| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| | |
|
| |\
| |
| |
| | |
into bodhi.(none):/opt/local/work/mysql-5.1-runtime
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
causes full table lock on innodb table.
Also fixes Bug#28502 Triggers that update another innodb table
will block on X lock unnecessarily (duplciate).
Code review fixes.
Both bugs' synopses are misleading: InnoDB table is
not X locked. The statements, however, cannot proceed concurrently,
but this happens due to lock conflicts for tables used in triggers,
not for the InnoDB table.
If a user had an InnoDB table, and two triggers, AFTER UPDATE and
AFTER INSERT, competing for different resources (e.g. two distinct
MyISAM tables), then these two triggers would not be able to execute
concurrently. Moreover, INSERTS/UPDATES of the InnoDB table would
not be able to run concurrently.
The problem had other side-effects (see respective bug reports).
This behavior was a consequence of a shortcoming of the pre-locking
algorithm, which would not distinguish between different DML operations
(e.g. INSERT and DELETE) and pre-lock all the tables
that are used by any trigger defined on the subject table.
The idea of the fix is to extend the pre-locking algorithm to keep track,
for each table, what DML operation it is used for and not
load triggers that are known to never be fired.
|
| | |\
| | |
| | |
| | | |
into mysql.com:/windows/Linux_space/MySQL/mysql-5.0-ndb
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
- BUG#11986: Stored routines and triggers can fail if the code
has a non-ascii symbol
- BUG#16291: mysqldump corrupts string-constants with non-ascii-chars
- BUG#19443: INFORMATION_SCHEMA does not support charsets properly
- BUG#21249: Character set of SP-var can be ignored
- BUG#25212: Character set of string constant is ignored (stored routines)
- BUG#25221: Character set of string constant is ignored (triggers)
There were a few general problems that caused these bugs:
1. Character set information of the original (definition) query for views,
triggers, stored routines and events was lost.
2. mysqldump output query in client character set, which can be
inappropriate to encode definition-query.
3. INFORMATION_SCHEMA used strings with mixed encodings to display object
definition;
1. No query-definition-character set.
In order to compile query into execution code, some extra data (such as
environment variables or the database character set) is used. The problem
here was that this context was not preserved. So, on the next load it can
differ from the original one, thus the result will be different.
The context contains the following data:
- client character set;
- connection collation (character set and collation);
- collation of the owner database;
The fix is to store this context and use it each time we parse (compile)
and execute the object (stored routine, trigger, ...).
2. Wrong mysqldump-output.
The original query can contain several encodings (by means of character set
introducers). The problem here was that we tried to convert original query
to the mysqldump-client character set.
Moreover, we stored queries in different character sets for different
objects (views, for one, used UTF8, triggers used original character set).
The solution is
- to store definition queries in the original character set;
- to change SHOW CREATE statement to output definition query in the
binary character set (i.e. without any conversion);
- introduce SHOW CREATE TRIGGER statement;
- to dump special statements to switch the context to the original one
before dumping and restore it afterwards.
Note, in order to preserve the database collation at the creation time,
additional ALTER DATABASE might be used (to temporary switch the database
collation back to the original value). In this case, ALTER DATABASE
privilege will be required. This is a backward-incompatible change.
3. INFORMATION_SCHEMA showed non-UTF8 strings
The fix is to generate UTF8-query during the parsing, store it in the object
and show it in the INFORMATION_SCHEMA.
Basically, the idea is to create a copy of the original query convert it to
UTF8. Character set introducers are removed and all text literals are
converted to UTF8.
This UTF8 query is intended to provide user-readable output. It must not be
used to recreate the object. Specialized SHOW CREATE statements should be
used for this.
The reason for this limitation is the following: the original query can
contain symbols from several character sets (by means of character set
introducers).
