| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: The test was written before BUG#45827 was fixed.
The test contained code that assumed the wrong behavior,
pre-BUG#45827. Then, the fix for BUG#45827 was merged
from 5.1-rep+2 to 5.1-rep+3. Since the test case assumed
the wrong behavior, it failed. This should have been fixed
by making the test assume the correct behavior, but was
fixed by updating the result file to assert failure.
Fix 1: fix the test to assume correct behavior
(post-BUG#45827), update result file.
Fix 2: make test fail with 'die' instead of 'exit' when
wrong behavior is detected. Thus, the test cannot be
silenced with a wrong result file in case the behavior
will change again.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Replaced 'exit' by 'die' to avoid similar
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Since BUG#45827 is now fixed, we need to update the test case
in two places where it expects the wrong result because of
BUG#45827.
|
| |\ |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Support for flushing individual logs, so that the user can
selectively flush a subset of the server logs.
Flush of individual logs is done according to the
following syntax:
FLUSH <log_category> LOGS;
The syntax is extended so that the user is able to flush a
subset of logs:
FLUSH [log_category LOGS,];
where log_category is one of:
SLOW
ERROR
BINARY
ENGINE
GENERAL
RELAY.
mysql-test/suite/rpl/r/rpl_flush_logs.result:
Test result for WL#5142.
mysql-test/suite/rpl/t/rpl_flush_logs.test:
Added the test file to verify if the 'flush individual log'
statement works fine.
sql/log.cc:
Added the two functions to flush slow and general log.
sql/sql_parse.cc:
Added code to flush specified logs against the option.
sql/sql_yacc.yy:
Added code to parse the 'flush * log' statement syntax and
set its option to Lex->type.
|
| |\ \
| |/ |
|
| |\ \
| |/
| |
| | |
the next step
|
| | |\
| | |
| | |
| | | |
build@mysql.com-20091104182209-iui387z35159aoyw
|
| | | |\ |
|
| | | | | |
|
| | | |\ \
| | | |/
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Bug#41756 "Strange error messages about locks from InnoDB".
In JT_EQ_REF (join_read_key()) access method,
don't try to unlock rows in the handler, unless certain that
a) they were locked
b) they are not used.
Unlocking of rows is done by the logic of the nested join loop,
and is unaware of the possible caching that the access method may
have. This could lead to double unlocking, when a row
was unlocked first after reading into the cache, and then
when taken from cache, as well as to unlocking of rows which
were actually used (but taken from cache).
Delegate part of the unlocking logic to the access method,
and in JT_EQ_REF count how many times a record was actually
used in the join. Unlock it only if it's usage count is 0.
Implemented review comments.
mysql-test/r/innodb_lock_wait_timeout_1.result:
Update results (Bug41756).
mysql-test/t/innodb_lock_wait_timeout_1.test:
Add a test case (Bug#41756).
sql/item_subselect.cc:
Complete struct READ_RECORD initialization with a new
member to unlock records.
sql/records.cc:
Extend READ_RECORD API with a method to unlock read records.
sql/sql_select.cc:
In JT_EQ_REF (join_read_key()) access method,
don't try to unlock rows in the handler, unless certain that
a) they were locked
b) they are not used.
sql/sql_select.h:
Add members to TABLE_REF to count TABLE_REF buffer usage count.
sql/structs.h:
Update declarations.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Bug#41756 "Strange error messages about locks from InnoDB".
In JT_EQ_REF (join_read_key()) access method,
don't try to unlock rows in the handler, unless certain that
a) they were locked
b) they are not used.
Unlocking of rows is done by the logic of the nested join loop,
and is unaware of the possible caching that the access method may
have. This could lead to double unlocking, when a row
was unlocked first after reading into the cache, and then
when taken from cache, as well as to unlocking of rows which
were actually used (but taken from cache).
Delegate part of the unlocking logic to the access method,
and in JT_EQ_REF count how many times a record was actually
used in the join. Unlock it only if it's usage count is 0.
