diff options
-rwxr-xr-x | debian/autobake-deb.sh | 110 | ||||
-rw-r--r-- | debian/control | 5 |
2 files changed, 13 insertions, 102 deletions
diff --git a/debian/autobake-deb.sh b/debian/autobake-deb.sh index 21ab4d8fe22..a9715dc30fd 100755 --- a/debian/autobake-deb.sh +++ b/debian/autobake-deb.sh @@ -9,31 +9,7 @@ set -e # On Buildbot, don't run the mysql-test-run test suite as part of build. # It takes a lot of time, and we will do a better test anyway in # Buildbot, running the test suite from installed .debs on a clean VM. -# On Travis-CI we want to simulate the full build, including tests. -# Also on Travis-CI it is useful not to override the DEB_BUILD_OPTIONS -# at this stage at all. -if [[ ! $TRAVIS ]] -then - export DEB_BUILD_OPTIONS="nocheck" -fi - -# Travis-CI optimizations -if [[ $TRAVIS ]] -then - # On Travis-CI, the log must stay under 4MB so make the build less verbose - sed -i -e '/Add support for verbose builds/,+2d' debian/rules - - # Don't include test suite package on Travis-CI to make the build time shorter - sed '/Package: mariadb-test-data/,/^$/d' -i debian/control - sed '/Package: mariadb-test/,/^$/d' -i debian/control - sed '/Package: mariadb-plugin-tokudb/,/^$/d' -i debian/control - sed '/Package: mariadb-plugin-mroonga/,/^$/d' -i debian/control - sed '/Package: mariadb-plugin-spider/,/^$/d' -i debian/control - sed '/Package: mariadb-plugin-oqgraph/,/^$/d' -i debian/control - export MYSQL_COMPILER_LAUNCHER=ccache - sed 's|-DDEB|-DPLUGIN_TOKUDB=NO -DPLUGIN_MROONGA=NO -DPLUGIN_SPIDER=NO -DPLUGIN_OQGRAPH=NO -DPLUGIN_PERFSCHEMA=NO -WITH_EMBEDDED_SERVER=OFF -DDEB|' -i debian/rules -fi - +export DEB_BUILD_OPTIONS="nocheck" # Look up distro-version specific stuff # @@ -41,52 +17,8 @@ fi # Debian policy and targetting Debian Sid. Then case-by-case run in autobake-deb.sh # tests for backwards compatibility and strip away parts on older builders. -# If iproute2 is not available (before Debian Jessie and Ubuntu Trusty) -# fall back to the old iproute package. -if ! apt-cache madison iproute2 | grep 'iproute2 *|' >/dev/null 2>&1 -then - sed 's/iproute2/iproute/' -i debian/control -fi - -# If libcrack2 (>= 2.9.0) is not available (before Debian Jessie and Ubuntu Trusty) -# clean away the cracklib stanzas so the package can build without them. -if ! apt-cache madison libcrack2-dev | grep 'libcrack2-dev *| *2\.9' >/dev/null 2>&1 -then - sed '/libcrack2-dev/d' -i debian/control - sed '/Package: mariadb-plugin-cracklib/,/^$/d' -i debian/control -fi - -# If libpcre3-dev (>= 2:8.35-3.2~) is not available (before Debian Jessie or Ubuntu Wily) -# clean away the PCRE3 stanzas so the package can build without them. -# Update check when version 2:8.40 or newer is available. -if ! apt-cache madison libpcre3-dev | grep 'libpcre3-dev *| *2:8\.3[2-9]' >/dev/null 2>&1 -then - sed '/libpcre3-dev/d' -i debian/control -fi - -# If libsystemd-dev is not available (before Debian Jessie or Ubuntu Wily) -# clean away the systemd stanzas so the package can build without them. -if ! apt-cache madison libsystemd-dev | grep 'libsystemd-dev' >/dev/null 2>&1 -then - sed '/dh-systemd/d' -i debian/control - sed '/libsystemd-dev/d' -i debian/control - sed 's/ --with systemd//' -i debian/rules - sed '/systemd/d' -i debian/rules - sed '/\.service/d' -i debian/rules - sed '/galera_new_cluster/d' -i debian/mariadb-server-10.2.install - sed '/galera_recovery/d' -i debian/mariadb-server-10.2.install - sed '/mariadb-service-convert/d' -i debian/mariadb-server-10.2.install -fi - -# Convert gcc version to numberical value. Format is Mmmpp where M is Major -# version, mm is minor version and p is patch. -# -dumpfullversion & -dumpversion to make it uniform across old and new (>=7) -GCCVERSION=$(gcc -dumpfullversion -dumpversion | sed -e 's/\.