diff options
author | Oleksandr Byelkin <sanja@mariadb.com> | 2022-07-21 15:27:25 +0200 |
---|---|---|
committer | Oleksandr Byelkin <sanja@mariadb.com> | 2022-07-21 15:27:25 +0200 |
commit | 3fb50da076be245ab64ec0b1dc302c701dc42286 (patch) | |
tree | 01bace3dda710272adf1a88cb542e9563c5f503a /zlib/inffast.c | |
download | mariadb-git-3fb50da076be245ab64ec0b1dc302c701dc42286.tar.gz |
1.2.11
Diffstat (limited to 'zlib/inffast.c')
-rw-r--r-- | zlib/inffast.c | 323 |
1 files changed, 323 insertions, 0 deletions
diff --git a/zlib/inffast.c b/zlib/inffast.c new file mode 100644 index 00000000000..0dbd1dbc09f --- /dev/null +++ b/zlib/inffast.c @@ -0,0 +1,323 @@ +/* inffast.c -- fast decoding + * Copyright (C) 1995-2017 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +#ifdef ASMINF +# pragma message("Assembler code may have bugs -- use at your own risk") +#else + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ +void ZLIB_INTERNAL inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *in; /* local strm->next_in */ + z_const unsigned char FAR *last; /* have enough input while in < last */ + unsigned char FAR *out; /* local strm->next_out */ + unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ + unsigned char FAR *end; /* while out < end, enough space available */ +#ifdef INFLATE_STRICT + unsigned dmax; /* maximum distance from zlib header */ +#endif + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned wnext; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ + unsigned long hold; /* local strm->hold */ + unsigned bits; /* local strm->bits */ + code const FAR *lcode; /* local strm->lencode */ + code const FAR *dcode; /* local strm->distcode */ + unsigned lmask; /* mask for first level of length codes */ + unsigned dmask; /* mask for first level of distance codes */ + code here; /* retrieved table entry */ + unsigned op; /* code bits, operation, extra bits, or */ + /* window position, window bytes to copy */ + unsigned len; /* match length, unused bytes */ + unsigned dist; /* match distance */ + unsigned char FAR *from; /* where to copy match from */ + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + in = strm->next_in; + last = in + (strm->avail_in - 5); + out = strm->next_out; + beg = out - (start - strm->avail_out); + end = out + (strm->avail_out - 257); +#ifdef INFLATE_STRICT + dmax = state->dmax; +#endif + wsize = state->wsize; + whave = state->whave; + wnext = state->wnext; + window = state->window; + hold = state->hold; + bits = state->bits; + lcode = state->lencode; + dcode = state->distcode; + lmask = (1U << state->lenbits) - 1; + dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + do { + if (bits < 15) { + hold += (unsigned long)(*in++) << bits; + bits += 8; + hold += (unsigned long)(*in++) << bits; + bits += 8; + } + here = lcode[hold & lmask]; + dolen: + op = (unsigned)(here.bits); + hold >>= op; + bits -= op; + op = (unsigned)(here.op); + if (op == 0) { /* literal */ + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + *out++ = (unsigned char)(here.val); + } + else if (op & 16) { /* length base */ + len = (unsigned)(here.val); + op &= 15; /* number of extra bits */ + if (op) { + if (bits < op) { + hold += (unsigned long)(*in++) << bits; + bits += 8; + } + len += (unsigned)hold & ((1U << op) - 1); + hold >>= op; + bits -= op; + } + Tracevv((stderr, "inflate: length %u\n", len)); + if (bits < 15) { + hold += (unsigned long)(*in++) << bits; + bits += 8; + hold += (unsigned long)(*in++) << bits; + bits += 8; + } + here = dcode[hold & dmask]; + dodist: + op = (unsigned)(here.bits); + hold >>= op; + bits -= op; + op = (unsigned)(here.op); + if (op & 16) { /* distance base */ + dist = (unsigned)(here.val); + op &= 15; /* number of extra bits */ + if (bits < op) { + hold += (unsigned long)(*in++) << bits; + bits += 8; + if (bits < op) { + hold += (unsigned long)(*in++) << bits; + bits += 8; + } + } + dist += (unsigned)hold & ((1U << op) - 1); +#ifdef INFLATE_STRICT + if (dist > dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + hold >>= op; + bits -= op; + Tracevv((stderr, "inflate: distance %u\n", dist)); + op = (unsigned)(out - beg); /* max distance in output */ + if (dist > op) { /* see if copy from window */ + op = dist - op; /* distance back in window */ + if (op > whave) { + if (state->sane) { + strm->msg = + (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + if (len <= op - whave) { + do { + *out++ = 0; + } while (--len); + continue; + } + len -= op - whave; + do { + *out++ = 0; + } while (--op > whave); + if (op == 0) { + from = out - dist; + do { + *out++ = *from++; + } while (--len); + continue; + } +#endif + } + from = window; + if (wnext == 0) { /* very common case */ + from += wsize - op; + if (op < len) { /* some from window */ + len -= op; + do { + *out++ = *from++; + } while (--op); + from = out - dist; /* rest from output */ + } + } + else if (wnext < op) { /* wrap around window */ + from += wsize + wnext - op; + op -= wnext; + if (op < len) { /* some from end of window */ + len -= op; + do { + *out++ = *from++; + } while (--op); + from = window; + if (wnext < len) { /* some from start of window */ + op = wnext; + len -= op; + do { + *out++ = *from++; + } while (--op); + from = out - dist; /* rest from output */ + } + } + } + else { /* contiguous in window */ + from += wnext - op; + if (op < len) { /* some from window */ + len -= op; + do { + *out++ = *from++; + } while (--op); + from = out - dist; /* rest from output */ + } + } + while (len > 2) { + *out++ = *from++; + *out++ = *from++; + *out++ = *from++; + len -= 3; + } + if (len) { + *out++ = *from++; + if (len > 1) + *out++ = *from++; + } + } + else { + from = out - dist; /* copy direct from output */ + do { /* minimum length is three */ + *out++ = *from++; + *out++ = *from++; + *out++ = *from++; + len -= 3; + } while (len > 2); + if (len) { + *out++ = *from++; + if (len > 1) + *out++ = *from++; + } + } + } + else if ((op & 64) == 0) { /* 2nd level distance code */ + here = dcode[here.val + (hold & ((1U << op) - 1))]; + goto dodist; + } + else { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + } + else if ((op & 64) == 0) { /* 2nd level length code */ + here = lcode[here.val + (hold & ((1U << op) - 1))]; + goto dolen; + } + else if (op & 32) { /* end-of-block */ + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + else { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + } while (in < last && out < end); + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + len = bits >> 3; + in -= len; + bits -= len << 3; + hold &= (1U << bits) - 1; + + /* update state and return */ + strm->next_in = in; + strm->next_out = out; + strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); + strm->avail_out = (unsigned)(out < end ? + 257 + (end - out) : 257 - (out - end)); + state->hold = hold; + state->bits = bits; + return; +} + +/* + inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): + - Using bit fields for code structure + - Different op definition to avoid & for extra bits (do & for table bits) + - Three separate decoding do-loops for direct, window, and wnext == 0 + - Special case for distance > 1 copies to do overlapped load and store copy + - Explicit branch predictions (based on measured branch probabilities) + - Deferring match copy and interspersed it with decoding subsequent codes + - Swapping literal/length else + - Swapping window/direct else + - Larger unrolled copy loops (three is about right) + - Moving len -= 3 statement into middle of loop + */ + +#endif /* !ASMINF */ |