| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |\ |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Problem: The test was written before BUG#45827 was fixed.
The test contained code that assumed the wrong behavior,
pre-BUG#45827. Then, the fix for BUG#45827 was merged
from 5.1-rep+2 to 5.1-rep+3. Since the test case assumed
the wrong behavior, it failed. This should have been fixed
by making the test assume the correct behavior, but was
fixed by updating the result file to assert failure.
Fix 1: fix the test to assume correct behavior
(post-BUG#45827), update result file.
Fix 2: make test fail with 'die' instead of 'exit' when
wrong behavior is detected. Thus, the test cannot be
silenced with a wrong result file in case the behavior
will change again.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Replaced 'exit' by 'die' to avoid similar
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Since BUG#45827 is now fixed, we need to update the test case
in two places where it expects the wrong result because of
BUG#45827.
|
| | |\ |
|
| | |\ \ |
|
| | |\ \ \
| | |/ /
| | | |
| | | | |
the next step
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
After fix of bug46322, logging to table is turned off, each test
that need this should turn on it in it's opt file.
Add suppression to unsafe statement warnings for binlog_unsafe.test.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
After fix of bug46322, logging to table is turned off, each test that need this should turn on it in it's opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
suppress Unsafe statement warnings
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Create a set of test cases to see if some DDL statements implicitly commit
a transaction on the NDB and are written directly to the binary log without
going through either the Statement- or Transactional-Cache.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
mysql-test/extra/binlog_tests/binlog_failure_mixing_engines.test:
Merged the test case into rpl_mixing_engines.test.
mysql-test/extra/rpl_tests/rpl_mixing_engines.inc:
Incorporated some tests from binlog_failure_mixing_engines.test and
fixed after BUG#47323.
mysql-test/extra/rpl_tests/rpl_mixing_engines.test:
Incorporated some tests from binlog_failure_mixing_engines.test and
fixed after BUG#47323.
mysql-test/suite/binlog/r/binlog_mixed_failure_mixing_engines.result:
Merged the test case into rpl_mixing_engines.test.
mysql-test/suite/binlog/r/binlog_row_failure_mixing_engines.result:
Merged the test case into rpl_mixing_engines.test.
mysql-test/suite/binlog/t/binlog_mixed_failure_mixing_engines.test:
Merged the test case into rpl_mixing_engines.test.
mysql-test/suite/binlog/t/binlog_row_failure_mixing_engines.test:
Merged the test case into rpl_mixing_engines.test.
mysql-test/suite/rpl/r/rpl_mixed_mixing_engines.result:
Incorporated some tests from binlog_failure_mixing_engines.test and
changed after BUG#47323.
mysql-test/suite/rpl/r/rpl_row_mixing_engines.result:
Incorporated some tests from binlog_failure_mixing_engines.test and
changed after BUG#47323.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Incorporated some tests from binlog_failure_mixing_engines.test and
changed after BUG#47323.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
mysql-test/extra/rpl_tests/rpl_implicit_commit_binlog.test:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/r/rpl_mixed_implicit_commit_binlog.result:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/r/rpl_mysql_upgrade.result:
Suppressed warning messages due to unsafe statements.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/r/rpl_stm_implicit_commit_binlog.result:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/t/rpl_mixed_implicit_commit_binlog.test:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/t/rpl_mysql_upgrade.test:
Suppressed warning messages due to unsafe statements.
mysql-test/suite/rpl/t/rpl_row_implicit_commit_binlog.test:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/t/rpl_stm_implicit_commit_binlog.test:
Re-enabled some parts of the test after BUG#46572
|
| | |\ \ \
| | | | |
| | | | |
| | | | | |
rpl_mysql_upgrade fail and are under treatment
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
|
| | |\ \ \ \ |
|
| | | | | | | |
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Post-push fix.
Problem: In a previous patch for BUG#39934, rpl_idempotency.test
was split in two tests. The mtr suppressions in the original test
did not make it into the new test. This caused pushbuild warnings.
