Language/consistency edits to error messages

and affected test results.

21 files changed, 378 insertions, 378 deletions

diff --git a/sql/share/czech/errmsg.txt b/sql/share/czech/errmsg.txt
index 29659930579..9381155d69a 100644
--- a/sql/share/czech/errmsg.txt
+++ b/sql/share/czech/errmsg.txt
@@ -209,23 +209,23 @@ character-set=latin2
 "Tabulka '%-.64s' je ozna-Bèena jako poru¹ená a mìla by být opravena",
 "Tabulka '%-.64s' je ozna-Bèena jako poru¹ená a poslední (automatická?) oprava se nezdaøila",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -233,26 +233,26 @@ character-set=latin2
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -260,21 +260,21 @@ character-set=latin2
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -286,11 +286,11 @@ character-set=latin2
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/danish/errmsg.txt b/sql/share/danish/errmsg.txt
index 4fe51036579..51df484fe12 100644
--- a/sql/share/danish/errmsg.txt
+++ b/sql/share/danish/errmsg.txt
@@ -216,10 +216,10 @@ character-set=latin1
 "Update lås kan ikke opnås under en READ UNCOMMITTED transaktion",
 "DROP DATABASE er ikke tilladt mens en tråd holder på globalt read lock",
 "CREATE DATABASE er ikke tilladt mens en tråd holder på globalt read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -227,26 +227,26 @@ character-set=latin1
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
-+ "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Variable '%-.64s' is a %s variable",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%ld) given to %s",
@@ -254,21 +254,21 @@ character-set=latin1
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -280,11 +280,11 @@ character-set=latin1
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support, they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/dutch/errmsg.txt b/sql/share/dutch/errmsg.txt
index f49a6130299..35c3fb52fe4 100644
--- a/sql/share/dutch/errmsg.txt
+++ b/sql/share/dutch/errmsg.txt
@@ -253,8 +253,8 @@ character-set=latin1
 "Kreeg fatale fout %d: '%-.128s' van master tijdens lezen van data uit binaire log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -262,21 +262,21 @@ character-set=latin1
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -288,11 +288,11 @@ character-set=latin1
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/english/errmsg.txt b/sql/share/english/errmsg.txt
index 59011c802b6..6ca5fb50076 100644
--- a/sql/share/english/errmsg.txt
+++ b/sql/share/english/errmsg.txt
@@ -24,7 +24,7 @@ character-set=latin1
 "Can't read dir of '%-.64s' (errno: %d)",
 "Can't change dir to '%-.64s' (errno: %d)",
 "Record has changed since last read in table '%-.64s'",
-"Disk full (%s). Waiting for someone to free some space...",
+"Disk full (%s); waiting for someone to free some space...",
 "Can't write, duplicate key in table '%-.64s'",
 "Error on close of '%-.64s' (errno: %d)",
 "Error reading file '%-.64s' (errno: %d)",
@@ -37,25 +37,25 @@ character-set=latin1
 "Table storage engine for '%-.64s' doesn't have this option",
 "Can't find record in '%-.64s'",
 "Incorrect information in file: '%-.64s'",
-"Incorrect key file for table: '%-.64s'; try to repair it",
+"Incorrect key file for table '%-.64s'; try to repair it",
 "Old key file for table '%-.64s'; repair it!",
 "Table '%-.64s' is read only",
-"Out of memory. Restart daemon and try again (needed %d bytes)",
-"Out of sort memory. Increase daemon sort buffer size",
-"Unexpected eof found when reading file '%-.64s' (errno: %d)",
+"Out of memory; restart server and try again (needed %d bytes)",
+"Out of sort memory; increase server sort buffer size",
+"Unexpected EOF found when reading file '%-.64s' (errno: %d)",
 "Too many connections",
-"Out of memory;  Check if mysqld or some other process uses all available memory. If not you may have to use 'ulimit' to allow mysqld to use more memory or you can add more swap space",
