#!/bin/bash -ue # Copyright (C) 2017-2022 MariaDB # Copyright (C) 2013 Percona Inc # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; version 2 of the License. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; see the file COPYING. If not, write to the # Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston # MA 02110-1335 USA. # Documentation: # https://mariadb.com/kb/en/mariabackup-overview/ # https://www.percona.com/doc/percona-xtradb-cluster/manual/xtrabackup_sst.html # Make sure to read that before proceeding! OS="$(uname)" . $(dirname "$0")/wsrep_sst_common wsrep_check_datadir ealgo="" eformat="" ekey="" ekeyfile="" encrypt=0 ssyslog="" ssystag="" BACKUP_PID="" tcert="" tcap="" tpem="" tkey="" tmode='DISABLED' sockopt="" progress="" ttime=0 totime=0 lsn="" ecmd="" rlimit="" # Initially stagemsg="$WSREP_SST_OPT_ROLE" cpat="" speciald=1 ib_home_dir="" ib_log_dir="" ib_undo_dir="" sfmt="" strmcmd="" tfmt="" tcmd="" rebuild=0 rebuildcmd="" payload=0 pvformat="-F '%N => Rate:%r Avg:%a Elapsed:%t %e Bytes: %b %p'" pvopts="-f -i 10 -N $WSREP_SST_OPT_ROLE" STATDIR="" uextra=0 disver="" tmpopts="" itmpdir="" xtmpdir="" scomp="" sdecomp="" ssl_dhparams="" compress='none' compress_chunk="" compress_threads="" backup_threads="" encrypt_threads="" encrypt_chunk="" readonly SECRET_TAG='secret' sst_ver=-1 if [ -n "$(commandex pv)" ] && pv --help | grep -qw -F -- '-F'; then pvopts="$pvopts $pvformat" fi pcmd="pv $pvopts" declare -a RC BACKUP_BIN=$(commandex 'innobackupex') if [ -z "$BACKUP_BIN" ]; then wsrep_log_error 'innobackupex binary not found in path' exit 42 fi DATA="$WSREP_SST_OPT_DATA" INFO_FILE='xtrabackup_galera_info' IST_FILE='xtrabackup_ist' MAGIC_FILE="$DATA/$INFO_FILE" INNOAPPLYLOG="$DATA/innobackupex.prepare.log" INNOMOVELOG="$DATA/innobackupex.move.log" INNOBACKUPLOG="$DATA/innobackupex.backup.log" timeit() { local stage="$1" shift local cmd="$@" local x1 x2 took extcode if [ $ttime -eq 1 ]; then x1=$(date +%s) wsrep_log_info "Evaluating $cmd" eval "$cmd" extcode=$? x2=$(date +%s) took=$(( x2-x1 )) wsrep_log_info "NOTE: $stage took $took seconds" totime=$(( totime+took )) else wsrep_log_info "Evaluating $cmd" eval "$cmd" extcode=$? fi return $extcode } get_keys() { # $encrypt -eq 1 is for internal purposes only if [ $encrypt -ge 2 -o $encrypt -eq -1 ]; then return fi if [ $encrypt -eq 0 ]; then if [ -n "$ealgo" -o -n "$ekey" -o -n "$ekeyfile" ]; then wsrep_log_error "Options for encryption are specified," \ "but encryption itself is disabled. SST may fail." fi return fi if [ $sfmt = 'tar' ]; then wsrep_log_info "NOTE: key-based encryption (encrypt=1)" \ "cannot be enabled with tar format" encrypt=-1 return fi wsrep_log_info "Key based encryption enabled in my.cnf" if [ -z "$ealgo" ]; then wsrep_log_error "FATAL: Encryption algorithm empty from my.cnf, bailing out" exit 3 fi if [ -z "$ekey" ]; then if [ ! -r "$ekeyfile" ]; then wsrep_log_error "FATAL: Either key must be specified" \ "or keyfile must be readable" exit 3 fi fi if [ "$eformat" = 'openssl' ]; then get_openssl if [ -z "$OPENSSL_BINARY" ]; then wsrep_log_error "If encryption using the openssl is enabled," \ "then you need to install openssl" exit 2 fi ecmd="'$OPENSSL_BINARY' enc -$ealgo" if "$OPENSSL_BINARY" enc -help 2>&1 | grep -qw -F -- '-pbkdf2'; then ecmd="$ecmd -pbkdf2" elif "$OPENSSL_BINARY" enc -help 2>&1 | grep -qw -F -- '-iter'; then ecmd="$ecmd -iter 1" elif "$OPENSSL_BINARY" enc -help 2>&1 | grep -qw -F -- '-md'; then ecmd="$ecmd -md sha256" fi if [ -z "$ekey" ]; then ecmd="$ecmd -kfile '$ekeyfile'" else ecmd="$ecmd -k '$ekey'" fi elif [ "$eformat" = 'xbcrypt' ]; then if [ -z "$(commandex xbcrypt)" ]; then wsrep_log_error "If encryption using the xbcrypt is enabled," \ "then you need to install xbcrypt" exit 2 fi wsrep_log_info "NOTE: xbcrypt-based encryption," \ "supported only from Xtrabackup 2.1.4" if [ -z "$ekey" ]; then ecmd="xbcrypt --encrypt-algo='$ealgo' --encrypt-key-file='$ekeyfile'" else wsrep_log_info \ "Using the 'encrypt-key' option causes the encryption key" \ "to be set via the command-line and is considered insecure." \ "It is recommended to use the 'encrypt-key-file' option instead." ecmd="xbcrypt --encrypt-algo='$ealgo' --encrypt-key='$ekey'" fi if [ -n "$encrypt_threads" ]; then ecmd="$ecmd --encrypt-threads=$encrypt_threads" fi if [ -n "$encrypt_chunk" ]; then ecmd="$ecmd --encrypt-chunk-size=$encrypt_chunk" fi else wsrep_log_error "Unknown encryption format='$eformat'" exit 2 fi if [ "$WSREP_SST_OPT_ROLE" = 'joiner' ]; then ecmd="$ecmd -d" fi