/* Copyright (C) 2000-2004 MySQL AB This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef MYSQL_CLIENT #ifdef USE_PRAGMA_IMPLEMENTATION #pragma implementation // gcc: Class implementation #endif #include "mysql_priv.h" #include "slave.h" #include #endif /* MYSQL_CLIENT */ #define log_cs &my_charset_latin1 /* pretty_print_str() */ #ifdef MYSQL_CLIENT static void pretty_print_str(FILE* file, char* str, int len) { char* end = str + len; fputc('\'', file); while (str < end) { char c; switch ((c=*str++)) { case '\n': fprintf(file, "\\n"); break; case '\r': fprintf(file, "\\r"); break; case '\\': fprintf(file, "\\\\"); break; case '\b': fprintf(file, "\\b"); break; case '\t': fprintf(file, "\\t"); break; case '\'': fprintf(file, "\\'"); break; case 0 : fprintf(file, "\\0"); break; default: fputc(c, file); break; } } fputc('\'', file); } #endif /* MYSQL_CLIENT */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) static void clear_all_errors(THD *thd, struct st_relay_log_info *rli) { thd->query_error = 0; thd->clear_error(); *rli->last_slave_error = 0; rli->last_slave_errno = 0; } /* Ignore error code specified on command line */ inline int ignored_error_code(int err_code) { return ((err_code == ER_SLAVE_IGNORED_TABLE) || (use_slave_mask && bitmap_is_set(&slave_error_mask, err_code))); } #endif /* pretty_print_str() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) static char *pretty_print_str(char *packet, char *str, int len) { char *end= str + len; char *pos= packet; *pos++= '\''; while (str < end) { char c; switch ((c=*str++)) { case '\n': *pos++= '\\'; *pos++= 'n'; break; case '\r': *pos++= '\\'; *pos++= 'r'; break; case '\\': *pos++= '\\'; *pos++= '\\'; break; case '\b': *pos++= '\\'; *pos++= 'b'; break; case '\t': *pos++= '\\'; *pos++= 't'; break; case '\'': *pos++= '\\'; *pos++= '\''; break; case 0 : *pos++= '\\'; *pos++= '0'; break; default: *pos++= c; break; } } *pos++= '\''; return pos; } #endif /* !MYSQL_CLIENT */ /* Creates a temporary name for load data infile: SYNOPSIS slave_load_file_stem() buf Store new filename here file_id File_id (part of file name) event_server_id Event_id (part of file name) ext Extension for file name RETURN Pointer to start of extension */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) static char *slave_load_file_stem(char *buf, uint file_id, int event_server_id, const char *ext) { char *res; fn_format(buf,"SQL_LOAD-",slave_load_tmpdir, "", MY_UNPACK_FILENAME); to_unix_path(buf); buf = strend(buf); buf = int10_to_str(::server_id, buf, 10); *buf++ = '-'; buf = int10_to_str(event_server_id, buf, 10); *buf++ = '-'; res= int10_to_str(file_id, buf, 10); strmov(res, ext); // Add extension last return res; // Pointer to extension } #endif /* Delete all temporary files used for SQL_LOAD. SYNOPSIS cleanup_load_tmpdir() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) static void cleanup_load_tmpdir() { MY_DIR *dirp; FILEINFO *file; uint i; char fname[FN_REFLEN], prefbuf[31], *p; if (!(dirp=my_dir(slave_load_tmpdir,MYF(MY_WME)))) return; /* When we are deleting temporary files, we should only remove the files associated with the server id of our server. We don't use event_server_id here because since we've disabled direct binlogging of Create_file/Append_file/Exec_load events we cannot meet Start_log event in the middle of events from one LOAD DATA. */ p= strmake(prefbuf, STRING_WITH_LEN("SQL_LOAD-")); p= int10_to_str(::server_id, p, 10); *(p++)= '-'; *p= 0; for (i=0 ; i < (uint)dirp->number_off_files; i++) { file=dirp->dir_entry+i; if (is_prefix(file->name, prefbuf)) { fn_format(fname,file->name,slave_load_tmpdir,"",MY_UNPACK_FILENAME); my_delete(fname, MYF(0)); } } my_dirend(dirp); } #endif /* write_str() */ static bool write_str(IO_CACHE *file, char *str, uint length) { byte tmp[1]; tmp[0]= (byte) length; return (my_b_safe_write(file, tmp, sizeof(tmp)) || my_b_safe_write(file, (byte*) str, length)); } /* read_str() */ static inline int read_str(char **buf, char *buf_end, char **str, uint8 *len) { if (*buf + ((uint) (uchar) **buf) >= buf_end) return 1; *len= (uint8) **buf; *str= (*buf)+1; (*buf)+= (uint) *len+1; return 0; } /* Transforms a string into "" or its expression in 0x... form. */ char *str_to_hex(char *to, const char *from, uint len) { if (len) { *to++= '0'; *to++= 'x'; to= octet2hex(to, from, len); } else to= strmov(to, "\"\""); return to; // pointer to end 0 of 'to' } /* Append a version of the 'from' string suitable for use in a query to the 'to' string. To generate a correct escaping, the character set information in 'csinfo' is used. */ #ifndef MYSQL_CLIENT int append_query_string(CHARSET_INFO *csinfo, String const *from, String *to) { char *beg, *ptr; uint32 const orig_len= to->length(); if (to->reserve(orig_len + from->length()*2+3)) return 1; beg= to->c_ptr_quick() + to->length(); ptr= beg; if (csinfo->escape_with_backslash_is_dangerous) ptr= str_to_hex(ptr, from->ptr(), from->length()); else { *ptr++= '\''; ptr+= escape_string_for_mysql(from->charset(), ptr, 0, from->ptr(), from->length()); *ptr++='\''; } to->length(orig_len + ptr - beg); return 0; } #endif /* Prints a "session_var=value" string. Used by mysqlbinlog to print some SET commands just before it prints a query. */ static void print_set_option(FILE* file, uint32 bits_changed, uint32 option, uint32 flags, const char* name, bool* need_comma) { if (bits_changed & option) { if (*need_comma) fprintf(file,", "); fprintf(file,"%s=%d", name, test(flags & option)); *need_comma= 1; } } /************************************************************************** Log_event methods (= the parent class of all events) **************************************************************************/ /* Log_event::get_type_str() */ const char* Log_event::get_type_str() { switch(get_type_code()) { case START_EVENT_V3: return "Start_v3"; case STOP_EVENT: return "Stop"; case QUERY_EVENT: return "Query"; case ROTATE_EVENT: return "Rotate"; case INTVAR_EVENT: return "Intvar"; case LOAD_EVENT: return "Load"; case NEW_LOAD_EVENT: return "New_load"; case SLAVE_EVENT: return "Slave"; case CREATE_FILE_EVENT: return "Create_file"; case APPEND_BLOCK_EVENT: return "Append_block"; case DELETE_FILE_EVENT: return "Delete_file"; case EXEC_LOAD_EVENT: return "Exec_load"; case RAND_EVENT: return "RAND"; case XID_EVENT: return "Xid"; case USER_VAR_EVENT: return "User var"; case FORMAT_DESCRIPTION_EVENT: return "Format_desc"; case BEGIN_LOAD_QUERY_EVENT: return "Begin_load_query"; case EXECUTE_LOAD_QUERY_EVENT: return "Execute_load_query"; default: return "Unknown"; /* impossible */ } } /* Log_event::Log_event() */ #ifndef MYSQL_CLIENT Log_event::Log_event(THD* thd_arg, uint16 flags_arg, bool using_trans) :log_pos(0), temp_buf(0), exec_time(0), flags(flags_arg), thd(thd_arg) { server_id= thd->server_id; when= thd->start_time; cache_stmt= using_trans; } /* This minimal constructor is for when you are not even sure that there is a valid THD. For example in the server when we are shutting down or flushing logs after receiving a SIGHUP (then we must write a Rotate to the binlog but we have no THD, so we need this minimal constructor). */ Log_event::Log_event() :temp_buf(0), exec_time(0), flags(0), cache_stmt(0), thd(0) { server_id= ::server_id; when= time(NULL); log_pos= 0; } #endif /* !MYSQL_CLIENT */ /* Log_event::Log_event() */ Log_event::Log_event(const char* buf, const Format_description_log_event* description_event) :temp_buf(0), cache_stmt(0) { #ifndef MYSQL_CLIENT thd = 0; #endif when = uint4korr(buf); server_id = uint4korr(buf + SERVER_ID_OFFSET); if (description_event->binlog_version==1) { log_pos= 0; flags= 0; return; } /* 4.0 or newer */ log_pos= uint4korr(buf + LOG_POS_OFFSET); /* If the log is 4.0 (so here it can only be a 4.0 relay log read by the SQL thread or a 4.0 master binlog read by the I/O thread), log_pos is the beginning of the event: we transform it into the end of the event, which is more useful. But how do you know that the log is 4.0: you know it if description_event is version 3 *and* you are not reading a Format_desc (remember that mysqlbinlog starts by assuming that 5.0 logs are in 4.0 format, until it finds a Format_desc). */ if (description_event->binlog_version==3 && buf[EVENT_TYPE_OFFSET]group_master_log_pos" (see inc_group_relay_log_pos()). As it is unreal log_pos, adding the event len's is nonsense. For example, a fake Rotate event should not have its log_pos (which is 0) changed or it will modify Exec_master_log_pos in SHOW SLAVE STATUS, displaying a nonsense value of (a non-zero offset which does not exist in the master's binlog, so which will cause problems if the user uses this value in CHANGE MASTER). */ log_pos+= uint4korr(buf + EVENT_LEN_OFFSET); } DBUG_PRINT("info", ("log_pos: %lu", (ulong) log_pos)); flags= uint2korr(buf + FLAGS_OFFSET); if ((buf[EVENT_TYPE_OFFSET] == FORMAT_DESCRIPTION_EVENT) || (buf[EVENT_TYPE_OFFSET] == ROTATE_EVENT)) { /* These events always have a header which stops here (i.e. their header is FROZEN). */ /* Initialization to zero of all other Log_event members as they're not specified. Currently there are no such members; in the future there will be an event UID (but Format_description and Rotate don't need this UID, as they are not propagated through --log-slave-updates (remember the UID is used to not play a query twice when you have two masters which are slaves of a 3rd master). Then we are done. */ return; } /* otherwise, go on with reading the header from buf (nothing now) */ } #ifndef MYSQL_CLIENT #ifdef HAVE_REPLICATION /* Log_event::exec_event() */ int Log_event::exec_event(struct st_relay_log_info* rli) { DBUG_ENTER("Log_event::exec_event"); /* rli is null when (as far as I (Guilhem) know) the caller is Load_log_event::exec_event *and* that one is called from Execute_load_log_event::exec_event. In this case, we don't do anything here ; Execute_load_log_event::exec_event will call Log_event::exec_event again later with the proper rli. Strictly speaking, if we were sure that rli is null only in the case discussed above, 'if (rli)' is useless here. But as we are not 100% sure, keep it for now. */ if (rli) { /* If in a transaction, and if the slave supports transactions, just inc_event_relay_log_pos(). We only have to check for OPTION_BEGIN (not OPTION_NOT_AUTOCOMMIT) as transactions are logged with BEGIN/COMMIT, not with SET AUTOCOMMIT= . CAUTION: opt_using_transactions means innodb || bdb ; suppose the master supports InnoDB and BDB, but the slave supports only BDB, problems will arise: - suppose an InnoDB table is created on the master, - then it will be MyISAM on the slave - but as opt_using_transactions is true, the slave will believe he is transactional with the MyISAM table. And problems will come when one does START SLAVE; STOP SLAVE; START SLAVE; (the slave will resume at BEGIN whereas there has not been any rollback). This is the problem of using opt_using_transactions instead of a finer "does the slave support _the_transactional_handler_used_on_the_master_". More generally, we'll have problems when a query mixes a transactional handler and MyISAM and STOP SLAVE is issued in the middle of the "transaction". START SLAVE will resume at BEGIN while the MyISAM table has already been updated. */ if ((thd->options & OPTION_BEGIN) && opt_using_transactions) rli->inc_event_relay_log_pos(); else { rli->inc_group_relay_log_pos(log_pos); flush_relay_log_info(rli); /* Note that Rotate_log_event::exec_event() does not call this function, so there is no chance that a fake rotate event resets last_master_timestamp. Note that we update without mutex (probably ok - except in some very rare cases, only consequence is that value may take some time to display in Seconds_Behind_Master - not critical). */ rli->last_master_timestamp= when; } } DBUG_RETURN(0); } /* Log_event::pack_info() */ void Log_event::pack_info(Protocol *protocol) { protocol->store("", &my_charset_bin); } /* Log_event::net_send() Only called by SHOW BINLOG EVENTS */ int Log_event::net_send(Protocol *protocol, const char* log_name, my_off_t pos) { const char *p= strrchr(log_name, FN_LIBCHAR); const char *event_type; if (p) log_name = p + 1; protocol->prepare_for_resend(); protocol->store(log_name, &my_charset_bin); protocol->store((ulonglong) pos); event_type = get_type_str(); protocol->store(event_type, strlen(event_type), &my_charset_bin); protocol->store((uint32) server_id); protocol->store((ulonglong) log_pos); pack_info(protocol); return protocol->write(); } #endif /* HAVE_REPLICATION */ /* Log_event::init_show_field_list() */ void Log_event::init_show_field_list(List* field_list) { field_list->push_back(new Item_empty_string("Log_name", 20)); field_list->push_back(new Item_return_int("Pos", 11, MYSQL_TYPE_LONGLONG)); field_list->push_back(new Item_empty_string("Event_type", 20)); field_list->push_back(new Item_return_int("Server_id", 10, MYSQL_TYPE_LONG)); field_list->push_back(new Item_return_int("End_log_pos", 11, MYSQL_TYPE_LONGLONG)); field_list->push_back(new Item_empty_string("Info", 20)); } /* Log_event::write() */ bool Log_event::write_header(IO_CACHE* file, ulong event_data_length) { byte header[LOG_EVENT_HEADER_LEN]; DBUG_ENTER("Log_event::write_header"); /* Store number of bytes that will be written by this event */ data_written= event_data_length + sizeof(header); /* log_pos != 0 if this is relay-log event. In this case we should not change the position */ if (is_artificial_event()) { /* We should not do any cleanup on slave when reading this. We mark this by setting log_pos to 0. Start_log_event_v3() will detect this on reading and set artificial_event=1 for the event. */ log_pos= 0; } else if (!log_pos) { /* Calculate position of end of event Note that with a SEQ_READ_APPEND cache, my_b_tell() does not work well. So this will give slightly wrong positions for the Format_desc/Rotate/Stop events which the slave writes to its relay log. For example, the initial Format_desc will have end_log_pos=91 instead of 95. Because after writing the first 4 bytes of the relay log, my_b_tell() still reports 0. Because my_b_append() does not update the counter which my_b_tell() later uses (one should probably use my_b_append_tell() to work around this). To get right positions even when writing to the relay log, we use the (new) my_b_safe_tell(). Note that this raises a question on the correctness of all these DBUG_ASSERT(my_b_tell()=rli->event_relay_log_pos). If in a transaction, the log_pos which we calculate below is not very good (because then my_b_safe_tell() returns start position of the BEGIN, so it's like the statement was at the BEGIN's place), but it's not a very serious problem (as the slave, when it is in a transaction, does not take those end_log_pos into account (as it calls inc_event_relay_log_pos()). To be fixed later, so that it looks less strange. But not bug. */ log_pos= my_b_safe_tell(file)+data_written; } /* Header will be of size LOG_EVENT_HEADER_LEN for all events, except for FORMAT_DESCRIPTION_EVENT and ROTATE_EVENT, where it will be LOG_EVENT_MINIMAL_HEADER_LEN (remember these 2 have a frozen header, because we read them before knowing the format). */ int4store(header, (ulong) when); // timestamp header[EVENT_TYPE_OFFSET]= get_type_code(); int4store(header+ SERVER_ID_OFFSET, server_id); int4store(header+ EVENT_LEN_OFFSET, data_written); int4store(header+ LOG_POS_OFFSET, log_pos); int2store(header+ FLAGS_OFFSET, flags); DBUG_RETURN(my_b_safe_write(file, header, sizeof(header)) != 0); } /* Log_event::read_log_event() This needn't be format-tolerant, because we only read LOG_EVENT_MINIMAL_HEADER_LEN (we just want to read the event's length). */ int Log_event::read_log_event(IO_CACHE* file, String* packet, pthread_mutex_t* log_lock) { ulong data_len; int result=0; char buf[LOG_EVENT_MINIMAL_HEADER_LEN]; DBUG_ENTER("read_log_event"); if (log_lock) pthread_mutex_lock(log_lock); if (my_b_read(file, (byte*) buf, sizeof(buf))) { /* If the read hits eof, we must report it as eof so the caller will know it can go into cond_wait to be woken up on the next update to the log. */ DBUG_PRINT("error",("file->error: %d", file->error)); if (!file->error) result= LOG_READ_EOF; else result= (file->error > 0 ? LOG_READ_TRUNC : LOG_READ_IO); goto end; } data_len= uint4korr(buf + EVENT_LEN_OFFSET); if (data_len < LOG_EVENT_MINIMAL_HEADER_LEN || data_len > current_thd->variables.max_allowed_packet) { DBUG_PRINT("error",("data_len: %ld", data_len)); result= ((data_len < LOG_EVENT_MINIMAL_HEADER_LEN) ? LOG_READ_BOGUS : LOG_READ_TOO_LARGE); goto end; } packet->append(buf, sizeof(buf)); data_len-= LOG_EVENT_MINIMAL_HEADER_LEN; if (data_len) { if (packet->append(file, data_len)) { /* Here if we hit EOF it's really an error: as data_len is >=0 there's supposed to be more bytes available. EOF means we are reading the event partially, which should never happen: either we read badly or the binlog is truncated. */ result= file->error >= 0 ? LOG_READ_TRUNC: LOG_READ_IO; /* Implicit goto end; */ } } end: if (log_lock) pthread_mutex_unlock(log_lock); DBUG_RETURN(result); } #endif /* !MYSQL_CLIENT */ #ifndef MYSQL_CLIENT #define UNLOCK_MUTEX if (log_lock) pthread_mutex_unlock(log_lock); #define LOCK_MUTEX if (log_lock) pthread_mutex_lock(log_lock); #else #define UNLOCK_MUTEX #define LOCK_MUTEX #endif /* Log_event::read_log_event() NOTE: Allocates memory; The caller is responsible for clean-up. */ #ifndef MYSQL_CLIENT Log_event* Log_event::read_log_event(IO_CACHE* file, pthread_mutex_t* log_lock, const Format_description_log_event *description_event) #else Log_event* Log_event::read_log_event(IO_CACHE* file, const Format_description_log_event *description_event) #endif { DBUG_ENTER("Log_event::read_log_event(IO_CACHE *, Format_description_log_event *"); DBUG_ASSERT(description_event != 0); char head[LOG_EVENT_MINIMAL_HEADER_LEN]; /* First we only want to read at most LOG_EVENT_MINIMAL_HEADER_LEN, just to check the event for sanity and to know its length; no need to really parse it. We say "at most" because this could be a 3.23 master, which has header of 13 bytes, whereas LOG_EVENT_MINIMAL_HEADER_LEN is 19 bytes (it's "minimal" over the set {MySQL >=4.0}). */ uint header_size= min(description_event->common_header_len, LOG_EVENT_MINIMAL_HEADER_LEN); LOCK_MUTEX; DBUG_PRINT("info", ("my_b_tell=%lu", my_b_tell(file))); if (my_b_read(file, (byte *) head, header_size)) { DBUG_PRINT("info", ("Log_event::read_log_event(IO_CACHE*,Format_desc*) \ failed my_b_read")); UNLOCK_MUTEX; /* No error here; it could be that we are at the file's end. However if the next my_b_read() fails (below), it will be an error as we were able to read the first bytes. */ DBUG_RETURN(0); } uint data_len = uint4korr(head + EVENT_LEN_OFFSET); char *buf= 0; const char *error= 0; Log_event *res= 0; #ifndef max_allowed_packet THD *thd=current_thd; uint max_allowed_packet= thd ? thd->variables.max_allowed_packet : ~(ulong)0; #endif if (data_len > max_allowed_packet) { error = "Event too big"; goto err; } if (data_len < header_size) { error = "Event too small"; goto err; } // some events use the extra byte to null-terminate strings if (!