\([0-9][0-9]\)/\1/g' \ - -e 's/\.\([0-9]\)/0\1/g' \ - -e 's/^[0-9]\{3,4\}$/&00/') -# Don't build rocksdb package if gcc version is less than 4.8 or we are running on -# x86 32 bit. -if [[ $GCCVERSION -lt 40800 ]] || [[ $(arch) =~ i[346]86 ]] +# Don't build rocksdb package on x86 32 bit. +if [[ $(arch) =~ i[346]86 ]] then sed '/Package: mariadb-plugin-rocksdb/,/^$/d' -i debian/control fi @@ -106,15 +38,6 @@ then sed '/Package: mariadb-plugin-cassandra/,/^$/d' -i debian/control fi -# From Debian Stretch/Ubuntu Bionic onwards dh-systemd is just an empty -# transitional metapackage and the functionality was merged into debhelper. -# In Ubuntu Hirsute is was completely removed, so it can't be referenced anymore. -# Keep using it only on Debian Jessie and Ubuntu Xenial. -if apt-cache madison dh-systemd | grep 'dh-systemd' >/dev/null 2>&1 -then - sed 's/debhelper (>= 9.20160709~),/debhelper (>= 9), dh-systemd,/' -i debian/control -fi - # Adjust changelog, add new version echo "Incrementing changelog and starting build scripts" @@ -133,13 +56,6 @@ dch -b -D ${CODENAME} -v "${EPOCH}${UPSTREAM}${PATCHLEVEL}~${CODENAME}" "Automat echo "Creating package version ${EPOCH}${UPSTREAM}${PATCHLEVEL}~${CODENAME} ... " -# On Travis CI, use -b to build binary only packages as there is no need to -# waste time on generating the source package. -if [[ $TRAVIS ]] -then - BUILDPACKAGE_FLAGS="-b" -fi - # Build the package # Pass -I so that .git and other unnecessary temporary and source control files # will be ignored by dpkg-source when creating the tar.gz source package. @@ -148,17 +64,13 @@ fakeroot dpkg-buildpackage -us -uc -I $BUILDPACKAGE_FLAGS # If the step above fails due to missing dependencies, you can manually run # sudo mk-build-deps debian/control -r -i -# Don't log package contents on Travis-CI to save time and log size -if [[ ! $TRAVIS ]] -then - echo "List package contents ..." - cd .. - for package in `ls *.deb` - do - echo $package | cut -d '_' -f 1 - dpkg-deb -c $package | awk '{print $1 " " $2 " " $6}' | sort -k 3 - echo "------------------------------------------------" - done -fi +echo "List package contents ..." +cd .. +for package in `ls *.deb` +do + echo $package | cut -d '_' -f 1 + dpkg-deb -c $package | awk '{print $1 " " $2 " " $6}' | sort -k 3 + echo "------------------------------------------------" +done echo "Build complete" diff --git a/debian/control b/debian/control index 372abafe205..bcae798e4c1 100644 --- a/debian/control +++ b/debian/control @@ -5,9 +5,8 @@ Maintainer: MariaDB Developers <maria-developers@lists.launchpad.net> Build-Depends: bison, chrpath, cmake (>= 2.7), - debhelper (>= 9.20160709~), + debhelper (>= 10), dh-apparmor, - dh-systemd, dpatch, gdb, libaio-dev [linux-any], @@ -353,7 +352,7 @@ Depends: bsdutils, findutils, galera-3 (>=25.3), gawk, - iproute | iproute2, + iproute2, libdbi-perl, lsb-base (>= 3.0-10), lsof, |