/* Copyright (C) 2010, 2011 Monty Program Ab This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335 USA */ #include "sql_parse.h" #include #include "sql_select.h" #include "key.h" #include "sql_statistics.h" /**************************************************************************** * Default MRR implementation (MRR to non-MRR converter) ***************************************************************************/ /** Get cost and other information about MRR scan over a known list of ranges Calculate estimated cost and other information about an MRR scan for given sequence of ranges. @param keyno Index number @param seq Range sequence to be traversed @param seq_init_param First parameter for seq->init() @param n_ranges_arg Number of ranges in the sequence, or 0 if the caller can't efficiently determine it @param bufsz INOUT IN: Size of the buffer available for use OUT: Size of the buffer that is expected to be actually used, or 0 if buffer is not needed. @param flags INOUT A combination of HA_MRR_* flags @param cost OUT Estimated cost of MRR access @note This method (or an overriding one in a derived class) must check for thd->killed and return HA_POS_ERROR if it is not zero. This is required for a user to be able to interrupt the calculation by killing the connection/query. @retval HA_POS_ERROR Error or the engine is unable to perform the requested scan. Values of OUT parameters are undefined. @retval other OK, *cost contains cost of the scan, *bufsz and *flags contain scan parameters. */ ha_rows handler::multi_range_read_info_const(uint keyno, RANGE_SEQ_IF *seq, void *seq_init_param, uint n_ranges_arg, uint *bufsz, uint *flags, Cost_estimate *cost) { KEY_MULTI_RANGE range; range_seq_t seq_it; ha_rows rows, total_rows= 0; uint n_ranges=0; THD *thd= table->in_use; uint limit= thd->variables.eq_range_index_dive_limit; bool use_statistics_for_eq_range= eq_ranges_exceeds_limit(seq, seq_init_param, limit); /* Default MRR implementation doesn't need buffer */ *bufsz= 0; seq_it= seq->init(seq_init_param, n_ranges, *flags); while (!seq->next(seq_it, &range)) { if (unlikely(thd->killed != 0)) return HA_POS_ERROR; n_ranges++; key_range *min_endp, *max_endp; if (range.range_flag & GEOM_FLAG) { /* In this case tmp_min_flag contains the handler-read-function */ range.start_key.flag= (ha_rkey_function) (range.range_flag ^ GEOM_FLAG); min_endp= &range.start_key; max_endp= NULL; } else { min_endp= range.start_key.length? &range.start_key : NULL; max_endp= range.end_key.length? &range.end_key : NULL; } int keyparts_used= my_count_bits(range.start_key.keypart_map); if ((range.range_flag & UNIQUE_RANGE) && !(range.range_flag & NULL_RANGE)) rows= 1; /* there can be at most one row */ else if (use_statistics_for_eq_range && !(range.range_flag & NULL_RANGE) && (range.range_flag & EQ_RANGE) && table->key_info[keyno].actual_rec_per_key(keyparts_used - 1) > 0.5) rows= (ha_rows) table->key_info[keyno].actual_rec_per_key(keyparts_used - 1); else { if (HA_POS_ERROR == (rows= this->records_in_range(keyno, min_endp, max_endp))) { /* Can't scan one range => can't do MRR scan at all */ total_rows= HA_POS_ERROR; break; } } total_rows += rows; } if (total_rows != HA_POS_ERROR) { /* The following calculation is the same as in multi_range_read_info(): */ *flags |= HA_MRR_USE_DEFAULT_IMPL; cost->reset(); cost->avg_io_cost= 1; /* assume random seeks */ if ((*flags & HA_MRR_INDEX_ONLY) && total_rows > 2) cost->io_count= keyread_time(keyno, n_ranges, (uint)total_rows); else cost->io_count= read_time(keyno, n_ranges, total_rows); cost->cpu_cost= (double) total_rows / TIME_FOR_COMPARE + 0.01; } return total_rows; } /** Get cost and other information about MRR scan over some sequence of ranges Calculate estimated cost and other information about an MRR scan for some sequence of ranges. The ranges themselves will be known only at execution phase. When this function is called we only know number of ranges and a (rough) E(#records) within those ranges. Currently this function is only called for "n-keypart singlepoint" ranges, i.e. each range is "keypart1=someconst1 AND ... AND keypartN=someconstN" The flags parameter is a combination of those flags: HA_MRR_SORTED, HA_MRR_INDEX_ONLY, HA_MRR_NO_ASSOCIATION, HA_MRR_LIMITS. @param keyno Index number @param n_ranges Estimated number of ranges (i.e. intervals) in the range sequence. @param n_rows Estimated total number of records contained within all of the ranges @param bufsz INOUT IN: Size of the buffer available for use OUT: Size of the buffer that will be actually used, or 0 if buffer is not needed. @param flags INOUT A combination of HA_MRR_* flags @param cost OUT Estimated cost of MRR access @retval 0 OK, *cost contains cost of the scan, *bufsz and *flags contain scan parameters. @retval other Error or can't perform the requested scan */ ha_rows handler::multi_range_read_info(uint keyno, uint n_ranges, uint n_rows, uint key_parts, uint *bufsz, uint *flags, Cost_estimate *cost) { /* Currently we expect this function to be called only in preparation of scan with HA_MRR_SINGLE_POINT property. */ DBUG_ASSERT(*flags | HA_MRR_SINGLE_POINT); *bufsz= 0; /* Default implementation doesn't need a buffer */ *flags |= HA_MRR_USE_DEFAULT_IMPL; cost->reset(); cost->avg_io_cost= 1; /* assume random seeks */ /* Produce the same cost as non-MRR code does */ if (*flags & HA_MRR_INDEX_ONLY) cost->io_count= keyread_time(keyno, n_ranges, n_rows); else cost->io_count= read_time(keyno, n_ranges, n_rows); return 0; } /** Initialize the MRR scan Initialize the MRR scan. This function may do heavyweight scan initialization like row prefetching/sorting/etc (NOTE: but better not do it here as we may not need it, e.g. if we never satisfy WHERE clause on previous tables. For many implementations it would be natural to do such initializations in the first multi_read_range_next() call) mode is a combination of the following flags: HA_MRR_SORTED, HA_MRR_INDEX_ONLY, HA_MRR_NO_ASSOCIATION @param seq Range sequence to be traversed @param seq_init_param First parameter for seq->init() @param n_ranges Number of ranges in the sequence @param mode Flags, see the