#
#  Engine-agnostic tests for statistics-based selectivity calculations.
#   - selectivity tests that depend on the engine should go into
#     t/selectivity.test. That test is run with myisam/innodb/xtradb.
#   - this file is for tests that don't depend on the engine. 
#
drop table if exists t0,t1,t2,t3;
select @@global.use_stat_tables;
@@global.use_stat_tables
COMPLEMENTARY
select @@session.use_stat_tables;
@@session.use_stat_tables
COMPLEMENTARY
set @save_use_stat_tables=@@use_stat_tables;
set use_stat_tables='preferably';
set @save_optimizer_use_condition_selectivity=@@optimizer_use_condition_selectivity;
set @save_histogram_size=@@histogram_size;
set @save_histogram_type=@@histogram_type;
#
# MDEV-5917: EITS: different order of predicates in IN (...) causes different estimates
#
create table t1(a int);
insert into t1 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t2 (col1 int);
# one value in 1..100 range
insert into t2 select ta.a + tb.a*10 from t1 ta, t1 tb;
# ten values in 100...200 range
insert into t2 select 100 + ta.a + tb.a*10 from t1 ta, t1 tb, t1 tc;
set histogram_type='SINGLE_PREC_HB';
set histogram_size=100;
set optimizer_use_condition_selectivity=4;
analyze table t2 persistent for all;
Table	Op	Msg_type	Msg_text
test.t2	analyze	status	Engine-independent statistics collected
test.t2	analyze	status	OK
# The following two must have the same in 'Extra' column:
explain extended select * from t2 where col1 IN (20, 180);
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	ALL	NULL	NULL	NULL	NULL	1100	1.00	Using where
Warnings:
Note	1003	select `test`.`t2`.`col1` AS `col1` from `test`.`t2` where `test`.`t2`.`col1` in (20,180)
explain extended select * from t2 where col1 IN (180, 20);
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	ALL	NULL	NULL	NULL	NULL	1100	1.00	Using where
Warnings:
Note	1003	select `test`.`t2`.`col1` AS `col1` from `test`.`t2` where `test`.`t2`.`col1` in (180,20)
drop table t1, t2;
#
# MDEV-5926: EITS: Histogram estimates for column=least_possible_value are wrong
#
create table t0(a int);
insert into t0 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t1(a int);
insert into t1 select ta.a from t0 ta, t0 tb, t0 tc;
set histogram_size=20;
set histogram_type='single_prec_hb';
analyze table t1 persistent for all;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Engine-independent statistics collected
test.t1	analyze	status	OK
set use_stat_tables='preferably';
set optimizer_use_condition_selectivity=4;
# Should select about 10%:
explain extended select * from t1 where a=2;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	1000	9.52	Using where
Warnings:
Note	1003	select `test`.`t1`.`a` AS `a` from `test`.`t1` where `test`.`t1`.`a` = 2
# Should select about 10%:
explain extended select * from t1 where a=1;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	1000	9.52	Using where
Warnings:
Note	1003	select `test`.`t1`.`a` AS `a` from `test`.`t1` where `test`.`t1`.`a` = 1
# Must not have filtered=100%:
explain extended select * from t1 where a=0;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	1000	9.52	Using where
Warnings:
Note	1003	select `test`.`t1`.`a` AS `a` from `test`.`t1` where `test`.`t1`.`a` = 0
# Again, must not have filtered=100%:
explain extended select * from t1 where a=-1;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	1000	9.52	Using where
Warnings:
Note	1003	select `test`.`t1`.`a` AS `a` from `test`.`t1` where `test`.`t1`.`a` = -1
drop table t0, t1;
#
# MDEV-4362: Selectivity estimates for IN (...) do not depend on whether the values are in range
#
create table t1 (col1 int);
set @a=-1;
create table t2 (a int)  select (@a:=@a+1) as a from information_schema.session_variables ta limit 100;
insert into t1 select ta.a from t2 ta, t2 tb where ta.a < 100 and tb.a < 100;
select min(col1), max(col1), count(*) from t1;
min(col1)	max(col1)	count(*)
0	99	10000
set histogram_size=100;
analyze table t1 persistent for all;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Engine-independent statistics collected
test.t1	analyze	status	OK
explain extended select * from t1 where col1 in (1,2,3);
