diff options
Diffstat (limited to 'mysql-test/suite/rpl/include/rpl_gtid_basic.inc')
| -rw-r--r-- | mysql-test/suite/rpl/include/rpl_gtid_basic.inc | 572 |
1 files changed, 0 insertions, 572 deletions
diff --git a/mysql-test/suite/rpl/include/rpl_gtid_basic.inc b/mysql-test/suite/rpl/include/rpl_gtid_basic.inc deleted file mode 100644 index 68a5d05ffe9..00000000000 --- a/mysql-test/suite/rpl/include/rpl_gtid_basic.inc +++ /dev/null @@ -1,572 +0,0 @@ -# -# This include file is used by more than one test suite -# (currently rpl and binlog_encryption). -# Please check all dependent tests after modifying it -# - ---source include/have_innodb.inc ---let $rpl_topology=1->2->3->4 ---source include/rpl_init.inc - -# Set up a 4-deep replication topology, then test various fail-overs -# using GTID. -# -# A -> B -> C -> D - -connection server_1; ---source include/wait_for_binlog_checkpoint.inc ---let $binlog_file = query_get_value(SHOW MASTER STATUS,File,1) ---let $binlog_pos = query_get_value(SHOW MASTER STATUS,Position,1) ---echo *** GTID position should be empty here *** ---replace_result $binlog_file <BINLOG_FILE> $binlog_pos <BINLOG_POS> -eval SELECT BINLOG_GTID_POS('$binlog_file',$binlog_pos); - -CREATE TABLE t1 (a INT PRIMARY KEY, b VARCHAR(10)) ENGINE=MyISAM; -CREATE TABLE t2 (a INT PRIMARY KEY, b VARCHAR(10)) ENGINE=InnoDB; -INSERT INTO t1 VALUES (1, "m1"); -INSERT INTO t1 VALUES (2, "m2"), (3, "m3"), (4, "m4"); -INSERT INTO t2 VALUES (1, "i1"); -BEGIN; -INSERT INTO t2 VALUES (2, "i2"), (3, "i3"); -INSERT INTO t2 VALUES (4, "i4"); -COMMIT; -save_master_pos; -source include/wait_for_binlog_checkpoint.inc; ---let $binlog_file = query_get_value(SHOW MASTER STATUS,File,1) ---let $binlog_pos = query_get_value(SHOW MASTER STATUS,Position,1) ---let $gtid_pos_server_1 = `SELECT @@gtid_binlog_pos` ---echo *** GTID position should be non-empty here *** ---replace_result $binlog_file <BINLOG_FILE> $binlog_pos <BINLOG_POS> $gtid_pos_server_1 <GTID_POS_SERVER_1> -eval SELECT BINLOG_GTID_POS('$binlog_file',$binlog_pos); - -connection server_2; -sync_with_master; -source include/wait_for_binlog_checkpoint.inc; ---let $binlog_file = query_get_value(SHOW MASTER STATUS,File,1) ---let $binlog_pos = query_get_value(SHOW MASTER STATUS,Position,1) ---echo *** GTID position should be the same as on server_1 *** ---replace_result $binlog_file <BINLOG_FILE> $binlog_pos <BINLOG_POS> $gtid_pos_server_1 <GTID_POS_SERVER_1> -eval SELECT BINLOG_GTID_POS('$binlog_file',$binlog_pos); -SELECT * FROM t1 ORDER BY a; -SELECT * FROM t2 ORDER BY a; -save_master_pos; - -connection server_3; -sync_with_master; -SELECT * FROM t1 ORDER BY a; -SELECT * FROM t2 ORDER BY a; -save_master_pos; - -connection server_4; -sync_with_master; -SELECT * FROM t1 ORDER BY a; -SELECT * FROM t2 ORDER BY a; - - ---echo *** Now take out D, let it fall behind a bit, and then test re-attaching it to A *** -connection server_4; ---source include/stop_slave.inc - -connection server_1; -INSERT INTO t1 VALUES (5, "m1a"); -INSERT INTO t2 VALUES (5, "i1a"); -save_master_pos; - -connection server_4; ---replace_result $MASTER_MYPORT MASTER_PORT -eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $MASTER_MYPORT, - MASTER_USE_GTID=CURRENT_POS; ---source include/start_slave.inc -sync_with_master; -SELECT * FROM t1 ORDER BY a; -SELECT * FROM t2 ORDER BY a; - ---echo *** Now move B to D (C is still replicating from B) *** -connection server_2; ---source include/stop_slave.inc ---replace_result $SERVER_MYPORT_4 SERVER_MYPORT_4 -eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SERVER_MYPORT_4, - MASTER_USE_GTID=CURRENT_POS; ---source include/start_slave.inc - -connection server_4; -UPDATE