description section for the details @param buf INOUT: memory buffer to be used @note One must have called index_init() before calling this function. Several multi_range_read_init() calls may be made in course of one query. Buffer memory management is done according to the following scenario: The caller allocates the buffer and provides it to the callee by filling the members of HANDLER_BUFFER structure. The callee consumes all or some fraction of the provided buffer space, and sets the HANDLER_BUFFER members accordingly. The callee may use the buffer memory until the next multi_range_read_init() call is made, all records have been read, or until index_end() call is made, whichever comes first. @retval 0 OK @retval 1 Error */ int handler::multi_range_read_init(RANGE_SEQ_IF *seq_funcs, void *seq_init_param, uint n_ranges, uint mode, HANDLER_BUFFER *buf) { DBUG_ENTER("handler::multi_range_read_init"); mrr_iter= seq_funcs->init(seq_init_param, n_ranges, mode); mrr_funcs= *seq_funcs; mrr_is_output_sorted= MY_TEST(mode & HA_MRR_SORTED); mrr_have_range= FALSE; DBUG_RETURN(0); } /** Get next record in MRR scan Default MRR implementation: read the next record @param range_info OUT Undefined if HA_MRR_NO_ASSOCIATION flag is in effect Otherwise, the opaque value associated with the range that contains the returned record. @retval 0 OK @retval other Error code */ int handler::multi_range_read_next(range_id_t *range_info) { int result= HA_ERR_END_OF_FILE; bool range_res; DBUG_ENTER("handler::multi_range_read_next"); if (!mrr_have_range) { mrr_have_range= TRUE; goto start; } do { /* Save a call if there can be only one row in range. */ if (mrr_cur_range.range_flag != (UNIQUE_RANGE | EQ_RANGE)) { result= read_range_next(); /* On success or non-EOF errors jump to the end. */ if (result != HA_ERR_END_OF_FILE) break; } else { if (ha_was_semi_consistent_read()) { /* The following assignment is redundant, but for extra safety and to remove the compiler warning: */ range_res= FALSE; goto scan_it_again; } /* We need to set this for the last range only, but checking this condition is more expensive than just setting the result code. */ result= HA_ERR_END_OF_FILE; } start: /* Try the next range(s) until one matches a record. */ while (!(range_res= mrr_funcs.next(mrr_iter, &mrr_cur_range))) { scan_it_again: result= read_range_first(mrr_cur_range.start_key.keypart_map ? &mrr_cur_range.start_key : 0, mrr_cur_range.end_key.keypart_map ? &mrr_cur_range.end_key : 0, MY_TEST(mrr_cur_range.range_flag & EQ_RANGE), mrr_is_output_sorted); if (result != HA_ERR_END_OF_FILE) break; } } while ((result == HA_ERR_END_OF_FILE) && !range_res); *range_info= mrr_cur_range.ptr; DBUG_PRINT("exit",("handler::multi_range_read_next result %d", result)); DBUG_RETURN(result); } /**************************************************************************** * Mrr_*_reader classes (building blocks for DS-MRR) ***************************************************************************/ int Mrr_simple_index_reader::init(handler *h_arg, RANGE_SEQ_IF *seq_funcs, void *seq_init_param, uint n_ranges, uint mode, Key_parameters *key_par_arg, Lifo_buffer *key_buffer_arg, Buffer_manager *buf_manager_arg) { HANDLER_BUFFER no_buffer = {NULL, NULL, NULL}; file= h_arg; return file->handler::multi_range_read_init(seq_funcs, seq_init_param, n_ranges, mode, &no_buffer); } int Mrr_simple_index_reader::get_next(range_id_t *range_info) { int res; while (!(res= file->handler::multi_range_read_next(range_info))) { KEY_MULTI_RANGE *curr_range= &file->handler::mrr_cur_range; if (!file->mrr_funcs.skip_index_tuple || !file->mrr_funcs.skip_index_tuple(file->mrr_iter, curr_range->ptr)) break; } if (res && res != HA_ERR_END_OF_FILE && res != HA_ERR_KEY_NOT_FOUND) file->print_error(res, MYF(0)); // Fatal error return res; } /** @brief Get next index record @param range_info OUT identifier of range that the returned record belongs to @note We actually iterate over nested sequences: - an ordered sequence of groups of identical keys - each key group has key value, which has multiple matching records - thus, each record matches all members of the key group @retval 0 OK, next record was successfully read @retval HA_ERR_END_OF_FILE End of records @retval Other Some other error; Error is printed */ int Mrr_ordered_index_reader::get_next(range_id_t *range_info) { int res; DBUG_ENTER("Mrr_ordered_index_reader::get_next"); for(;;) { if (!scanning_key_val_iter) { while ((res= kv_it.init(this))) { if ((res != HA_ERR_KEY_NOT_FOUND && res != HA_ERR_END_OF_FILE)) DBUG_RETURN(res); /* Some fatal error */ if (key_buffer->is_empty()) { DBUG_RETURN(HA_ERR_END_OF_FILE); } } scanning_key_val_iter= TRUE; } if ((res= kv_it.get_next(range_info))) { scanning_key_val_iter= FALSE; if ((res != HA_ERR_KEY_NOT_FOUND && res != HA_ERR_END_OF_FILE)) DBUG_RETURN(res); kv_it.move_to_next_key_value(); continue; } if (!skip_index_tuple(*range_info) && !skip_record(*range_info, NULL)) { break; } /* Go get another (record, range_id) combination */ } /* while */ DBUG_RETURN(0); } /* Supply index reader with the O(1)space it needs for scan interrupt/restore operation */ bool Mrr_ordered_index_reader::set_interruption_temp_buffer(uint rowid_length, uint key_len, uint saved_pk_len, uchar **space_start, uchar *space_end) { if (space_end - *space_start <= (ptrdiff_t)(rowid_length + key_len + saved_pk_len)) return TRUE; support_scan_interruptions= TRUE; saved_rowid= *space_start; *space_start += rowid_length; if (saved_pk_len) { saved_primary_key= *space_start; *space_start += saved_pk_len; } else saved_primary_key= NULL; saved_key_tuple= *space_start; *space_start += key_len; have_saved_rowid= FALSE; read_was_interrupted= FALSE; return FALSE; } void Mrr_ordered_index_reader::set_no_interruption_temp_buffer() { support_scan_interruptions= FALSE; saved_key_tuple= saved_rowid= saved_primary_key= NULL; /* safety */ have_saved_rowid= FALSE; read_was_interrupted= FALSE; } void Mrr_ordered_index_reader::interrupt_read() { DBUG_ASSERT(support_scan_interruptions); TABLE *table= file->get_table(); KEY *used_index= &table->key_info[file->active_index]; /* Save the current key