Example:
- original query:
CREATE VIEW v1 AS SELECT _cp1251 'Hello' AS c1;
- UTF8 query (for INFORMATION_SCHEMA):
CREATE VIEW v1 AS SELECT 'Hello' AS c1;
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The patch contains the following changes:
- Introduce auxilary functions to convenient work with character sets:
- resolve_charset();
- resolve_collation();
- get_default_db_collation();
- Introduce lex_string_set();
- Refactor Table_trigger_list::process_triggers() &
sp_head::execute_trigger() to be consistent with other code;
- Move reusable code from add_table_for_trigger() into
build_trn_path(), check_trn_exists() and load_table_name_for_trigger()
to be used in the following patch.
- Rename triggers_file_ext and trigname_file_ext into TRN_EXT and
TRG_EXT respectively.
|
| |\ \ \
| | | |
| | | |
| | | | |
into mysql.com:/windows/Linux_space/MySQL/mysql-5.1-new-ndb
|
| | |\ \ \
| | | |/
| | |/|
| | | | |
into mysql.com:/windows/Linux_space/MySQL/mysql-5.1
|
| | | | | |
|
| |\ \ \ \
| |/ / /
| | | |
| | | | |
into mysql.com:/windows/Linux_space/MySQL/mysql-5.1-new-ndb
|
| | |\ \ \
| | |/ /
| | | |
| | | | |
into mysql.com:/windows/Linux_space/MySQL/mysql-5.1
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
In certain cases AFTER UPDATE/DELETE triggers on NDB tables that referenced
subject table didn't see the results of operation which caused invocation
of those triggers. In other words AFTER trigger invoked as result of update
(or deletion) of particular row saw version of this row before update (or
deletion).
The problem occured because NDB handler in those cases postponed actual
update/delete operations to be able to perform them later as one batch.
This fix solves the problem by disabling this optimization for particular
operation if subject table has AFTER trigger for this operation defined.
To achieve this we introduce two new flags for handler::extra() method:
HA_EXTRA_DELETE_CANNOT_BATCH and HA_EXTRA_UPDATE_CANNOT_BATCH.
These are called if there exists AFTER DELETE/UPDATE triggers during a
statement that potentially can generate calls to delete_row()/update_row().
This includes multi_delete/multi_update statements as well as insert statements
that do delete/update as part of an ON DUPLICATE statement.
|
| |\ \ \ \
| |/ / /
|/| | /
| | |/
| |/| |
into mysql.com:/nfsdisk1/lars/bk/mysql-5.1-new-rpl
|
| | |\ \
| | | |
| | | |
| | | | |
into mysql.com:/home/bar/mysql-5.0.b24478
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | | |
Problem: DROP TRIGGER was not properly handled in combination
with slave filters, which made replication stop
Fix: loading table name before checking slave filters when
dropping a trigger.
|
| |\ \ \
| |/ /
| | |
| | |
| | | |
into mysql.com:/home/my/mysql-5.1
Merge of 'remove compiler warnings when using -Wshadow'
|
| | |\ \
| | | |
| | | |
| | | | |
into mysql.com:/home/my/mysql-5.0
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
|
| |\ \ \
| |/ /
| | |
| | | |
into mysql.com:/home/kent/bk/main/mysql-5.1
|
| | |/
| |
| |
| | |
Changed header to GPL version 2 only
|
| |\ \
| |/
| |
| | |
into mockturtle.local:/home/dlenev/src/mysql-5.1-bg20670
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
this key does not stop" (version for 5.0 only).
UPDATE statement which WHERE clause used key and which invoked trigger
that modified field in this key worked indefinetely.
This problem occured because in cases when UPDATE statement was
executed in update-on-the-fly mode (in which row is updated right
during evaluation of select for WHERE clause) the new version of
the row became visible to select representing WHERE clause and was
updated again and again.
We already solve this problem for UPDATE statements which does not
invoke triggers by detecting the fact that we are going to update
field in key used for scanning and performing update in two steps,
during the first step we gather information about the rows to be
updated and then doing actual updates. We also do this for
MULTI-UPDATE and in its case we even detect situation when such
fields are updated in triggers (actually we simply assume that
we always update fields used in key if we have before update
trigger).