(buf = my_malloc(data_len+1, MYF(MY_WME)))) { error = "Out of memory"; goto err; } buf[data_len] = 0; memcpy(buf, head, header_size); if (my_b_read(file, (byte*) buf + header_size, data_len - header_size)) { error = "read error"; goto err; } if ((res= read_log_event(buf, data_len, &error, description_event))) res->register_temp_buf(buf); err: UNLOCK_MUTEX; if (!res) { DBUG_ASSERT(error != 0); sql_print_error("Error in Log_event::read_log_event(): " "'%s', data_len: %d, event_type: %d", error,data_len,head[EVENT_TYPE_OFFSET]); my_free(buf, MYF(MY_ALLOW_ZERO_PTR)); /* The SQL slave thread will check if file->error<0 to know if there was an I/O error. Even if there is no "low-level" I/O errors with 'file', any of the high-level above errors is worrying enough to stop the SQL thread now ; as we are skipping the current event, going on with reading and successfully executing other events can only corrupt the slave's databases. So stop. */ file->error= -1; } DBUG_RETURN(res); } /* Log_event::read_log_event() Binlog format tolerance is in (buf, event_len, description_event) constructors. */ Log_event* Log_event::read_log_event(const char* buf, uint event_len, const char **error, const Format_description_log_event *description_event) { Log_event* ev; DBUG_ENTER("Log_event::read_log_event(char*,...)"); DBUG_ASSERT(description_event != 0); DBUG_PRINT("info", ("binlog_version: %d", description_event->binlog_version)); if (event_len < EVENT_LEN_OFFSET || (uint) event_len != uint4korr(buf+EVENT_LEN_OFFSET)) { *error="Sanity check failed"; // Needed to free buffer DBUG_RETURN(NULL); // general sanity check - will fail on a partial read } switch(buf[EVENT_TYPE_OFFSET]) { case QUERY_EVENT: ev = new Query_log_event(buf, event_len, description_event, QUERY_EVENT); break; case LOAD_EVENT: ev = new Load_log_event(buf, event_len, description_event); break; case NEW_LOAD_EVENT: ev = new Load_log_event(buf, event_len, description_event); break; case ROTATE_EVENT: ev = new Rotate_log_event(buf, event_len, description_event); break; #ifdef HAVE_REPLICATION case SLAVE_EVENT: /* can never happen (unused event) */ ev = new Slave_log_event(buf, event_len); break; #endif /* HAVE_REPLICATION */ case CREATE_FILE_EVENT: ev = new Create_file_log_event(buf, event_len, description_event); break; case APPEND_BLOCK_EVENT: ev = new Append_block_log_event(buf, event_len, description_event); break; case DELETE_FILE_EVENT: ev = new Delete_file_log_event(buf, event_len, description_event); break; case EXEC_LOAD_EVENT: ev = new Execute_load_log_event(buf, event_len, description_event); break; case START_EVENT_V3: /* this is sent only by MySQL <=4.x */ ev = new Start_log_event_v3(buf, description_event); break; case STOP_EVENT: ev = new Stop_log_event(buf, description_event); break; case INTVAR_EVENT: ev = new Intvar_log_event(buf, description_event); break; case XID_EVENT: ev = new Xid_log_event(buf, description_event); break; case RAND_EVENT: ev = new Rand_log_event(buf, description_event); break; case USER_VAR_EVENT: ev = new User_var_log_event(buf, description_event); break; case FORMAT_DESCRIPTION_EVENT: ev = new Format_description_log_event(buf, event_len, description_event); break; case BEGIN_LOAD_QUERY_EVENT: ev = new Begin_load_query_log_event(buf, event_len, description_event); break; case EXECUTE_LOAD_QUERY_EVENT: ev = new Execute_load_query_log_event(buf, event_len, description_event); break; default: DBUG_PRINT("error",("Unknown evernt code: %d",(int) buf[EVENT_TYPE_OFFSET])); ev= NULL; break; } /* is_valid() are small event-specific sanity tests which are important; for example there are some my_malloc() in constructors (e.g. Query_log_event::Query_log_event(char*...)); when these my_malloc() fail we can't return an error out of the constructor (because constructor is "void") ; so instead we leave the pointer we wanted to allocate (e.g. 'query') to 0 and we test it in is_valid(). Same for Format_description_log_event, member 'post_header_len'. */ if (!ev || !ev->is_valid()) { DBUG_PRINT("error",("Found invalid event in binary log")); delete ev; #ifdef MYSQL_CLIENT if (!force_opt) /* then mysqlbinlog dies */ { *error= "Found invalid event in binary log"; DBUG_RETURN(0); } ev= new Unknown_log_event(buf, description_event); #else *error= "Found invalid event in binary log"; DBUG_RETURN(0); #endif } DBUG_RETURN(ev); } #ifdef MYSQL_CLIENT /* Log_event::print_header() */ void Log_event::print_header(FILE* file, PRINT_EVENT_INFO* print_event_info) { char llbuff[22]; my_off_t hexdump_from= print_event_info->hexdump_from; fputc('#', file); print_timestamp(file); fprintf(file, " server id %d end_log_pos %s ", server_id, llstr(log_pos,llbuff)); /* mysqlbinlog --hexdump */ if (print_event_info->hexdump_from) { fprintf(file, "\n"); uchar *ptr= (uchar*)temp_buf; my_off_t size= uint4korr(ptr + EVENT_LEN_OFFSET) - LOG_EVENT_MINIMAL_HEADER_LEN; my_off_t i; /* Header len * 4 >= header len * (2 chars + space + extra space) */ char *h, hex_string[LOG_EVENT_MINIMAL_HEADER_LEN*4]= {0}; char *c, char_string[16+1]= {0}; /* Pretty-print event common header if header is exactly 19 bytes */ if (print_event_info->common_header_len == LOG_EVENT_MINIMAL_HEADER_LEN) { fprintf(file, "# Position Timestamp Type Master ID " "Size Master Pos Flags \n"); fprintf(file, "# %8.8lx %02x %02x %02x %02x %02x " "%02x %02x %02x %02x %02x %02x %02x %02x " "%02x %02x %02x %02x %02x %02x\n", (unsigned long) hexdump_from, ptr[0], ptr[1], ptr[2], ptr[3], ptr[4], ptr[5], ptr[6], ptr[7], ptr[8], ptr[9], ptr[10], ptr[11], ptr[12], ptr[13], ptr[14], ptr[15], ptr[16], ptr[17], ptr[18]); ptr += LOG_EVENT_MINIMAL_HEADER_LEN; hexdump_from += LOG_EVENT_MINIMAL_HEADER_LEN; } /* Rest of event (without common header) */ for (i= 0, c= char_string, h=hex_string; i < size; i++, ptr++) { my_snprintf(h, 4, "%02x ", *ptr); h += 3; *c++= my_isalnum(&my_charset_bin, *ptr) ? *ptr : '.'; if (i % 16 == 15) { fprintf(file, "# %8.8lx %-48.48s |%16s|\n", (unsigned long) (hexdump_from + (i & 0xfffffff0)), hex_string, char_string); hex_string[0]= 0; char_string[0]= 0; c= char_string; h= hex_string; } else if (i % 8 == 7) *h++ = ' '; } *c= '\0'; /* Non-full last line */ if (hex_string[0]) fprintf(file, "# %8.8lx %-48.48s |%s|\n# ", (unsigned long) (hexdump_from + (i & 0xfffffff0)), hex_string, char_string); } } /* Log_event::print_timestamp() */ void Log_event::print_timestamp(FILE* file, time_t* ts) { struct tm *res; if (!ts) ts = &when; #ifdef MYSQL_SERVER // This is always false struct tm tm_tmp; localtime_r(ts,(res= &tm_tmp)); #else res=localtime(ts); #endif fprintf(file,"%02d%02d%02d %2d:%02d:%02d", res->tm_year % 100, res->tm_mon+1, res->tm_mday, res->tm_hour, res->tm_min, res->tm_sec); } #endif /* MYSQL_CLIENT */ /************************************************************************** Query_log_event methods **************************************************************************/ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) /* Query_log_event::pack_info() This (which is used only for SHOW BINLOG EVENTS) could be updated to print SET @@session_var=. But this is not urgent, as SHOW BINLOG EVENTS is only an information, it does not produce suitable queries to replay (for example it does not print LOAD DATA INFILE). */ void Query_log_event::pack_info(Protocol *protocol) { // TODO: show the catalog ?? char *buf, *pos; if (!(buf= my_malloc(9 + db_len + q_len, MYF(MY_WME)))) return; pos= buf; if (!(flags & LOG_EVENT_SUPPRESS_USE_F) && db && db_len) { pos= strmov(buf, "use `"); memcpy(pos, db, db_len); pos= strmov(pos+db_len, "`; "); } if (query && q_len) { memcpy(pos, query, q_len); pos+= q_len; } protocol->store(buf, pos-buf, &my_charset_bin); my_free(buf, MYF(MY_ALLOW_ZERO_PTR)); } #endif #ifndef MYSQL_CLIENT /* Utility function for the next method */ static void write_str_with_code_and_len(char **dst, const char *src, int len, uint code) { DBUG_ASSERT(src); *((*dst)++)= code; *((*dst)++)= (uchar) len; bmove(*dst, src, len); (*dst)+= len; } /* Query_log_event::write() NOTES: In this event we have to modify the header to have the correct EVENT_LEN_OFFSET as we don't yet know how many status variables we will print! */ bool Query_log_event::write(IO_CACHE* file) { uchar buf[QUERY_HEADER_LEN+ 1+4+ // code of flags2 and flags2 1+8+ // code of sql_mode and sql_mode 1+1+FN_REFLEN+ // code of catalog and catalog length and catalog 1+4+ // code of autoinc and the 2 autoinc variables 1+6+ // code of charset and charset 1+1+MAX_TIME_ZONE_NAME_LENGTH // code of tz and tz length and tz name ], *start, *start_of_status; ulong event_length; if (!query) return 1; // Something wrong with event /* We want to store the thread id: (- as an information for the user when he reads the binlog) - if the query uses temporary table: for the slave SQL thread to know to which master connection the temp table belongs. Now imagine we (write()) are called by the slave SQL thread (we are logging a query executed by this thread; the slave runs with --log-slave-updates). Then this query will be logged with thread_id=the_thread_id_of_the_SQL_thread. Imagine that 2 temp tables of the same name were created simultaneously on the master (in the master binlog you have CREATE TEMPORARY TABLE t; (thread 1) CREATE TEMPORARY TABLE t; (thread 2) ...) then in the slave's binlog there will be CREATE TEMPORARY TABLE t; (thread_id_of_the_slave_SQL_thread) CREATE TEMPORARY TABLE t; (thread_id_of_the_slave_SQL_thread) which is bad (same thread id!). To avoid this, we log the thread's thread id EXCEPT for the SQL slave thread for which we log the original (master's) thread id. Now this moves the bug: what happens if the thread id on the master was 10 and when the slave replicates the query, a connection number 10 is opened by a normal client on the slave, and updates a temp table of the same name? We get a problem again. To avoid this, in the handling of temp tables (sql_base.cc) we use thread_id AND server_id. TODO when this is merged into 4.1: in 4.1, slave_proxy_id has been renamed to pseudo_thread_id and is a session variable: that's to make mysqlbinlog work with temp tables. We probably need to introduce SET PSEUDO_SERVER_ID for mysqlbinlog in 4.1. mysqlbinlog would print: SET PSEUDO_SERVER_ID= SET PSEUDO_THREAD_ID= for each query using temp tables. */ int4store(buf + Q_THREAD_ID_OFFSET, slave_proxy_id); int4store(buf + Q_EXEC_TIME_OFFSET, exec_time); buf[Q_DB_LEN_OFFSET] = (char) db_len; int2store(buf + Q_ERR_CODE_OFFSET, error_code); /* You MUST always write status vars in increasing order of code. This guarantees that a slightly older slave will be able to parse those he knows. */ start_of_status= start= buf+QUERY_HEADER_LEN; if (flags2_inited) { *start++= Q_FLAGS2_CODE; int4store(start, flags2); start+= 4; } if (sql_mode_inited) { *start++= Q_SQL_MODE_CODE; int8store(start, (ulonglong)sql_mode); start+= 8; } if (catalog_len) // i.e. this var is inited (false for 4.0 events) { write_str_with_code_and_len((char **)(&start), catalog, catalog_len, Q_CATALOG_NZ_CODE); /* In 5.0.x where x<4 masters we used to store the end zero here. This was a waste of one byte so we don't do it in x>=4 masters. We change code to Q_CATALOG_NZ_CODE, because re-using the old code would make x<4 slaves of this x>=4 master segfault (expecting a zero when there is none). Remaining compatibility problems are: the older slave will not find the catalog; but it is will not crash, and it's not an issue that it does not find the catalog as catalogs were not used in these older MySQL versions (we store it in binlog and read it from relay log but do nothing useful with it). What is an issue is that the older slave will stop processing the Q_* blocks (and jumps to the db/query) as soon as it sees unknown Q_CATALOG_NZ_CODE; so it will not be able to read Q_AUTO_INCREMENT*, Q_CHARSET and so replication will fail silently in various ways. Documented that you should not mix alpha/beta versions if they are not exactly the same version, with example of 5.0.3->5.0.2 and 5.0.4->5.0.3. If replication is from older to new, the new will recognize Q_CATALOG_CODE and have no problem. */ } if (auto_increment_increment != 1) { *start++= Q_AUTO_INCREMENT; int2store(start, auto_increment_increment); int2store(start+2, auto_increment_offset); start+= 4; } if (charset_inited) { *start++= Q_CHARSET_CODE; memcpy(start, charset, 6); start+= 6; } if (time_zone_len) { /* In the TZ sys table, column Name is of length 64 so this should be ok */ DBUG_ASSERT(time_zone_len <= MAX_TIME_ZONE_NAME_LENGTH); *start++= Q_TIME_ZONE_CODE; *start++= time_zone_len; memcpy(start, time_zone_str, time_zone_len); start+= time_zone_len; } /* Here there could be code like if (command-line-option-which-says-"log_this_variable" && inited) { *start++= Q_THIS_VARIABLE_CODE; int4store(start, this_variable); start+= 4; } */ /* Store length of status variables */ status_vars_len= (uint) (start-start_of_status); int2store(buf + Q_STATUS_VARS_LEN_OFFSET, status_vars_len); /* Calculate length of whole event The "1" below is the \0 in the db's length */ event_length= (uint) (start-buf) + get_post_header_size_for_derived() + db_len + 1 + q_len; return (write_header(file, event_length) || my_b_safe_write(file, (byte*) buf, QUERY_HEADER_LEN) || write_post_header_for_derived(file) || my_b_safe_write(file, (byte*) start_of_status, (uint) (start-start_of_status)) || my_b_safe_write(file, (db) ? (byte*) db : (byte*)"", db_len + 1) || my_b_safe_write(file, (byte*) query, q_len)) ? 1 : 0; } /* Query_log_event::Query_log_event() The simplest constructor that could possibly work. This is used for creating static objects that have a special meaning and are invisible to the log. */ Query_log_event::Query_log_event() :Log_event(), data_buf(0) { } /* Query_log_event::Query_log_event() */ Query_log_event::Query_log_event(THD* thd_arg, const char* query_arg, ulong query_length, bool using_trans, bool suppress_use) :Log_event(thd_arg, ((thd_arg->tmp_table_used ? LOG_EVENT_THREAD_SPECIFIC_F : 0) | (suppress_use ? LOG_EVENT_SUPPRESS_USE_F : 0)), using_trans), data_buf(0), query(query_arg), catalog(thd_arg->catalog), db(thd_arg->db), q_len((uint32) query_length), error_code((thd_arg->killed != THD::NOT_KILLED) ? ((thd_arg->system_thread & SYSTEM_THREAD_DELAYED_INSERT) ? 