Fix: copy the mtr suppressions from rpl_idempotency.test to
rpl_row_idempotency.test
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
updated result file
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
copied the warnings from rpl_idempotency.test to
rpl_row_idempotency.test
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The rpl_ndb/combinations file was introduced as part of the fix.
The file contained an error: ndb suites shall not run with
binlog_format=mixed. Removed that combination.
mysql-test/suite/rpl_ndb/combinations:
removed binlog_format=statement combination since ndb does not
support statement format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_tables.test:
Added have_binlog_format_mixed_or_row.inc.
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
post-push fixes. the test case tried to use a udf that had not been loaded. removed the udf.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
myfunc_int() was supposed to be a udf. but the udf was not loaded.
since the test already uses another plugin, and we don't support
multiple plugin directories, i removed the udf function. it was not
strictly needed.
|
| | |\ \ \ \ \ |
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Post-push fix.
Problem: After the original bugfix, if a statement is unsafe,
binlog_format=mixed, and engine is statement-only, a warning was
generated and the statement executed. However, it is a fundamental
principle of binlogging that binlog_format=mixed should guarantee
correct logging, no compromise. So correct behavior is to generate
an error and don't execute the statement.
Fix: Generate error instead of warning.
Since issue_unsafe_warnings can only generate one error message,
this allows us to simplify the code a bit too:
decide_logging_format does not have to save the error code for
issue_unsafe_warnings
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_ps.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
updated test:
- ER_BINLOG_UNSAFE_AND_STMT_ENGINE is now an error.
- added test for multiple types of unsafety
sql/share/errmsg.txt:
- Reformulated ER_BINLOG_UNSAFE_AND_STMT_ENGINE to reflect that it
is now an error, not a warning.
- Added "Reason for unsafeness" to ER_BINLOG_UNSAFE_STATEMENT and
ER_BINLOG_UNSAFE_AND_STMT_ENGINE.
sql/sql_class.cc:
In decide_logging_format:
- generate an error immediately in case 3, instead of scheduling a
warning to be generated later. also updated comments accordingly
- in case 7, there is only one unsafe warning error code now, so we
don't need to store it in binlog_unsafe_warning_flags
(see changes in sql_lex.h)
- fixed compilation warning in DBUG_PRINT
In issue_binlog_warning:
- moved array of error codes to sql_lex.h (so that they are
accessible also from decide_logging_format)
- simplified code after the first set of bits in
binlog_unsafe_warning_flags was removed
sql/sql_class.h:
- got rid of enum_binlog_stmt_warning. It's not needed anymore
since we only have one type of unsafe warning (one of them
turned into an error)
- updated comments accordingly
sql/sql_lex.cc:
added initialization of the array of error codes that has been
moved from THD::issue_unsafe_warnings to LEX.
sql/sql_lex.h:
Moved array of error codes from THD::issue_unsafe_warnings to LEX.
|
| | | | | | | | |
|
| | |\ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Also renamed current_stmt_binlog_row_based to
current_stmt_binlog_format_row for consistency
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Suppress warnings if binlog_format=STATEMENT and the current
database is filtered out using --binlog-[do|ignore]-db. This
was a regression in my previous patch.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
Added binlog filtering rule.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
Added tests that no error is printed when table is filtered out
by binlog filtering rules.
sql/sql_class.cc:
Don't decide logging format if the statement is filtered out
from the binlog using binlog filtering rules.
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
This is a post-push fix addressing review requests and
problems with extra warnings.
Problem 1: The sub-statement where an unsafe warning was detected was
printed as part of the warning. This was ok for statements that
were unsafe due to, e.g., calls to UUID(), but did not make
sense for statements that were unsafe because there was more than
one autoincrement column (unsafeness in this case comes from the
combination of several sub-statements).
Fix 1: Instead of printing the sub-statement, print an explanation
of why the statement is unsafe.
Problem 2:
When a recursive construct (i.e., stored proceure, stored
function, trigger, view, prepared statement) contained several
sub-statements, and at least one of them was unsafe, there would be
one unsafeness warning per sub-statement - even for safe
sub-statements.
