/* Copyright (C) 2000-2003 MySQL AB This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include "mysql_priv.h" #include #include #include "slave.h" #include "sql_repl.h" #include "rpl_filter.h" #include "repl_failsafe.h" #include "stacktrace.h" #include "mysqld_suffix.h" #include "mysys_err.h" #include "ha_myisam.h" #ifdef WITH_INNOBASE_STORAGE_ENGINE #define OPT_INNODB_DEFAULT 1 #else #define OPT_INNODB_DEFAULT 0 #endif #define OPT_BDB_DEFAULT 0 #ifdef WITH_NDBCLUSTER_STORAGE_ENGINE #define OPT_NDBCLUSTER_DEFAULT 0 #if defined(NOT_ENOUGH_TESTED) \ && defined(NDB_SHM_TRANSPORTER) && MYSQL_VERSION_ID >= 50000 #define OPT_NDB_SHM_DEFAULT 1 #else #define OPT_NDB_SHM_DEFAULT 0 #endif #else #define OPT_NDBCLUSTER_DEFAULT 0 #endif #include #include #include #include "sp_rcontext.h" #include "sp_cache.h" #define mysqld_charset &my_charset_latin1 #ifndef DBUG_OFF #define ONE_THREAD #endif #ifdef HAVE_purify #define IF_PURIFY(A,B) (A) #else #define IF_PURIFY(A,B) (B) #endif /* stack traces are only supported on linux intel */ #if defined(__linux__) && defined(__i386__) && defined(USE_PSTACK) #define HAVE_STACK_TRACE_ON_SEGV #include "../pstack/pstack.h" char pstack_file_name[80]; #endif /* __linux__ */ /* We have HAVE_purify below as this speeds up the shutdown of MySQL */ #if defined(HAVE_DEC_3_2_THREADS) || defined(SIGNALS_DONT_BREAK_READ) || defined(HAVE_purify) && defined(__linux__) #define HAVE_CLOSE_SERVER_SOCK 1 #endif extern "C" { // Because of SCO 3.2V4.2 #include #include #ifndef __GNU_LIBRARY__ #define __GNU_LIBRARY__ // Skip warnings in getopt.h #endif #include #ifdef HAVE_SYSENT_H #include #endif #ifdef HAVE_PWD_H #include // For getpwent #endif #ifdef HAVE_GRP_H #include #endif #include #if defined(OS2) # include #elif !defined(__WIN__) # ifndef __NETWARE__ #include # endif /* __NETWARE__ */ #ifdef HAVE_SYS_UN_H # include #endif #include #ifdef HAVE_SELECT_H # include #endif #ifdef HAVE_SYS_SELECT_H #include #endif #include #endif /* __WIN__ */ #ifdef HAVE_LIBWRAP #include #include #ifdef NEED_SYS_SYSLOG_H #include #endif /* NEED_SYS_SYSLOG_H */ int allow_severity = LOG_INFO; int deny_severity = LOG_WARNING; #endif /* HAVE_LIBWRAP */ #ifdef HAVE_SYS_MMAN_H #include #endif #ifdef __NETWARE__ #define zVOLSTATE_ACTIVE 6 #define zVOLSTATE_DEACTIVE 2 #define zVOLSTATE_MAINTENANCE 3 #include #include #include #include #include //For NEB #include //For NEB #include //For NEB #include //For NSS event structures #include static void *neb_consumer_id= NULL; //For storing NEB consumer id static char datavolname[256]= {0}; static VolumeID_t datavolid; static event_handle_t eh; static Report_t ref; static void *refneb= NULL; my_bool event_flag= FALSE; static int volumeid= -1; /* NEB event callback */ unsigned long neb_event_callback(struct EventBlock *eblock); static void registerwithneb(); static void getvolumename(); static void getvolumeID(BYTE *volumeName); #endif /* __NETWARE__ */ #ifdef _AIX41 int initgroups(const char *,unsigned int); #endif #if defined(__FreeBSD__) && defined(HAVE_IEEEFP_H) #include #ifdef HAVE_FP_EXCEPT // Fix type conflict typedef fp_except fp_except_t; #endif /* We can't handle floating point exceptions with threads, so disable this on freebsd */ inline void reset_floating_point_exceptions() { /* Don't fall for overflow, underflow,divide-by-zero or loss of precision */ #if defined(__i386__) fpsetmask(~(FP_X_INV | FP_X_DNML | FP_X_OFL | FP_X_UFL | FP_X_DZ | FP_X_IMP)); #else fpsetmask(~(FP_X_INV | FP_X_OFL | FP_X_UFL | FP_X_DZ | FP_X_IMP)); #endif } #else #define reset_floating_point_exceptions() #endif /* __FreeBSD__ && HAVE_IEEEFP_H */ } /* cplusplus */ #if defined(HAVE_LINUXTHREADS) #define THR_KILL_SIGNAL SIGINT #else #define THR_KILL_SIGNAL SIGUSR2 // Can't use this with LinuxThreads #endif #define MYSQL_KILL_SIGNAL SIGTERM #ifdef HAVE_GLIBC2_STYLE_GETHOSTBYNAME_R #include #else #include // For thr_setconcurency() #endif #ifdef SOLARIS extern "C" int gethostname(char *name, int namelen); #endif /* Constants */ const char *show_comp_option_name[]= {"YES", "NO", "DISABLED"}; static const char *sql_mode_names[]= { "REAL_AS_FLOAT", "PIPES_AS_CONCAT", "ANSI_QUOTES", "IGNORE_SPACE", "?", "ONLY_FULL_GROUP_BY", "NO_UNSIGNED_SUBTRACTION", "NO_DIR_IN_CREATE", "POSTGRESQL", "ORACLE", "MSSQL", "DB2", "MAXDB", "NO_KEY_OPTIONS", "NO_TABLE_OPTIONS", "NO_FIELD_OPTIONS", "MYSQL323", "MYSQL40", "ANSI", "NO_AUTO_VALUE_ON_ZERO", "NO_BACKSLASH_ESCAPES", "STRICT_TRANS_TABLES", "STRICT_ALL_TABLES", "NO_ZERO_IN_DATE", "NO_ZERO_DATE", "ALLOW_INVALID_DATES", "ERROR_FOR_DIVISION_BY_ZERO", "TRADITIONAL", "NO_AUTO_CREATE_USER", "HIGH_NOT_PRECEDENCE", "NO_ENGINE_SUBSTITUTION", NullS }; static const unsigned int sql_mode_names_len[]= { /*REAL_AS_FLOAT*/ 13, /*PIPES_AS_CONCAT*/ 15, /*ANSI_QUOTES*/ 11, /*IGNORE_SPACE*/ 12, /*?*/ 1, /*ONLY_FULL_GROUP_BY*/ 18, /*NO_UNSIGNED_SUBTRACTION*/ 23, /*NO_DIR_IN_CREATE*/ 16, /*POSTGRESQL*/ 10, /*ORACLE*/ 6, /*MSSQL*/ 5, /*DB2*/ 3, /*MAXDB*/ 5, /*NO_KEY_OPTIONS*/ 14, /*NO_TABLE_OPTIONS*/ 16, /*NO_FIELD_OPTIONS*/ 16, /*MYSQL323*/ 8, /*MYSQL40*/ 7, /*ANSI*/ 4, /*NO_AUTO_VALUE_ON_ZERO*/ 21, /*NO_BACKSLASH_ESCAPES*/ 20, /*STRICT_TRANS_TABLES*/ 19, /*STRICT_ALL_TABLES*/ 17, /*NO_ZERO_IN_DATE*/ 15, /*NO_ZERO_DATE*/ 12, /*ALLOW_INVALID_DATES*/ 19, /*ERROR_FOR_DIVISION_BY_ZERO*/ 26, /*TRADITIONAL*/ 11, /*NO_AUTO_CREATE_USER*/ 19, /*HIGH_NOT_PRECEDENCE*/ 19, /*NO_ENGINE_SUBSTITUTION*/ 22 }; TYPELIB sql_mode_typelib= { array_elements(sql_mode_names)-1,"", sql_mode_names, (unsigned int *)sql_mode_names_len }; static const char *tc_heuristic_recover_names[]= { "COMMIT", "ROLLBACK", NullS }; static TYPELIB tc_heuristic_recover_typelib= { array_elements(tc_heuristic_recover_names)-1,"", tc_heuristic_recover_names, NULL }; const char *first_keyword= "first", *binary_keyword= "BINARY"; const char *my_localhost= "localhost", *delayed_user= "DELAYED"; #if SIZEOF_OFF_T > 4 && defined(BIG_TABLES) #define GET_HA_ROWS GET_ULL #else #define GET_HA_ROWS GET_ULONG #endif bool opt_large_files= sizeof(my_off_t) > 4; /* Used with --help for detailed option */ static my_bool opt_help= 0, opt_verbose= 0; arg_cmp_func Arg_comparator::comparator_matrix[5][2] = {{&Arg_comparator::compare_string, &Arg_comparator::compare_e_string}, {&Arg_comparator::compare_real, &Arg_comparator::compare_e_real}, {&Arg_comparator::compare_int_signed, &Arg_comparator::compare_e_int}, {&Arg_comparator::compare_row, &Arg_comparator::compare_e_row}, {&Arg_comparator::compare_decimal, &Arg_comparator::compare_e_decimal}}; /* static variables */ static bool lower_case_table_names_used= 0; static bool volatile select_thread_in_use, signal_thread_in_use; static bool volatile ready_to_exit; static my_bool opt_debugging= 0, opt_external_locking= 0, opt_console= 0; static my_bool opt_bdb, opt_isam, opt_ndbcluster; static my_bool opt_short_log_format= 0; static my_bool opt_log_queries_not_using_indexes= 0; static uint kill_cached_threads, wake_thread; static ulong killed_threads, thread_created; static ulong max_used_connections; static ulong my_bind_addr; /* the address we bind to */ static volatile ulong cached_thread_count= 0; static const char *sql_mode_str= "OFF"; static char *mysqld_user, *mysqld_chroot, *log_error_file_ptr; static char *opt_init_slave, *language_ptr, *opt_init_connect; static char *default_character_set_name; static char *my_bind_addr_str; static char *default_collation_name; static char mysql_data_home_buff[2]; static struct passwd *user_info; static I_List thread_cache; static pthread_cond_t COND_thread_cache, COND_flush_thread_cache; #ifdef WITH_BERKELEY_STORAGE_ENGINE static my_bool opt_sync_bdb_logs; #endif /* Global variables */ bool opt_log, opt_update_log, opt_bin_log, opt_slow_log; bool opt_error_log= IF_WIN(1,0); bool