The fix simply extends this check which is done in check_if_key_used()/
QUICK_SELECT_I::check_if_keys_used() routine/method in such way that
it also detects cases when field used in key is updated in trigger.
As nice side-effect we have more precise and thus more optimal
perfomance-wise check for the MULTI-UPDATE.
Also check_if_key_used()/QUICK_SELECT_I::check_if_keys_used() were
renamed to is_key_used()/QUICK_SELECT_I::is_keys_used() in order to
better reflect that boolean predicate.
Note that this check is implemented in much more elegant way in 5.1
|
| |\ \
| |/
| |
| | |
into bodhi.local:/opt/local/work/mysql-5.1-runtime-merge
|
| | |
| |
| |
| |
| |
| | |
Changed trigger-handling code so that there will be the one
place for generate statement string for replication log
and for trigger file.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
before update trigger on NDB table".
Two main changes:
- We use TABLE::read_set/write_set bitmaps for marking fields used by
statement instead of Field::query_id in 5.1.
- Now when we mark columns used by statement we take into account columns
used by table's triggers instead of marking all columns as used if table
has triggers.
|
| |\ \
| |/
| |
| | |
into mysql.com:/home/dlenev/mysql-5.1-bg18437
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
NDB table".
SQL-layer was not marking fields which were used in triggers as such. As
result these fields were not always properly retrieved/stored by handler
layer. So one might got wrong values or lost changes in triggers for NDB,
Federated and possibly InnoDB tables.
This fix solves the problem by marking fields used in triggers
appropriately.
Also this patch contains the following cleanup of ha_ndbcluster code:
We no longer rely on reading LEX::sql_command value in handler in order
to determine if we can enable optimization which allows us to handle REPLACE
statement in more efficient way by doing replaces directly in write_row()
method without reporting error to SQL-layer.
Instead we rely on SQL-layer informing us whether this optimization
applicable by calling handler::extra() method with
HA_EXTRA_WRITE_CAN_REPLACE flag.
As result we no longer apply this optimzation in cases when it should not
be used (e.g. if we have on delete triggers on table) and use in some
additional cases when it is applicable (e.g. for LOAD DATA REPLACE).
Finally this patch includes fix for bug#20728 "REPLACE does not work
correctly for NDB table with PK and unique index".
This was yet another problem which was caused by improper field mark-up.
During row replacement fields which weren't explicity used in REPLACE
statement were not marked as fields to be saved (updated) so they have
retained values from old row version. The fix is to mark all table
fields as set for REPLACE statement. Note that in 5.1 we already solve
this problem by notifying handler that it should save values from all
fields only in case when real replacement happens.
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
includes fixes and cleanups that was found necessary while testing the handler changes
Changes that requires code changes in other code of other storage engines.
(Note that all changes are very straightforward and one should find all issues
by compiling a --debug build and fixing all compiler errors and all
asserts in field.cc while running the test suite),
- New optional handler function introduced: reset()
This is called after every DML statement to make it easy for a handler to
statement specific cleanups.
(The only case it's not called is if force the file to be closed)
- handler::extra(HA_EXTRA_RESET) is removed. Code that was there before
should be moved to handler::reset()
- table->read_set contains a bitmap over all columns that are needed
in the query. read_row() and similar functions only needs to read these
columns
- table->write_set contains a bitmap over all columns that will be updated
in the query. write_row() and update_row() only needs to update these
columns.
The above bitmaps should now be up to date in all context
(including ALTER TABLE, filesort()).
The handler is informed of any changes to the bitmap after
fix_fields() by calling the virtual function
handler::column_bitmaps_signal(). If the handler does caching of
these bitmaps (instead of using table->read_set, table->write_set),
it should redo the caching in this code. as the signal() may be sent
several times, it's probably best to set a variable in the signal
and redo the caching on read_row() / write_row() if the variable was
set.
- Removed the read_set and write_set bitmap objects from the handler class
- Removed all column bit handling functions from the handler class.