Fix 2:
Ensure that each type of warning is printed at most once, by
remembering throughout the execution of the statement which types
of warnings have been printed.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
- Clarified comment per review request.
- Added checks for the number of warnings in each invocation.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Per review request, replaced @@session.binlog_format by
@@global.binlog_format, since INSERT DELAYED reads the global
variable. (In this test case, the two variables have the same
value, so the change is cosmetic.)
mysql-test/r/sp_trans.result:
updated result file
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_ps.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file. Note that duplicate warnings are now gone.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Added tests for: (1) a statement that is unsafe in many ways;
(2) a statement that is unsafe in the same way several times.
- Use -- style to invoke mysqltest commands.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
updated result file
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Per review request, added comment explaining what the test case
does (copied from rpl_stm_found_rows.test)
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Clarified grammar in comment.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
Updated result file.
sql/item_create.cc:
Made set_stmt_unsafe take one parameter, describing the
type of unsafeness.
sql/sp_head.cc:
Added unsafe_flags field and made it hold all the unsafe flags.
sql/sp_head.h:
- Removed the BINLOG_ROW_BASED_IF_MIXED flag from m_flags.
Instead, we use the new unsafe_flags field to hold the
unsafeness state of the sp.
- Made propagate_attributes() copy all unsafe flags.
sql/sql_base.cc:
- Made LEX::set_stmt_unsafe() take an extra argument.
- Made binlog_unsafe_warning_flags store the type of unsafeness.
- Per review requests, clarified comments
- Added DBUG printouts
sql/sql_class.cc:
- Made warnings be generated in issue_warnings() and call that from
binlog_query(). Wrote issue_warnings(), which prints zero or more
warnings, avoiding to print warnings more than once per statement.
- Per review request, added @todo so that we remember to assert
correct behavior in binlog_query.
sql/sql_class.h:
- Removed BINLOG_WARNING_PRINTED
- Use [set|clear]_current_stmt_binlog_row_based() instead of
modifying the flag directly.
- added issue_unsafe_warnings() (only called from binlog_unsafe)
- Per review request, improved some documentation.
sql/sql_insert.cc:
Added extra argument to LEX::set_stmt_unsafe()
sql/sql_lex.h:
- Added enum_binlog_stmt_unsafe, listing all types of unsafe
statements.
- Per review requests, improved many comments for member
functions.
- Added [get|set]_stmt_unsafe_flags(), which return/set all the
unsafe flags for a statement.
sql/sql_parse.cc:
- Renamed binlog_warning_flags to binlog_unsafe_warning_flags.
- Per review requests, improved comment.
sql/sql_view.cc:
Made views propagate all the new unsafe flags.
sql/sql_yacc.yy:
Added parameter to set_stmt_unsafe().
storage/innobase/handler/ha_innodb.cc:
Per review requests, replaced DBUG_EXECUTE_IF() by DBUG_EVALUATE_IF().
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
with binlog_format = MIXED or ROW.
mysql-test/r/mysqldump.result:
Remove warning from result file.
mysql-test/t/mysqldump.test:
The test gives a warning if binlog_format=STATEMENT due to
BUG#45832. To make the result file not depend on binlog_format,
we disable warnings.
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
mysql-test/r/partition_innodb_stmt.result:
Error message changed.
mysql-test/r/sp_trans.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Error message changed.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Test now uses udf's, so needs to source include/have_udf.inc
mysql-test/suite/parts/r/rpl_partition.result:
updated result file
mysql-test/suite/parts/t/rpl_partition.test:
We no longer allow a slave that has binlog_format=statement
to execute row events. Hence we force the slave to have
binlog_format=row.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
The test uses the example plugin, hence it must
source include/have_example_plugin.inc.
|
| | | |\ \ \ \ \ \
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
|
| |\ \ \ \ \ \ \ \ \
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
build@mysql.com-20091208092611-pbno5awyb0v38hs7
Fixed conflicts in:
- binlog.binlog_unsafe
- rpl.rpl_slow_query_log
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Add the test to disabled list and remove from the experimental list.
|
| | |\ \ \ \ \ \ \ \ \ |
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
and rpl.rpl_get_master_version_and_clock.
|
| | | | | | | | | | | | |
|
| | |/ / / / / / / / / |
|
| | |\ \ \ \ \ \ \ \ \ |
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
SET TRANSACTION ISOLATION LEVEL is used to temporarily set
the trans.iso.level for the next transaction. After the
transaction, the iso.level is (re-)set to value of the
session variable 'tx_isolation'.