opt_disable_networking=0, opt_skip_show_db=0; my_bool opt_character_set_client_handshake= 1; bool server_id_supplied = 0; bool opt_endinfo,using_udf_functions; my_bool locked_in_memory; bool opt_using_transactions, using_update_log; bool volatile abort_loop; bool volatile shutdown_in_progress, grant_option; my_bool opt_skip_slave_start = 0; // If set, slave is not autostarted my_bool opt_reckless_slave = 0; my_bool opt_enable_named_pipe= 0; my_bool opt_local_infile, opt_slave_compressed_protocol; my_bool opt_safe_user_create = 0, opt_no_mix_types = 0; my_bool opt_show_slave_auth_info, opt_sql_bin_update = 0; my_bool opt_log_slave_updates= 0; my_bool opt_innodb; #ifdef WITH_INNOBASE_STORAGE_ENGINE extern struct show_var_st innodb_status_variables[]; extern uint innobase_init_flags, innobase_lock_type; extern uint innobase_flush_log_at_trx_commit; extern ulong innobase_cache_size, innobase_fast_shutdown; extern ulong innobase_large_page_size; extern char *innobase_home, *innobase_tmpdir, *innobase_logdir; extern long innobase_lock_scan_time; extern long innobase_mirrored_log_groups, innobase_log_files_in_group; extern long innobase_log_file_size, innobase_log_buffer_size; extern long innobase_buffer_pool_size, innobase_additional_mem_pool_size; extern long innobase_buffer_pool_awe_mem_mb; extern long innobase_file_io_threads, innobase_lock_wait_timeout; extern long innobase_force_recovery; extern long innobase_open_files; extern char *innobase_data_home_dir, *innobase_data_file_path; extern char *innobase_log_group_home_dir, *innobase_log_arch_dir; extern char *innobase_unix_file_flush_method; /* The following variables have to be my_bool for SHOW VARIABLES to work */ extern my_bool innobase_log_archive, innobase_use_doublewrite, innobase_use_checksums, innobase_use_large_pages, innobase_use_native_aio, innobase_file_per_table, innobase_locks_unsafe_for_binlog, innobase_create_status_file; extern my_bool innobase_very_fast_shutdown; /* set this to 1 just before calling innobase_end() if you want InnoDB to shut down without flushing the buffer pool: this is equivalent to a 'crash' */ extern "C" { extern ulong srv_max_buf_pool_modified_pct; extern ulong srv_max_purge_lag; extern ulong srv_auto_extend_increment; extern ulong srv_n_spin_wait_rounds; extern ulong srv_n_free_tickets_to_enter; extern ulong srv_thread_sleep_delay; extern ulong srv_thread_concurrency; extern ulong srv_commit_concurrency; } #endif #ifdef WITH_BERKELEY_STORAGE_ENGINE #ifndef HAVE_U_INT32_T typedef unsigned int u_int32_t; #endif extern const u_int32_t bdb_DB_TXN_NOSYNC, bdb_DB_RECOVER, bdb_DB_PRIVATE; extern bool berkeley_shared_data; extern u_int32_t berkeley_init_flags,berkeley_env_flags, berkeley_lock_type, berkeley_lock_types[]; extern ulong berkeley_max_lock, berkeley_log_buffer_size; extern ulonglong berkeley_cache_size; extern ulong berkeley_region_size, berkeley_cache_parts; extern char *berkeley_home, *berkeley_tmpdir, *berkeley_logdir; extern long berkeley_lock_scan_time; extern TYPELIB berkeley_lock_typelib; #endif #ifdef WITH_NDBCLUSTER_STORAGE_ENGINE const char *opt_ndbcluster_connectstring= 0; const char *opt_ndb_connectstring= 0; char opt_ndb_constrbuf[1024]; unsigned opt_ndb_constrbuf_len= 0; my_bool opt_ndb_shm, opt_ndb_optimized_node_selection; ulong opt_ndb_cache_check_time; const char *opt_ndb_mgmd; ulong opt_ndb_nodeid; extern struct show_var_st ndb_status_variables[]; extern const char *ndb_distribution_names[]; extern TYPELIB ndb_distribution_typelib; extern const char *opt_ndb_distribution; extern enum ndb_distribution opt_ndb_distribution_id; #endif my_bool opt_readonly, use_temp_pool, relay_log_purge; my_bool opt_sync_frm, opt_allow_suspicious_udfs; my_bool opt_secure_auth= 0; my_bool opt_log_slow_admin_statements= 0; my_bool lower_case_file_system= 0; my_bool opt_large_pages= 0; uint opt_large_page_size= 0; my_bool opt_old_style_user_limits= 0, trust_function_creators= 0; /* True if there is at least one per-hour limit for some user, so we should check them before each query (and possibly reset counters when hour is changed). False otherwise. */ volatile bool mqh_used = 0; my_bool opt_noacl; my_bool sp_automatic_privileges= 1; #ifdef HAVE_INITGROUPS static bool calling_initgroups= FALSE; /* Used in SIGSEGV handler. */ #endif uint mysqld_port, test_flags, select_errors, dropping_tables, ha_open_options; uint delay_key_write_options, protocol_version; uint lower_case_table_names; uint tc_heuristic_recover= 0; uint volatile thread_count, thread_running; ulonglong thd_startup_options; ulong back_log, connect_timeout, concurrency, server_id; ulong table_cache_size, table_def_size; ulong thread_stack, what_to_log; ulong query_buff_size, slow_launch_time, slave_open_temp_tables; ulong open_files_limit, max_binlog_size, max_relay_log_size; ulong slave_net_timeout, slave_trans_retries; ulong thread_cache_size=0, binlog_cache_size=0, max_binlog_cache_size=0; ulong query_cache_size=0; ulong refresh_version, flush_version; /* Increments on each reload */ query_id_t query_id; ulong aborted_threads, aborted_connects; ulong delayed_insert_timeout, delayed_insert_limit, delayed_queue_size; ulong delayed_insert_threads, delayed_insert_writes, delayed_rows_in_use; ulong delayed_insert_errors,flush_time; ulong specialflag=0; ulong binlog_cache_use= 0, binlog_cache_disk_use= 0; ulong max_connections, max_connect_errors; uint max_user_connections= 0; ulong thread_id=1L,current_pid; ulong slow_launch_threads = 0, sync_binlog_period; ulong expire_logs_days = 0; ulong rpl_recovery_rank=0; double log_10[32]; /* 10 potences */ time_t start_time; char mysql_home[FN_REFLEN], pidfile_name[FN_REFLEN], system_time_zone[30]; char *default_tz_name; char log_error_file[FN_REFLEN], glob_hostname[FN_REFLEN]; char mysql_real_data_home[FN_REFLEN], language[FN_REFLEN], reg_ext[FN_EXTLEN], mysql_charsets_dir[FN_REFLEN], *opt_init_file, *opt_tc_log_file, def_ft_boolean_syntax[sizeof(ft_boolean_syntax)]; const key_map key_map_empty(0); key_map key_map_full(0); // Will be initialized later const char *opt_date_time_formats[3]; char *mysql_data_home= mysql_real_data_home; char server_version[SERVER_VERSION_LENGTH]; char *mysqld_unix_port, *opt_mysql_tmpdir; const char **errmesg; /* Error messages */ const char *myisam_recover_options_str="OFF"; const char *myisam_stats_method_str="nulls_unequal"; /* name of reference on left espression in rewritten IN subquery */ const char *in_left_expr_name= ""; /* name of additional condition */ const char *in_additional_cond= ""; my_decimal decimal_zero; /* classes for comparation parsing/processing */ Eq_creator eq_creator; Ne_creator ne_creator; Gt_creator gt_creator; Lt_creator lt_creator; Ge_creator ge_creator; Le_creator le_creator; FILE *bootstrap_file; int bootstrap_error; FILE *stderror_file=0; I_List threads; I_List key_caches; Rpl_filter* rpl_filter; Rpl_filter* binlog_filter; struct system_variables global_system_variables; struct system_variables max_system_variables; struct system_status_var global_status_var; MY_TMPDIR mysql_tmpdir_list; MY_BITMAP temp_pool; CHARSET_INFO *system_charset_info, *files_charset_info ; CHARSET_INFO *national_charset_info, *table_alias_charset; SHOW_COMP_OPTION have_raid, have_openssl, have_symlink, have_query_cache; SHOW_COMP_OPTION have_geometry, have_rtree_keys; SHOW_COMP_OPTION have_crypt, have_compress; /* Thread specific variables */ pthread_key(MEM_ROOT**,THR_MALLOC); pthread_key(THD*, THR_THD); pthread_mutex_t LOCK_mysql_create_db, LOCK_Acl, LOCK_open, LOCK_thread_count, LOCK_mapped_file, LOCK_status, LOCK_global_read_lock, LOCK_error_log, LOCK_uuid_generator, LOCK_delayed_insert, LOCK_delayed_status, LOCK_delayed_create, LOCK_crypt, LOCK_bytes_sent, LOCK_bytes_received, LOCK_global_system_variables, LOCK_user_conn, LOCK_slave_list, LOCK_active_mi; #ifdef