0 : thd->killed_errno()) : thd_arg->net.last_errno), thread_id(thd_arg->thread_id), /* save the original thread id; we already know the server id */ slave_proxy_id(thd_arg->variables.pseudo_thread_id), flags2_inited(1), sql_mode_inited(1), charset_inited(1), sql_mode(thd_arg->variables.sql_mode), auto_increment_increment(thd_arg->variables.auto_increment_increment), auto_increment_offset(thd_arg->variables.auto_increment_offset) { time_t end_time; time(&end_time); exec_time = (ulong) (end_time - thd->start_time); catalog_len = (catalog) ? (uint32) strlen(catalog) : 0; /* status_vars_len is set just before writing the event */ db_len = (db) ? (uint32) strlen(db) : 0; /* If we don't use flags2 for anything else than options contained in thd->options, it would be more efficient to flags2=thd_arg->options (OPTIONS_WRITTEN_TO_BINLOG would be used only at reading time). But it's likely that we don't want to use 32 bits for 3 bits; in the future we will probably want to reclaim the 29 bits. So we need the &. */ flags2= (uint32) (thd_arg->options & OPTIONS_WRITTEN_TO_BIN_LOG); DBUG_ASSERT(thd->variables.character_set_client->number < 256*256); DBUG_ASSERT(thd->variables.collation_connection->number < 256*256); DBUG_ASSERT(thd->variables.collation_server->number < 256*256); int2store(charset, thd_arg->variables.character_set_client->number); int2store(charset+2, thd_arg->variables.collation_connection->number); int2store(charset+4, thd_arg->variables.collation_server->number); if (thd_arg->time_zone_used) { /* Note that our event becomes dependent on the Time_zone object representing the time zone. Fortunately such objects are never deleted or changed during mysqld's lifetime. */ time_zone_len= thd_arg->variables.time_zone->get_name()->length(); time_zone_str= thd_arg->variables.time_zone->get_name()->ptr(); } else time_zone_len= 0; DBUG_PRINT("info",("Query_log_event has flags2=%lu sql_mode=%lu",flags2,sql_mode)); } #endif /* MYSQL_CLIENT */ /* 2 utility functions for the next method */ static void get_str_len_and_pointer(const char **dst, const char **src, uint *len) { if ((*len= **src)) *dst= *src + 1; // Will be copied later (*src)+= *len+1; } static void copy_str_and_move(char **dst, const char **src, uint len) { memcpy(*dst, *src, len); *src= *dst; (*dst)+= len; *(*dst)++= 0; } /* Query_log_event::Query_log_event() This is used by the SQL slave thread to prepare the event before execution. */ Query_log_event::Query_log_event(const char* buf, uint event_len, const Format_description_log_event *description_event, Log_event_type event_type) :Log_event(buf, description_event), data_buf(0), query(NullS), db(NullS), catalog_len(0), status_vars_len(0), flags2_inited(0), sql_mode_inited(0), charset_inited(0), auto_increment_increment(1), auto_increment_offset(1), time_zone_len(0) { ulong data_len; uint32 tmp; uint8 common_header_len, post_header_len; char *start; const char *end; bool catalog_nz= 1; DBUG_ENTER("Query_log_event::Query_log_event(char*,...)"); common_header_len= description_event->common_header_len; post_header_len= description_event->post_header_len[event_type-1]; DBUG_PRINT("info",("event_len=%ld, common_header_len=%d, post_header_len=%d", event_len, common_header_len, post_header_len)); /* We test if the event's length is sensible, and if so we compute data_len. We cannot rely on QUERY_HEADER_LEN here as it would not be format-tolerant. We use QUERY_HEADER_MINIMAL_LEN which is the same for 3.23, 4.0 & 5.0. */ if (event_len < (uint)(common_header_len + post_header_len)) DBUG_VOID_RETURN; data_len = event_len - (common_header_len + post_header_len); buf+= common_header_len; slave_proxy_id= thread_id = uint4korr(buf + Q_THREAD_ID_OFFSET); exec_time = uint4korr(buf + Q_EXEC_TIME_OFFSET); db_len = (uint)buf[Q_DB_LEN_OFFSET]; // TODO: add a check of all *_len vars error_code = uint2korr(buf + Q_ERR_CODE_OFFSET); /* 5.0 format starts here. Depending on the format, we may or not have affected/warnings etc The remnent post-header to be parsed has length: */ tmp= post_header_len - QUERY_HEADER_MINIMAL_LEN; if (tmp) { status_vars_len= uint2korr(buf + Q_STATUS_VARS_LEN_OFFSET); data_len-= status_vars_len; DBUG_PRINT("info", ("Query_log_event has status_vars_len: %u", (uint) status_vars_len)); tmp-= 2; } /* We have parsed everything we know in the post header for QUERY_EVENT, the rest of post header is either comes from older version MySQL or dedicated to derived events (e.g. Execute_load_query...) */ /* variable-part: the status vars; only in MySQL 5.0 */ start= (char*) (buf+post_header_len); end= (const char*) (start+status_vars_len); for (const uchar* pos= (const uchar*) start; pos < (const uchar*) end;) { switch (*pos++) { case Q_FLAGS2_CODE: flags2_inited= 1; flags2= uint4korr(pos); DBUG_PRINT("info",("In Query_log_event, read flags2: %lu", flags2)); pos+= 4; break; case Q_SQL_MODE_CODE: { #ifndef DBUG_OFF char buff[22]; #endif sql_mode_inited= 1; sql_mode= (ulong) uint8korr(pos); // QQ: Fix when sql_mode is ulonglong DBUG_PRINT("info",("In Query_log_event, read sql_mode: %s", llstr(sql_mode, buff))); pos+= 8; break; } case Q_CATALOG_NZ_CODE: get_str_len_and_pointer(&catalog, (const char **)(&pos), &catalog_len); break; case Q_AUTO_INCREMENT: auto_increment_increment= uint2korr(pos); auto_increment_offset= uint2korr(pos+2); pos+= 4; break; case Q_CHARSET_CODE: { charset_inited= 1; memcpy(charset, pos, 6); pos+= 6; break; } case Q_TIME_ZONE_CODE: { get_str_len_and_pointer(&time_zone_str, (const char **)(&pos), &time_zone_len); break; } case Q_CATALOG_CODE: /* for 5.0.x where 0<=x<=3 masters */ if ((catalog_len= *pos)) catalog= (char*) pos+1; // Will be copied later pos+= catalog_len+2; // leap over end 0 catalog_nz= 0; // catalog has end 0 in event break; default: /* That's why you must write status vars in growing order of code */ DBUG_PRINT("info",("Query_log_event has unknown status vars (first has\ code: %u), skipping the rest of them", (uint) *(pos-1))); pos= (const uchar*) end; // Break loop } } #if !defined(MYSQL_CLIENT) && defined(HAVE_QUERY_CACHE) if (!(start= data_buf = (char*) my_malloc(catalog_len + 1 + time_zone_len + 1 + data_len + 1 + QUERY_CACHE_FLAGS_SIZE + db_len + 1, MYF(MY_WME)))) #else if (!(start= data_buf = (char*) my_malloc(catalog_len + 1 + time_zone_len + 1 + data_len + 1, MYF(MY_WME)))) #endif DBUG_VOID_RETURN; if (catalog_len) // If catalog is given { if (likely(catalog_nz)) // true except if event comes from 5.0.0|1|2|3. copy_str_and_move(&start, &catalog, catalog_len); else { memcpy(start, catalog, catalog_len+1); // copy end 0 catalog= start; start+= catalog_len+1; } } if (time_zone_len) copy_str_and_move(&start, &time_zone_str, time_zone_len); /* A 2nd variable part; this is common to all versions */ memcpy((char*) start, end, data_len); // Copy db and query start[data_len]= '\0'; // End query with \0 (For safetly) db= start; query= start + db_len + 1; q_len= data_len - db_len -1; DBUG_VOID_RETURN; } /* Query_log_event::print() */ #ifdef MYSQL_CLIENT void Query_log_event::print_query_header(FILE* file, PRINT_EVENT_INFO* print_event_info) { // TODO: print the catalog ?? char buff[40],*end; // Enough for SET TIMESTAMP bool different_db= 1; uint32 tmp; if (!print_event_info->short_form) { print_header(file, print_event_info); fprintf(file, "\t%s\tthread_id=%lu\texec_time=%lu\terror_code=%d\n", get_type_str(), (ulong) thread_id, (ulong) exec_time, error_code); } if (!(flags & LOG_EVENT_SUPPRESS_USE_F) && db) { if (different_db= memcmp(print_event_info->db, db, db_len + 1)) memcpy(print_event_info->db, db, db_len + 1); if (db[0] && different_db) fprintf(file, "use %s;\n", db); } end=int10_to_str((long) when, strmov(buff,"SET TIMESTAMP="),10); *end++=';'; *end++='\n'; my_fwrite(file, (byte*) buff, (uint) (end-buff),MYF(MY_NABP | MY_WME)); if (flags & LOG_EVENT_THREAD_SPECIFIC_F) fprintf(file,"SET @@session.pseudo_thread_id=%lu;\n",(ulong)thread_id); /* If flags2_inited==0, this is an event from 3.23 or 4.0; nothing to print (remember we don't produce mixed relay logs so there cannot be 5.0 events before that one so there is nothing to reset). */ if (likely(flags2_inited)) /* likely as this will mainly read 5.0 logs */ { /* tmp is a bitmask of bits which have changed. */ if (likely(print_event_info->flags2_inited)) /* All bits which have changed */ tmp= (print_event_info->flags2) ^ flags2; else /* that's the first Query event we read */ { print_event_info->flags2_inited= 1; tmp= ~((uint32)0); /* all bits have changed */ } if (unlikely(tmp)) /* some bits have changed */ { bool need_comma= 0; fprintf(file, "SET "); print_set_option(file, tmp, OPTION_NO_FOREIGN_KEY_CHECKS, ~flags2, "@@session.foreign_key_checks", &need_comma); print_set_option(file, tmp, OPTION_AUTO_IS_NULL, flags2, "@@session.sql_auto_is_null", &need_comma); print_set_option(file, tmp, OPTION_RELAXED_UNIQUE_CHECKS, ~flags2, "@@session.unique_checks", &need_comma); fprintf(file,";\n"); print_event_info->flags2= flags2; } } /* Now the session variables; it's more efficient to pass SQL_MODE as a number instead of a comma-separated list. FOREIGN_KEY_CHECKS, SQL_AUTO_IS_NULL, UNIQUE_CHECKS are session-only variables (they have no global version; they're not listed in sql_class.h), The tests below work for pure binlogs or pure relay logs. Won't work for mixed relay logs but we don't create mixed relay logs (that is, there is no relay log with a format change except within the 3 first events, which mysqlbinlog handles gracefully). So this code should always be good. */ if (likely(sql_mode_inited)) { if (unlikely(!print_event_info->sql_mode_inited)) /* first Query event */ { print_event_info->sql_mode_inited= 1; /* force a difference to force write */ print_event_info->sql_mode= ~sql_mode; } if (unlikely(print_event_info->sql_mode != sql_mode)) { fprintf(file,"SET @@session.sql_mode=%lu;\n",(ulong)sql_mode); print_event_info->sql_mode= sql_mode; } } if (print_event_info->auto_increment_increment != auto_increment_increment || print_event_info->auto_increment_offset != auto_increment_offset) { fprintf(file,"SET @@session.auto_increment_increment=%lu, @@session.auto_increment_offset=%lu;\n", auto_increment_increment,auto_increment_offset); print_event_info->auto_increment_increment= auto_increment_increment; print_event_info->auto_increment_offset= auto_increment_offset; } /* TODO: print the catalog when we feature SET CATALOG */ if (likely(charset_inited)) { if (unlikely(!print_event_info->charset_inited)) /* first Query event */ { print_event_info->charset_inited= 1; print_event_info->charset[0]= ~charset[0]; // force a difference to force write } if (unlikely(bcmp(print_event_info->charset, charset, 6))) { CHARSET_INFO *cs_info= get_charset(uint2korr(charset), MYF(MY_WME)); if (cs_info) { fprintf(file, "/*!\\C %s */;\n", cs_info->csname); /* for mysql client */ } fprintf(file,"SET " "@@session.character_set_client=%d," "@@session.collation_connection=%d," "@@session.collation_server=%d" ";\n", uint2korr(charset), uint2korr(charset+2), uint2korr(charset+4)); memcpy(print_event_info->charset, charset, 6); } } if (time_zone_len) { if (bcmp(print_event_info->time_zone_str, time_zone_str, time_zone_len+1)) { fprintf(file,"SET @@session.time_zone='%s';\n", time_zone_str); memcpy(print_event_info->time_zone_str, time_zone_str, time_zone_len+1); } } } void Query_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { print_query_header(file, print_event_info); my_fwrite(file, (byte*) query, q_len, MYF(MY_NABP | MY_WME)); fputs(";\n", file); } #endif /* MYSQL_CLIENT */ /* Query_log_event::exec_event() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) static const char *rewrite_db(const char *db) { if (replicate_rewrite_db.is_empty() || db == NULL) return db; I_List_iterator it(replicate_rewrite_db); i_string_pair* tmp; while ((tmp=it++)) { if (strcmp(tmp->key, db) == 0) return tmp->val; } return db; } int Query_log_event::exec_event(struct st_relay_log_info* rli) { return exec_event(rli, query, q_len); } int Query_log_event::exec_event(struct st_relay_log_info* rli, const char *query_arg, uint32 q_len_arg) { const char *new_db= rewrite_db(db); int expected_error,actual_error= 0; /* Colleagues: please never free(thd->catalog) in MySQL. This would lead to bugs as here thd->catalog is a part of an alloced block, not an entire alloced block (see Query_log_event::exec_event()). Same for thd->db. Thank you. */ thd->catalog= catalog_len ? (char *) catalog : (char *)""; thd->set_db(new_db, strlen(new_db)); /* allocates a copy of 'db' */ thd->variables.auto_increment_increment= auto_increment_increment; thd->variables.auto_increment_offset= auto_increment_offset; /* InnoDB internally stores the master log position it has executed so far, i.e. the position just after the COMMIT event. When InnoDB will want to store, the positions in rli won't have been updated yet, so group_master_log_* will point to old BEGIN and event_master_log* will point to the beginning of current COMMIT. But log_pos of the COMMIT Query event is what we want, i.e. the pos of the END of the current log event (COMMIT). We save it in rli so that InnoDB can access it. */ rli->future_group_master_log_pos= log_pos; DBUG_PRINT("info", ("log_pos: %lu", (ulong) log_pos)); clear_all_errors(thd, rli); /* Note: We do not need to execute reset_one_shot_variables() if this db_ok() test fails. Reason: The db stored in binlog events is the same for SET and for its companion query. If the SET is ignored because of db_ok(), the companion query will also be ignored, and if the companion query is ignored in the db_ok() test of ::exec_event(), then the companion SET also have so we don't need to reset_one_shot_variables(). */ if (db_ok(thd->db, replicate_do_db, replicate_ignore_db)) { thd->set_time((time_t)when); thd->query_length= q_len_arg; thd->query= (char*)query_arg; VOID(pthread_mutex_lock(&LOCK_thread_count)); thd->query_id = next_query_id(); VOID(pthread_mutex_unlock(&LOCK_thread_count)); thd->variables.pseudo_thread_id= thread_id; // for temp tables DBUG_PRINT("query",("%s",thd->query)); if (ignored_error_code((expected_error= error_code)) || !check_expected_error(thd,rli,expected_error)) { if (flags2_inited) /* all bits of thd->options which are 1 in OPTIONS_WRITTEN_TO_BIN_LOG must take their value from flags2. */ thd->options= flags2|(thd->options & ~(ulong)OPTIONS_WRITTEN_TO_BIN_LOG); /* else, we are in a 3.23/4.0 binlog; we previously received a Rotate_log_event which reset thd->options and sql_mode etc, so nothing to do. */ /* We do not replicate IGNORE_DIR_IN_CREATE. That is, if the master is a slave which runs with SQL_MODE=IGNORE_DIR_IN_CREATE, this should not force us to ignore the dir too. Imagine you are a ring of machines, and one has a disk problem so that you temporarily need IGNORE_DIR_IN_CREATE on this machine; you don't want it to propagate elsewhere (you don't want all slaves to start ignoring the dirs). */ if (sql_mode_inited) thd->variables.sql_mode= (ulong) ((thd->variables.sql_mode & MODE_NO_DIR_IN_CREATE) | (sql_mode & ~(ulong) MODE_NO_DIR_IN_CREATE)); if (charset_inited) { if (rli->cached_charset_compare(charset)) { /* Verify that we support the charsets found in the event. */ if (!(thd->variables.character_set_client= get_charset(uint2korr(charset), MYF(MY_WME))) || !(thd->variables.collation_connection= get_charset(uint2korr(charset+2), MYF(MY_WME))) || !(thd->variables.collation_server= get_charset(uint2korr(charset+4), MYF(MY_WME)))) { /* We updated the thd->variables with nonsensical values (0). Let's set them to something safe (i.e. which avoids crash), and we'll stop with EE_UNKNOWN_CHARSET in compare_errors (unless set to ignore this error). */ set_slave_thread_default_charset(thd, rli); goto compare_errors; } thd->update_charset(); // for the charset change to take effect } } if (time_zone_len) { String tmp(time_zone_str, time_zone_len, &my_charset_bin); if (!