+"Out of memory; check if mysqld or some other process uses all available memory. If not, you may have to use 'ulimit' to allow mysqld to use more memory or you can add more swap space",
 "Can't get hostname for your address",
 "Bad handshake",
 "Access denied for user: '%-.32s'@'%-.64s' to database '%-.64s'",
 "Access denied for user: '%-.32s'@'%-.64s' (Using password: %s)",
-"No Database Selected",
+"No database selected",
 "Unknown command",
 "Column '%-.64s' cannot be null",
 "Unknown database '%-.64s'",
 "Table '%-.64s' already exists",
 "Unknown table '%-.64s'",
-"Column: '%-.64s' in %-.64s is ambiguous",
+"Column '%-.64s' in %-.64s is ambiguous",
 "Server shutdown in progress",
 "Unknown column '%-.64s' in '%-.64s'",
 "'%-.64s' isn't in GROUP BY",
@@ -73,12 +73,12 @@ character-set=latin1
 "Invalid default value for '%-.64s'",
 "Multiple primary key defined",
 "Too many keys specified; max %d keys allowed",
-"Too many key parts specified. Max %d parts allowed",
+"Too many key parts specified; max %d parts allowed",
 "Specified key was too long; max key length is %d bytes",
 "Key column '%-.64s' doesn't exist in table",
 "BLOB column '%-.64s' can't be used in key specification with the used table type",
 "Too big column length for column '%-.64s' (max = %d). Use BLOB instead",
-"Incorrect table definition; There can only be one auto column and it must be defined as a key",
+"Incorrect table definition; there can be only one auto column and it must be defined as a key",
 "%s: ready for connections.\nVersion: '%s'  socket: '%s'  port: %d\n",
 "%s: Normal shutdown\n",
 "%s: Got signal %d. Aborting!\n",
@@ -200,23 +200,23 @@ character-set=latin1
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded; Try restarting transaction",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add or update a child row: a foreign key constraint fails",
@@ -224,26 +224,26 @@ character-set=latin1
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -251,21 +251,21 @@ character-set=latin1
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "ZLIB: Not enough memory",
 "ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)",
 "ZLIB: Input data corrupted",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -277,26 +277,26 @@ character-set=latin1
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL. Otherwise you will get problems if you get an unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
-"Query cache failed to set size %lu, new query cache size is %lu",
+"Query cache failed to set size %lu; new query cache size is %lu",
 "Column '%-.64s' cannot be part of FULLTEXT index",
 "Unknown key cache '%-.100s'",
-"MySQL is started in --skip-name-resolve mode. You need to restart it without this switch for this grant to work",
+"MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work",
 "Unknown table engine '%s'",
-"'%s' is deprecated, use '%s' instead",
+"'%s' is deprecated; use '%s' instead",
 "The target table %-.100s of the %s is not updatable",
-"The '%s' feature was disabled; you need MySQL built with '%s' to have it working",
+"The '%s' feature is disabled; you need MySQL built with '%s' to have it working",
 "The MySQL server is running with the %s option so it cannot execute this statement",
 "Column '%-.100s' has duplicated value '%-.64s' in %s"
-"Truncated wrong %-.32s value: '%-.128s'"
-"Incorrect table definition; There can only be one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause"
+"Truncated incorrect %-.32s value: '%-.128s'"
+"Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause"
 "Invalid ON UPDATE clause for '%-.64s' field",
 "This command is not supported in the prepared statement protocol yet",
 "Got error %d '%-.100s' from %s",
diff --git a/sql/share/estonian/errmsg.txt b/sql/share/estonian/errmsg.txt
index 122d8f990ab..6eefe4bb852 100644
--- a/sql/share/estonian/errmsg.txt
+++ b/sql/share/estonian/errmsg.txt
@@ -206,11 +206,11 @@ character-set=latin7