stagemsg="$stagemsg-XB-Encrypted" } get_transfer() { if [ $tfmt = 'nc' ]; then wsrep_log_info "Using netcat as streamer" wsrep_check_programs nc tcmd='nc' if [ "$WSREP_SST_OPT_ROLE" = 'joiner' ]; then if nc -h 2>&1 | grep -q -F 'ncat'; then wsrep_log_info "Using Ncat as streamer" tcmd="$tcmd -l" elif nc -h 2>&1 | grep -qw -F -- '-d'; then wsrep_log_info "Using Debian netcat as streamer" tcmd="$tcmd -dl" if [ $WSREP_SST_OPT_HOST_IPv6 -eq 1 ]; then # When host is not explicitly specified (when only the port # is specified) netcat can only bind to an IPv4 address if # the "-6" option is not explicitly specified: tcmd="$tcmd -6" fi else wsrep_log_info "Using traditional netcat as streamer" tcmd="$tcmd -l -p" fi tcmd="$tcmd $SST_PORT" else # Check to see if netcat supports the '-N' flag. # -N Shutdown the network socket after EOF on stdin # If it supports the '-N' flag, then we need to use the '-N' # flag, otherwise the transfer will stay open after the file # transfer and cause the command to timeout. # Older versions of netcat did not need this flag and will # return an error if the flag is used. if nc -h 2>&1 | grep -qw -F -- '-N'; then tcmd="$tcmd -N" wsrep_log_info "Using nc -N" fi # netcat doesn't understand [] around IPv6 address if nc -h 2>&1 | grep -q -F 'ncat'; then wsrep_log_info "Using Ncat as streamer" elif nc -h 2>&1 | grep -qw -F -- '-d'; then wsrep_log_info "Using Debian netcat as streamer" else wsrep_log_info "Using traditional netcat as streamer" tcmd="$tcmd -q0" fi tcmd="$tcmd $WSREP_SST_OPT_HOST_UNESCAPED $SST_PORT" fi else tfmt='socat' wsrep_log_info "Using socat as streamer" wsrep_check_programs socat if [ -n "$sockopt" ]; then sockopt=$(trim_string "$sockopt" ',') if [ -n "$sockopt" ]; then sockopt=",$sockopt" fi fi # Add an option for ipv6 if needed: if [ $WSREP_SST_OPT_HOST_IPv6 -eq 1 ]; then # If sockopt contains 'pf=ip6' somewhere in the middle, # this will not interfere with socat, but exclude the trivial # cases when sockopt contains 'pf=ip6' as prefix or suffix: if [ "$sockopt" = "${sockopt#,pf=ip6}" -a \ "$sockopt" = "${sockopt%,pf=ip6}" ] then sockopt=",pf=ip6$sockopt" fi fi if [ $encrypt -lt 2 ]; then if [ "$WSREP_SST_OPT_ROLE" = 'joiner' ]; then tcmd="socat -u TCP-LISTEN:$SST_PORT,reuseaddr$sockopt stdio" else tcmd="socat -u stdio TCP:$REMOTEIP:$SST_PORT$sockopt" fi return fi if ! socat -V | grep -q -F 'WITH_OPENSSL 1'; then wsrep_log_error "******** FATAL ERROR ************************************************ " wsrep_log_error "* Encryption requested, but socat is not OpenSSL enabled (encrypt=$encrypt) *" wsrep_log_error "********************************************************************* " exit 2 fi local action='Decrypting' if [ "$WSREP_SST_OPT_ROLE" = 'joiner' ]; then tcmd="socat -u openssl-listen:$SST_PORT,reuseaddr" else tcmd="socat -u stdio openssl-connect:$REMOTEIP:$SST_PORT" action='Encrypting' fi if [ "${sockopt#*,dhparam=}" != "$sockopt" ]; then if [ -z "$ssl_dhparams" ]; then # Determine the socat version SOCAT_VERSION=$(socat -V 2>&1 | grep -m1 -oe '[0-9]\.[0-9][\.0-9]*') if [ -z "$SOCAT_VERSION" ]; then wsrep_log_error "******** FATAL ERROR ******************" wsrep_log_error "* Cannot determine the socat version. *" wsrep_log_error "***************************************" exit 2 fi if ! check_for_version "$SOCAT_VERSION" '1.7.3'; then # socat versions < 1.7.3 will have 512-bit dhparams (too small) # so create 2048-bit dhparams and send that as a parameter: check_for_dhparams fi fi if [ -n "$ssl_dhparams" ]; then tcmd="$tcmd,dhparam='$ssl_dhparams'" fi fi CN_option=",commonname=''" if [ $encrypt -eq 2 ]; then wsrep_log_info \ "Using openssl based encryption with socat: with crt and pem" if [ -z "$tpem" -o -z "$tcert$tcap" ]; then wsrep_log_error \ "Both PEM file and CRT file (or path) are required" exit 22 fi verify_ca_matches_cert "$tpem" "$tcert" "$tcap" tcmd="$tcmd,cert='$tpem'" if [ -n "$tcert" ]; then tcmd="$tcmd,cafile='$tcert'" fi if [ -n "$tcap" ]; then tcmd="$tcmd,capath='$tcap'" fi stagemsg="$stagemsg-OpenSSL-Encrypted-2" wsrep_log_info "$action with cert='$tpem', ca='$tcert', capath='$tcap'" elif [ $encrypt -eq 3 -o $encrypt -eq 4 ]; then wsrep_log_info \ "Using openssl based encryption with socat: with key and crt" if [ -z "$tpem" -o -z "$tkey" ]; then wsrep_log_error "Both the certificate file (or path) and" \ "the key file are required" exit 22 fi verify_cert_matches_key "$tpem" "$tkey" stagemsg="$stagemsg-OpenSSL-Encrypted-3" if [ -z "$tcert$tcap" ]; then if [ $encrypt -eq 4 ]; then wsrep_log_error \ "Peer certificate file (or path) required if encrypt=4" exit 22 fi # no verification CN_option="" tcmd="$tcmd,cert='$tpem',key='$tkey',verify=0" wsrep_log_info \ "$action with cert='$tpem', key='$tkey', verify=0" else # CA verification verify_ca_matches_cert "$tpem" "$tcert" "$tcap" if [ -n "$WSREP_SST_OPT_REMOTE_USER" ]; then CN_option=",commonname='$WSREP_SST_OPT_REMOTE_USER'" elif [ "$WSREP_SST_OPT_ROLE" = 'joiner' -o $encrypt -eq 4 ] then CN_option=",commonname=''" elif is_local_ip "$WSREP_SST_OPT_HOST_UNESCAPED"; then CN_option=',commonname=localhost' else CN_option=",commonname='$WSREP_SST_OPT_HOST_UNESCAPED'" fi tcmd="$tcmd,cert='$tpem',key='$tkey'" if [ -n "$tcert" ]; then tcmd="$tcmd,cafile='$tcert'" fi if [ -n "$tcap" ]; then tcmd="$tcmd,capath='$tcap'" fi wsrep_log_info "$action with cert='$tpem', key='$tkey'," \ "ca='$tcert', capath='$tcap'" fi else wsrep_log_info "Unknown encryption mode: encrypt=$encrypt" exit 22 fi tcmd="$tcmd$CN_option$sockopt" if [ "$WSREP_SST_OPT_ROLE" = 'joiner' ]; then tcmd="$tcmd stdio" fi fi } get_footprint() { pushd "$WSREP_SST_OPT_DATA" 1>/dev/null payload=$(find . -regex '.*\.ibd$\|.*\.MYI$\|.*\.MYD$\|.*ibdata1$' \ -type f -print0 | du --files0-from=- --block-size=1 -c -s | \ awk 'END { print $1 }') if [ "$compress" != 'none' ]; then # QuickLZ has around 50% compression ratio # When compression/compaction used, the progress is only an approximate. payload=$(( payload*1/2 )) fi popd 1>/dev/null pcmd="$pcmd -s $payload" adjust_progress } adjust_progress() { if [ -z "$(commandex pv)" ]; then wsrep_log_error "pv not found in path: $PATH" wsrep_log_error "Disabling all progress/rate-limiting" pcmd="" rlimit="" progress="" return fi if [ -n "$progress" -a "$progress" != '1' ]; then if [ -e "$progress" ]; then pcmd="$pcmd 2>>'$progress'" else pcmd="$pcmd 2>'$progress'" fi elif [ -z "$progress" -a -n "$rlimit" ]; then # When rlimit is non-zero pcmd='pv -q' fi if [ -n "$rlimit" -a "$WSREP_SST_OPT_ROLE" = 'donor' ]; then wsrep_log_info "Rate-limiting SST to $rlimit" pcmd="$pcmd -L \$rlimit" fi } encgroups='--mysqld|sst|xtrabackup' read_cnf() { sfmt=$(parse_cnf sst streamfmt 'xbstream') tfmt=$(parse_cnf sst transferfmt 'socat') encrypt=$(parse_cnf "$encgroups" 'encrypt' 0) tmode=$(parse_cnf "$encgroups" 'ssl-mode' 'DISABLED' | \ tr [:lower:] [:upper:]) if [ $encrypt -eq 0 -o $encrypt -ge 2 ]; then if [ "$tmode" != 'DISABLED' -o $encrypt -ge 2 ]; then check_server_ssl_config fi if [ "$tmode" != 'DISABLED' ]; then if [ 0 -eq $encrypt -a -n "$tpem" -a -n "$tkey" ] then encrypt=3 # enable cert/key SSL encyption # avoid CA verification if not set explicitly: # nodes may happen to have different CA if self-generated, # zeroing up tcert and tcap does the trick: if [ "${tmode#VERIFY}" = "$tmode" ]; then tcert="" tcap="" fi fi fi elif [ $encrypt -eq 1 ]; then ealgo=$(parse_cnf "$encgroups" 'encrypt-algo') eformat=$(parse_cnf "$encgroups" 'encrypt-format' 'xbcrypt') ekey=$(parse_cnf "$encgroups" 'encrypt-key') # The keyfile should be read only when the key # is not specified or empty: if [ -z "$ekey" ]; then ekeyfile=$(parse_cnf "$encgroups" 'encrypt-key-file') fi fi wsrep_log_info "SSL configuration: CA='$tcert', CAPATH='$tcap'," \ "CERT='$tpem', KEY='$tkey', MODE='$tmode'," \ "encrypt='$encrypt'" sockopt=$(parse_cnf sst sockopt "") progress=$(parse_cnf sst progress "") rebuild=$(parse_cnf sst rebuild 0) ttime=$(parse_cnf sst time 0) cpat='.*\.pem$\|.*init\.ok$\|.*galera\.cache$\|.*sst_in_progress$\|.*\.sst$\|.*gvwstate\.dat$\|.*grastate\.dat$\|.*\.err$\|.*\.log$\|.*RPM_UPGRADE_MARKER$\|.*RPM_UPGRADE_HISTORY$' [ "$OS" = 'FreeBSD' ] && cpat=$(echo "$cpat" | sed 's/\\|/|/g') cpat=$(parse_cnf sst cpat "$cpat") scomp=$(parse_cnf sst compressor "") sdecomp=$(parse_cnf sst decompressor "") rlimit=$(parse_cnf sst rlimit "") uextra=$(parse_cnf sst use-extra 0) speciald=$(parse_cnf sst sst-special-dirs 1) iopts=$(parse_cnf sst inno-backup-opts "") iapts=$(parse_cnf sst inno-apply-opts "") impts=$(parse_cnf sst inno-move-opts "") stimeout=$(parse_cnf sst sst-initial-timeout 300) ssyslog=$(parse_cnf sst sst-syslog 0) ssystag=$(parse_cnf mysqld_safe syslog-tag "${SST_SYSLOG_TAG:-}") ssystag="$ssystag-" sstlogarchive=$(parse_cnf sst sst-log-archive 1) sstlogarchivedir=$(parse_cnf sst sst-log-archive-dir '/tmp/sst_log_archive') if [ $speciald -eq 0 ]; then wsrep_log_error \ "sst-special-dirs equal to 0 is not supported, falling back to 1" speciald=1 fi if [ $ssyslog -ne -1 ]; then ssyslog=$(in_config 'mysqld_safe' 'syslog') fi if [ "$WSREP_SST_OPT_ROLE" = 'donor' ]; then compress=$(parse_cnf "$encgroups" 'compress' 'none') if [ "$compress" != 'none' ]; then compress_chunk=$(parse_cnf "$encgroups" 'compress-chunk-size') compress_threads=$(parse_cnf "$encgroups" 'compress-threads') fi fi backup_threads=$(parse_cnf "$encgroups" 'backup-threads') if [ "$eformat" = 'xbcrypt' ]; then encrypt_threads=$(parse_cnf "$encgroups" 'encrypt-threads') encrypt_chunk=$(parse_cnf "$encgroups" 'encrypt-chunk-size') fi } get_stream() { if [ "$sfmt" = 'mbstream' -o "$sfmt" = 'xbstream' ]; then local STREAM_BIN=$(commandex "$sfmt") if [ -z "$STREAM_BIN" ]; then if [ "$sfmt" = 'xbstream' ]; then STREAM_BIN=$(commandex 'mbstream') else STREAM_BIN=$(commandex 'xbstream') fi fi if [ -z "$STREAM_BIN" ]; then wsrep_log_error "Streaming with $sfmt, but $sfmt not found in path" exit 42 fi if [ "$WSREP_SST_OPT_ROLE" = 'joiner' ]; then strmcmd="'$STREAM_BIN' -x" else strmcmd="'$STREAM_BIN' -c '$INFO_FILE'" fi else sfmt='tar' if [ "$WSREP_SST_OPT_ROLE" = 'joiner' ]; then strmcmd='tar xfi -' else strmcmd="tar cf - '$INFO_FILE'" fi fi wsrep_log_info "Streaming with $sfmt" } sig_joiner_cleanup() { local estatus=$? if [ $estatus -ne 0 ]; then wsrep_log_error "Cleanup after exit with status: $estatus" fi wsrep_log_error "Removing $MAGIC_FILE file due to signal" [ "$(pwd)" != "$OLD_PWD" ] && cd "$OLD_PWD" [ -f "$MAGIC_FILE" ] && rm -f "$MAGIC_FILE" exit $estatus } cleanup_at_exit() { # Since this is invoked just after exit NNN local estatus=$? if [ $estatus -ne 0 ]; then wsrep_log_error "Cleanup after exit with status: $estatus" fi [ "$(pwd)" != "$OLD_PWD" ] && cd "$OLD_PWD" if [ "$WSREP_SST_OPT_ROLE" = 'joiner' ]; then wsrep_log_info "Removing the sst_in_progress file" wsrep_cleanup_progress_file else if [ -n "$BACKUP_PID" ]; then if check_pid "$BACKUP_PID" 1; then wsrep_log_error \ "innobackupex process is still running. Killing..." cleanup_pid $CHECK_PID "$BACKUP_PID" fi fi [ -f "$DATA/$IST_FILE" ] && rm -f "$DATA/$IST_FILE" || : fi if [ -n "$progress" -a -p "$progress" ]; then wsrep_log_info "Cleaning up fifo file: $progress" rm -f "$progress" || : fi wsrep_log_info "Cleaning up temporary directories" if [ "$WSREP_SST_OPT_ROLE" = 'joiner' ]; then [ -n "$STATDIR" -a -d "$STATDIR" ] && rm -rf "$STATDIR" || : else [ -n "$xtmpdir" -a -d "$xtmpdir" ] && rm -rf "$xtmpdir" || : [ -n "$itmpdir" -a -d "$itmpdir" ] && rm -rf "$itmpdir" || : fi # Final cleanup pgid=$(ps -o pgid= $$ 2>/dev/null | grep -o -E '[0-9]*' || :) # This means no setsid done in mysqld. # We don't want to kill mysqld here otherwise. if [ -n "$pgid" ]; then if [ $$ -eq $pgid ]; then # This means a signal was delivered to the process. # So, more cleanup. if [ $estatus -ge 128 ]; then kill -KILL -- -$$ || : fi fi fi if [ -n "${SST_PID:-}" ]; then [ -f "$SST_PID" ] && rm -f "$SST_PID" || : fi exit $estatus } setup_ports() { SST_PORT="$WSREP_SST_OPT_PORT" if [ "$WSREP_SST_OPT_ROLE" = 'donor' ]; then REMOTEIP="$WSREP_SST_OPT_HOST" lsn="$WSREP_SST_OPT_LSN" sst_ver="$WSREP_SST_OPT_SST_VER" fi } # # Waits ~30 seconds for socat or nc to open the port and # then reports ready, regardless of timeout. # wait_for_listen() { local PORT="$1" local ADDR="$2" local MODULE="$3" for i in {1..150}; do if check_port "" "$PORT" 'socat|nc'; then break fi sleep 0.2 done echo "ready $ADDR/$MODULE//$sst_ver" } check_extra() { local use_socket=1 if [ $uextra -eq 1 ]; then local thread_handling=$(parse_cnf '--mysqld' 'thread-handling') if [ "$thread_handling" = 'pool-of-threads' ]; then local eport=$(parse_cnf '--mysqld' 'extra-port') if [ -n "$eport" ]; then # Xtrabackup works only locally. # Hence, setting host to 127.0.0.1 unconditionally: wsrep_log_info "SST through extra_port $eport" INNOEXTRA="$INNOEXTRA --host=127.0.0.1 --port=$eport" use_socket=0 else wsrep_log_error "Extra port $eport null, failing" exit 1 fi else wsrep_log_info "Thread pool not set, ignore the option use_extra" fi fi if [ $use_socket -eq 1 -a -n "$WSREP_SST_OPT_SOCKET" ]; then INNOEXTRA="$INNOEXTRA --socket='$WSREP_SST_OPT_SOCKET'" fi } recv_joiner() { local dir="$1" local msg="$2" local tmt=$3 local checkf=$4 local wait=$5 if [ ! -d "$dir" ]; then # This indicates that IST is in progress return fi local ltcmd="$tcmd" if [ $tmt -gt 0 ]; then if [ -n "$(commandex timeout)" ]; then if timeout --help | grep -qw -F -- '-k'; then ltcmd="timeout -k $(( tmt+10 )) $tmt $tcmd" else ltcmd="timeout -s9 $tmt $tcmd" fi fi fi pushd "$dir" 1>/dev/null set +e if [ $wait -ne 0 ]; then wait_for_listen "$SST_PORT" "$ADDR" "$MODULE" & fi