t2 SET b="j1a" WHERE a=5; -save_master_pos; - -connection server_2; -sync_with_master; -SELECT * FROM t1 ORDER BY a; -SELECT * FROM t2 ORDER BY a; - ---echo *** Now move C to D, after letting it fall a little behind *** -connection server_3; ---source include/stop_slave.inc - -connection server_1; -INSERT INTO t2 VALUES (6, "i6b"); -INSERT INTO t2 VALUES (7, "i7b"); ---source include/save_master_gtid.inc - -connection server_3; ---replace_result $SERVER_MYPORT_4 SERVER_MYPORT_4 -eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SERVER_MYPORT_4, - MASTER_USE_GTID=CURRENT_POS; ---source include/start_slave.inc ---source include/sync_with_master_gtid.inc -SELECT * FROM t2 ORDER BY a; - ---echo *** Now change everything back to what it was, to make rpl_end.inc happy -# Also check that MASTER_USE_GTID=CURRENT_POS is still enabled. -connection server_2; -# We need to sync up server_2 before switching. If it happened to have reached -# the point 'UPDATE t2 SET b="j1a" WHERE a=5' it will fail to connect to -# server_1, which is (deliberately) missing that transaction. ---source include/sync_with_master_gtid.inc ---source include/stop_slave.inc ---replace_result $MASTER_MYPORT MASTER_MYPORT -eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $MASTER_MYPORT; ---source include/start_slave.inc ---source include/wait_for_slave_to_start.inc - -connection server_3; ---source include/stop_slave.inc ---replace_result $SLAVE_MYPORT SLAVE_MYPORT -eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SLAVE_MYPORT; ---source include/start_slave.inc ---source include/sync_with_master_gtid.inc - -connection server_4; ---source include/stop_slave.inc ---replace_result $SERVER_MYPORT_3 SERVER_MYPORT_3 -eval CHANGE MASTER TO master_host = '127.0.0.1', master_port = $SERVER_MYPORT_3; ---source include/start_slave.inc - -connection server_1; -DROP TABLE t1,t2; ---source include/save_master_gtid.inc - ---echo *** A few more checks for BINLOG_GTID_POS function *** ---let $valid_binlog_name = query_get_value(SHOW BINARY LOGS,Log_name,1) ---error ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT -SELECT BINLOG_GTID_POS(); ---error ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT -SELECT BINLOG_GTID_POS('a'); ---error ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT -SELECT BINLOG_GTID_POS('a',1,NULL); -SELECT BINLOG_GTID_POS(1,'a'); -SELECT BINLOG_GTID_POS(NULL,NULL); -SELECT BINLOG_GTID_POS('',1); -SELECT BINLOG_GTID_POS('a',1); -eval SELECT BINLOG_GTID_POS('$valid_binlog_name',-1); -eval SELECT BINLOG_GTID_POS('$valid_binlog_name',0); -eval SELECT BINLOG_GTID_POS('$valid_binlog_name',18446744073709551615); -eval SELECT BINLOG_GTID_POS('$valid_binlog_name',18446744073709551616); - - ---echo *** Some tests of @@GLOBAL.gtid_binlog_state *** ---connection server_2 ---source include/sync_with_master_gtid.inc ---source include/stop_slave.inc - ---connection server_1 -SET @old_state= @@GLOBAL.gtid_binlog_state; - ---error ER_BINLOG_MUST_BE_EMPTY -SET GLOBAL gtid_binlog_state = ''; -RESET MASTER; -SET GLOBAL gtid_binlog_state = ''; -FLUSH LOGS; ---source include/show_binary_logs.inc -SET GLOBAL gtid_binlog_state = '0-1-10,1-2-20,0-3-30'; ---source include/show_binary_logs.inc ---let $binlog_file= master-bin.000001 ---let $binlog_start= 4 ---source include/show_binlog_events.inc -#SELECT @@GLOBAL.gtid_binlog_pos; -#SELECT @@GLOBAL.gtid_binlog_state; ---error ER_BINLOG_MUST_BE_EMPTY -SET GLOBAL gtid_binlog_state = @old_state; -RESET MASTER; -SET GLOBAL gtid_binlog_state = @old_state; - -# Check that slave can reconnect again, despite the RESET MASTER, as we -# restored the state. - -CREATE TABLE t1 (a INT PRIMARY KEY); -SET