 "Tabel '%-.64s' on märgitud vigaseks ja viimane (automaatne?) parandus ebaõnnestus",
 "Hoiatus: mõnesid transaktsioone mittetoetavaid tabeleid ei suudetud tagasi kerida",
 "Mitme lausendiga transaktsioon nõudis rohkem ruumi kui lubatud 'max_binlog_cache_size' muutujaga. Suurenda muutuja väärtust ja proovi uuesti",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "Kasutajal %-.64s on juba rohkem ühendusi kui lubatud 'max_user_connections' muutujaga",
 "Ainult konstantsed suurused on lubatud SET klauslis",
 "Kontrollaeg ületatud luku järel ootamisel; Proovi transaktsiooni otsast alata",
@@ -235,20 +235,20 @@ character-set=latin7
 "Transaktsioone toetavate ning mittetoetavate tabelite kooskasutamine ei ole lubatud",
 "Määrangut '%s' on lauses kasutatud topelt",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -256,21 +256,21 @@ character-set=latin7
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -282,11 +282,11 @@ character-set=latin7
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/french/errmsg.txt b/sql/share/french/errmsg.txt
index 200edc44cd2..c506674f65f 100644
--- a/sql/share/french/errmsg.txt
+++ b/sql/share/french/errmsg.txt
@@ -224,26 +224,26 @@ character-set=latin1
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -251,21 +251,21 @@ character-set=latin1
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -277,11 +277,11 @@ character-set=latin1
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/greek/errmsg.txt b/sql/share/greek/errmsg.txt
index 2d742551b59..893780cb0a0 100644
--- a/sql/share/greek/errmsg.txt
+++ b/sql/share/greek/errmsg.txt
@@ -200,23 +200,23 @@ character-set=greek
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -224,26 +224,26 @@ character-set=greek
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -251,21 +251,21 @@ character-set=greek
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -277,11 +277,11 @@ character-set=greek
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/hungarian/errmsg.txt b/sql/share/hungarian/errmsg.txt
index 0b1a6fe2777..6d90e68084c 100644
--- a/sql/share/hungarian/errmsg.txt
+++ b/sql/share/hungarian/errmsg.txt
@@ -202,23 +202,23 @@ character-set=latin2
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -226,26 +226,26 @@ character-set=latin2
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -253,21 +253,21 @@ character-set=latin2
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -279,11 +279,11 @@ character-set=latin2
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/italian/errmsg.txt b/sql/share/italian/errmsg.txt
index 0f79ec8c953..c1d5bdb0db3 100644
--- a/sql/share/italian/errmsg.txt
+++ b/sql/share/italian/errmsg.txt
@@ -242,8 +242,8 @@ character-set=latin1
 "Errore fatale %d: '%-.128s' dal master leggendo i dati dal log binario",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -251,21 +251,21 @@ character-set=latin1
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -277,11 +277,11 @@ character-set=latin1
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/japanese/errmsg.txt b/sql/share/japanese/errmsg.txt
index 375efc6dea0..094622a49cd 100644
--- a/sql/share/japanese/errmsg.txt
+++ b/sql/share/japanese/errmsg.txt
@@ -75,7 +75,7 @@ character-set=ujis
 "Invalid default value for '%-.64s'",
 "Ê£¿ô¤Î primary key ¤¬ÄêµÁ¤µ¤ì¤Þ¤·¤¿",
 "key ¤Î»ØÄ꤬¿¤¹¤®¤Þ¤¹.  key ¤ÏºÇÂç %d ¤Þ¤Ç¤Ç¤¹",
-"Too many key parts specified. Max %d parts allowed",
+"Too many key parts specified; max %d parts allowed",
 "key ¤¬Ä¹¤¹¤®¤Þ¤¹. key ¤ÎŤµ¤ÏºÇÂç %d ¤Ç¤¹",
 "Key column '%-.64s' ¤¬¥Æ¡¼¥Ö¥ë¤Ë¤¢¤ê¤Þ¤»¤ó.",
 "BLOB column '%-.64s' can't be used in key specification with the used table type",
@@ -202,23 +202,23 @@ character-set=ujis
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -226,26 +226,26 @@ character-set=ujis
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -253,21 +253,21 @@ character-set=ujis
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -279,11 +279,11 @@ character-set=ujis
