12 files changed, 119 insertions, 47 deletions
diff --git a/mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result b/mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result
new file mode 100644
index 00000000000..1bee6f2ec1a
--- /dev/null
+++ b/mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result
@@ -0,0 +1,19 @@
+include/master-slave.inc
+[connection master]
+call mtr.add_suppression("Error in Log_event::read_log_event()");
+include/rpl_stop_server.inc [server_number=1]
+include/rpl_start_server.inc [server_number=1]
+show binlog events;
+ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error
+call mtr.add_suppression("Slave I/O: Got fatal error 1236 from master when reading data from binary log");
+stop slave;
+reset slave;
+start slave;
+include/wait_for_slave_param.inc [Last_IO_Errno]
+Last_IO_Errno = '1236'
+Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary log: 'binlog truncated in the middle of event; consider out of disk space on master; the last event was read from 'master-bin.000001' at 316, the last byte read was read from 'master-bin.000001' at 335.''
+reset master;
+stop slave;
+reset slave;
+drop table t;
+End of the tests
diff --git a/mysql-test/suite/rpl/r/rpl_checksum.result b/mysql-test/suite/rpl/r/rpl_checksum.result
index 7b483c7a9e9..b6b1210f05f 100644
--- a/mysql-test/suite/rpl/r/rpl_checksum.result
+++ b/mysql-test/suite/rpl/r/rpl_checksum.result
@@ -71,7 +71,7 @@ insert into t1 values (1) /* will not be applied on slave due to simulation */;
 set @@global.debug='d,simulate_slave_unaware_checksum';
 start slave;
 include/wait_for_slave_io_error.inc [errno=1236]
-Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary log: 'Slave can not handle replication events with the checksum that master is configured to log''
+Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary log: 'Slave can not handle replication events with the checksum that master is configured to log; the last event was read from 'master-bin.000010' at 245, the last byte read was read from 'master-bin.000010' at 245.''
 select count(*) as zero from t1;
 zero
 0
diff --git a/mysql-test/suite/rpl/r/rpl_insert_duplicate.result b/mysql-test/suite/rpl/r/rpl_insert_duplicate.result
deleted file mode 100644
index 61ebbaaa5a9..00000000000
--- a/mysql-test/suite/rpl/r/rpl_insert_duplicate.result
+++ /dev/null
@@ -1,29 +0,0 @@
-include/master-slave.inc
-[connection master]
-CREATE TABLE t1 (
-a INT UNSIGNED NOT NULL PRIMARY KEY
-) ENGINE=innodb;
-CREATE TABLE t2 (
-a INT UNSIGNED
-) ENGINE=innodb;
-INSERT INTO t1 VALUES (1);
-INSERT INTO t2 VALUES (1);
-INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a;
-include/assert.inc [Sum of elements in t1 should be 1.]
-include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
-include/diff_tables.inc [master:test.t1 , slave:test.t1]
-drop table t1, t2;
-CREATE TABLE t1 (
-a INT UNSIGNED NOT NULL PRIMARY KEY
-) ENGINE=myisam;
-CREATE TABLE t2 (
-a INT UNSIGNED
-) ENGINE=myisam;
-INSERT INTO t1 VALUES (1);
-INSERT INTO t2 VALUES (1);
-INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a;
-include/assert.inc [Sum of elements in t1 should be 1.]
-include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
-include/diff_tables.inc [master:test.t1 , slave:test.t1]
-drop table t1, t2;
-include/rpl_end.inc
diff --git a/mysql-test/suite/rpl/r/rpl_insert_ignore.result b/mysql-test/suite/rpl/r/rpl_insert_ignore.result
index 04b64359126..1598b3c059f 100644
--- a/mysql-test/suite/rpl/r/rpl_insert_ignore.result
+++ b/mysql-test/suite/rpl/r/rpl_insert_ignore.result
@@ -26,6 +26,19 @@ include/diff_tables.inc [master:test.t1 , slave:test.t1]
 INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
 include/assert.inc [Count of elements in t1 should be 6.]