(Now one instead uses the normal bitmap functions in my_bitmap.c instead
of handler dedicated bitmap functions)
- field->query_id is removed. One should instead instead check
table->read_set and table->write_set if a field is used in the query.
- handler::extra(HA_EXTRA_RETRIVE_ALL_COLS) and
handler::extra(HA_EXTRA_RETRIEVE_PRIMARY_KEY) are removed. One should now
instead use table->read_set to check for which columns to retrieve.
- If a handler needs to call Field->val() or Field->store() on columns
that are not used in the query, one should install a temporary
all-columns-used map while doing so. For this, we provide the following
functions:
my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->read_set);
field->val();
dbug_tmp_restore_column_map(table->read_set, old_map);
and similar for the write map:
my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->write_set);
field->val();
dbug_tmp_restore_column_map(table->write_set, old_map);
If this is not done, you will sooner or later hit a DBUG_ASSERT
in the field store() / val() functions.
(For not DBUG binaries, the dbug_tmp_restore_column_map() and
dbug_tmp_restore_column_map() are inline dummy functions and should
be optimized away be the compiler).
- If one needs to temporary set the column map for all binaries (and not
just to avoid the DBUG_ASSERT() in the Field::store() / Field::val()
methods) one should use the functions tmp_use_all_columns() and
tmp_restore_column_map() instead of the above dbug_ variants.
- All 'status' fields in the handler base class (like records,
data_file_length etc) are now stored in a 'stats' struct. This makes
it easier to know what status variables are provided by the base
handler. This requires some trivial variable names in the extra()
function.
- New virtual function handler::records(). This is called to optimize
COUNT(*) if (handler::table_flags() & HA_HAS_RECORDS()) is true.
(stats.records is not supposed to be an exact value. It's only has to
be 'reasonable enough' for the optimizer to be able to choose a good
optimization path).
- Non virtual handler::init() function added for caching of virtual
constants from engine.
- Removed has_transactions() virtual method. Now one should instead return
HA_NO_TRANSACTIONS in table_flags() if the table handler DOES NOT support
transactions.
- The 'xxxx_create_handler()' function now has a MEM_ROOT_root argument
that is to be used with 'new handler_name()' to allocate the handler
in the right area. The xxxx_create_handler() function is also
responsible for any initialization of the object before returning.
For example, one should change:
static handler *myisam_create_handler(TABLE_SHARE *table)
{
return new ha_myisam(table);
}
->
static handler *myisam_create_handler(TABLE_SHARE *table, MEM_ROOT *mem_root)
{
return new (mem_root) ha_myisam(table);
}
- New optional virtual function: use_hidden_primary_key().
This is called in case of an update/delete when
(table_flags() and HA_PRIMARY_KEY_REQUIRED_FOR_DELETE) is defined
but we don't have a primary key. This allows the handler to take precisions
in remembering any hidden primary key to able to update/delete any
found row. The default handler marks all columns to be read.
- handler::table_flags() now returns a ulonglong (to allow for more flags).
- New/changed table_flags()
- HA_HAS_RECORDS Set if ::records() is supported
- HA_NO_TRANSACTIONS Set if engine doesn't support transactions
- HA_PRIMARY_KEY_REQUIRED_FOR_DELETE
Set if we should mark all primary key columns for
read when reading rows as part of a DELETE
statement. If there is no primary key,
all columns are marked for read.
- HA_PARTIAL_COLUMN_READ Set if engine will not read all columns in some
cases (based on table->read_set)
- HA_PRIMARY_KEY_ALLOW_RANDOM_ACCESS
Renamed to HA_PRIMARY_KEY_REQUIRED_FOR_POSITION.
- HA_DUPP_POS Renamed to HA_DUPLICATE_POS
- HA_REQUIRES_KEY_COLUMNS_FOR_DELETE
Set this if we should mark ALL key columns for
read when when reading rows as part of a DELETE
statement. In case of an update we will mark
all keys for read for which key part changed
value.
- HA_STATS_RECORDS_IS_EXACT
Set this if stats.records is exact.
