diff options
Diffstat (limited to 'packaging/rpm-uln/mysql.spec.sh')
-rw-r--r-- | packaging/rpm-uln/mysql.spec.sh | 1991 |
1 files changed, 0 insertions, 1991 deletions
diff --git a/packaging/rpm-uln/mysql.spec.sh b/packaging/rpm-uln/mysql.spec.sh deleted file mode 100644 index 34aed51048f..00000000000 --- a/packaging/rpm-uln/mysql.spec.sh +++ /dev/null @@ -1,1991 +0,0 @@ -# -# This file was modified by Oracle in 2011 and later. -# Details of the modifications are described in the "changelog" section. -# -# Modifications copyright (c) 2011, 2012, Oracle and/or its -# affiliates. All rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; see the file COPYING. If not, write to the -# Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston -# MA 02110-1301 USA. - -############################################################################## -# Some common macro definitions -############################################################################## - -# NOTE: "vendor" is used in upgrade/downgrade check, so you can't -# change these, has to be exactly as is. -# %define mysql_old_vendor MySQL AB # Applies to traditional MySQL RPMs only. -# %define mysql_vendor_2 Sun Microsystems, Inc. -%define mysql_vendor Oracle and/or its affiliates - -%define mysql_version @VERSION@ - -%define mysqldatadir /var/lib/mysql - -%define release 1 - -############################################################################## -# Command line handling -############################################################################## -# -# To set options: -# -# $ rpmbuild --define="option <x>" ... -# - -# ---------------------------------------------------------------------------- -# Commercial builds -# ---------------------------------------------------------------------------- -%if %{undefined commercial} -%define commercial 0 -%endif - -# ---------------------------------------------------------------------------- -# Source name -# ---------------------------------------------------------------------------- -%if %{undefined src_base} -%define src_base mysql -%endif -%define src_dir %{src_base}-%{mysql_version} - -# ---------------------------------------------------------------------------- -# Feature set (storage engines, options). Default to community (everything) -# ---------------------------------------------------------------------------- -%if %{undefined feature_set} -%define feature_set community -%endif - -# ---------------------------------------------------------------------------- -# Server comment strings -# ---------------------------------------------------------------------------- -%if %{undefined compilation_comment_debug} -%define compilation_comment_debug MySQL Community Server - Debug (GPL) -%endif -%if %{undefined compilation_comment_release} -%define compilation_comment_release MySQL Community Server (GPL) -%endif - -# ---------------------------------------------------------------------------- -# Product and server suffixes -# ---------------------------------------------------------------------------- -%if %{undefined product_suffix} - %if %{defined short_product_tag} - %define product_suffix -%{short_product_tag} - %else - %define product_suffix %{nil} - %endif -%endif - -%if %{undefined server_suffix} -%define server_suffix %{nil} -%endif - -# ---------------------------------------------------------------------------- -# Distribution support -# ---------------------------------------------------------------------------- -%if %{undefined distro_specific} -%define distro_specific 0 -%endif -%if %{distro_specific} - %if %(test -f /etc/oracle-release && echo 1 || echo 0) - %define elver %(rpm -qf --qf '%%{version}\\n' /etc/oracle-release | sed -e 's/^\\([0-9]*\\).*/\\1/g') - %if "%elver" == "6" - %define distro_description Oracle Linux 6 - %define distro_releasetag el6 - %define distro_buildreq gcc-c++ ncurses-devel perl readline-devel time zlib-devel - %define distro_requires chkconfig coreutils grep procps shadow-utils net-tools - %else - %{error:Oracle Linux %{elver} is unsupported} - %endif - %else - %if %(test -f /etc/redhat-release && echo 1 || echo 0) - %define rhelver %(rpm -qf --qf '%%{version}\\n' /etc/redhat-release | sed -e 's/^\\([0-9]*\\).*/\\1/g') - %if "%rhelver" == "5" - %define distro_description Red Hat Enterprise Linux 5 - %define distro_releasetag rhel5 - %define distro_buildreq gcc-c++ gperf ncurses-devel perl readline-devel time zlib-devel - %define distro_requires chkconfig coreutils grep procps shadow-utils net-tools - %else - %if "%rhelver" == "6" - %define distro_description Red Hat Enterprise Linux 6 - %define distro_releasetag rhel6 - %define distro_buildreq gcc-c++ ncurses-devel perl readline-devel time zlib-devel - %define distro_requires chkconfig coreutils grep procps shadow-utils net-tools - %else - %{error:Red Hat Enterprise Linux %{rhelver} is unsupported} - %endif - %endif - %else - %if %(test -f /etc/SuSE-release && echo 1 || echo 0) - %define susever %(rpm -qf --qf '%%{version}\\n' /etc/SuSE-release | cut -d. -f1) - %if "%susever" == "10" - %define distro_description SUSE Linux Enterprise Server 10 - %define distro_releasetag sles10 - %define distro_buildreq gcc-c++ gdbm-devel gperf ncurses-devel openldap2-client readline-devel zlib-devel - %define distro_requires aaa_base coreutils grep procps pwdutils - %else - %if "%susever" == "11" - %define distro_description SUSE Linux Enterprise Server 11 - %define distro_releasetag sles11 - %define distro_buildreq gcc-c++ gdbm-devel gperf ncurses-devel openldap2-client procps pwdutils readline-devel zlib-devel - %define distro_requires aaa_base coreutils grep procps pwdutils - %else - %{error:SuSE %{susever} is unsupported} - %endif - %endif - %else - %{error:Unsupported distribution} - %endif - %endif - %endif -%else - %define generic_kernel %(uname -r | cut -d. -f1-2) - %define distro_description Generic Linux (kernel %{generic_kernel}) - %define distro_releasetag linux%{generic_kernel} - %define distro_buildreq gcc-c++ gperf ncurses-devel perl readline-devel time zlib-devel - %define distro_requires coreutils grep procps /sbin/chkconfig /usr/sbin/useradd /usr/sbin/groupadd -%endif - -# Avoid debuginfo RPMs, leaves binaries unstripped -%define debug_package %{nil} - -# Hack to work around bug in RHEL5 __os_install_post macro, wrong inverted -# test for __debug_package -%define __strip /bin/true - -# ---------------------------------------------------------------------------- -# Support optional "tcmalloc" library (experimental) -# ---------------------------------------------------------------------------- -%if %{defined malloc_lib_target} -%define WITH_TCMALLOC 1 -%else -%define WITH_TCMALLOC 0 -%endif - -############################################################################## -# Configuration based upon above user input, not to be set directly -############################################################################## - -%if %{commercial} -%define license_files_server %{src_dir}/LICENSE.mysql -%define license_type Commercial -%else -%define license_files_server %{src_dir}/COPYING %{src_dir}/README -%define license_type GPL -%endif - -############################################################################## -# Main spec file section -############################################################################## - -Name: mysql%{product_suffix} -Summary: MySQL client programs and shared libraries -Group: Applications/Databases -Version: @MYSQL_RPM_VERSION@ -Release: %{release}%{?distro_releasetag:.%{distro_releasetag}} -# exceptions allow client libraries to be linked with most open source SW, -# not only GPL code. -License: Copyright (c) 2000, @MYSQL_COPYRIGHT_YEAR@, %{mysql_vendor}. All rights reserved. Under %{license_type} license as shown in the Description field. -URL: http://www.mysql.com/ -Packager: MySQL Release Engineering <mysql-build@oss.oracle.com> -Vendor: %{mysql_vendor} - -# Regression tests may take a long time, override the default to skip them -%{!?runselftest:%global runselftest 1} - -# Upstream has a mirror redirector for downloads, so the URL is hard to -# represent statically. You can get the tarball by following a link from -# http://dev.mysql.com/downloads/mysql/ -Source0: %{src_dir}.tar.gz -# The upstream tarball includes non-free documentation that only the -# copyright holder (MySQL -> Sun -> Oracle) may ship. -# To remove the non-free documentation, run this script after downloading -# the tarball into the current directory: -# ./generate-tarball.sh $VERSION -# Then, source name changes: -# Source0: mysql-%{version}-nodocs.tar.gz -%if %{commercial} -NoSource: 0 -%endif -Source1: generate-tarball.sh -Source2: mysql.init -Source3: my.cnf -Source4: scriptstub.c -Source5: my_config.h -# The below is only needed for packages built outside MySQL -> Sun -> Oracle: -Source6: README.mysql-docs -Source9: mysql-embedded-check.c -# Working around perl dependency checking bug in rpm FTTB. Remove later. -Source999: filter-requires-mysql.sh - -# Patch1: mysql-ssl-multilib.patch Not needed by MySQL (yaSSL), will not work in 5.5 (cmake) -Patch2: mysql-5.5-errno.patch -Patch4: mysql-5.5-testing.patch -Patch5: mysql-install-test.patch -Patch6: mysql-5.5-stack-guard.patch -# Patch7: mysql-disable-test.patch Already fixed in current 5.1 -# Patch8: mysql-setschedparam.patch Will not work in 5.5 (cmake) -# Patch9: mysql-no-docs.patch Will not work in 5.5 (cmake) -Patch10: mysql-strmov.patch - # Not used by MySQL -# Patch12: mysql-cve-2008-7247.patch Already fixed in 5.5 -Patch13: mysql-expired-certs.patch - # Will not be used by MySQL -# Patch14: mysql-missing-string-code.patch Undecided, will not work in 5.5 (cmake) -# Patch15: mysql-lowercase-bug.patch Fixed in MySQL 5.1.54 and 5.5.9 -Patch16: mysql-chain-certs.patch -Patch17: mysql-5.5-libdir.patch -Patch18: mysql-5.5-fix-tests.patch -Patch19: mysql-5.5-mtr1.patch - -BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root -BuildRequires: %{distro_buildreq} -BuildRequires: gawk -# make test requires time and ps -BuildRequires: procps -# Socket and Time::HiRes are needed to run regression tests -BuildRequires: perl(Socket), perl(Time::HiRes) - -Requires: %{distro_requires} -Requires: fileutils -Requires: mysql-libs%{product_suffix} = %{version}-%{release} -Requires: bash - -# If %%{product_suffix} is non-empty, the auto-generated capability is insufficient: -# We want all dependency handling to use the generic name only. -# Similar in other sub-packages -Provides: mysql - -# MySQL (with caps) is upstream's spelling of their own RPMs for mysql -Obsoletes: MySQL -# mysql-cluster used to be built from this SRPM, but no more -Obsoletes: mysql-cluster < 5.1.44 -# We need cross-product "Obsoletes:" to allow cross-product upgrades: -Obsoletes: mysql < %{version}-%{release} -Obsoletes: mysql-advanced < %{version}-%{release} - -# Working around perl dependency checking bug in rpm FTTB. Remove later. -%global __perl_requires %{SOURCE999} - -%description -n mysql%{product_suffix} -MySQL is a multi-user, multi-threaded SQL database server. MySQL is a -client/server implementation consisting of a server daemon (mysqld) -and many different client programs and libraries. The base package -contains the standard MySQL client programs and generic MySQL files. - -The MySQL software has Dual Licensing, which means you can use the MySQL -software free of charge under the GNU General Public License -(http://www.gnu.org/licenses/). You can also purchase commercial MySQL -licenses from %{mysql_vendor} if you do not wish to be bound by the terms of -the GPL. See the chapter "Licensing and Support" in the manual for -further info. - -%package -n mysql-libs%{product_suffix} - -Summary: The shared libraries required for MySQL clients -Group: Applications/Databases -Requires: /sbin/ldconfig -Obsoletes: mysql-libs < %{version}-%{release} -Obsoletes: mysql-libs-advanced < %{version}-%{release} -Provides: mysql-libs - -%description -n mysql-libs%{product_suffix} -The mysql-libs package provides the essential shared libraries for any -MySQL client program or interface. You will need to install this package -to use any other MySQL package or any clients that need to connect to a -MySQL server. - -%package -n mysql-server%{product_suffix} - -Summary: The MySQL server and related files -Group: Applications/Databases -Requires: mysql%{product_suffix} = %{version}-%{release} -Requires: sh-utils -Requires(pre): /usr/sbin/useradd -Requires(post): chkconfig -Requires(preun): chkconfig -# This is for /sbin/service -Requires(preun): initscripts -Requires(postun): initscripts -# mysqlhotcopy needs DBI/DBD support -Requires: perl-DBI, perl-DBD-MySQL -Obsoletes: MySQL-server -Obsoletes: mysql-server < %{version}-%{release} -Obsoletes: mysql-server-advanced < %{version}-%{release} -Provides: mysql-server - -%description -n mysql-server%{product_suffix} -MySQL is a multi-user, multi-threaded SQL database server. MySQL is a -client/server implementation consisting of a server daemon (mysqld) -and many different client programs and libraries. This package contains -the MySQL server and some accompanying files and directories. - -%package -n mysql-devel%{product_suffix} - -Summary: Files for development of MySQL applications -Group: Applications/Databases -Requires: mysql%{product_suffix} = %{version}-%{release} -Requires: openssl-devel -Obsoletes: MySQL-devel -Obsoletes: mysql-devel < %{version}-%{release} -Obsoletes: mysql-devel-advanced < %{version}-%{release} -Provides: mysql-devel - -%description -n mysql-devel%{product_suffix} -MySQL is a multi-user, multi-threaded SQL database server. This -package contains the libraries and header files that are needed for -developing MySQL client applications. - -%package -n mysql-embedded%{product_suffix} - -Summary: MySQL as an embeddable library -Group: Applications/Databases -Obsoletes: mysql-embedded < %{version}-%{release} -Obsoletes: mysql-embedded-advanced < %{version}-%{release} -Provides: mysql-embedded - -%description -n mysql-embedded%{product_suffix} -MySQL is a multi-user, multi-threaded SQL database server. This -package contains a version of the MySQL server that can be embedded -into a client application instead of running as a separate process, -as well as a command line client with such an embedded server. - -%package -n mysql-embedded-devel%{product_suffix} - -Summary: Development files for MySQL as an embeddable library -Group: Applications/Databases -Requires: mysql-embedded%{product_suffix} = %{version}-%{release} -Requires: mysql-devel%{product_suffix} = %{version}-%{release} -Obsoletes: mysql-embedded-devel < %{version}-%{release} -Obsoletes: mysql-embedded-devel-advanced < %{version}-%{release} -Provides: mysql-embedded-devel - -%description -n mysql-embedded-devel%{product_suffix} -MySQL is a multi-user, multi-threaded SQL database server. This -package contains files needed for developing and testing with -the embedded version of the MySQL server. - -%package -n mysql-test%{product_suffix} - -Summary: The test suite distributed with MySQL -Group: Applications/Databases -Requires: mysql%{product_suffix} = %{version}-%{release} -Requires: mysql-server%{product_suffix} = %{version}-%{release} -Obsoletes: MySQL-test -Obsoletes: mysql-test < %{version}-%{release} -Obsoletes: mysql-test-advanced < %{version}-%{release} -Provides: mysql-test - -%description -n mysql-test%{product_suffix} -MySQL is a multi-user, multi-threaded SQL database server. This -package contains the regression test suite distributed with -the MySQL sources. - -%prep -%setup -T -a 0 -c -n %{src_dir} - -cd %{src_dir} # read about "%setup -n" -# %patch1 -p1 -%patch2 -p1 -# %patch4 -p1 TODO / FIXME: if wanted, needs to be adapted to new mysql-test-run setup -%patch5 -p1 -%patch6 -p1 -# %patch8 -p1 -# %patch9 -p1 -# %patch10 -p1 -# %patch13 -p1 -# %patch14 -p1 -%patch16 -p1 -%patch17 -p1 -%patch18 -p1 -%patch19 -p1 - -# workaround for upstream bug #56342 -rm -f mysql-test/t/ssl_8k_key-master.opt - -%build - -# Fail quickly and obviously if user tries to build as root -%if %runselftest - if [ x"`id -u`" = x0 ]; then - echo "The MySQL regression tests may fail if run as root." - echo "If you really need to build the RPM as root, use" - echo "--define='runselftest 0' to skip the regression tests." - exit 1 - fi -%endif - -# Be strict about variables, bail at earliest opportunity, etc. -set -eu - -# Optional package files -touch optional-files-devel - -# -# Set environment in order of preference, MYSQL_BUILD_* first, then variable -# name, finally a default. RPM_OPT_FLAGS is assumed to be a part of the -# default RPM build environment. -# -# We set CXX=gcc by default to support so-called 'generic' binaries, where we -# do not have a dependancy on libgcc/libstdc++. This only works while we do -# not require C++ features such as exceptions, and may need to be removed at -# a later date. -# - -# This is a hack, $RPM_OPT_FLAGS on ia64 hosts contains flags which break -# the compile in cmd-line-utils/readline - needs investigation, but for now -# we simply unset it and use those specified directly in cmake. -%if "%{_arch}" == "ia64" -RPM_OPT_FLAGS= -%endif - -# This goes in sync with Patch19. "rm" is faster than "patch" for this. -rm -rf %{src_dir}/mysql-test/lib/v1 - -export PATH=${MYSQL_BUILD_PATH:-$PATH} -export CC=${MYSQL_BUILD_CC:-${CC:-gcc}} -export CXX=${MYSQL_BUILD_CXX:-${CXX:-gcc}} -export CFLAGS=${MYSQL_BUILD_CFLAGS:-${CFLAGS:-$RPM_OPT_FLAGS}} -# Following "%ifarch" developed by RedHat, MySQL/Oracle does not support/maintain Linux/Sparc: -# gcc seems to have some bugs on sparc as of 4.4.1, back off optimization -# submitted as bz #529298 -%ifarch sparc sparcv9 sparc64 -CFLAGS=`echo $CFLAGS| sed -e "s|-O2|-O1|g" ` -%endif -export CXXFLAGS=${MYSQL_BUILD_CXXFLAGS:-${CXXFLAGS:-$RPM_OPT_FLAGS -felide-constructors -fno-exceptions -fno-rtti}} -export LDFLAGS=${MYSQL_BUILD_LDFLAGS:-${LDFLAGS:-}} -export CMAKE=${MYSQL_BUILD_CMAKE:-${CMAKE:-cmake}} -export MAKE_JFLAG=${MYSQL_BUILD_MAKE_JFLAG:-%{?