diff options
Diffstat (limited to 'storage/bdb/test/test001.tcl')
| -rw-r--r-- | storage/bdb/test/test001.tcl | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/storage/bdb/test/test001.tcl b/storage/bdb/test/test001.tcl new file mode 100644 index 00000000000..f0b562bbf24 --- /dev/null +++ b/storage/bdb/test/test001.tcl @@ -0,0 +1,247 @@ +# See the file LICENSE for redistribution information. +# +# Copyright (c) 1996-2002 +# Sleepycat Software. All rights reserved. +# +# $Id: test001.tcl,v 11.28 2002/08/08 15:38:11 bostic Exp $ +# +# TEST test001 +# TEST Small keys/data +# TEST Put/get per key +# TEST Dump file +# TEST Close, reopen +# TEST Dump file +# TEST +# TEST Use the first 10,000 entries from the dictionary. +# TEST Insert each with self as key and data; retrieve each. +# TEST After all are entered, retrieve all; compare output to original. +# TEST Close file, reopen, do retrieve and re-verify. +proc test001 { method {nentries 10000} {start 0} {tnum "01"} {noclean 0} args } { + source ./include.tcl + + set args [convert_args $method $args] + set omethod [convert_method $method] + + # Create the database and open the dictionary + set eindex [lsearch -exact $args "-env"] + # + # If we are using an env, then testfile should just be the db name. + # Otherwise it is the test directory and the name. + # If we are not using an external env, then test setting + # the database cache size and using multiple caches. + set txnenv 0 + if { $eindex == -1 } { + set testfile $testdir/test0$tnum.db + append args " -cachesize {0 1048576 3} " + set env NULL + } else { + set testfile test0$tnum.db + incr eindex + set env [lindex $args $eindex] + set txnenv [is_txnenv $env] + if { $txnenv == 1 } { + append args " -auto_commit " + # + # If we are using txns and running with the + # default, set the default down a bit. + # + if { $nentries == 10000 } { + set nentries 100 + } + } + set testdir [get_home $env] + } + puts "Test0$tnum: $method ($args) $nentries equal key/data pairs" + if { $start != 0 } { + # Sadly enough, we are using start in two different ways. + # In test090, it is used to test really big records numbers + # in queue. In replication, it is used to be able to run + # different iterations of this test using different key/data + # pairs. We try to hide all that magic here. + puts "\tStarting at $start" + + if { $tnum != 90 } { + set did [open $dict] + for { set nlines 0 } { [gets $did str] != -1 } \ + { incr nlines} { + } + close $did + if { $start + $nentries > $nlines } { + set start [expr $nlines - $nentries] + } + } + } + + set t1 $testdir/t1 + set t2 $testdir/t2 + set t3 $testdir/t3 + if { $noclean == 0 } { + cleanup $testdir $env + } + set db [eval {berkdb_open \ + -create -mode 0644} $args $omethod $testfile] + error_check_good dbopen [is_valid_db $db] TRUE + set did [open $dict] + + set pflags "" + set gflags "" + set txn "" + + if { [is_record_based $method] == 1 } { + set checkfunc test001_recno.check + append gflags " -recno" + } else { + set checkfunc test001.check + } + puts "\tTest0$tnum.a: put/get loop" + # Here is the loop where we put and get each key/data pair + set count 0 + if { $start != 0 && $tnum != 90 } { + # Skip over "start" entries + for { set count 0 } { $count < $start } { incr count } { + gets $did str + } + set count 0 + } + while { [gets $did str] != -1 && $count < $nentries } { + if { [is_record_based $method] == 1 } { + global kvals + + set key [expr $count + 1 + $start] + if { 0xffffffff > 0 && $key > 0xffffffff } { + set key [expr $key - 0x100000000] + } + if { $key == 0 || $key - 0xffffffff == 1 } { + incr