Implemented review comments.
mysql-test/r/bug41756.result:
Add result file (Bug#41756)
mysql-test/t/bug41756-master.opt:
Use --innodb-locks-unsafe-for-binlog, as in 5.0 just
using read_committed isolation is not sufficient to
reproduce the bug.
mysql-test/t/bug41756.test:
Add a test file (Bug#41756)
sql/item_subselect.cc:
Complete struct READ_RECORD initialization with a new
member to unlock records.
sql/records.cc:
Extend READ_RECORD API with a method to unlock read records.
sql/sql_select.cc:
In JT_EQ_REF (join_read_key()) access method,
don't try to unlock rows in the handler, unless certain that
a) they were locked
b) they are not used.
sql/sql_select.h:
Add members to TABLE_REF to count TABLE_REF buffer usage count.
sql/structs.h:
Update declarations.
|
| | | |\ \ |
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
- Remove the conflicting macro definitions since we define a higher value
directly in the cmake files.
|
| | | |\ \ \ |
|
| | | | |\ \ \ |
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
- re-enabled main.innodb_bug44369;
- re-enabled main.innodb_bug47777;
- re-enabled innodb.innodb_information_schema.
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Detailed revision comments:
r6101 | jyang | 2009-10-23 11:45:50 +0300 (Fri, 23 Oct 2009) | 7 lines
branches/zip: Update test result with the WARN_LEVEL_ERROR
to WARN_LEVEL_WARN change. This is the same result as
submitted in rb://172 review, which approved by Sunny Bains
and Marko.
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Detailed revision comments:
r6100 | jyang | 2009-10-22 06:51:07 +0300 (Thu, 22 Oct 2009) | 6 lines
branches/zip: As a request from mysql, WARN_LEVEL_ERROR cannot
be used for push_warning_* call any more. Switch to
WARN_LEVEL_WARN. Bug #47233.
rb://172 approved by Sunny Bains and Marko.
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Detailed revision comments:
r6095 | vasil | 2009-10-19 16:04:59 +0300 (Mon, 19 Oct 2009) | 7 lines
branches/zip:
Fix Bug#47808 innodb_information_schema.test fails when run under valgrind
by using the wait_until_rows_count macro that loops until the number of
rows becomes 14 instead of sleep 0.1, which is obviously very fragile.
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
values return too many records
WHERE clauses with "outer_value_list NOT IN subselect" were
handled incorrectly if the outer value list contained multiple
items where at least one of these could be NULL. The first
outer record with NULL value was handled correctly, but if a
second record with NULL value existed, the optimizer would
choose to reuse the result it got on the last execution of the
subselect. This is incorrect if the outer value list has
multiple items.
The fix is to make Item_in_optimizer::val_int (in
item_cmpfunc.cc) reuse the result of the latest execution
for NULL values only if all values in the outer_value_list
are NULL.
mysql-test/r/subselect3.result:
Added test for BUG#48177
mysql-test/t/subselect3.test:
Added test for BUG#48177
sql/item_cmpfunc.cc:
Make Item_in_optimizer::val_int (in item_cmpfunc.cc) reuse the result of the latest execution for NULL values only if all values in the outer_value_list are NULL.
|
| | | | |\ \ \ \
| | | | | |_|/
| | | | |/| | |
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
When a sessione is closed, all temporary tables of the session are automatically
dropped and are binlogged. But it will be binlogged with wrong database names when
the length of the temporary tables' database names are greater than the
length of the current database name or the current database is not set.
Query_log_event's db_len is forgot to set when Query_log_event's db is set.
This patch wrote code to set db_len immediately after db has set.
|
| | | | | |\ \ \ |
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
when using IF
Bug#45261: Crash, stored procedure + decimal
Revert fix for Bug#45261 due to unforeseen bugs.
|
| | | | |\ \ \ \ \
| | | | | |_|/ /
| | | | |/| | | |
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
- disabled main.innodb_bug47777.test with InnoDB plugin
until fix for plugin is applied.