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/korean/errmsg.txt b/sql/share/korean/errmsg.txt
index 7bbed0e9b0c..61cc50a3aa9 100644
--- a/sql/share/korean/errmsg.txt
+++ b/sql/share/korean/errmsg.txt
@@ -200,23 +200,23 @@ character-set=euckr
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -224,26 +224,26 @@ character-set=euckr
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -251,21 +251,21 @@ character-set=euckr
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -277,11 +277,11 @@ character-set=euckr
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/norwegian-ny/errmsg.txt b/sql/share/norwegian-ny/errmsg.txt
index 8df547d38fe..e6b047daab7 100644
--- a/sql/share/norwegian-ny/errmsg.txt
+++ b/sql/share/norwegian-ny/errmsg.txt
@@ -202,23 +202,23 @@ character-set=latin1
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -226,26 +226,26 @@ character-set=latin1
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -253,21 +253,21 @@ character-set=latin1
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -279,11 +279,11 @@ character-set=latin1
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/norwegian/errmsg.txt b/sql/share/norwegian/errmsg.txt
index 262e67f4a6e..e031c83c6d4 100644
--- a/sql/share/norwegian/errmsg.txt
+++ b/sql/share/norwegian/errmsg.txt
@@ -202,23 +202,23 @@ character-set=latin1
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -226,26 +226,26 @@ character-set=latin1
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -253,21 +253,21 @@ character-set=latin1
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -279,11 +279,11 @@ character-set=latin1
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/polish/errmsg.txt b/sql/share/polish/errmsg.txt
index 4c11ea0e73b..0441bbc550a 100644
--- a/sql/share/polish/errmsg.txt
+++ b/sql/share/polish/errmsg.txt
@@ -114,8 +114,8 @@ character-set=latin2
 "Operacja SELECT bêdzie dotyczy³a zbyt wielu rekordów i prawdopodobnie zajmie bardzo du¿o czasu. Sprawd¥ warunek WHERE i u¿yj SQL_OPTION BIG_SELECTS=1 je?li operacja SELECT jest poprawna",
 "Unknown error",
 "Unkown procedure %s",
-"Wrong parameter count to procedure %s",
-"Wrong parameters to procedure %s",
+"Incorrect parameter count to procedure %s",
+"Incorrect parameters to procedure %s",
 "Unknown table '%-.64s' in %s",
 "Field '%-.64s' specified twice",
 "Invalid use of group function",
@@ -204,23 +204,23 @@ character-set=latin2
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -228,26 +228,26 @@ character-set=latin2
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -255,21 +255,21 @@ character-set=latin2
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -281,11 +281,11 @@ character-set=latin2
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/portuguese/errmsg.txt b/sql/share/portuguese/errmsg.txt
index 2175bee9474..537fe06f55a 100644
--- a/sql/share/portuguese/errmsg.txt
+++ b/sql/share/portuguese/errmsg.txt
@@ -254,7 +254,7 @@ character-set=latin1
 "Referência '%-.64s' não suportada (%s)",
 "Cada tabela derivada deve ter seu próprio alias",
 "Select %u foi reduzido durante otimização",
-"Tabela '%-.64s' de um dos SELECT's não pode ser usada em %-.32s",
+"Tabela '%-.64s' de um dos SELECTs não pode ser usada em %-.32s",
 "Cliente não suporta o protocolo de autenticação exigido pelo servidor; considere a atualização do cliente MySQL",
 "Todas as partes de uma SPATIAL KEY devem ser NOT NULL",
 "COLLATION '%s' não é válida para CHARACTER SET '%s'",
diff --git a/sql/share/romanian/errmsg.txt b/sql/share/romanian/errmsg.txt
index 78539c22d99..d93dada98e3 100644
--- a/sql/share/romanian/errmsg.txt
+++ b/sql/share/romanian/errmsg.txt
@@ -204,23 +204,23 @@ character-set=latin2
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
-"This operation cannot be performed with a running slave, run STOP SLAVE first",
-"This operation requires a running slave, configure slave and do START SLAVE",