value */ key_copy(saved_key_tuple, table->record[0], used_index, used_index->key_length); if (saved_primary_key) { key_copy(saved_primary_key, table->record[0], &table->key_info[table->s->primary_key], table->key_info[table->s->primary_key].key_length); } read_was_interrupted= TRUE; /* Save the last rowid */ memcpy(saved_rowid, file->ref, file->ref_length); have_saved_rowid= TRUE; } void Mrr_ordered_index_reader::position() { if (have_saved_rowid) memcpy(file->ref, saved_rowid, file->ref_length); else Mrr_index_reader::position(); } void Mrr_ordered_index_reader::resume_read() { TABLE *table= file->get_table(); if (!read_was_interrupted) return; KEY *used_index= &table->key_info[file->active_index]; key_restore(table->record[0], saved_key_tuple, used_index, used_index->key_length); if (saved_primary_key) { key_restore(table->record[0], saved_primary_key, &table->key_info[table->s->primary_key], table->key_info[table->s->primary_key].key_length); } } /** Fill the buffer with (lookup_tuple, range_id) pairs and sort @return 0 OK, the buffer is non-empty and sorted HA_ERR_END_OF_FILE Source exhausted, the buffer is empty. */ int Mrr_ordered_index_reader::refill_buffer(bool initial) { KEY_MULTI_RANGE cur_range; DBUG_ENTER("Mrr_ordered_index_reader::refill_buffer"); DBUG_ASSERT(key_buffer->is_empty()); if (source_exhausted) DBUG_RETURN(HA_ERR_END_OF_FILE); buf_manager->reset_buffer_sizes(buf_manager->arg); key_buffer->reset(); key_buffer->setup_writing(keypar.key_size_in_keybuf, is_mrr_assoc? sizeof(range_id_t) : 0); while (key_buffer->can_write() && !(source_exhausted= mrr_funcs.next(mrr_iter, &cur_range))) { DBUG_ASSERT(cur_range.range_flag & EQ_RANGE); /* Put key, or {key, range_id} pair into the buffer */ key_buffer->write_ptr1= keypar.use_key_pointers ? (uchar*)&cur_range.start_key.key : (uchar*)cur_range.start_key.key; key_buffer->write_ptr2= (uchar*)&cur_range.ptr; key_buffer->write(); } /* Force get_next() to start with kv_it.init() call: */ scanning_key_val_iter= FALSE; if (source_exhausted && key_buffer->is_empty()) DBUG_RETURN(HA_ERR_END_OF_FILE); if (!initial) { /* This is a non-initial buffer fill and we've got a non-empty buffer */ THD *thd= current_thd; status_var_increment(thd->status_var.ha_mrr_key_refills_count); } key_buffer->sort((key_buffer->type() == Lifo_buffer::FORWARD)? (qsort2_cmp)Mrr_ordered_index_reader::compare_keys_reverse : (qsort2_cmp)Mrr_ordered_index_reader::compare_keys, this); DBUG_RETURN(0); } int Mrr_ordered_index_reader::init(handler *h_arg, RANGE_SEQ_IF *seq_funcs, void *seq_init_param, uint n_ranges, uint mode, Key_parameters *key_par_arg, Lifo_buffer *key_buffer_arg, Buffer_manager *buf_manager_arg) { file= h_arg; key_buffer= key_buffer_arg; buf_manager= buf_manager_arg; keypar= *key_par_arg; KEY *key_info= &file->get_table()->key_info[file->active_index]; keypar.index_ranges_unique= MY_TEST(key_info->flags & HA_NOSAME && key_info->user_defined_key_parts == my_count_bits(keypar.key_tuple_map)); mrr_iter= seq_funcs->init(seq_init_param, n_ranges, mode); is_mrr_assoc= !MY_TEST(mode & HA_MRR_NO_ASSOCIATION); mrr_funcs= *seq_funcs; source_exhausted= FALSE; read_was_interrupted= false; have_saved_rowid= FALSE; return 0; } static int rowid_cmp_reverse(void *file, uchar *a, uchar *b) { return - ((handler*)file)->cmp_ref(a, b); } int Mrr_ordered_rndpos_reader::init(handler *h_arg, Mrr_index_reader *index_reader_arg, uint mode, Lifo_buffer *buf) { file= h_arg; index_reader= index_reader_arg; rowid_buffer= buf; is_mrr_assoc= !MY_TEST(mode & HA_MRR_NO_ASSOCIATION); index_reader_exhausted= FALSE; index_reader_needs_refill= TRUE; return 0; } /** DS-MRR: Fill and sort the rowid buffer Scan the MRR ranges and collect ROWIDs (or {ROWID, range_id} pairs) into buffer. When the buffer is full or scan is completed, sort the buffer by rowid and return. When this function returns, either rowid buffer is not empty, or the source of lookup keys (i.e. ranges) is exhaused. @retval 0 OK, the next portion of rowids is in the buffer, properly ordered @retval other Error */ int Mrr_ordered_rndpos_reader::refill_buffer(bool initial) { int res; bool first_call= initial; DBUG_ENTER("Mrr_ordered_rndpos_reader::refill_buffer"); if (index_reader_exhausted) DBUG_RETURN(HA_ERR_END_OF_FILE); while (initial || index_reader_needs_refill || (res= refill_from_index_reader()) == HA_ERR_END_OF_FILE) { if ((res= index_reader->refill_buffer(initial))) { if (res == HA_ERR_END_OF_FILE) index_reader_exhausted= TRUE; break; } initial= FALSE; index_reader_needs_refill= FALSE; } if (!first_call && !index_reader_exhausted) { /* Ok, this was a successful buffer refill operation */ THD *thd= current_thd; status_var_increment(thd->status_var.ha_mrr_rowid_refills_count); } DBUG_RETURN(res); } void Mrr_index_reader::position() { file->position(file->get_table()->record[0]); } /* @brief Try to refill the rowid buffer without calling index_reader->refill_buffer(). */ int Mrr_ordered_rndpos_reader::refill_from_index_reader() { range_id_t range_info; int res; DBUG_ENTER("Mrr_ordered_rndpos_reader::refill_from_index_reader"); DBUG_ASSERT(rowid_buffer->is_empty()); index_rowid= index_reader->get_rowid_ptr(); rowid_buffer->reset(); rowid_buffer->setup_writing(file->ref_length, is_mrr_assoc? sizeof(range_id_t) : 0); last_identical_rowid= NULL; index_reader->resume_read(); while (rowid_buffer->can_write()) { res= index_reader->get_next(&range_info); if (res) { if (res != HA_ERR_END_OF_FILE) DBUG_RETURN(res); index_reader_needs_refill=TRUE; break; } index_reader->position(); /* Put rowid, or {rowid, range_id} pair into the buffer */ rowid_buffer->write_ptr1= index_rowid; rowid_buffer->write_ptr2= (uchar*)&range_info; rowid_buffer->write(); } /* When index_reader_needs_refill=TRUE, this means we've got all of index tuples for lookups keys that index_reader had. We are not in the middle of an index read, so there is no need to call interrupt_read. Actually, we must not call interrupt_read(), because it could be that we haven't read a single row (because all index lookups returned HA_ERR_KEY_NOT_FOUND). In this case, interrupt_read() will cause [harmless] valgrind warnings