HAVE_OPENSSL pthread_mutex_t LOCK_des_key_file; #endif rw_lock_t LOCK_grant, LOCK_sys_init_connect, LOCK_sys_init_slave; pthread_cond_t COND_refresh,COND_thread_count; pthread_t signal_thread; pthread_attr_t connection_attrib; pthread_mutex_t LOCK_server_started; pthread_cond_t COND_server_started; int mysqld_server_started= 0; File_parser_dummy_hook file_parser_dummy_hook; /* replication parameters, if master_host is not NULL, we are a slave */ uint master_port= MYSQL_PORT, master_connect_retry = 60; uint report_port= MYSQL_PORT; ulong master_retry_count=0; char *master_user, *master_password, *master_host, *master_info_file; char *relay_log_info_file, *report_user, *report_password, *report_host; char *opt_relay_logname = 0, *opt_relaylog_index_name=0; my_bool master_ssl; char *master_ssl_key, *master_ssl_cert; char *master_ssl_ca, *master_ssl_capath, *master_ssl_cipher; /* Static variables */ static bool kill_in_progress, segfaulted; static my_bool opt_do_pstack, opt_bootstrap, opt_myisam_log; static int cleanup_done; static ulong opt_specialflag, opt_myisam_block_size; static char *opt_logname, *opt_update_logname, *opt_binlog_index_name; static char *opt_slow_logname, *opt_tc_heuristic_recover; static char *mysql_home_ptr, *pidfile_name_ptr; static char **defaults_argv; static char *opt_bin_logname; static my_socket unix_sock,ip_sock; static pthread_t select_thread; struct rand_struct sql_rand; // used by sql_class.cc:THD::THD() /* OS specific variables */ #ifdef __WIN__ #undef getpid #include static pthread_cond_t COND_handler_count; static uint handler_count; static bool start_mode=0, use_opt_args; static int opt_argc; static char **opt_argv; #if !defined(EMBEDDED_LIBRARY) static HANDLE hEventShutdown; static char shutdown_event_name[40]; #include "nt_servc.h" static NTService Service; // Service object for WinNT #endif /* EMBEDDED_LIBRARY */ #endif /* __WIN__ */ #ifdef __NT__ static char pipe_name[512]; static SECURITY_ATTRIBUTES saPipeSecurity; static SECURITY_DESCRIPTOR sdPipeDescriptor; static HANDLE hPipe = INVALID_HANDLE_VALUE; #endif #ifdef OS2 pthread_cond_t eventShutdown; #endif #ifndef EMBEDDED_LIBRARY bool mysqld_embedded=0; #else bool mysqld_embedded=1; #endif #ifndef DBUG_OFF static const char* default_dbug_option; #endif #ifdef HAVE_LIBWRAP const char *libwrapName= NULL; #endif #ifdef HAVE_QUERY_CACHE static ulong query_cache_limit= 0; ulong query_cache_min_res_unit= QUERY_CACHE_MIN_RESULT_DATA_SIZE; Query_cache query_cache; #endif #ifdef HAVE_SMEM char *shared_memory_base_name= default_shared_memory_base_name; my_bool opt_enable_shared_memory; HANDLE smem_event_connect_request= 0; #endif #include "sslopt-vars.h" #ifdef HAVE_OPENSSL #include #ifndef HAVE_YASSL typedef struct CRYPTO_dynlock_value { rw_lock_t lock; } openssl_lock_t; static openssl_lock_t *openssl_stdlocks; static openssl_lock_t *openssl_dynlock_create(const char *, int); static void openssl_dynlock_destroy(openssl_lock_t *, const char *, int); static void openssl_lock_function(int, int, const char *, int); static void openssl_lock(int, openssl_lock_t *, const char *, int); static unsigned long openssl_id_function(); #endif char *des_key_file; struct st_VioSSLAcceptorFd *ssl_acceptor_fd; #endif /* HAVE_OPENSSL */ /* Function declarations */ static void start_signal_handler(void); pthread_handler_t signal_hand(void *arg); static void mysql_init_variables(void); static void get_options(int argc,char **argv); static void set_server_version(void); static int init_thread_environment(); static char *get_relative_path(const char *path); static void fix_paths(void); pthread_handler_t handle_connections_sockets(void *arg); pthread_handler_t kill_server_thread(void *arg); static void bootstrap(FILE *file); static void close_server_sock(); static bool read_init_file(char *file_name); #ifdef __NT__ pthread_handler_t handle_connections_namedpipes(void *arg); #endif #ifdef HAVE_SMEM pthread_handler_t handle_connections_shared_memory(void *arg); #endif pthread_handler_t handle_slave(void *arg); static ulong find_bit_type(const char *x, TYPELIB *bit_lib); static void clean_up(bool print_message); static void clean_up_mutexes(void); static void wait_for_signal_thread_to_end(void); static int test_if_case_insensitive(const char *dir_name); static void create_pid_file(); #ifndef EMBEDDED_LIBRARY /**************************************************************************** ** Code to end mysqld ****************************************************************************/ static void close_connections(void) { #ifdef EXTRA_DEBUG int count=0; #endif DBUG_ENTER("close_connections"); /* Clear thread cache */ kill_cached_threads++; flush_thread_cache(); /* kill flush thread */ (void) pthread_mutex_lock(&LOCK_manager); if (manager_thread_in_use) { DBUG_PRINT("quit",("killing manager thread: 0x%lx",manager_thread)); (void) pthread_cond_signal(&COND_manager); } (void) pthread_mutex_unlock(&LOCK_manager); /* kill connection thread */ #if !defined(__WIN__) && !defined(__EMX__) && !defined(OS2) && !defined(__NETWARE__) DBUG_PRINT("quit",("waiting for select thread: 0x%lx",select_thread)); (void) pthread_mutex_lock(&LOCK_thread_count); while (select_thread_in_use) { struct timespec abstime; int error; LINT_INIT(error); DBUG_PRINT("info",("Waiting for select thread")); #ifndef DONT_USE_THR_ALARM if (pthread_kill(select_thread,THR_CLIENT_ALARM)) break; // allready dead #endif set_timespec(abstime, 2); for (uint tmp=0 ; tmp < 10 && select_thread_in_use; tmp++) { error=pthread_cond_timedwait(&COND_thread_count,&LOCK_thread_count, &abstime); if (error != EINTR) break; } #ifdef EXTRA_DEBUG if (error != 0 && !count++) sql_print_error("Got error %d from pthread_cond_timedwait",error); #endif close_server_sock(); } (void) pthread_mutex_unlock(&LOCK_thread_count); #endif /* __WIN__ */ /* Abort listening to new connections */ DBUG_PRINT("quit",("Closing sockets")); if (!opt_disable_networking ) { if (ip_sock != INVALID_SOCKET) { (void) shutdown(ip_sock,2); (void) closesocket(ip_sock); ip_sock= INVALID_SOCKET; } } #ifdef __NT__ if (hPipe != INVALID_HANDLE_VALUE && opt_enable_named_pipe) { HANDLE temp; DBUG_PRINT("quit", ("Closing named pipes") ); /* Create connection to the handle named pipe handler to break the loop */ if ((temp = CreateFile(pipe_name, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL )) != INVALID_HANDLE_VALUE) { WaitNamedPipe(pipe_name, 1000); DWORD dwMode = PIPE_READMODE_BYTE | PIPE_WAIT; SetNamedPipeHandleState(temp, &dwMode, NULL, NULL); CancelIo(temp); DisconnectNamedPipe(temp); CloseHandle(temp); } } #endif #ifdef HAVE_SYS_UN_H if (unix_sock != INVALID_SOCKET) { (void) shutdown(unix_sock,2); (void) closesocket(unix_sock); (void) unlink(mysqld_unix_port); unix_sock= INVALID_SOCKET; } #endif end_thr_alarm(0); // Abort old alarms. /* First signal all threads that it's time to die This will give the threads some time to gracefully abort their statements and inform their clients that the server is about to die. */ THD *tmp; (void) pthread_mutex_lock(&LOCK_thread_count); // For unlink from list I_List_iterator it(threads); while ((tmp=it++)) { DBUG_PRINT("quit",("Informing thread %ld that it's time to die", tmp->thread_id)); /* We skip slave threads on this first loop through. */ if (tmp->slave_thread) continue; tmp->killed= THD::KILL_CONNECTION; if (tmp->mysys_var) { tmp->mysys_var->abort=1; pthread_mutex_lock(&tmp->mysys_var->mutex); if (tmp->mysys_var->current_cond) { pthread_mutex_lock(tmp->mysys_var->current_mutex); pthread_cond_broadcast(tmp->mysys_var->current_cond); pthread_mutex_unlock(tmp->mysys_var->current_mutex); } pthread_mutex_unlock(&tmp->mysys_var->mutex); } } (void) pthread_mutex_unlock(&LOCK_thread_count); // For unlink from list end_slave(); if (thread_count) sleep(2); // Give threads time to die /* Force remaining threads to die by closing the connection to the client This will ensure that threads that are waiting for a command from the client on a blocking read call are aborted. */ for (;;) { DBUG_PRINT("quit",("Locking LOCK_thread_count")); (void) pthread_mutex_lock(&LOCK_thread_count); // For unlink from list if (!