diff options
Diffstat (limited to 'mysql-test/suite/binlog/include/binlog_xa_recover.inc')
| -rw-r--r-- | mysql-test/suite/binlog/include/binlog_xa_recover.inc | 280 |
1 files changed, 0 insertions, 280 deletions
diff --git a/mysql-test/suite/binlog/include/binlog_xa_recover.inc b/mysql-test/suite/binlog/include/binlog_xa_recover.inc deleted file mode 100644 index 9e0906c90f0..00000000000 --- a/mysql-test/suite/binlog/include/binlog_xa_recover.inc +++ /dev/null @@ -1,280 +0,0 @@ -# -# This include file is used by more than one test suite -# (currently binlog and binlog_encryption). -# Please check all dependent tests after modifying it -# - ---source include/have_innodb.inc ---source include/have_debug.inc ---source include/have_debug_sync.inc ---source include/have_binlog_format_row.inc -# Valgrind does not work well with test that crashes the server ---source include/not_valgrind.inc - -# (We do not need to restore these settings, as we crash the server). -SET GLOBAL max_binlog_size= 4096; -SET GLOBAL innodb_flush_log_at_trx_commit= 1; -RESET MASTER; - -CREATE TABLE t1 (a INT PRIMARY KEY, b MEDIUMTEXT) ENGINE=Innodb; -# Insert some data to force a couple binlog rotations (3), so we get some -# normal binlog checkpoints before starting the test. -INSERT INTO t1 VALUES (100, REPEAT("x", 4100)); -# Wait for the master-bin.000002 binlog checkpoint to appear. ---let $wait_for_all= 0 ---let $show_statement= SHOW BINLOG EVENTS IN "master-bin.000002" ---let $field= Info ---let $condition= = "master-bin.000002" ---source include/wait_show_condition.inc -INSERT INTO t1 VALUES (101, REPEAT("x", 4100)); ---let $wait_for_all= 0 ---let $show_statement= SHOW BINLOG EVENTS IN "master-bin.000003" ---let $field= Info ---let $condition= = "master-bin.000003" ---source include/wait_show_condition.inc -INSERT INTO t1 VALUES (102, REPEAT("x", 4100)); ---let $wait_for_all= 0 ---let $show_statement= SHOW BINLOG EVENTS IN "master-bin.000004" ---let $field= Info ---let $condition= = "master-bin.000004" ---source include/wait_show_condition.inc - -# Now start a bunch of transactions that span multiple binlog -# files. Leave then in the state prepared-but-not-committed in the engine -# and crash the server. Check that crash recovery is able to recover all -# of them. -# -# We use debug_sync to get all the transactions into the prepared state before -# we commit any of them. This is because the prepare step flushes the InnoDB -# redo log - including any commits made before, so recovery would become -# unnecessary, decreasing the value of this test. -# -# We arrange to have con1 with a prepared transaction in master-bin.000004, -# con2 and con3 with a prepared transaction in master-bin.000005, and a new -# empty master-bin.000006. So the latest binlog checkpoint should be -# master-bin.000006. - -connect(con1,localhost,root,,); -# First wait after prepare and before write to binlog. -SET DEBUG_SYNC= "ha_commit_trans_before_log_and_order SIGNAL con1_wait WAIT_FOR con1_cont"; -# Then complete InnoDB commit in memory (but not commit checkpoint / write to -# disk), and hang until crash, leaving a transaction to be XA recovered. -SET DEBUG_SYNC= "commit_after_group_release_commit_ordered SIGNAL con1_ready WAIT_FOR _ever"; -send INSERT INTO t1 VALUES (1, REPEAT("x", 4100)); - -connection default; -SET DEBUG_SYNC= "now WAIT_FOR con1_wait"; - -connect(con2,localhost,root,,); -SET DEBUG_SYNC= "ha_commit_trans_before_log_and_order SIGNAL con2_wait WAIT_FOR con2_cont"; -SET DEBUG_SYNC= "commit_after_group_release_commit_ordered SIGNAL con2_ready WAIT_FOR _ever"; -send INSERT INTO t1 VALUES (2, NULL); - -connection default; -SET DEBUG_SYNC= "now WAIT_FOR con2_wait"; - -connect(con3,localhost,root,,); -SET DEBUG_SYNC= "ha_commit_trans_before_log_and_order SIGNAL con3_wait WAIT_FOR con3_cont"; -SET DEBUG_SYNC= "commit_after_group_release_commit_ordered SIGNAL con3_ready WAIT_FOR _ever"; -send INSERT INTO t1 VALUES (3, REPEAT("x", 4100)); - -connection default; -SET DEBUG_SYNC= "now WAIT_FOR con3_wait"; - -connect(con4,localhost,root,,); -SET DEBUG_SYNC= "ha_commit_trans_before_log_and_order SIGNAL con4_wait WAIT_FOR con4_cont"; -SET SESSION debug_dbug="+d,crash_commit_after_log"; -send INSERT INTO t1 VALUES (4, NULL); - -connection default; -SET DEBUG_SYNC= "now WAIT_FOR con4_wait"; - -SET DEBUG_SYNC= "now SIGNAL con1_cont"; -SET DEBUG_SYNC= "now WAIT_FOR con1_ready"; -SET DEBUG_SYNC= "now SIGNAL con2_cont"; -SET DEBUG_SYNC= "now WAIT_FOR con2_ready"; -SET DEBUG_SYNC= "now SIGNAL con3_cont"; -SET DEBUG_SYNC= "now WAIT_FOR con3_ready"; - -# Check that everything is committed in binary log. ---source include/show_binary_logs.inc ---let $binlog_file= master-bin.000003 ---let $binlog_start= 4 ---source include/show_binlog_events.inc ---let $binlog_file= master-bin.000004 ---source include/show_binlog_events.inc ---let $binlog_file= master-bin.000005 ---source include/show_binlog_events.inc ---let $binlog_file= master-bin.000006 ---source include/show_binlog_events.inc - - -# Check that server will not purge too much. -PURGE BINARY LOGS TO "master-bin.000006"; ---source include/show_binary_logs.inc - -# Now crash the server with one more transaction in prepared state. ---write_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect -wait-binlog_xa_recover.test -EOF ---error 0,2006,2013 -SET DEBUG_SYNC= "now SIGNAL con4_cont"; -connection con4; ---error 2006,2013 -reap; - ---append_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect -restart-group_commit_binlog_pos.test -EOF - -connection default; ---enable_reconnect ---source include/wait_until_connected_again.inc - -# Check that all transactions are recovered. -SELECT a FROM t1 ORDER BY a; - ---echo Test that with multiple binlog checkpoints, recovery starts from the last one. -SET GLOBAL max_binlog_size= 4096; -SET GLOBAL innodb_flush_log_at_trx_commit= 1; -RESET MASTER; - -# Rotate to binlog master-bin.000003 while delaying binlog checkpoints. -# So we get multiple binlog checkpoints in master-bin.000003. -# Then complete the checkpoints, crash, and check that we only scan -# the necessary binlog file (ie. that we use the _last_ checkpoint). - -connect(con10,localhost,root,,); -SET DEBUG_SYNC= "commit_after_group_release_commit_ordered SIGNAL con10_ready WAIT_FOR con10_cont"; -send INSERT INTO t1 VALUES (10, REPEAT("x", 4100)); - -connection default; -SET DEBUG_SYNC= "now WAIT_FOR con10_ready"; - -connect(con11,localhost,root,,); -SET DEBUG_SYNC= "commit_after_group_release_commit_ordered SIGNAL con11_ready WAIT_FOR con11_cont"; -send INSERT INTO t1 VALUES (11, REPEAT("x", 4100)); - -connection default; -SET DEBUG_SYNC= "now WAIT_FOR con11_ready"; - -connect(con12,localhost,root,,); -SET DEBUG_SYNC= "commit_after_group_release_commit_ordered SIGNAL con12_ready WAIT_FOR con12_cont"; -send INSERT INTO t1 VALUES (12, REPEAT("x", 4100)); - -connection default; -SET DEBUG_SYNC= "now WAIT_FOR con12_ready"; -INSERT INTO t1 VALUES (13, NULL); - ---source include/show_binary_logs.inc ---let $binlog_file= master-bin.000004 ---let $binlog_start= 4 ---source include/show_binlog_events.inc - -SET DEBUG_SYNC= "now SIGNAL con10_cont"; -connection