(thd->variables.time_zone= my_tz_find_with_opening_tz_tables(thd, &tmp))) { my_error(ER_UNKNOWN_TIME_ZONE, MYF(0), tmp.c_ptr()); thd->variables.time_zone= global_system_variables.time_zone; goto compare_errors; } } /* Execute the query (note that we bypass dispatch_command()) */ mysql_parse(thd, thd->query, thd->query_length); } else { /* The query got a really bad error on the master (thread killed etc), which could be inconsistent. Parse it to test the table names: if the replicate-*-do|ignore-table rules say "this query must be ignored" then we exit gracefully; otherwise we warn about the bad error and tell DBA to check/fix it. */ if (mysql_test_parse_for_slave(thd, thd->query, thd->query_length)) clear_all_errors(thd, rli); /* Can ignore query */ else { slave_print_error(rli,expected_error, "\ Query partially completed on the master (error on master: %d) \ and was aborted. There is a chance that your master is inconsistent at this \ point. If you are sure that your master is ok, run this query manually on the \ slave and then restart the slave with SET GLOBAL SQL_SLAVE_SKIP_COUNTER=1; \ START SLAVE; . Query: '%s'", expected_error, thd->query); thd->query_error= 1; } goto end; } /* If the query was not ignored, it is printed to the general log */ if (thd->net.last_errno != ER_SLAVE_IGNORED_TABLE) mysql_log.write(thd,COM_QUERY,"%s",thd->query); compare_errors: /* If we expected a non-zero error code, and we don't get the same error code, and none of them should be ignored. */ DBUG_PRINT("info",("expected_error: %d last_errno: %d", expected_error, thd->net.last_errno)); if ((expected_error != (actual_error= thd->net.last_errno)) && expected_error && !ignored_error_code(actual_error) && !ignored_error_code(expected_error)) { slave_print_error(rli, 0, "\ Query caused different errors on master and slave. \ Error on master: '%s' (%d), Error on slave: '%s' (%d). \ Default database: '%s'. Query: '%s'", ER_SAFE(expected_error), expected_error, actual_error ? thd->net.last_error: "no error", actual_error, print_slave_db_safe(db), query_arg); thd->query_error= 1; } /* If we get the same error code as expected, or they should be ignored. */ else if (expected_error == actual_error || ignored_error_code(actual_error)) { DBUG_PRINT("info",("error ignored")); clear_all_errors(thd, rli); } /* Other cases: mostly we expected no error and get one. */ else if (thd->query_error || thd->is_fatal_error) { slave_print_error(rli,actual_error, "Error '%s' on query. Default database: '%s'. Query: '%s'", (actual_error ? thd->net.last_error : "unexpected success or fatal error"), print_slave_db_safe(thd->db), query_arg); thd->query_error= 1; } /* TODO: compare the values of "affected rows" around here. Something like: if ((uint32) affected_in_event != (uint32) affected_on_slave) { sql_print_error("Slave: did not get the expected number of affected \ rows running query from master - expected %d, got %d (this numbers \ should have matched modulo 4294967296).", 0, ...); thd->query_error = 1; } We may also want an option to tell the slave to ignore "affected" mismatch. This mismatch could be implemented with a new ER_ code, and to ignore it you would use --slave-skip-errors... To do the comparison we need to know the value of "affected" which the above mysql_parse() computed. And we need to know the value of "affected" in the master's binlog. Both will be implemented later. The important thing is that we now have the format ready to log the values of "affected" in the binlog. So we can release 5.0.0 before effectively logging "affected" and effectively comparing it. */ } /* End of if (db_ok(... */ end: VOID(pthread_mutex_lock(&LOCK_thread_count)); /* Probably we have set thd->query, thd->db, thd->catalog to point to places in the data_buf of this event. Now the event is going to be deleted probably, so data_buf will be freed, so the thd->... listed above will be pointers to freed memory. So we must set them to 0, so that those bad pointers values are not later used. Note that "cleanup" queries like automatic DROP TEMPORARY TABLE don't suffer from these assignments to 0 as DROP TEMPORARY TABLE uses the db.table syntax. */ thd->catalog= 0; thd->set_db(NULL, 0); /* will free the current database */ thd->query= 0; // just to be sure thd->query_length= 0; VOID(pthread_mutex_unlock(&LOCK_thread_count)); close_thread_tables(thd); free_root(thd->mem_root,MYF(MY_KEEP_PREALLOC)); /* If there was an error we stop. Otherwise we increment positions. Note that we will not increment group* positions if we are just after a SET ONE_SHOT, because SET ONE_SHOT should not be separated from its following updating query. */ return (thd->query_error ? thd->query_error : (thd->one_shot_set ? (rli->inc_event_relay_log_pos(),0) : Log_event::exec_event(rli))); } #endif /************************************************************************** Muted_query_log_event methods **************************************************************************/ #ifndef MYSQL_CLIENT /* Muted_query_log_event::Muted_query_log_event() */ Muted_query_log_event::Muted_query_log_event() :Query_log_event() { } #endif /************************************************************************** Start_log_event_v3 methods **************************************************************************/ #ifndef MYSQL_CLIENT Start_log_event_v3::Start_log_event_v3() :Log_event(), binlog_version(BINLOG_VERSION), artificial_event(0) { created= when; memcpy(server_version, ::server_version, ST_SERVER_VER_LEN); } #endif /* Start_log_event_v3::pack_info() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Start_log_event_v3::pack_info(Protocol *protocol) { char buf[12 + ST_SERVER_VER_LEN + 14 + 22], *pos; pos= strmov(buf, "Server ver: "); pos= strmov(pos, server_version); pos= strmov(pos, ", Binlog ver: "); pos= int10_to_str(binlog_version, pos, 10); protocol->store(buf, (uint) (pos-buf), &my_charset_bin); } #endif /* Start_log_event_v3::print() */ #ifdef MYSQL_CLIENT void Start_log_event_v3::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { if (!print_event_info->short_form) { print_header(file, print_event_info); fprintf(file, "\tStart: binlog v %d, server v %s created ", binlog_version, server_version); print_timestamp(file); if (created) fprintf(file," at startup"); fputc('\n', file); if (flags & LOG_EVENT_BINLOG_IN_USE_F) fprintf(file, "# Warning: this binlog was not closed properly. " "Most probably mysqld crashed writing it.\n"); } if (!artificial_event && created) { #ifdef WHEN_WE_HAVE_THE_RESET_CONNECTION_SQL_COMMAND /* This is for mysqlbinlog: like in replication, we want to delete the stale tmp files left by an unclean shutdown of mysqld (temporary tables) and rollback unfinished transaction. Probably this can be done with RESET CONNECTION (syntax to be defined). */ fprintf(file,"RESET CONNECTION;\n"); #else fprintf(file,"ROLLBACK;\n"); #endif } fflush(file); } #endif /* MYSQL_CLIENT */ /* Start_log_event_v3::Start_log_event_v3() */ Start_log_event_v3::Start_log_event_v3(const char* buf, const Format_description_log_event* description_event) :Log_event(buf, description_event) { buf+= description_event->common_header_len; binlog_version= uint2korr(buf+ST_BINLOG_VER_OFFSET); memcpy(server_version, buf+ST_SERVER_VER_OFFSET, ST_SERVER_VER_LEN); created= uint4korr(buf+ST_CREATED_OFFSET); /* We use log_pos to mark if this was an artificial event or not */ artificial_event= (log_pos == 0); } /* Start_log_event_v3::write() */ #ifndef MYSQL_CLIENT bool Start_log_event_v3::write(IO_CACHE* file) { char buff[START_V3_HEADER_LEN]; int2store(buff + ST_BINLOG_VER_OFFSET,binlog_version); memcpy(buff + ST_SERVER_VER_OFFSET,server_version,ST_SERVER_VER_LEN); int4store(buff + ST_CREATED_OFFSET,created); return (write_header(file, sizeof(buff)) || my_b_safe_write(file, (byte*) buff, sizeof(buff))); } #endif /* Start_log_event_v3::exec_event() The master started IMPLEMENTATION - To handle the case where the master died without having time to write DROP TEMPORARY TABLE, DO RELEASE_LOCK (prepared statements' deletion is TODO), we clean up all temporary tables that we got, if we are sure we can (see below). TODO - Remove all active user locks. Guilhem 2003-06: this is true but not urgent: the worst it can cause is the use of a bit of memory for a user lock which will not be used anymore. If the user lock is later used, the old one will be released. In other words, no deadlock problem. */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) int Start_log_event_v3::exec_event(struct st_relay_log_info* rli) { DBUG_ENTER("Start_log_event_v3::exec_event"); switch (binlog_version) { case 3: case 4: /* This can either be 4.x (then a Start_log_event_v3 is only at master startup so we are sure the master has restarted and cleared his temp tables; the event always has 'created'>0) or 5.0 (then we have to test 'created'). */ if (created) { close_temporary_tables(thd); cleanup_load_tmpdir(); } break; /* Now the older formats; in that case load_tmpdir is cleaned up by the I/O thread. */ case 1: if (strncmp(rli->relay_log.description_event_for_exec->server_version, "3.23.57",7) >= 0 && created) { /* Can distinguish, based on the value of 'created': this event was generated at master startup. */ close_temporary_tables(thd); } /* Otherwise, can't distinguish a Start_log_event generated at master startup and one generated by master FLUSH LOGS, so cannot be sure temp tables have to be dropped. So do nothing. */ break; default: /* this case is impossible */ DBUG_RETURN(1); } DBUG_RETURN(Log_event::exec_event(rli)); } #endif /* defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) */ /*************************************************************************** Format_description_log_event methods ****************************************************************************/ /* Format_description_log_event 1st ctor. SYNOPSIS Format_description_log_event::Format_description_log_event binlog_version the binlog version for which we want to build an event. Can be 1 (=MySQL 3.23), 3 (=4.0.x x>=2 and 4.1) or 4 (MySQL 5.0). Note that the old 4.0 (binlog version 2) is not supported; it should not be used for replication with 5.0. DESCRIPTION Ctor. Can be used to create the event to write to the binary log (when the server starts or when FLUSH LOGS), or to create artificial events to parse binlogs from MySQL 3.23 or 4.x. When in a client, only the 2nd use is possible. */ Format_description_log_event:: Format_description_log_event(uint8 binlog_ver, const char* server_ver) :Start_log_event_v3() { created= when; binlog_version= binlog_ver; switch (binlog_ver) { case 4: /* MySQL 5.0 */ memcpy(server_version, ::server_version, ST_SERVER_VER_LEN); common_header_len= LOG_EVENT_HEADER_LEN; number_of_event_types= LOG_EVENT_TYPES; /* we'll catch my_malloc() error in is_valid() */ post_header_len=(uint8*) my_malloc(number_of_event_types*sizeof(uint8), MYF(MY_ZEROFILL)); /* This long list of assignments is not beautiful, but I see no way to make it nicer, as the right members are #defines, not array members, so it's impossible to write a loop. */ if (post_header_len) { post_header_len[START_EVENT_V3-1]= START_V3_HEADER_LEN; post_header_len[QUERY_EVENT-1]= QUERY_HEADER_LEN; post_header_len[ROTATE_EVENT-1]= ROTATE_HEADER_LEN; post_header_len[LOAD_EVENT-1]= LOAD_HEADER_LEN; post_header_len[CREATE_FILE_EVENT-1]= CREATE_FILE_HEADER_LEN; post_header_len[APPEND_BLOCK_EVENT-1]= APPEND_BLOCK_HEADER_LEN; post_header_len[EXEC_LOAD_EVENT-1]= EXEC_LOAD_HEADER_LEN; post_header_len[DELETE_FILE_EVENT-1]= DELETE_FILE_HEADER_LEN; post_header_len[NEW_LOAD_EVENT-1]= post_header_len[LOAD_EVENT-1]; post_header_len[FORMAT_DESCRIPTION_EVENT-1]= FORMAT_DESCRIPTION_HEADER_LEN; post_header_len[BEGIN_LOAD_QUERY_EVENT-1]= post_header_len[APPEND_BLOCK_EVENT-1]; post_header_len[EXECUTE_LOAD_QUERY_EVENT-1]= EXECUTE_LOAD_QUERY_HEADER_LEN; } break; case 1: /* 3.23 */ case 3: /* 4.0.x x>=2 */ /* We build an artificial (i.e. not sent by the master) event, which describes what those old master versions send. */ if (binlog_ver==1) strmov(server_version, server_ver ? server_ver : "3.23"); else strmov(server_version, server_ver ? server_ver : "4.0"); common_header_len= binlog_ver==1 ? OLD_HEADER_LEN : LOG_EVENT_MINIMAL_HEADER_LEN; /* The first new event in binlog version 4 is Format_desc. So any event type after that does not exist in older versions. We use the events known by version 3, even if version 1 had only a subset of them (this is not a problem: it uses a few bytes for nothing but unifies code; it does not make the slave detect less corruptions). */ number_of_event_types= FORMAT_DESCRIPTION_EVENT - 1; post_header_len=(uint8*) my_malloc(number_of_event_types*sizeof(uint8), MYF(0)); if (post_header_len) { post_header_len[START_EVENT_V3-1]= START_V3_HEADER_LEN; post_header_len[QUERY_EVENT-1]= QUERY_HEADER_MINIMAL_LEN; post_header_len[STOP_EVENT-1]= 0; post_header_len[ROTATE_EVENT-1]= (binlog_ver==1) ? 0 : ROTATE_HEADER_LEN; post_header_len[INTVAR_EVENT-1]= 0; post_header_len[LOAD_EVENT-1]= LOAD_HEADER_LEN; post_header_len[SLAVE_EVENT-1]= 0; post_header_len[CREATE_FILE_EVENT-1]= CREATE_FILE_HEADER_LEN; post_header_len[APPEND_BLOCK_EVENT-1]= APPEND_BLOCK_HEADER_LEN; post_header_len[EXEC_LOAD_EVENT-1]= EXEC_LOAD_HEADER_LEN; post_header_len[DELETE_FILE_EVENT-1]= DELETE_FILE_HEADER_LEN; post_header_len[NEW_LOAD_EVENT-1]= post_header_len[LOAD_EVENT-1]; post_header_len[RAND_EVENT-1]= 0; post_header_len[USER_VAR_EVENT-1]= 0; } break; default: /* Includes binlog version 2 i.e. 4.0.x x<=1 */ post_header_len= 0; /* will make is_valid() fail */ break; } } /* The problem with this constructor is that the fixed header may have a length different from this version, but we don't know this length as we have not read the Format_description_log_event which says it, yet. This length is in the post-header of the event, but we don't know where the post-header starts. So this type of event HAS to: - either have the header's length at the beginning (in the header, at a fixed position which will never be changed), not in the post-header. That would make the header be "shifted" compared to other events. - or have a header of size LOG_EVENT_MINIMAL_HEADER_LEN (19), in all future versions, so that we know for sure. I (Guilhem) chose the 2nd solution. Rotate has the same constraint (because it is sent before Format_description_log_event). */ Format_description_log_event:: Format_description_log_event(const char* buf, uint event_len, const Format_description_log_event* description_event) :Start_log_event_v3(buf, description_event) { DBUG_ENTER("Format_description_log_event::Format_description_log_event(char*,...)"); buf+= LOG_EVENT_MINIMAL_HEADER_LEN; if ((common_header_len=buf[ST_COMMON_HEADER_LEN_OFFSET]) < OLD_HEADER_LEN) DBUG_VOID_RETURN; /* sanity check */ number_of_event_types= event_len-(LOG_EVENT_MINIMAL_HEADER_LEN+ST_COMMON_HEADER_LEN_OFFSET+1); DBUG_PRINT("info", ("common_header_len=%d number_of_event_types=%d", common_header_len, number_of_event_types)); /* If alloc fails, we'll detect it in is_valid() */ post_header_len= (uint8*) my_memdup((byte*)buf+ST_COMMON_HEADER_LEN_OFFSET+1, number_of_event_types* sizeof(*post_header_len), MYF(0)); DBUG_VOID_RETURN; } #ifndef MYSQL_CLIENT bool Format_description_log_event::write(IO_CACHE* file) { /* We don't call Start_log_event_v3::write() because this would make 2 my_b_safe_write(). */ byte buff[FORMAT_DESCRIPTION_HEADER_LEN]; int2store(buff + ST_BINLOG_VER_OFFSET,binlog_version); memcpy((char*) buff + ST_SERVER_VER_OFFSET,server_version,ST_SERVER_VER_LEN); int4store(buff + ST_CREATED_OFFSET,created); buff[ST_COMMON_HEADER_LEN_OFFSET]= LOG_EVENT_HEADER_LEN; memcpy((char*) buff+ST_COMMON_HEADER_LEN_OFFSET+1, (byte*) post_header_len, LOG_EVENT_TYPES); return (write_header(file, sizeof(buff)) || my_b_safe_write(file, buff, sizeof(buff))); } #endif /* SYNOPSIS Format_description_log_event::exec_event() IMPLEMENTATION Save the information which describes the binlog's format, to be able to read all coming events. Call Start_log_event_v3::exec_event(). */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) int Format_description_log_event::exec_event(struct st_relay_log_info* rli) { DBUG_ENTER("Format_description_log_event::exec_event"); /* save the information describing this binlog */ delete rli->relay_log.description_event_for_exec; rli->relay_log.description_event_for_exec= this; #ifdef USING_TRANSACTIONS /* As a transaction NEVER spans on 2 or more binlogs: if we have an active transaction at this point, the master died while writing the transaction to the binary log, i.e. while flushing the binlog cache to the binlog. As the write was started, the transaction had been committed on the master, so we lack of information to replay this transaction on the slave; all we can do is stop with error. Note: this event could be sent by the master to inform us of the format of its binlog; in other words maybe it is not at its original place when it comes to us; we'll know this by checking log_pos ("artificial" events have log_pos == 0). */ if (!artificial_event && created && thd->transaction.all.nht) { slave_print_error(rli, 0, "Rolling back unfinished transaction (no " "COMMIT or ROLLBACK) from relay log. A probable cause " "is that the master died while writing the transaction " "to its binary log."); end_trans(thd, ROLLBACK); } #endif /* If this event comes from ourselves, there is no cleaning task to perform, we don't call Start_log_event_v3::exec_event() (this was just to update the log's description event). */ if (server_id == (uint32) ::server_id) { /* Do not modify rli->group_master_log_pos, as this event did not exist on the master. That is, just update the *relay log* coordinates; this is done by passing log_pos=0 to inc_group_relay_log_pos, like we do in Stop_log_event::exec_event(). If in a transaction, don't touch group_* coordinates. */ if (thd->options & OPTION_BEGIN) rli->inc_event_relay_log_pos(); else { rli->inc_group_relay_log_pos(0); flush_relay_log_info(rli); } DBUG_RETURN(0); } /* If the event was not requested by the slave i.e. the master sent it while the slave asked for a position >4, the event will make rli->group_master_log_pos advance. Say that the slave asked for position 1000, and the Format_desc event's end is 96. Then in the beginning of replication rli->group_master_log_pos will be 0, then 96, then jump to first really asked event (which is >96). So this is ok. */ DBUG_RETURN(Start_log_event_v3::exec_event(rli)); } #endif /************************************************************************** Load_log_event methods General note about Load_log_event: the binlogging of LOAD DATA INFILE is going to be changed in 5.0 (or maybe in 5.1; not decided yet). However, the 5.0 slave could still have to read such events (from a 4.x master), convert them (which just means maybe expand the header, when 5.0 servers have a UID in events) (remember that whatever is after the header will be like in 4.x, as this event's format is not modified in 5.0 as we will use new types of events to log the new LOAD DATA INFILE features). To be able to read/convert, we just need to not assume that the common header is of length LOG_EVENT_HEADER_LEN (we must use the description event). Note that