The bug is caused by setting the thd->variables.tx_isolation
field to the value of the session variable upon each
statement commit. It should only be set at the end of the
full transaction.
The fix has been to remove the setting of the variable in
ha_autocommit_or_rollback if we're in a transaction, as it
will be correctly set in either ha_rollback or
ha_commit_one_phase.
If, on the other hand, we're in autocommit mode, tx_isolation
will be explicitly set here.
mysql-test/t/innodb_mysql.test:
"SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED" sets
the trans.isolation for the next transaction. We test
that @@tx_isolation keeps this value during the transaction,
and is only reset back to the session value at the end
of the transaction.
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
applied revisions: r6185, r6186, r6189, r6194
r6185 - only code changes incorporated, changesets which change
innodb tests in the main mysql suite are discarded
r61889 - Fixes BUG#48782
Detailed revision comments:
r6185 | marko | 2009-11-17 16:44:20 +0200 (Tue, 17 Nov 2009) | 16 lines
branches/zip: Report duplicate table names
to the client connection, not to the error log. This change will allow
innodb-index.test to be re-enabled. It was previously disabled, because
mysql-test-run does not like output in the error log.
row_create_table_for_mysql(): Do not output anything to the error log
when reporting DB_DUPLICATE_KEY. Let the caller report the error.
Add a TODO comment that the dict_table_t object is apparently not freed
when an error occurs.
create_table_def(): Convert InnoDB table names to the character set
of the client connection for reporting. Use my_error(ER_WRONG_COLUMN_NAME)
for reporting reserved column names. Report my_error(ER_TABLE_EXISTS_ERROR)
when row_create_table_for_mysql() returns DB_DUPLICATE_KEY.
rb://206
r6186 | vasil | 2009-11-17 16:48:14 +0200 (Tue, 17 Nov 2009) | 4 lines
branches/zip:
Add ChangeLog entry for r6185.
r6189 | marko | 2009-11-18 11:36:18 +0200 (Wed, 18 Nov 2009) | 5 lines
branches/zip: ha_innobase::add_index(): When creating the primary key
and the table is being locked by another transaction,
do not attempt to drop the table. (Bug #48782)
Approved by Sunny Bains over IM
r6194 | vasil | 2009-11-19 09:24:45 +0200 (Thu, 19 Nov 2009) | 5 lines
branches/zip:
Increment version number from 1.0.5 to 1.0.6 since 1.0.5 was just released
by MySQL and we will soon release 1.0.6.
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Fixes several test cases.
applied revisions: r6181, r6182, r6183, r6184
r6183 - changes are made only to tests in innodb suite which is only
innodb-consistent-master.opt
Detailed revision comments:
r6181 | vasil | 2009-11-17 12:21:41 +0200 (Tue, 17 Nov 2009) | 33 lines
branches/zip:
At the end of innodb-index.test: restore the environment as it was before
the test was started to silence this warning:
MTR's internal check of the test case 'main.innodb-index' failed.
This means that the test case does not preserve the state that existed
before the test case was executed. Most likely the test case did not
do a proper clean-up.
This is the diff of the states of the servers before and after the
test case was executed:
mysqltest: Logging to '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'.
mysqltest: Results saved in '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'.
mysqltest: Connecting to server localhost:13000 (socket /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ...
mysqltest: ... Connected.
mysqltest: Start processing test commands from './include/check-testcase.test' ...
mysqltest: ... Done processing test commands.