_smp_mflags}} - -# Build debug mysqld and libmysqld.a -mkdir debug -( - cd debug - # Attempt to remove any optimisation flags from the debug build - CFLAGS=`echo " ${CFLAGS} " | \ - sed -e 's/ -O[0-9]* / /' \ - -e 's/ -unroll2 / /' \ - -e 's/ -ip / /' \ - -e 's/^ //' \ - -e 's/ $//'` - CXXFLAGS=`echo " ${CXXFLAGS} " | \ - sed -e 's/ -O[0-9]* / /' \ - -e 's/ -unroll2 / /' \ - -e 's/ -ip / /' \ - -e 's/^ //' \ - -e 's/ $//'` - # XXX: MYSQL_UNIX_ADDR should be in cmake/* but mysql_version is included before - # XXX: install_layout so we can't just set it based on INSTALL_LAYOUT=RPM - ${CMAKE} ../%{src_dir} -DBUILD_CONFIG=mysql_release -DINSTALL_LAYOUT=RPM \ - -DCMAKE_BUILD_TYPE=Debug \ - -DMYSQL_UNIX_ADDR="%{mysqldatadir}/mysql.sock" \ - -DFEATURE_SET="%{feature_set}" \ - -DCOMPILATION_COMMENT="%{compilation_comment_debug}" \ - -DMYSQL_SERVER_SUFFIX="%{server_suffix}" - echo BEGIN_DEBUG_CONFIG ; egrep '^#define' include/config.h ; echo END_DEBUG_CONFIG - make ${MAKE_JFLAG} VERBOSE=1 -) -# Build full release -mkdir release -( - cd release - # XXX: MYSQL_UNIX_ADDR should be in cmake/* but mysql_version is included before - # XXX: install_layout so we can't just set it based on INSTALL_LAYOUT=RPM - ${CMAKE} ../%{src_dir} -DBUILD_CONFIG=mysql_release -DINSTALL_LAYOUT=RPM \ - -DCMAKE_BUILD_TYPE=RelWithDebInfo \ - -DMYSQL_UNIX_ADDR="%{mysqldatadir}/mysql.sock" \ - -DFEATURE_SET="%{feature_set}" \ - -DCOMPILATION_COMMENT="%{compilation_comment_release}" \ - -DMYSQL_SERVER_SUFFIX="%{server_suffix}" - echo BEGIN_NORMAL_CONFIG ; egrep '^#define' include/config.h ; echo END_NORMAL_CONFIG - make ${MAKE_JFLAG} VERBOSE=1 -) - -# TODO / FIXME: Do we need "scriptstub"? -gcc $CFLAGS $LDFLAGS -o scriptstub "-DLIBDIR=\"%{_libdir}/mysql\"" %{SOURCE4} - -# TODO / FIXME: "libmysqld.so" should have been produced above -# regular build will make libmysqld.a but not libmysqld.so :-( -cd release -mkdir libmysqld/work -cd libmysqld/work -# "libmysqld" provides the same ABI as "libmysqlclient", but it implements the server: -# The shared object is identified by the full version, -# for linkage selection the first two levels are sufficient so that upgrades are possible -# (see "man ld", option "-soname"). -SO_FULL='%{mysql_version}' -SO_USE=`echo $SO_FULL | sed -e 's/\([0-9]\.[0-9]\)\.[0-9]*/\1/'` -# These two modules should pull everything else which is needed: -ar -x ../libmysqld.a client.c.o signal_handler.cc.o -gcc $CFLAGS $LDFLAGS -shared -Wl,-soname,libmysqld.so.$SO_USE -o libmysqld.so.$SO_FULL \ - *.o ../libmysqld.a \ - -lpthread -lcrypt -laio -lnsl -lssl -lcrypto -lz -lrt -lstdc++ -lm -lc -# this is to check that we built a complete library -cp %{SOURCE9} . -PROGNAME=`basename %{SOURCE9} .c` -ln -s libmysqld.so.$SO_FULL libmysqld.so.$SO_USE -gcc -I../../include -I../../../%{src_dir}/include $CFLAGS -o $PROGNAME %{SOURCE9} libmysqld.so.$SO_USE -LD_LIBRARY_PATH=. ldd $PROGNAME -cd ../.. -cd .. - -# TODO / FIXME: autotools only? -# make check - -# TODO / FIXME: Test suite is run elsewhere in release builds - -# do we need this for users who want to build from source? -# Also, check whether MTR_BUILD_THREAD=auto would solve all issues -%if %runselftest - # hack to let 32- and 64-bit tests run concurrently on same build machine - case `uname -m` in - ppc64 | s390x | x86_64 | sparc64 ) - MTR_BUILD_THREAD=7 - ;; - *) - MTR_BUILD_THREAD=11 - ;; - esac - export MTR_BUILD_THREAD - - # if you want to change which tests are run, look at mysql-5.5-testing.patch too. - (cd release && make test-bt-fast ) -%endif - -%install -RBR=$RPM_BUILD_ROOT -MBD=$RPM_BUILD_DIR/%{src_dir} -[ -n "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT - -# Ensure that needed directories exists -# TODO / FIXME: needed ? install -d $RBR%{mysqldatadir}/mysql -# TODO / FIXME: needed ? install -d $RBR%{_datadir}/mysql-test -# TODO / FIXME: needed ? install -d $RBR%{_datadir}/mysql/SELinux/RHEL4 -# TODO / FIXME: needed ? install -d $RBR%{_includedir} -# TODO / FIXME: needed ? install -d $RBR%{_libdir} -# TODO / FIXME: needed ? install -d $RBR%{_mandir} -# TODO / FIXME: needed ? install -d $RBR%{_sbindir} - -# Install all binaries -( - cd $MBD/release - make DESTDIR=$RBR install -) - -# For gcc builds, include libgcc.a in the devel subpackage (BUG 4921). Do -# this in a sub-shell to ensure we don't pollute the install environment -# with compiler bits. -( - PATH=${MYSQL_BUILD_PATH:-$PATH} - CC=${MYSQL_BUILD_CC:-${CC:-gcc}} - CFLAGS=${MYSQL_BUILD_CFLAGS:-${CFLAGS:-$RPM_OPT_FLAGS}} - if "${CC}" -v 2>&1 | grep '^gcc.version' >/dev/null 2>&1; then - libgcc=`${CC} ${CFLAGS} --print-libgcc-file` - if [ -f ${libgcc} ]; then - mkdir -p $RBR%{_libdir}/mysql - install -m 644 ${libgcc} $RBR%{_libdir}/mysql/libmygcc.a - echo "%{_libdir}/mysql/libmygcc.a" >>optional-files-devel - fi - fi -) - -# multilib header hacks -# we only apply this to known Red Hat multilib arches, per bug #181335 -case `uname -i` in - i386 | x86_64 | ppc | ppc64 | s390 | s390x | sparc | sparc64 ) - mv $RPM_BUILD_ROOT/usr/include/mysql/my_config.h $RPM_BUILD_ROOT/usr/include/mysql/my_config_`uname -i`.h - install -m 644 %{SOURCE5} $RPM_BUILD_ROOT/usr/include/mysql/ - ;; - *) - ;; -esac - -mkdir -p $RPM_BUILD_ROOT/var/log -touch $RPM_BUILD_ROOT/var/log/mysqld.log - -# List the installed tree for RPM package maintenance purposes. -find $RPM_BUILD_ROOT -print | sed "s|^$RPM_BUILD_ROOT||" | sort > ROOTFILES - -mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d -mkdir -p $RPM_BUILD_ROOT/var/run/mysqld -install -m 0755 -d $RPM_BUILD_ROOT/var/lib/mysql -install -m 0755 %{SOURCE2} $RPM_BUILD_ROOT/etc/rc.d/init.d/mysqld -install -m 0644 %{SOURCE3} $RPM_BUILD_ROOT/etc/my.cnf -# obsolete: mv $RPM_BUILD_ROOT/usr/sql-bench $RPM_BUILD_ROOT%{_datadir}/sql-bench # 'sql-bench' is dropped -# obsolete: mv $RPM_BUILD_ROOT/usr/mysql-test $RPM_BUILD_ROOT%{_datadir}/mysql-test # 'mysql-test' is there already -# 5.1.32 forgets to install the mysql-test README file -# obsolete: install -m 0644 mysql-test/README $RPM_BUILD_ROOT%{_datadir}/mysql-test/README # 'README' is there already - -mv ${RPM_BUILD_ROOT}%{_bindir}/mysqlbug ${RPM_BUILD_ROOT}%{_libdir}/mysql/mysqlbug -install -m 0755 scriptstub ${RPM_BUILD_ROOT}%{_bindir}/mysqlbug -mv ${RPM_BUILD_ROOT}%{_bindir}/mysql_config ${RPM_BUILD_ROOT}%{_libdir}/mysql/mysql_config -install -m 0755 scriptstub ${RPM_BUILD_ROOT}%{_bindir}/mysql_config - -rm -f ${RPM_BUILD_ROOT}%{_libdir}/mysql/libmysqld.a -SO_FULL='%{mysql_version}' -SO_USE=`echo $SO_FULL | sed -e 's/\([0-9]\.[0-9]\)\.[0-9]*/\1/'` -install -m 0755 release/libmysqld/work/libmysqld.so.$SO_FULL ${RPM_BUILD_ROOT}%{_libdir}/mysql/libmysqld.so.$SO_FULL -ln -s libmysqld.so.$SO_FULL ${RPM_BUILD_ROOT}%{_libdir}/mysql/libmysqld.so.$SO_USE -ln -s libmysqld.so.$SO_USE ${RPM_BUILD_ROOT}%{_libdir}/mysql/libmysqld.so - -rm -f ${RPM_BUILD_ROOT}%{_bindir}/comp_err -rm -f ${RPM_BUILD_ROOT}%{_mandir}/man1/comp_err.1* -rm -f ${RPM_BUILD_ROOT}%{_bindir}/make_win_binary_distribution -rm -f ${RPM_BUILD_ROOT}%{_bindir}/make_win_src_distribution -rm -f ${RPM_BUILD_ROOT}%{_mandir}/man1/make_win_bin_dist.1* -rm -f ${RPM_BUILD_ROOT}%{_mandir}/man1/make_win_src_distribution.1* -rm -f ${RPM_BUILD_ROOT}%{_libdir}/mysql/libmysqlclient*.la -rm -f ${RPM_BUILD_ROOT}%{_libdir}/mysql/*.a -rm -f ${RPM_BUILD_ROOT}%{_libdir}/mysql/plugin/*.la -rm -f ${RPM_BUILD_ROOT}%{_libdir}/mysql/plugin/*.a -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/binary-configure -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/make_binary_distribution -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/make_sharedlib_distribution -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/mi_test_all* -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/ndb-config-2-node.ini -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/mysql.server -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/mysqld_multi.server -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/MySQL-shared-compat.spec -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/*.plist -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/preinstall -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/postinstall -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/mysql-*.spec -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/mysql-log-rotate -rm -f ${RPM_BUILD_ROOT}%{_datadir}/mysql/ChangeLog -rm -f ${RPM_BUILD_ROOT}%{_mandir}/man1/mysql-stress-test.pl.1* -rm -f ${RPM_BUILD_ROOT}%{_mandir}/man1/mysql-test-run.pl.1* -rm -rf ${RPM_BUILD_ROOT}%{_datadir}/mysql/solaris - -mkdir -p $RPM_BUILD_ROOT/etc/ld.so.conf.d -echo "%{_libdir}/mysql" > $RPM_BUILD_ROOT/etc/ld.so.conf.d/%{name}-%{_arch}.conf - -# The below *only* applies to builds not done by MySQL / Sun / Oracle: -# copy additional docs into build tree so %%doc will find them -# cp %{SOURCE6} README.mysql-docs - -%clean -[ -n "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT - -%pre -n mysql-server%{product_suffix} - -# Check if we can safely upgrade. An upgrade is only safe if it's from one -# of our RPMs in the same version family. - -# Handle both ways of spelling the capability. -installed=`rpm -q --whatprovides mysql-server 2> /dev/null` -if [ $? -ne 0 -o -z "$installed" ]; then - installed=`rpm -q --whatprovides MySQL-server 2> /dev/null` -fi -if [ $? -eq 0 -a -n "$installed" ]; then - installed=`echo $installed | sed 's/\([^ ]*\) .*/\1/'` # Tests have shown duplicated package names - vendor=`rpm -q --queryformat='%{VENDOR}' "$installed" 2>&1` - version=`rpm -q --queryformat='%{VERSION}' "$installed" 2>&1` - myvendor='%{mysql_vendor}' - myversion='%{mysql_version}' - - old_family=`echo $version \ - | sed -n -e 's,^\([1-9][0-9]*\.[0-9][0-9]*\)\..*$,\1,p'` - new_family=`echo $myversion \ - | sed -n -e 's,^\([1-9][0-9]*\.[0-9][0-9]*\)\..