(tmp=threads.get())) { DBUG_PRINT("quit",("Unlocking LOCK_thread_count")); (void) pthread_mutex_unlock(&LOCK_thread_count); break; } #ifndef __bsdi__ // Bug in BSDI kernel if (tmp->vio_ok()) { if (global_system_variables.log_warnings) sql_print_warning(ER(ER_FORCING_CLOSE),my_progname, tmp->thread_id, (tmp->main_security_ctx.user ? tmp->main_security_ctx.user : "")); close_connection(tmp,0,0); } #endif DBUG_PRINT("quit",("Unlocking LOCK_thread_count")); (void) pthread_mutex_unlock(&LOCK_thread_count); } /* All threads has now been aborted */ DBUG_PRINT("quit",("Waiting for threads to die (count=%u)",thread_count)); (void) pthread_mutex_lock(&LOCK_thread_count); while (thread_count) { (void) pthread_cond_wait(&COND_thread_count,&LOCK_thread_count); DBUG_PRINT("quit",("One thread died (count=%u)",thread_count)); } (void) pthread_mutex_unlock(&LOCK_thread_count); DBUG_PRINT("quit",("close_connections thread")); DBUG_VOID_RETURN; } #endif /*EMBEDDED_LIBRARY*/ static void close_server_sock() { #ifdef HAVE_CLOSE_SERVER_SOCK DBUG_ENTER("close_server_sock"); my_socket tmp_sock; tmp_sock=ip_sock; if (tmp_sock != INVALID_SOCKET) { ip_sock=INVALID_SOCKET; DBUG_PRINT("info",("calling shutdown on TCP/IP socket")); VOID(shutdown(tmp_sock,2)); #if defined(__NETWARE__) /* The following code is disabled for normal systems as it causes MySQL to hang on AIX 4.3 during shutdown */ DBUG_PRINT("info",("calling closesocket on TCP/IP socket")); VOID(closesocket(tmp_sock)); #endif } tmp_sock=unix_sock; if (tmp_sock != INVALID_SOCKET) { unix_sock=INVALID_SOCKET; DBUG_PRINT("info",("calling shutdown on unix socket")); VOID(shutdown(tmp_sock,2)); #if defined(__NETWARE__) /* The following code is disabled for normal systems as it may cause MySQL to hang on AIX 4.3 during shutdown */ DBUG_PRINT("info",("calling closesocket on unix/IP socket")); VOID(closesocket(tmp_sock)); #endif VOID(unlink(mysqld_unix_port)); } DBUG_VOID_RETURN; #endif } void kill_mysql(void) { DBUG_ENTER("kill_mysql"); #ifdef SIGNALS_DONT_BREAK_READ abort_loop=1; // Break connection loops close_server_sock(); // Force accept to wake up #endif #if defined(__WIN__) #if !defined(EMBEDDED_LIBRARY) { if (!SetEvent(hEventShutdown)) { DBUG_PRINT("error",("Got error: %ld from SetEvent",GetLastError())); } /* or: HANDLE hEvent=OpenEvent(0, FALSE, "MySqlShutdown"); SetEvent(hEventShutdown); CloseHandle(hEvent); */ } #endif #elif defined(OS2) pthread_cond_signal(&eventShutdown); // post semaphore #elif defined(HAVE_PTHREAD_KILL) if (pthread_kill(signal_thread, MYSQL_KILL_SIGNAL)) { DBUG_PRINT("error",("Got error %d from pthread_kill",errno)); /* purecov: inspected */ } #elif !defined(SIGNALS_DONT_BREAK_READ) kill(current_pid, MYSQL_KILL_SIGNAL); #endif DBUG_PRINT("quit",("After pthread_kill")); shutdown_in_progress=1; // Safety if kill didn't work #ifdef SIGNALS_DONT_BREAK_READ if (!kill_in_progress) { pthread_t tmp; abort_loop=1; if (pthread_create(&tmp,&connection_attrib, kill_server_thread, (void*) 0)) sql_print_error("Can't create thread to kill server"); } #endif DBUG_VOID_RETURN; } /* Force server down. kill all connections and threads and exit */ #if defined(OS2) || defined(__NETWARE__) extern "C" void kill_server(int sig_ptr) #define RETURN_FROM_KILL_SERVER DBUG_VOID_RETURN #elif !defined(__WIN__) static void *kill_server(void *sig_ptr) #define RETURN_FROM_KILL_SERVER DBUG_RETURN(0) #else static void __cdecl kill_server(int sig_ptr) #define RETURN_FROM_KILL_SERVER DBUG_VOID_RETURN #endif { DBUG_ENTER("kill_server"); #ifndef EMBEDDED_LIBRARY int sig=(int) (long) sig_ptr; // This is passed a int // if there is a signal during the kill in progress, ignore the other if (kill_in_progress) // Safety RETURN_FROM_KILL_SERVER; kill_in_progress=TRUE; abort_loop=1; // This should be set my_sigset(sig,SIG_IGN); if (sig == MYSQL_KILL_SIGNAL || sig == 0) sql_print_information(ER(ER_NORMAL_SHUTDOWN),my_progname); else sql_print_error(ER(ER_GOT_SIGNAL),my_progname,sig); /* purecov: inspected */ #if defined(HAVE_SMEM) && defined(__WIN__) /* Send event to smem_event_connect_request for aborting */ if (!SetEvent(smem_event_connect_request)) { DBUG_PRINT("error", ("Got error: %ld from SetEvent of smem_event_connect_request", GetLastError())); } #endif #if defined(__NETWARE__) || (defined(USE_ONE_SIGNAL_HAND) && !defined(__WIN__) && !defined(OS2)) my_thread_init(); // If this is a new thread #endif close_connections(); if (sig != MYSQL_KILL_SIGNAL && sig != 0) unireg_abort(1); /* purecov: inspected */ else unireg_end(); #ifdef __NETWARE__ if (!event_flag) pthread_join(select_thread, NULL); // wait for main thread #endif /* __NETWARE__ */ pthread_exit(0); /* purecov: deadcode */ #endif /* EMBEDDED_LIBRARY */ RETURN_FROM_KILL_SERVER; } #if defined(USE_ONE_SIGNAL_HAND) || (defined(__NETWARE__) && defined(SIGNALS_DONT_BREAK_READ)) pthread_handler_t kill_server_thread(void *arg __attribute__((unused))) { my_thread_init(); // Initialize new thread kill_server(0); my_thread_end(); // Normally never reached return 0; } #endif extern "C" sig_handler print_signal_warning(int sig) { if (!DBUG_IN_USE) { if (global_system_variables.log_warnings) sql_print_warning("Got signal %d from thread %d", sig,my_thread_id()); } #ifdef DONT_REMEMBER_SIGNAL my_sigset(sig,print_signal_warning); /* int. thread system calls */ #endif #if !defined(__WIN__) && !defined(OS2) && !defined(__NETWARE__) if (sig == SIGALRM) alarm(2); /* reschedule alarm */ #endif } /* cleanup all memory and end program nicely SYNOPSIS unireg_end() NOTES This function never returns. If SIGNALS_DONT_BREAK_READ is defined, this function is called by the main thread. To get MySQL to shut down nicely in this case (Mac OS X) we have to call exit() instead if pthread_exit(). */ #ifndef EMBEDDED_LIBRARY void unireg_end(void) { clean_up(1); my_thread_end(); #if defined(SIGNALS_DONT_BREAK_READ) && !defined(__NETWARE__) exit(0); #else pthread_exit(0); // Exit is in main thread #endif } extern "C" void unireg_abort(int exit_code) { DBUG_ENTER("unireg_abort"); if (exit_code) sql_print_error("Aborting\n"); clean_up(exit_code || !opt_bootstrap); /* purecov: inspected */ DBUG_PRINT("quit",("done with cleanup in unireg_abort")); wait_for_signal_thread_to_end(); clean_up_mutexes(); my_end(opt_endinfo ? MY_CHECK_ERROR | MY_GIVE_INFO : 0); exit(exit_code); /* purecov: inspected */ } #endif void clean_up(bool print_message) { DBUG_PRINT("exit",("clean_up")); if (cleanup_done++) return; /* purecov: inspected */ mysql_log.cleanup(); mysql_slow_log.cleanup(); mysql_bin_log.cleanup(); #ifdef HAVE_REPLICATION if (use_slave_mask) bitmap_free(&slave_error_mask); #endif my_tz_free(); my_dbopt_free(); #ifndef NO_EMBEDDED_ACCESS_CHECKS acl_free(1); grant_free(); #endif query_cache_destroy(); table_cache_free(); table_def_free(); hostname_cache_free(); item_user_lock_free(); lex_free(); /* Free some memory */ set_var_free(); free_charsets(); if (!opt_noacl) { #ifdef HAVE_DLOPEN udf_free(); #endif plugin_free(); } (void) ha_panic(HA_PANIC_CLOSE); /* close all tables and logs */ if (tc_log) tc_log->close(); xid_cache_free(); delete_elements(&key_caches, (void (*)(const char*, gptr)) free_key_cache); multi_keycache_free(); end_thr_alarm(1); /* Free allocated memory */ #ifdef USE_RAID end_raid(); #endif