--- /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result 2009-11-17 13:10:40.000000000 +0300
+++ /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject 2009-11-17 13:10:54.000000000 +0300
@@ -84,7 +84,7 @@
INNODB_DOUBLEWRITE ON
INNODB_FAST_SHUTDOWN 1
INNODB_FILE_FORMAT Antelope
-INNODB_FILE_FORMAT_CHECK Antelope
+INNODB_FILE_FORMAT_CHECK Barracuda
INNODB_FILE_PER_TABLE OFF
INNODB_FLUSH_LOG_AT_TRX_COMMIT 1
INNODB_FLUSH_METHOD
mysqltest: Result content mismatch
not ok
r6182 | marko | 2009-11-17 13:49:15 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: Set svn:eol-style on mysql-test files.
r6183 | marko | 2009-11-17 13:51:16 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: Prepend loose_ to plugin-only mysql-test options.
r6184 | marko | 2009-11-17 13:52:01 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: innodb-index.test: Restore innodb_file_format_check.
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
1. add testcase for BUG#46676
2. Allow CREATE INDEX to be interrupted
3. ha_innobase::change_active_index(): When the history is
missing, report it to the client, not to the error log
4. ChangeLog entries
appplied revisions:r6169, r6170, r6175, r6177, r6179
Detailed revision comments:
r6169 | calvin | 2009-11-12 14:40:43 +0200 (Thu, 12 Nov 2009) | 6 lines
branches/zip: add test case for bug#46676
This crash is reproducible with InnoDB plugin 1.0.4 + MySQL 5.1.37.
But no longer reproducible after MySQL 5.1.38 (with plugin 1.0.5).
Add test case to catch future regression.
r6170 | marko | 2009-11-12 15:49:08 +0200 (Thu, 12 Nov 2009) | 4 lines
branches/zip: Allow CREATE INDEX to be interrupted. (Issue #354)
rb://183 approved by Heikki Tuuri
r6175 | vasil | 2009-11-16 20:07:39 +0200 (Mon, 16 Nov 2009) | 4 lines
branches/zip:
Wrap line at 78th char in the ChangeLog
r6177 | calvin | 2009-11-16 20:20:38 +0200 (Mon, 16 Nov 2009) | 2 lines
branches/zip: add an entry to ChangeLog for r6065
r6179 | marko | 2009-11-17 10:19:34 +0200 (Tue, 17 Nov 2009) | 2 lines
branches/zip: ha_innobase::change_active_index(): When the history is
missing, report it to the client, not to the error log.
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
applied revisions: r6157
Detailed revision comments:
r6157 | jyang | 2009-11-11 14:27:09 +0200 (Wed, 11 Nov 2009) | 10 lines
branches/zip: Fix an issue that a local variable defined
in innodb_file_format_check_validate() is being referenced
across function in innodb_file_format_check_update().
In addition, fix "set global innodb_file_format_check =
DEFAULT" call.
Bug #47167: "set global innodb_file_format_check" cannot
set value by User-Defined Variable."
rb://169 approved by Sunny Bains and Marko.
|
| | |/ / / / / / / / /
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Enable partition_innodb_plugin.test for BUG#32430
applied revisions: r6134, r6137, r6153
Detailed revision comments:
r6134 | marko | 2009-11-04 09:57:29 +0200 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
r6137 | marko | 2009-11-04 15:24:28 +0200 (Wed, 04 Nov 2009) | 1 line
branches/zip: dict_index_too_big_for_undo(): Correct a typo.
r6153 | vasil | 2009-11-10 15:33:22 +0200 (Tue, 10 Nov 2009) | 145 lines
branches/zip: Merge r6125:6152 from branches/5.1:
(everything except the last white-space change was skipped as it is already
in branches/zip)
------------------------------------------------------------------------
r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines
Changed paths:
M /branches/5.1/Makefile.am
M /branches/5.1/mysql-test/innodb-autoinc.result
M /branches/5.1/mysql-test/innodb-autoinc.test
branches/5.1:
Backport c6121 from branches/zip:
------------------------------------------------------------------------
r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines
Changed paths:
M /branches/zip/mysql-test/innodb-autoinc.result
branches/zip: This test has been problematic for sometime now. The underlying
bug is that the data dictionaries get out of sync. In the AUTOINC code we
try and apply salve to the symptoms. In the past MySQL made some unrelated
change and the dictionaries stopped getting out of sync and this test started
to fail. Now, it seems they have reverted that changed and the test is
passing again. I suspect this is not he last time that this test will change.