gtid_seq_no=100; -INSERT INTO t1 VALUES (1); ---source include/save_master_gtid.inc - ---connection server_2 ---source include/start_slave.inc -# We cannot just use sync_with_master as we've done RESET MASTER, so -# slave old-style position is wrong. -# So sync on gtid position instead. ---source include/sync_with_master_gtid.inc - -SELECT * FROM t1; -# Check that the IO gtid position in SHOW SLAVE STATUS is also correct. ---let $status_items= Gtid_IO_Pos ---source include/show_slave_status.inc - ---echo *** Test @@LAST_GTID and MASTER_GTID_WAIT() *** - ---connection server_1 -DROP TABLE t1; -CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=InnoDB; ---save_master_pos - ---connection server_2 ---sync_with_master ---source include/stop_slave.inc - ---connect (m1,127.0.0.1,root,,test,$SERVER_MYPORT_1,) -SELECT @@last_gtid; -SET gtid_seq_no=110; -SELECT @@last_gtid; -BEGIN; -SELECT @@last_gtid; -INSERT INTO t1 VALUES (2); -SELECT @@last_gtid; -COMMIT; -SELECT @@last_gtid; ---let $pos= `SELECT @@gtid_binlog_pos` - ---connect (s1,127.0.0.1,root,,test,$SERVER_MYPORT_2,) -eval SET @pos= '$pos'; -# Check NULL argument. -SELECT master_gtid_wait(NULL); -# Check empty argument returns immediately. -SELECT master_gtid_wait('', NULL); -# Check this gets counted -SHOW STATUS LIKE 'Master_gtid_wait_count'; -SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; -SHOW STATUS LIKE 'Master_gtid_wait_time'; -# Let's check that we get a timeout -SELECT master_gtid_wait(@pos, 0.5); -SELECT * FROM t1 ORDER BY a; -# Now actually wait until the slave reaches the position -send SELECT master_gtid_wait(@pos); - ---connection server_2 ---source include/start_slave.inc - ---connection s1 -reap; -SELECT * FROM t1 ORDER BY a; - -# Test waiting on a domain that does not exist yet. ---source include/stop_slave.inc - ---connection server_1 -SET gtid_domain_id= 1; -INSERT INTO t1 VALUES (3); ---let $pos= `SELECT @@gtid_binlog_pos` - ---connection s1 ---replace_result $pos POS -eval SET @pos= '$pos'; -SELECT master_gtid_wait(@pos, 0); -SELECT * FROM t1 WHERE a >= 3; -send SELECT master_gtid_wait(@pos, -1); - ---connection server_2 ---source include/start_slave.inc - ---connection s1 -reap; -SELECT * FROM t1 WHERE a >= 3; -# Waiting for only part of the position. -SELECT master_gtid_wait('1-1-1', 0); - -# Now test a lot of parallel master_gtid_wait() calls, completing in different -# order, and some of which time out or get killed on the way. - ---connection s1 -send SELECT master_gtid_wait('2-1-1,1-1-4,0-1-110'); - ---connect (s2,127.0.0.1,root,,test,$SERVER_MYPORT_2,) -# This will time out. No event 0-1-1000 exists -send SELECT master_gtid_wait('0-1-1000', 0.5); - ---connect (s3,127.0.0.1,root,,test,$SERVER_MYPORT_2,) -# This one we will kill ---let $kill1_id= `SELECT connection_id()` -send SELECT master_gtid_wait('0-1-2000'); - ---connect (s4,127.0.0.1,root,,test,$SERVER_MYPORT_2,) -send SELECT master_gtid_wait('2-1-10'); - ---connect (s5,127.0.0.1,root,,test,$SERVER_MYPORT_2,) -send SELECT master_gtid_wait('2-1-6', 1); - -# This one we will kill also. ---connect (s6,127.0.0.1,root,,test,$SERVER_MYPORT_2,) ---let $kill2_id= `SELECT connection_id()` -send SELECT master_gtid_wait('2-1-5'); - ---connect (s7,127.0.0.1,root,,test,$SERVER_MYPORT_2,) -send SELECT master_gtid_wait('2-1-10'); - ---connect (s8,127.0.0.1,root,,test,$SERVER_MYPORT_2,) -send SELECT master_gtid_wait('2-1-5,1-1-4,0-1-110'); - ---connect (s9,127.0.0.1,root,,test,$SERVER_MYPORT_2,) -send SELECT master_gtid_wait('2-1-2'); - ---connection server_2 -# This one completes immediately. -SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; -SHOW STATUS LIKE 'Master_gtid_wait_count'; -SELECT