my_free_open_file_info(); my_free((char*) global_system_variables.date_format, MYF(MY_ALLOW_ZERO_PTR)); my_free((char*) global_system_variables.time_format, MYF(MY_ALLOW_ZERO_PTR)); my_free((char*) global_system_variables.datetime_format, MYF(MY_ALLOW_ZERO_PTR)); if (defaults_argv) free_defaults(defaults_argv); my_free(sys_init_connect.value, MYF(MY_ALLOW_ZERO_PTR)); my_free(sys_init_slave.value, MYF(MY_ALLOW_ZERO_PTR)); free_tmpdir(&mysql_tmpdir_list); #ifdef HAVE_REPLICATION my_free(slave_load_tmpdir,MYF(MY_ALLOW_ZERO_PTR)); #endif x_free(opt_bin_logname); x_free(opt_relay_logname); bitmap_free(&temp_pool); free_max_user_conn(); #ifdef HAVE_REPLICATION end_slave_list(); #endif delete binlog_filter; delete rpl_filter; #ifdef HAVE_OPENSSL if (ssl_acceptor_fd) my_free((gptr) ssl_acceptor_fd, MYF(MY_ALLOW_ZERO_PTR)); #endif /* HAVE_OPENSSL */ #ifdef USE_REGEX my_regex_end(); #endif if (print_message && errmesg) sql_print_information(ER(ER_SHUTDOWN_COMPLETE),my_progname); #if !defined(EMBEDDED_LIBRARY) if (!opt_bootstrap) (void) my_delete(pidfile_name,MYF(0)); // This may not always exist #endif finish_client_errs(); my_free((gptr) my_error_unregister(ER_ERROR_FIRST, ER_ERROR_LAST), MYF(MY_WME | MY_FAE | MY_ALLOW_ZERO_PTR)); DBUG_PRINT("quit", ("Error messages freed")); /* Tell main we are ready */ (void) pthread_mutex_lock(&LOCK_thread_count); DBUG_PRINT("quit", ("got thread count lock")); ready_to_exit=1; /* do the broadcast inside the lock to ensure that my_end() is not called */ (void) pthread_cond_broadcast(&COND_thread_count); (void) pthread_mutex_unlock(&LOCK_thread_count); /* The following lines may never be executed as the main thread may have killed us */ DBUG_PRINT("quit", ("done with cleanup")); } /* clean_up */ /* This is mainly needed when running with purify, but it's still nice to know that all child threads have died when mysqld exits */ static void wait_for_signal_thread_to_end() { #ifndef __NETWARE__ uint i; /* Wait up to 10 seconds for signal thread to die. We use this mainly to avoid getting warnings that my_thread_end has not been called */ for (i= 0 ; i < 100 && signal_thread_in_use; i++) { if (pthread_kill(signal_thread, MYSQL_KILL_SIGNAL)) break; my_sleep(100); // Give it time to die } #endif } static void clean_up_mutexes() { (void) pthread_mutex_destroy(&LOCK_mysql_create_db); (void) pthread_mutex_destroy(&LOCK_Acl); (void) rwlock_destroy(&LOCK_grant); (void) pthread_mutex_destroy(&LOCK_open); (void) pthread_mutex_destroy(&LOCK_thread_count); (void) pthread_mutex_destroy(&LOCK_mapped_file); (void) pthread_mutex_destroy(&LOCK_status); (void) pthread_mutex_destroy(&LOCK_error_log); (void) pthread_mutex_destroy(&LOCK_delayed_insert); (void) pthread_mutex_destroy(&LOCK_delayed_status); (void) pthread_mutex_destroy(&LOCK_delayed_create); (void) pthread_mutex_destroy(&LOCK_manager); (void) pthread_mutex_destroy(&LOCK_crypt); (void) pthread_mutex_destroy(&LOCK_bytes_sent); (void) pthread_mutex_destroy(&LOCK_bytes_received); (void) pthread_mutex_destroy(&LOCK_user_conn); #ifdef HAVE_OPENSSL (void) pthread_mutex_destroy(&LOCK_des_key_file); #ifndef HAVE_YASSL for (int i= 0; i < CRYPTO_num_locks(); ++i) (void) rwlock_destroy(&openssl_stdlocks[i].lock); OPENSSL_free(openssl_stdlocks); #endif #endif #ifdef HAVE_REPLICATION (void) pthread_mutex_destroy(&LOCK_rpl_status); (void) pthread_cond_destroy(&COND_rpl_status); #endif (void) pthread_mutex_destroy(&LOCK_active_mi); (void) rwlock_destroy(&LOCK_sys_init_connect); (void) rwlock_destroy(&LOCK_sys_init_slave); (void) pthread_mutex_destroy(&LOCK_global_system_variables); (void) pthread_mutex_destroy(&LOCK_global_read_lock); (void) pthread_mutex_destroy(&LOCK_uuid_generator); (void) pthread_cond_destroy(&COND_thread_count); (void) pthread_cond_destroy(&COND_refresh); (void) pthread_cond_destroy(&COND_thread_cache); (void) pthread_cond_destroy(&COND_flush_thread_cache); (void) pthread_cond_destroy(&COND_manager); } /**************************************************************************** ** Init IP and UNIX socket ****************************************************************************/ static void set_ports() { char *env; if (!mysqld_port && !opt_disable_networking) { // Get port if not from commandline struct servent *serv_ptr; mysqld_port= MYSQL_PORT; if ((serv_ptr= getservbyname("mysql", "tcp"))) mysqld_port= ntohs((u_short) serv_ptr->s_port); /* purecov: inspected */ if ((env = getenv("MYSQL_TCP_PORT"))) mysqld_port= (uint) atoi(env); /* purecov: inspected */ } if (!mysqld_unix_port) { #ifdef __WIN__ mysqld_unix_port= (char*) MYSQL_NAMEDPIPE; #else mysqld_unix_port= (char*) MYSQL_UNIX_ADDR; #endif if ((env = getenv("MYSQL_UNIX_PORT"))) mysqld_unix_port= env; /* purecov: inspected */ } } #ifndef EMBEDDED_LIBRARY /* Change to run as another user if started with --user */ static struct passwd *check_user(const char *user) { #if !defined(__WIN__) && !defined(OS2) && !defined(__NETWARE__) struct passwd *user_info; uid_t user_id= geteuid(); // Don't bother if we aren't superuser if (user_id) { if (user) { // Don't give a warning, if real user is same as given with --user user_info= getpwnam(user); if ((!user_info || user_id != user_info->pw_uid) && global_system_variables.log_warnings) sql_print_warning( "One can only use the --user switch if running as root\n"); } return NULL; } if (!user) { if (!opt_bootstrap) { sql_print_error("Fatal error: Please read \"Security\" section of the manual to find out how to run mysqld as root!\n"); unireg_abort(1); } return NULL; } if (!strcmp(user,"root")) return NULL; // Avoid problem with dynamic libraries if (!(user_info= getpwnam(user))) { // Allow a numeric uid to be used const char *pos; for (pos= user; my_isdigit(mysqld_charset,*pos); pos++) ; if (*pos) // Not numeric id goto err; if (!(user_info= getpwuid(atoi(user)))) goto err; else return user_info; } else return user_info; err: sql_print_error("Fatal error: Can't change to run as user '%s' ; Please check that the user exists!\n",user); unireg_abort(1); #endif return NULL; } static void set_user(const char *user, struct passwd *user_info) { #if !defined(__WIN__) && !defined(OS2) && !defined(__NETWARE__) DBUG_ASSERT(user_info != 0); #ifdef HAVE_INITGROUPS /* We can get a SIGSEGV when calling initgroups() on some systems when NSS is configured to use LDAP and the server is statically linked. We set calling_initgroups as a flag to the SIGSEGV handler that is then used to output a specific message to help the user resolve this problem. */ calling_initgroups= TRUE; initgroups((char*) user, user_info->pw_gid); calling_initgroups= FALSE; #endif if (setgid(user_info->pw_gid) == -1) { sql_perror("setgid"); unireg_abort(1); } if (setuid(user_info->pw_uid) == -1) { sql_perror("setuid"); unireg_abort(1); } #endif } static void set_effective_user(struct passwd *user_info) { #if !defined(__WIN__) && !defined(OS2) && !defined(__NETWARE__) DBUG_ASSERT(user_info != 0); if (setregid((gid_t)-1, user_info->pw_gid) == -1) { sql_perror("setregid"); unireg_abort(1); } if (setreuid((uid_t)-1, user_info->pw_uid) == -1) { sql_perror("setreuid"); unireg_abort(1); } #endif } /* Change root user if started with --chroot */ static void set_root(const char *path) { #if !defined(__WIN__) && !defined(__EMX__) && !defined(OS2) && !defined(__NETWARE__) if (chroot(path) == -1) { sql_perror("chroot"); unireg_abort(1); } my_setwd("/", MYF(0)); #endif } static void network_init(void) { struct sockaddr_in IPaddr; #ifdef HAVE_SYS_UN_H struct sockaddr_un UNIXaddr; #endif int arg=1; DBUG_ENTER("network_init"); set_ports(); if (mysqld_port != 0 && !opt_disable_networking && !opt_bootstrap) { DBUG_PRINT("general",("IP Socket is %d",mysqld_port)); ip_sock = socket(AF_INET, SOCK_STREAM, 0); if (ip_sock == INVALID_SOCKET) { DBUG_PRINT("error",("Got error: %d from socket()",socket_errno)); sql_perror(ER(ER_IPSOCK_ERROR)); /* purecov: tested */ unireg_abort(1); /* purecov: tested */ } bzero((char*) &IPaddr, sizeof(IPaddr)); IPaddr.sin_family = AF_INET; IPaddr.sin_addr.s_addr = my_bind_addr; IPaddr.sin_port = (unsigned short) htons((unsigned short) mysqld_port); #ifndef __WIN__ /* We should not use SO_REUSEADDR on windows as this would enable a user to open two mysqld servers with the same TCP/IP port. */ (void) setsockopt(ip_sock,SOL_SOCKET,SO_REUSEADDR,(char*)&arg,sizeof(arg)); #endif /* __WIN__ */ if (bind(ip_sock, my_reinterpret_cast(struct sockaddr *) (&IPaddr), sizeof(IPaddr)) < 0) { DBUG_PRINT("error",("Got error: %d from bind",socket_errno)); sql_perror("Can't start server: Bind on TCP/IP port"); sql_print_error("Do you already have another mysqld server running on port: %d ?",mysqld_port); unireg_abort(1); } if (listen(ip_sock,(int) back_log) < 0) { sql_perror("Can't start server: listen() on TCP/IP port"); sql_print_error("listen() on TCP/IP failed with error %d", socket_errno); unireg_abort(1); } } #ifdef __NT__ /* create named pipe */ if (Service.IsNT() && mysqld_unix_port[0] && !opt_bootstrap && opt_enable_named_pipe) { pipe_name[sizeof(pipe_name)-1]= 0; /* Safety if too long string */ strxnmov(pipe_name, sizeof(pipe_name)-1, "\\\\.\\pipe\\", mysqld_unix_port, NullS); bzero((char*) &saPipeSecurity, sizeof(saPipeSecurity)); bzero((char*) &sdPipeDescriptor, sizeof(sdPipeDescriptor)); if (!InitializeSecurityDescriptor(&sdPipeDescriptor, SECURITY_DESCRIPTOR_REVISION)) { sql_perror("Can't start server : Initialize security descriptor"); unireg_abort(1); } if (!SetSecurityDescriptorDacl(&sdPipeDescriptor, TRUE, NULL, FALSE)) { sql_perror("Can't start server : Set security descriptor"); unireg_abort(1); } saPipeSecurity.nLength = sizeof(SECURITY_ATTRIBUTES); saPipeSecurity.lpSecurityDescriptor = &sdPipeDescriptor; saPipeSecurity.bInheritHandle = FALSE; if ((hPipe= CreateNamedPipe(pipe_name, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_READMODE_BYTE | PIPE_WAIT, PIPE_UNLIMITED_INSTANCES, (int) global_system_variables.net_buffer_length, (int) global_system_variables.net_buffer_length, NMPWAIT_USE_DEFAULT_WAIT, &saPipeSecurity)) == INVALID_HANDLE_VALUE) { LPVOID lpMsgBuf; int error=GetLastError(); FormatMessage(FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM, NULL, error, MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT), (LPTSTR) &lpMsgBuf, 0, NULL ); MessageBox(NULL, (LPTSTR) lpMsgBuf, "Error from CreateNamedPipe", MB_OK|MB_ICONINFORMATION); LocalFree(lpMsgBuf); unireg_abort(1); } } #endif #if defined(HAVE_SYS_UN_H) /* ** Create the UNIX socket */ if (mysqld_unix_port[0] && !opt_bootstrap) { DBUG_PRINT("general",("UNIX Socket is %s",mysqld_unix_port)); if (strlen(mysqld_unix_port) > (sizeof(UNIXaddr.sun_path) - 1)) { sql_print_error("The socket file path is too long (> %d): %s", sizeof(UNIXaddr.sun_path) - 1, mysqld_unix_port); unireg_abort(1); } if ((unix_sock= socket(AF_UNIX, SOCK_STREAM, 0)) < 0) { sql_perror("Can't start server : UNIX Socket "); /* purecov: inspected */ unireg_abort(1); /* purecov: inspected */ } bzero((char*) &UNIXaddr, sizeof(UNIXaddr)); UNIXaddr.sun_family = AF_UNIX; strmov(UNIXaddr.sun_path, mysqld_unix_port); (void) unlink(mysqld_unix_port); (void) setsockopt(unix_sock,SOL_SOCKET,SO_REUSEADDR,(char*)&arg, sizeof(arg)); umask(0); if (bind(unix_sock, my_reinterpret_cast(struct sockaddr *) (&UNIXaddr), sizeof(UNIXaddr)) < 0) { sql_perror("Can't start server : Bind on unix socket"); /* purecov: tested */ sql_print_error("Do you already have another mysqld server running on socket: %s ?",mysqld_unix_port); unireg_abort(1); /* purecov: tested */ } umask(((~my_umask) & 0666)); #if defined(S_IFSOCK) && defined(SECURE_SOCKETS) (void) chmod(mysqld_unix_port,S_IFSOCK); /* Fix solaris 2.6 bug */ #endif if (listen(unix_sock,(int) back_log) < 0) sql_print_warning("listen() on Unix socket failed with error %d", socket_errno); } #endif DBUG_PRINT("info",("server started")); DBUG_VOID_RETURN; } #endif /*!EMBEDDED_LIBRARY*/ void yyerror(const char *s) { THD *thd=current_thd; char *yytext= (char*) thd->lex->tok_start; /* "parse error" changed into "syntax error" between bison 1.75 and 1.875 */ if (strcmp(s,"parse error") == 0 || strcmp(s,"syntax error") == 0) s=ER(ER_SYNTAX_ERROR); my_printf_error(ER_PARSE_ERROR, ER(ER_PARSE_ERROR), MYF(0), s, (yytext ? (char*) yytext : ""), thd->lex->yylineno); } #ifndef EMBEDDED_LIBRARY /* Close a connection SYNOPSIS close_connection() thd Thread handle errcode Error code to print to console lock 1 if we have have to lock LOCK_thread_count NOTES For the connection that is doing shutdown, this is called twice */ void close_connection(THD *thd, uint errcode, bool lock) { st_vio *vio; DBUG_ENTER("close_connection"); DBUG_PRINT("enter",("fd: %s error: '%s'", thd->net.vio ? vio_description(thd->net.vio) : "(not connected)", errcode ? ER(errcode) : "")); if (lock) (void) pthread_mutex_lock(&LOCK_thread_count); thd->killed= THD::KILL_CONNECTION; if ((vio= thd->net.vio) != 0) { if (errcode) net_send_error(thd, errcode, ER(errcode)); /* purecov: inspected */ vio_close(vio); /* vio is freed in delete thd */ } if (lock) (void) pthread_mutex_unlock(&LOCK_thread_count); DBUG_VOID_RETURN; } #endif /* EMBEDDED_LIBRARY */ /* Called when a thread is aborted */ /* ARGSUSED */ extern "C" sig_handler end_thread_signal(int sig __attribute__((unused))) { THD *thd=current_thd; DBUG_ENTER("end_thread_signal"); if (thd && ! thd->bootstrap) { statistic_increment(killed_threads, &LOCK_status); end_thread(thd,0); } DBUG_VOID_RETURN; /* purecov: deadcode */ } void end_thread(THD *thd, bool put_in_cache) { DBUG_ENTER("end_thread"); thd->cleanup(); (void) pthread_mutex_lock(&LOCK_thread_count); thread_count--; delete thd; if (put_in_cache && cached_thread_count < thread_cache_size && ! abort_loop && !kill_cached_threads) { /* Don't kill the thread, just put it in cache for reuse */ DBUG_PRINT("info", ("Adding thread to cache")) cached_thread_count++; while (!abort_loop && ! wake_thread && ! kill_cached_threads) (void) pthread_cond_wait(&COND_thread_cache, &LOCK_thread_count); cached_thread_count--; if (kill_cached_threads) pthread_cond_signal(&COND_flush_thread_cache); if (wake_thread) { wake_thread--; thd=thread_cache.get(); thd->real_id=pthread_self(); (void) thd->store_globals(); thd->thr_create_time= time(NULL); threads.append(thd); pthread_mutex_unlock(&LOCK_thread_count); DBUG_VOID_RETURN; } } DBUG_PRINT("info", ("sending a broadcast")) /* Tell main we are ready */ (void) pthread_mutex_unlock(&LOCK_thread_count); /* It's safe to broadcast outside a lock (COND... is not deleted here) */ (void) pthread_cond_broadcast(&COND_thread_count); DBUG_PRINT("info", ("unlocked thread_count mutex")) #ifdef ONE_THREAD if (!