-"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
-"Could not initialize master info structure, more error messages can be found in the MySQL error log",
-"Could not create slave thread, check system resources",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
+"This operation cannot be performed with a running slave; run STOP SLAVE first",
+"This operation requires a running slave; configure slave and do START SLAVE",
+"The server is not configured as slave; fix in config file or with CHANGE MASTER TO",
+"Could not initialize master info structure; more error messages can be found in the MySQL error log",
+"Could not create slave thread; check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -228,26 +228,26 @@ character-set=latin2
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -255,21 +255,21 @@ character-set=latin2
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -281,11 +281,11 @@ character-set=latin2
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/russian/errmsg.txt b/sql/share/russian/errmsg.txt
index 7d7a1fd4a20..ecff0fc8afd 100644
--- a/sql/share/russian/errmsg.txt
+++ b/sql/share/russian/errmsg.txt
@@ -244,8 +244,8 @@ character-set=koi8r
 "ðÏÌÕÞÅÎÁ ÎÅÉÓÐÒÁ×ÉÍÁÑ ÏÛÉÂËÁ %d: '%-.128s' ÏÔ ÇÏÌÏ×ÎÏÇÏ ÓÅÒ×ÅÒÁ × ÐÒÏÃÅÓÓÅ ×ÙÂÏÒËÉ ÄÁÎÎÙÈ ÉÚ Ä×ÏÉÞÎÏÇÏ ÖÕÒÎÁÌÁ",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "ïÐÅÒÁÎÄ ÄÏÌÖÅÎ ÓÏÄÅÒÖÁÔØ %d ËÏÌÏÎÏË",
 "ðÏÄÚÁÐÒÏÓ ×ÏÚ×ÒÁÝÁÅÔ ÂÏÌÅÅ ÏÄÎÏÊ ÚÁÐÉÓÉ",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -253,21 +253,21 @@ character-set=koi8r
 "ãÉËÌÉÞÅÓËÁÑ ÓÓÙÌËÁ ÎÁ ÐÏÄÚÁÐÒÏÓ",
 "ðÒÅÏÂÒÁÚÏ×ÁÎÉÅ ÐÏÌÑ '%s' ÉÚ %s × %s",
 "óÓÙÌËÁ '%-.64s' ÎÅ ÐÏÄÄÅÒÖÉ×ÁÅÔÓÑ (%s)",
-"Every derived table must have it's own alias",
+"Every derived table must have its own alias",
 "Select %u ÂÙÌ ÕÐÒÁÚÄÎÅÎ × ÐÒÏÃÅÓÓÅ ÏÐÔÉÍÉÚÁÃÉÉ",
-"Table '%-.64s' from one of SELECT's can not be used in %-.32s",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -279,11 +279,11 @@ character-set=koi8r
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "óÅÒ×ÅÒ ÚÁÐÕÝÅÎ × ÒÅÖÉÍÅ --secure-auth (ÂÅÚÏÐÁÓÎÏÊ Á×ÔÏÒÉÚÁÃÉÉ), ÎÏ ÄÌÑ ÐÏÌØÚÏ×ÁÔÅÌÑ '%s'@'%s' ÐÁÒÏÌØ ÓÏÈÒÁÎ£Î × ÓÔÁÒÏÍ ÆÏÒÍÁÔÅ; ÎÅÏÂÈÏÄÉÍÏ ÏÂÎÏ×ÉÔØ ÆÏÒÍÁÔ ÐÁÒÏÌÑ",
 "ðÏÌÅ ÉÌÉ ÓÓÙÌËÁ '%-.64s%s%-.64s%s%-.64s' ÉÚ SELECTÁ #%d ÂÙÌÁ ÎÁÊÄÅÎÁ × SELECTÅ #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/serbian/errmsg.txt b/sql/share/serbian/errmsg.txt
index 051417b6c3d..c888b0d438b 100644
--- a/sql/share/serbian/errmsg.txt
+++ b/sql/share/serbian/errmsg.txt
@@ -236,20 +236,20 @@ character-set=cp1250
 "Mešanje tabela koje podržavaju transakcije i onih koje ne podržavaju transakcije je iskljuèeno",
 "Opcija '%s' je upotrebljena dva puta u istom iskazu",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%ld) given to %s",
@@ -257,15 +257,15 @@ character-set=cp1250
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
@@ -283,11 +283,11 @@ character-set=cp1250
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/slovak/errmsg.txt b/sql/share/slovak/errmsg.txt
index 9160d2f7a91..edbc9b50562 100644
--- a/sql/share/slovak/errmsg.txt
+++ b/sql/share/slovak/errmsg.txt
@@ -100,7 +100,7 @@ character-set=latin2
 "Súbor '%-.64s' u¾ existuje",
 "Záznamov: %ld  Zmazaných: %ld  Preskoèených: %ld  Varovania: %ld",
 "Záznamov: %ld  Opakovaných: %ld",
-"Wrong sub part key. The used key part isn't a string or the used length is longer than the key part",
+"Incorrect sub part key. The used key part isn't a string or the used length is longer than the key part",
 "One nemô¾em zmaza» all fields with ALTER TABLE. Use DROP TABLE instead",
 "Nemô¾em zru¹i» (DROP) '%-.64s'. Skontrolujte, èi neexistujú záznamy/kµúèe",
 "Záznamov: %ld  Opakovaných: %ld  Varovania: %ld",
@@ -208,7 +208,7 @@ character-set=latin2
 "Table '%-.64s' is marked as crashed and should be repaired",
 "Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
 "Some non-transactional changed tables couldn't be rolled back",