master_gtid_wait('1-1-1'); -SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; -SHOW STATUS LIKE 'Master_gtid_wait_count'; -let $wait_time = query_get_value(SHOW STATUS LIKE 'Master_gtid_wait_time', Value, 1); ---replace_result $wait_time MASTER_GTID_WAIT_TIME -eval SET @a= $wait_time; -SELECT IF(@a <= 100*1000*1000, "OK", CONCAT("Error: wait time ", @a, " is larger than expected")) - AS Master_gtid_wait_time_as_expected; - - ---connect (s10,127.0.0.1,root,,test,$SERVER_MYPORT_2,) -send SELECT master_gtid_wait('0-1-109'); - ---connection server_2 -# This one should time out. -SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; -SHOW STATUS LIKE 'Master_gtid_wait_count'; -SELECT master_gtid_wait('2-1-2', 0.5); -SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; -SHOW STATUS LIKE 'Master_gtid_wait_count'; -let $wait_time = query_get_value(SHOW STATUS LIKE 'Master_gtid_wait_time', Value, 1); ---replace_result $wait_time MASTER_GTID_WAIT_TIME -eval SET @a= $wait_time; -# We expect a wait time of just a bit over 0.5 seconds. But thread scheduling -# and timer inaccuracies could introduce significant jitter. So allow a -# generous interval. -SELECT IF(@a BETWEEN 0.4*1000*1000 AND 100*1000*1000, "OK", CONCAT("Error: wait time ", @a, " not as expected")) AS Master_gtid_wait_time_as_expected; - ---replace_result $kill1_id KILL_ID -eval KILL QUERY $kill1_id; ---connection s3 ---error ER_QUERY_INTERRUPTED -reap; - ---connection server_1 -SET gtid_domain_id=2; -SET gtid_seq_no=2; -INSERT INTO t1 VALUES (4); - ---connection s9 -reap; - ---connection server_2 ---replace_result $kill2_id KILL_ID -eval KILL CONNECTION $kill2_id; - ---connection s6 ---error 2013,ER_CONNECTION_KILLED -reap; - ---connection server_1 -SET gtid_domain_id=1; -SET gtid_seq_no=4; -INSERT INTO t1 VALUES (5); -SET gtid_domain_id=2; -SET gtid_seq_no=5; -INSERT INTO t1 VALUES (6); - ---connection s8 -reap; ---connection s1 -reap; ---connection s2 -reap; ---connection s5 -reap; ---connection s10 -reap; - ---connection server_1 -SET gtid_domain_id=2; -SET gtid_seq_no=10; -INSERT INTO t1 VALUES (7); - ---connection s4 -reap; ---connection s7 -reap; - - ---echo *** Test gtid_slave_pos when used with GTID *** - ---connection server_2 ---source include/stop_slave.inc - ---connection server_1 -SET gtid_domain_id=2; -SET gtid_seq_no=1000; -INSERT INTO t1 VALUES (10); -INSERT INTO t1 VALUES (11); ---save_master_pos - ---connection server_2 -SET sql_slave_skip_counter= 1; ---source include/start_slave.inc ---sync_with_master -SELECT * FROM t1 WHERE a >= 10 ORDER BY a; -SELECT IF(LOCATE("2-1-1001", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1001 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; - ---source include/stop_slave.inc - ---connection server_1 -SET gtid_domain_id=2; -SET gtid_seq_no=1010; -INSERT INTO t1 VALUES (12); -INSERT INTO t1 VALUES (13); ---save_master_pos - ---connection server_2 -SET sql_slave_skip_counter= 2; ---source include/start_slave.inc ---sync_with_master -SELECT * FROM t1 WHERE a >= 10 ORDER BY a; -SELECT IF(LOCATE("2-1-1011", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1011 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; - ---source include/stop_slave.inc - ---connection server_1 -SET gtid_domain_id=2; -SET gtid_seq_no=1020; -INSERT INTO t1 VALUES (14); -INSERT INTO t1 VALUES (15); -INSERT INTO t1 VALUES (16); ---save_master_pos - ---connection server_2 -SET sql_slave_skip_counter= 3; ---source include/start_slave.inc ---sync_with_master -SELECT * FROM t1 WHERE a >= 10 ORDER BY a; -SELECT IF(LOCATE("2-1-1022", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1022 