when trying to save garbage from table->record[0]. */ if (!index_reader_needs_refill) index_reader->interrupt_read(); /* Sort the buffer contents by rowid */ rowid_buffer->sort((qsort2_cmp)rowid_cmp_reverse, (void*)file); rowid_buffer->setup_reading(file->ref_length, is_mrr_assoc ? sizeof(range_id_t) : 0); DBUG_RETURN(rowid_buffer->is_empty()? HA_ERR_END_OF_FILE : 0); } /* Get the next {record, range_id} using ordered array of rowid+range_id pairs @note Since we have sorted rowids, we try not to make multiple rnd_pos() calls with the same rowid value. */ int Mrr_ordered_rndpos_reader::get_next(range_id_t *range_info) { int res; /* First, check if rowid buffer has elements with the same rowid value as the previous. */ while (last_identical_rowid) { /* Current record (the one we've returned in previous call) was obtained from a rowid that matched multiple range_ids. Return this record again, with next matching range_id. */ (void)rowid_buffer->read(); if (rowid_buffer->read_ptr1 == last_identical_rowid) last_identical_rowid= NULL; /* reached the last of identical rowids */ if (!is_mrr_assoc) return 0; memcpy(range_info, rowid_buffer->read_ptr2, sizeof(range_id_t)); if (!index_reader->skip_record(*range_info, rowid_buffer->read_ptr1)) return 0; } /* Ok, last_identical_rowid==NULL, it's time to read next different rowid value and get record for it. */ for(;;) { /* Return eof if there are no rowids in the buffer after re-fill attempt */ if (rowid_buffer->read()) return HA_ERR_END_OF_FILE; if (is_mrr_assoc) { memcpy(range_info, rowid_buffer->read_ptr2, sizeof(range_id_t)); if (index_reader->skip_record(*range_info, rowid_buffer->read_ptr1)) continue; } res= file->ha_rnd_pos(file->get_table()->record[0], rowid_buffer->read_ptr1); if (res == HA_ERR_RECORD_DELETED) { /* not likely to get this code with current storage engines, but still */ continue; } if (res) return res; /* Some fatal error */ break; /* Got another record */ } /* Check if subsequent buffer elements have the same rowid value as this one. If yes, remember this fact so that we don't make any more rnd_pos() calls with this value. Note: this implies that SQL layer doesn't touch table->record[0] between calls. */ Lifo_buffer_iterator it; it.init(rowid_buffer); while (!it.read()) { if (file->cmp_ref(it.read_ptr1, rowid_buffer->read_ptr1)) break; last_identical_rowid= it.read_ptr1; } return 0; } /**************************************************************************** * Top-level DS-MRR implementation functions (the ones called by storage engine) ***************************************************************************/ /** DS-MRR: Initialize and start MRR scan Initialize and start the MRR scan. Depending on the mode parameter, this may use default or DS-MRR implementation. @param h_arg Table handler to be used @param key Index to be used @param seq_funcs Interval sequence enumeration functions @param seq_init_param Interval sequence enumeration parameter @param n_ranges Number of ranges in the sequence. @param mode HA_MRR_* modes to use @param buf INOUT Buffer to use @retval 0 Ok, Scan started. @retval other Error */ int DsMrr_impl::dsmrr_init(handler *h_arg, RANGE_SEQ_IF *seq_funcs, void *seq_init_param, uint n_ranges, uint mode, HANDLER_BUFFER *buf) { THD *thd= h_arg->get_table()->in_use; int res; Key_parameters keypar; uint UNINIT_VAR(key_buff_elem_size); /* set/used when do_sort_keys==TRUE */ handler *h_idx; Mrr_ordered_rndpos_reader *disk_strategy= NULL; bool do_sort_keys= FALSE; DBUG_ENTER("DsMrr_impl::dsmrr_init"); /* index_merge may invoke a scan on an object for which dsmrr_info[_const] has not been called, so set the owner handler here as well. */ primary_file= h_arg; is_mrr_assoc= !MY_TEST(mode & HA_MRR_NO_ASSOCIATION); strategy_exhausted= FALSE; /* By default, have do-nothing buffer manager */ buf_manager.arg= this; buf_manager.reset_buffer_sizes= do_nothing; buf_manager.redistribute_buffer_space= do_nothing; if (mode & (HA_MRR_USE_DEFAULT_IMPL | HA_MRR_SORTED)) goto use_default_impl; /* Determine whether we'll need to do key sorting and/or rnd_pos() scan */ index_strategy= NULL; if ((mode & HA_MRR_SINGLE_POINT) && optimizer_flag(thd, OPTIMIZER_SWITCH_MRR_SORT_KEYS)) { do_sort_keys= TRUE; index_strategy= &reader_factory.ordered_index_reader; } else index_strategy= &reader_factory.simple_index_reader; strategy= index_strategy; /* We don't need a rowid-to-rndpos step if - We're doing a scan on clustered primary key - [In the future] We're doing an index_only read */ DBUG_ASSERT(primary_file->inited == handler::INDEX || (primary_file->inited == handler::RND && secondary_file && secondary_file->inited == handler::INDEX)); h_idx= (primary_file->inited == handler::INDEX)? primary_file: secondary_file; keyno= h_idx->active_index; if (!(keyno == table->s->primary_key && h_idx->primary_key_is_clustered())) { strategy= disk_strategy= &reader_factory.ordered_rndpos_reader; } full_buf= buf->buffer; full_buf_end= buf->buffer_end; if (do_sort_keys) { /* Pre-calculate some parameters of key sorting */ keypar.use_key_pointers= MY_TEST(mode & HA_MRR_MATERIALIZED_KEYS); seq_funcs->get_key_info(seq_init_param, &keypar.key_tuple_length, &keypar.key_tuple_map); keypar.key_size_in_keybuf= keypar.use_key_pointers? sizeof(char*) : keypar.key_tuple_length; key_buff_elem_size= keypar.key_size_in_keybuf + (int)is_mrr_assoc * sizeof(void*); /* Ordered index reader needs some space to store an index tuple */ if (strategy != index_strategy) { uint saved_pk_length=0; if (h_idx->primary_key_is_clustered()) { uint pk= h_idx->get_table()->s->primary_key; if (pk != MAX_KEY) saved_pk_length= h_idx->get_table()->key_info[pk].key_length; } KEY *used_index= &h_idx->get_table()->key_info[h_idx->active_index]; if (reader_factory.ordered_index_reader. set_interruption_temp_buffer(primary_file->ref_length, used_index->key_length, saved_pk_length, &full_buf, full_buf_end)) goto use_default_impl; } else reader_factory.ordered_index_reader.set_no_interruption_temp_buffer(); } if (strategy == index_strategy) { /* Index strategy alone handles the record retrieval. Give all buffer space to it. Key buffer should