------------------------------------------------------------------------
------------------------------------------------------------------------
r6129 | vasil | 2009-10-30 17:14:22 +0200 (Fri, 30 Oct 2009) | 4 lines
Changed paths:
M /branches/5.1/Makefile.am
branches/5.1:
Revert a change to Makefile.am that sneaked unnoticed in c6127.
------------------------------------------------------------------------
r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/include/ha_prototypes.h
M /branches/5.1/ut/ut0ut.c
branches/5.1: Port r6134 from branches/zip:
------------------------------------------------------------------------
r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
------------------------------------------------------------------------
innobase_print_identifier(): Replace with innobase_convert_name().
innobase_convert_identifier(): New function, called by innobase_convert_name().
------------------------------------------------------------------------
r6149 | vasil | 2009-11-09 11:15:01 +0200 (Mon, 09 Nov 2009) | 5 lines
Changed paths:
M /branches/5.1/CMakeLists.txt
branches/5.1:
Followup to r5700: Adjust the changes so they are the same as in the BZR
repository.
------------------------------------------------------------------------
r6150 | vasil | 2009-11-09 11:43:31 +0200 (Mon, 09 Nov 2009) | 58 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
Merge a part of r2911.5.5 from MySQL:
(the other part of this was merged in c5700)
------------------------------------------------------------
revno: 2911.5.5
committer: Vladislav Vaintroub <vvaintroub@mysql.com>
branch nick: 5.1-innodb_plugin
timestamp: Wed 2009-06-10 10:59:49 +0200
message:
Backport WL#3653 to 5.1 to enable bundled innodb plugin.
Remove custom DLL loader code from innodb plugin code, use
symbols exported from mysqld.
removed:
storage/innodb_plugin/handler/handler0vars.h
storage/innodb_plugin/handler/win_delay_loader.cc
added:
storage/mysql_storage_engine.cmake
win/create_def_file.js
modified:
CMakeLists.txt
include/m_ctype.h
include/my_global.h
include/my_sys.h
include/mysql/plugin.h
libmysqld/CMakeLists.txt
mysql-test/mysql-test-run.pl
mysql-test/t/plugin.test
mysql-test/t/plugin_load-master.opt
mysys/charset.c
sql/CMakeLists.txt
sql/handler.h
sql/mysql_priv.h
sql/mysqld.cc
sql/sql_class.cc
sql/sql_class.h
sql/sql_list.h
sql/sql_profile.h
storage/Makefile.am
storage/archive/CMakeLists.txt
storage/blackhole/CMakeLists.txt
storage/csv/CMakeLists.txt
storage/example/CMakeLists.txt
storage/federated/CMakeLists.txt
storage/heap/CMakeLists.txt
storage/innobase/CMakeLists.txt
storage/innobase/handler/ha_innodb.cc
storage/innodb_plugin/CMakeLists.txt
storage/innodb_plugin/handler/ha_innodb.cc
storage/innodb_plugin/handler/handler0alter.cc
storage/innodb_plugin/handler/i_s.cc
storage/innodb_plugin/plug.in
storage/myisam/CMakeLists.txt
storage/myisammrg/CMakeLists.txt
win/Makefile.am
win/configure.js
------------------------------------------------------------------------
r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
White space fixup.