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	10000	2.97	Using where
Warnings:
Note	1003	select `test`.`t1`.`col1` AS `col1` from `test`.`t1` where `test`.`t1`.`col1` in (1,2,3)
# Must not cause fp division by zero, or produce nonsense numbers:
explain extended select * from t1 where col1 in (-1,-2,-3);
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	10000	5.94	Using where
Warnings:
Note	1003	select `test`.`t1`.`col1` AS `col1` from `test`.`t1` where `test`.`t1`.`col1` in (-1,-2,-3)
explain extended select * from t1 where col1<=-1;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	10000	1.00	Using where
Warnings:
Note	1003	select `test`.`t1`.`col1` AS `col1` from `test`.`t1` where `test`.`t1`.`col1` <= -1
drop table t1, t2;
# 
# MDEV-5984: EITS: Incorrect filtered% value for single-table select with range access
# 
create table t1(a int);
insert into t1 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t2 (a int, b int, col1 varchar(64), col2 varchar(64), key(a,b));
insert into t2 select ta.a+10*tb.a, tc.a+10*td.a, 'filler-data1', 'filler-data2' from t1 ta, t1 tb, t1 tc, t1 td;
set histogram_size=100;
set optimizer_use_condition_selectivity=4;
set use_stat_tables='preferably';
analyze table t2 persistent for all;
Table	Op	Msg_type	Msg_text
test.t2	analyze	status	Engine-independent statistics collected
test.t2	analyze	status	Table is already up to date
# This must show filtered=100%:
explain extended select * from t2 where a in (1,2,3) and b in (1,2,3);
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	range	a	a	10	NULL	9	100.00	Using index condition
Warnings:
Note	1003	select `test`.`t2`.`a` AS `a`,`test`.`t2`.`b` AS `b`,`test`.`t2`.`col1` AS `col1`,`test`.`t2`.`col2` AS `col2` from `test`.`t2` where `test`.`t2`.`a` in (1,2,3) and `test`.`t2`.`b` in (1,2,3)
drop table t2, t1;
# 
# MDEV-5980: EITS: if condition is used for REF access, its selectivity is still in filtered%
# 
create table t0(a int);
insert into t0 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t1(key1 int, col1 int, key(key1));
insert into t1 select ta.a, ta.a from t0 ta, t0 tb, t0 tc;
set histogram_size=100;
set use_stat_tables='preferably';
set optimizer_use_condition_selectivity=4;
analyze table t1 persistent for all;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Engine-independent statistics collected
test.t1	analyze	status	Table is already up to date
# 10% is ok
explain extended select * from t1 where col1=2;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	1000	9.90	Using where
Warnings:
Note	1003	select `test`.`t1`.`key1` AS `key1`,`test`.`t1`.`col1` AS `col1` from `test`.`t1` where `test`.`t1`.`col1` = 2
# Must show 100%, not 10%
explain extended select * from t1 where key1=2;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	ref	key1	key1	5	const	99	100.00	
Warnings:
Note	1003	select `test`.`t1`.`key1` AS `key1`,`test`.`t1`.`col1` AS `col1` from `test`.`t1` where `test`.`t1`.`key1` = 2
drop table t0, t1;
# MDEV-6003: EITS: ref access, keypart2=const vs keypart2=expr - inconsistent filtered% value
# 
create table t0(a int);
insert into t0 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t1 (
kp1 int, kp2 int, 
filler1 char(100),
filler2 char(100),
key(kp1, kp2)
);
insert into t1 
select 
ta.a,
tb.a,
'filler-data-1',
'filler-data-2'
from t0 ta, t0 tb, t0 tc;
set histogram_size=100;
set use_stat_tables='preferably';
set optimizer_use_condition_selectivity=4;
analyze table t1 persistent for all;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Engine-independent statistics collected
test.t1	analyze	status	Table is already up to date
# NOTE: 10*100%, 10*100% rows is ok
explain extended select * from t0, t1 where t1.kp1=t0.a and t1.kp2=t0.a+1;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t0	ALL	NULL	NULL	NULL	NULL	10	100.00	Using where
1	SIMPLE	t1	ref	kp1	kp1	10	test.t0.a,func	10	100.00	Using index condition
Warnings:
Note	1003	select `test`.`t0`.`a` AS `a`,`test`.`t1`.`kp1` AS `kp1`,`test`.`t1`.`kp2` AS `kp2`,`test`.`t1`.`filler1` AS `filler1`,`test`.`t1`.`filler2` AS `filler2` from `test`.`t0` join `test`.`t1` where `test`.`t1`.`kp1` = `test`.`t0`.`a` and `test`.`t1`.`kp2` = `test`.`t0`.`a` + 1