(This saves us some extra records() calls
when optimizing COUNT(*))
- Removed table_flags()
- HA_NOT_EXACT_COUNT Now one should instead use HA_HAS_RECORDS if
handler::records() gives an exact count() and
HA_STATS_RECORDS_IS_EXACT if stats.records is exact.
- HA_READ_RND_SAME Removed (no one supported this one)
- Removed not needed functions ha_retrieve_all_cols() and ha_retrieve_all_pk()
- Renamed handler::dupp_pos to handler::dup_pos
- Removed not used variable handler::sortkey
Upper level handler changes:
- ha_reset() now does some overall checks and calls ::reset()
- ha_table_flags() added. This is a cached version of table_flags(). The
cache is updated on engine creation time and updated on open.
MySQL level changes (not obvious from the above):
- DBUG_ASSERT() added to check that column usage matches what is set
in the column usage bit maps. (This found a LOT of bugs in current
column marking code).
- In 5.1 before, all used columns was marked in read_set and only updated
columns was marked in write_set. Now we only mark columns for which we
need a value in read_set.
- Column bitmaps are created in open_binary_frm() and open_table_from_share().
(Before this was in table.cc)
- handler::table_flags() calls are replaced with handler::ha_table_flags()
- For calling field->val() you must have the corresponding bit set in
table->read_set. For calling field->store() you must have the
corresponding bit set in table->write_set. (There are asserts in
all store()/val() functions to catch wrong usage)
- thd->set_query_id is renamed to thd->mark_used_columns and instead
of setting this to an integer value, this has now the values:
MARK_COLUMNS_NONE, MARK_COLUMNS_READ, MARK_COLUMNS_WRITE
Changed also all variables named 'set_query_id' to mark_used_columns.
- In filesort() we now inform the handler of exactly which columns are needed
doing the sort and choosing the rows.
- The TABLE_SHARE object has a 'all_set' column bitmap one can use
when one needs a column bitmap with all columns set.
(This is used for table->use_all_columns() and other places)
- The TABLE object has 3 column bitmaps:
- def_read_set Default bitmap for columns to be read
- def_write_set Default bitmap for columns to be written
- tmp_set Can be used as a temporary bitmap when needed.
The table object has also two pointer to bitmaps read_set and write_set
that the handler should use to find out which columns are used in which way.
- count() optimization now calls handler::records() instead of using
handler->stats.records (if (table_flags() & HA_HAS_RECORDS) is true).
- Added extra argument to Item::walk() to indicate if we should also
traverse sub queries.
- Added TABLE parameter to cp_buffer_from_ref()
- Don't close tables created with CREATE ... SELECT but keep them in
the table cache. (Faster usage of newly created tables).
New interfaces:
- table->clear_column_bitmaps() to initialize the bitmaps for tables
at start of new statements.
- table->column_bitmaps_set() to set up new column bitmaps and signal
the handler about this.
- table->column_bitmaps_set_no_signal() for some few cases where we need
to setup new column bitmaps but don't signal the handler (as the handler
has already been signaled about these before). Used for the momement
only in opt_range.cc when doing ROR scans.
- table->use_all_columns() to install a bitmap where all columns are marked
as use in the read and the write set.
- table->default_column_bitmaps() to install the normal read and write
column bitmaps, but not signaling the handler about this.
This is mainly used when creating TABLE instances.
- table->mark_columns_needed_for_delete(),
table->mark_columns_needed_for_delete() and
table->mark_columns_needed_for_insert() to allow us to put additional
columns in column usage maps if handler so requires.
(The handler indicates what it neads in handler->table_flags())
- table->prepare_for_position() to allow us to tell handler that it
needs to read primary key parts to be able to store them in
future table->position() calls.
(This replaces the table->file->ha_retrieve_all_pk function)
- table->mark_auto_increment_column() to tell handler are going to update
columns part of any auto_increment key.
- table->mark_columns_used_by_index() to mark all columns that is part of
an index. It will also send extra(HA_EXTRA_KEYREAD) to handler to allow
it to quickly know that it only needs to read colums that are part
of the key. (The handler can also use the column map for detecting this,
but simpler/faster handler can just monitor the extra() call).
