| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
| |
This solves some possible dead locks when one calls stop slave while slave
is starting.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The reason for this is that stop slave takes LOCK_active_mi over the
whole operation while some slave operations will also need LOCK_active_mi
which causes deadlocks.
Fixed by introducing object counting for Master_info and not taking
LOCK_active_mi over stop slave or even stop_all_slaves()
Another benefit of this approach is that it allows:
- Multiple threads can run SHOW SLAVE STATUS at the same time
- START/STOP/RESET/SLAVE STATUS on a slave will not block other slaves
- Simpler interface for handling get_master_info()
- Added some missing unlock of 'log_lock' in error condtions
- Moved rpl_parallel_inactivate_pool(&global_rpl_thread_pool) to end
of stop_slave() to not have to use LOCK_active_mi inside
terminate_slave_threads()
- Changed argument for remove_master_info() to Master_info, as we always
have this available
- Fixed core dump when doing FLUSH TABLES WITH READ LOCK and parallel
replication. Problem was that waiting for pause_for_ftwrl was not done
when deleting rpt->current_owner after a force_abort.
|
| |\ |
|
| | |\ |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Revert following bug fix:
Bug#20685029: SLAVE IO THREAD SHOULD STOP WHEN DISK IS
FULL
Bug#21753696: MAKE SHOW SLAVE STATUS NON BLOCKING IF IO
THREAD WAITS FOR DISK SPACE
This fix results in a deadlock between slave IO thread
and SQL thread.
(cherry picked from commit e3fea6c6dbb36c6ab21c4ab777224560e9608b53)
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
FULL
Bug#21753696: MAKE SHOW SLAVE STATUS NON BLOCKING IF IO
THREAD WAITS FOR DISK SPACE
Problem:
========
Currently SHOW SLAVE STATUS blocks if IO thread waits for
disk space. This makes automation tools verifying
server health block on taking relevant action. Finally this
will create SHOW SLAVE STATUS piles.
Analysis:
=========
SHOW SLAVE STATUS hangs on mi->data_lock if relay log write
is waiting for free disk space while holding mi->data_lock.
mi->data_lock is needed to protect the format description
event (mi->format_description_event) which is accessed by
the clients running FLUSH LOGS and slave IO thread. Note
relay log writes don't need to be protected by
mi->data_lock, LOCK_log is used to protect relay log between
IO and SQL thread (see MYSQL_BIN_LOG::append_event). The
code takes mi->data_lock to protect
mi->format_description_event during relay log rotate which
might get triggered right after relay log write.
Fix:
====
Release the data_lock just for the duration of writing into
relay log.
Made change to ensure the following lock order is maintained
to avoid deadlocks.
data_lock, LOCK_log
data_lock is held during relay log rotations to protect
the description event.
|
| | | |\ |
|
| | | | |\ |
|
| | | | | | |
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Until-pos guarding did not distiguish the master originated events from ones that the slave
can introduce to the relay log e.g Rotate to the next relay log at slave restarting.
The local Rotate's coordinate are incomparable with the Until-master-pos.
That led to the unexpectable stop this bug describes.
Fixed with to avoid Until-master-pos comparison for a local slave's event.
Notice that if --replicate-same-server is true such event is treated as coming from
the master side.
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The issue of the current bug is unguarded access to mi->slave_running
by the shutdown thread calling end_slave() that is bug#29968
(alas happened not to be cross-linked with the current bug)
Fixed:
with removing the unguarded read of the running status
and perform reading it in terminate_slave_thread()
at time run_lock is taken (mostly bug#29968 backporting, still with some
improvements over that patch - see the error reporting from
terminate_slave_thread()).
Issue of bug#38716 is fixed here for 5.0 branch as well.
Note:
There has been a separate artifact identified -
a race condition between init_slave() and end_slave() -
reported as Bug#44467.
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
log-slave-updates and circul repl
Slave SQL thread may execute one extra event when there are events
skipped by slave I/O thread (e.g. originated by the same server).
Whereas it was requested not to do so by the UNTIL condition.
This happens because we compare with the end position of previously
executed event. This is fine when there are no skipped by slave I/O
thread events, as end position of previous event equals to start
position of to be executed event. Otherwise this position equals to
start position of skipped event.
This is fixed by:
- reading the event to be executed before checking if the until condition
is satisfied.
- comparing the start position of the event to be executed. Since we do
not have the start position available, we compute it by subtracting
event length from end position (which is available).