# NOTE: t0: 10*100% is ok,  t1: 10*9.90% is bad. t1 should have 10*100%.
explain extended select * from t0, t1 where t1.kp1=t0.a and t1.kp2=4;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t0	ALL	NULL	NULL	NULL	NULL	10	100.00	Using where
1	SIMPLE	t1	ref	kp1	kp1	10	test.t0.a,const	10	100.00	
Warnings:
Note	1003	select `test`.`t0`.`a` AS `a`,`test`.`t1`.`kp1` AS `kp1`,`test`.`t1`.`kp2` AS `kp2`,`test`.`t1`.`filler1` AS `filler1`,`test`.`t1`.`filler2` AS `filler2` from `test`.`t0` join `test`.`t1` where `test`.`t1`.`kp1` = `test`.`t0`.`a` and `test`.`t1`.`kp2` = 4
drop table t0, t1;
# 
# MDEV-6209: Assertion `join->best_read < double(1.79769313486231570815e+308L)' 
#            failed in bool greedy_search with optimizer_use_condition_selectivity>1
# 
SET optimizer_use_condition_selectivity = 2;
CREATE TABLE t1 (a CHAR(6), b INT, PRIMARY KEY (a,b)) ENGINE=MyISAM;
INSERT INTO t1 VALUES ('foo',1),('bar',2);
SELECT * FROM t1 AS t1_1, t1 AS t1_2 WHERE NOT ( t1_1.a <> 'baz');
a	b	a	b
DROP TABLE t1;
# 
# MDEV-6308: Server crashes in table_multi_eq_cond_selectivity with ...
#
CREATE TABLE t1 (
id varchar(40) COLLATE utf8_bin,
dt datetime,
PRIMARY KEY (id)
);
INSERT INTO t1 VALUES ('foo','2011-04-12 05:18:08'),
('bar','2013-09-19 11:37:03');
CREATE TABLE t2 (
t1_id varchar(40) COLLATE utf8_bin,
f1 varchar(64),
f2 varchar(1024),
KEY (f1,f2(255))
);
INSERT INTO t2 VALUES ('foo','baz','qux'),('bar','baz','qux');
INSERT INTO t2 VALUES ('foo','bazz','qux'),('bar','bazz','qux');
set optimizer_use_condition_selectivity=2;
explain
select * from t1,t2 where t1.id = t2.t1_id and t2.f2='qux' and t2.f1='baz';
id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
1	SIMPLE	t2	ref	f1	f1	325	const,const	2	Using index condition; Using where
1	SIMPLE	t1	eq_ref	PRIMARY	PRIMARY	122	test.t2.t1_id	1	
select * from t1,t2 where t1.id = t2.t1_id and t2.f2='qux' and t2.f1='baz';
id	dt	t1_id	f1	f2
foo	2011-04-12 05:18:08	foo	baz	qux
bar	2013-09-19 11:37:03	bar	baz	qux
drop table t1,t2;
# 
# MDEV-5985: EITS: selectivity estimates look illogical for join and non-key equalities
#
create table t0(a int);
insert into t0 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t1(a int);
insert into t1 select ta.a + tb.a* 10 + tc.a * 100 from t0 ta, t0 tb, t0 tc;
create table t2 as select * from t1;
set histogram_size=100;
set use_stat_tables='preferably';
set optimizer_use_condition_selectivity=4;
analyze table t1 persistent for all;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Engine-independent statistics collected
test.t1	analyze	status	OK
analyze table t2 persistent for all;
Table	Op	Msg_type	Msg_text
test.t2	analyze	status	Engine-independent statistics collected
test.t2	analyze	status	OK
# Filtered will be 4.95, 9.90
explain extended select * from t1 ta, t2 tb where ta.a < 40 and tb.a < 100;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	ta	ALL	NULL	NULL	NULL	NULL	1000	4.95	Using where
1	SIMPLE	tb	ALL	NULL	NULL	NULL	NULL	1000	9.90	Using where; Using join buffer (flat, BNL join)
Warnings:
