1 files changed, 0 insertions, 222 deletions
diff --git a/mysql-test/t/ndb_trigger.test b/mysql-test/t/ndb_trigger.test
deleted file mode 100644
index 00927f93d10..00000000000
--- a/mysql-test/t/ndb_trigger.test
+++ /dev/null
@@ -1,222 +0,0 @@
-# Tests which involve triggers and NDB storage engine
---source include/have_ndb.inc
---source include/have_binlog_format_row.inc
---source include/not_embedded.inc
-
-# 
-# Test for bug#18437 "Wrong values inserted with a before update
-# trigger on NDB table". SQL-layer didn't properly inform handler
-# about fields which were read and set in triggers. In some cases 
-# this resulted in incorrect (garbage) values of OLD variables and
-# lost changes to NEW variables.
-# You can find similar tests for ON INSERT triggers in federated.test
-# since this engine so far is the only engine in MySQL which cares
-# about field mark-up during handler::write_row() operation.
-#
-
---disable_warnings
-drop table if exists t1, t2, t3, t4, t5;
---enable_warnings
-
-create table t1 (id int primary key, a int not null, b decimal (63,30) default 0) engine=ndb;
-create table t2 (op char(1), a int not null, b decimal (63,30));
-create table t3 select 1 as i;
-create table t4 (a int not null primary key, b int) engine=ndb;
-create table t5 (a int not null primary key, b int) engine=ndb;
-
-delimiter //;
-create trigger t1_bu before update on t1 for each row
-begin
-  insert into t2 values ("u", old.a, old.b);
-  set new.b = old.b + 10;
-end;//
-create trigger t1_bd before delete on t1 for each row
-begin
-  insert into t2 values ("d", old.a, old.b);
-end;//
-create trigger t4_au after update on t4
-  for each row begin
-   update t5 set b = b+1;
-  end;
-//
-create trigger t4_ad after delete on t4
-  for each row begin
-    update t5 set b = b+1;
-  end;
-//
-delimiter ;//
-
-insert into t1 values (1, 1, 1.05), (2, 2, 2.05), (3, 3, 3.05), (4, 4, 4.05);
-insert into t4 values (1,1), (2,2), (3,3), (4, 4);
-insert into t5 values (1,0);
-
-# Check that usual update works as it should
-update t1 set a=5 where a != 3;
-select * from t1 order by id;
-select * from t2 order by op, a, b;
-delete from t2;
-# Check that everything works for multi-update
-update t1, t3 set a=6 where a = 5;
-select * from t1 order by id;
-select * from t2 order by op, a, b;
-delete from t2;
-# Check for delete
-delete from t1 where a != 3;
-select * from t1 order by id;
-select * from t2 order by op, a, b;
-delete from t2;
-# Check for multi-delete
-insert into t1 values (1, 1, 1.05), (2, 2, 2.05), (4, 4, 4.05);
-delete t1 from t1, t3 where a != 3;
-select * from t1 order by id;
-select * from t2 order by op, a, b;
-delete from t2;
-# Check for insert ... on duplicate key update
-insert into t1 values (4, 4, 4.05);
-insert into t1 (id, a) values (4, 1), (3, 1) on duplicate key update a= a + 1;
-select * from t1 order by id;
-select * from t2 order by op, a, b;
-delete from t2;
-# Check for insert ... select ... on duplicate key update
-delete from t3;
-insert into t3 values (4), (3);
-insert into t1 (id, a) (select i, 1 from t3) on duplicate key update a= a + 1;
-select * from t1 order by id;
-select * from t2 order by op, a, b;
-delete from t2;
-# Check for replace
-replace into t1 (id, a) values (4, 1), (3, 1);
-select * from t1 order by id;
-select * from t2 order by op, a, b;
-delete from t1;
-delete from t2;
-# Check for replace ... select ...