*$,\1,p'` - - [ -z "$vendor" ] && vendor='<unknown>' - [ -z "$old_family" ] && old_family="<unrecognized version $version>" - [ -z "$new_family" ] && new_family="<bad package specification: version $myversion>" - - error_text= - if [ "$vendor" != "$myvendor" ]; then - error_text="$error_text -The current MySQL server package is provided by a different -vendor ($vendor) than $myvendor. -Some files may be installed to different locations, including log -files and the service startup script in %{_sysconfdir}/init.d/. -" - fi - - if [ "$old_family" != "$new_family" ]; then - error_text="$error_text -Upgrading directly from MySQL $old_family to MySQL $new_family may not -be safe in all cases. A manual dump and restore using mysqldump is -recommended. It is important to review the MySQL manual's Upgrading -section for version-specific incompatibilities. -" - fi - - if [ -n "$error_text" ]; then - cat <<HERE >&2 - -****************************************************************** -A MySQL server package ($installed) is installed. -$error_text -A manual upgrade is required. - -- Ensure that you have a complete, working backup of your data and my.cnf - files -- Shut down the MySQL server cleanly -- Remove the existing MySQL packages. Usually this command will - list the packages you should remove: - rpm -qa | grep -i '^mysql-' - - You may choose to use 'rpm --nodeps -ev <package-name>' to remove - the package which contains the mysqlclient shared library. The - library will be reinstalled by the MySQL-shared-compat package. -- Install the new MySQL packages supplied by $myvendor -- Ensure that the MySQL server is started -- Run the 'mysql_upgrade' program - -This is a brief description of the upgrade process. Important details -can be found in the MySQL manual, in the Upgrading section. -****************************************************************** -HERE - exit 1 - fi -fi - -/usr/sbin/groupadd -g 27 -o -r mysql >/dev/null 2>&1 || : -/usr/sbin/useradd -M -N -g mysql -o -r -d /var/lib/mysql -s /bin/bash \ - -c "MySQL Server" -u 27 mysql >/dev/null 2>&1 || : - -%post -n mysql-libs%{product_suffix} -/sbin/ldconfig - -%post -n mysql-server%{product_suffix} -if [ $1 = 1 ]; then - /sbin/chkconfig --add mysqld -fi -/bin/chmod 0755 /var/lib/mysql -/bin/touch /var/log/mysqld.log - -%preun -n mysql-server%{product_suffix} -if [ $1 = 0 ]; then - /sbin/service mysqld stop >/dev/null 2>&1 - /sbin/chkconfig --del mysqld -fi - -%postun -n mysql-libs%{product_suffix} -if [ $1 = 0 ] ; then - /sbin/ldconfig -fi - -%postun -n mysql-server%{product_suffix} -if [ $1 -ge 1 ]; then - /sbin/service mysqld condrestart >/dev/null 2>&1 || : -fi - - -%files -n mysql%{product_suffix} -%defattr(-,root,root) -%doc %{license_files_server} - -# The below file *only* applies to builds not done by MySQL / Sun / Oracle: -# %doc README.mysql-docs - -%{_bindir}/msql2mysql -%{_bindir}/mysql -%{_bindir}/mysql_config -%{_bindir}/mysql_find_rows -%{_bindir}/mysql_waitpid -%{_bindir}/mysqlaccess -%{_bindir}/mysqlaccess.conf -%{_bindir}/mysqladmin -%{_bindir}/mysqlbinlog -%{_bindir}/mysqlcheck -%{_bindir}/mysqldump -%{_bindir}/mysqlimport -%{_bindir}/mysqlshow -%{_bindir}/mysqlslap -%{_bindir}/my_print_defaults - -%{_mandir}/man1/mysql.1* -%{_mandir}/man1/mysql_config.1* -%{_mandir}/man1/mysql_find_rows.1* -%{_mandir}/man1/mysql_waitpid.1* -%{_mandir}/man1/mysqlaccess.1* -%{_mandir}/man1/mysqladmin.1* -%{_mandir}/man1/mysqldump.1* -%{_mandir}/man1/mysqlshow.1* -%{_mandir}/man1/mysqlslap.1* -%{_mandir}/man1/my_print_defaults.1* - -%{_libdir}/mysql/mysqlbug -%{_libdir}/mysql/mysql_config - -%files -n mysql-libs%{product_suffix} -%defattr(-,root,root) -%doc %{license_files_server} -# although the default my.cnf contains only server settings, we put it in the -# libs package because it can be used for client settings too. -%config(noreplace) /etc/my.cnf -%dir %{_libdir}/mysql -%{_libdir}/mysql/libmysqlclient*.so.* -/etc/ld.so.conf.d/* - -%dir %{_datadir}/mysql -%{_datadir}/mysql/english -%lang(cs) %{_datadir}/mysql/czech -%lang(da) %{_datadir}/mysql/danish -%lang(nl) %{_datadir}/mysql/dutch -%lang(et) %{_datadir}/mysql/estonian -%lang(fr) %{_datadir}/mysql/french -%lang(de) %{_datadir}/mysql/german -%lang(el) %{_datadir}/mysql/greek -%lang(hu) %{_datadir}/mysql/hungarian -%lang(it) %{_datadir}/mysql/italian -%lang(ja) %{_datadir}/mysql/japanese -%lang(ko) %{_datadir}/mysql/korean -%lang(no) %{_datadir}/mysql/norwegian -%lang(no) %{_datadir}/mysql/norwegian-ny -%lang(pl) %{_datadir}/mysql/polish -%lang(pt) %{_datadir}/mysql/portuguese -%lang(ro) %{_datadir}/mysql/romanian -%lang(ru) %{_datadir}/mysql/russian -%lang(sr) %{_datadir}/mysql/serbian -%lang(sk) %{_datadir}/mysql/slovak -%lang(es) %{_datadir}/mysql/spanish -%lang(sv) %{_datadir}/mysql/swedish -%lang(uk) %{_datadir}/mysql/ukrainian -%{_datadir}/mysql/charsets - -%files -n mysql-server%{product_suffix} -f release/support-files/plugins.files -%defattr(-,root,root) -%doc release/support-files/*.cnf -%if 0%{?commercial} - %doc %{_datadir}/info/mysql.info* -%endif -%doc %{src_dir}/Docs/ChangeLog -%doc %{src_dir}/Docs/INFO_SRC* -%doc release/Docs/INFO_BIN* - -%{_bindir}/myisamchk -%{_bindir}/myisam_ftdump -%{_bindir}/myisamlog -%{_bindir}/myisampack -%{_bindir}/mysql_convert_table_format -%{_bindir}/mysql_fix_extensions -%{_bindir}/mysql_install_db -%{_bindir}/mysql_plugin -%{_bindir}/mysql_secure_installation -%if %{commercial} -%else -%{_bindir}/mysql_setpermission -%endif -%{_bindir}/mysql_tzinfo_to_sql -%{_bindir}/mysql_upgrade -%{_bindir}/mysql_zap -%{_bindir}/mysqlbug -%{_bindir}/mysqldumpslow -%{_bindir}/mysqld_multi -%{_bindir}/mysqld_safe -%{_bindir}/mysqlhotcopy -%{_bindir}/mysqltest -%{_bindir}/innochecksum -%{_bindir}/perror -%{_bindir}/replace -%{_bindir}/resolve_stack_dump -%{_bindir}/resolveip - -/usr/libexec/mysqld -/usr/libexec/mysqld-debug -%{_libdir}/mysql/plugin/daemon_example.ini - -%if %{WITH_TCMALLOC} -%{_libdir}/mysql/%{malloc_lib_target} -%endif - -# obsolete by "-f release/support-files/plugins.files" above -# %{_libdir}/mysql/plugin - -%{_mandir}/man1/msql2mysql.1* -%{_mandir}/man1/myisamchk.1* -%{_mandir}/man1/myisamlog.1* -%{_mandir}/man1/myisampack.1* -%{_mandir}/man1/mysql_convert_table_format.1* -%{_mandir}/man1/myisam_ftdump.1* -%{_mandir}/man1/mysql.server.1* -%{_mandir}/man1/mysql_fix_extensions.1* -%{_mandir}/man1/mysql_install_db.1* -%{_mandir}/man1/mysql_plugin.1* -%{_mandir}/man1/mysql_secure_installation.1* -%{_mandir}/man1/mysql_upgrade.1* -%{_mandir}/man1/mysql_zap.1* -%{_mandir}/man1/mysqlbug.1* -%{_mandir}/man1/mysqldumpslow.1* -%{_mandir}/man1/mysqlbinlog.1* -%{_mandir}/man1/mysqlcheck.1* -%{_mandir}/man1/mysqld_multi.1* -%{_mandir}/man1/mysqld_safe.1* -%{_mandir}/man1/mysqlhotcopy.1* -%{_mandir}/man1/mysqlimport.1* -%{_mandir}/man1/mysqlman.1* -%if %{commercial} -%else -%{_mandir}/man1/mysql_setpermission.1* -%endif -%{_mandir}/man1/mysqltest.1* -%{_mandir}/man1/innochecksum.1* -%{_mandir}/man1/perror.1* -%{_mandir}/man1/replace.1* -%{_mandir}/man1/resolve_stack_dump.1* -%{_mandir}/man1/resolveip.1* -%{_mandir}/man1/mysql_tzinfo_to_sql.1* -%{_mandir}/man8/mysqld.8* - -%{_datadir}/mysql/errmsg-utf8.txt -%{_datadir}/mysql/fill_help_tables.sql -%{_datadir}/mysql/magic -%{_datadir}/mysql/mysql_system_tables.sql -%{_datadir}/mysql/mysql_system_tables_data.sql -%{_datadir}/mysql/mysql_test_data_timezone.sql -%{_datadir}/mysql/my-*.cnf -%{_datadir}/mysql/config.*.ini - -/etc/rc.d/init.d/mysqld -%attr(0755,mysql,mysql) %dir /var/run/mysqld -%attr(0755,mysql,mysql) %dir /var/lib/mysql -%attr(0640,mysql,mysql) %config(noreplace) %verify(not md5 size mtime) /var/log/mysqld.log - -# TODO / FIXME: Do we need "libmygcc.a"? If yes, append "-f optional-files-devel" -# and fix the "rm -f" list in the "install" section. -%files -n mysql-devel%{product_suffix} -%defattr(-,root,root) -/usr/include/mysql -/usr/share/aclocal/mysql.m4 -%{_libdir}/mysql/libmysqlclient*.so - -%files -n mysql-embedded%{product_suffix} -%defattr(-,root,root) -%doc %{license_files_server} -%{_libdir}/mysql/libmysqld.so.* -%{_bindir}/mysql_embedded - -%files -n mysql-embedded-devel%{product_suffix} -%defattr(-,root,root) -%{_libdir}/mysql/libmysqld.so -%{_bindir}/mysql_client_test_embedded -%{_bindir}/mysqltest_embedded -%{_mandir}/man1/mysql_client_test_embedded.1* -%{_mandir}/man1/mysqltest_embedded.1* - -%files -n mysql-test%{product_suffix} -%defattr(-,root,root) -%{_bindir}/mysql_client_test -%attr(-,mysql,mysql) %{_datadir}/mysql-test - -%{_mandir}/man1/mysql_client_test.1* - -%changelog -* Tue Nov 05 2013 Balasubramanian Kandasamy <balasubramanian.kandasamy@oracle.com> -- Removed non gpl file mysql.info from community packages - -* Wed Jul 10 2013 Balasubramanian Kandasamy <balasubramanian.kandasamy@oracle.com> -- Removed directory /usr/share/mysql/solaris/postinstall-solaris to resolve build - error - -* Thu Dec 7 2012 Joerg Bruehe <joerg.bruehe@oracle.com> -- Change the way in which "libmysqld.so" is created: Using all object modules - was wrong, gcc / ld can resolve the dependencies from "libmysqld.a". - Also, identify the ".so" version from the MySQL version, "0.0.1" was wrong. - Bug#15972480 - -* Tue Sep 18 2012 Joerg Bruehe <joerg.bruehe@oracle.com> -- Restrict the vendor check to Oracle: There is no history here - which we have to allow for. - -* Thu Jul 26 2012 Joerg Bruehe <joerg.bruehe@oracle.com> -- Add the vendor and release series checks from the traditional MySQL RPM - spec file, to protect against errors happening during upgrades. -- Do some code alignment with the traditional MySQL RPM spec file, - to make synchronous maintenance (and possibly even integration?) easier. - -* Mon