I (Guilhem) manually tested replication of a big LOAD DATA INFILE between 3.23 and 5.0, and between 4.0 and 5.0, and it works fine (and the positions displayed in SHOW SLAVE STATUS then are fine too). **************************************************************************/ /* Load_log_event::pack_info() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) uint Load_log_event::get_query_buffer_length() { return 5 + db_len + 3 + // "use DB; " 18 + fname_len + 2 + // "LOAD DATA INFILE 'file''" 7 + // LOCAL 9 + // " REPLACE or IGNORE " 13 + table_name_len*2 + // "INTO TABLE `table`" 21 + sql_ex.field_term_len*4 + 2 + // " FIELDS TERMINATED BY 'str'" 23 + sql_ex.enclosed_len*4 + 2 + // " OPTIONALLY ENCLOSED BY 'str'" 12 + sql_ex.escaped_len*4 + 2 + // " ESCAPED BY 'str'" 21 + sql_ex.line_term_len*4 + 2 + // " FIELDS TERMINATED BY 'str'" 19 + sql_ex.line_start_len*4 + 2 + // " LINES STARTING BY 'str'" 15 + 22 + // " IGNORE xxx LINES" 3 + (num_fields-1)*2 + field_block_len; // " (field1, field2, ...)" } void Load_log_event::print_query(bool need_db, char *buf, char **end, char **fn_start, char **fn_end) { char *pos= buf; if (need_db && db && db_len) { pos= strmov(pos, "use `"); memcpy(pos, db, db_len); pos= strmov(pos+db_len, "`; "); } pos= strmov(pos, "LOAD DATA "); if (fn_start) *fn_start= pos; if (check_fname_outside_temp_buf()) pos= strmov(pos, "LOCAL "); pos= strmov(pos, "INFILE '"); memcpy(pos, fname, fname_len); pos= strmov(pos+fname_len, "' "); if (sql_ex.opt_flags & REPLACE_FLAG) pos= strmov(pos, " REPLACE "); else if (sql_ex.opt_flags & IGNORE_FLAG) pos= strmov(pos, " IGNORE "); pos= strmov(pos ,"INTO"); if (fn_end) *fn_end= pos; pos= strmov(pos ," TABLE `"); memcpy(pos, table_name, table_name_len); pos+= table_name_len; /* We have to create all optinal fields as the default is not empty */ pos= strmov(pos, "` FIELDS TERMINATED BY "); pos= pretty_print_str(pos, sql_ex.field_term, sql_ex.field_term_len); if (sql_ex.opt_flags & OPT_ENCLOSED_FLAG) pos= strmov(pos, " OPTIONALLY "); pos= strmov(pos, " ENCLOSED BY "); pos= pretty_print_str(pos, sql_ex.enclosed, sql_ex.enclosed_len); pos= strmov(pos, " ESCAPED BY "); pos= pretty_print_str(pos, sql_ex.escaped, sql_ex.escaped_len); pos= strmov(pos, " LINES TERMINATED BY "); pos= pretty_print_str(pos, sql_ex.line_term, sql_ex.line_term_len); if (sql_ex.line_start_len) { pos= strmov(pos, " STARTING BY "); pos= pretty_print_str(pos, sql_ex.line_start, sql_ex.line_start_len); } if ((long) skip_lines > 0) { pos= strmov(pos, " IGNORE "); pos= longlong10_to_str((longlong) skip_lines, pos, 10); pos= strmov(pos," LINES "); } if (num_fields) { uint i; const char *field= fields; pos= strmov(pos, " ("); for (i = 0; i < num_fields; i++) { if (i) { *pos++= ' '; *pos++= ','; } memcpy(pos, field, field_lens[i]); pos+= field_lens[i]; field+= field_lens[i] + 1; } *pos++= ')'; } *end= pos; } void Load_log_event::pack_info(Protocol *protocol) { char *buf, *end; if (!(buf= my_malloc(get_query_buffer_length(), MYF(MY_WME)))) return; print_query(TRUE, buf, &end, 0, 0); protocol->store(buf, end-buf, &my_charset_bin); my_free(buf, MYF(0)); } #endif /* defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) */ #ifndef MYSQL_CLIENT /* Load_log_event::write_data_header() */ bool Load_log_event::write_data_header(IO_CACHE* file) { char buf[LOAD_HEADER_LEN]; int4store(buf + L_THREAD_ID_OFFSET, slave_proxy_id); int4store(buf + L_EXEC_TIME_OFFSET, exec_time); int4store(buf + L_SKIP_LINES_OFFSET, skip_lines); buf[L_TBL_LEN_OFFSET] = (char)table_name_len; buf[L_DB_LEN_OFFSET] = (char)db_len; int4store(buf + L_NUM_FIELDS_OFFSET, num_fields); return my_b_safe_write(file, (byte*)buf, LOAD_HEADER_LEN) != 0; } /* Load_log_event::write_data_body() */ bool Load_log_event::write_data_body(IO_CACHE* file) { if (sql_ex.write_data(file)) return 1; if (num_fields && fields && field_lens) { if (my_b_safe_write(file, (byte*)field_lens, num_fields) || my_b_safe_write(file, (byte*)fields, field_block_len)) return 1; } return (my_b_safe_write(file, (byte*)table_name, table_name_len + 1) || my_b_safe_write(file, (byte*)db, db_len + 1) || my_b_safe_write(file, (byte*)fname, fname_len)); } /* Load_log_event::Load_log_event() */ Load_log_event::Load_log_event(THD *thd_arg, sql_exchange *ex, const char *db_arg, const char *table_name_arg, List &fields_arg, enum enum_duplicates handle_dup, bool ignore, bool using_trans) :Log_event(thd_arg, !thd_arg->tmp_table_used ? 0 : LOG_EVENT_THREAD_SPECIFIC_F, using_trans), thread_id(thd_arg->thread_id), slave_proxy_id(thd_arg->variables.pseudo_thread_id), num_fields(0),fields(0), field_lens(0),field_block_len(0), table_name(table_name_arg ? table_name_arg : ""), db(db_arg), fname(ex->file_name), local_fname(FALSE) { time_t end_time; time(&end_time); exec_time = (ulong) (end_time - thd_arg->start_time); /* db can never be a zero pointer in 4.0 */ db_len = (uint32) strlen(db); table_name_len = (uint32) strlen(table_name); fname_len = (fname) ? (uint) strlen(fname) : 0; sql_ex.field_term = (char*) ex->field_term->ptr(); sql_ex.field_term_len = (uint8) ex->field_term->length(); sql_ex.enclosed = (char*) ex->enclosed->ptr(); sql_ex.enclosed_len = (uint8) ex->enclosed->length(); sql_ex.line_term = (char*) ex->line_term->ptr(); sql_ex.line_term_len = (uint8) ex->line_term->length(); sql_ex.line_start = (char*) ex->line_start->ptr(); sql_ex.line_start_len = (uint8) ex->line_start->length(); sql_ex.escaped = (char*) ex->escaped->ptr(); sql_ex.escaped_len = (uint8) ex->escaped->length(); sql_ex.opt_flags = 0; sql_ex.cached_new_format = -1; if (ex->dumpfile) sql_ex.opt_flags|= DUMPFILE_FLAG; if (ex->opt_enclosed) sql_ex.opt_flags|= OPT_ENCLOSED_FLAG; sql_ex.empty_flags= 0; switch (handle_dup) { case DUP_REPLACE: sql_ex.opt_flags|= REPLACE_FLAG; break; case DUP_UPDATE: // Impossible here case DUP_ERROR: break; } if (ignore) sql_ex.opt_flags|= IGNORE_FLAG; if (!ex->field_term->length()) sql_ex.empty_flags |= FIELD_TERM_EMPTY; if (!ex->enclosed->length()) sql_ex.empty_flags |= ENCLOSED_EMPTY; if (!ex->line_term->length()) sql_ex.empty_flags |= LINE_TERM_EMPTY; if (!ex->line_start->length()) sql_ex.empty_flags |= LINE_START_EMPTY; if (!ex->escaped->length()) sql_ex.empty_flags |= ESCAPED_EMPTY; skip_lines = ex->skip_lines; List_iterator li(fields_arg); field_lens_buf.length(0); fields_buf.length(0); Item* item; while ((item = li++)) { num_fields++; uchar len = (uchar) strlen(item->name); field_block_len += len + 1; fields_buf.append(item->name, len + 1); field_lens_buf.append((char*)&len, 1); } field_lens = (const uchar*)field_lens_buf.ptr(); fields = fields_buf.ptr(); } #endif /* !MYSQL_CLIENT */ /* Load_log_event::Load_log_event() NOTE The caller must do buf[event_len] = 0 before he starts using the constructed event. */ Load_log_event::Load_log_event(const char *buf, uint event_len, const Format_description_log_event *description_event) :Log_event(buf, description_event), num_fields(0), fields(0), field_lens(0),field_block_len(0), table_name(0), db(0), fname(0), local_fname(FALSE) { DBUG_ENTER("Load_log_event"); /* I (Guilhem) manually tested replication of LOAD DATA INFILE for 3.23->5.0, 4.0->5.0 and 5.0->5.0 and it works. */ if (event_len) copy_log_event(buf, event_len, ((buf[EVENT_TYPE_OFFSET] == LOAD_EVENT) ? LOAD_HEADER_LEN + description_event->common_header_len : LOAD_HEADER_LEN + LOG_EVENT_HEADER_LEN), description_event); /* otherwise it's a derived class, will call copy_log_event() itself */ DBUG_VOID_RETURN; } /* Load_log_event::copy_log_event() */ int Load_log_event::copy_log_event(const char *buf, ulong event_len, int body_offset, const Format_description_log_event *description_event) { DBUG_ENTER("Load_log_event::copy_log_event"); uint data_len; char* buf_end = (char*)buf + event_len; /* this is the beginning of the post-header */ const char* data_head = buf + description_event->common_header_len; slave_proxy_id= thread_id= uint4korr(data_head + L_THREAD_ID_OFFSET); exec_time = uint4korr(data_head + L_EXEC_TIME_OFFSET); skip_lines = uint4korr(data_head + L_SKIP_LINES_OFFSET); table_name_len = (uint)data_head[L_TBL_LEN_OFFSET]; db_len = (uint)data_head[L_DB_LEN_OFFSET]; num_fields = uint4korr(data_head + L_NUM_FIELDS_OFFSET); if ((int) event_len < body_offset) DBUG_RETURN(1); /* Sql_ex.init() on success returns the pointer to the first byte after the sql_ex structure, which is the start of field lengths array. */ if (!(field_lens= (uchar*)sql_ex.init((char*)buf + body_offset, buf_end, buf[EVENT_TYPE_OFFSET] != LOAD_EVENT))) DBUG_RETURN(1); data_len = event_len - body_offset; if (num_fields > data_len) // simple sanity check against corruption DBUG_RETURN(1); for (uint i = 0; i < num_fields; i++) field_block_len += (uint)field_lens[i] + 1; fields = (char*)field_lens + num_fields; table_name = fields + field_block_len; db = table_name + table_name_len + 1; fname = db + db_len + 1; fname_len = strlen(fname); // null termination is accomplished by the caller doing buf[event_len]=0 DBUG_RETURN(0); } /* Load_log_event::print() */ #ifdef MYSQL_CLIENT void Load_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { print(file, print_event_info, 0); } void Load_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info, bool commented) { DBUG_ENTER("Load_log_event::print"); if (!print_event_info->short_form) { print_header(file, print_event_info); fprintf(file, "\tQuery\tthread_id=%ld\texec_time=%ld\n", thread_id, exec_time); } bool different_db= 1; if (db) { /* If the database is different from the one of the previous statement, we need to print the "use" command, and we update the last_db. But if commented, the "use" is going to be commented so we should not update the last_db. */ if ((different_db= memcmp(print_event_info->db, db, db_len + 1)) && !commented) memcpy(print_event_info->db, db, db_len + 1); } if (db && db[0] && different_db) fprintf(file, "%suse %s;\n", commented ? "# " : "", db); if (flags & LOG_EVENT_THREAD_SPECIFIC_F) fprintf(file,"%sSET @@session.pseudo_thread_id=%lu;\n", commented ? "# " : "", (ulong)thread_id); fprintf(file, "%sLOAD DATA ", commented ? "# " : ""); if (check_fname_outside_temp_buf()) fprintf(file, "LOCAL "); fprintf(file, "INFILE '%-*s' ", fname_len, fname); if (sql_ex.opt_flags & REPLACE_FLAG) fprintf(file," REPLACE "); else if (sql_ex.opt_flags & IGNORE_FLAG) fprintf(file," IGNORE "); fprintf(file, "INTO TABLE `%s`", table_name); fprintf(file, " FIELDS TERMINATED BY "); pretty_print_str(file, sql_ex.field_term, sql_ex.field_term_len); if (sql_ex.opt_flags & OPT_ENCLOSED_FLAG) fprintf(file," OPTIONALLY "); fprintf(file, " ENCLOSED BY "); pretty_print_str(file, sql_ex.enclosed, sql_ex.enclosed_len); fprintf(file, " ESCAPED BY "); pretty_print_str(file, sql_ex.escaped, sql_ex.escaped_len); fprintf(file," LINES TERMINATED BY "); pretty_print_str(file, sql_ex.line_term, sql_ex.line_term_len); if (sql_ex.line_start) { fprintf(file," STARTING BY "); pretty_print_str(file, sql_ex.line_start, sql_ex.line_start_len); } if ((long) skip_lines > 0) fprintf(file, " IGNORE %ld LINES", (long) skip_lines); if (num_fields) { uint i; const char* field = fields; fprintf(file, " ("); for (i = 0; i < num_fields; i++) { if (i) fputc(',', file); fprintf(file, field); field += field_lens[i] + 1; } fputc(')', file); } fprintf(file, ";\n"); DBUG_VOID_RETURN; } #endif /* MYSQL_CLIENT */ /* Load_log_event::set_fields() Note that this function can not use the member variable for the database, since LOAD DATA INFILE on the slave can be for a different database than the current one. This is the reason for the affected_db argument to this method. */ #ifndef MYSQL_CLIENT void Load_log_event::set_fields(const char* affected_db, List &field_list, Name_resolution_context *context) { uint i; const char* field = fields; for (i= 0; i < num_fields; i++) { field_list.push_back(new Item_field(context, affected_db, table_name, field)); field+= field_lens[i] + 1; } } #endif /* !MYSQL_CLIENT */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) /* Does the data loading job when executing a LOAD DATA on the slave SYNOPSIS Load_log_event::exec_event net rli use_rli_only_for_errors - if set to 1, rli is provided to Load_log_event::exec_event only for this function to have RPL_LOG_NAME and rli->last_slave_error, both being used by error reports. rli's position advancing is skipped (done by the caller which is Execute_load_log_event::exec_event). - if set to 0, rli is provided for full use, i.e. for error reports and position advancing. DESCRIPTION Does the data loading job when executing a LOAD DATA on the slave RETURN VALUE 0 Success 1 Failure */ int Load_log_event::exec_event(NET* net, struct st_relay_log_info* rli, bool use_rli_only_for_errors) { const char *new_db= rewrite_db(db); thd->set_db(new_db, strlen(new_db)); DBUG_ASSERT(thd->query == 0); thd->query_length= 0; // Should not be needed thd->query_error= 0; clear_all_errors(thd, rli); /* Usually mysql_init_query() is called by mysql_parse(), but we need it here as the present method does not call mysql_parse(). */ mysql_init_query(thd, 0, 0); if (!use_rli_only_for_errors) { /* Saved for InnoDB, see comment in Query_log_event::exec_event() */ rli->future_group_master_log_pos= log_pos; DBUG_PRINT("info", ("log_pos: %lu", (ulong) log_pos)); } /* We test replicate_*_db rules. Note that we have already prepared the file to load, even if we are going to ignore and delete it now. So it is possible that we did a lot of disk writes for nothing. In other words, a big LOAD DATA INFILE on the master will still consume a lot of space on the slave (space in the relay log + space of temp files: twice the space of the file to load...) even if it will finally be ignored. TODO: fix this; this can be done by testing rules in Create_file_log_event::exec_event() and then discarding Append_block and al. Another way is do the filtering in the I/O thread (more efficient: no disk writes at all). Note: We do not need to execute reset_one_shot_variables() if this db_ok() test fails. Reason: The db stored in binlog events is the same for SET and for its companion query. If the SET is ignored because of db_ok(), the companion query will also be ignored, and if the companion query is ignored in the db_ok() test of ::exec_event(), then the companion SET also have so we don't need to reset_one_shot_variables(). */ if (db_ok(thd->db, replicate_do_db, replicate_ignore_db)) { thd->set_time((time_t)when); VOID(pthread_mutex_lock(&LOCK_thread_count)); thd->query_id = next_query_id(); VOID(pthread_mutex_unlock(&LOCK_thread_count)); /* Initing thd->row_count is not necessary in theory as this variable has no influence in the case of the slave SQL thread (it is used to generate a "data truncated" warning but which is absorbed and never gets to the error log); still we init it to avoid a Valgrind message. */ mysql_reset_errors(thd, 0); TABLE_LIST tables; bzero((char*) &tables,sizeof(tables)); tables.db= thd->strmake(thd->db, thd->db_length); tables.alias = tables.table_name = (char*) table_name; tables.lock_type = TL_WRITE; tables.updating= 1; // the table will be opened in mysql_load if (table_rules_on && !tables_ok(thd, &tables)) { // TODO: this is a bug - this needs to be moved to the I/O thread if (net) skip_load_data_infile(net); } else { char llbuff[22]; char *end; enum enum_duplicates handle_dup; bool ignore= 0; char *load_data_query; /* Forge LOAD DATA INFILE query which will be used in SHOW PROCESS LIST and written to slave's binlog if binlogging is on. */ if (!