-insert into t1 values (3, 1, 1.05), (4, 1, 2.05);
-replace into t1 (id, a) (select i, 2 from t3);
-select * from t1 order by id;
-select * from t2 order by op, a, b;
-delete from t1;
-delete from t2;
-# Check for load data replace
-insert into t1 values (3, 1, 1.05), (5, 2, 2.05);
-load data infile '../std_data_ln/loaddata5.dat' replace into table t1 fields terminated by '' enclosed by '' ignore 1 lines (id, a);
-select * from t1 order by id;
-select * from t2 order by op, a, b;
-update t4 set b = 10 where a = 1;
-select * from t5 order by a;
-update t5 set b = 0;
-delete from t4 where a = 1;
-select * from t5 order by a;
-drop trigger t4_au;
-drop trigger t4_ad;
-
-drop table t1, t2, t3, t4, t5;
-# Test for bug#26242
-# Verify that AFTER UPDATE/DELETE triggers are executed
-# after the change has actually taken place
-
-CREATE TABLE t1 (
-  id INT NOT NULL PRIMARY KEY,
-  xy INT
-) ENGINE=ndbcluster;
-
-INSERT INTO t1 VALUES (1, 0);
-
-DELIMITER //;
-CREATE TRIGGER t1_update AFTER UPDATE ON t1 FOR EACH ROW BEGIN REPLACE INTO t2 SELECT * FROM t1 WHERE t1.id = NEW.id; END //
-DELIMITER ;//
-
-CREATE TABLE t2 (
-  id INT NOT NULL PRIMARY KEY,
-  xy INT
-) ENGINE=ndbcluster;
-
-INSERT INTO t2 VALUES (2, 0);
-
-CREATE TABLE t3 (id INT NOT NULL PRIMARY KEY) ENGINE=ndbcluster;
-
-INSERT INTO t3 VALUES (1);
-
-CREATE TABLE t4 LIKE t1;
-
-DELIMITER //;
-CREATE TRIGGER t4_update AFTER UPDATE ON t4 FOR EACH ROW BEGIN REPLACE INTO t5 SELECT * FROM t4 WHERE t4.id = NEW.id; END //
-DELIMITER ;//
-
-CREATE TABLE t5 LIKE t2;
-
-UPDATE t1 SET xy = 3 WHERE id = 1;
-SELECT xy FROM t1 where id = 1;
-SELECT xy FROM t2 where id = 1;
-
-UPDATE t1 SET xy  = 4 WHERE id IN (SELECT id FROM t3 WHERE id = 1);
-SELECT xy FROM t1 where id = 1;
-SELECT xy FROM t2 where id = 1;
-
-INSERT INTO t4 SELECT * FROM t1;
-INSERT INTO t5 SELECT * FROM t2;
-UPDATE t1,t4 SET t1.xy = 3, t4.xy = 3 WHERE t1.id = 1 AND t4.id = 1;
-SELECT xy FROM t1 where id = 1;
-SELECT xy FROM t2 where id = 1;
-SELECT xy FROM t4 where id = 1;
-SELECT xy FROM t5 where id = 1;
-
-UPDATE t1,t4 SET t1.xy = 4, t4.xy = 4 WHERE t1.id IN (SELECT id FROM t3 WHERE id = 1) AND t4.id IN (SELECT id FROM t3 WHERE id = 1);
-SELECT xy FROM t1 where id = 1;
-SELECT xy FROM t2 where id = 1;
-SELECT xy FROM t4 where id = 1;
-SELECT xy FROM t5 where id = 1;
-
-INSERT INTO t1 VALUES (1,0) ON DUPLICATE KEY UPDATE xy = 5;
-SELECT xy FROM t1 where id = 1;
-SELECT xy FROM t2 where id = 1;
-
-DROP TRIGGER t1_update;
-DROP TRIGGER t4_update;
-
-DELIMITER //;
-CREATE TRIGGER t1_delete AFTER DELETE ON t1 FOR EACH ROW BEGIN REPLACE INTO t2 SELECT * FROM t1 WHERE t1.id > 4; END //
-DELIMITER ;//
-
-DELIMITER //;
-CREATE TRIGGER t4_delete AFTER DELETE ON t4 FOR EACH ROW BEGIN REPLACE INTO t5 SELECT * FROM t4 WHERE t4.id > 4; END //
-DELIMITER ;//
-
-INSERT INTO t1 VALUES (5, 0),(6,0);
-INSERT INTO t2 VALUES (5, 1),(6,1);
-INSERT INTO t3 VALUES (5);
-SELECT * FROM t1 order by id;
-SELECT * FROM t2 order by id;
-DELETE FROM t1 WHERE id IN (SELECT id FROM t3 WHERE id = 5);
-SELECT * FROM t1 order by id;
-SELECT * FROM t2 order by id;
-
-INSERT INTO t1 VALUES (5,0);
-UPDATE t2 SET xy = 1 WHERE id = 6;
-TRUNCATE t4;
-INSERT INTO t4 SELECT * FROM t1;
-TRUNCATE t5;
-INSERT INTO t5 SELECT * FROM t2;
-SELECT * FROM t1 order by id;
-SELECT * FROM t2 order by id;
-SELECT * FROM t4 order by id;
-SELECT * FROM t5 order by id;
-DELETE FROM t1,t4 USING t1,t3,t4 WHERE t1.id IN (SELECT id FROM t3 WHERE id = 5) AND t4.id IN (SELECT id FROM t3 WHERE id = 5);
-SELECT * FROM t1 order by id;
-SELECT * FROM t2 order by id;
-SELECT * FROM t4 order by id;
-SELECT * FROM t5 order by id;
-
-INSERT INTO t1 VALUES (5, 0);
-REPLACE INTO t2 VALUES (6,1);
-SELECT * FROM t1 order by id;
-SELECT * FROM t2 order by id;
-REPLACE INTO t1 VALUES (5, 1);
-SELECT * FROM t1 order by id;
-SELECT * FROM t2 order by id;
-
-DROP TRIGGER t1_delete;
-DROP TRIGGER t4_delete;
-DROP TABLE t1, t2, t3, t4, t5;
-
---echo End of 5.1 tests