timeit "$msg" "$ltcmd | $strmcmd; RC=( "\${PIPESTATUS[@]}" )" set -e popd 1>/dev/null if [ ${RC[0]} -eq 124 ]; then wsrep_log_error "Possible timeout in receiving first data from" \ "donor in gtid stage: exit codes: ${RC[@]}" exit 32 fi for ecode in "${RC[@]}"; do if [ $ecode -ne 0 ]; then wsrep_log_error "Error while getting data from donor node:" \ "exit codes: ${RC[@]}" exit 32 fi done if [ $checkf -eq 1 ]; then if [ ! -r "$MAGIC_FILE" ]; then # this message should cause joiner to abort wsrep_log_error "receiving process ended without creating" \ "'$MAGIC_FILE'" wsrep_log_info "Contents of datadir" wsrep_log_info $(ls -l "$dir/"*) exit 32 fi # check donor supplied secret SECRET=$(grep -F -- "$SECRET_TAG " "$MAGIC_FILE" 2>/dev/null | \ cut -d ' ' -f 2) if [ "$SECRET" != "$MY_SECRET" ]; then wsrep_log_error "Donor does not know my secret!" wsrep_log_info "Donor: '$SECRET', my: '$MY_SECRET'" exit 32 fi # remove secret from the magic file grep -v -F -- "$SECRET_TAG " "$MAGIC_FILE" > "$MAGIC_FILE.new" mv "$MAGIC_FILE.new" "$MAGIC_FILE" fi } send_donor() { local dir="$1" local msg="$2" pushd "$dir" 1>/dev/null set +e timeit "$msg" "$strmcmd | $tcmd; RC=( "\${PIPESTATUS[@]}" )" set -e popd 1>/dev/null for ecode in "${RC[@]}"; do if [ $ecode -ne 0 ]; then wsrep_log_error "Error while sending data to joiner node:" \ "exit codes: ${RC[@]}" exit 32 fi done } monitor_process() { local sst_stream_pid=$1 while true ; do if ! ps -p "$WSREP_SST_OPT_PARENT" >/dev/null 2>&1; then wsrep_log_error \ "Parent mysqld process (PID: $WSREP_SST_OPT_PARENT)" \ "terminated unexpectedly." kill -- -"$WSREP_SST_OPT_PARENT" exit 32 fi if ! ps -p "$sst_stream_pid" >/dev/null 2>&1; then break fi sleep 0.1 done } # check the version, we require XB-2.3.5 to ensure that we can pass the # datadir via the command-line option XB_REQUIRED_VERSION='2.3.5' XB_VERSION=$($BACKUP_BIN --version 2>&1 | \ grep -oe '[0-9]\.[0-9][\.0-9]*' | head -n1) if [ -z "$XB_VERSION" ]; then wsrep_log_error "FATAL: Cannot determine the $BACKUP_BIN version." \ "Needs xtrabackup-$XB_REQUIRED_VERSION or higher to" \ "perform SST" exit 2 fi if ! check_for_version "$XB_VERSION" "$XB_REQUIRED_VERSION"; then wsrep_log_error "FATAL: The $BACKUP_BIN version is $XB_VERSION." \ "Needs xtrabackup-$XB_REQUIRED_VERSION or higher to" \ "perform SST" exit 2 fi [ -f "$MAGIC_FILE" ] && rm -f "$MAGIC_FILE" if [ "$WSREP_SST_OPT_ROLE" != 'joiner' -a \ "$WSREP_SST_OPT_ROLE" != 'donor' ] then wsrep_log_error "Invalid role '$WSREP_SST_OPT_ROLE'" exit 22 fi read_cnf setup_ports if "$BACKUP_BIN" --help 2>/dev/null | grep -qw -F -- '--version-check'; then disver=' --no-version-check' fi OLD_PWD="$(pwd)" if [ -n "$DATA" -a "$DATA" != '.' ]; then [ ! -d "$DATA" ] && mkdir -p "$DATA" cd "$DATA" fi DATA_DIR="$(pwd -P)" cd "$OLD_PWD" if [ $ssyslog -eq 1 ]; then if [ -n "$(commandex logger)" ]; then wsrep_log_info "Logging all stderr of SST/xtrabackup to syslog" exec 2> >(logger -p daemon.err -t ${ssystag}wsrep-sst-$WSREP_SST_OPT_ROLE) wsrep_log_error() { logger -p daemon.err -t ${ssystag}wsrep-sst-$WSREP_SST_OPT_ROLE "$@" } wsrep_log_info() { logger -p daemon.info -t ${ssystag}wsrep-sst-$WSREP_SST_OPT_ROLE "$@" } else wsrep_log_error "logger not in path: $PATH. Ignoring" fi INNOAPPLY="2>&1 | logger -p daemon.err -t ${ssystag}innobackupex-apply" INNOMOVE="2>&1 | logger -p daemon.err -t ${ssystag}innobackupex-move" INNOBACKUP="2> >(logger -p daemon.err -t ${ssystag}innobackupex-backup)" else if [ $sstlogarchive -eq 1 ] then ARCHIVETIMESTAMP=$(date '+%Y.%m.%d-%H.%M.%S.%N') if [ -n "$sstlogarchivedir" ]; then if [ ! -d "$sstlogarchivedir" ]; then mkdir -p "$sstlogarchivedir" fi fi if [ -e "$INNOAPPLYLOG" ]; then if [ -n "$sstlogarchivedir" ]; then newfile=$(basename "$INNOAPPLYLOG") newfile="$sstlogarchivedir/$newfile.$ARCHIVETIMESTAMP" else newfile="$INNOAPPLYLOG.$ARCHIVETIMESTAMP" fi wsrep_log_info "Moving '$INNOAPPLYLOG' to '$newfile'" mv "$INNOAPPLYLOG" "$newfile" gzip "$newfile" fi if [ -e "$INNOMOVELOG" ]; then if [ -n "$sstlogarchivedir" ]; then newfile=$(basename "$INNOMOVELOG") newfile="$sstlogarchivedir/$newfile.$ARCHIVETIMESTAMP" else newfile="$INNOMOVELOG.$ARCHIVETIMESTAMP" fi wsrep_log_info "Moving '$INNOMOVELOG' to '$newfile'" mv "$INNOMOVELOG" "$newfile" gzip "$newfile" fi if [ -e "$INNOBACKUPLOG" ]; then if [ -n "$sstlogarchivedir" ]; then newfile=$(basename "$INNOBACKUPLOG") newfile="$sstlogarchivedir/$newfile.$ARCHIVETIMESTAMP" else newfile="$INNOBACKUPLOG.