have forward orientation so we can return the end of it. */ key_buffer= &forward_key_buf; key_buffer->set_buffer_space(full_buf, full_buf_end); /* Safety: specify that rowid buffer has zero size: */ rowid_buffer.set_buffer_space(full_buf_end, full_buf_end); if (do_sort_keys && !key_buffer->have_space_for(key_buff_elem_size)) goto use_default_impl; if ((res= index_strategy->init(primary_file, seq_funcs, seq_init_param, n_ranges, mode, &keypar, key_buffer, &buf_manager))) goto error; } else { /* We'll have both index and rndpos strategies working together */ if (do_sort_keys) { /* Both strategies will need buffer space, share the buffer */ if (setup_buffer_sharing(keypar.key_size_in_keybuf, keypar.key_tuple_map)) goto use_default_impl; buf_manager.reset_buffer_sizes= reset_buffer_sizes; buf_manager.redistribute_buffer_space= redistribute_buffer_space; } else { /* index strategy doesn't need buffer, give all space to rowids*/ rowid_buffer.set_buffer_space(full_buf, full_buf_end); if (!rowid_buffer.have_space_for(primary_file->ref_length + (int)is_mrr_assoc * sizeof(range_id_t))) goto use_default_impl; } if ((res= setup_two_handlers())) goto error; if ((res= index_strategy->init(secondary_file, seq_funcs, seq_init_param, n_ranges, mode, &keypar, key_buffer, &buf_manager)) || (res= disk_strategy->init(primary_file, index_strategy, mode, &rowid_buffer))) { goto error; } } /* At this point, we're sure that we're running a native MRR scan (i.e. we didnt fall back to default implementation for some reason). */ status_var_increment(thd->status_var.ha_mrr_init_count); res= strategy->refill_buffer(TRUE); if (res) { if (res != HA_ERR_END_OF_FILE) goto error; strategy_exhausted= TRUE; } /* If we have scanned through all intervals in *seq, then adjust *buf to indicate that the remaining buffer space will not be used. */ // if (dsmrr_eof) // buf->end_of_used_area= rowid_buffer.end_of_space(); DBUG_RETURN(0); error: close_second_handler(); /* Safety, not really needed but: */ strategy= NULL; DBUG_RETURN(res); use_default_impl: if (primary_file->inited != handler::INDEX) { /* We can get here when - we've previously successfully done a DS-MRR scan (and so have secondary_file!= NULL, secondary_file->inited= INDEX, primary_file->inited=RND) - for this invocation, we haven't got enough buffer space, and so we have to use the default MRR implementation. note: primary_file->ha_index_end() will call dsmrr_close() which will close/destroy the secondary_file, this is intentional. (Yes this is slow, but one can't expect performance with join buffer so small that it can accomodate one rowid and one index tuple) */ if ((res= primary_file->ha_rnd_end()) || (res= primary_file->ha_index_init(keyno, MY_TEST(mode & HA_MRR_SORTED)))) { DBUG_RETURN(res); } } /* Call correct init function and assign to top level object */ Mrr_simple_index_reader *s= &reader_factory.simple_index_reader; res= s->init(primary_file, seq_funcs, seq_init_param, n_ranges, mode, NULL, NULL, NULL); strategy= s; DBUG_RETURN(res); } /* Whatever the current state is, make it so that we have two handler objects: - primary_file - initialized for rnd_pos() scan - secondary_file - initialized for scanning the index specified in this->keyno RETURN 0 OK HA_XXX Error code */ int DsMrr_impl::setup_two_handlers() { int res; THD *thd= primary_file->get_table()->in_use; DBUG_ENTER("DsMrr_impl::setup_two_handlers"); if (!secondary_file) { handler *new_h2; Item *pushed_cond= NULL; DBUG_ASSERT(primary_file->inited == handler::INDEX); /* Create a separate handler object to do rnd_pos() calls. */ /* ::clone() takes up a lot of stack, especially on 64 bit platforms. The constant 5 is an empiric result. */ if (check_stack_overrun(thd, 5*STACK_MIN_SIZE, (uchar*) &new_h2)) DBUG_RETURN(1); /* Create a separate handler object to do rnd_pos() calls. */ if (!(new_h2= primary_file->clone(primary_file->get_table()->s-> normalized_path.str, thd->mem_root)) || new_h2->ha_external_lock(thd, F_RDLCK)) { delete new_h2; DBUG_RETURN(1); } if (keyno == primary_file->pushed_idx_cond_keyno) pushed_cond= primary_file->pushed_idx_cond; Mrr_reader *save_strategy= strategy; strategy= NULL; /* Caution: this call will invoke this->dsmrr_close(). Do not put the created secondary table handler new_h2 into this->secondary_file or it will delete it. Also, save the picked strategy */ res= primary_file->ha_index_end(); strategy= save_strategy; secondary_file= new_h2; if (res || (res= (primary_file->ha_rnd_init(FALSE)))) goto error; table->prepare_for_position(); secondary_file->extra(HA_EXTRA_KEYREAD); secondary_file->mrr_iter= primary_file->mrr_iter; if ((res= secondary_file->ha_index_init(keyno, FALSE))) goto error; if (pushed_cond) secondary_file->idx_cond_push(keyno, pushed_cond); } else { DBUG_ASSERT(secondary_file && secondary_file->inited==handler::INDEX); /* We get here when the access alternates betwen MRR scan(s) and non-MRR scans. Calling primary_file->index_end() will invoke dsmrr_close() for this object, which will delete secondary_file. We need to keep it, so put it away and dont let it be deleted: */ if (primary_file->inited == handler::INDEX) { handler *save_h2= secondary_file; Mrr_reader *save_strategy= strategy; secondary_file= NULL; strategy= NULL; res= primary_file->ha_index_end(); secondary_file= save_h2; strategy= save_strategy; if (res) goto error; } if ((primary_file->inited != handler::RND) && (res= primary_file->ha_rnd_init(FALSE))) goto error; } DBUG_RETURN(0); error: DBUG_RETURN(res); } void DsMrr_impl::close_second_handler() { if (secondary_file) { secondary_file->extra(HA_EXTRA_NO_KEYREAD); secondary_file->ha_index_or_rnd_end(); secondary_file->ha_external_lock(current_thd, F_UNLCK); secondary_file->ha_close(); delete secondary_file; secondary_file= NULL; } } void DsMrr_impl::dsmrr_close() { DBUG_ENTER("DsMrr_impl::dsmrr_close"); close_second_handler(); strategy= NULL; DBUG_VOID_RETURN; } /* my_qsort2-compatible static member function to compare key tuples */ int Mrr_ordered_index_reader::compare_keys(void* arg, uchar* key1_arg, uchar* key2_arg) { Mrr_ordered_index_reader *reader= (Mrr_ordered_index_reader*)arg; TABLE *table= reader->file->get_table(); KEY_PART_INFO *part= table->key_info[reader->file->active_index].key_part; uchar *key1, *key2; if (reader->keypar.use_key_pointers) { /* the buffer stores pointers to keys, get to the keys */ memcpy(&key1, key1_arg, sizeof(char*)); memcpy(&key2, key2_arg, sizeof(char*)); } else { key1= key1_arg; key2= key2_arg; } return key_tuple_cmp(part, key1, key2, reader->keypar.key_tuple_length); } int Mrr_ordered_index_reader::compare_keys_reverse(void* arg, uchar* key1, uchar* key2) { return -compare_keys(arg, key1, key2); } /** Set the buffer space to be shared between rowid and key buffer @return FALSE ok @return TRUE There is so little buffer space that we won't be able to use the strategy. This happens when we don't have enough space for one rowid element and one key element so this is mainly targeted at testing. */ bool DsMrr_impl::setup_buffer_sharing(uint key_size_in_keybuf, key_part_map key_tuple_map) { long key_buff_elem_size= key_size_in_keybuf + (int)is_mrr_assoc * sizeof(range_id_t); KEY *key_info= &primary_file->get_table()->key_info[keyno]; /* Ok if we got here we need to allocate one part of the buffer for keys and another part for rowids. */ ulonglong rowid_buf_elem_size= primary_file->ref_length + (int)is_mrr_assoc * sizeof(range_id_t); /* Use rec_per_key statistics as a basis to find out how many rowids we'll get for each key value. TODO: what should be the default value to use when there is no statistics? */ uint parts= my_count_bits(key_tuple_map); ha_rows rpc; ulonglong rowids_size= rowid_buf_elem_size; if ((rpc= (ha_rows) key_info->actual_rec_per_key(parts - 1))) rowids_size= rowid_buf_elem_size * rpc; double fraction_for_rowids= (ulonglong2double(rowids_size) / (ulonglong2double(rowids_size) + key_buff_elem_size)); ptrdiff_t bytes_for_rowids= (ptrdiff_t)floor(0.5 + fraction_for_rowids * (full_buf_end - full_buf)); ptrdiff_t bytes_for_keys= (full_buf_end - full_buf) - bytes_for_rowids; if (bytes_for_keys < key_buff_elem_size + 1 || bytes_for_rowids < (ptrdiff_t)rowid_buf_elem_size + 1) return TRUE; /* Failed to provide minimum space for one of the buffers */ rowid_buffer_end= full_buf + bytes_for_rowids; rowid_buffer.set_buffer_space(full_buf, rowid_buffer_end); key_buffer= &backward_key_buf; key_buffer->set_buffer_space(rowid_buffer_end, full_buf_end); /* The above code guarantees that the buffers are big enough */ DBUG_ASSERT(key_buffer->have_space_for(key_buff_elem_size) && rowid_buffer.have_space_for((size_t)rowid_buf_elem_size)); return FALSE; } void DsMrr_impl::do_nothing(void *dsmrr_arg) { /* Do nothing */ } void DsMrr_impl::reset_buffer_sizes(void *dsmrr_arg) { DsMrr_impl *dsmrr= (DsMrr_impl*)dsmrr_arg; dsmrr->rowid_buffer.set_buffer_space(dsmrr->full_buf, dsmrr->rowid_buffer_end); dsmrr->key_buffer->set_buffer_space(dsmrr->rowid_buffer_end, dsmrr->full_buf_end); } /* Take unused space from the key buffer and give it to the rowid buffer */ void DsMrr_impl::redistribute_buffer_space(void *dsmrr_arg) { DsMrr_impl *dsmrr= (DsMrr_impl*)dsmrr_arg; uchar *unused_start, *unused_end; dsmrr->key_buffer->remove_unused_space(&unused_start, &unused_end); dsmrr->rowid_buffer.grow(unused_start, unused_end); } /* @brief Initialize the iterator @note Initialize the iterator to produce matches for the key of the first element in owner_arg->key_buffer @retval 0 OK @retval HA_ERR_END_OF_FILE Either the owner->key_buffer is empty or no matches for the key we've tried (check key_buffer->is_empty() to tell these apart) @retval other code Fatal error */ int Key_value_records_iterator::init(Mrr_ordered_index_reader *owner_arg) { int res; owner= owner_arg; identical_key_it.init(owner->key_buffer); owner->key_buffer->setup_reading(owner->keypar.key_size_in_keybuf, owner->is_mrr_assoc ? sizeof(void*) : 0); if (identical_key_it.read()) return HA_ERR_END_OF_FILE; uchar *key_in_buf= last_identical_key_ptr= identical_key_it.read_ptr1; uchar *index_tuple= key_in_buf; if (owner->keypar.use_key_pointers) memcpy(&index_tuple, key_in_buf, sizeof(char*)); /* Check out how many more identical keys are following */ while (!identical_key_it.read()) { if (Mrr_ordered_index_reader::compare_keys(owner, key_in_buf, identical_key_it.read_ptr1)) break; last_identical_key_ptr= identical_key_it.read_ptr1; } identical_key_it.init(owner->key_buffer); res= owner->file->ha_index_read_map(owner->file->get_table()->record[0], index_tuple, owner->keypar.key_tuple_map, HA_READ_KEY_EXACT); if (res) { /* Failed to find any matching records */ move_to_next_key_value(); return res; } owner->have_saved_rowid= FALSE; get_next_row= FALSE; return 0; } int Key_value_records_iterator::get_next(range_id_t *range_info) { int res; if (get_next_row) { if (owner->keypar.index_ranges_unique) { /* We're using a full unique key, no point to call index_next_same */ return HA_ERR_END_OF_FILE; } handler *h= owner->file; uchar *lookup_key; if (owner->keypar.use_key_pointers) memcpy(&lookup_key, identical_key_it.read_ptr1, sizeof(void*)); else lookup_key= identical_key_it.read_ptr1; if ((res= h->ha_index_next_same(h->get_table()->record[0], lookup_key, owner->keypar.key_tuple_length))) { /* It's either HA_ERR_END_OF_FILE or some other error */ return res; } identical_key_it.init(owner->key_buffer); owner->have_saved_rowid= FALSE; get_next_row= FALSE; } identical_key_it.read(); /* This gets us next range_id */ memcpy(range_info, identical_key_it.read_ptr2, sizeof(range_id_t)); if (!last_identical_key_ptr || (identical_key_it.read_ptr1 == last_identical_key_ptr)) { /* We've reached the last of the identical keys that current record is a match for. Set get_next_row=TRUE so that we read the next index record on the next call to this function. */ get_next_row= TRUE; } return 0; } void Key_value_records_iterator::move_to_next_key_value() { while (!owner->key_buffer->read() && (owner->key_buffer->read_ptr1 != last_identical_key_ptr)) {} } /** DS-MRR implementation: multi_range_read_next() function. Calling convention is like multi_range_read_next() has. */ int DsMrr_impl::dsmrr_next(range_id_t *range_info) { int res; if (strategy_exhausted) return HA_ERR_END_OF_FILE; while ((res= strategy->get_next(range_info)) == HA_ERR_END_OF_FILE) { if ((res= strategy->refill_buffer(FALSE))) break; /* EOF or error */ } return res; } /** DS-MRR implementation: multi_range_read_info() function */ ha_rows DsMrr_impl::dsmrr_info(uint keyno, uint n_ranges, uint rows, uint key_parts, uint *bufsz, uint *flags, Cost_estimate *cost) { ha_rows res __attribute__((unused)); uint def_flags= *flags; uint def_bufsz= *bufsz; /* Get cost/flags/mem_usage of default MRR implementation */ res= primary_file->handler::multi_range_read_info(keyno, n_ranges, rows, key_parts, &def_bufsz, &def_flags, cost); DBUG_ASSERT(!res); if ((*flags & HA_MRR_USE_DEFAULT_IMPL) || choose_mrr_impl(keyno, rows, flags, bufsz, cost)) { /* Default implementation is choosen */ DBUG_PRINT("info", ("Default MRR implementation choosen")); *flags= def_flags; *bufsz= def_bufsz; } else { /* *flags and *bufsz were set by choose_mrr_impl */ DBUG_PRINT("info", ("DS-MRR implementation choosen")); } return 0; } /** DS-MRR Implementation: multi_range_read_info_const() function */ ha_rows DsMrr_impl::dsmrr_info_const(uint keyno, RANGE_SEQ_IF *seq, void *seq_init_param, uint n_ranges, uint *bufsz, uint *flags, Cost_estimate *cost) { ha_rows rows; uint def_flags= *flags; uint def_bufsz= *bufsz; /* Get cost/flags/mem_usage of default MRR implementation */ rows= primary_file->handler::multi_range_read_info_const(keyno, seq, seq_init_param, n_ranges, &def_bufsz, &def_flags, cost); if (rows == HA_POS_ERROR) { /* Default implementation can't perform MRR scan => we can't either */ return rows; } /* If HA_MRR_USE_DEFAULT_IMPL has been passed to us, that is an order to use the default MRR implementation (we need it for UPDATE/DELETE). Otherwise, make a choice based on cost and @@optimizer_switch settings */ if ((*flags & HA_MRR_USE_DEFAULT_IMPL) || choose_mrr_impl(keyno, rows, flags, bufsz, cost)) { DBUG_PRINT("info", ("Default MRR implementation choosen")); *flags= def_flags; *bufsz= def_bufsz; } else { /* *flags and *bufsz were set by choose_mrr_impl */ DBUG_PRINT("info", ("DS-MRR implementation choosen")); } return rows; } /** Check if key has partially-covered columns We can't use DS-MRR to perform range scans when the ranges are over partially-covered keys, because we'll not have full key part values (we'll have their prefixes from the index) and will not be able to check if we've reached the end the range. @param keyno Key to check @todo Allow use of DS-MRR in cases where the index has partially-covered components but they are not used for scanning. @retval TRUE Yes @retval FALSE No */ bool key_uses_partial_cols(TABLE_SHARE *share, uint keyno) { KEY_PART_INFO *kp= share->key_info[keyno].key_part; KEY_PART_INFO *kp_end= kp + share->key_info[keyno].user_defined_key_parts; for (; kp != kp_end; kp++) { if (!kp->field->part_of_key.is_set(keyno)) return TRUE; } return FALSE; } /* Check if key/flags allow DS-MRR/CPK strategy to be used @param thd @param keyno Index that will be used @param mrr_flags @retval TRUE DS-MRR/CPK should be used @retval FALSE Otherwise */ bool DsMrr_impl::check_cpk_scan(THD *thd, TABLE_SHARE *share, uint keyno, uint mrr_flags) { return MY_TEST((mrr_flags & HA_MRR_SINGLE_POINT) && keyno == share->primary_key && primary_file->primary_key_is_clustered() && optimizer_flag(thd, OPTIMIZER_SWITCH_MRR_SORT_KEYS)); } /* DS-MRR Internals: Choose between Default MRR implementation and DS-MRR Make the choice between using Default MRR implementation and DS-MRR. This function contains common functionality factored out of dsmrr_info() and dsmrr_info_const(). The function assumes that the default MRR implementation's applicability requirements are satisfied. @param keyno Index number @param rows E(full rows to be retrieved) @param flags IN MRR flags provided by the MRR user OUT If DS-MRR is choosen, flags of DS-MRR implementation else the value is not modified @param bufsz IN If DS-MRR is choosen, buffer use of DS-MRR implementation else the value is not modified @param cost IN Cost of default MRR implementation OUT If DS-MRR is choosen, cost of DS-MRR scan else the value is not modified @retval TRUE Default MRR implementation should be used @retval FALSE DS-MRR implementation should be used */ bool DsMrr_impl::choose_mrr_impl(uint keyno, ha_rows rows, uint *flags, uint *bufsz, Cost_estimate *cost) { Cost_estimate dsmrr_cost; bool res; THD *thd= primary_file->get_table()->in_use; TABLE_SHARE *share= primary_file->get_table_share(); bool doing_cpk_scan= check_cpk_scan(thd, share, keyno, *flags); bool using_cpk= MY_TEST(keyno == share->primary_key && primary_file->primary_key_is_clustered()); *flags &= ~HA_MRR_IMPLEMENTATION_FLAGS; if (!optimizer_flag(thd, OPTIMIZER_SWITCH_MRR) || *flags & HA_MRR_INDEX_ONLY || (using_cpk && !doing_cpk_scan) || key_uses_partial_cols(share, keyno)) { /* Use the default implementation */ *flags |= HA_MRR_USE_DEFAULT_IMPL; *flags &= ~HA_MRR_IMPLEMENTATION_FLAGS; return TRUE; } uint add_len= share->key_info[keyno].key_length + primary_file->ref_length; *bufsz -= add_len; if (get_disk_sweep_mrr_cost(keyno, rows, *flags, bufsz, &dsmrr_cost)) return TRUE; *bufsz += add_len; bool force_dsmrr; /* If mrr_cost_based flag is not set, then set cost of DS-MRR to be minimum of DS-MRR and Default implementations cost. This allows one to force use of DS-MRR whenever it is applicable without affecting other cost-based choices. */ if ((force_dsmrr= !optimizer_flag(thd, OPTIMIZER_SWITCH_MRR_COST_BASED)) && dsmrr_cost.total_cost() > cost->total_cost()) dsmrr_cost= *cost; if (force_dsmrr || dsmrr_cost.total_cost() <= cost->total_cost()) { *flags &= ~HA_MRR_USE_DEFAULT_IMPL; /* Use the DS-MRR implementation */ *flags &= ~HA_MRR_SORTED; /* We will return unordered output */ *cost= dsmrr_cost; res= FALSE; if ((using_cpk && doing_cpk_scan) || (optimizer_flag(thd, OPTIMIZER_SWITCH_MRR_SORT_KEYS) && *flags & HA_MRR_SINGLE_POINT)) { *flags |= DSMRR_IMPL_SORT_KEYS; } if (!(using_cpk && doing_cpk_scan) && !