Note	1003	select `test`.`ta`.`a` AS `a`,`test`.`tb`.`a` AS `a` from `test`.`t1` `ta` join `test`.`t2` `tb` where `test`.`ta`.`a` < 40 and `test`.`tb`.`a` < 100
# Here, tb.filtered should not become 100%:
explain extended select * from t1 ta, t2 tb where ta.a < 40 and tb.a < 100 and tb.a=ta.a;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	ta	ALL	NULL	NULL	NULL	NULL	1000	4.95	Using where
1	SIMPLE	tb	ALL	NULL	NULL	NULL	NULL	1000	4.95	Using where; Using join buffer (flat, BNL join)
Warnings:
Note	1003	select `test`.`ta`.`a` AS `a`,`test`.`tb`.`a` AS `a` from `test`.`t1` `ta` join `test`.`t2` `tb` where `test`.`tb`.`a` = `test`.`ta`.`a` and `test`.`ta`.`a` < 40 and `test`.`ta`.`a` < 100
drop table t0,t1,t2;
#
# MDEV-8779: mysqld got signal 11 in sql/opt_range_mrr.cc:100(step_down_to)
#
set @tmp_mdev8779=@@optimizer_use_condition_selectivity;
set optimizer_use_condition_selectivity=5;
CREATE TABLE t1 (
i int(10) unsigned NOT NULL AUTO_INCREMENT,
n varchar(2048) NOT NULL,
d tinyint(1) unsigned NOT NULL,
p int(10) unsigned NOT NULL,
PRIMARY KEY (i)
) DEFAULT CHARSET=utf8;
insert into t1 values (1,'aaa',1,1), (2,'bbb',2,2);
SELECT * FROM t1 WHERE t1.d = 0 AND t1.p = '1' AND t1.i != '-1' AND t1.n = 'some text';
i	n	d	p
set optimizer_use_condition_selectivity= @tmp_mdev8779;
DROP TABLE t1;
#
# MDEV-23937: SIGSEGV in looped best_extension_by_limited_search from greedy_search
# (Testcase only)
#
set
@tmp_jcl= @@join_cache_level,
@tmp_ucs= @@optimizer_use_condition_selectivity;
set
join_cache_level=3,
optimizer_use_condition_selectivity=2;
CREATE TABLE t1 AS SELECT * FROM mysql.user;
CREATE TABLE t3 (b VARCHAR (1));
CREATE TABLE t2 (c2 INT);
INSERT INTO t2 VALUES (1);
EXPLAIN
SELECT * FROM t1 AS a NATURAL JOIN t1 AS b;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
1	SIMPLE	a	ALL	NULL	NULL	NULL	NULL	5	Using where
1	SIMPLE	b	hash_ALL	NULL	#hash#$hj	612	test.a.Host,test.a.User,test.a.Password,test.a.Select_priv,test.a.Insert_priv,test.a.Update_priv,test.a.Delete_priv,test.a.Create_priv,test.a.Drop_priv,test.a.Reload_priv,test.a.Shutdown_priv,test.a.Process_priv,test.a.File_priv,test.a.Grant_priv,test.a.References_priv,test.a.Index_priv,test.a.Alter_priv,test.a.Show_db_priv,test.a.Super_priv,test.a.Create_tmp_table_priv,test.a.Lock_tables_priv,test.a.Execute_priv,test.a.Repl_slave_priv,test.a.Repl_client_priv,test.a.Create_view_priv,test.a.Show_view_priv,test.a.Create_routine_priv,test.a.Alter_routine_priv,test.a.Create_user_priv,test.a.Event_priv,test.a.Trigger_priv,test.a.Create_tablespace_priv,test.a.Delete_history_priv,test.a.ssl_type,test.a.ssl_cipher,test.a.x509_issuer,test.a.x509_subject,test.a.max_questions,test.a.max_updates,test.a.max_connections,test.a.max_user_connections,test.a.plugin,test.a.authentication_string,test.a.password_expired,test.a.is_role,test.a.default_role,test.a.max_statement_time	5	Using where; Using join buffer (flat, BNLH join)
DROP TABLE t1,t2,t3;
# 
# End of the test file
# 
set use_stat_tables= @save_use_stat_tables;
set histogram_type=@save_histogram_type;
set histogram_size=@save_histogram_size;
set optimizer_use_condition_selectivity=@save_optimizer_use_condition_selectivity;