- if there are no events on the event queue at the slave sql starting
time, that meet until condition, we stop immediately, as in this
case we do not want to wait for next event.
|
| | | |\ \ \
| | | |/ /
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Manual merge from mysql-5.1-bugteam into mysql-5.5-bugteam.
Conflicts
=========
Text conflict in sql/log.cc
Text conflict in sql/log.h
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_priv.h
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
when generating new name.
If find_uniq_filename returns an error, then this error is not
being propagated upwards, and execution does not report error to
the user (although a entry in the error log is generated).
Additionally, some more errors were ignored in new_file_impl:
- when writing the rotate event
- when reopening the index and binary log file
This patch addresses this by propagating the error up in the
execution stack. Furthermore, when rotation of the binary log
fails, an incident event is written, because there may be a
chance that some changes for a given statement, were not properly
logged. For example, in SBR, LOAD DATA INFILE statement requires
more than one event to be logged, should rotation fail while
logging part of the LOAD DATA events, then the logged data would
become inconsistent with the data in the storage engine.
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
|
| | | | | |
| | | | |
| | | | |
| | | | | |
Part V: performance schema implementation
|
| | | | | |
| | | | |
| | | | |
| | | | | |
Part IV: sql instrumentation
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
-------------------------------------------------------------
revno: 2877
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 35164-6.0
timestamp: Wed 2008-10-15 19:53:18 -0300
message:
Bug#35164: Large number of invalid pthread_attr_setschedparam calls
Bug#37536: Thread scheduling causes performance degradation at low thread count
Bug#12702: Long queries take 100% of CPU and freeze other applications under Windows
The problem is that although having threads with different priorities
yields marginal improvements [1] in some platforms [2], relying on some
statically defined priorities (QUERY_PRIOR and WAIT_PRIOR) to play well
(or to work at all) with different scheduling practices and disciplines
is, at best, a shot in the dark as the meaning of priority values may
change depending on the scheduling policy set for the process.
Another problem is that increasing priorities can hurt other concurrent
(running on the same hardware) applications (such as AMP) by causing
starvation problems as MySQL threads will successively preempt lower
priority processes. This can be evidenced by Bug#12702.
The solution is to not change the threads priorities and rely on the
system scheduler to perform its job. This also enables a system admin
to increase or decrease the scheduling priority of the MySQL process,
if intended.
Furthermore, the internal wrappers and code for changing the priority
of threads is being removed as they are now unused and ancient.
1. Due to unintentional side effects. On Solaris this could artificially
help benchmarks as calling the priority changing syscall millions of
times is more beneficial than the actual setting of the priority.
2. Where it actually works. It has never worked on Linux as the default
scheduling policy SCHED_OTHER only accepts the static priority 0.
|
| | | |\ \ \
| | | |/ /
| | |/| |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
|
| | | | |\ \ |
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
NOTE: Backporting the patch to next-mr.
The slave was crashing while failing to execute the init_slave() function.
The issue stems from two different reasons:
1 - A failure while allocating the master info structure generated a
segfault due to a NULL pointer.
2 - A failure while recovering generated a segfault due to a non-initialized
relay log file. In other words, the mi->init and rli->init were both set to true
before executing the recovery process thus creating an inconsistent state as the
relay log file was not initialized.
To circumvent such problems, we refactored the recovery process which is now executed
while initializing the relay log. It is ensured that the master info structure is
created before accessing it and any error is propagated thus avoiding to set mi->init
and rli->init to true when for instance the relay log is not initialized or the relay
info is not flushed.
The changes related to the refactory are described below:
1 - Removed call to init_recovery from init_slave.
2 - Changed the signature of the function init_recovery.
3 - Removed flushes. They are called while initializing the relay log and master
info.
4 - Made sure that if the relay info is not flushed the mi-init and rli-init are not
set to true.
In this patch, we also replaced the exit(1) in the fault injection by DBUG_ABORT()
to make it compliant with the code guidelines.
|
| | | | |/ /
| | | | |
| | | | |
| | | | | |
backporting from 6.0 code base to 5.1.
|
| | | |/ /
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The BINLOG statement was sharing too much code with the slave SQL thread, introduced with
the patch for Bug#32407. This caused statements to be logged with the wrong server_id, the
id stored inside the events of the BINLOG statement rather than the id of the running
server.