 include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
+DROP TABLE t1;
+DROP TABLE t2;
+CREATE TABLE t1 (
+a INT UNSIGNED NOT NULL PRIMARY KEY
+) ENGINE=innodb;
+CREATE TABLE t2 (
+a INT UNSIGNED
+) ENGINE=innodb;
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a;
+include/assert.inc [Sum of elements in t1 should be 1.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
 drop table t1, t2;
 CREATE TABLE t1 (
 a int unsigned not null auto_increment primary key,
@@ -52,5 +65,18 @@ include/diff_tables.inc [master:test.t1 , slave:test.t1]
 INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
 include/assert.inc [Count of elements in t1 should be 6.]
 include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
+DROP TABLE t1;
+DROP TABLE t2;
+CREATE TABLE t1 (
+a INT UNSIGNED NOT NULL PRIMARY KEY
+) ENGINE=myisam;
+CREATE TABLE t2 (
+a INT UNSIGNED
+) ENGINE=myisam;
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a;
+include/assert.inc [Sum of elements in t1 should be 1.]
+include/assert.inc [In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.]
 drop table t1, t2;
 include/rpl_end.inc
diff --git a/mysql-test/suite/rpl/r/rpl_insert_select.result b/mysql-test/suite/rpl/r/rpl_insert_select.result
deleted file mode 100644
index d98ae2538fa..00000000000
--- a/mysql-test/suite/rpl/r/rpl_insert_select.result
+++ /dev/null
@@ -1,14 +0,0 @@
-include/master-slave.inc
-[connection master]
-create table t1 (n int not null primary key);
-insert into t1 values (1);
-create table t2 (n int);
-insert into t2 values (1);
-insert ignore into t1 select * from t2;
-insert into t1 values (2);
-select * from t1;
-n
-1
-2
-drop table t1,t2;
-include/rpl_end.inc
diff --git a/mysql-test/suite/rpl/r/rpl_known_bugs_detection.result b/mysql-test/suite/rpl/r/rpl_known_bugs_detection.result
index 43f5c082dea..7857ba95209 100644
--- a/mysql-test/suite/rpl/r/rpl_known_bugs_detection.result
+++ b/mysql-test/suite/rpl/r/rpl_known_bugs_detection.result
@@ -1,3 +1,4 @@
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format");
 include/master-slave.inc
 [connection master]
 CREATE TABLE t1 (a INT NOT NULL PRIMARY KEY AUTO_INCREMENT, b INT,
@@ -42,12 +43,16 @@ SELECT t2.field_a, t2.field_b, t2.field_c
 FROM t2
 ON DUPLICATE KEY UPDATE
 t1.field_3 = t2.field_c;
+Warnings:
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. INSERT... SELECT... ON DUPLICATE KEY UPDATE is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are updated. This order cannot be predicted and may differ on master and the slave.
 INSERT INTO t2 (field_a, field_b, field_c) VALUES (6, 'f', '6f');
 INSERT INTO t1 (field_1, field_2, field_3)
 SELECT t2.field_a, t2.field_b, t2.field_c
 FROM t2
 ON DUPLICATE KEY UPDATE
 t1.field_3 = t2.field_c;
+Warnings:
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. INSERT... SELECT... ON DUPLICATE KEY UPDATE is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are updated. This order cannot be predicted and may differ on master and the slave.
 SELECT * FROM t1;
 id	field_1	field_2	field_3
 1	1	a	1a
diff --git a/mysql-test/suite/rpl/r/rpl_log_pos.result b/mysql-test/suite/rpl/r/rpl_log_pos.result
index 58d0e202110..29b11f4b950 100644
--- a/mysql-test/suite/rpl/r/rpl_log_pos.result
+++ b/mysql-test/suite/rpl/r/rpl_log_pos.result
@@ -11,7 +11,7 @@ include/stop_slave.inc
 change master to master_log_pos=MASTER_LOG_POS;
 start slave;
 include/wait_for_slave_io_error.inc [errno=1236]
-Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary log: 'log event entry exceeded max_allowed_packet; Increase max_allowed_packet on master''
+Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary log: 'log event entry exceeded max_allowed_packet; Increase max_allowed_packet on master; the last event was read from 'master-bin.000001' at 247, the last byte read was read from 'master-bin.000001' at 266.''