$ARCHIVETIMESTAMP" fi wsrep_log_info "Moving '$INNOBACKUPLOG' to '$newfile'" mv "$INNOBACKUPLOG" "$newfile" gzip "$newfile" fi fi INNOAPPLY="> '$INNOAPPLYLOG' 2>&1" INNOMOVE="> '$INNOMOVELOG' 2>&1" INNOBACKUP="2> '$INNOBACKUPLOG'" fi setup_commands() { local recovery="" if [ -n "$INNODB_FORCE_RECOVERY" ]; then recovery=" --innodb-force-recovery=$INNODB_FORCE_RECOVERY" fi INNOAPPLY="$BACKUP_BIN$disver$recovery${iapts:+ }$iapts$INNOEXTRA --apply-log${rebuildcmd:+ }$rebuildcmd --datadir='$DATA' '$DATA' $INNOAPPLY" INNOMOVE="$BACKUP_BIN$WSREP_SST_OPT_CONF --move-back$disver${impts:+ }$impts --force-non-empty-directories --datadir='${TDATA:-$DATA}' '$DATA' $INNOMOVE" local sfmt_work="$sfmt" if [ "$sfmt" = 'mbstream' ]; then sfmt_work='xbstream' fi INNOBACKUP="$BACKUP_BIN$WSREP_SST_OPT_CONF$disver${iopts:+ }$iopts$tmpopts$INNOEXTRA --galera-info --stream=$sfmt_work --datadir='$DATA' '$itmpdir' $INNOBACKUP" } get_stream get_transfer if [ "$WSREP_SST_OPT_ROLE" = 'donor' ] then trap cleanup_at_exit EXIT if [ $WSREP_SST_OPT_BYPASS -eq 0 ] then if [ -z "$sst_ver" ]; then wsrep_log_error "Upgrade joiner to 5.6.21 or higher for backup locks support" wsrep_log_error "The joiner is not supported for this version of donor" exit 93 fi tmpdir=$(parse_cnf "$encgroups" 'tmpdir') if [ -z "$tmpdir" ]; then xtmpdir="$(mktemp -d)" elif [ "$OS" = 'Linux' ]; then xtmpdir=$(mktemp '-d' "--tmpdir=$tmpdir") else xtmpdir=$(TMPDIR="$tmpdir"; mktemp '-d') fi wsrep_log_info "Using '$xtmpdir' as xtrabackup temporary directory" tmpopts=" --tmpdir='$xtmpdir'" itmpdir="$(mktemp -d)" wsrep_log_info "Using '$itmpdir' as xtrabackup working directory" usrst=0 if [ -n "$WSREP_SST_OPT_USER" ]; then INNOEXTRA="$INNOEXTRA --user='$WSREP_SST_OPT_USER'" usrst=1 fi if [ -n "$WSREP_SST_OPT_PSWD" ]; then INNOEXTRA="$INNOEXTRA --password='$WSREP_SST_OPT_PSWD'" elif [ $usrst -eq 1 ]; then # Empty password, used for testing, debugging etc. INNOEXTRA="$INNOEXTRA --password=" fi check_extra wsrep_log_info "Streaming GTID file before SST" # Store donor's wsrep GTID (state ID) and wsrep_gtid_domain_id # (separated by a space). echo "$WSREP_SST_OPT_GTID $WSREP_SST_OPT_GTID_DOMAIN_ID" > "$MAGIC_FILE" if [ -n "$WSREP_SST_OPT_REMOTE_PSWD" ]; then # Let joiner know that we know its secret echo "$SECRET_TAG $WSREP_SST_OPT_REMOTE_PSWD" >> "$MAGIC_FILE" fi ttcmd="$tcmd" if [ -n "$scomp" ]; then tcmd="$scomp | $tcmd" fi get_keys if [ $encrypt -eq 1 ]; then tcmd="$ecmd | $tcmd" fi send_donor "$DATA" "$stagemsg-gtid" # Restore the transport commmand to its original state tcmd="$ttcmd" if [ -n "$progress" ]; then get_footprint tcmd="$pcmd | $tcmd" elif [ -n "$rlimit" ]; then adjust_progress tcmd="$pcmd | $tcmd" fi wsrep_log_info "Sleeping before data transfer for SST" sleep 10 wsrep_log_info "Streaming the backup to joiner at $REMOTEIP:$SST_PORT" # Add compression to the head of the stream (if specified) if [ -n "$scomp" ]; then tcmd="$scomp | $tcmd" fi # Add encryption to the head of the stream (if specified) if [ $encrypt -eq 1 ]; then tcmd="$ecmd | $tcmd" fi iopts="--databases-exclude='lost+found'${iopts:+ }$iopts" if [ ${FORCE_FTWRL:-0} -eq 1 ]; then wsrep_log_info "Forcing FTWRL due to environment variable" \ "FORCE_FTWRL equal to $FORCE_FTWRL" iopts="--no-backup-locks${iopts:+ }$iopts" fi # if compression is enabled for backup files, then add the # appropriate options to the innobackupex command line: if [ "$compress" != 'none' ]; then iopts="--compress${compress:+=$compress}${iopts:+ }$iopts" if [ -n "$compress_threads" ]; then iopts="--compress-threads=$compress_threads${iopts:+ }$iopts" fi if [ -n "$compress_chunk" ]; then iopts="--compress-chunk-size=$compress_chunk${iopts:+ }$iopts" fi fi if [ -n "$backup_threads" ]; then iopts="--parallel=$backup_threads${iopts:+ }$iopts" fi setup_commands set +e timeit "$stagemsg-SST" "$INNOBACKUP | $tcmd; RC=( "\${PIPESTATUS[@]}" )" set -e if [ ${RC[0]} -ne 0 ]; then wsrep_log_error "innobackupex finished with error: ${RC[0]}." \ "Check syslog or '$INNOBACKUPLOG' for details" exit 22 elif [ ${RC[$(( ${#RC[@]}-1 ))]} -eq 1 ]; then wsrep_log_error "$tcmd finished with error: ${RC[1]}" exit 22 fi # innobackupex implicitly writes PID to fixed location in $xtmpdir BACKUP_PID="$xtmpdir/xtrabackup_pid" else # BYPASS FOR IST wsrep_log_info "Bypassing the SST for IST" echo "continue" # now server can resume updating data # Store donor's wsrep GTID (state ID) and wsrep_gtid_domain_id # (separated by a space). echo "$WSREP_SST_OPT_GTID $WSREP_SST_OPT_GTID_DOMAIN_ID" > "$MAGIC_FILE" echo "1" > "$DATA/$IST_FILE" if [ -n "$scomp" ]; then tcmd="$scomp | $tcmd" fi