key + incr count + } + set kvals($key) [pad_data $method $str] + } else { + set key $str + set str [reverse $str] + } + if { $txnenv == 1 } { + set t [$env txn] + error_check_good txn [is_valid_txn $t $env] TRUE + set txn "-txn $t" + } + set ret [eval \ + {$db put} $txn $pflags {$key [chop_data $method $str]}] + error_check_good put $ret 0 + if { $txnenv == 1 } { + error_check_good txn [$t commit] 0 + if { $count % 50 == 0 } { + error_check_good txn_checkpoint($count) \ + [$env txn_checkpoint] 0 + } + } + + set ret [eval {$db get} $gflags {$key}] + error_check_good \ + get $ret [list [list $key [pad_data $method $str]]] + + # Test DB_GET_BOTH for success + set ret [$db get -get_both $key [pad_data $method $str]] + error_check_good \ + getboth $ret [list [list $key [pad_data $method $str]]] + + # Test DB_GET_BOTH for failure + set ret [$db get -get_both $key [pad_data $method BAD$str]] + error_check_good getbothBAD [llength $ret] 0 + + incr count + } + close $did + if { $txnenv == 1 } { + set t [$env txn] + error_check_good txn [is_valid_txn $t $env] TRUE + set txn "-txn $t" + } + # Now we will get each key from the DB and compare the results + # to the original. + puts "\tTest0$tnum.b: dump file" + dump_file $db $txn $t1 $checkfunc + # + # dump_file should just have been "get" calls, so + # aborting a get should really be a no-op. Abort + # just for the fun of it. + if { $txnenv == 1 } { + error_check_good txn [$t abort] 0 + } + error_check_good db_close [$db close] 0 + + # Now compare the keys to see if they match the dictionary (or ints) + if { [is_record_based $method] == 1 } { + set oid [open $t2 w] + # If this is test 90, we're checking wrap and we really + # only added nentries number of items starting at start. + # However, if this isn't 90, then we started at start and + # added an addition nentries number of items. + if { $tnum == 90 } { + for {set i 1} {$i <= $nentries} {incr i} { + set j [expr $i + $start] + if { 0xffffffff > 0 && $j > 0xffffffff } { + set j [expr $j - 0x100000000] + } + if { $j == 0 } { + incr i + incr j + } + puts $oid $j + } + } else { + for { set i 1 } { $i <= $nentries + $start } {incr i} { + puts $oid $i + } + } + close $oid + } else { + set q q + # We assume that when this is used with start != 0, the + # test database accumulates data + filehead [expr $nentries + $start] $dict $t2 + } + filesort $t2 $t3 + file rename -force $t3 $t2 + filesort $t1 $t3 + + error_check_good Test0$tnum:diff($t3,$t2) \ + [filecmp $t3 $t2] 0 + + puts "\tTest0$tnum.c: close, open, and dump file" + # Now, reopen the file and run the last test again. + open_and_dump_file $testfile $env $t1 $checkfunc \ + dump_file_direction "-first" "-next" + if { [string compare $omethod "-recno"] != 0 } { + filesort $t1 $t3 + } + + error_check_good Test0$tnum:diff($t2,$t3) \ + [filecmp $t2 $t3] 0 + + # Now, reopen the file and run the last test again in the + # reverse direction. + puts "\tTest0$tnum.d: close, open, and dump file in reverse direction" + open_and_dump_file $testfile $env $t1 $checkfunc \ + dump_file_direction "-last" "-prev" + + if { [string compare $omethod "-recno"] != 0 } { + filesort $t1 $t3 + } + + error_check_good Test0$tnum:diff($t3,$t2) \ + [filecmp $t3 $t2] 0 +} + +# Check function for test001; keys and data are identical +proc test001.check { key data } { + error_check_good "key/data mismatch" $data [reverse $key] +} + +proc test001_recno.check { key data } { + global dict + global kvals + + error_check_good key"$key"_exists [info exists kvals($key)] 1 + error_check_good "key/data mismatch, key $key" $data $kvals($key) +} |