- table->mark_columns_used_by_index_no_reset() to in addition to other columns,
also mark all columns that is used by the given key.
- table->restore_column_maps_after_mark_index() to restore to default
column maps after a call to table->mark_columns_used_by_index().
- New item function register_field_in_read_map(), for marking used columns
in table->read_map. Used by filesort() to mark all used columns
- Maintain in TABLE->merge_keys set of all keys that are used in query.
(Simplices some optimization loops)
- Maintain Field->part_of_key_not_clustered which is like Field->part_of_key
but the field in the clustered key is not assumed to be part of all index.
(used in opt_range.cc for faster loops)
- dbug_tmp_use_all_columns(), dbug_tmp_restore_column_map()
tmp_use_all_columns() and tmp_restore_column_map() functions to temporally
mark all columns as usable. The 'dbug_' version is primarily intended
inside a handler when it wants to just call Field:store() & Field::val()
functions, but don't need the column maps set for any other usage.
(ie:: bitmap_is_set() is never called)
- We can't use compare_records() to skip updates for handlers that returns
a partial column set and the read_set doesn't cover all columns in the
write set. The reason for this is that if we have a column marked only for
write we can't in the MySQL level know if the value changed or not.
The reason this worked before was that MySQL marked all to be written
columns as also to be read. The new 'optimal' bitmaps exposed this 'hidden
bug'.
- open_table_from_share() does not anymore setup temporary MEM_ROOT
object as a thread specific variable for the handler. Instead we
send the to-be-used MEMROOT to get_new_handler().
(Simpler, faster code)
Bugs fixed:
- Column marking was not done correctly in a lot of cases.
(ALTER TABLE, when using triggers, auto_increment fields etc)
(Could potentially result in wrong values inserted in table handlers
relying on that the old column maps or field->set_query_id was correct)
Especially when it comes to triggers, there may be cases where the
old code would cause lost/wrong values for NDB and/or InnoDB tables.
- Split thd->options flag OPTION_STATUS_NO_TRANS_UPDATE to two flags:
OPTION_STATUS_NO_TRANS_UPDATE and OPTION_KEEP_LOG.
This allowed me to remove some wrong warnings about:
"Some non-transactional changed tables couldn't be rolled back"
- Fixed handling of INSERT .. SELECT and CREATE ... SELECT that wrongly reset
(thd->options & OPTION_STATUS_NO_TRANS_UPDATE) which caused us to loose
some warnings about
"Some non-transactional changed tables couldn't be rolled back")
- Fixed use of uninitialized memory in ha_ndbcluster.cc::delete_table()
which could cause delete_table to report random failures.
- Fixed core dumps for some tests when running with --debug
- Added missing FN_LIBCHAR in mysql_rm_tmp_tables()
(This has probably caused us to not properly remove temporary files after
crash)
- slow_logs was not properly initialized, which could maybe cause
extra/lost entries in slow log.
- If we get an duplicate row on insert, change column map to read and
write all columns while retrying the operation. This is required by
the definition of REPLACE and also ensures that fields that are only
part of UPDATE are properly handled. This fixed a bug in NDB and
REPLACE where REPLACE wrongly copied some column values from the replaced
row.
- For table handler that doesn't support NULL in keys, we would give an error
when creating a primary key with NULL fields, even after the fields has been
automaticly converted to NOT NULL.
- Creating a primary key on a SPATIAL key, would fail if field was not
declared as NOT NULL.
Cleanups:
- Removed not used condition argument to setup_tables
- Removed not needed item function reset_query_id_processor().
- Field->add_index is removed. Now this is instead maintained in
(field->flags & FIELD_IN_ADD_INDEX)
- Field->fieldnr is removed (use field->field_index instead)
- New argument to filesort() to indicate that it should return a set of
row pointers (not used columns). This allowed me to remove some references
to sql_command in filesort and should also enable us to return column
results in some cases where we couldn't before.
