diff options
Diffstat (limited to 'pcre/RunTest')
| -rwxr-xr-x | pcre/RunTest | 1063 |
1 files changed, 1063 insertions, 0 deletions
diff --git a/pcre/RunTest b/pcre/RunTest new file mode 100755 index 00000000000..505a0bf14b5 --- /dev/null +++ b/pcre/RunTest @@ -0,0 +1,1063 @@ +#! /bin/sh + +############################################################################### +# Run the PCRE tests using the pcretest program. The appropriate tests are +# selected, depending on which build-time options were used. +# +# All tests are now run both with and without -s, to ensure that everything is +# tested with and without studying. However, there are some tests that produce +# different output after studying, typically when we are tracing the actual +# matching process (for example, using auto-callouts). In these few cases, the +# tests are duplicated in the files, one with /S to force studying always, and +# one with /SS to force *not* studying always. The use of -s doesn't then make +# any difference to their output. There is also one test which compiles invalid +# UTF-8 with the UTF-8 check turned off; for this, studying must also be +# disabled with /SS. +# +# When JIT support is available, all the tests are also run with -s+ to test +# (again, almost) everything with studying and the JIT option, unless "nojit" +# is given on the command line. There are also two tests for JIT-specific +# features, one to be run when JIT support is available (unless "nojit" is +# specified), and one when it is not. +# +# Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also +# possible to select which to test by giving "-8", "-16" or "-32" on the +# command line. +# +# As well as "nojit", "-8", "-16", and "-32", arguments for this script are +# individual test numbers, ranges of tests such as 3-6 or 3- (meaning 3 to the +# end), or a number preceded by ~ to exclude a test. For example, "3-15 ~10" +# runs tests 3 to 15, excluding test 10, and just "~10" runs all the tests +# except test 10. Whatever order the arguments are in, the tests are always run +# in numerical order. + +# Other arguments can be one of the words "valgrind", "valgrind-log", or "sim" +# followed by an argument to run cross- compiled executables under a simulator, +# for example: +# +# RunTest 3 sim "qemu-arm -s 8388608" +# +# There are two special cases where only one argument is allowed: +# +# If the first and only argument is "ebcdic", the script runs the special +# EBCDIC test that can be useful for checking certain EBCDIC features, even +# when run in an ASCII environment. +# +# If the script is obeyed as "RunTest list", a list of available tests is +# output, but none of them are run. +############################################################################### + +# Define test titles in variables so that they can be output as a list. Some +# of them are modified (e.g. with -8 or -16) when used in the actual tests. + +title1="Test 1: Main functionality (Compatible with Perl >= 5.10)" +title2="Test 2: API, errors, internals, and non-Perl stuff" +title3="Test 3: Locale-specific features" +title4A="Test 4: UTF" +title4B=" support (Compatible with Perl >= 5.10)" +title5="Test 5: API, internals, and non-Perl stuff for UTF" +title6="Test 6: Unicode property support (Compatible with Perl >= 5.10)" +title7="Test 7: API, internals, and non-Perl stuff for Unicode property support" +title8="Test 8: DFA matching main functionality" +title9="Test 9: DFA matching with UTF" +title10="Test 10: DFA matching with Unicode properties" +title11="Test 11: Internal offsets and code size tests" +title12="Test 12: JIT-specific features (JIT available)" +title13="Test 13: JIT-specific features (JIT not available)" +title14="Test 14: Specials for the basic 8-bit library" +title15="Test 15: Specials for the 8-bit library with UTF-8 support" +title16="Test 16: Specials for the 8-bit library with Unicode propery support" +title17="Test 17: Specials for the basic 16/32-bit library" +title18="Test 18: Specials for the 16/32-bit library with UTF-16/32 support" +title19="Test 19: Specials for the 16/32-bit library with Unicode property support" +title20="Test 20: DFA specials for the basic 16/32-bit library" +title21="Test 21: Reloads for the basic 16/32-bit library" +title22="Test 22: Reloads for the 16/32-bit library with UTF-16/32 support" +title23="Test 23: Specials for the 16-bit library" +title24="Test 24: Specials for the 16-bit library with UTF-16 support" +title25="Test 25: Specials for the 32-bit library" +title26="Test 26: Specials for the 32-bit library with UTF-32 support" + +maxtest=26 + +if [ $# -eq 1 -a "$1" = "list" ]; then + echo $title1 + echo $title2 "(not UTF)" + echo $title3 + echo $title4A $title4B + echo $title5 support + echo $title6 + echo $title7 + echo $title8 + echo $title9 + echo $title10 + echo $title11 + echo $title12 + echo $title13 + echo $title14 + echo $title15 + echo $title16 + echo $title17 + echo $title18 + echo $title19 + echo $title20 + echo $title21 + echo $title22 + echo $title23 + echo $title24 + echo $title25 + echo $title26 + exit 0 +fi + +# Set up a suitable "diff" command for comparison. Some systems +# have a diff that lacks a -u option. Try to deal with this. + +cf="diff" +diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u" + +# Find the test data + +if [ -n "$srcdir" -a -d "$srcdir" ] ; then + testdata="$srcdir/testdata" +elif [ -d "./testdata" ] ; then + testdata=./testdata +elif [ -d "../testdata" ] ; then + testdata=../testdata +else + echo "Cannot find the testdata directory" + exit 1 +fi + + +# ------ Special EBCDIC Test ------- + +if [ $# -eq 1 -a "$1" = "ebcdic" ]; then + ./pcretest -C ebcdic >/dev/null + ebcdic=$? + if [ $ebcdic -ne 1 ] ; then + echo "Cannot run EBCDIC tests: EBCDIC support not compiled" + exit 1 + fi + + for opt in "" "-s" "-dfa" "-s -dfa"; do + ./pcretest -q $opt $testdata/testinputEBC >testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutputEBC testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-dfa" ] ; then echo " OK using DFA" + elif [ "$opt" = "-s -dfa" ] ; then echo " OK using DFA with study" + else echo " OK" + fi + done + +exit 0 +fi + + +# ------ Normal Tests ------ + +# Default values + +arg8= +arg16= +arg32= +nojit= +sim= +skip= +valgrind= + +# This is in case the caller has set aliases (as I do - PH) +unset cp ls mv rm + +# Process options and select which tests to run; for those that are explicitly +# requested, check that the necessary optional facilities are available. + +do1=no +do2=no +do3=no +do4=no +do5=no +do6=no +do7=no +do8=no +do9=no +do10=no +do11=no +do12=no +do13=no +do14=no +do15=no +do16=no +do17=no +do18=no +do19=no +do20=no +do21=no +do22=no +do23=no +do24=no +do25=no +do26=no + +while [ $# -gt 0 ] ; do + case $1 in + 1) do1=yes;; + 2) do2=yes;; + 3) do3=yes;; + 4) do4=yes;; + 5) do5=yes;; + 6) do6=yes;; + 7) do7=yes;; + 8) do8=yes;; + 9) do9=yes;; + 10) do10=yes;; + 11) do11=yes;; + 12) do12=yes;; + 13) do13=yes;; + 14) do14=yes;; + 15) do15=yes;; + 16) do16=yes;; + 17) do17=yes;; + 18) do18=yes;; + 19) do19=yes;; + 20) do20=yes;; + 21) do21=yes;; + 22) do22=yes;; + 23) do23=yes;; + 24) do24=yes;; + 25) do25=yes;; + 26) do26=yes;; + -8) arg8=yes;; + -16) arg16=yes;; + -32) arg32=yes;; + nojit) nojit=yes;; + sim) shift; sim=$1;; + valgrind) valgrind="valgrind --tool=memcheck -q --smc-check=all";; + valgrind-log) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all --log-file=report.%p ";; + ~*) + if expr "$1" : '~[0-9][0-9]*$' >/dev/null; then + skip="$skip `expr "$1" : '~\([0-9]*\)*$'`" + else + echo "Unknown option or test selector '$1'"; exit 1 + fi + ;; + *-*) + if expr "$1" : '[0-9][0-9]*-[0-9]*$' >/dev/null; then + tf=`expr "$1" : '\([0-9]*\)'` + tt=`expr "$1" : '.*-\([0-9]*\)'` + if [ "$tt" = "" ] ; then tt=$maxtest; fi + if expr \( "$tf" "<" 1 \) \| \( "$tt" ">" "$maxtest" \) >/dev/null; then + echo "Invalid test range '$1'"; exit 1 + fi + while expr "$tf" "<=" "$tt" >/dev/null; do + eval do${tf}=yes + tf=`expr $tf + 1` + done + else + echo "Invalid test range '$1'"; exit 1 + fi + ;; + *) echo "Unknown option or test selector '$1'"; exit 1;; + esac + shift +done + +# Find which optional facilities are available. + +$sim ./pcretest -C linksize >/dev/null +link_size=$? +if [ $link_size -lt 2 ] ; then + echo "Failed to find internal link size" + exit 1 +fi +if [ $link_size -gt 4 ] ; then + echo "Failed to find internal link size" + exit 1 +fi + +# All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only +# one need be. + +$sim ./pcretest -C pcre8 >/dev/null +support8=$? +$sim ./pcretest -C pcre16 >/dev/null +support16=$? +$sim ./pcretest -C pcre32 >/dev/null +support32=$? + +# Initialize all bitsizes skipped + +test8=skip +test16=skip +test32=skip + +# If no bitsize arguments, select all that are available + +if [ "$arg8$arg16$arg32" = "" ] ; then + if [ $support8 -ne 0 ] ; then + test8= + fi + if [ $support16 -ne 0 ] ; then + test16=-16 + fi + if [ $support32 -ne 0 ] ; then + test32=-32 + fi + +# Select requested bit sizes + +else + if [ "$arg8" = yes ] ; then + if [ $support8 -eq 0 ] ; then + echo "Cannot run 8-bit library tests: 8-bit library not compiled" + exit 1 + fi + test8= + fi + if [ "$arg16" = yes ] ; then + if [ $support16 -eq 0 ] ; then + echo "Cannot run 16-bit library tests: 16-bit library not compiled" + exit 1 + fi + test16=-16 + fi + if [ "$arg32" = yes ] ; then + if [ $support32 -eq 0 ] ; then + echo "Cannot run 32-bit library tests: 32-bit library not compiled" + exit 1 + fi + test32=-32 + fi +fi + +# UTF support always applies to all bit sizes if both are supported; we can't +# have UTF-8 support without UTF-16 support (for example). + +$sim ./pcretest -C utf >/dev/null +utf=$? + +$sim ./pcretest -C ucp >/dev/null +ucp=$? + +jitopt= +$sim ./pcretest -C jit >/dev/null +jit=$? +if [ $jit -ne 0 -a "$nojit" != "yes" ] ; then + jitopt=-s+ +fi + +# Handle any explicit skips + +for i in $skip; do eval do$i=no; done + +# If any unsuitable tests were explicitly requested, grumble. + +if [ $utf -eq 0 ] ; then + if [ $do4 = yes ] ; then + echo "Can't run test 4 because UTF support is not configured" + exit 1 + fi + if [ $do5 = yes ] ; then + echo "Can't run test 5 because UTF support is not configured" + exit 1 + fi + if [ $do9 = yes ] ; then + echo "Can't run test 8 because UTF support is not configured" + exit 1 + fi + if [ $do15 = yes ] ; then + echo "Can't run test 15 because UTF support is not configured" + exit 1 + fi + if [ $do18 = yes ] ; then + echo "Can't run test 18 because UTF support is not configured" + fi + if [ $do22 = yes ] ; then + echo "Can't run test 22 because UTF support is not configured" + fi +fi + +if [ $ucp -eq 0 ] ; then + if [ $do6 = yes ] ; then + echo "Can't run test 6 because Unicode property support is not configured" + exit 1 + fi + if [ $do7 = yes ] ; then + echo "Can't run test 7 because Unicode property support is not configured" + exit 1 + fi + if [ $do10 = yes ] ; then + echo "Can't run test 10 because Unicode property support is not configured" + exit 1 + fi + if [ $do16 = yes ] ; then + echo "Can't run test 16 because Unicode property support is not configured" + exit 1 + fi + if [ $do19 = yes ] ; then + echo "Can't run test 19 because Unicode property support is not configured" + exit 1 + fi +fi + +if [ $link_size -ne 2 ] ; then + if [ $do11 = yes ] ; then + echo "Can't run test 11 because the link size ($link_size) is not 2" + exit 1 + fi +fi + +if [ $jit -eq 0 ] ; then + if [ $do12 = "yes" ] ; then + echo "Can't run test 12 because JIT support is not configured" + exit 1 + fi +else + if [ $do13 = "yes" ] ; then + echo "Can't run test 13 because JIT support is configured" + exit 1 + fi +fi + +# If no specific tests were requested, select all. Those that are not +# relevant will be automatically skipped. + +if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \ + $do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \ + $do9 = no -a $do10 = no -a $do11 = no -a $do12 = no -a \ + $do13 = no -a $do14 = no -a $do15 = no -a $do16 = no -a \ + $do17 = no -a $do18 = no -a $do19 = no -a $do20 = no -a \ + $do21 = no -a $do22 = no -a $do23 = no -a $do24 = no -a \ + $do25 = no -a $do26 = no ] ; then + do1=yes + do2=yes + do3=yes + do4=yes + do5=yes + do6=yes + do7=yes + do8=yes + do9=yes + do10=yes + do11=yes + do12=yes + do13=yes + do14=yes + do15=yes + do16=yes + do17=yes + do18=yes + do19=yes + do20=yes + do21=yes + do22=yes + do23=yes + do24=yes + do25=yes + do26=yes +fi + +# Handle any explicit skips (again, so that an argument list may consist only +# of explicit skips). + +for i in $skip; do eval do$i=no; done + +# Show which release and which test data + +echo "" +echo PCRE C library tests using test data from $testdata +$sim ./pcretest /dev/null + +for bmode in "$test8" "$test16" "$test32"; do + case "$bmode" in + skip) continue;; + -16) if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi + bits=16; echo "---- Testing 16-bit library ----"; echo "";; + -32) if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi + bits=32; echo "---- Testing 