- disabled main.innodb-autoinc.test (failing)
- re-enabled main.innodb_bug39438.test
- added error message suppression to innodb_bug39438, as
requested by InnoDB/Oracle
- reverted change to main.innodb_bug34300 as plugin specific.
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Detailed revision comments:
r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines
branches/5.1:
Backport c6121 from branches/zip:
------------------------------------------------------------------------
r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines
Changed paths:
M /branches/zip/mysql-test/innodb-autoinc.result
branches/zip: This test has been problematic for sometime now. The underlying
bug is that the data dictionaries get out of sync. In the AUTOINC code we
try and apply salve to the symptoms. In the past MySQL made some unrelated
change and the dictionaries stopped getting out of sync and this test started
to fail. Now, it seems they have reverted that changed and the test is
passing again. I suspect this is not he last time that this test will change.
------------------------------------------------------------------------
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Detailed revision comments:
r6122 | jyang | 2009-10-30 05:18:38 +0200 (Fri, 30 Oct 2009) | 7 lines
branches/5.1: Chnage WARN_LEVEL_ERROR to WARN_LEVEL_WARN
for push_warning_printf() call in innodb.
Fix Bug#47233: Innodb calls push_warning(MYSQL_ERROR::WARN_LEVEL_ERROR)
rb://170 approved by Marko.
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Detailed revision comments:
r6052 | sunny | 2009-10-12 07:09:56 +0300 (Mon, 12 Oct 2009) | 4 lines
branches/5.1: Reset the statement level autoinc counter on ROLLBACK. Fix
the test results too.
rb://164
r6053 | sunny | 2009-10-12 07:37:49 +0300 (Mon, 12 Oct 2009) | 6 lines
branches/5.1: Copy the maximum AUTOINC value from the old table to the new
table when MySQL does a CREATE INDEX ON T. This is required because MySQL
does a table copy, rename and drops the old table.
Fix Bug#47125: auto_increment start value is ignored if an index is created and engine=innodb
rb://168
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Detailed revision comments:
r6051 | sunny | 2009-10-12 07:05:00 +0300 (Mon, 12 Oct 2009) | 6 lines
branches/5.1: Ignore negative values supplied by the user when calculating the
next value to store in dict_table_t. Setting autoincrement columns top negative
values is undefined behavior and this change should bring the behavior of
InnoDB closer to what users expect. Added several tests to check.
rb://162
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Detailed revision comments:
r6045 | jyang | 2009-10-08 02:27:08 +0300 (Thu, 08 Oct 2009) | 7 lines
branches/5.1: Fix bug #47777. Treat the Geometry data same as
Binary BLOB in ha_innobase::store_key_val_for_row(), since the
Geometry data is stored as Binary BLOB in Innodb.
Review: rb://180 approved by Marko Makela.
|
| | | | |\ \ \ \ \ |
|
| | | | | |\ \ \ \ \
| | | | | |/ / / /
| | | | |/| | | | |
|
| | | | | | |\ \ \ \ |
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
binlog, replication aborts
In SBR or MBR, the schema name is not being written to the binlog
when executing a LOAD DATA statement. This becomes a problem when
the current database (lets call it db1) is different from the
table's schema (lets call it db2). For instance, take the
following statements:
use db1;
load data local infile 'infile.txt' into table db2.t
Should this statement be logged without t's schema (db2), when
replaying it, one can get db1.t populated instead of db2.t (if
db1.t exists). On the other hand, if there is no db1.t at all,
replication will stop.
We fix this by always logging the table (in load file) with fully
qualified name when its schema is different from the current
database or when no default database was selected.
|
| | | | | |/ / / / /
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
When a query was using a DATE or DATETIME value formatted
using any other separator characters beside hyphen '-', a
query with a greater-or-equal '>=' condition matching only
the greatest value in an indexed column, the result was
empty if index range scan was employed.