- Changed column bitmap handling in opt_range.cc to be aligned with TABLE
bitmap, which allowed me to use bitmap functions instead of looping over
all fields to create some needed bitmaps. (Faster and smaller code)
- Broke up found too long lines
- Moved some variable declaration at start of function for better code
readability.
- Removed some not used arguments from functions.
(setup_fields(), mysql_prepare_insert_check_table())
- setup_fields() now takes an enum instead of an int for marking columns
usage.
- For internal temporary tables, use handler::write_row(),
handler::delete_row() and handler::update_row() instead of
handler::ha_xxxx() for faster execution.
- Changed some constants to enum's and define's.
- Using separate column read and write sets allows for easier checking
of timestamp field was set by statement.
- Remove calls to free_io_cache() as this is now done automaticly in ha_reset()
- Don't build table->normalized_path as this is now identical to table->path
(after bar's fixes to convert filenames)
- Fixed some missed DBUG_PRINT(.."%lx") to use "0x%lx" to make it easier to
do comparision with the 'convert-dbug-for-diff' tool.
Things left to do in 5.1:
- We wrongly log failed CREATE TABLE ... SELECT in some cases when using
row based logging (as shown by testcase binlog_row_mix_innodb_myisam.result)
Mats has promised to look into this.
- Test that my fix for CREATE TABLE ... SELECT is indeed correct.
(I added several test cases for this, but in this case it's better that
someone else also tests this throughly).
Lars has promosed to do this.
|
| |\
| |
| |
| | |
into mysql.com:/home/dlenev/src/mysql-5.0-bg13525
|
| | |
| |
| |
| |
| |
| | |
Let us transfer triggers associated with table when we rename it (but only if
we are not changing database to which table belongs, in the latter case we will
emit error).
|
| |/
|
|
|
|
|
|
|
|
| |
- BUG#15166: Wrong update permissions required to execute triggers
- BUG#15196: Wrong select permission required to execute triggers
The idea of the fix is to check necessary privileges
in Item_trigger_field::fix_fields(), instead of having "special variables"
technique. To achieve this, we should pass to an Item_trigger_field instance
a flag, which will indicate the usage/access type of this trigger variable.
|
| |\
| |
| |
| | |
into mysql.com:/home/dlenev/src/mysql-5.0-bg11555-2
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
impossible view security".
We should not expose names of tables which are explicitly or implicitly (via
routine or trigger) used by view even if we find that they are missing.
So during building of list of prelocked tables for statement we track which
routines (and therefore tables for these routines) are used from views. We
mark elements of LEX::routines set which correspond to routines used in views
by setting Sroutine_hash_entry::belong_to_view member to point to TABLE_LIST
object for topmost view which uses routine. We propagate this mark to all
routines which are used by this routine and which we add to this set. We also
mark tables used by such routine which we add to the list of tables for
prelocking as belonging to this view.
|
| |\ \
| |/
|/|
| | |
into mysql.com:/usr/home/pem/bug14233/mysql-5.0
|
| | |
| |
| |
| |
| |
| | |
Added error checking for errors when attempting to use stored procedures
after the mysql.proc table has been dropped, corrupted, or tampered with.
Test cases were put in a separate file (sp-destruct.test).
|
| |/
|
|
| |
checks on trigger activation)
|
| |
|
|
|
|
|
|
|
|
|
| |
This bug occurs when some trigger for table used by DML statement is created
or changed while statement was waiting in lock_tables(). In this situation
prelocking set which we have calculated becames invalid which can easily lead
to errors and even in some cases to crashes.
With proposed patch we no longer silently reopen tables in lock_tables(),
instead caller of lock_tables() becomes responsible for reopening tables and
recalculation of prelocking set.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
restore it afterwards.