32-bit library ----"; echo "";; + *) bits=8; echo "---- Testing 8-bit library ----"; echo "";; + esac + +# Primary test, compatible with JIT and all versions of Perl >= 5.8 + +if [ $do1 = yes ] ; then + echo $title1 + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput1 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput1 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done +fi + +# PCRE tests that are not JIT or Perl-compatible: API, errors, internals + +if [ $do2 = yes ] ; then + echo $title2 "(not UTF-$bits)" + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput2 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput2 testtry + if [ $? != 0 ] ; then exit 1; fi + else + echo " " + echo "** Test 2 requires a lot of stack. If it has crashed with a" + echo "** segmentation fault, it may be that you do not have enough" + echo "** stack available by default. Please see the 'pcrestack' man" + echo "** page for a discussion of PCRE's stack usage." + echo " " + exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done +fi + +# Locale-specific tests, provided that either the "fr_FR" or the "french" +# locale is available. The former is the Unix-like standard; the latter is +# for Windows. Another possibility is "fr", which needs to be run against +# the Windows-specific input and output files. + +if [ $do3 = yes ] ; then + locale -a | grep '^fr_FR$' >/dev/null + if [ $? -eq 0 ] ; then + locale=fr_FR + infile=$testdata/testinput3 + outfile=$testdata/testoutput3 + else + infile=test3input + outfile=test3output + locale -a | grep '^french$' >/dev/null + if [ $? -eq 0 ] ; then + locale=french + sed 's/fr_FR/french/' $testdata/testinput3 >test3input + sed 's/fr_FR/french/' $testdata/testoutput3 >test3output + else + locale -a | grep '^fr$' >/dev/null + if [ $? -eq 0 ] ; then + locale=fr + sed 's/fr_FR/fr/' $testdata/wintestinput3 >test3input + sed 's/fr_FR/fr/' $testdata/wintestoutput3 >test3output + else + locale= + fi + fi + fi + + if [ "$locale" != "" ] ; then + echo $title3 "(using '$locale' locale)" + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $infile testtry + if [ $? = 0 ] ; then + $cf $outfile testtry + if [ $? != 0 ] ; then + echo " " + echo "Locale test did not run entirely successfully." + echo "This usually means that there is a problem with the locale" + echo "settings rather than a bug in PCRE." + break; + else + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + fi + else exit 1 + fi + done + else + echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr' or" + echo "'french' locales exist, or the \"locale\" command is not available" + echo "to check for them." + echo " " + fi +fi + +# Additional tests for UTF support + +if [ $do4 = yes ] ; then + echo ${title4A}-${bits}${title4B} + if [ $utf -eq 0 ] ; then + echo " Skipped because UTF-$bits support is not available" + else + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput4 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput4 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +if [ $do5 = yes ] ; then + echo ${title5}-${bits} support + if [ $utf -eq 0 ] ; then + echo " Skipped because UTF-$bits support is not available" + else + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput5 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput5 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +if [ $do6 = yes ] ; then + echo $title6 + if [ $utf -eq 0 -o $ucp -eq 0 ] ; then + echo " Skipped because Unicode property support is not available" + else + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput6 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput6 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +# Test non-Perl-compatible Unicode property support + +if [ $do7 = yes ] ; then + echo $title7 + if [ $utf -eq 0 -o $ucp -eq 0 ] ; then + echo " Skipped because Unicode property support is not available" + else + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput7 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput7 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +# Tests for DFA matching support + +if [ $do8 = yes ] ; then + echo $title8 + for opt in "" "-s"; do + $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput8 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput8 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi + done +fi + +if [ $do9 = yes ] ; then + echo ${title9}-${bits} + if [ $utf -eq 0 ] ; then + echo " Skipped because UTF-$bits support is not available" + else + for opt in "" "-s"; do + $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput9 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput9 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi + done + fi +fi + +if [ $do10 = yes ] ; then + echo $title10 + if [ $utf -eq 0 -o $ucp -eq 0 ] ; then + echo " Skipped because Unicode property support is not available" + else + for opt in "" "-s"; do + $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput10 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput10 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi + done + fi +fi + +# Test of internal offsets and code sizes. This test is run only when there +# is Unicode property support and the link size is 2. The actual tests are +# mostly the same as in some of the above, but in this test we inspect some +# offsets and sizes that require a known link size. This is a doublecheck for +# the maintainer, just in case something changes unexpectely. The output from +# this test is not the same in 8-bit and 16-bit modes. + +if [ $do11 = yes ] ; then + echo $title11 + if [ $link_size -ne 2 ] ; then + echo " Skipped because link size is not 2" + elif [ $ucp -eq 0 ] ; then + echo " Skipped because Unicode property support is not available" + else + for opt in "" "-s"; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput11 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput11-$bits testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi + done + fi +fi + +# Test JIT-specific features when JIT is available + +if [ $do12 = yes ] ; then + echo $title12 + if [ $jit -eq 0 -o "$nojit" = "yes" ] ; then + echo " Skipped because JIT is not available or not usable" + else + $sim $valgrind ./pcretest -q $bmode $testdata/testinput12 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput12 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + echo " OK" + fi +fi + +# Test JIT-specific features when JIT is not available + +if [ $do13 = yes ] ; then + echo $title13 + if [ $jit -ne 0 ] ; then + echo " Skipped because JIT is available" + else + $sim $valgrind ./pcretest -q $bmode $testdata/testinput13 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput13 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + echo " OK" + fi +fi + +# Tests for 8-bit-specific features + +if [ "$do14" = yes ] ; then + echo $title14 + if [ "$bits" = "16" -o "$bits" = "32" ] ; then + echo " Skipped when running 16/32-bit tests" + else + cp -f $testdata/saved16 testsaved16 + cp -f $testdata/saved32 testsaved32 + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput14 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput14 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +# Tests for 8-bit-specific features (needs UTF-8 support) + +if [ "$do15" = yes ] ; then + echo $title15 + if [ "$bits" = "16" -o "$bits" = "32" ] ; then + echo " Skipped when running 16/32-bit tests" + elif [ $utf -eq 0 ] ; then + echo " Skipped because UTF-$bits support is not available" + else + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput15 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput15 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +# Tests for 8-bit-specific features (Unicode property support) + +if [ $do16 = yes ] ; then + echo $title16 + if [ "$bits" = "16" -o "$bits" = "32" ] ; then + echo " Skipped when running 16/32-bit tests" + elif [ $ucp -eq 0 ] ; then + echo " Skipped because Unicode property support is not available" + else + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput16 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput16 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +# Tests for 16/32-bit-specific features + +if [ $do17 = yes ] ; then + echo $title17 + if [ "$bits" = "8" ] ; then + echo " Skipped when running 8-bit tests" + else + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput17 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput17 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +# Tests for 16/32-bit-specific features (UTF-16/32 support) + +if [ $do18 = yes ] ; then + echo $title18 + if [ "$bits" = "8" ] ; then + echo " Skipped when running 8-bit tests" + elif [ $utf -eq 0 ] ; then + echo " Skipped because UTF-$bits support