The range optimizer got a new feature between 5.1.38 and
5.1.39 that changes a greater-or-equal condition to a
greater-than if the value matching that in the query was not
present in the table. But the value comparison function
compared the dates as strings instead of dates.
The bug was fixed by splitting the function
get_date_from_str in two: One part that parses and does
error checking. This function is now visible outside the
module. The old get_date_from_str now calls the new
function.
mysql-test/r/range.result:
Bug#47925: Test result
mysql-test/t/range.test:
Bug#47925: Test case
sql/item.cc:
Bug#47925: Fix + some edit on the comments
sql/item.h:
Bug#47925: Changed function signature
sql/item_cmpfunc.cc:
Bug#47925: Split function in two
sql/item_cmpfunc.h:
Bug#47925: Declaration of new function
sql/opt_range.cc:
Bug#47925: Added THD to function call
sql/time.cc:
Bug#47925: Added microsecond comparison
|
| | | | | |\ \ \ \ \ |
|
| | | | | | |\ \ \ \ \
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Conflicts
=========
Text conflict in sql/sql_class.cc
1 conflicts encountered.
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
binlog-db-db / binlog-ignore-db
InnoDB will return an error if statement based replication is used
along with transaction isolation level READ-COMMITTED (or weaker),
even if the statement in question is filtered out according to the
binlog-do-db rules set. In this case, an error should not be printed.
This patch addresses this issue by extending the existing check in
external_lock to take into account the filter rules before deciding to
print an error. Furthermore, it also changes decide_logging_format to
take into consideration whether the statement is filtered out from
binlog before decision is made.
sql/sql_base.cc:
Changed the check on decide_logging_format to take into account
whether statement is filtered or not in SBR.
sql/sql_class.cc:
Added the thd_binlog_filter_ok to INNODB_COMPATIBILITY_HOOKS set.
storage/innobase/handler/ha_innodb.cc:
Extended check in external_lock to take into consideration the
filtering when deciding to throw an error.
storage/innobase/handler/ha_innodb.h:
Added declaration of new hook.
storage/innodb_plugin/handler/ha_innodb.cc:
Extended check in external_lock to take into consideration the
filtering when deciding to throw an error.
storage/innodb_plugin/handler/ha_innodb.h:
Added declaration of new hook.
|
| | | | | | |\ \ \ \ \ \ |
|
| | | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
mysql-test/r/xa.result:
A test case for BUG#43171.
mysql-test/t/xa.test:
A test case for BUG#43171.
sql/handler.cc:
Setting rm_error when we're out of XA transaction has no
special meaning. But it blocks reset of thd->transaction.xid
structure later.
sql/sql_parse.cc:
Reset rm_error before we enter ha_rollback(), so
thd->transaction.xid strucure is reinitialized.
|
| | | | | | |\ \ \ \ \ \ \ |
|
| | | | | | | |\ \ \ \ \ \ \
| | | | | | | | |_|_|_|/ /
| | | | | | | |/| | | | | |
|
| | | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | |
with temporary tables
There were two problems the test case from this bug was
triggering:
1. JOIN::rollup_init() was supposed to wrap all constant Items
into another object for queries with the WITH ROLLUP modifier
to ensure they are never considered as constants and therefore
are written into temporary tables if the optimizer chooses to
employ them for DISTINCT/GROUP BY handling.
However, JOIN::rollup_init() was called before
make_join_statistics(), so Items corresponding to fields in
const tables could not be handled as intended, which was
causing all kinds of problems later in the query execution. In
particular, create_tmp_table() assumed all constant items
except "hidden" ones to be removed earlier by remove_const()
which led to improperly initialized Field objects for the
temporary table being created. This is what was causing crashes
and valgrind errors in storage engines.
2. Even when the above problem had been fixed, the query from
the test case produced incorrect results due to some
DISTINCT/GROUP BY optimizations being performed by the
optimizer that are inapplicable in the WITH ROLLUP case.