Feb 13 2012 Joerg Bruehe <joerg.bruehe@oracle.com> -- Add "Provides:" lines for the generic names of the subpackages, - independent of "product_suffix". - -* Tue Feb 7 2012 Joerg Bruehe <joerg.bruehe@oracle.com> -- Make "mysql_setpermission" and its man page appear in GPL builds only. - -* Thu Nov 24 2011 Joerg Bruehe <joerg.bruehe@oracle.com> -- Add two patches (#18 + #19) regarding the test suite; - version 1 of "mysql-test-run.pl" had to go because the auto-detection - of Perl dependencies does not handle differences between run directory - and delivery location. - -* Thu Nov 3 2011 Joerg Bruehe <joerg.bruehe@oracle.com> -- Adapt from MySQL 5.1 to 5.5, tested using 5.5.17: - - Done by the MySQL Build Team at Oracle: - set as packager, set copyright owner and related info; - - handle command line options, allowing different configurations, platforms, ... - - configurations will show up in the file name as "product_suffix", - - use "-n" for all subpackage specifications, - - license may be GPL or commercial, mention that in the description, - the license output and the included license files will vary, - - commercial is "nosource", - - improve "requires" listings for different platforms, - - explicitly use "product_suffix" in the "requires" entries; - - adapt to 5.5 changes in features and function: - - remove "mysql-bench" package (files are outdated, not maintained), - - no InnoDB plugin, - - the set of plugins will vary by configuration, to control the "server" - package contents use "-f release/support-files/plugins.files" in the - "files" section, - - remove "mysqlmanager", "mysql_fix_privilege_tables", - - add "mysql_embedded", "mysql-plugin", "mysqlaccess.conf", "magic", - - "errmsg.txt" is now in UTF8: "errmsg-utf8.txt", - - adapt patches to changed code where needed, rename these to include "5.5", - - stop using patches which are not applicable to 5.5; - - 5.5 uses a different way of building: - - autotools are replaced by cmake, - - both a "release" and a "debug" server are built in separate subtrees - ("out of source"!), this also affects path names in further handling, - - the debug server is added to the "server" subpackage, - - add "mysql-5.5-libdir.patch" to handle file placement at user site. - -* Mon Dec 20 2010 Tom Lane <tgl@redhat.com> 5.1.52-1.1 -- Update to MySQL 5.1.52, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-52.html - including numerous small security issues -Resolves: #652553 -- Sync with current Fedora package; this includes: -- Duplicate COPYING and EXCEPTIONS-CLIENT in -libs and -embedded subpackages, - to ensure they are available when any subset of mysql RPMs are installed, - per revised packaging guidelines -- Allow init script's STARTTIMEOUT/STOPTIMEOUT to be overridden from sysconfig - -* Thu Jul 15 2010 Tom Lane <tgl@redhat.com> 5.1.47-4 -- Add backported patch for CVE-2010-2008 (upstream bug 53804) -Resolves: #614215 -- Add BuildRequires perl(Time::HiRes) ... seems to no longer be installed - by just pulling in perl. - -* Mon Jun 28 2010 Tom Lane <tgl@redhat.com> 5.1.47-3 -- Add -p "$mypidfile" to initscript's status call to improve corner cases. - (Note: can't be fixed in Fedora until 595597 is fixed there.) -Resolves: #596008 - -* Mon Jun 7 2010 Tom Lane <tgl@redhat.com> 5.1.47-2 -- Add back "partition" storage engine -Resolves: #598585 -- Fix broken "federated" storage engine plugin -Resolves: #587170 -- Read all certificates in SSL certificate files, to support chained certs -Resolves: #598656 - -* Mon May 24 2010 Tom Lane <tgl@redhat.com> 5.1.47-1 -- Update to MySQL 5.1.47, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-47.html - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-46.html - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-45.html - including fixes for CVE-2010-1621, CVE-2010-1626, - CVE-2010-1848, CVE-2010-1849, CVE-2010-1850 -Resolves: #590598 -- Create mysql group explicitly in pre-server script, to ensure correct GID - -* Mon Mar 8 2010 Tom Lane <tgl@redhat.com> 5.1.44-2 -- Update to MySQL 5.1.44, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-44.html -Resolves: #565554 -- Remove mysql.info, which is not freely redistributable -Related: #560181 -- Revert broken upstream fix for their bug 45058 -Related: #566547 -- Bring init script into some modicum of compliance with Fedora/LSB standards -Resolves: #557711 -Resolves: #562749 - -* Mon Feb 15 2010 Tom Lane <tgl@redhat.com> 5.1.43-2 -- Update to MySQL 5.1.43, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-43.html -Resolves: #565554 -- Remove mysql-cluster, which is no longer supported by upstream in this - source distribution. If we want it we'll need a separate SRPM for it. -Resolves: #565210 - -* Fri Jan 29 2010 Tom Lane <tgl@redhat.com> 5.1.42-7 -- Add backported patch for CVE-2008-7247 (upstream bug 39277) -Resolves: #549329 -- Use non-expired certificates for SSL testing (upstream bug 50702) - -* Tue Jan 26 2010 Tom Lane <tgl@redhat.com> 5.1.42-6 -- Emit explicit error message if user tries to build RPM as root -Resolves: #558915 - -* Wed Jan 20 2010 Tom Lane <tgl@redhat.com> 5.1.42-5 -- Correct Source0: tag and comment to reflect how to get the tarball - -* Fri Jan 8 2010 Tom Lane <tgl@redhat.com> 5.1.42-4 -- Sync with current Fedora build, including: -- Update to MySQL 5.1.42, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-42.html -- Disable symbolic links by default in /etc/my.cnf -Resolves: #553653 -- Remove static libraries (.a files) from package, per packaging guidelines -- Change %%define to %%global, per packaging guidelines -- Disable building the innodb plugin; it tickles assorted gcc bugs and - doesn't seem entirely ready for prime time anyway. -Resolves: #553632 -- Start mysqld_safe with --basedir=/usr, to avoid unwanted SELinux messages - (see 547485) -- Stop waiting during "service mysqld start" if mysqld_safe exits -Resolves: #544095 - -* Mon Nov 23 2009 Tom Lane <tgl@redhat.com> 5.1.41-1 -- Update to MySQL 5.1.41, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-41.html - including fixes for CVE-2009-4019 -Resolves: #549327 -- Don't set old_passwords=1; we aren't being bug-compatible with 3.23 anymore -Resolves: #540735 - -* Tue Nov 10 2009 Tom Lane <tgl@redhat.com> 5.1.40-1 -- Update to MySQL 5.1.40, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-40.html -- Do not force the --log-error setting in mysqld init script -Resolves: #533736 - -* Sat Oct 17 2009 Tom Lane <tgl@redhat.com> 5.1.39-4 -- Replace kluge fix for ndbd sparc crash with a real fix (mysql bug 48132) - -* Thu Oct 15 2009 Tom Lane <tgl@redhat.com> 5.1.39-3 -- Work around two different compiler bugs on sparc, one by backing off - optimization from -O2 to -O1, and the other with a klugy patch -Related: #529298, #529299 -- Clean up bogosity in multilib stub header support: ia64 should not be - listed (it's not multilib), sparc and sparc64 should be - -* Wed Sep 23 2009 Tom Lane <tgl@redhat.com> 5.1.39-2 -- Work around upstream bug 46895 by disabling outfile_loaddata test - -* Tue Sep 22 2009 Tom Lane <tgl@redhat.com> 5.1.39-1 -- Update to MySQL 5.1.39, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-39.html - -* Mon Aug 31 2009 Tom Lane <tgl@redhat.com> 5.1.37-5 -- Work around unportable assumptions about stpcpy(); re-enable main.mysql test -- Clean up some obsolete parameters to the configure script - -* Sat Aug 29 2009 Tom Lane <tgl@redhat.com> 5.1.37-4 -- Remove one misguided patch; turns out I was chasing a glibc bug -- Temporarily disable "main.mysql" test; there's something broken there too, - but we need to get mysql built in rawhide for dependency reasons - -* Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 5.1.37-3 -- rebuilt with new openssl - -* Fri Aug 14 2009 Tom Lane <tgl@redhat.com> 5.1.37-2 -- Add a couple of patches to improve the probability of the regression tests - completing in koji builds - -* Sun Aug 2 2009 Tom Lane <tgl@redhat.com> 5.1.37-1 -- Update to MySQL 5.1.37, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-37.html - -* Sat Jul 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 5.1.36-2 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild - -* Fri Jul 10 2009 Tom Lane <tgl@redhat.com> 5.1.36-1 -- Update to MySQL 5.1.36, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-36.html - -* Sat Jun 6 2009 Tom Lane <tgl@redhat.com> 5.1.35-1 -- Update to MySQL 5.1.35, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-35.html -- Ensure that /var/lib/mysql is created with the right SELinux context -Resolves: #502966 - -* Fri May 15 2009 Tom Lane <tgl@redhat.com> 5.1.34-1 -- Update to MySQL 5.1.34, for various fixes described at - http://dev.mysql.com/doc/refman/5.1/en/news-5-1-34.html -- Increase startup timeout per bug #472222 - -* Wed Apr 15 2009 Tom Lane <tgl@redhat.com> 5.1.33-2 -- Increase stack size of ndbd threads for safety's sake. -Related: #494631 - -* Tue Apr 7 2009 Tom Lane <tgl@redhat.com> 5.1.33-1 -- Update to MySQL 5.1.33. -- Disable use of pthread_setschedparam; doesn't work the way code expects. -Related: #477624 - -* Wed Mar 4 2009 Tom Lane <tgl@redhat.com> 5.1.32-1 -- Update to MySQL 5.1.32. - -* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 5.1.31-2 -- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild - -* Fri Feb 13 2009 Tom Lane <tgl@redhat.com> 5.1.31-1 -- Update to MySQL 