(test_flags & TEST_NO_THREADS)) // For debugging under Linux #endif { my_thread_end(); pthread_exit(0); } DBUG_VOID_RETURN; } /* Start a cached thread. LOCK_thread_count is locked on entry */ static void start_cached_thread(THD *thd) { thread_cache.append(thd); wake_thread++; thread_count++; pthread_cond_signal(&COND_thread_cache); } void flush_thread_cache() { (void) pthread_mutex_lock(&LOCK_thread_count); kill_cached_threads++; while (cached_thread_count) { pthread_cond_broadcast(&COND_thread_cache); pthread_cond_wait(&COND_flush_thread_cache,&LOCK_thread_count); } kill_cached_threads--; (void) pthread_mutex_unlock(&LOCK_thread_count); } /* Aborts a thread nicely. Commes here on SIGPIPE TODO: One should have to fix that thr_alarm know about this thread too. */ #ifdef THREAD_SPECIFIC_SIGPIPE extern "C" sig_handler abort_thread(int sig __attribute__((unused))) { THD *thd=current_thd; DBUG_ENTER("abort_thread"); if (thd) thd->killed= THD::KILL_CONNECTION; DBUG_VOID_RETURN; } #endif /****************************************************************************** Setup a signal thread with handles all signals. Because Linux doesn't support schemas use a mutex to check that the signal thread is ready before continuing ******************************************************************************/ #if defined(__WIN__) || defined(OS2) static void init_signals(void) { int signals[] = {SIGINT,SIGILL,SIGFPE,SIGSEGV,SIGTERM,SIGABRT } ; for (uint i=0 ; i < sizeof(signals)/sizeof(int) ; i++) signal(signals[i], kill_server) ; #if defined(__WIN__) signal(SIGBREAK,SIG_IGN); //ignore SIGBREAK for NT #else signal(SIGBREAK, kill_server); #endif } static void start_signal_handler(void) { // Save vm id of this process if (!opt_bootstrap) create_pid_file(); } static void check_data_home(const char *path) {} #elif defined(__NETWARE__) // down server event callback void mysql_down_server_cb(void *, void *) { event_flag= TRUE; kill_server(0); } // destroy callback resources void mysql_cb_destroy(void *) { UnRegisterEventNotification(eh); // cleanup down event notification NX_UNWRAP_INTERFACE(ref); /* Deregister NSS volume deactivation event */ NX_UNWRAP_INTERFACE(refneb); if (neb_consumer_id) UnRegisterConsumer(neb_consumer_id, NULL); } // initialize callbacks void mysql_cb_init() { // register for down server event void *handle = getnlmhandle(); rtag_t rt= AllocateResourceTag(handle, "MySQL Down Server Callback", EventSignature); NX_WRAP_INTERFACE((void *)mysql_down_server_cb, 2, (void **)&ref); eh= RegisterForEventNotification(rt, EVENT_PRE_DOWN_SERVER, EVENT_PRIORITY_APPLICATION, NULL, ref, NULL); /* Register for volume deactivation event Wrap the callback function, as it is called by non-LibC thread */ (void *) NX_WRAP_INTERFACE(neb_event_callback, 1, &refneb); registerwithneb(); NXVmRegisterExitHandler(mysql_cb_destroy, NULL); // clean-up } /* To get the name of the NetWare volume having MySQL data folder */ static void getvolumename() { char *p; /* We assume that data path is already set. If not it won't come here. Terminate after volume name */ if ((p= strchr(mysql_real_data_home, ':'))) strmake(datavolname, mysql_real_data_home, (uint) (p - mysql_real_data_home)); } /* Registering with NEB for NSS Volume Deactivation event */ static void registerwithneb() { ConsumerRegistrationInfo reg_info; /* Clear NEB registration structure */ bzero((char*) ®_info, sizeof(struct ConsumerRegistrationInfo)); /* Fill the NEB consumer information structure */ reg_info.CRIVersion= 1; // NEB version /* NEB Consumer name */ reg_info.CRIConsumerName= (BYTE *) "MySQL Database Server"; /* Event of interest */ reg_info.CRIEventName= (BYTE *) "NSS.ChangeVolState.Enter"; reg_info.CRIUserParameter= NULL; // Consumer Info reg_info.CRIEventFlags= 0; // Event flags /* Consumer NLM handle */ reg_info.CRIOwnerID= (LoadDefinitionStructure *)getnlmhandle(); reg_info.CRIConsumerESR= NULL; // No consumer ESR required reg_info.CRISecurityToken= 0; // No security token for the event reg_info.CRIConsumerFlags= 0; // SMP_ENABLED_BIT; reg_info.CRIFilterName= 0; // No event filtering reg_info.CRIFilterDataLength= 0; // No filtering data reg_info.CRIFilterData= 0; // No filtering data /* Callback function for the event */ (void *)reg_info.CRIConsumerCallback= (void *) refneb; reg_info.CRIOrder= 0; // Event callback order reg_info.CRIConsumerType= CHECK_CONSUMER; // Consumer type /* Register for the event with NEB */ if (RegisterConsumer(®_info)) { consoleprintf("Failed to register for NSS Volume Deactivation event \n"); return; } /* This ID is required for deregistration */ neb_consumer_id= reg_info.CRIConsumerID; /* Get MySQL data volume name, stored in global variable datavolname */ getvolumename(); /* Get the NSS volume ID of the MySQL Data volume. Volume ID is stored in a global variable */ getvolumeID((BYTE*) datavolname); } /* Callback for NSS Volume Deactivation event */ ulong neb_event_callback(struct EventBlock *eblock) { EventChangeVolStateEnter_s *voldata; extern bool nw_panic; voldata= (EventChangeVolStateEnter_s *)eblock->EBEventData; /* Deactivation of a volume */ if ((voldata->oldState == zVOLSTATE_ACTIVE && voldata->newState == zVOLSTATE_DEACTIVE || voldata->newState == zVOLSTATE_MAINTENANCE)) { /* Ensure that we bring down MySQL server only for MySQL data volume deactivation */ if (!memcmp(&voldata->volID, &datavolid, sizeof(VolumeID_t))) { consoleprintf("MySQL data volume is deactivated, shutting down MySQL Server \n"); event_flag= TRUE; nw_panic = TRUE; event_flag= TRUE; kill_server(0); } } return 0; } /* Function to get NSS volume ID of the MySQL data */ #define ADMIN_VOL_PATH "_ADMIN:/Volumes/" static void getvolumeID(BYTE *volumeName) { char path[zMAX_FULL_NAME]; Key_t rootKey= 0, fileKey= 0; QUAD getInfoMask; zInfo_s info; STATUS status; /* Get the root key */ if ((status= zRootKey(0, &rootKey)) != zOK) { consoleprintf("\nGetNSSVolumeProperties - Failed to get root key, status: %d\n.", (int) status); goto exit; } /* Get the file key. This is the key to the volume object in the NSS admin volumes directory. */ strxmov(path, (const char *) ADMIN_VOL_PATH, (const char *) volumeName, NullS); if ((status= zOpen(rootKey, zNSS_TASK, zNSPACE_LONG|zMODE_UTF8, (BYTE *) path, zRR_READ_ACCESS, &fileKey)) != zOK) { consoleprintf("\nGetNSSVolumeProperties - Failed to get file, status: %d\n.", (int) status); goto exit; } getInfoMask= zGET_IDS | zGET_VOLUME_INFO ; if ((status= zGetInfo(fileKey, getInfoMask, sizeof(info), zINFO_VERSION_A, &info)) != zOK) { consoleprintf("\nGetNSSVolumeProperties - Failed in zGetInfo, status: %d\n.", (int) status); goto exit; } /* Copy the data to global variable */ datavolid.timeLow= info.vol.volumeID.timeLow; datavolid.timeMid= info.vol.volumeID.timeMid; datavolid.timeHighAndVersion= info.vol.volumeID.timeHighAndVersion; datavolid.clockSeqHighAndReserved= info.vol.volumeID.clockSeqHighAndReserved; datavolid.clockSeqLow= info.vol.volumeID.clockSeqLow; /* This is guranteed to be 6-byte length (but sizeof() would be better) */ memcpy(datavolid.node, info.vol.volumeID.node, (unsigned int) 6); exit: if (rootKey) zClose(rootKey); if (fileKey) zClose(fileKey); } static void init_signals(void) { int signals[] = {SIGINT,SIGILL,SIGFPE,SIGSEGV,SIGTERM,SIGABRT}; for (uint i=0 ; i < sizeof(signals)/sizeof(int) ; i++) signal(signals[i], kill_server); mysql_cb_init(); // initialize callbacks } static void start_signal_handler(void) { // Save vm id of this process if (!opt_bootstrap) create_pid_file(); // no signal handler } /* Warn if the data is on a Traditional volume NOTE Already done by mysqld_safe */ static void check_data_home(const char *path) { } #elif defined(__EMX__) static void sig_reload(int signo) { // Flush everything bool not_used; reload_acl_and_cache((THD*) 0,REFRESH_LOG, (TABLE_LIST*) 0, ¬_used); signal(signo, SIG_ACK); } static void sig_kill(int signo) { if (!kill_in_progress) { abort_loop=1; // mark abort for threads kill_server((void*) signo); } signal(signo, SIG_ACK); } static void init_signals(void) { signal(SIGQUIT, sig_kill); signal(SIGKILL, sig_kill); signal(SIGTERM, sig_kill); signal(SIGINT, sig_kill); signal(SIGHUP, sig_reload); // Flush everything signal(SIGALRM, SIG_IGN); signal(SIGBREAK,SIG_IGN); signal_thread = pthread_self(); } static void start_signal_handler(void) {} static void check_data_home(const char *path) {} #else /* if ! __WIN__ && ! __EMX__ */ #ifdef HAVE_LINUXTHREADS #define UNSAFE_DEFAULT_LINUX_THREADS 200 #endif extern "C" sig_handler handle_segfault(int sig) { THD *thd=current_thd; /* Strictly speaking, one needs a mutex here but since we have got SIGSEGV already, things are a mess so not having the mutex is not as bad as possibly using a buggy mutex - so we keep things simple */ if (segfaulted) { fprintf(stderr, "Fatal signal %d while backtracing\n", sig); exit(1); } segfaulted = 1; fprintf(stderr,"\ mysqld got signal %d;\n\ This could be because you hit a bug. It is also possible that this binary\n\ or one of the libraries it was linked against is corrupt, improperly built,\n\ or misconfigured. This error can also be caused by malfunctioning hardware.