@@ -14705,4 +14705,20 @@ No options
 No first char
 No need char
 
+"(?<=(a))\1?b"
+    ab
+ 0: b
+ 1: a
+    aaab 
+ 0: ab
+ 1: a
+
+"(?=(a))\1?b"
+    ab
+ 0: ab
+ 1: a
+    aaab 
+ 0: ab
+ 1: a
+
 /-- End of testinput2 --/
diff --git a/pcre/testdata/testoutput5 b/pcre/testdata/testoutput5
index bab989ca7e5..090e1e1c85f 100644
--- a/pcre/testdata/testoutput5
+++ b/pcre/testdata/testoutput5
@@ -1942,4 +1942,12 @@ Need char = 'z'
  0: \x{17f}
  0+ 
 
+/\C[^\v]+\x80/8
+    [AΏBŀC]
+No match
+
+/\C[^\d]+\x80/8
+    [AΏBŀC]
+No match
+
 /-- End of testinput5 --/