Fix by rearranging code a bit so that only relevant parts of the code are executed by
the BINLOG statement, and the server_id of the server executing the statements will
not be overrided by the server_id stored in the 'format description BINLOG statement'.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
lock wait
timeout
In STMT and MIXED modes, a statement that changes both non-transactional and
transactional tables must be written to the binary log whenever there are
changes to non-transactional tables. This means that the statement gets into the
binary log even when the changes to the transactional tables fail. In particular
, in the presence of a failure such statement is annotated with the error number
and wrapped in a begin/rollback. On the slave, while applying the statement, it
is expected the same failure and the rollback prevents the transactional changes
to be persisted.
Unfortunately, statements that fail due to concurrency issues (e.g. deadlocks,
timeouts) are logged in the same way causing the slave to stop as the statements
are applied sequentially by the SQL Thread. To fix this bug, we automatically
ignore concurrency failures on the slave. Specifically, the following failures
are ignored: ER_LOCK_WAIT_TIMEOUT, ER_LOCK_DEADLOCK and ER_XA_RBDEADLOCK.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The reason for the crash was rotate_relay_log (mi=0x0) did not verify
the passed value of active_mi. There are more cases where active_mi
is supposed to be non-zero e.g change_master(), stop_slave(), and it's
reasonable to protect from a similar crash all of them with common
fixes.
Fixed with spliting end_slave() in slave threads release and slave
data clean-up parts (a new close_active_mi()). The new function is
invoked at the very end of close_connections() so that all users of
active_mi are proven to have left.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Several system variables did not behave like system variables should do.
When trying to SET them or use them in SELECT, they were reported as
"unknown system variable". But they appeared in SHOW VARIABLES.
This has been fixed by removing the "fixed_vars" array of variables
and integrating the variables into the normal system variables chain.
All of these variables do now behave as read-only global-only
variables. Trying to SET them tells they are read-only, trying to
SELECT the session value tells they are global only. Selecting the
global value works. It delivers the same value as SHOW VARIABLES.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
In order to handle CHAR() fields, 8 bits were reserved for
the size of the CHAR field. However, instead of denoting the
number of characters in the field, field_length was used which
denotes the number of bytes in the field.
Since UTF-8 fields can have three bytes per character (and
has been extended to have four bytes per character in 6.0),
an extra two bits have been encoded in the field metadata
work for fields of type Field_string (i.e., CHAR fields).
Since the metadata word is filled, the extra bits have been
encoded in the upper 4 bits of the real type (the most
significant byte of the metadata word) by computing the
bitwise xor of the extra two bits. Since the upper 4 bits
of the real type always is 1111 for Field_string, this
means that for fields of length <256, the encoding is
identical to the encoding used in pre-5.1.26 servers, but
for lengths of 256 or more, an unrecognized type is formed,
causing an old slave (that does not handle lengths of 256
or more) to stop.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
using a trig in SP
For all 5.0 and up to 5.1.12 exclusive, when a stored routine or
trigger caused an INSERT into an AUTO_INCREMENT column, the
generated AUTO_INCREMENT value should not be written into the
binary log, which means if a statement does not generate
AUTO_INCREMENT value itself, there will be no Intvar event (SET
INSERT_ID) associated with it even if one of the stored routine
or trigger caused generation of such a value. And meanwhile, when
executing a stored routine or trigger, it would ignore the
INSERT_ID value even if there is a INSERT_ID value available set
by a SET INSERT_ID statement.
Starting from MySQL 5.1.12, the generated AUTO_INCREMENT value is
written into the binary log, and the value will be used if
available when executing the stored routine or trigger.
Prior fix of this bug in MySQL 5.0 and prior MySQL 5.1.12
(referenced as the buggy versions in the text below), when a
statement that generates AUTO_INCREMENT value by the top
statement was executed in the body of a SP, all statements in the
SP after this statement would be treated as if they had generated
AUTO_INCREMENT by the top statement. When a statement that did
not generate AUTO_INCREMENT value by the top statement but by a
function/trigger called by it, an erroneous Intvar event would be
associated with the statement, this erroneous INSERT_ID value
wouldn't cause problem when replicating between masters and
slaves of 5.0.x or prior 5.1.12, because the erroneous INSERT_ID
value was not used when executing functions/triggers. But when
replicating from buggy versions to 5.1.12 or newer, which will
use the INSERT_ID value in functions/triggers, the erroneous
value will be used, which would cause duplicate entry error and
cause the slave to stop.
