diff options
Diffstat (limited to 'bdb/test/test001.tcl')
| -rw-r--r-- | bdb/test/test001.tcl | 247 |
1 files changed, 0 insertions, 247 deletions
diff --git a/bdb/test/test001.tcl b/bdb/test/test001.tcl deleted file mode 100644 index f0b562bbf24..00000000000 --- a/bdb/test/test001.tcl +++ /dev/null @@ -1,247 +0,0 @@ -# See the file LICENSE for redistribution information. -# -# Copyright (c) 1996-2002 -# Sleepycat Software. All rights reserved. -# -# $Id: test001.tcl,v 11.28 2002/08/08 15:38:11 bostic Exp $ -# -# TEST test001 -# TEST Small keys/data -# TEST Put/get per key -# TEST Dump file -# TEST Close, reopen -# TEST Dump file -# TEST -# TEST Use the first 10,000 entries from the dictionary. -# TEST Insert each with self as key and data; retrieve each. -# TEST After all are entered, retrieve all; compare output to original. -# TEST Close file, reopen, do retrieve and re-verify. -proc test001 { method {nentries 10000} {start 0} {tnum "01"} {noclean 0} args } { - source ./include.tcl - - set args [convert_args $method $args] - set omethod [convert_method $method] - - # Create the database and open the dictionary - set eindex [lsearch -exact $args "-env"] - # - # If we are using an env, then testfile should just be the db name. - # Otherwise it is the test directory and the name. - # If we are not using an external env, then test setting - # the database cache size and using multiple caches. - set txnenv 0 - if { $eindex == -1 } { - set testfile $testdir/test0$tnum.db - append args " -cachesize {0 1048576 3} " - set env NULL - } else { - set testfile test0$tnum.db - incr eindex - set env [lindex $args $eindex] - set txnenv [is_txnenv $env] - if { $txnenv == 1 } { - append args " -auto_commit " - # - # If we are using txns and running with the - # default, set the default down a bit. - # - if { $nentries == 10000 } { - set nentries 100 - } - } - set testdir [get_home $env] - } - puts "Test0$tnum: $method ($args) $nentries equal key/data pairs" - if { $start != 0 } { - # Sadly enough, we are using start in two different ways. - # In test090, it is used to test really big records numbers - # in queue. In replication, it is used to be able to run - # different iterations of this test using different key/data - # pairs. We try to hide all that magic here. - puts "\tStarting at $start" - - if { $tnum != 90 } { - set did [open $dict] - for { set nlines 0 } { [gets $did str] != -1 } \ - { incr nlines} { - } - close $did - if { $start + $nentries > $nlines } { - set start [expr $nlines - $nentries] - } - } - } - - set t1 $testdir/t1 - set t2 $testdir/t2 - set t3 $testdir/t3 - if { $noclean == 0 } { - cleanup $testdir $env - } - set db [eval {berkdb_open \ - -create -mode 0644} $args $omethod $testfile] - error_check_good dbopen [is_valid_db $db] TRUE - set did [open $dict] - - set pflags "" - set gflags "" - set txn "" - - if { [is_record_based $method] == 1 } { - set checkfunc test001_recno.check - append gflags " -recno" - } else { - set checkfunc test001.check - } - puts "\tTest0$tnum.a: put/get loop" - # Here is the loop where we put and get each key/data pair - set count 0 - if { $start != 0 && $tnum != 90 } { - # Skip over "start" entries - for { set count 0 } { $count < $start } { incr count } { - gets $did str - } - set count 0 - } - while { [gets $did str] != -1 && $count < $nentries } { - if { [is_record_based $method] == 1 } { - global kvals - - set key [expr $count + 1 + $start] - if { 0xffffffff > 0 && $key > 0xffffffff } { - set key [expr $key - 0x100000000] - } - if { $key == 0 || $key - 0xffffffff == 1 } { - incr key - incr