Fixed by disabling inapplicable DISTINCT/GROUP BY optimizations
when the WITH ROLLUP modifier is present, and splitting the
const-wrapping part of JOIN::rollup_init() into a separate
method which is now invoked after make_join_statistics() when
the const tables are already known.
mysql-test/r/olap.result:
Added a test case for bug #48131.
mysql-test/t/olap.test:
Added a test case for bug #48131.
sql/sql_select.cc:
1. Disabled inapplicable DISTINCT/GROUP BY optimizations when
the WITH ROLLUP modifier is present.
2. Split the const-wrapping part of JOIN::rollup_init() into a
separate method.
sql/sql_select.h:
Added rollup_process_const_fields() declaration.
|
| | | | | | |\ \ \ \ \ \ \ \
| | | | | | | |_|_|_|_|/ /
| | | | | | |/| | | | | | |
|
| | | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | |
subquery returning multiple rows
Error handling was missing when handling subqueires in WHERE
and when assigning a SELECT result to a @variable.
This caused crash(es).
Fixed by adding error handling code to both the WHERE
condition evaluation and to assignment to an @variable.
|
| | | | | | |\ \ \ \ \ \ \ \
| | | | | | |/ / / / / / / |
|
| | | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | |
having clause...
The fix for bug 46184 was not very complete. It was not covering
views using temporary tables and multiple tables in a FROM clause.
Fixed by reverting the fix for 46184 and making a more general
check that is checking at the right execution stage and for all
of the non-supported cases.
Now PROCEDURE ANALYZE on non-top level SELECT is also forbidden.
Updated the analyse.test and subselect.test accordingly.
|
| | | | | | |\ \ \ \ \ \ \ \
| | | | | | |/ / / / / / / |
|
| | | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | |
Queries with nested outer joins may lead to crashes or
bad results because an internal data structure is not handled
correctly.
The optimizer uses bitmaps of nested JOINs to determine
if certain table can be placed at a certain place in the
JOIN order.
It does maintain a bitmap describing in which JOINs
last placed table is nested.
When it puts a table it makes sure the bit of every JOIN that
contains the table in question is set (because JOINs can be nested).
It does that by recursively setting the bit for the next enclosing
JOIN when this is the first table in the JOIN and recursively
resetting the bit if it's the last table in the JOIN.
When it removes a table from the join order it should do the
opposite : recursively unset the bit if it's the only remaining
table in this join and and recursively set the bit if it's removing
the last table of a JOIN.
There was an error in how the bits was set for the upper levels :
when removing a table it was setting the bit for all the enclosing
nested JOINs even if there were more tables left in the current JOIN
(which practically means that the upper nested JOINs were not affected).
Fixed by stopping the recursion at the relevant level.
mysql-test/r/join.result:
Bug #42116: test case
mysql-test/t/join.test:
Bug #42116: test case
sql/sql_select.cc:
Bug #41116: don't go up and set the bits if more tables in
at the current JOIN level
|
| | | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | |
The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection. Restarting master server can bring two problems as following:
1. The time out error is encountered sporadically. The slave I/O thread tries
to reconnect master ten times, which is set in my.cnf. So in the test
framework sporadically the slave I/O thread really stoped when it can't
reconnect to master in the ten times successfully before the master starts,
then the time out error will be encountered while waiting for the slave to
start.
2. These warnings and errors are produced in server log file when
the slave I/O thread tries to get the values of the UNIX_TIMESTAMP,
SERVER_ID from master under the transient network disconnection.
To fix problem 1, increase the master retry count to sixty times,
so that the slave I/O thread has enough time to reconnect master
successfully.
To fix problem 2, suppress these warnings and errors by mtr suppression,
because they are expected.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock-slave.opt:
Added the *.opt file for increasing master retry count to
sixty times.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Added mtr suppression for suppressing warnings and errors
in server log file.
|