This allows us to use statement replication with functions and triggers
The following things are fixed with this patch:
- NOW() and automatic timestamps takes the value from the main event for functions and triggers (which allows these to replicate with statement level logging)
- No side effects for triggers or functions with auto-increment values(), last_insert_id(), rand() or found_rows()
- Triggers can't return result sets
Fixes bugs:
#12480: NOW() is not constant in a trigger
#12481: Using NOW() in a stored function breaks statement based replication
#12482: Triggers has side effects with auto_increment values
#11587: trigger causes lost connection error
|
| |\ |
|
| | |
| |
| |
| |
| |
| |
| |
| | |
prelocked mode for
its body, but lets each statement to get/release its own locks. This allows a broader set
of statements to be executed inside PROCEDUREs (but breaks replication)
This patch should fix BUG#8072, BUG#8766, BUG#9563, BUG#11126
|
| |/
|
|
| |
other sql_mode fixes
|
| |
|
|
|
|
|
| |
"Triggers have the wrong namespace"
"Triggers: duplicate names allowed"
"Triggers: CREATE TRIGGER does not accept fully qualified names"
"SHOW TRIGGERS"
|
| |
|
|
|
|
|
|
|
|
|
|
| |
crash if referencing a table" and several other related bugs.
Fix for bug #11834 "Re-execution of prepared statement with dropped function
crashes server." which was spotted during work on previous bugs.
Also couple of nice cleanups:
- Replaced two separate hashes for stored routines used by statement with one.
- Now instead of doing one pass through all routines used in statement for
caching them and then doing another pass for adding their tables to table
list, we do only one pass during which do both things.
|
| |
|
|
|
|
|
|
|
|
| |
We should not allow explicit or implicit transaction commits inside
of stored functions or triggers (so in autocommit mode we should not
do commits after execution of sub-statement).
Also since we don't support nested statement transactions in 5.0,
we shouldn't commit or rollback stmt transactions while we are inside
stored functions or triggers. This should be fixed in later (>=5.1)
releases.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
#5860 "Multi-table UPDATE does not activate update triggers"
#6812 "Triggers are not activated for INSERT ... SELECT"
#8755 "Trigger is not activated by LOAD DATA".
This patch also implements proper handling of triggers for special forms
of insert like REPLACE or INSERT ... ON DUPLICATE KEY UPDATE.
Also now we don't call after trigger in case when we have failed to
inserted/update or delete row. Trigger failure should stop statement
execution.
I have not properly tested handling of errors which happen inside of
triggers in this patch, since it is simplier to do this once we will be
able to access tables from triggers.
|
| |
|
|
| |
segfaults with --ps-protocol - not caused by my changes though; I'll file a bug report.
|
| |
|
|
|
| |
writing DROP and CREATE TRIGGER to binlog, disabling binlogging
of substatements, testing.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
and some SP-related cleanups.
- We don't have separate stage for calculation of list of tables
to be prelocked and doing implicit LOCK/UNLOCK any more.
Instead we calculate this list at open_tables() and do implicit
LOCK in lock_tables() (and UNLOCK in close_thread_tables()).
Also now we support cases when same table (with same alias) is
used several times in the same query in SP.
- Cleaned up execution of SP. Moved all common code which handles
LEX and does preparations before statement execution or complex
expression evaluation to auxilary sp_lex_keeper class. Now
all statements in SP (and corresponding instructions) that
evaluate expression which can contain subquery have their
own LEX.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
out of order". (final version)
Now instead of binding Item_trigger_field to TABLE objects during
trigger definition parsing at table open, we perform pass through
special list of all such objects in trigger. This allows easily check
all references to fields in old/new version of row in trigger during
execution of CREATE TRIGGER statement (this is more courtesy for users
since we can't check everything anyway).
We also report that such reference is bad by returning error from
Item_trigger_field::fix_fields() method (instead of setup_field())
This means that if trigger is broken we will bark during trigger
execution instead of trigger definition parsing at table open.
(i.e. now we allow to open tables with broken triggers).
|
| |
|
|
|
|
| |
If we have DELETE with always true WHERE clause we should not use
optimized delete_all_rows() method for tables with DELETE triggers,
because in this case we will lose side-effect of deletion.
|