5.1.31. - -* Thu Jan 22 2009 Tom Lane <tgl@redhat.com> 5.1.30-2 -- hm, apparently --with-innodb and --with-ndbcluster are still needed - even though no longer documented ... - -* Thu Jan 22 2009 Tom Lane <tgl@redhat.com> 5.1.30-1 -- Update to MySQL 5.1.30. Note that this includes an ABI break for - libmysqlclient (it's now got .so major version 16). -- This also updates mysql for new openssl build - -* Wed Oct 1 2008 Tom Lane <tgl@redhat.com> 5.0.67-2 -- Build the "embedded server" library, and package it in a new sub-RPM - mysql-embedded, along with mysql-embedded-devel for devel support files. -Resolves: #149829 - -* Sat Aug 23 2008 Tom Lane <tgl@redhat.com> 5.0.67-1 -- Update to mysql version 5.0.67 -- Move mysql_config's man page to base package, again (apparently I synced - that change the wrong way while importing specfile changes for ndbcluster) - -* Sun Jul 27 2008 Tom Lane <tgl@redhat.com> 5.0.51a-2 -- Enable ndbcluster support -Resolves: #163758 -- Suppress odd crash messages during package build, caused by trying to - build dbug manual (which we don't install anyway) with dbug disabled -Resolves: #437053 -- Improve mysql.init to pass configured datadir to mysql_install_db, - and to force user=mysql for both mysql_install_db and mysqld_safe. -Related: #450178 - -* Mon Mar 3 2008 Tom Lane <tgl@redhat.com> 5.0.51a-1 -- Update to mysql version 5.0.51a - -* Mon Mar 3 2008 Tom Lane <tgl@redhat.com> 5.0.45-11 -- Fix mysql-stack-guard patch to work correctly on IA64 -- Fix mysql.init to wait correctly when socket is not in default place -Related: #435494 - -* Mon Mar 03 2008 Dennis Gilmore <dennis@ausil.us> 5.0.45-10 -- add sparc64 to 64 bit arches for test suite checking -- add sparc, sparcv9 and sparc64 to multilib handling - -* Thu Feb 28 2008 Tom Lane <tgl@redhat.com> 5.0.45-9 -- Fix the stack overflow problem encountered in January. It seems the real -issue is that the buildfarm machines were moved to RHEL5, which uses 64K not -4K pages on PPC, and because RHEL5 takes the guard area out of the requested -thread stack size we no longer had enough headroom. -Related: #435337 - -* Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 5.0.45-8 -- Autorebuild for GCC 4.3 - -* Tue Jan 8 2008 Tom Lane <tgl@redhat.com> 5.0.45-7 -- Unbelievable ... upstream still thinks that it's a good idea to have a - regression test that is guaranteed to begin failing come January 1. -- ... and it seems we need to raise STACK_MIN_SIZE again too. - -* Thu Dec 13 2007 Tom Lane <tgl@redhat.com> 5.0.45-6 -- Back-port upstream fixes for CVE-2007-5925, CVE-2007-5969, CVE-2007-6303. -Related: #422211 - -* Wed Dec 5 2007 Tom Lane <tgl@redhat.com> 5.0.45-5 -- Rebuild for new openssl - -* Sat Aug 25 2007 Tom Lane <tgl@redhat.com> 5.0.45-4 -- Seems we need explicit BuildRequires on gawk and procps now -- Rebuild to fix Fedora toolchain issues - -* Sun Aug 12 2007 Tom Lane <tgl@redhat.com> 5.0.45-3 -- Recent perl changes in rawhide mean we need a more specific BuildRequires - -* Thu Aug 2 2007 Tom Lane <tgl@redhat.com> 5.0.45-2 -- Update License tag to match code. -- Work around recent Fedora change that makes "open" a macro name. - -* Sun Jul 22 2007 Tom Lane <tgl@redhat.com> 5.0.45-1 -- Update to MySQL 5.0.45 -Resolves: #246535 -- Move mysql_config's man page to base package -Resolves: #245770 -- move my_print_defaults to base RPM, for consistency with Stacks packaging -- mysql user is no longer deleted at RPM uninstall -Resolves: #241912 - -* Thu Mar 29 2007 Tom Lane <tgl@redhat.com> 5.0.37-2 -- Use a less hacky method of getting default values in initscript -Related: #233771, #194596 -- Improve packaging of mysql-libs per suggestions from Remi Collet -Resolves: #233731 -- Update default /etc/my.cnf ([mysql.server] has been bogus for a long time) - -* Mon Mar 12 2007 Tom Lane <tgl@redhat.com> 5.0.37-1 -- Update to MySQL 5.0.37 -Resolves: #231838 -- Put client library into a separate mysql-libs RPM to reduce dependencies -Resolves: #205630 - -* Fri Feb 9 2007 Tom Lane <tgl@redhat.com> 5.0.33-1 -- Update to MySQL 5.0.33 -- Install band-aid fix for "view" regression test designed to fail after 2006 -- Don't chmod -R the entire database directory tree on every startup -Related: #221085 -- Fix unsafe use of install-info -Resolves: #223713 -- Cope with new automake in F7 -Resolves: #224171 - -* Thu Nov 9 2006 Tom Lane <tgl@redhat.com> 5.0.27-1 -- Update to MySQL 5.0.27 (see CVE-2006-4031, CVE-2006-4226, CVE-2006-4227) -Resolves: #202247, #202675, #203427, #203428, #203432, #203434, #208641 -- Fix init script to return status 1 on server start timeout -Resolves: #203910 -- Move mysqldumpslow from base package to mysql-server -Resolves: #193559 -- Adjust link options for BDB module -Resolves: #199368 - -* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 5.0.22-2.1 -- rebuild - -* Sat Jun 10 2006 Tom Lane <tgl@redhat.com> 5.0.22-2 -- Work around brew's tendency not to clean up failed builds completely, - by adding code in mysql-testing.patch to kill leftover mysql daemons. - -* Thu Jun 8 2006 Tom Lane <tgl@redhat.com> 5.0.22-1 -- Update to MySQL 5.0.22 (fixes CVE-2006-2753) -- Install temporary workaround for gcc bug on s390x (bz #193912) - -* Tue May 2 2006 Tom Lane <tgl@redhat.com> 5.0.21-2 -- Fix bogus perl Requires for mysql-test - -* Mon May 1 2006 Tom Lane <tgl@redhat.com> 5.0.21-1 -- Update to MySQL 5.0.21 - -* Mon Mar 27 2006 Tom Lane <tgl@redhat.com> 5.0.18-4 -- Modify multilib header hack to not break non-RH arches, per bug #181335 -- Remove logrotate script, per bug #180639. -- Add a new mysql-test RPM to carry the regression test files; - hack up test scripts as needed to make them run in /usr/share/mysql-test. - -* Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 5.0.18-2.1 -- bump again for double-long bug on ppc(64) - -* Thu Feb 9 2006 Tom Lane <tgl@redhat.com> 5.0.18-2 -- err-log option has been renamed to log-error, fix my.cnf and initscript - -* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 5.0.18-1.1 -- rebuilt for new gcc4.1 snapshot and glibc changes - -* Thu Jan 5 2006 Tom Lane <tgl@redhat.com> 5.0.18-1 -- Update to MySQL 5.0.18 - -* Thu Dec 15 2005 Tom Lane <tgl@redhat.com> 5.0.16-4 -- fix my_config.h for ppc platforms - -* Thu Dec 15 2005 Tom Lane <tgl@redhat.com> 5.0.16-3 -- my_config.h needs to guard against 64-bit platforms that also define the - 32-bit symbol - -* Wed Dec 14 2005 Tom Lane <tgl@redhat.com> 5.0.16-2 -- oops, looks like we want uname -i not uname -m - -* Mon Dec 12 2005 Tom Lane <tgl@redhat.com> 5.0.16-1 -- Update to MySQL 5.0.16 -- Add EXCEPTIONS-CLIENT license info to the shipped documentation -- Make my_config.h architecture-independent for multilib installs; - put the original my_config.h into my_config_$ARCH.h -- Add -fwrapv to CFLAGS so that gcc 4.1 doesn't break it - -* Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com> -- rebuilt - -* Mon Nov 14 2005 Tom Lane <tgl@redhat.com> 5.0.15-3 -- Make stop script wait for daemon process to disappear (bz#172426) - -* Wed Nov 9 2005 Tom Lane <tgl@redhat.com> 5.0.15-2 -- Rebuild due to openssl library update. - -* Thu Nov 3 2005 Tom Lane <tgl@redhat.com> 5.0.15-1 -- Update to MySQL 5.0.15 (scratch build for now) - -* Wed Oct 5 2005 Tom Lane <tgl@redhat.com> 4.1.14-1 -- Update to MySQL 4.1.14 - -* Tue Aug 23 2005 Tom Lane <tgl@redhat.com> 4.1.12-3 -- Use politically correct patch name. - -* Tue Jul 12 2005 Tom Lane <tgl@redhat.com> 4.1.12-2 -- Fix buffer overflow newly exposed in isam code; it's the same issue - previously found in myisam, and not very exciting, but I'm tired of - seeing build warnings. - -* Mon Jul 11 2005 Tom Lane <tgl@redhat.com> 4.1.12-1 -- Update to MySQL 4.1.12 (includes a fix for bz#158688, bz#158689) -- Extend mysql-test-ssl.patch to solve rpl_openssl test failure (bz#155850) -- Update mysql-lock-ssl.patch to match the upstream committed version -- Add --with-isam to re-enable the old ISAM table type, per bz#159262 -- Add dependency on openssl-devel per bz#159569 -- Remove manual.txt, as upstream decided not to ship it anymore; - it was redundant with the mysql.info file anyway. - -* Mon May 9 2005 Tom Lane <tgl@redhat.com> 4.1.11-4 -- Include proper locking for OpenSSL in the server, per bz#155850 - -* Mon Apr 25 2005 Tom Lane <tgl@redhat.com> 4.1.11-3 -- Enable openssl tests during build, per bz#155850 -- Might as well turn on --disable-dependency-tracking - -* Fri Apr 8 2005 Tom Lane <tgl@redhat.com> 4.1.11-2 -- Avoid dependency on <asm/atomic.h>, cause it won't build anymore on ia64. - This is probably a cleaner solution for bz#143537, too. - -* Thu Apr 7 2005 Tom Lane <tgl@redhat.com> 4.1.11-1 -- Update to MySQL 4.1.11 to fix bz#152911 as well as other issues -- Move perl-DBI, perl-DBD-MySQL dependencies to server package (bz#154123) -- Override configure thread library test to suppress HAVE_LINUXTHREADS check -- Fix BDB failure on s390x (bz#143537) -- At last we can enable "make test" on all arches - -* Fri Mar 11 2005 Tom Lane <tgl@redhat.com> 4.1.10a-1 -- Update to MySQL 4.1.10a to fix security vulnerabilities (bz#150868, - for CAN-2005-0711, and bz#150871 for CAN-2005-0709, CAN-2005-0710). - -* Sun Mar 6 2005 Tom Lane <tgl@redhat.com> 4.1.10-3 -- Fix package Requires: interdependencies. - -* Sat Mar 5 2005 Tom Lane <tgl@redhat.com> 4.1.10-2 -- Need -fno-strict-aliasing in at least one place, probably