------------------------------------------------------------------------
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
1. Enabling the disabled test for BUG#32430 for builtin innodb
2. Disabling the innodb-autoinc.test for innodb plugin.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
1. BUG#47720 - REPLACE INTO Autoincrement column with negative values.
Detailed revision comments:
r6235 | sunny | 2009-11-26 01:14:42 +0200 (Thu, 26 Nov 2009) | 9 lines
branches/5.1: Fix Bug#47720 - REPLACE INTO Autoincrement column with negative values.
This bug is similiar to the negative autoinc filter patch from earlier,
with the additional handling of filtering out the negative column values
set explicitly by the user.
rb://184
Approved by Heikki.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
1. BUG#49032 - auto_increment field does not initialize to last value
in InnoDB Storage Engine
2. Fix whitespace issues and fix tests and make read float/double arg const
Detailed revision comments:
r6231 | sunny | 2009-11-25 10:26:27 +0200 (Wed, 25 Nov 2009) | 7 lines
branches/5.1: Fix BUG#49032 - auto_increment field does not initialize to last value in InnoDB Storage Engine.
We use the appropriate function to read the column value for non-integer
autoinc column types, namely float and double.
rb://208. Approved by Marko.
r6232 | sunny | 2009-11-25 10:27:39 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix white space errors.
r6233 | sunny | 2009-11-25 10:28:35 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix tests and make read float/double arg const.
r6234 | sunny | 2009-11-25 10:29:03 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix whitepsace issues.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
1. BUG#48482 - innodb-autoinc.test fails with results difference
2. enable the disabled test
Detailed revision comments:
r6230 | sunny | 2009-11-24 23:52:43 +0200 (Tue, 24 Nov 2009) | 3 lines
branches/5.1: Fix autoinc failing test results.
(this should be skipped when merging 5.1 into zip)
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
to 5.1.39
Fix for failure on windows PB2 because of the result content mismatch.
In windows additional information about TCP port was causing failures.
Added to regex.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
--slave-load-tm
The 'slave_patternload_file' is assigned to the real path of the load data file
when initializing the object of Relay_log_info. But the path of the load data
file is not formatted to real path when executing event from relay log. So the
error will be encountered if the path of the load data file is a symbolic link.
Actually the global 'opt_secure_file_priv' is not formatted to real path when
loading data from file. So the same thing will happen too.
To fix these errors, the path of the load data file should be formatted to
real path when executing event from relay log. And the 'opt_secure_file_priv'
should be formatted to real path when loading data infile.
mysql-test/suite/rpl/r/rpl_loaddata_symlink.result:
Test result for bug#43913.
mysql-test/suite/rpl/t/rpl_loaddata_symlink-master.sh:
Added the test file to create a link from $MYSQLTEST_VARDIR/std_data
to $MYSQLTEST_VARDIR/std_data_master_link
mysql-test/suite/rpl/t/rpl_loaddata_symlink-slave.sh:
Added the test file to create a link from $MYSQLTEST_VARDIR/std_data
to $MYSQLTEST_VARDIR/std_data_slave_link
mysql-test/suite/rpl/t/rpl_loaddata_symlink.test:
Added the test file to verify if loading data infile will work fine
if the path of the load data file is a symbolic link.
sql/rpl_rli.cc:
Added call 'my_realpath' function for avoiding sometimes the 'fn_format'
function can't format real path rightly.
|
| | |\ \ \ \ \ \ \ \ \ |
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
dependent on the case mode
|
| | |\ \ \ \ \ \ \ \ \ \ |
|
| | | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
<tmp_tbl> with RBL
When binlogging the statement, the server always handle the existing
object as a table, even though it is a view. However a view is
handled differently in other parts of the code thus leading the
statement to crash in RBL if the view exists.
This happens because the underlying tables for the view are not opened
when we try to call store_create_info() on the view in order to build
a CREATE TABLE statement.
This patch will only address the crash problem, other binlogging
problems related to CREATE TABLE IF NOT EXISTS LIKE when the existing
object is a view will be solved by BUG 47442.
|
| | |\ \ \ \ \ \ \ \ \ \ \
| | | |/ / / / / / / / /
| | |/| | | | | | | | | |
|