is not available" + else + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput18 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput18-$bits testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +# Tests for 16/32-bit-specific features (Unicode property support) + +if [ $do19 = yes ] ; then + echo $title19 + if [ "$bits" = "8" ] ; then + echo " Skipped when running 8-bit tests" + elif [ $ucp -eq 0 ] ; then + echo " Skipped because Unicode property support is not available" + else + for opt in "" "-s" $jitopt; do + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput19 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput19 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" + else echo " OK" + fi + done + fi +fi + +# Tests for 16/32-bit-specific features in DFA non-UTF-16/32 mode + +if [ $do20 = yes ] ; then + echo $title20 + if [ "$bits" = "8" ] ; then + echo " Skipped when running 8-bit tests" + else + for opt in "" "-s"; do + $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput20 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput20 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + if [ "$opt" = "-s" ] ; then echo " OK with study" + else echo " OK" + fi + done + fi +fi + +# Tests for reloads with 16/32-bit library + +if [ $do21 = yes ] ; then + echo $title21 + if [ "$bits" = "8" ] ; then + echo " Skipped when running 8-bit tests" + elif [ $link_size -ne 2 ] ; then + echo " Skipped because link size is not 2" + else + cp -f $testdata/saved8 testsaved8 + cp -f $testdata/saved16LE-1 testsaved16LE-1 + cp -f $testdata/saved16BE-1 testsaved16BE-1 + cp -f $testdata/saved32LE-1 testsaved32LE-1 + cp -f $testdata/saved32BE-1 testsaved32BE-1 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput21 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput21-$bits testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + echo " OK" + fi +fi + +# Tests for reloads with 16/32-bit library (UTF-16 support) + +if [ $do22 = yes ] ; then + echo $title22 + if [ "$bits" = "8" ] ; then + echo " Skipped when running 8-bit tests" + elif [ $utf -eq 0 ] ; then + echo " Skipped because UTF-$bits support is not available" + elif [ $link_size -ne 2 ] ; then + echo " Skipped because link size is not 2" + else + cp -f $testdata/saved16LE-2 testsaved16LE-2 + cp -f $testdata/saved16BE-2 testsaved16BE-2 + cp -f $testdata/saved32LE-2 testsaved32LE-2 + cp -f $testdata/saved32BE-2 testsaved32BE-2 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput22 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput22-$bits testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + echo " OK" + fi +fi + +if [ $do23 = yes ] ; then + echo $title23 + if [ "$bits" = "8" -o "$bits" = "32" ] ; then + echo " Skipped when running 8/32-bit tests" + else + $sim $valgrind ./pcretest -q $bmode $testdata/testinput23 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput23 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + echo " OK" + fi +fi + +if [ $do24 = yes ] ; then + echo $title24 + if [ "$bits" = "8" -o "$bits" = "32" ] ; then + echo " Skipped when running 8/32-bit tests" + elif [ $utf -eq 0 ] ; then + echo " Skipped because UTF-$bits support is not available" + else + $sim $valgrind ./pcretest -q $bmode $testdata/testinput24 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput24 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + echo " OK" + fi +fi + +if [ $do25 = yes ] ; then + echo $title25 + if [ "$bits" = "8" -o "$bits" = "16" ] ; then + echo " Skipped when running 8/16-bit tests" + else + $sim $valgrind ./pcretest -q $bmode $testdata/testinput25 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput25 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + echo " OK" + fi +fi + +if [ $do26 = yes ] ; then + echo $title26 + if [ "$bits" = "8" -o "$bits" = "16" ] ; then + echo " Skipped when running 8/16-bit tests" + elif [ $utf -eq 0 ] ; then + echo " Skipped because UTF-$bits support is not available" + else + $sim $valgrind ./pcretest -q $bmode $testdata/testinput26 testtry + if [ $? = 0 ] ; then + $cf $testdata/testoutput26 testtry + if [ $? != 0 ] ; then exit 1; fi + else exit 1 + fi + echo " OK" + fi +fi + +# End of loop for 8/16/32-bit tests +done + +# Clean up local working files +rm -f test3input test3output testNinput testsaved* teststderr teststdout testtry + +# End |