(load_data_query= (char *)thd->alloc(get_query_buffer_length() + 1))) { /* This will set thd->fatal_error in case of OOM. So we surely will notice that something is wrong. */ goto error; } print_query(FALSE, load_data_query, &end, (char **)&thd->lex->fname_start, (char **)&thd->lex->fname_end); *end= 0; thd->query_length= end - load_data_query; thd->query= load_data_query; if (sql_ex.opt_flags & REPLACE_FLAG) { handle_dup= DUP_REPLACE; } else if (sql_ex.opt_flags & IGNORE_FLAG) { ignore= 1; handle_dup= DUP_ERROR; } else { /* When replication is running fine, if it was DUP_ERROR on the master then we could choose IGNORE here, because if DUP_ERROR suceeded on master, and data is identical on the master and slave, then there should be no uniqueness errors on slave, so IGNORE is the same as DUP_ERROR. But in the unlikely case of uniqueness errors (because the data on the master and slave happen to be different (user error or bug), we want LOAD DATA to print an error message on the slave to discover the problem. If reading from net (a 3.23 master), mysql_load() will change this to IGNORE. */ handle_dup= DUP_ERROR; } /* We need to set thd->lex->sql_command and thd->lex->duplicates since InnoDB tests these variables to decide if this is a LOAD DATA ... REPLACE INTO ... statement even though mysql_parse() is not called. This is not needed in 5.0 since there the LOAD DATA ... statement is replicated using mysql_parse(), which sets the thd->lex fields correctly. */ thd->lex->sql_command= SQLCOM_LOAD; thd->lex->duplicates= handle_dup; sql_exchange ex((char*)fname, sql_ex.opt_flags & DUMPFILE_FLAG); String field_term(sql_ex.field_term,sql_ex.field_term_len,log_cs); String enclosed(sql_ex.enclosed,sql_ex.enclosed_len,log_cs); String line_term(sql_ex.line_term,sql_ex.line_term_len,log_cs); String line_start(sql_ex.line_start,sql_ex.line_start_len,log_cs); String escaped(sql_ex.escaped,sql_ex.escaped_len, log_cs); ex.field_term= &field_term; ex.enclosed= &enclosed; ex.line_term= &line_term; ex.line_start= &line_start; ex.escaped= &escaped; ex.opt_enclosed = (sql_ex.opt_flags & OPT_ENCLOSED_FLAG); if (sql_ex.empty_flags & FIELD_TERM_EMPTY) ex.field_term->length(0); ex.skip_lines = skip_lines; List field_list; thd->main_lex.select_lex.context.resolve_in_table_list_only(&tables); set_fields(tables.db, field_list, &thd->main_lex.select_lex.context); thd->variables.pseudo_thread_id= thread_id; List set_fields; if (net) { // mysql_load will use thd->net to read the file thd->net.vio = net->vio; /* Make sure the client does not get confused about the packet sequence */ thd->net.pkt_nr = net->pkt_nr; } /* It is safe to use set_fields twice because we are not going to update it inside mysql_load(). */ if (mysql_load(thd, &ex, &tables, field_list, set_fields, set_fields, handle_dup, ignore, net != 0)) thd->query_error= 1; if (thd->cuted_fields) { /* log_pos is the position of the LOAD event in the master log */ sql_print_warning("Slave: load data infile on table '%s' at " "log position %s in log '%s' produced %ld " "warning(s). Default database: '%s'", (char*) table_name, llstr(log_pos,llbuff), RPL_LOG_NAME, (ulong) thd->cuted_fields, print_slave_db_safe(thd->db)); } if (net) net->pkt_nr= thd->net.pkt_nr; } } else { /* We will just ask the master to send us /dev/null if we do not want to load the data. TODO: this a bug - needs to be done in I/O thread */ if (net) skip_load_data_infile(net); } error: thd->net.vio = 0; const char *remember_db= thd->db; VOID(pthread_mutex_lock(&LOCK_thread_count)); thd->catalog= 0; thd->set_db(NULL, 0); /* will free the current database */ thd->query= 0; thd->query_length= 0; VOID(pthread_mutex_unlock(&LOCK_thread_count)); close_thread_tables(thd); if (thd->query_error) { /* this err/sql_errno code is copy-paste from net_send_error() */ const char *err; int sql_errno; if ((err=thd->net.last_error)[0]) sql_errno=thd->net.last_errno; else { sql_errno=ER_UNKNOWN_ERROR; err=ER(sql_errno); } slave_print_error(rli,sql_errno,"\ Error '%s' running LOAD DATA INFILE on table '%s'. Default database: '%s'", err, (char*)table_name, print_slave_db_safe(remember_db)); free_root(thd->mem_root,MYF(MY_KEEP_PREALLOC)); return 1; } free_root(thd->mem_root,MYF(MY_KEEP_PREALLOC)); if (thd->is_fatal_error) { slave_print_error(rli,ER_UNKNOWN_ERROR, "\ Fatal error running LOAD DATA INFILE on table '%s'. Default database: '%s'", (char*)table_name, print_slave_db_safe(remember_db)); return 1; } return ( use_rli_only_for_errors ? 0 : Log_event::exec_event(rli) ); } #endif /************************************************************************** Rotate_log_event methods **************************************************************************/ /* Rotate_log_event::pack_info() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Rotate_log_event::pack_info(Protocol *protocol) { char buf1[256], buf[22]; String tmp(buf1, sizeof(buf1), log_cs); tmp.length(0); tmp.append(new_log_ident, ident_len); tmp.append(STRING_WITH_LEN(";pos=")); tmp.append(llstr(pos,buf)); protocol->store(tmp.ptr(), tmp.length(), &my_charset_bin); } #endif /* Rotate_log_event::print() */ #ifdef MYSQL_CLIENT void Rotate_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { char buf[22]; if (print_event_info->short_form) return; print_header(file, print_event_info); fprintf(file, "\tRotate to "); if (new_log_ident) my_fwrite(file, (byte*) new_log_ident, (uint)ident_len, MYF(MY_NABP | MY_WME)); fprintf(file, " pos: %s", llstr(pos, buf)); fputc('\n', file); fflush(file); } #endif /* MYSQL_CLIENT */ /* Rotate_log_event::Rotate_log_event() (2 constructors) */ #ifndef MYSQL_CLIENT Rotate_log_event::Rotate_log_event(THD* thd_arg, const char* new_log_ident_arg, uint ident_len_arg, ulonglong pos_arg, uint flags_arg) :Log_event(), new_log_ident(new_log_ident_arg), pos(pos_arg),ident_len(ident_len_arg ? ident_len_arg : (uint) strlen(new_log_ident_arg)), flags(flags_arg) { #ifndef DBUG_OFF char buff[22]; DBUG_ENTER("Rotate_log_event::Rotate_log_event(THD*,...)"); DBUG_PRINT("enter",("new_log_ident %s pos %s flags %lu", new_log_ident_arg, llstr(pos_arg, buff), flags)); #endif if (flags & DUP_NAME) new_log_ident= my_strdup_with_length(new_log_ident_arg, ident_len, MYF(MY_WME)); DBUG_VOID_RETURN; } #endif Rotate_log_event::Rotate_log_event(const char* buf, uint event_len, const Format_description_log_event* description_event) :Log_event(buf, description_event) ,new_log_ident(0), flags(DUP_NAME) { DBUG_ENTER("Rotate_log_event::Rotate_log_event(char*,...)"); // The caller will ensure that event_len is what we have at EVENT_LEN_OFFSET uint8 header_size= description_event->common_header_len; uint8 post_header_len= description_event->post_header_len[ROTATE_EVENT-1]; uint ident_offset; if (event_len < header_size) DBUG_VOID_RETURN; buf += header_size; pos = post_header_len ? uint8korr(buf + R_POS_OFFSET) : 4; ident_len = (uint)(event_len - (header_size+post_header_len)); ident_offset = post_header_len; set_if_smaller(ident_len,FN_REFLEN-1); new_log_ident= my_strdup_with_length(buf + ident_offset, (uint) ident_len, MYF(MY_WME)); DBUG_VOID_RETURN; } /* Rotate_log_event::write() */ #ifndef MYSQL_CLIENT bool Rotate_log_event::write(IO_CACHE* file) { char buf[ROTATE_HEADER_LEN]; int8store(buf + R_POS_OFFSET, pos); return (write_header(file, ROTATE_HEADER_LEN + ident_len) || my_b_safe_write(file, (byte*)buf, ROTATE_HEADER_LEN) || my_b_safe_write(file, (byte*)new_log_ident, (uint) ident_len)); } #endif /* Rotate_log_event::exec_event() Got a rotate log event from the master IMPLEMENTATION This is mainly used so that we can later figure out the logname and position for the master. We can't rotate the slave's BINlog as this will cause infinitive rotations in a A -> B -> A setup. The NOTES below is a wrong comment which will disappear when 4.1 is merged. RETURN VALUES 0 ok */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) int Rotate_log_event::exec_event(struct st_relay_log_info* rli) { DBUG_ENTER("Rotate_log_event::exec_event"); pthread_mutex_lock(&rli->data_lock); rli->event_relay_log_pos= my_b_tell(rli->cur_log); /* If we are in a transaction: the only normal case is when the I/O thread was copying a big transaction, then it was stopped and restarted: we have this in the relay log: BEGIN ... ROTATE (a fake one) ... COMMIT or ROLLBACK In that case, we don't want to touch the coordinates which correspond to the beginning of the transaction. Starting from 5.0.0, there also are some rotates from the slave itself, in the relay log. */ if (!(thd->options & OPTION_BEGIN)) { memcpy(rli->group_master_log_name, new_log_ident, ident_len+1); rli->notify_group_master_log_name_update(); rli->group_master_log_pos= pos; rli->group_relay_log_pos= rli->event_relay_log_pos; DBUG_PRINT("info", ("group_master_log_name: '%s' group_master_log_pos:\ %lu", rli->group_master_log_name, (ulong) rli->group_master_log_pos)); /* Reset thd->options and sql_mode etc, because this could be the signal of a master's downgrade from 5.0 to 4.0. However, no need to reset description_event_for_exec: indeed, if the next master is 5.0 (even 5.0.1) we will soon get a Format_desc; if the next master is 4.0 then the events are in the slave's format (conversion). */ set_slave_thread_options(thd); set_slave_thread_default_charset(thd, rli); thd->variables.sql_mode= global_system_variables.sql_mode; thd->variables.auto_increment_increment= thd->variables.auto_increment_offset= 1; } pthread_mutex_unlock(&rli->data_lock); pthread_cond_broadcast(&rli->data_cond); flush_relay_log_info(rli); DBUG_RETURN(0); } #endif /************************************************************************** Intvar_log_event methods **************************************************************************/ /* Intvar_log_event::pack_info() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Intvar_log_event::pack_info(Protocol *protocol) { char buf[256], *pos; pos= strmake(buf, get_var_type_name(), sizeof(buf)-23); *pos++= '='; pos= longlong10_to_str(val, pos, -10); protocol->store(buf, (uint) (pos-buf), &my_charset_bin); } #endif /* Intvar_log_event::Intvar_log_event() */ Intvar_log_event::Intvar_log_event(const char* buf, const Format_description_log_event* description_event) :Log_event(buf, description_event) { buf+= description_event->common_header_len; type= buf[I_TYPE_OFFSET]; val= uint8korr(buf+I_VAL_OFFSET); } /* Intvar_log_event::get_var_type_name() */ const char* Intvar_log_event::get_var_type_name() { switch(type) { case LAST_INSERT_ID_EVENT: return "LAST_INSERT_ID"; case INSERT_ID_EVENT: return "INSERT_ID"; default: /* impossible */ return "UNKNOWN"; } } /* Intvar_log_event::write() */ #ifndef MYSQL_CLIENT bool Intvar_log_event::write(IO_CACHE* file) { byte buf[9]; buf[I_TYPE_OFFSET]= (byte) type; int8store(buf + I_VAL_OFFSET, val); return (write_header(file, sizeof(buf)) || my_b_safe_write(file, buf, sizeof(buf))); } #endif /* Intvar_log_event::print() */ #ifdef MYSQL_CLIENT void Intvar_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { char llbuff[22]; const char *msg; LINT_INIT(msg); if (!print_event_info->short_form) { print_header(file, print_event_info); fprintf(file, "\tIntvar\n"); } fprintf(file, "SET "); switch (type) { case LAST_INSERT_ID_EVENT: msg="LAST_INSERT_ID"; break; case INSERT_ID_EVENT: msg="INSERT_ID"; break; case INVALID_INT_EVENT: default: // cannot happen msg="INVALID_INT"; break; } fprintf(file, "%s=%s;\n", msg, llstr(val,llbuff)); fflush(file); } #endif /* Intvar_log_event::exec_event() */ #if defined(HAVE_REPLICATION)&& !defined(MYSQL_CLIENT) int Intvar_log_event::exec_event(struct st_relay_log_info* rli) { switch (type) { case LAST_INSERT_ID_EVENT: thd->last_insert_id = val; break; case INSERT_ID_EVENT: thd->next_insert_id = val; break; } rli->inc_event_relay_log_pos(); return 0; } #endif /************************************************************************** Rand_log_event methods **************************************************************************/ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Rand_log_event::pack_info(Protocol *protocol) { char buf1[256], *pos; pos= strmov(buf1,"rand_seed1="); pos= int10_to_str((long) seed1, pos, 10); pos= strmov(pos, ",rand_seed2="); pos= int10_to_str((long) seed2, pos, 10); protocol->store(buf1, (uint) (pos-buf1), &my_charset_bin); } #endif Rand_log_event::Rand_log_event(const char* buf, const Format_description_log_event* description_event) :Log_event(buf, description_event) { buf+= description_event->common_header_len; seed1= uint8korr(buf+RAND_SEED1_OFFSET); seed2= uint8korr(buf+RAND_SEED2_OFFSET); } #ifndef MYSQL_CLIENT bool Rand_log_event::write(IO_CACHE* file) { byte buf[16]; int8store(buf + RAND_SEED1_OFFSET, seed1); int8store(buf + RAND_SEED2_OFFSET, seed2); return (write_header(file, sizeof(buf)) || my_b_safe_write(file, buf, sizeof(buf))); } #endif #ifdef MYSQL_CLIENT void Rand_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { char llbuff[22],llbuff2[22]; if (!print_event_info->short_form) { print_header(file, print_event_info); fprintf(file, "\tRand\n"); } fprintf(file, "SET @@RAND_SEED1=%s, @@RAND_SEED2=%s;\n", llstr(seed1, llbuff),llstr(seed2, llbuff2)); fflush(file); } #endif /* MYSQL_CLIENT */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) int Rand_log_event::exec_event(struct st_relay_log_info* rli) { thd->rand.seed1= (ulong) seed1; thd->rand.seed2= (ulong) seed2; rli->inc_event_relay_log_pos(); return 0; } #endif /* !MYSQL_CLIENT */ /************************************************************************** Xid_log_event methods **************************************************************************/ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Xid_log_event::pack_info(Protocol *protocol) { char buf[128], *pos; pos= strmov(buf, "COMMIT /* xid="); pos= longlong10_to_str(xid, pos, 10); pos= strmov(pos, " */"); protocol->store(buf, (uint) (pos-buf), &my_charset_bin); } #endif /* NOTE it's ok not to use int8store here, as long as xid_t::set(ulonglong) and xid_t::get_my_xid doesn't do it either we don't care about actual values of xids as long as identical numbers compare identically */ Xid_log_event:: Xid_log_event(const char* buf, const Format_description_log_event *description_event) :Log_event(buf, description_event) { buf+= description_event->common_header_len; memcpy((char*) &xid, buf, sizeof(xid)); } #ifndef MYSQL_CLIENT bool Xid_log_event::write(IO_CACHE* file) { return write_header(file, sizeof(xid)) || my_b_safe_write(file, (byte*) &xid, sizeof(xid)); } #endif #ifdef MYSQL_CLIENT void Xid_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { if (!print_event_info->short_form) { char buf[64]; longlong10_to_str(xid, buf, 10); print_header(file, print_event_info); fprintf(file, "\tXid = %s\n", buf); fflush(file); } fprintf(file, "COMMIT;\n"); } #endif /* MYSQL_CLIENT */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) int Xid_log_event::exec_event(struct st_relay_log_info* rli) { /* For a slave Xid_log_event is COMMIT */ mysql_log.write(thd,COM_QUERY,"COMMIT /* implicit, from Xid_log_event */"); return end_trans(thd, COMMIT) || Log_event::exec_event(rli); } #endif /* !MYSQL_CLIENT */ /************************************************************************** User_var_log_event methods **************************************************************************/ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void User_var_log_event::pack_info(Protocol* protocol) { char *buf= 0; uint val_offset= 4 + name_len; uint event_len= val_offset; if (is_null) { buf= my_malloc(val_offset + 5, MYF(MY_WME)); strmov(buf + val_offset, "NULL"); event_len= val_offset + 4; } else { switch (type) { case REAL_RESULT: double real_val; float8get(real_val, val); buf= my_malloc(val_offset + FLOATING_POINT_BUFFER, MYF(MY_WME)); event_len+= my_sprintf(buf + val_offset, (buf + val_offset, "%.14g", real_val)); break; case INT_RESULT: buf= my_malloc(val_offset + 22, MYF(MY_WME)); event_len= longlong10_to_str(uint8korr(val), buf + val_offset,-10)-buf; break; case DECIMAL_RESULT: { buf= my_malloc(val_offset + DECIMAL_MAX_STR_LENGTH, MYF(MY_WME)); String str(buf+val_offset, DECIMAL_MAX_STR_LENGTH, &my_charset_bin); my_decimal dec; binary2my_decimal(E_DEC_FATAL_ERROR, val+2, &dec, val[0], val[1]); my_decimal2string(E_DEC_FATAL_ERROR, &dec, 0, 0, 0, &str); event_len= str.length() + val_offset; break; } case STRING_RESULT: /* 15 is for 'COLLATE' and other chars */ buf= my_malloc(event_len+val_len*2+1+2*MY_CS_NAME_SIZE+15, MYF(MY_WME)); CHARSET_INFO *cs; if (!(cs= get_charset(charset_number, MYF(0)))) { strmov(buf+val_offset, "???"); event_len+= 3; } else { char *p= strxmov(buf + val_offset, "_", cs->csname, " ", NullS); p= str_to_hex(p, val, val_len); p= strxmov(p, " COLLATE ", cs->name, NullS); event_len= p-buf; } break; case ROW_RESULT: default: DBUG_ASSERT(1); return; } } buf[0]= '@'; buf[1]= '`'; buf[2+name_len]= '`'; buf[3+name_len]= '='; memcpy(buf+2, name, name_len); protocol->store(buf, event_len, &my_charset_bin); my_free(buf, MYF(MY_ALLOW_ZERO_PTR)); } #endif /* !MYSQL_CLIENT */ User_var_log_event:: User_var_log_event(const char* buf, const Format_description_log_event* description_event) :Log_event(buf, description_event) { buf+= description_event->common_header_len; name_len= uint4korr(buf); name= (char *) buf + UV_NAME_LEN_SIZE; buf+= UV_NAME_LEN_SIZE + name_len; is_null= (bool) *buf; if (is_null) { type= STRING_RESULT; charset_number= my_charset_bin.number; val_len= 0; val= 0; } else { type= (Item_result) buf[UV_VAL_IS_NULL]; charset_number= uint4korr(buf + UV_VAL_IS_NULL + UV_VAL_TYPE_SIZE); val_len= uint4korr(buf + UV_VAL_IS_NULL + UV_VAL_TYPE_SIZE + UV_CHARSET_NUMBER_SIZE); val= (char *) (buf + UV_VAL_IS_NULL + UV_VAL_TYPE_SIZE + UV_CHARSET_NUMBER_SIZE + UV_VAL_LEN_SIZE); } } #ifndef MYSQL_CLIENT bool User_var_log_event::write(IO_CACHE* file) { char buf[UV_NAME_LEN_SIZE]; char buf1[UV_VAL_IS_NULL + UV_VAL_TYPE_SIZE + UV_CHARSET_NUMBER_SIZE + UV_VAL_LEN_SIZE]; char buf2[max(8, DECIMAL_MAX_FIELD_SIZE + 2)], *pos= buf2; uint buf1_length; ulong event_length; int4store(buf, name_len); if ((buf1[0]= is_null)) { buf1_length= 1; val_len= 0; } else { buf1[1]= type; int4store(buf1 + 2, charset_number); switch (type) { case REAL_RESULT: float8store(buf2, *(double*) val); break; case INT_RESULT: int8store(buf2, *(longlong*) val); break; case DECIMAL_RESULT: { my_decimal *dec= (my_decimal *)val; dec->fix_buffer_pointer(); buf2[0]= (char)(dec->intg + dec->frac); buf2[1]= (char)dec->frac; decimal2bin((decimal_t*)val, buf2+2, buf2[0], buf2[1]); val_len= decimal_bin_size(buf2[0], buf2[1]) + 2; break; } case STRING_RESULT: pos= val; break; case ROW_RESULT: default: DBUG_ASSERT(1); return 0; } int4store(buf1 + 2 + UV_CHARSET_NUMBER_SIZE, val_len); buf1_length= 10; } /* Length of the whole event */ event_length= sizeof(buf)+ name_len + buf1_length + val_len; return (write_header(file, event_length) || my_b_safe_write(file, (byte*) buf, sizeof(buf)) || my_b_safe_write(file, (byte*) name, name_len) || my_b_safe_write(file, (byte*) buf1, buf1_length) || my_b_safe_write(file, (byte*) pos, val_len)); } #endif /* User_var_log_event::print() */ #ifdef MYSQL_CLIENT void User_var_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { if (!print_event_info->short_form) { print_header(file, print_event_info); fprintf(file, "\tUser_var\n"); } fprintf(file, "SET @`"); my_fwrite(file, (byte*) name, (uint) (name_len), MYF(MY_NABP | MY_WME)); fprintf(file, "`"); if (is_null) { fprintf(file, ":=NULL;\n"); } else { switch (type) { case REAL_RESULT: double real_val; float8get(real_val, val); fprintf(file, ":=%.14g;\n", real_val); break; case INT_RESULT: char int_buf[22]; longlong10_to_str(uint8korr(val), int_buf, -10); fprintf(file, ":=%s;\n", int_buf); break; case DECIMAL_RESULT: { char str_buf[200]; int str_len= sizeof(str_buf) - 1; int precision= (int)val[0]; int scale= (int)val[1]; decimal_digit_t dec_buf[10]; decimal_t dec; dec.len= 10; dec.buf= dec_buf; bin2decimal(val+2, &dec, precision, scale); decimal2string(&dec, str_buf, &str_len, 0, 0, 0); str_buf[str_len]= 0; fprintf(file, ":=%s;\n",str_buf); break; } case STRING_RESULT: { /* Let's express the string in hex. That's the most robust way. If we print it in character form instead, we need to escape it with character_set_client which we don't know (we will know it in 5.0, but in 4.1 we don't know it easily when we are printing User_var_log_event). Explanation why we would need to bother with character_set_client (quoting Bar): > Note, the parser doesn't switch to another unescaping mode after > it has met a character set introducer. > For example, if an SJIS client says something like: > SET @a= _ucs2 \0a\0b' > the string constant is still unescaped according to SJIS, not > according to UCS2. */ char *hex_str; CHARSET_INFO *cs; if (!