-"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again",
+"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again",
 "This operation cannot be performed with a running slave, run STOP SLAVE first",
 "This operation requires a running slave, configure slave and do START SLAVE",
 "The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
@@ -216,15 +216,15 @@ character-set=latin2
 "Could not create slave thread, check system resources",
 "User %-.64s has already more than 'max_user_connections' active connections",
 "You may only use constant expressions with SET",
-"Lock wait timeout exceeded",
+"Lock wait timeout exceeded; try restarting transaction",
 "The total number of locks exceeds the lock table size",
 "Update locks cannot be acquired during a READ UNCOMMITTED transaction",
 "DROP DATABASE not allowed while thread is holding global read lock",
 "CREATE DATABASE not allowed while thread is holding global read lock",
-"Wrong arguments to %s",
+"Incorrect arguments to %s",
 "'%-.32s'@'%-.64s' is not allowed to create new users",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "The used table type doesn't support FULLTEXT indexes",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -232,26 +232,26 @@ character-set=latin2
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "Operand should contain %d column(s)",
 "Subquery returns more than 1 row",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -259,21 +259,21 @@ character-set=latin2
 "Cyclic reference on subqueries",
 "Converting column '%s' from %s to %s",
 "Reference '%-.64s' not supported (%s)",
-"Every derived table must have it's own alias",
-"Select %u was reduced during optimisation",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Every derived table must have its own alias",
+"Select %u was reduced during optimization",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -285,11 +285,11 @@ character-set=latin2
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",
diff --git a/sql/share/swedish/errmsg.txt b/sql/share/swedish/errmsg.txt
index f045bae4cf6..9e41839da8e 100644
--- a/sql/share/swedish/errmsg.txt
+++ b/sql/share/swedish/errmsg.txt
@@ -259,13 +259,13 @@ character-set=latin1
 "COLLATION '%s' är inte tillåtet för CHARACTER SET '%s'",
 "Slaven har redan startat",
 "Slaven har redan stoppat",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d rad(er) kapades av group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -277,11 +277,11 @@ character-set=latin1
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "Field or reference '%-.64s%s%-.64s%s%-.64s' of SELECT #%d was resolved in SELECT #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Felaktigt index namn '%-.100s'",
 "Felaktigt katalog namn '%-.100s'",
diff --git a/sql/share/ukrainian/errmsg.txt b/sql/share/ukrainian/errmsg.txt
index 47b003894bd..3f44cfe05a3 100644
--- a/sql/share/ukrainian/errmsg.txt
+++ b/sql/share/ukrainian/errmsg.txt
@@ -221,7 +221,7 @@ character-set=koi8u
 "èÉÂÎÉÊ ÁÒÇÕÍÅÎÔ ÄÌÑ %s",
 "ëÏÒÉÓÔÕ×ÁÞÕ '%-.32s'@'%-.64s' ÎÅ ÄÏÚ×ÏÌÅÎÏ ÓÔ×ÏÒÀ×ÁÔÉ ÎÏ×ÉÈ ËÏÒÉÓÔÕ×ÁÞ¦×",
 "Incorrect table definition; all MERGE tables must be in the same database",
-"Deadlock found when trying to get lock; Try restarting transaction",
+"Deadlock found when trying to get lock; try restarting transaction",
 "÷ÉËÏÒÉÓÔÁÎÉÊ ÔÉÐ ÔÁÂÌÉæ ΊЦÄÔÒÉÍÕ¤ FULLTEXT ¦ÎÄÅËÓ¦×",
 "Cannot add foreign key constraint",
 "Cannot add a child row: a foreign key constraint fails",
@@ -229,26 +229,26 @@ character-set=koi8u
 "Error connecting to master: %-.128s",
 "Error running query on master: %-.128s",
 "Error when executing command %s: %-.128s",
-"Wrong usage of %s and %s",
+"Incorrect usage of %s and %s",
 "The used SELECT statements have a different number of columns",
 "Can't execute the query because you have a conflicting read lock",
 "Mixing of transactional and non-transactional tables is disabled",
 "Option '%s' used twice in statement",