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; - ---source include/stop_slave.inc - ---connection server_1 -SET gtid_domain_id=2; -SET gtid_seq_no=1030; -# Disable logging Annotate_rows events to preserve events count. -let $binlog_annotate_row_events_saved= `SELECT @@binlog_annotate_row_events`; -SET @@binlog_annotate_row_events= 0; -INSERT INTO t1 VALUES (17); -INSERT INTO t1 VALUES (18); -INSERT INTO t1 VALUES (19); -eval SET @@binlog_annotate_row_events= $binlog_annotate_row_events_saved; ---save_master_pos - ---connection server_2 -SET sql_slave_skip_counter= 5; ---source include/start_slave.inc ---sync_with_master -SELECT * FROM t1 WHERE a >= 10 ORDER BY a; -SELECT IF(LOCATE("2-1-1032", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1032 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; - - ---source include/stop_slave.inc - ---connection server_1 -SET gtid_domain_id=3; -SET gtid_seq_no=100; -CREATE TABLE t2 (a INT PRIMARY KEY); -DROP TABLE t2; -SET gtid_domain_id=2; -SET gtid_seq_no=1040; -INSERT INTO t1 VALUES (20); ---save_master_pos - ---connection server_2 -SET @saved_mode= @@GLOBAL.slave_ddl_exec_mode; -SET GLOBAL slave_ddl_exec_mode=STRICT; -SET sql_slave_skip_counter=1; -START SLAVE UNTIL master_gtid_pos="3-1-100"; ---let $master_pos=3-1-100 ---source include/sync_with_master_gtid.inc ---source include/wait_for_slave_to_stop.inc ---error ER_NO_SUCH_TABLE -SELECT * FROM t2; -SELECT IF(LOCATE("3-1-100", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-100 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; - -# Start the slave again, it should fail on the DROP TABLE as the table is not there. -SET sql_log_bin=0; -CALL mtr.add_suppression("Slave: Unknown table 'test\\.t2' Error_code: 1051"); -SET sql_log_bin=1; -START SLAVE; ---let $slave_sql_errno=1051 ---source include/wait_for_slave_sql_error.inc -SELECT IF(LOCATE("3-1-100", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-100 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; - -STOP SLAVE IO_THREAD; -SET sql_slave_skip_counter=2; ---source include/start_slave.inc ---sync_with_master - -SELECT * FROM t1 WHERE a >= 20 ORDER BY a; -SELECT IF(LOCATE("3-1-101", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-101 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; -SELECT IF(LOCATE("2-1-1040", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1040 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; - -SET GLOBAL slave_ddl_exec_mode= @saved_mode; - - ---echo *** Test GTID-connecting to a master with out-of-order sequence numbers in the binlog. *** - -# Create an out-of-order binlog on server 2. -# Let server 3 replicate to an out-of-order point, stop it, restart it, -# and check that it replicates correctly despite the out-of-order. - ---connection server_1 -SET gtid_domain_id= @@GLOBAL.gtid_domain_id; -INSERT INTO t1 VALUES (31); ---save_master_pos - ---connection server_2 ---sync_with_master -SET gtid_domain_id= @@GLOBAL.gtid_domain_id; -INSERT INTO t1 VALUES (32); - ---connection server_1 -INSERT INTO t1 VALUES (33); ---save_master_pos - ---connection server_2 ---sync_with_master ---save_master_pos - ---connection server_3 ---sync_with_master ---source include/stop_slave.inc - ---connection server_1 -INSERT INTO t1 VALUES (34); ---save_master_pos - ---connection server_2 ---sync_with_master ---save_master_pos - ---connection server_3 ---source include/start_slave.inc ---sync_with_master -SELECT * FROM t1 WHERE a >= 30 ORDER BY a; ---save_master_pos - ---connection server_4 ---sync_with_master -SELECT * FROM t1 WHERE a >= 30 ORDER BY a; - - -# Clean up. ---connection server_1 -DROP TABLE t1; - - ---source include/rpl_end.inc |