(hex_str= (char *)my_alloca(2*val_len+1+2))) // 2 hex digits / byte break; // no error, as we are 'void' str_to_hex(hex_str, val, val_len); /* For proper behaviour when mysqlbinlog|mysql, we need to explicitely specify the variable's collation. It will however cause problems when people want to mysqlbinlog|mysql into another server not supporting the character set. But there's not much to do about this and it's unlikely. */ if (!(cs= get_charset(charset_number, MYF(0)))) /* Generate an unusable command (=> syntax error) is probably the best thing we can do here. */ fprintf(file, ":=???;\n"); else fprintf(file, ":=_%s %s COLLATE `%s`;\n", cs->csname, hex_str, cs->name); my_afree(hex_str); } break; case ROW_RESULT: default: DBUG_ASSERT(1); return; } } fflush(file); } #endif /* User_var_log_event::exec_event() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) int User_var_log_event::exec_event(struct st_relay_log_info* rli) { Item *it= 0; CHARSET_INFO *charset; if (!(charset= get_charset(charset_number, MYF(MY_WME)))) return 1; LEX_STRING user_var_name; user_var_name.str= name; user_var_name.length= name_len; double real_val; longlong int_val; if (is_null) { it= new Item_null(); } else { switch (type) { case REAL_RESULT: float8get(real_val, val); it= new Item_float(real_val); val= (char*) &real_val; // Pointer to value in native format val_len= 8; break; case INT_RESULT: int_val= (longlong) uint8korr(val); it= new Item_int(int_val); val= (char*) &int_val; // Pointer to value in native format val_len= 8; break; case DECIMAL_RESULT: { Item_decimal *dec= new Item_decimal(val+2, val[0], val[1]); it= dec; val= (char *)dec->val_decimal(NULL); val_len= sizeof(my_decimal); break; } case STRING_RESULT: it= new Item_string(val, val_len, charset); break; case ROW_RESULT: default: DBUG_ASSERT(1); return 0; } } Item_func_set_user_var e(user_var_name, it); /* Item_func_set_user_var can't substitute something else on its place => 0 can be passed as last argument (reference on item) */ e.fix_fields(thd, 0); /* A variable can just be considered as a table with a single record and with a single column. Thus, like a column value, it could always have IMPLICIT derivation. */ e.update_hash(val, val_len, type, charset, DERIVATION_IMPLICIT, 0); free_root(thd->mem_root,0); rli->inc_event_relay_log_pos(); return 0; } #endif /* !MYSQL_CLIENT */ /************************************************************************** Slave_log_event methods **************************************************************************/ #ifdef HAVE_REPLICATION #ifdef MYSQL_CLIENT void Unknown_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { if (print_event_info->short_form) return; print_header(file, print_event_info); fputc('\n', file); fprintf(file, "# %s", "Unknown event\n"); } #endif #ifndef MYSQL_CLIENT void Slave_log_event::pack_info(Protocol *protocol) { char buf[256+HOSTNAME_LENGTH], *pos; pos= strmov(buf, "host="); pos= strnmov(pos, master_host, HOSTNAME_LENGTH); pos= strmov(pos, ",port="); pos= int10_to_str((long) master_port, pos, 10); pos= strmov(pos, ",log="); pos= strmov(pos, master_log); pos= strmov(pos, ",pos="); pos= longlong10_to_str(master_pos, pos, 10); protocol->store(buf, pos-buf, &my_charset_bin); } #endif /* !MYSQL_CLIENT */ #ifndef MYSQL_CLIENT Slave_log_event::Slave_log_event(THD* thd_arg, struct st_relay_log_info* rli) :Log_event(thd_arg, 0, 0) , mem_pool(0), master_host(0) { DBUG_ENTER("Slave_log_event"); if (!rli->inited) // QQ When can this happen ? DBUG_VOID_RETURN; MASTER_INFO* mi = rli->mi; // TODO: re-write this better without holding both locks at the same time pthread_mutex_lock(&mi->data_lock); pthread_mutex_lock(&rli->data_lock); master_host_len = strlen(mi->host); master_log_len = strlen(rli->group_master_log_name); // on OOM, just do not initialize the structure and print the error if ((mem_pool = (char*)my_malloc(get_data_size() + 1, MYF(MY_WME)))) { master_host = mem_pool + SL_MASTER_HOST_OFFSET ; memcpy(master_host, mi->host, master_host_len + 1); master_log = master_host + master_host_len + 1; memcpy(master_log, rli->group_master_log_name, master_log_len + 1); master_port = mi->port; master_pos = rli->group_master_log_pos; DBUG_PRINT("info", ("master_log: %s pos: %d", master_log, (ulong) master_pos)); } else sql_print_error("Out of memory while recording slave event"); pthread_mutex_unlock(&rli->data_lock); pthread_mutex_unlock(&mi->data_lock); DBUG_VOID_RETURN; } #endif /* !MYSQL_CLIENT */ Slave_log_event::~Slave_log_event() { my_free(mem_pool, MYF(MY_ALLOW_ZERO_PTR)); } #ifdef MYSQL_CLIENT void Slave_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { char llbuff[22]; if (print_event_info->short_form) return; print_header(file, print_event_info); fputc('\n', file); fprintf(file, "\ Slave: master_host: '%s' master_port: %d master_log: '%s' master_pos: %s\n", master_host, master_port, master_log, llstr(master_pos, llbuff)); } #endif /* MYSQL_CLIENT */ int Slave_log_event::get_data_size() { return master_host_len + master_log_len + 1 + SL_MASTER_HOST_OFFSET; } #ifndef MYSQL_CLIENT bool Slave_log_event::write(IO_CACHE* file) { ulong event_length= get_data_size(); int8store(mem_pool + SL_MASTER_POS_OFFSET, master_pos); int2store(mem_pool + SL_MASTER_PORT_OFFSET, master_port); // log and host are already there return (write_header(file, event_length) || my_b_safe_write(file, (byte*) mem_pool, event_length)); } #endif void Slave_log_event::init_from_mem_pool(int data_size) { master_pos = uint8korr(mem_pool + SL_MASTER_POS_OFFSET); master_port = uint2korr(mem_pool + SL_MASTER_PORT_OFFSET); master_host = mem_pool + SL_MASTER_HOST_OFFSET; master_host_len = strlen(master_host); // safety master_log = master_host + master_host_len + 1; if (master_log > mem_pool + data_size) { master_host = 0; return; } master_log_len = strlen(master_log); } /* This code is not used, so has not been updated to be format-tolerant */ Slave_log_event::Slave_log_event(const char* buf, uint event_len) :Log_event(buf,0) /*unused event*/ ,mem_pool(0),master_host(0) { if (event_len < LOG_EVENT_HEADER_LEN) return; event_len -= LOG_EVENT_HEADER_LEN; if (!(mem_pool = (char*) my_malloc(event_len + 1, MYF(MY_WME)))) return; memcpy(mem_pool, buf + LOG_EVENT_HEADER_LEN, event_len); mem_pool[event_len] = 0; init_from_mem_pool(event_len); } #ifndef MYSQL_CLIENT int Slave_log_event::exec_event(struct st_relay_log_info* rli) { if (mysql_bin_log.is_open()) mysql_bin_log.write(this); return Log_event::exec_event(rli); } #endif /* !MYSQL_CLIENT */ /************************************************************************** Stop_log_event methods **************************************************************************/ /* Stop_log_event::print() */ #ifdef MYSQL_CLIENT void Stop_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { if (print_event_info->short_form) return; print_header(file, print_event_info); fprintf(file, "\tStop\n"); fflush(file); } #endif /* MYSQL_CLIENT */ /* Stop_log_event::exec_event() The master stopped. We used to clean up all temporary tables but this is useless as, as the master has shut down properly, it has written all DROP TEMPORARY TABLE (prepared statements' deletion is TODO only when we binlog prep stmts). We used to clean up slave_load_tmpdir, but this is useless as it has been cleared at the end of LOAD DATA INFILE. So we have nothing to do here. The place were we must do this cleaning is in Start_log_event_v3::exec_event(), not here. Because if we come here, the master was sane. */ #ifndef MYSQL_CLIENT int Stop_log_event::exec_event(struct st_relay_log_info* rli) { /* We do not want to update master_log pos because we get a rotate event before stop, so by now group_master_log_name is set to the next log. If we updated it, we will have incorrect master coordinates and this could give false triggers in MASTER_POS_WAIT() that we have reached the target position when in fact we have not. */ if (thd->options & OPTION_BEGIN) rli->inc_event_relay_log_pos(); else { rli->inc_group_relay_log_pos(0); flush_relay_log_info(rli); } return 0; } #endif /* !MYSQL_CLIENT */ #endif /* HAVE_REPLICATION */ /************************************************************************** Create_file_log_event methods **************************************************************************/ /* Create_file_log_event ctor */ #ifndef MYSQL_CLIENT Create_file_log_event:: Create_file_log_event(THD* thd_arg, sql_exchange* ex, const char* db_arg, const char* table_name_arg, List& fields_arg, enum enum_duplicates handle_dup, bool ignore, char* block_arg, uint block_len_arg, bool using_trans) :Load_log_event(thd_arg,ex,db_arg,table_name_arg,fields_arg,handle_dup, ignore, using_trans), fake_base(0), block(block_arg), event_buf(0), block_len(block_len_arg), file_id(thd_arg->file_id = mysql_bin_log.next_file_id()) { DBUG_ENTER("Create_file_log_event"); sql_ex.force_new_format(); DBUG_VOID_RETURN; } /* Create_file_log_event::write_data_body() */ bool Create_file_log_event::write_data_body(IO_CACHE* file) { bool res; if ((res= Load_log_event::write_data_body(file)) || fake_base) return res; return (my_b_safe_write(file, (byte*) "", 1) || my_b_safe_write(file, (byte*) block, block_len)); } /* Create_file_log_event::write_data_header() */ bool Create_file_log_event::write_data_header(IO_CACHE* file) { bool res; byte buf[CREATE_FILE_HEADER_LEN]; if ((res= Load_log_event::write_data_header(file)) || fake_base) return res; int4store(buf + CF_FILE_ID_OFFSET, file_id); return my_b_safe_write(file, buf, CREATE_FILE_HEADER_LEN) != 0; } /* Create_file_log_event::write_base() */ bool Create_file_log_event::write_base(IO_CACHE* file) { bool res; fake_base= 1; // pretend we are Load event res= write(file); fake_base= 0; return res; } #endif /* !MYSQL_CLIENT */ /* Create_file_log_event ctor */ Create_file_log_event::Create_file_log_event(const char* buf, uint len, const Format_description_log_event* description_event) :Load_log_event(buf,0,description_event),fake_base(0),block(0),inited_from_old(0) { DBUG_ENTER("Create_file_log_event::Create_file_log_event(char*,...)"); uint block_offset; uint header_len= description_event->common_header_len; uint8 load_header_len= description_event->post_header_len[LOAD_EVENT-1]; uint8 create_file_header_len= description_event->post_header_len[CREATE_FILE_EVENT-1]; if (!(event_buf= my_memdup((byte*) buf, len, MYF(MY_WME))) || copy_log_event(event_buf,len, ((buf[EVENT_TYPE_OFFSET] == LOAD_EVENT) ? load_header_len + header_len : (fake_base ? (header_len+load_header_len) : (header_len+load_header_len) + create_file_header_len)), description_event)) DBUG_VOID_RETURN; if (description_event->binlog_version!=1) { file_id= uint4korr(buf + header_len + load_header_len + CF_FILE_ID_OFFSET); /* Note that it's ok to use get_data_size() below, because it is computed with values we have already read from this event (because we called copy_log_event()); we are not using slave's format info to decode master's format, we are really using master's format info. Anyway, both formats should be identical (except the common_header_len) as these Load events are not changed between 4.0 and 5.0 (as logging of LOAD DATA INFILE does not use Load_log_event in 5.0). The + 1 is for \0 terminating fname */ block_offset= (description_event->common_header_len + Load_log_event::get_data_size() + create_file_header_len + 1); if (len < block_offset) return; block = (char*)buf + block_offset; block_len = len - block_offset; } else { sql_ex.force_new_format(); inited_from_old = 1; } DBUG_VOID_RETURN; } /* Create_file_log_event::print() */ #ifdef MYSQL_CLIENT void Create_file_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info, bool enable_local) { if (print_event_info->short_form) { if (enable_local && check_fname_outside_temp_buf()) Load_log_event::print(file, print_event_info); return; } if (enable_local) { Load_log_event::print(file, print_event_info, !check_fname_outside_temp_buf()); /* That one is for "file_id: etc" below: in mysqlbinlog we want the #, in SHOW BINLOG EVENTS we don't. */ fprintf(file, "#"); } fprintf(file, " file_id: %d block_len: %d\n", file_id, block_len); } void Create_file_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { print(file, print_event_info, 0); } #endif /* MYSQL_CLIENT */ /* Create_file_log_event::pack_info() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Create_file_log_event::pack_info(Protocol *protocol) { char buf[NAME_LEN*2 + 30 + 21*2], *pos; pos= strmov(buf, "db="); memcpy(pos, db, db_len); pos= strmov(pos + db_len, ";table="); memcpy(pos, table_name, table_name_len); pos= strmov(pos + table_name_len, ";file_id="); pos= int10_to_str((long) file_id, pos, 10); pos= strmov(pos, ";block_len="); pos= int10_to_str((long) block_len, pos, 10); protocol->store(buf, (uint) (pos-buf), &my_charset_bin); } #endif /* defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) */ /* Create_file_log_event::exec_event() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) int Create_file_log_event::exec_event(struct st_relay_log_info* rli) { char proc_info[17+FN_REFLEN+10], *fname_buf; char *ext; int fd = -1; IO_CACHE file; int error = 1; bzero((char*)&file, sizeof(file)); fname_buf= strmov(proc_info, "Making temp file "); ext= slave_load_file_stem(fname_buf, file_id, server_id, ".info"); thd->proc_info= proc_info; my_delete(fname_buf, MYF(0)); // old copy may exist already if ((fd= my_create(fname_buf, CREATE_MODE, O_WRONLY | O_BINARY | O_EXCL | O_NOFOLLOW, MYF(MY_WME))) < 0 || init_io_cache(&file, fd, IO_SIZE, WRITE_CACHE, (my_off_t)0, 0, MYF(MY_WME|MY_NABP))) { slave_print_error(rli,my_errno, "Error in Create_file event: could not open file '%s'", fname_buf); goto err; } // a trick to avoid allocating another buffer fname= fname_buf; fname_len= (uint) (strmov(ext, ".data") - fname); if (write_base(&file)) { strmov(ext, ".info"); // to have it right in the error message slave_print_error(rli,my_errno, "Error in Create_file event: could not write to file " "'%s'", fname_buf); goto err; } end_io_cache(&file); my_close(fd, MYF(0)); // fname_buf now already has .data, not .info, because we did our trick my_delete(fname_buf, MYF(0)); // old copy may exist already if ((fd= my_create(fname_buf, CREATE_MODE, O_WRONLY | O_BINARY | O_EXCL | O_NOFOLLOW, MYF(MY_WME))) < 0) { slave_print_error(rli,my_errno, "Error in Create_file event: could not open file '%s'", fname_buf); goto err; } if (my_write(fd, (byte*) block, block_len, MYF(MY_WME+MY_NABP))) { slave_print_error(rli,my_errno, "Error in Create_file event: write to '%s' failed", fname_buf); goto err; } error=0; // Everything is ok err: if (error) end_io_cache(&file); if (fd >= 0) my_close(fd, MYF(0)); thd->proc_info= 0; return error ? 