 "User '%-.64s' has exceeded the '%s' resource (current value: %ld)",
-"Access denied. You need the %-.128s privilege for this operation",
+"Access denied; you need the %-.128s privilege for this operation",
 "Variable '%-.64s' is a SESSION variable and can't be used with SET GLOBAL",
 "Variable '%-.64s' is a GLOBAL variable and should be set with SET GLOBAL",
 "Variable '%-.64s' doesn't have a default value",
 "Variable '%-.64s' can't be set to the value of '%-.64s'",
-"Wrong argument type to variable '%-.64s'",
+"Incorrect argument type to variable '%-.64s'",
 "Variable '%-.64s' can only be set, not read",
-"Wrong usage/placement of '%s'",
+"Incorrect usage/placement of '%s'",
 "This version of MySQL doesn't yet support '%s'",
 "Got fatal error %d: '%-.128s' from master when reading data from binary log",
 "Slave SQL thread ignored the query because of replicate-*-table rules",
 "Variable '%-.64s' is a %s variable",
-"Wrong foreign key definition for '%-.64s': %s",
-"Key reference and table reference doesn't match",
+"Incorrect foreign key definition for '%-.64s': %s",
+"Key reference and table reference don't match",
 "ïÐÅÒÁÎÄ ÍÁ¤ ÓËÌÁÄÁÔÉÓÑ Ú %d ÓÔÏ×Âæ×",
 "ð¦ÄÚÁÐÉÔ ÐÏ×ÅÒÔÁ¤ ¦ÌØÛ ÎiÖ 1 ÚÁÐÉÓ",
 "Unknown prepared statement handler (%.*s) given to %s",
@@ -256,21 +256,21 @@ character-set=koi8u
 "ãÉË̦ÞÎÅ ÐÏÓÉÌÁÎÎÑ ÎÁ ЦÄÚÁÐÉÔ",
 "ðÅÒÅÔ×ÏÒÅÎÎÑ ÓÔÏ×ÂÃÁ '%s' Ú %s Õ %s",
 "ðÏÓÉÌÁÎÎÑ '%-.64s' ÎÅ ÐiÄÔÒÉÍÕÅÔÓÑ (%s)",
-"Every derived table must have it's own alias",
+"Every derived table must have its own alias",
 "Select %u was ÓËÁÓÏ×ÁÎÏ ÐÒÉ ÏÐÔÉÍiÚÁÃii",
-"Table '%-.64s' from one of SELECT's can not be used  in %-.32s",
+"Table '%-.64s' from one of SELECTs can not be used in %-.32s",
 "Client does not support authentication protocol requested by server; consider upgrading MySQL client",
 "All parts of a SPATIAL KEY must be NOT NULL",
 "COLLATION '%s' is not valid for CHARACTER SET '%s'",
 "Slave is already running",
 "Slave has already been stopped",
-"Too big size of uncompressed data. The maximum size is %d. (probably, length of uncompressed data was corrupted)",
+"Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)",
 "Z_MEM_ERROR: Not enough memory available for zlib",
 "Z_BUF_ERROR: Not enough room in the output buffer for zlib (probably, length of uncompressed data was corrupted)",
 "Z_DATA_ERROR: Input data was corrupted for zlib",
 "%d line(s) was(were) cut by group_concat()",
 "Row %ld doesn't contain data for all columns",
-"Row %ld was truncated; It contained more data than there were input columns",
+"Row %ld was truncated; it contained more data than there were input columns",
 "Data truncated, NULL supplied to NOT NULL column '%s' at row %ld",
 "Data truncated, out of range for column '%s' at row %ld",
 "Data truncated for column '%s' at row %ld",
@@ -282,11 +282,11 @@ character-set=koi8u
 "Illegal mix of collations for operation '%s'",
 "Variable '%-.64s' is not a variable component (Can't be used as XXXX.variable_name)",
 "Unknown collation: '%-.64s'",
-"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later when MySQL slave with SSL will be started",
+"SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started",
 "Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format",
 "óÔÏ×ÂÅÃØ ÁÂÏ ÐÏÓÉÌÁÎÎÑ '%-.64s%s%-.64s%s%-.64s' ¦Ú SELECTÕ #%d ÂÕÌÏ ÚÎÁÊÄÅÎÅ Õ SELECT¦ #%d",
-"Wrong parameter or combination of parameters for START SLAVE UNTIL",
-"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL, otherwise you are not safe in case of unexpected slave's mysqld restart",
+"Incorrect parameter or combination of parameters for START SLAVE UNTIL",
+"It is recommended to run with --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you are not safe in case of unexpected slave's mysqld restart",
 "SQL thread is not to be started so UNTIL options are ignored",
 "Incorrect index name '%-.100s'",
 "Incorrect catalog name '%-.100s'",