 include/stop_slave_sql.inc
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
diff --git a/mysql-test/suite/rpl/r/rpl_manual_change_index_file.result b/mysql-test/suite/rpl/r/rpl_manual_change_index_file.result
index 23238d9c97b..a1874ed1595 100644
--- a/mysql-test/suite/rpl/r/rpl_manual_change_index_file.result
+++ b/mysql-test/suite/rpl/r/rpl_manual_change_index_file.result
@@ -5,7 +5,7 @@ CREATE TABLE t1(c1 INT);
 FLUSH LOGS;
 call mtr.add_suppression('Got fatal error 1236 from master when reading data from binary log: .*could not find next log');
 include/wait_for_slave_io_error.inc [errno=1236]
-Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary log: 'could not find next log''
+Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary log: 'could not find next log; the last event was read from 'master-bin.000002' at 375, the last byte read was read from 'master-bin.000002' at 375.''
 CREATE TABLE t2(c1 INT);
 FLUSH LOGS;
 CREATE TABLE t3(c1 INT);
diff --git a/mysql-test/suite/rpl/r/rpl_packet.result b/mysql-test/suite/rpl/r/rpl_packet.result
index 6190f458367..be2f551f9c2 100644
--- a/mysql-test/suite/rpl/r/rpl_packet.result
+++ b/mysql-test/suite/rpl/r/rpl_packet.result
@@ -37,7 +37,7 @@ DROP TABLE t1;
 CREATE TABLE t1 (f1 int PRIMARY KEY, f2 LONGTEXT, f3 LONGTEXT) ENGINE=MyISAM;
 INSERT INTO t1(f1, f2, f3) VALUES(1, REPEAT('a', @@global.max_allowed_packet), REPEAT('b', @@global.max_allowed_packet));
 include/wait_for_slave_io_error.inc [errno=1236]
-Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary log: 'log event entry exceeded max_allowed_packet; Increase max_allowed_packet on master''
+Last_IO_Error = 'Got fatal error 1236 from master when reading data from binary log: 'log event entry exceeded max_allowed_packet; Increase max_allowed_packet on master; the last event was read from 'master-bin.000001' at 601, the last byte read was read from 'master-bin.000001' at 620.''
 STOP SLAVE;
 RESET SLAVE;
 RESET MASTER;
diff --git a/mysql-test/suite/rpl/r/rpl_row_corruption.result b/mysql-test/suite/rpl/r/rpl_row_corruption.result
new file mode 100644
index 00000000000..7fd47a20f03
--- /dev/null
+++ b/mysql-test/suite/rpl/r/rpl_row_corruption.result
@@ -0,0 +1,49 @@
+include/master-slave.inc
+[connection master]
+CREATE TABLE t1_11753004 (c1 INT);
+CREATE TABLE t2_11753004 (c1 INT);
+INSERT INTO t1_11753004 VALUES (1);
+INSERT INTO t2_11753004 VALUES (2);
+call mtr.add_suppression(".*Found table map event mapping table id 0 which was already mapped but with different settings.*");
+include/stop_slave.inc
+SET @save_debug= @@global.debug;
+SET GLOBAL debug="+d,inject_tblmap_same_id_maps_diff_table";
+include/start_slave.inc
+UPDATE t1_11753004, t2_11753004 SET t1_11753004.c1=3, t2_11753004.c1=4 WHERE t1_11753004.c1=1 OR t2_11753004.c1=2;
+include/wait_for_slave_sql_error.inc [errno=1593 ]
+include/stop_slave.inc