The patch for 5.1 fixed it to ignore the SET INSERT_ID value when
executing functions/triggers if it is replicating from a master
of buggy versions, another patch for 5.0 fixed it not to generate
the erroneous Intvar event.
|
| | | |\ \
| | | |/
| | | |
| | | | |
into riska.(none):/home/sven/bk/b34355-backslash_in_path_name_under_win/5.1-new-rpl
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
to leave
The artifact was caused by
a flaw in concurrent accessing the slave's io thd by
the io itself and a handling show slave status thread.
Namely, show_master_info did not acquire mi->run_lock mutex that is
specified for mi->io_thd member.
Fixed with deploying the mutex locking and unlocking. The mutex is kept
short time and without interleaving with mi->data_lock mutex.
Todo: to report and fix an issue with
sys_var_slave_skip_counter::{methods}
seem to acquire incorrectly
active_mi->rli.run_lock
instead of the specified
active_mi->rli.data_lock
A test case is difficult to compose, so rpl_packet should continue serving
as the indicator.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Problem: it is unsafe to read base64-printed events without first
reading the Format_description_log_event (FD). Currently, mysqlbinlog
cannot print the FD.
As a side effect, another bug has also been fixed: When mysqlbinlog
--start-position=X was specified, no ROLLBACK was printed. I changed
this, so that ROLLBACK is always printed.
This patch does several things:
- Format_description_log_event (FD) now print themselves in base64
format.
- mysqlbinlog is now able to print FD events. It has three modes:
--base64-output=auto Print row events in base64 output, and print
FD event. The FD event is printed even if
it is outside the range specified with
--start-position, because it would not be
safe to read row events otherwise. This is
the default.
--base64-output=always Like --base64-output=auto, but also print
base64 output for query events. This is
like the old --base64-output flag, which
is also a shorthand for
--base64-output=always
--base64-output=never Never print base64 output, generate error if
row events occur in binlog. This is
useful to suppress the FD event in binlogs
known not to contain row events (e.g.,
because BINLOG statement is unsafe,
requires root privileges, is not SQL, etc)
- the BINLOG statement now handles FD events correctly, by setting
the thread's rli's relay log's description_event_for_exec to the
loaded event.
In fact, executing a BINLOG statement is almost the same as reading
an event from a relay log. Before my patch, the code for this was
separated (exec_relay_log_event in slave.cc executes events from
the relay log, mysql_client_binlog_statement in sql_binlog.cc
executes BINLOG statements). I needed to augment
mysql_client_binlog_statement to do parts of what
exec_relay_log_event does. Hence, I did a small refactoring and
moved parts of exec_relay_log_event to a new function, which I
named apply_event_and_update_pos. apply_event_and_update_pos is
called both from exec_relay_log_event and from
mysql_client_binlog_statement.
- When a non-FD event is executed in a BINLOG statement, without
previously executing a FD event in a BINLOG statement, it generates
an error, because that's unsafe. I took a new error code for that:
ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENTS.
In order to get a decent error message containing the name of the
event, I added the class method char*
Log_event::get_type_str(Log_event_type type), which returns a
string name for the given Log_event_type. This is just like the
existing char* Log_event::get_type_str(), except it is a class
method that takes the log event type as parameter.
I also added PRE_GA_*_ROWS_LOG_EVENT to Log_event::get_type_str(),
so that names of old rows event are properly printed.
- When reading an event, I added a check that the event type is known
by the current Format_description_log_event. Without this, it may
crash on bad input (and I was struck by this several times).
- I patched the following test cases, which all contain BINLOG
statements for row events which must be preceded by BINLOG
statements for FD events:
- rpl_bug31076
While I was here, I fixed some small things in log_event.cc:
- replaced hard-coded 4 by EVENT_TYPE_OFFSET in 3 places
- replaced return by DBUG_VOID_RETURN in one place
- The name of the logfile can be '-' to indicate stdin. Before my
patch, the code just checked if the first character is '-'; now it
does a full strcmp(). Probably, all arguments that begin with a -
are already handled somewhere else as flags, but I still think it
is better that the code reflects what it is supposed to do, with as
little dependencies as possible on other parts of the code. If we
one day implement that all command line arguments after -- are
files (as most unix tools do), then we need this.
I also fixed the following in slave.cc:
- next_event() was declared twice, and queue_event was not static but
should be static (not used outside the file).
|
| | | |\ \
| | | | |
| | | | |
| | | | | |
into sita.local:/Users/tsmith/m/bk/maint/51
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Removing unguarded read of slave_running field from inside
terminate_slave_threads(). This could cause premature exit in the event
that the slave thread already were shutting down, but isn't finished yet.