(*flags & HA_MRR_INDEX_ONLY)) { *flags |= DSMRR_IMPL_SORT_ROWIDS; } /* if ((*flags & HA_MRR_SINGLE_POINT) && optimizer_flag(thd, OPTIMIZER_SWITCH_MRR_SORT_KEYS)) *flags |= HA_MRR_MATERIALIZED_KEYS; */ } else { /* Use the default MRR implementation */ res= TRUE; } return res; } /* Take the flags we've returned previously and print one of - Key-ordered scan - Rowid-ordered scan - Key-ordered Rowid-ordered scan */ int DsMrr_impl::dsmrr_explain_info(uint mrr_mode, char *str, size_t size) { const char *key_ordered= "Key-ordered scan"; const char *rowid_ordered= "Rowid-ordered scan"; const char *both_ordered= "Key-ordered Rowid-ordered scan"; const char *used_str=""; const uint BOTH_FLAGS= (DSMRR_IMPL_SORT_KEYS | DSMRR_IMPL_SORT_ROWIDS); if (!(mrr_mode & HA_MRR_USE_DEFAULT_IMPL)) { if ((mrr_mode & BOTH_FLAGS) == BOTH_FLAGS) used_str= both_ordered; else if (mrr_mode & DSMRR_IMPL_SORT_KEYS) used_str= key_ordered; else if (mrr_mode & DSMRR_IMPL_SORT_ROWIDS) used_str= rowid_ordered; uint used_str_len= strlen(used_str); uint copy_len= MY_MIN(used_str_len, size); memcpy(str, used_str, copy_len); return copy_len; } return 0; } static void get_sort_and_sweep_cost(TABLE *table, ha_rows nrows, Cost_estimate *cost); /** Get cost of DS-MRR scan @param keynr Index to be used @param rows E(Number of rows to be scanned) @param flags Scan parameters (HA_MRR_* flags) @param buffer_size INOUT Buffer size @param cost OUT The cost @retval FALSE OK @retval TRUE Error, DS-MRR cannot be used (the buffer is too small for even 1 rowid) */ bool DsMrr_impl::get_disk_sweep_mrr_cost(uint keynr, ha_rows rows, uint flags, uint *buffer_size, Cost_estimate *cost) { ulong max_buff_entries, elem_size; ha_rows rows_in_full_step; ha_rows rows_in_last_step; uint n_full_steps; double index_read_cost; elem_size= primary_file->ref_length + sizeof(void*) * (!MY_TEST(flags & HA_MRR_NO_ASSOCIATION)); max_buff_entries = *buffer_size / elem_size; if (!max_buff_entries) return TRUE; /* Buffer has not enough space for even 1 rowid */ /* Number of iterations we'll make with full buffer */ n_full_steps= (uint)floor(rows2double(rows) / max_buff_entries); /* Get numbers of rows we'll be processing in - non-last sweep, with full buffer - last iteration, with non-full buffer */ rows_in_full_step= max_buff_entries; rows_in_last_step= rows % max_buff_entries; /* Adjust buffer size if we expect to use only part of the buffer */ if (n_full_steps) { get_sort_and_sweep_cost(table, rows_in_full_step, cost); cost->multiply(n_full_steps); } else { cost->reset(); *buffer_size= MY_MAX(*buffer_size, (size_t)(1.2*rows_in_last_step) * elem_size + primary_file->ref_length + table->key_info[keynr].key_length); } Cost_estimate last_step_cost; get_sort_and_sweep_cost(table, rows_in_last_step, &last_step_cost); cost->add(&last_step_cost); if (n_full_steps != 0) cost->mem_cost= *buffer_size; else cost->mem_cost= (double)rows_in_last_step * elem_size; /* Total cost of all index accesses */ index_read_cost= primary_file->keyread_time(keynr, 1, rows); cost->add_io(index_read_cost, 1 /* Random seeks */); return FALSE; } /* Get cost of one sort-and-sweep step It consists of two parts: - sort an array of #nrows ROWIDs using qsort - read #nrows records from table in a sweep. @param table Table being accessed @param nrows Number of rows to be sorted and retrieved @param cost OUT The cost of scan */ static void get_sort_and_sweep_cost(TABLE *table, ha_rows nrows, Cost_estimate *cost) { if (nrows) { get_sweep_read_cost(table, nrows, FALSE, cost); /* Add cost of qsort call: n * log2(n) * cost(rowid_comparison) */ double cmp_op= rows2double(nrows) * (1.0 / TIME_FOR_COMPARE_ROWID); if (cmp_op < 3) cmp_op= 3; cost->cpu_cost += cmp_op * log2(cmp_op); } else cost->reset(); } /** Get cost of reading nrows table records in a "disk sweep" A disk sweep read is a sequence of handler->rnd_pos(rowid) calls that made for an ordered sequence of rowids. We assume hard disk IO. The read is performed as follows: 1. The disk head is moved to the needed cylinder 2. The controller waits for the plate to rotate 3. The data is transferred Time to do #3 is insignificant compared to #2+#1. Time to move the disk head is proportional to head travel distance. Time to wait for the plate to rotate depends on whether the disk head was moved or not. If disk head wasn't moved, the wait time is proportional to distance between the previous block and the block we're reading. If the head was moved, we don't know how much we'll need to wait for the plate to rotate. We assume the wait time to be a variate with a mean of 0.5 of full rotation time. Our cost units are "random disk seeks". The cost of random disk seek is actually not a constant, it depends one range of cylinders we're going to access. We make it constant by introducing a fuzzy concept of "typical datafile length" (it's fuzzy as it's hard to tell whether it should include index file, temp.tables etc). Then random seek cost is: 1 = half_rotation_cost + move_cost * 1/3 * typical_data_file_length We define half_rotation_cost as DISK_SEEK_BASE_COST=0.9. @param table Table to be accessed @param nrows Number of rows to retrieve @param interrupted TRUE <=> Assume that the disk sweep will be interrupted by other disk IO. FALSE - otherwise. @param cost OUT The cost. */ void get_sweep_read_cost(TABLE *table, ha_rows nrows, bool interrupted, Cost_estimate *cost) { DBUG_ENTER("get_sweep_read_cost"); cost->reset(); if (table->file->primary_key_is_clustered()) { cost->io_count= table->file->read_time(table->s->primary_key, (uint) nrows, nrows); } else { double n_blocks= ceil(ulonglong2double(table->file->stats.data_file_length) / IO_SIZE); double busy_blocks= n_blocks * (1.0 - pow(1.0 - 1.0/n_blocks, rows2double(nrows))); if (busy_blocks < 1.0) busy_blocks= 1.0; DBUG_PRINT("info",("sweep: nblocks=%g, busy_blocks=%g", n_blocks, busy_blocks)); cost->io_count= busy_blocks; if (!interrupted) { /* Assume reading is done in one 'sweep' */ cost->avg_io_cost= (DISK_SEEK_BASE_COST + DISK_SEEK_PROP_COST*n_blocks/busy_blocks); } } DBUG_PRINT("info",("returning cost=%g", cost->total_cost())); DBUG_VOID_RETURN; } /* ************************************************************************** * DS-MRR implementation ends ***************************************************************************/