con10; -reap; -connection default; - -# We need to sync the test case with the background processing of the -# commit checkpoint, otherwise we get nondeterministic results. -SET @old_dbug= @@global.DEBUG_DBUG; -SET GLOBAL debug_dbug="+d,binlog_background_checkpoint_processed"; -SET DEBUG_SYNC= "now WAIT_FOR binlog_background_checkpoint_processed"; -SET DEBUG_SYNC= "now SIGNAL con12_cont"; -connection con12; -reap; -connection default; -SET GLOBAL debug_dbug= @old_dbug; - -SET DEBUG_SYNC= "now SIGNAL con11_cont"; -connection con11; -reap; - -connection default; -# Wait for the last (master-bin.000004) binlog checkpoint to appear. ---let $wait_for_all= 0 ---let $show_statement= SHOW BINLOG EVENTS IN "master-bin.000004" ---let $field= Info ---let $condition= = "master-bin.000004" ---source include/wait_show_condition.inc - ---echo Checking that master-bin.000004 is the last binlog checkpoint ---source include/show_binlog_events.inc - ---echo Now crash the server -# It is not too easy to test XA recovery, as it runs early during server -# startup, before any connections can be made. -# What we do is set a DBUG error insert which will crash if XA recovery -# starts from any other binlog than master-bin.000004 (check the file -# binlog_xa_recover-master.opt). Then we will fail here if XA recovery -# would start from the wrong place. ---write_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect -wait-binlog_xa_recover.test -EOF -SET SESSION debug_dbug="+d,crash_commit_after_log"; ---error 2006,2013 -INSERT INTO t1 VALUES (14, NULL); - ---append_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect -restart-group_commit_binlog_pos.test -EOF - -connection default; ---enable_reconnect ---source include/wait_until_connected_again.inc - -# Check that all transactions are recovered. -SELECT a FROM t1 ORDER BY a; - - ---echo *** Check that recovery works if we crashed early during rotate, before ---echo *** binlog checkpoint event could be written. - -SET GLOBAL max_binlog_size= 4096; -SET GLOBAL innodb_flush_log_at_trx_commit= 1; -RESET MASTER; - -# We need some initial data to reach binlog master-bin.000004. Otherwise -# crash recovery fails due to the error insert used for previous test. -INSERT INTO t1 VALUES (21, REPEAT("x", 4100)); -INSERT INTO t1 VALUES (22, REPEAT("x", 4100)); -# Wait for the master-bin.000003 binlog checkpoint to appear. ---let $wait_for_all= 0 ---let $show_statement= SHOW BINLOG EVENTS IN "master-bin.000003" ---let $field= Info ---let $condition= = "master-bin.000003" ---source include/wait_show_condition.inc -INSERT INTO t1 VALUES (23, REPEAT("x", 4100)); -# Wait for the last (master-bin.000004) binlog checkpoint to appear. ---let $wait_for_all= 0 ---let $show_statement= SHOW BINLOG EVENTS IN "master-bin.000004" ---let $field= Info ---let $condition= = "master-bin.000004" ---source include/wait_show_condition.inc - ---write_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect -wait-binlog_xa_recover.test -EOF -SET SESSION debug_dbug="+d,crash_before_write_checkpoint_event"; ---error 2006,2013 -INSERT INTO t1 VALUES (24, REPEAT("x", 4100)); - ---append_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect -restart-group_commit_binlog_pos.test -EOF - ---enable_reconnect ---source include/wait_until_connected_again.inc - -# Check that all transactions are recovered. -SELECT a FROM t1 ORDER BY a; - ---source include/show_binary_logs.inc ---let $binlog_file= master-bin.000004 ---let $binlog_start= 4 ---source include/show_binlog_events.inc - -# Cleanup -connection default; -DROP TABLE t1; |