The fields slave_running, io_thd, and sql_thread are guarded by an
associated run_lock. A read of these fields were not guarded inside
terminate_slave_threads(), which caused an assertion to fire. The
assertion was removed, and the code reorganized slightly.
|
| | | |\ \ \
| | | | | |
| | | | | |
| | | | | | |
into weblab.(none):/home/marcsql/TREE/mysql-5.1-rt-merge
|
| | | | |/ / |
|
| | | | | |
| | | | |
| | | | |
| | | | | |
standards (and help Doxygen generating good documentation).
|
| | | |/ /
| | | |
| | | |
| | | | |
(and be more friendly to Doxygen by removing unnecessary typedefs).
|
| | | |\ \
| | | | |
| | | | |
| | | | | |
into kindahl-laptop.dnsalias.net:/home/bk/b24954-mysql-5.1-new-rpl
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
reached):
Adding new fields Last_{IO,SQL}_Errno and Last_{IO,SQL}_Error to output
of SHOW SLAVE STATUS to hold errors from I/O and SQL thread respectively.
Old fields Last_Error and Last_Errno are aliases for Last_SQL_Error and
Last_SQL_Errno respectively.
Fields are added last to output of SHOW SLAVE STATUS to allow old applications
to use the same positional arguments into the row, while allowing new
application to benefit from the added information.
In addition, some new error codes are added (especially for the I/O
thread) to be able to provide sensible error message.
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
(first part)
The following type conversions was done:
- Changed byte to uchar
- Changed gptr to uchar*
- Change my_string to char *
- Change my_size_t to size_t
- Change size_s to size_t
Removed declaration of byte, gptr, my_string, my_size_t and size_s.
Following function parameter changes was done:
- All string functions in mysys/strings was changed to use size_t
instead of uint for string lengths.
- All read()/write() functions changed to use size_t (including vio).
- All protocoll functions changed to use size_t instead of uint
- Functions that used a pointer to a string length was changed to use size_t*
- Changed malloc(), free() and related functions from using gptr to use void *
as this requires fewer casts in the code and is more in line with how the
standard functions work.
- Added extra length argument to dirname_part() to return the length of the
created string.
- Changed (at least) following functions to take uchar* as argument:
- db_dump()
- my_net_write()
- net_write_command()
- net_store_data()
- DBUG_DUMP()
- decimal2bin() & bin2decimal()
- Changed my_compress() and my_uncompress() to use size_t. Changed one
argument to my_uncompress() from a pointer to a value as we only return
one value (makes function easier to use).
- Changed type of 'pack_data' argument to packfrm() to avoid casts.
- Changed in readfrm() and writefrom(), ha_discover and handler::discover()
the type for argument 'frmdata' to uchar** to avoid casts.
- Changed most Field functions to use uchar* instead of char* (reduced a lot of
casts).
- Changed field->val_xxx(xxx, new_ptr) to take const pointers.
Other changes:
- Removed a lot of not needed casts
- Added a few new cast required by other changes
- Added some cast to my_multi_malloc() arguments for safety (as string lengths
needs to be uint, not size_t).
- Fixed all calls to hash-get-key functions to use size_t*. (Needed to be done
explicitely as this conflict was often hided by casting the function to
hash_get_key).
- Changed some buffers to memory regions to uchar* to avoid casts.
- Changed some string lengths from uint to size_t.
- Changed field->ptr to be uchar* instead of char*. This allowed us to
get rid of a lot of casts.
- Some changes from true -> TRUE, false -> FALSE, unsigned char -> uchar
- Include zlib.h in some files as we needed declaration of crc32()
- Changed MY_FILE_ERROR to be (size_t) -1.
- Changed many variables to hold the result of my_read() / my_write() to be
size_t. This was needed to properly detect errors (which are
returned as (size_t) -1).
- Removed some very old VMS code
- Changed packfrm()/unpackfrm() to not be depending on uint size
(portability fix)
- Removed windows specific code to restore cursor position as this
causes slowdown on windows and we should not mix read() and pread()
calls anyway as this is not thread safe. Updated function comment to
reflect this. Changed function that depended on original behavior of
my_pwrite() to itself restore the cursor position (one such case).
- Added some missing checking of return value of malloc().
- Changed definition of MOD_PAD_CHAR_TO_FULL_LENGTH to avoid 'long' overflow.