count - } - set kvals($key) [pad_data $method $str] - } else { - set key $str - set str [reverse $str] - } - if { $txnenv == 1 } { - set t [$env txn] - error_check_good txn [is_valid_txn $t $env] TRUE - set txn "-txn $t" - } - set ret [eval \ - {$db put} $txn $pflags {$key [chop_data $method $str]}] - error_check_good put $ret 0 - if { $txnenv == 1 } { - error_check_good txn [$t commit] 0 - if { $count % 50 == 0 } { - error_check_good txn_checkpoint($count) \ - [$env txn_checkpoint] 0 - } - } - - set ret [eval {$db get} $gflags {$key}] - error_check_good \ - get $ret [list [list $key [pad_data $method $str]]] - - # Test DB_GET_BOTH for success - set ret [$db get -get_both $key [pad_data $method $str]] - error_check_good \ - getboth $ret [list [list $key [pad_data $method $str]]] - - # Test DB_GET_BOTH for failure - set ret [$db get -get_both $key [pad_data $method BAD$str]] - error_check_good getbothBAD [llength $ret] 0 - - incr count - } - close $did - if { $txnenv == 1 } { - set t [$env txn] - error_check_good txn [is_valid_txn $t $env] TRUE - set txn "-txn $t" - } - # Now we will get each key from the DB and compare the results - # to the original. - puts "\tTest0$tnum.b: dump file" - dump_file $db $txn $t1 $checkfunc - # - # dump_file should just have been "get" calls, so - # aborting a get should really be a no-op. Abort - # just for the fun of it. - if { $txnenv == 1 } { - error_check_good txn [$t abort] 0 - } - error_check_good db_close [$db close] 0 - - # Now compare the keys to see if they match the dictionary (or ints) - if { [is_record_based $method] == 1 } { - set oid [open $t2 w] - # If this is test 90, we're checking wrap and we really - # only added nentries number of items starting at start. - # However, if this isn't 90, then we started at start and - # added an addition nentries number of items. - if { $tnum == 90 } { - for {set i 1} {$i <= $nentries} {incr i} { - set j [expr $i + $start] - if { 0xffffffff > 0 && $j > 0xffffffff } { - set j [expr $j - 0x100000000] - } - if { $j == 0 } { - incr i - incr j - } - puts $oid $j - } - } else { - for { set i 1 } { $i <= $nentries + $start } {incr i} { - puts $oid $i - } - } - close $oid - } else { - set q q - # We assume that when this is used with start != 0, the - # test database accumulates data - filehead [expr $nentries + $start] $dict $t2 - } - filesort $t2 $t3 - file rename -force $t3 $t2 - filesort $t1 $t3 - - error_check_good Test0$tnum:diff($t3,$t2) \ - [filecmp $t3 $t2] 0 - - puts "\tTest0$tnum.c: close, open, and dump file" - # Now, reopen the file and run the last test again. - open_and_dump_file $testfile $env $t1 $checkfunc \ - dump_file_direction "-first" "-next" - if { [string compare $omethod "-recno"] != 0 } { - filesort $t1 $t3 - } - - error_check_good Test0$tnum:diff($t2,$t3) \ - [filecmp $t2 $t3] 0 - - # Now, reopen the file and run the last test again in the - # reverse direction. - puts "\tTest0$tnum.d: close, open, and dump file in reverse direction" - open_and_dump_file $testfile $env $t1 $checkfunc \ - dump_file_direction "-last" "-prev" - - if { [string compare $omethod "-recno"] != 0 } { - filesort $t1 $t3 - } - - error_check_good Test0$tnum:diff($t3,$t2) \ - [filecmp $t3 $t2] 0 -} - -# Check function for test001; keys and data are identical -proc test001.check { key data } { - error_check_good "key/data mismatch" $data [reverse $key] -} - -proc test001_recno.check { key data } { - global dict - global kvals - - error_check_good key"$key"_exists [info exists kvals($key)] 1 - error_check_good "key/data mismatch, key $key" $data $kvals($key) -} |