+SET GLOBAL debug="-d,inject_tblmap_same_id_maps_diff_table";
+include/start_slave.inc
+include/rpl_reset.inc
+DROP TABLE t1_11753004, t2_11753004;
+include/stop_slave.inc
+SET GLOBAL debug="+d,inject_tblmap_same_id_maps_diff_table";
+include/start_slave.inc
+include/rpl_reset.inc
+CREATE TABLE t1_11753004 (c1 INT);
+CREATE TABLE t2_11753004_ign (c1 INT);
+INSERT INTO t1_11753004 VALUES (1);
+INSERT INTO t2_11753004_ign VALUES (2);
+UPDATE t1_11753004, t2_11753004_ign SET t1_11753004.c1=3, t2_11753004_ign.c1=4 WHERE t1_11753004.c1=1 OR t2_11753004_ign.c1=2;
+CREATE TABLE t1 (c1 INT);
+CREATE TABLE t2 (c1 INT);
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+BINLOG '
+SOgWTg8BAAAAbgAAAHIAAAAAAAQANS42LjMtbTUtZGVidWctbG9nAAAAAAAAAAAAAAAAAAAAAAAA
+AAAAAAAAAAAAAAAAAABI6BZOEzgNAAgAEgAEBAQEEgAAVgAEGggAAAAICAgCAAAAAAVAYI8=
+'/*!*/;
+SET GLOBAL debug="+d,inject_tblmap_same_id_maps_diff_table";
+BINLOG '
+SOgWThMBAAAAKQAAAAYDAAAAAEIAAAAAAAEABHRlc3QAAnQxAAEDAAE=
+SOgWThMBAAAAKQAAAC8DAAAAAEMAAAAAAAEABHRlc3QAAnQyAAEDAAE=
+SOgWThgBAAAAKAAAAFcDAAAAAEIAAAAAAAAAAf///gEAAAD+AwAAAA==
+SOgWThgBAAAAKAAAAH8DAAAAAEMAAAAAAAEAAf///gEAAAD+BAAAAA==
+'/*!*/;
+ERROR HY000: Fatal error: Found table map event mapping table id 0 which was already mapped but with different settings.
+DROP TABLE t1,t2;
+SET GLOBAL debug="-d,inject_tblmap_same_id_maps_diff_table";
+DROP TABLE t1_11753004;
+DROP TABLE t2_11753004_ign;
+SET GLOBAL debug= @save_debug;
+include/rpl_end.inc
diff --git a/mysql-test/suite/rpl/r/rpl_row_reset_slave.result b/mysql-test/suite/rpl/r/rpl_row_reset_slave.result
index 7dc94bab481..41fe0b1a9f3 100644
--- a/mysql-test/suite/rpl/r/rpl_row_reset_slave.result
+++ b/mysql-test/suite/rpl/r/rpl_row_reset_slave.result
@@ -41,4 +41,12 @@ include/stop_slave_sql.inc
 reset slave;
 include/check_slave_no_error.inc
 change master to master_user='root';
+reset slave;
+include/start_slave.inc
+include/stop_slave.inc
+reset slave all;
+start slave;
+ERROR HY000: The server is not configured as slave; fix in config file or with CHANGE MASTER TO
+CHANGE MASTER TO MASTER_HOST= 'MASTER_HOST', MASTER_USER= 'MASTER_USER', MASTER_PORT= MASTER_PORT;
+include/start_slave.inc
 include/rpl_end.inc
diff --git a/mysql-test/suite/rpl/r/rpl_stm_reset_slave.result b/mysql-test/suite/rpl/r/rpl_stm_reset_slave.result
index aa8bc63a432..b1473c937a1 100644
--- a/mysql-test/suite/rpl/r/rpl_stm_reset_slave.result
+++ b/mysql-test/suite/rpl/r/rpl_stm_reset_slave.result
@@ -41,4 +41,12 @@ include/stop_slave_sql.inc
 reset slave;
 include/check_slave_no_error.inc
 change master to master_user='root';
+reset slave;
+include/start_slave.inc
+include/stop_slave.inc
+reset slave all;
+start slave;
+ERROR HY000: The server is not configured as slave; fix in config file or with CHANGE MASTER TO
+CHANGE MASTER TO MASTER_HOST= 'MASTER_HOST', MASTER_USER= 'MASTER_USER', MASTER_PORT= MASTER_PORT;
+include/start_slave.inc
 include/rpl_end.inc