1 : Log_event::exec_event(rli); } #endif /* defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) */ /************************************************************************** Append_block_log_event methods **************************************************************************/ /* Append_block_log_event ctor */ #ifndef MYSQL_CLIENT Append_block_log_event::Append_block_log_event(THD* thd_arg, const char* db_arg, char* block_arg, uint block_len_arg, bool using_trans) :Log_event(thd_arg,0, using_trans), block(block_arg), block_len(block_len_arg), file_id(thd_arg->file_id), db(db_arg) { } #endif /* Append_block_log_event ctor */ Append_block_log_event::Append_block_log_event(const char* buf, uint len, const Format_description_log_event* description_event) :Log_event(buf, description_event),block(0) { DBUG_ENTER("Append_block_log_event::Append_block_log_event(char*,...)"); uint8 common_header_len= description_event->common_header_len; uint8 append_block_header_len= description_event->post_header_len[APPEND_BLOCK_EVENT-1]; uint total_header_len= common_header_len+append_block_header_len; if (len < total_header_len) DBUG_VOID_RETURN; file_id= uint4korr(buf + common_header_len + AB_FILE_ID_OFFSET); block= (char*)buf + total_header_len; block_len= len - total_header_len; DBUG_VOID_RETURN; } /* Append_block_log_event::write() */ #ifndef MYSQL_CLIENT bool Append_block_log_event::write(IO_CACHE* file) { byte buf[APPEND_BLOCK_HEADER_LEN]; int4store(buf + AB_FILE_ID_OFFSET, file_id); return (write_header(file, APPEND_BLOCK_HEADER_LEN + block_len) || my_b_safe_write(file, buf, APPEND_BLOCK_HEADER_LEN) || my_b_safe_write(file, (byte*) block, block_len)); } #endif /* Append_block_log_event::print() */ #ifdef MYSQL_CLIENT void Append_block_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { if (print_event_info->short_form) return; print_header(file, print_event_info); fputc('\n', file); fprintf(file, "#%s: file_id: %d block_len: %d\n", get_type_str(), file_id, block_len); } #endif /* MYSQL_CLIENT */ /* Append_block_log_event::pack_info() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Append_block_log_event::pack_info(Protocol *protocol) { char buf[256]; uint length; length= (uint) my_sprintf(buf, (buf, ";file_id=%u;block_len=%u", file_id, block_len)); protocol->store(buf, length, &my_charset_bin); } /* Append_block_log_event::get_create_or_append() */ int Append_block_log_event::get_create_or_append() const { return 0; /* append to the file, fail if not exists */ } /* Append_block_log_event::exec_event() */ int Append_block_log_event::exec_event(struct st_relay_log_info* rli) { char proc_info[17+FN_REFLEN+10], *fname= proc_info+17; int fd; int error = 1; DBUG_ENTER("Append_block_log_event::exec_event"); fname= strmov(proc_info, "Making temp file "); slave_load_file_stem(fname, file_id, server_id, ".data"); thd->proc_info= proc_info; if (get_create_or_append()) { my_delete(fname, MYF(0)); // old copy may exist already if ((fd= my_create(fname, CREATE_MODE, O_WRONLY | O_BINARY | O_EXCL | O_NOFOLLOW, MYF(MY_WME))) < 0) { slave_print_error(rli, my_errno, "Error in %s event: could not create file '%s'", get_type_str(), fname); goto err; } } else if ((fd = my_open(fname, O_WRONLY | O_APPEND | O_BINARY | O_NOFOLLOW, MYF(MY_WME))) < 0) { slave_print_error(rli, my_errno, "Error in %s event: could not open file '%s'", get_type_str(), fname); goto err; } if (my_write(fd, (byte*) block, block_len, MYF(MY_WME+MY_NABP))) { slave_print_error(rli, my_errno, "Error in %s event: write to '%s' failed", get_type_str(), fname); goto err; } error=0; err: if (fd >= 0) my_close(fd, MYF(0)); thd->proc_info= 0; DBUG_RETURN(error ? error : Log_event::exec_event(rli)); } #endif /************************************************************************** Delete_file_log_event methods **************************************************************************/ /* Delete_file_log_event ctor */ #ifndef MYSQL_CLIENT Delete_file_log_event::Delete_file_log_event(THD *thd_arg, const char* db_arg, bool using_trans) :Log_event(thd_arg, 0, using_trans), file_id(thd_arg->file_id), db(db_arg) { } #endif /* Delete_file_log_event ctor */ Delete_file_log_event::Delete_file_log_event(const char* buf, uint len, const Format_description_log_event* description_event) :Log_event(buf, description_event),file_id(0) { uint8 common_header_len= description_event->common_header_len; uint8 delete_file_header_len= description_event->post_header_len[DELETE_FILE_EVENT-1]; if (len < (uint)(common_header_len + delete_file_header_len)) return; file_id= uint4korr(buf + common_header_len + DF_FILE_ID_OFFSET); } /* Delete_file_log_event::write() */ #ifndef MYSQL_CLIENT bool Delete_file_log_event::write(IO_CACHE* file) { byte buf[DELETE_FILE_HEADER_LEN]; int4store(buf + DF_FILE_ID_OFFSET, file_id); return (write_header(file, sizeof(buf)) || my_b_safe_write(file, buf, sizeof(buf))); } #endif /* Delete_file_log_event::print() */ #ifdef MYSQL_CLIENT void Delete_file_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { if (print_event_info->short_form) return; print_header(file, print_event_info); fputc('\n', file); fprintf(file, "#Delete_file: file_id=%u\n", file_id); } #endif /* MYSQL_CLIENT */ /* Delete_file_log_event::pack_info() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Delete_file_log_event::pack_info(Protocol *protocol) { char buf[64]; uint length; length= (uint) my_sprintf(buf, (buf, ";file_id=%u", (uint) file_id)); protocol->store(buf, (int32) length, &my_charset_bin); } #endif /* Delete_file_log_event::exec_event() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) int Delete_file_log_event::exec_event(struct st_relay_log_info* rli) { char fname[FN_REFLEN+10]; char *ext= slave_load_file_stem(fname, file_id, server_id, ".data"); (void) my_delete(fname, MYF(MY_WME)); strmov(ext, ".info"); (void) my_delete(fname, MYF(MY_WME)); return Log_event::exec_event(rli); } #endif /* defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) */ /************************************************************************** Execute_load_log_event methods **************************************************************************/ /* Execute_load_log_event ctor */ #ifndef MYSQL_CLIENT Execute_load_log_event::Execute_load_log_event(THD *thd_arg, const char* db_arg, bool using_trans) :Log_event(thd_arg, 0, using_trans), file_id(thd_arg->file_id), db(db_arg) { } #endif /* Execute_load_log_event ctor */ Execute_load_log_event::Execute_load_log_event(const char* buf, uint len, const Format_description_log_event* description_event) :Log_event(buf, description_event), file_id(0) { uint8 common_header_len= description_event->common_header_len; uint8 exec_load_header_len= description_event->post_header_len[EXEC_LOAD_EVENT-1]; if (len < (uint)(common_header_len+exec_load_header_len)) return; file_id= uint4korr(buf + common_header_len + EL_FILE_ID_OFFSET); } /* Execute_load_log_event::write() */ #ifndef MYSQL_CLIENT bool Execute_load_log_event::write(IO_CACHE* file) { byte buf[EXEC_LOAD_HEADER_LEN]; int4store(buf + EL_FILE_ID_OFFSET, file_id); return (write_header(file, sizeof(buf)) || my_b_safe_write(file, buf, sizeof(buf))); } #endif /* Execute_load_log_event::print() */ #ifdef MYSQL_CLIENT void Execute_load_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { if (print_event_info->short_form) return; print_header(file, print_event_info); fputc('\n', file); fprintf(file, "#Exec_load: file_id=%d\n", file_id); } #endif /* Execute_load_log_event::pack_info() */ #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Execute_load_log_event::pack_info(Protocol *protocol) { char buf[64]; uint length; length= (uint) my_sprintf(buf, (buf, ";file_id=%u", (uint) file_id)); protocol->store(buf, (int32) length, &my_charset_bin); } /* Execute_load_log_event::exec_event() */ int Execute_load_log_event::exec_event(struct st_relay_log_info* rli) { char fname[FN_REFLEN+10]; char *ext; int fd; int error= 1; IO_CACHE file; Load_log_event *lev= 0; ext= slave_load_file_stem(fname, file_id, server_id, ".info"); if ((fd = my_open(fname, O_RDONLY | O_BINARY | O_NOFOLLOW, MYF(MY_WME))) < 0 || init_io_cache(&file, fd, IO_SIZE, READ_CACHE, (my_off_t)0, 0, MYF(MY_WME|MY_NABP))) { slave_print_error(rli,my_errno, "Error in Exec_load event: could not open file '%s'", fname); goto err; } if (!(lev = (Load_log_event*)Log_event::read_log_event(&file, (pthread_mutex_t*)0, rli->relay_log.description_event_for_exec)) || lev->get_type_code() != NEW_LOAD_EVENT) { slave_print_error(rli,0, "Error in Exec_load event: file '%s' appears corrupted", fname); goto err; } lev->thd = thd; /* lev->exec_event should use rli only for errors i.e. should not advance rli's position. lev->exec_event is the place where the table is loaded (it calls mysql_load()). */ rli->future_group_master_log_pos= log_pos; if (lev->exec_event(0,rli,1)) { /* We want to indicate the name of the file that could not be loaded (SQL_LOADxxx). But as we are here we are sure the error is in rli->last_slave_error and rli->last_slave_errno (example of error: duplicate entry for key), so we don't want to overwrite it with the filename. What we want instead is add the filename to the current error message. */ char *tmp= my_strdup(rli->last_slave_error,MYF(MY_WME)); if (tmp) { slave_print_error(rli, rli->last_slave_errno, /* ok to re-use error code */ "%s. Failed executing load from '%s'", tmp, fname); my_free(tmp,MYF(0)); } goto err; } /* We have an open file descriptor to the .info file; we need to close it or Windows will refuse to delete the file in my_delete(). */ if (fd >= 0) { my_close(fd, MYF(0)); end_io_cache(&file); fd= -1; } (void) my_delete(fname, MYF(MY_WME)); memcpy(ext, ".data", 6); (void) my_delete(fname, MYF(MY_WME)); error = 0; err: delete lev; if (fd >= 0) { my_close(fd, MYF(0)); end_io_cache(&file); } return error ? error : Log_event::exec_event(rli); } #endif /* defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) */ /************************************************************************** Begin_load_query_log_event methods **************************************************************************/ #ifndef MYSQL_CLIENT Begin_load_query_log_event:: Begin_load_query_log_event(THD* thd_arg, const char* db_arg, char* block_arg, uint block_len_arg, bool using_trans) :Append_block_log_event(thd_arg, db_arg, block_arg, block_len_arg, using_trans) { file_id= thd_arg->file_id= mysql_bin_log.next_file_id(); } #endif Begin_load_query_log_event:: Begin_load_query_log_event(const char* buf, uint len, const Format_description_log_event* desc_event) :Append_block_log_event(buf, len, desc_event) { } #if defined( HAVE_REPLICATION) && !defined(MYSQL_CLIENT) int Begin_load_query_log_event::get_create_or_append() const { return 1; /* create the file */ } #endif /* defined( HAVE_REPLICATION) && !defined(MYSQL_CLIENT) */ /************************************************************************** Execute_load_query_log_event methods **************************************************************************/ #ifndef MYSQL_CLIENT Execute_load_query_log_event:: Execute_load_query_log_event(THD* thd_arg, const char* query_arg, ulong query_length_arg, uint fn_pos_start_arg, uint fn_pos_end_arg, enum_load_dup_handling dup_handling_arg, bool using_trans, bool suppress_use): Query_log_event(thd_arg, query_arg, query_length_arg, using_trans, suppress_use), file_id(thd_arg->file_id), fn_pos_start(fn_pos_start_arg), fn_pos_end(fn_pos_end_arg), dup_handling(dup_handling_arg) { } #endif /* !MYSQL_CLIENT */ Execute_load_query_log_event:: Execute_load_query_log_event(const char* buf, uint event_len, const Format_description_log_event* desc_event): Query_log_event(buf, event_len, desc_event, EXECUTE_LOAD_QUERY_EVENT), file_id(0), fn_pos_start(0), fn_pos_end(0) { if (!Query_log_event::is_valid()) return; buf+= desc_event->common_header_len; fn_pos_start= uint4korr(buf + ELQ_FN_POS_START_OFFSET); fn_pos_end= uint4korr(buf + ELQ_FN_POS_END_OFFSET); dup_handling= (enum_load_dup_handling)(*(buf + ELQ_DUP_HANDLING_OFFSET)); if (fn_pos_start > q_len || fn_pos_end > q_len || dup_handling > LOAD_DUP_REPLACE) return; file_id= uint4korr(buf + ELQ_FILE_ID_OFFSET); } ulong Execute_load_query_log_event::get_post_header_size_for_derived() { return EXECUTE_LOAD_QUERY_EXTRA_HEADER_LEN; } #ifndef MYSQL_CLIENT bool Execute_load_query_log_event::write_post_header_for_derived(IO_CACHE* file) { char buf[EXECUTE_LOAD_QUERY_EXTRA_HEADER_LEN]; int4store(buf, file_id); int4store(buf + 4, fn_pos_start); int4store(buf + 4 + 4, fn_pos_end); *(buf + 4 + 4 + 4)= (char)dup_handling; return my_b_safe_write(file, (byte*) buf, EXECUTE_LOAD_QUERY_EXTRA_HEADER_LEN); } #endif #ifdef MYSQL_CLIENT void Execute_load_query_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info) { print(file, print_event_info, 0); } void Execute_load_query_log_event::print(FILE* file, PRINT_EVENT_INFO* print_event_info, const char *local_fname) { print_query_header(file, print_event_info); if (local_fname) { my_fwrite(file, (byte*) query, fn_pos_start, MYF(MY_NABP | MY_WME)); fprintf(file, " LOCAL INFILE \'"); fprintf(file, local_fname); fprintf(file, "\'"); if (dup_handling == LOAD_DUP_REPLACE) fprintf(file, " REPLACE"); fprintf(file, " INTO"); my_fwrite(file, (byte*) query + fn_pos_end, q_len-fn_pos_end, MYF(MY_NABP | MY_WME)); fprintf(file, ";\n"); } else { my_fwrite(file, (byte*) query, q_len, MYF(MY_NABP | MY_WME)); fprintf(file, ";\n"); } if (!print_event_info->short_form) fprintf(file, "# file_id: %d \n", file_id); } #endif #if defined(HAVE_REPLICATION) && !defined(MYSQL_CLIENT) void Execute_load_query_log_event::pack_info(Protocol *protocol) { char *buf, *pos; if (!(buf= my_malloc(9 + db_len + q_len + 10 + 21, MYF(MY_WME)))) return; pos= buf; if (db && db_len) { pos= strmov(buf, "use `"); memcpy(pos, db, db_len); pos= strmov(pos+db_len, "`; "); } if (query && q_len) { memcpy(pos, query, q_len); pos+= q_len; } pos= strmov(pos, " ;file_id="); pos= int10_to_str((long) file_id, pos, 10); protocol->store(buf, pos-buf, &my_charset_bin); my_free(buf, MYF(MY_ALLOW_ZERO_PTR)); } int Execute_load_query_log_event::exec_event(struct st_relay_log_info* rli) { char *p; char *buf; char *fname; char *fname_end; int error; /* Replace filename and LOCAL keyword in query before executing it */ if (!(buf = my_malloc(q_len + 1 - (fn_pos_end - fn_pos_start) + (FN_REFLEN + 10) + 10 + 8 + 5, MYF(MY_WME)))) { slave_print_error(rli, my_errno, "Not enough memory"); return 1; } p= buf; memcpy(p, query, fn_pos_start); p+= fn_pos_start; fname= (p= strmake(p, STRING_WITH_LEN(" INFILE \'"))); p= slave_load_file_stem(p, file_id, server_id, ".data"); fname_end= p= strend(p); // Safer than p=p+5 *(p++)='\''; switch (dup_handling) { case LOAD_DUP_IGNORE: p= strmake(p, STRING_WITH_LEN(" IGNORE")); break; case LOAD_DUP_REPLACE: p= strmake(p, STRING_WITH_LEN(" REPLACE")); break; default: /* Ordinary load data */ break; } p= strmake(p, STRING_WITH_LEN(" INTO")); p= strmake(p, query+fn_pos_end, q_len-fn_pos_end); error= Query_log_event::exec_event(rli, buf, p-buf); /* Forging file name for deletion in same buffer */ *fname_end= 0; /* If there was an error the slave is going to stop, leave the file so that we can re-execute this event at START SLAVE. */ if (!error) (void) my_delete(fname, MYF(MY_WME)); my_free(buf, MYF(MY_ALLOW_ZERO_PTR)); return error; } #endif /************************************************************************** sql_ex_info methods **************************************************************************/ /* sql_ex_info::write_data() */ bool sql_ex_info::write_data(IO_CACHE* file) { if (new_format()) { return (write_str(file, field_term, (uint) field_term_len) || write_str(file, enclosed, (uint) enclosed_len) || write_str(file, line_term, (uint) line_term_len) || write_str(file, line_start, (uint) line_start_len) || write_str(file, escaped, (uint) escaped_len) || my_b_safe_write(file,(byte*) &opt_flags,1)); } else { old_sql_ex old_ex; old_ex.field_term= *field_term; old_ex.enclosed= *enclosed; old_ex.line_term= *line_term; old_ex.line_start= *line_start; old_ex.escaped= *escaped; old_ex.opt_flags= opt_flags; old_ex.empty_flags=empty_flags; return my_b_safe_write(file, (byte*) &old_ex, sizeof(old_ex)) != 0; } } /* sql_ex_info::init() */ char* sql_ex_info::init(char* buf,char* buf_end,bool use_new_format) { cached_new_format = use_new_format; if (use_new_format) { empty_flags=0; /* The code below assumes that buf will not disappear from under our feet during the lifetime of the event. This assumption holds true in the slave thread if the log is in new format, but is not the case when we have old format because we will be reusing net buffer to read the actual file before we write out the Create_file event. */ if (read_str(&buf, buf_end, &field_term, &field_term_len) || read_str(&buf, buf_end, &enclosed, &enclosed_len) || read_str(&buf, buf_end, &line_term, &line_term_len) || read_str(&buf, buf_end, &line_start, &line_start_len) || read_str(&buf, buf_end, &escaped, &escaped_len)) return 0; opt_flags = *buf++; } else { field_term_len= enclosed_len= line_term_len= line_start_len= escaped_len=1; field_term = buf++; // Use first byte in string enclosed= buf++; line_term= buf++; line_start= buf++; escaped= buf++; opt_flags = *buf++; empty_flags= *buf++; if (empty_flags & FIELD_TERM_EMPTY) field_term_len=0; if (empty_flags & ENCLOSED_EMPTY) enclosed_len=0; if (empty_flags & LINE_TERM_EMPTY) line_term_len=0; if (empty_flags & LINE_START_EMPTY) line_start_len=0; if (empty_flags & ESCAPED_EMPTY) escaped_len=0; } return buf; }