get_keys if [ $encrypt -eq 1 ]; then tcmd="$ecmd | $tcmd" fi strmcmd="$strmcmd '$IST_FILE'" send_donor "$DATA" "$stagemsg-IST" fi echo "done $WSREP_SST_OPT_GTID" wsrep_log_info "Total time on donor: $totime seconds" elif [ "$WSREP_SST_OPT_ROLE" = 'joiner' ] then [ -e "$SST_PROGRESS_FILE" ] && \ wsrep_log_info "Stale sst_in_progress file: $SST_PROGRESS_FILE" [ -n "$SST_PROGRESS_FILE" ] && touch "$SST_PROGRESS_FILE" # if no command line argument and INNODB_DATA_HOME_DIR environment # variable is not set, try to get it from the my.cnf: if [ -z "$INNODB_DATA_HOME_DIR" ]; then INNODB_DATA_HOME_DIR=$(parse_cnf '--mysqld' 'innodb-data-home-dir') INNODB_DATA_HOME_DIR=$(trim_dir "$INNODB_DATA_HOME_DIR") fi if [ -n "$INNODB_DATA_HOME_DIR" -a "$INNODB_DATA_HOME_DIR" != '.' ]; then # handle both relative and absolute paths: cd "$DATA" [ ! -d "$INNODB_DATA_HOME_DIR" ] && mkdir -p "$INNODB_DATA_HOME_DIR" cd "$INNODB_DATA_HOME_DIR" ib_home_dir="$(pwd -P)" cd "$OLD_PWD" fi # if no command line argument and INNODB_LOG_GROUP_HOME is not set, # then try to get it from the my.cnf: if [ -z "$INNODB_LOG_GROUP_HOME" ]; then INNODB_LOG_GROUP_HOME=$(parse_cnf '--mysqld' 'innodb-log-group-home-dir') INNODB_LOG_GROUP_HOME=$(trim_dir "$INNODB_LOG_GROUP_HOME") fi if [ -n "$INNODB_LOG_GROUP_HOME" -a "$INNODB_LOG_GROUP_HOME" != '.' ]; then # handle both relative and absolute paths: cd "$DATA" [ ! -d "$INNODB_LOG_GROUP_HOME" ] && mkdir -p "$INNODB_LOG_GROUP_HOME" cd "$INNODB_LOG_GROUP_HOME" ib_log_dir="$(pwd -P)" cd "$OLD_PWD" fi # if no command line argument and INNODB_UNDO_DIR is not set, # then try to get it from the my.cnf: if [ -z "$INNODB_UNDO_DIR" ]; then INNODB_UNDO_DIR=$(parse_cnf '--mysqld' 'innodb-undo-directory') INNODB_UNDO_DIR=$(trim_dir "$INNODB_UNDO_DIR") fi if [ -n "$INNODB_UNDO_DIR" -a "$INNODB_UNDO_DIR" != '.' ]; then # handle both relative and absolute paths: cd "$DATA" [ ! -d "$INNODB_UNDO_DIR" ] && mkdir -p "$INNODB_UNDO_DIR" cd "$INNODB_UNDO_DIR" ib_undo_dir="$(pwd -P)" cd "$OLD_PWD" fi if [ -n "$backup_threads" ]; then impts="--parallel=$backup_threads${impts:+ }$impts" fi SST_PID="$WSREP_SST_OPT_DATA/wsrep_sst.pid" # give some time for previous SST to complete: check_round=0 while check_pid "$SST_PID" 0; do wsrep_log_info "previous SST is not completed, waiting for it to exit" check_round=$(( check_round + 1 )) if [ $check_round -eq 10 ]; then wsrep_log_error "previous SST script still running." exit 114 # EALREADY fi sleep 1 done echo $$ > "$SST_PID" stagemsg='Joiner-Recv' MODULE='xtrabackup_sst' [ -f "$DATA/$IST_FILE" ] && rm -f "$DATA/$IST_FILE" # May need xtrabackup_checkpoints later on [ -f "$DATA/xtrabackup_binary" ] && rm -f "$DATA/xtrabackup_binary" [ -f "$DATA/xtrabackup_galera_info" ] && rm -f "$DATA/xtrabackup_galera_info" [ -f "$DATA/ib_logfile0" ] && rm -f "$DATA/ib_logfile0" ADDR="$WSREP_SST_OPT_ADDR" if [ "${tmode#VERIFY}" != "$tmode" ]; then # backward-incompatible behavior: CN="" if [ -n "$tpem" ]; then # find out my Common Name get_openssl if [ -z "$OPENSSL_BINARY" ]; then wsrep_log_error \ 'openssl not found but it is required for authentication' exit 42 fi CN=$("$OPENSSL_BINARY" x509 -noout -subject -in "$tpem" | \ tr ',' '\n' | grep -F 'CN =' | cut -d= -f2 | sed s/^\ // | \ sed s/\ %//) fi MY_SECRET="$(wsrep_gen_secret)" # Add authentication data to address ADDR="$CN:$MY_SECRET@$ADDR" else MY_SECRET="" # for check down in recv_joiner() fi trap sig_joiner_cleanup HUP PIPE INT TERM trap cleanup_at_exit EXIT if [ -n "$progress" ]; then adjust_progress tcmd="$tcmd | $pcmd" fi get_keys if [ $encrypt -eq 1 ]; then strmcmd="$ecmd | $strmcmd" fi if [ -n "$sdecomp" ]; then strmcmd="$sdecomp | $strmcmd" fi check_sockets_utils STATDIR="$(mktemp -d)" MAGIC_FILE="$STATDIR/$INFO_FILE" recv_joiner "$STATDIR" "$stagemsg-gtid" $stimeout 1 1 if ! ps -p "$WSREP_SST_OPT_PARENT" >/dev/null 2>&1 then wsrep_log_error "Parent mysqld process (PID: $WSREP_SST_OPT_PARENT)" \ "terminated unexpectedly." exit 32 fi if [ ! -r "$STATDIR/$IST_FILE" ]; then if [ -d "$DATA/.sst" ]; then wsrep_log_info \ "WARNING: Stale temporary SST directory:" \ "'$DATA/.sst' from previous state transfer, removing..." rm -rf "$DATA/.sst" fi mkdir -p "$DATA/.sst" (recv_joiner "$DATA/.sst" "$stagemsg-SST" 0 0 0) & jpid=$! wsrep_log_info "Proceeding with SST" wsrep_log_info \ "Cleaning the existing datadir and innodb-data/log directories" if [ "$OS" = 'FreeBSD' ]; then find -E ${ib_home_dir:+"$ib_home_dir"} \ ${ib_undo_dir:+"$ib_undo_dir"} \ ${ib_log_dir:+"$ib_log_dir"} \ "$DATA" -mindepth 1 -prune -regex "$cpat" \ -o -exec rm -rfv {} 1>&2 \+ else find ${ib_home_dir:+"$ib_home_dir"} \ ${ib_undo_dir:+"$ib_undo_dir"} \ ${ib_log_dir:+"$ib_log_dir"} \ "$DATA" -mindepth 1 -prune -regex "$cpat" \ -o -exec rm -rfv {} 1>&2 \+ fi get_binlog if [ -n "$WSREP_SST_OPT_BINLOG" ]; then binlog_dir=$(dirname "$WSREP_SST_OPT_BINLOG") binlog_base=$(basename "$WSREP_SST_OPT_BINLOG") binlog_index="$WSREP_SST_OPT_BINLOG_INDEX" binlog_explicit=0 if [ -n "$binlog_dir" -a "$binlog_dir" != '.' ]; then binlog_explicit=1 if [ -d "$binlog_dir" ]; then cd "$binlog_dir" wsrep_log_info \ "Cleaning the binlog directory $binlog_dir as well" # If there is a file with binlogs state, delete it: if [ -f "$binlog_base.state" ]; then rm -fv "$binlog_base.state" 1>&2 fi # Clean up the old binlog files and index: if [ -f "$binlog_index" ]; then binlogs=$(cat "$binlog_index") rm -fv "$binlog_index" 1>&2 cd "$DATA_DIR" echo "$binlogs" | \ while read bin_file || [ -n "$bin_file" ]; do rm -fv "$bin_file" 1>&2 || : done else rm -fv "$binlog_base".[0-9]* 1>&2 || : fi fi fi cd "$OLD_PWD" fi TDATA="$DATA" DATA="$DATA/.sst" MAGIC_FILE="$DATA/$INFO_FILE" wsrep_log_info "Waiting for SST streaming to complete!" monitor_process $jpid if [ ! -s "$DATA/xtrabackup_checkpoints" ]; then wsrep_log_error "xtrabackup_checkpoints missing," \ "failed xtrabackup/SST on donor" exit 2 fi # Rebuild indexes for compact backups if grep -qw -F 'compact = 1' "$DATA/xtrabackup_checkpoints"; then wsrep_log_info "Index compaction detected" get_proc nthreads=$(parse_cnf "$encgroups" 'rebuild-threads' $nproc) wsrep_log_info "Rebuilding during prepare with $nthreads threads" rebuildcmd="--rebuild-indexes --rebuild-threads=$nthreads" fi qpfiles=$(find "$DATA" -maxdepth 1 -type f -name '*.qp' -print -quit) if [ -n "$qpfiles" ]; then wsrep_log_info "Compressed qpress files found" if [ -z "$(commandex qpress)" ]; then wsrep_log_error "qpress utility not found in the path" exit 22 fi get_proc dcmd="xargs -n 2 qpress -dT$nproc" if [ -n "$progress" ] && \ pv --help | grep -qw -F -- '--line-mode' then count=$(find "$DATA" -type f -name '*.qp' | wc -l) count=$(( count*2 )) pvopts="-f -s $count -l -N Decompression" if pv --help | grep -qw -F -- '-F'; then pvopts="$pvopts -F '%N => Rate:%r Elapsed:%t %e Progress: [%b/$count]'" fi pcmd="pv $pvopts" adjust_progress dcmd="$pcmd | $dcmd" fi # Decompress the qpress files wsrep_log_info "Decompression with $nproc threads" timeit 'Joiner-Decompression' \ "find '$DATA' -type f -name '*.qp' -printf '%p\n%h\n' | \ $dcmd" extcode=$? if [ $extcode -eq 0 ]; then wsrep_log_info "Removing qpress files after decompression" find "$DATA" -type f -name '*.qp' -delete if [ $? -ne 0 ]; then wsrep_log_error \ "Something went wrong with deletion of qpress files." \ "Investigate" fi else wsrep_log_error "Decompression failed. Exit code: $extcode" exit 22 fi fi if [ -n "$WSREP_SST_OPT_BINLOG" ]; then cd "$DATA" binlogs="" if [ -f 'xtrabackup_binlog_info' ]; then NL=$'\n' while read bin_string || [ -n "$bin_string" ]; do bin_file=$(echo "$bin_string" | cut -f1) if [ -f "$bin_file" ]; then binlogs="$binlogs${binlogs:+$NL}$bin_file" fi done < 'xtrabackup_binlog_info' else binlogs=$(ls -d -1 "$binlog_base".[0-9]* 2>/dev/null || :) fi if [ -n "$binlogs" ]; then cd "$DATA_DIR" if [ $binlog_explicit -ne 0 ]; then [ ! -d "$binlog_dir" ] && mkdir -p "$binlog_dir" cd "$binlog_dir" fi echo "$binlogs" | \ while read bin_file || [ -n "$bin_file" ]; do echo "$binlog_dir${binlog_dir:+/}$bin_file" >> "$binlog_index" done fi cd "$OLD_PWD" fi wsrep_log_info "Preparing the backup at $DATA" setup_commands timeit 'Xtrabackup prepare stage' "$INNOAPPLY" if [ $? -ne 0 ]; then wsrep_log_error "xtrabackup apply finished with errors." \ "Check syslog or '$INNOAPPLYLOG' for details." exit 22 fi MAGIC_FILE="$TDATA/$INFO_FILE" wsrep_log_info "Moving the backup to $TDATA" timeit 'Xtrabackup move stage' "$INNOMOVE" if [ $? -eq 0 ]; then wsrep_log_info "Move successful, removing $DATA" rm -rf "$DATA" DATA="$TDATA" else wsrep_log_error "Move failed, keeping '$DATA' for further diagnosis" wsrep_log_error "Check syslog or '$INNOMOVELOG' for details" exit 22 fi else wsrep_log_info "'$IST_FILE' received from donor: Running IST" fi if [ ! -r "$MAGIC_FILE" ]; then wsrep_log_error "SST magic file '$MAGIC_FILE' not found/readable" exit 2 fi coords=$(cat "$MAGIC_FILE") wsrep_log_info "Galera co-ords from recovery: $coords" cat "$MAGIC_FILE" # Output : UUID:seqno wsrep_gtid_domain_id wsrep_log_info "Total time on joiner: $totime seconds" fi exit 0