more. -- Work around some C spec violations in mysql. - -* Fri Feb 18 2005 Tom Lane <tgl@redhat.com> 4.1.10-1 -- Update to MySQL 4.1.10. - -* Sat Jan 15 2005 Tom Lane <tgl@redhat.com> 4.1.9-1 -- Update to MySQL 4.1.9. - -* Wed Jan 12 2005 Tom Lane <tgl@redhat.com> 4.1.7-10 -- Don't assume /etc/my.cnf will specify pid-file (bz#143724) - -* Wed Jan 12 2005 Tim Waugh <twaugh@redhat.com> 4.1.7-9 -- Rebuilt for new readline. - -* Tue Dec 21 2004 Tom Lane <tgl@redhat.com> 4.1.7-8 -- Run make test on all archs except s390x (which seems to have a bdb issue) - -* Mon Dec 13 2004 Tom Lane <tgl@redhat.com> 4.1.7-7 -- Suppress someone's silly idea that libtool overhead can be skipped - -* Sun Dec 12 2004 Tom Lane <tgl@redhat.com> 4.1.7-6 -- Fix init script to not need a valid username for startup check (bz#142328) -- Fix init script to honor settings appearing in /etc/my.cnf (bz#76051) -- Enable SSL (bz#142032) - -* Thu Dec 2 2004 Tom Lane <tgl@redhat.com> 4.1.7-5 -- Add a restorecon to keep the mysql.log file in the right context (bz#143887) - -* Tue Nov 23 2004 Tom Lane <tgl@redhat.com> 4.1.7-4 -- Turn off old_passwords in default /etc/my.cnf file, for better compatibility - with mysql 3.x clients (per suggestion from Joe Orton). - -* Fri Oct 29 2004 Tom Lane <tgl@redhat.com> 4.1.7-3 -- Handle ldconfig more cleanly (put a file in /etc/ld.so.conf.d/). - -* Thu Oct 28 2004 Tom Lane <tgl@redhat.com> 4.1.7-2 -- rebuild in devel branch - -* Wed Oct 27 2004 Tom Lane <tgl@redhat.com> 4.1.7-1 -- Update to MySQL 4.1.x. - -* Tue Oct 12 2004 Tom Lane <tgl@redhat.com> 3.23.58-13 -- fix security issues CAN-2004-0835, CAN-2004-0836, CAN-2004-0837 - (bugs #135372, 135375, 135387) -- fix privilege escalation on GRANT ALL ON `Foo\_Bar` (CAN-2004-0957) - -* Wed Oct 06 2004 Tom Lane <tgl@redhat.com> 3.23.58-12 -- fix multilib problem with mysqlbug and mysql_config -- adjust chkconfig priority per bug #128852 -- remove bogus quoting per bug #129409 (MySQL 4.0 has done likewise) -- add sleep to mysql.init restart(); may or may not fix bug #133993 - -* Tue Oct 05 2004 Tom Lane <tgl@redhat.com> 3.23.58-11 -- fix low-priority security issues CAN-2004-0388, CAN-2004-0381, CAN-2004-0457 - (bugs #119442, 125991, 130347, 130348) -- fix bug with dropping databases under recent kernels (bug #124352) - -* Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com> 3.23.58-10 -- rebuilt - -* Sat Apr 17 2004 Warren Togami <wtogami@redhat.com> 3.23.58-9 -- remove redundant INSTALL-SOURCE, manual.* -- compress manual.txt.bz2 -- BR time - -* Tue Mar 16 2004 Tom Lane <tgl@redhat.com> 3.23.58-8 -- repair logfile attributes in %%files, per bug #102190 -- repair quoting problem in mysqlhotcopy, per bug #112693 -- repair missing flush in mysql_setpermission, per bug #113960 -- repair broken error message printf, per bug #115165 -- delete mysql user during uninstall, per bug #117017 -- rebuilt - -* Tue Mar 02 2004 Elliot Lee <sopwith@redhat.com> -- rebuilt - -* Tue Feb 24 2004 Tom Lane <tgl@redhat.com> -- fix chown syntax in mysql.init -- rebuild - -* Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com> -- rebuilt - -* Tue Nov 18 2003 Kim Ho <kho@redhat.com> 3.23.58-5 -- update mysql.init to use anonymous user (UNKNOWN_MYSQL_USER) for - pinging mysql server (#108779) - -* Mon Oct 27 2003 Kim Ho <kho@redhat.com> 3.23.58-4 -- update mysql.init to wait (max 10 seconds) for mysql server to - start (#58732) - -* Mon Oct 27 2003 Patrick Macdonald <patrickm@redhat.com> 3.23.58-3 -- re-enable Berkeley DB support (#106832) -- re-enable ia64 testing - -* Fri Sep 19 2003 Patrick Macdonald <patrickm@redhat.com> 3.23.58-2 -- rebuilt - -* Mon Sep 15 2003 Patrick Macdonald <patrickm@redhat.com> 3.23.58-1 -- upgrade to 3.23.58 for security fix - -* Tue Aug 26 2003 Patrick Macdonald <patrickm@redhat.com> 3.23.57-2 -- rebuilt - -* Wed Jul 02 2003 Patrick Macdonald <patrickm@redhat.com> 3.23.57-1 -- revert to prior version of MySQL due to license incompatibilities - with packages that link against the client. The MySQL folks are - looking into the issue. - -* Wed Jun 18 2003 Patrick Macdonald <patrickm@redhat.com> 4.0.13-4 -- restrict test on ia64 (temporary) - -* Wed Jun 04 2003 Elliot Lee <sopwith@redhat.com> 4.0.13-3 -- rebuilt - -* Thu May 29 2003 Patrick Macdonald <patrickm@redhat.com> 4.0.13-2 -- fix filter-requires-mysql.sh with less restrictive for mysql-bench - -* Wed May 28 2003 Patrick Macdonald <patrickm@redhat.com> 4.0.13-1 -- update for MySQL 4.0 -- back-level shared libraries available in mysqlclient10 package - -* Fri May 09 2003 Patrick Macdonald <patrickm@redhat.com> 3.23.56-2 -- add sql-bench package (#90110) - -* Wed Mar 19 2003 Patrick Macdonald <patrickm@redhat.com> 3.23.56-1 -- upgrade to 3.23.56 for security fixes -- remove patch for double-free (included in 3.23.56) - -* Tue Feb 18 2003 Patrick Macdonald <patrickm@redhat.com> 3.23.54a-11 -- enable thread safe client -- add patch for double free fix - -* Wed Jan 22 2003 Tim Powers <timp@redhat.com> -- rebuilt - -* Mon Jan 13 2003 Karsten Hopp <karsten@redhat.de> 3.23.54a-9 -- disable checks on s390x - -* Sat Jan 4 2003 Jeff Johnson <jbj@redhat.com> 3.23.54a-8 -- use internal dep generator. - -* Wed Jan 1 2003 Bill Nottingham <notting@redhat.com> 3.23.54a-7 -- fix mysql_config on hammer - -* Sun Dec 22 2002 Tim Powers <timp@redhat.com> 3.23.54a-6 -- don't use rpms internal dep generator - -* Tue Dec 17 2002 Elliot Lee <sopwith@redhat.com> 3.23.54a-5 -- Push it into the build system - -* Mon Dec 16 2002 Joe Orton <jorton@redhat.com> 3.23.54a-4 -- upgrade to 3.23.54a for safe_mysqld fix - -* Thu Dec 12 2002 Joe Orton <jorton@redhat.com> 3.23.54-3 -- upgrade to 3.23.54 for latest security fixes - -* Tue Nov 19 2002 Jakub Jelinek <jakub@redhat.com> 3.23.52-5 -- Always include <errno.h> for errno -- Remove unpackaged files - -* Tue Nov 12 2002 Florian La Roche <Florian.LaRoche@redhat.de> -- do not prereq userdel, not used at all - -* Mon Sep 9 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.52-4 -- Use %%{_libdir} -- Add patch for x86-64 - -* Wed Sep 4 2002 Jakub Jelinek <jakub@redhat.com> 3.23.52-3 -- rebuilt with gcc-3.2-7 - -* Thu Aug 29 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.52-2 -- Add --enable-local-infile to configure - a new option - which doesn't default to the old behaviour (#72885) - -* Fri Aug 23 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.52-1 -- 3.23.52. Fixes a minor security problem, various bugfixes. - -* Sat Aug 10 2002 Elliot Lee <sopwith@redhat.com> 3.23.51-5 -- rebuilt with gcc-3.2 (we hope) - -* Mon Jul 22 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.51-4 -- rebuild - -* Thu Jul 18 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.51-3 -- Fix #63543 and #63542 - -* Thu Jul 11 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.51-2 -- Turn off bdb on PPC(#68591) -- Turn off the assembly optimizations, for safety. - -* Wed Jun 26 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.51-1 -- Work around annoying auto* thinking this is a crosscompile -- 3.23.51 - -* Fri Jun 21 2002 Tim Powers <timp@redhat.com> -- automated rebuild - -* Mon Jun 10 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.50-2 -- Add dependency on perl-DBI and perl-DBD-MySQL (#66349) - -* Thu May 30 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.50-1 -- 3.23.50 - -* Thu May 23 2002 Tim Powers <timp@redhat.com> -- automated rebuild - -* Mon May 13 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.49-4 -- Rebuild -- Don't set CXX to gcc, it doesn't work anymore -- Exclude Alpha - -* Mon Apr 8 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.49-3 -- Add the various .cnf examples as doc files to mysql-server (#60349) -- Don't include manual.ps, it's just 200 bytes with a URL inside (#60349) -- Don't include random files in /usr/share/mysql (#60349) -- langify (#60349) - -* Thu Feb 21 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.49-2 -- Rebuild - -* Sun Feb 17 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.49-1 -- 3.23.49 - -* Thu Feb 14 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.48-2 -- work around perl dependency bug. - -* Mon Feb 11 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.48-1 -- 3.23.48 - -* Thu Jan 17 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.47-4 -- Use kill, not mysqladmin, to flush logs and shut down. Thus, - an admin password can be set with no problems. -- Remove reload from init script - -* Wed Jan 16 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.47-3 -- remove db3-devel from buildrequires, - MySQL has had its own bundled copy since the mid thirties - -* Sun Jan 6 2002 Trond Eivind Glomsrd <teg@redhat.com> 3.23.47-1 -- 3.23.47 -- Don't build for alpha, toolchain immature. - -* Mon Dec 3 2001 Trond Eivind Glomsrd <teg@redhat.com> 3.23.46-1 -- 3.23.46 -- use -fno-rtti and -fno-exceptions, and set CXX to increase stability. - Recommended by mysql developers. - -* Sun Nov 25 2001 Trond Eivind Glomsrd <teg@redhat.com> 3.23.45-1 -- 3.23.45 - -* Wed Nov 14 2001 Trond Eivind Glomsrd <teg@redhat.com> 3.23.44-2 -- centralize definition of datadir in the initscript (#55873) - -* Fri Nov 2 2001 Trond Eivind Glomsrd <teg@redhat.com> 3.23.44-1 -- 3.23.44 - -* Thu Oct 4 2001 Trond Eivind Glomsrd <teg@redhat.com> 3.23.43-1 -- 3.23.43 - -* Mon Sep 10 2001 Trond Eivind Glomsrd <teg@redhat.com> 3.23.42-1 -- 3.23.42 -- reenable innodb - -* Tue Aug 14 2001 Trond Eivind Glomsrd <teg@redhat.com> 3.23.41-1 -- 3.23.41 bugfix release -- disable innodb, to avoid the broken updates -- Use "mysqladmin flush_logs" instead of kill -HUP in logrotate - script (#51711) - -* Sat Jul 21 2001 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.40, bugfix release -- Add zlib-devel to buildrequires: - -* Fri Jul 20 2001 Trond Eivind Glomsrd <teg@redhat.com> -- BuildRequires-tweaking - -* Thu Jun 28 2001 Trond Eivind Glomsrd <teg@redhat.com> -- Reenable test, but don't run them for s390, s390x or ia64 -- Make /etc/my.cnf config(noplace). Same for /etc/logrotate.d/mysqld - -* Thu Jun 14 2001 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.29 -- enable innodb -- enable assembly again -- disable tests for now... - -* Tue May 15 2001 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.38 -- Don't use BDB on Alpha - no fast mutexes - -* Tue Apr 24 2001 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.37 -- Add _GNU_SOURCE to the compile flags - -* Wed Mar 28 2001 Trond Eivind Glomsrd <teg@redhat.com> -- Make it obsolete our 6.2 PowerTools packages -- 3.23.36 bugfix release - fixes some security issues - which didn't apply to our standard configuration -- Make "make test" part of the build process, except on IA64 - (it fails there) - -* Tue Mar 20 2001 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.35 bugfix release -- Don't delete the mysql user on uninstall - -* Tue Mar 13 2001 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.34a bugfix release - -* Wed Feb 7 2001 Trond Eivind Glomsrd <teg@redhat.com> -- added readline-devel to BuildRequires: - -* Tue Feb 6 2001 Trond Eivind Glomsrd <teg@redhat.com> -- small i18n-fixes to initscript (action needs $) - -* Tue Jan 30 2001 Trond Eivind Glomsrd <teg@redhat.com> -- make it shut down and rotate logs without using mysqladmin - (from #24909) - -* Mon Jan 29 2001 Trond Eivind Glomsrd <teg@redhat.com> -- conflict with "MySQL" - -* Tue Jan 23 2001 Trond Eivind Glomsrd <teg@redhat.com> -- improve gettextizing - -* Mon Jan 22 2001 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.32 -- fix logrotate script (#24589) - -* Wed Jan 17 2001 Trond Eivind Glomsrd <teg@redhat.com> -- gettextize -- move the items in Requires(post): to Requires: in preparation - for an errata for 7.0 when 3.23.31 is released -- 3.23.31 - -* Tue Jan 16 2001 Trond Eivind Glomsrd <teg@redhat.com> -- add the log file to the rpm database, and make it 0640 - (#24116) -- as above in logrotate script -- changes to the init sequence - put most of the data - in /etc/my.cnf instead of hardcoding in the init script -- use /var/run/mysqld/mysqld.pid instead of - /var/run/mysqld/pid -- use standard safe_mysqld -- shut down cleaner - -* Mon Jan 08 2001 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.30 -- do an explicit chmod on /var/lib/mysql in post, to avoid - any problems with broken permissons. There is a report - of rm not changing this on its own (#22989) - -* Mon Jan 01 2001 Trond Eivind Glomsrd <teg@redhat.com> -- bzipped source -- changed from 85 to 78 in startup, so it starts before - apache (which can use modules requiring mysql) - -* Wed Dec 27 2000 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.29a - -* Tue Dec 19 2000 Trond Eivind Glomsrd <teg@redhat.com> -- add requirement for new libstdc++, build for errata - -* Mon Dec 18 2000 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.29 - -* Mon Nov 27 2000 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.28 (gamma) -- remove old patches, as they are now upstreamed - -* Thu Nov 14 2000 Trond Eivind Glomsrd <teg@redhat.com> -- Add a requirement for a new glibc (#20735) -- build on IA64 - -* Wed Nov 1 2000 Trond Eivind Glomsrd <teg@redhat.com> -- disable more assembly - -* Wed Nov 1 2000 Jakub Jelinek <jakub@redhat.com> -- fix mysql on SPARC (#20124) - -* Tue Oct 31 2000 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.27 - -* Wed Oct 25 2000 Trond Eivind Glomsrd <teg@redhat.com> -- add patch for fixing bogus aliasing in mysql from Jakub, - which should fix #18905 and #18620 - -* Mon Oct 23 2000 Trond Eivind Glomsrd <teg@redhat.com> -- check for negative niceness values, and negate it - if present (#17899) -- redefine optflags on IA32 FTTB - -* Wed Oct 18 2000 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.26, which among other fixes now uses mkstemp() - instead of tempnam(). -- revert changes made yesterday, the problem is now - isolated - -* Tue Oct 17 2000 Trond Eivind Glomsrd <teg@redhat.com> -- use the compat C++ compiler FTTB. Argh. -- add requirement of ncurses4 (see above) - -* Sun Oct 01 2000 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.25 -- fix shutdown problem (#17956) - -* Tue Sep 26 2000 Trond Eivind Glomsrd <teg@redhat.com> -- Don't try to include no-longer-existing PUBLIC file - as doc (#17532) - -* Thu Sep 12 2000 Trond Eivind Glomsrd <teg@redhat.com> -- rename config file to /etc/my.cnf, which is what - mysqld wants... doh. (#17432) -- include a changed safe_mysqld, so the pid file option - works. -- make mysql dir world readable to they can access the - mysql socket. (#17432) -- 3.23.24 - -* Wed Sep 06 2000 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.23 - -* Sun Aug 27 2000 Trond Eivind Glomsrd <teg@redhat.com> -- Add "|| :" to condrestart to avoid non-zero exit code - -* Thu Aug 24 2000 Trond Eivind Glomsrd <teg@redhat.com> -- it's mysql.com, not mysql.org and use correct path to - source (#16830) - -* Wed Aug 16 2000 Trond Eivind Glomsrd <teg@redhat.com> -- source file from /etc/rc.d, not /etc/rd.d. Doh. - -* Sun Aug 13 2000 Trond Eivind Glomsrd <teg@redhat.com> -- don't run ldconfig -n, it doesn't update ld.so.cache - (#16034) -- include some missing binaries -- use safe_mysqld to start the server (request from - mysql developers) - -* Sat Aug 05 2000 Bill Nottingham <notting@redhat.com> -- condrestart fixes - -* Mon Aug 01 2000 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.22. Disable the old patches, they're now in. - -* Thu Jul 27 2000 Trond Eivind Glomsrd <teg@redhat.com> -- bugfixes in the initscript -- move the .so link to the devel package - -* Wed Jul 19 2000 Trond Eivind Glomsrd <teg@redhat.com> -- rebuild due to glibc changes - -* Tue Jul 18 2000 Trond Eivind Glomsrd <teg@redhat.com> -- disable compiler patch -- don't include info directory file - -* Mon Jul 17 2000 Trond Eivind Glomsrd <teg@redhat.com> -- move back to /etc/rc.d/init.d - -* Fri Jul 14 2000 Trond Eivind Glomsrd <teg@redhat.com> -- more cleanups in initscript - -* Thu Jul 13 2000 Trond Eivind Glomsrd <teg@redhat.com> -- add a patch to work around compiler bug - (from monty@mysql.com) - -* Wed Jul 12 2000 Trond Eivind Glomsrd <teg@redhat.com> -- don't build the SQL daemon statically (glibc problems) -- fix the logrotate script - only flush log if mysql - is running -- change the reloading procedure -- remove icon - glint is obsolete a long time ago - -* Wed Jul 12 2000 Prospector <bugzilla@redhat.com> -- automatic rebuild - -* Mon Jul 10 2000 Trond Eivind Glomsrd <teg@redhat.com> -- try the new compiler again -- build the SQL daemon statically -- add compile time support for complex charsets -- enable assembler -- more cleanups in initscript - -* Sun Jul 09 2000 Trond Eivind Glomsrd <teg@redhat.com> -- use old C++ compiler -- Exclusivearch x86 - -* Sat Jul 08 2000 Trond Eivind Glomsrd <teg@redhat.com> -- move .so files to devel package -- more cleanups -- exclude sparc for now - -* Wed Jul 05 2000 Trond Eivind Glomsrd <teg@redhat.com> -- 3.23.21 -- remove file from /etc/sysconfig -- Fix initscript a bit - initialization of databases doesn't - work yet -- specify the correct licenses -- include a /etc/my.conf (empty, FTTB) -- add conditional restart to spec file - -* Tue Jul 2 2000 Jakub Jelinek <jakub@redhat.com> -- Rebuild with new C++ - -* Fri Jun 30 2000 Trond Eivind Glomsrd <teg@redhat.com> -- update to 3.23.20 -- use %%configure, %%makeinstall, %%{_tmppath}, %%{_mandir}, - %%{_infodir}, /etc/init.d -- remove the bench package -- change some of the descriptions a little bit -- fix the init script -- some compile fixes -- specify mysql user -- use mysql uid 27 (postgresql is 26) -- don't build on ia64 - -* Sat Feb 26 2000 Jos Vos <jos@xos.nl> -- Version 3.22.32 release XOS.1 for LinuX/OS 1.8.0 -- Upgrade from version 3.22.27 to 3.22.32. -- Do "make install" instead of "make install-strip", because "install -s" - now appears to fail on various scripts. Afterwards, strip manually. -- Reorganize subpackages, according to common Red Hat packages: the client - program and shared library become the base package and the server and - some accompanying files are now in a separate server package. The - server package implicitly requires the base package (shared library), - but we have added a manual require tag anyway (because of the shared - config file, and more). -- Rename the mysql-benchmark subpackage to mysql-bench. - -* Mon Jan 31 2000 Jos Vos <jos@xos.nl> -- Version 3.22.27 release XOS.2 for LinuX/OS 1.7.1 -- Add post(un)install scripts for updating ld.so.conf (client subpackage). - -* Sun Nov 21 1999 Jos Vos <jos@xos.nl> -- Version 3.22.27 release XOS.1 for LinuX/OS 1.7.0 -- Initial version. -- Some ideas borrowed from Red Hat Powertools 6.1, although this spec - file is a full rewrite from scratch. |