- Changed type of table_def::m_size from my_size_t to ulong to reflect that
m_size is the number of elements in the array, not a string/memory
length.
- Moved THD::max_row_length() to table.cc (as it's not depending on THD).
Inlined max_row_length_blob() into this function.
- More function comments
- Fixed some compiler warnings when compiled without partitions.
- Removed setting of LEX_STRING() arguments in declaration (portability fix).
- Some trivial indentation/variable name changes.
- Some trivial code simplifications:
- Replaced some calls to alloc_root + memcpy to use
strmake_root()/strdup_root().
- Changed some calls from memdup() to strmake() (Safety fix)
- Simpler loops in client-simple.c
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
skipped):
By moving statement end actions from Rows_log_event::do_apply_event() to
Rows_log_event::do_update_pos() they will always be executed, even if
Rows_log_event::do_apply_event() is skipped because the event originated
at the same server. This because Rows_log_event::do_update_pos() is always
executed (unless Rows_log_event::do_apply_event() failed with an error,
in which case the slave stops with an error anyway).
Adding test case.
Fixing logic to detect if inside a group. If a rotate event occured
when an initial prefix of events for a statement, but for which the
table did contain a key, last_event_start_time is set to zero, causing
rotate to end the group but without unlocking any tables. This left a
lock hanging around, which subsequently triggered an assertion when a
second attempt was made to lock the same sequence of tables.
In order to solve the above problem, a new flag was added to the relay
log info structure that is used to indicate that the replication thread
is currently executing a statement. Using this flag, the replication
thread is in a group if it is either in a statement or inside a trans-
action.
The patch also eliminates some gratuitous header file inclusions that
were not needed (and caused compile errors) and replaced them with
forward definitions.
|
| | | |\ \ \
| | | | | |
| | | | | |
| | | | | | |
into romeo.(none):/home/bk/b23171-mysql-5.1-new-rpl
|
| | | | |/ /
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Second patch to fix skipping code. Moving relay and binary log
position changing code from do_apply_event [old exec_event()] into
do_update_pos() and doing other changes necessary to support that.
Fixing a bug that can cause deadlock if rotating binary log when committing
a changes to a transactional table that is not inside a transaction and
cause a rotate log.
|
| | | |\ \ \
| | | | | |
| | | | | |
| | | | | | |
into mysql.com:/nfsdisk1/lars/MERGE/mysql-5.1-merge
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | | |
Post-merge fixes.
|
| | | | |\ \ \
| | | | | | |
| | | | | | |
| | | | | | | |
into romeo.(none):/home/bk/b19033-mysql-5.1-new-rpl
|
| | | | | |\ \ \
| | | | | | |/
| | | | | |/|
| | | | | | | |
into gbichot3.local:/home/mysql_src/mysql-5.1-rpl-25507
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
"INSERT... ON DUPLICATE KEY UPDATE skips auto_increment values".
When in an INSERT ON DUPLICATE KEY UPDATE, using
an autoincrement column, we inserted some autogenerated values and
also updated some rows, some autogenerated values were not used
(for example, even if 10 was the largest autoinc value in the table
at the start of the statement, 12 could be the first autogenerated
value inserted by the statement, instead of 11). One autogenerated
value was lost per updated row. Led to exhausting the range of the
autoincrement column faster.
Bug introduced by fix of BUG#20188; present since 5.0.24 and 5.1.12.
This bug breaks replication from a pre-5.0.24 master.
But the present bugfix, as it makes INSERT ON DUP KEY UPDATE
behave like pre-5.0.24, breaks replication from a [5.0.24,5.0.34]
master to a fixed (5.0.36) slave! To warn users against this when
they upgrade their slave, as agreed with the support team, we add
code for a fixed slave to detect that it is connected to a buggy
master in a situation (INSERT ON DUP KEY UPDATE into autoinc column)
likely to break replication, in which case it cannot replicate so
stops and prints a message to the slave's error log and to SHOW SLAVE
STATUS.
For 5.0.36->[5.0.24,5.0.34] replication we cannot warn as master
does not know the slave's version (but we always recommended to users
to have slave at least as new as master).
As agreed with support, I'll also ask for an alert to be put into
the MySQL Network Monitoring and Advisory Service.
|
| | | | |\ \ \ \
| | | | |/ / /
| | | |/| | |
| | | | | | | |
into romeo.(none):/home/bk/b19033-mysql-5.1-new-rpl
|