\n", sig); fprintf(stderr, "\ We will try our best to scrape up some info that will hopefully help diagnose\n\ the problem, but since we have already crashed, something is definitely wrong\n\ and this may fail.\n\n"); fprintf(stderr, "key_buffer_size=%lu\n", (ulong) dflt_key_cache->key_cache_mem_size); fprintf(stderr, "read_buffer_size=%ld\n", (long) global_system_variables.read_buff_size); fprintf(stderr, "max_used_connections=%lu\n", max_used_connections); fprintf(stderr, "max_connections=%lu\n", max_connections); fprintf(stderr, "threads_connected=%u\n", thread_count); fprintf(stderr, "It is possible that mysqld could use up to \n\ key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = %lu K\n\ bytes of memory\n", ((ulong) dflt_key_cache->key_cache_mem_size + (global_system_variables.read_buff_size + global_system_variables.sortbuff_size) * max_connections)/ 1024); fprintf(stderr, "Hope that's ok; if not, decrease some variables in the equation.\n\n"); #if defined(HAVE_LINUXTHREADS) if (sizeof(char*) == 4 && thread_count > UNSAFE_DEFAULT_LINUX_THREADS) { fprintf(stderr, "\ You seem to be running 32-bit Linux and have %d concurrent connections.\n\ If you have not changed STACK_SIZE in LinuxThreads and built the binary \n\ yourself, LinuxThreads is quite likely to steal a part of the global heap for\n\ the thread stack. Please read http://www.mysql.com/doc/en/Linux.html\n\n", thread_count); } #endif /* HAVE_LINUXTHREADS */ #ifdef HAVE_STACKTRACE if (!(test_flags & TEST_NO_STACKTRACE)) { fprintf(stderr,"thd=%p\n",thd); print_stacktrace(thd ? (gptr) thd->thread_stack : (gptr) 0, thread_stack); } if (thd) { fprintf(stderr, "Trying to get some variables.\n\ Some pointers may be invalid and cause the dump to abort...\n"); safe_print_str("thd->query", thd->query, 1024); fprintf(stderr, "thd->thread_id=%lu\n", (ulong) thd->thread_id); } fprintf(stderr, "\ The manual page at http://www.mysql.com/doc/en/Crashing.html contains\n\ information that should help you find out what is causing the crash.\n"); fflush(stderr); #endif /* HAVE_STACKTRACE */ #ifdef HAVE_INITGROUPS if (calling_initgroups) fprintf(stderr, "\n\ This crash occured while the server was calling initgroups(). This is\n\ often due to the use of a mysqld that is statically linked against glibc\n\ and configured to use LDAP in /etc/nsswitch.conf. You will need to either\n\ upgrade to a version of glibc that does not have this problem (2.3.4 or\n\ later when used with nscd), disable LDAP in your nsswitch.conf, or use a\n\ mysqld that is not statically linked.\n"); #endif if (test_flags & TEST_CORE_ON_SIGNAL) { fprintf(stderr, "Writing a core file\n"); fflush(stderr); write_core(sig); } exit(1); } #ifndef SA_RESETHAND #define SA_RESETHAND 0 #endif #ifndef SA_NODEFER #define SA_NODEFER 0 #endif static void init_signals(void) { sigset_t set; struct sigaction sa; DBUG_ENTER("init_signals"); if (test_flags & TEST_SIGINT) my_sigset(THR_KILL_SIGNAL,end_thread_signal); my_sigset(THR_SERVER_ALARM,print_signal_warning); // Should never be called! if (!(test_flags & TEST_NO_STACKTRACE) || (test_flags & TEST_CORE_ON_SIGNAL)) { sa.sa_flags = SA_RESETHAND | SA_NODEFER; sigemptyset(&sa.sa_mask); sigprocmask(SIG_SETMASK,&sa.sa_mask,NULL); init_stacktrace(); #if defined(__amiga__) sa.sa_handler=(void(*)())handle_segfault; #else sa.sa_handler=handle_segfault; #endif sigaction(SIGSEGV, &sa, NULL); sigaction(SIGABRT, &sa, NULL); #ifdef SIGBUS sigaction(SIGBUS, &sa, NULL); #endif sigaction(SIGILL, &sa, NULL); sigaction(SIGFPE, &sa, NULL); } #ifdef HAVE_GETRLIMIT if (test_flags & TEST_CORE_ON_SIGNAL) { /* Change limits so that we will get a core file */ STRUCT_RLIMIT rl; rl.rlim_cur = rl.rlim_max = RLIM_INFINITY; if (setrlimit(RLIMIT_CORE, &rl) && global_system_variables.log_warnings) sql_print_warning("setrlimit could not change the size of core files to 'infinity'; We may not be able to generate a core file on signals"); } #endif (void) sigemptyset(&set); my_sigset(SIGPIPE,SIG_IGN); sigaddset(&set,SIGPIPE); sigaddset(&set,SIGINT); #ifndef IGNORE_SIGHUP_SIGQUIT sigaddset(&set,SIGQUIT); sigaddset(&set,SIGHUP); #endif sigaddset(&set,SIGTERM); /* Fix signals if blocked by parents (can happen on Mac OS X) */ sigemptyset(&sa.sa_mask); sa.sa_flags = 0; sa.sa_handler = print_signal_warning; sigaction(SIGTERM, &sa, (struct sigaction*) 0); sa.sa_flags = 0; sa.sa_handler = print_signal_warning; sigaction(SIGHUP, &sa, (struct sigaction*) 0); #ifdef SIGTSTP sigaddset(&set,SIGTSTP); #endif sigaddset(&set,THR_SERVER_ALARM); if (test_flags & TEST_SIGINT) sigdelset(&set,THR_KILL_SIGNAL); // May be SIGINT sigdelset(&set,THR_CLIENT_ALARM); // For alarms sigprocmask(SIG_SETMASK,&set,NULL); pthread_sigmask(SIG_SETMASK,&set,NULL); DBUG_VOID_RETURN; } #ifndef EMBEDDED_LIBRARY static void start_signal_handler(void) { int error; pthread_attr_t thr_attr; DBUG_ENTER("start_signal_handler"); (void) pthread_attr_init(&thr_attr); #if !defined(HAVE_DEC_3_2_THREADS) pthread_attr_setscope(&thr_attr,PTHREAD_SCOPE_SYSTEM); (void) pthread_attr_setdetachstate(&thr_attr,PTHREAD_CREATE_DETACHED); if (!(opt_specialflag & SPECIAL_NO_PRIOR)) my_pthread_attr_setprio(&thr_attr,INTERRUPT_PRIOR); #if defined(__ia64__) || defined(__ia64) /* Peculiar things with ia64 platforms - it seems we only have half the stack size in reality, so we have to double it here */ pthread_attr_setstacksize(&thr_attr,thread_stack*2); #else pthread_attr_setstacksize(&thr_attr,thread_stack); #endif #endif (void) pthread_mutex_lock(&LOCK_thread_count); if ((error=pthread_create(&signal_thread,&thr_attr,signal_hand,0))) { sql_print_error("Can't create interrupt-thread (error %d, errno: %d)", error,errno); exit(1); } (void) pthread_cond_wait(&COND_thread_count,&LOCK_thread_count); pthread_mutex_unlock(&LOCK_thread_count); (void) pthread_attr_destroy(&thr_attr); DBUG_VOID_RETURN; } /* This threads handles all signals and alarms */ /* ARGSUSED */ pthread_handler_t signal_hand(void *arg __attribute__((unused))) { sigset_t set; int sig; my_thread_init(); // Init new thread DBUG_ENTER("signal_hand"); signal_thread_in_use= 1; /* Setup alarm handler This should actually be '+ max_number_of_slaves' instead of +10, but the +10 should be quite safe. */ init_thr_alarm(max_connections + global_system_variables.max_insert_delayed_threads + 10); #if SIGINT != THR_KILL_SIGNAL if (test_flags & TEST_SIGINT) { (void) sigemptyset(&set); // Setup up SIGINT for debug (void) sigaddset(&set,SIGINT); // For debugging (void) pthread_sigmask(SIG_UNBLOCK,&set,NULL); } #endif (void) sigemptyset(&set); // Setup up SIGINT for debug #ifdef USE_ONE_SIGNAL_HAND (void) sigaddset(&set,THR_SERVER_ALARM); // For alarms #endif #ifndef IGNORE_SIGHUP_SIGQUIT (void) sigaddset(&set,SIGQUIT); #if THR_CLIENT_ALARM != SIGHUP (void) sigaddset(&set,SIGHUP); #endif #endif (void) sigaddset(&set,SIGTERM); (void) sigaddset(&set,SIGTSTP); /* Save pid to this process (or thread on Linux) */ if (!opt_bootstrap) create_pid_file(); #ifdef HAVE_STACK_TRACE_ON_SEGV if (opt_do_pstack) { sprintf(pstack_file_name,"mysqld-%lu-%%d-%%d.backtrace", (ulong)getpid()); pstack_install_segv_action(pstack_file_name); } #endif /* HAVE_STACK_TRACE_ON_SEGV */ /* signal to start_signal_handler that we are ready This works by waiting for start_signal_handler to free mutex, after which we signal it that we are ready. At this pointer there is no other threads running, so there should not be any other pthread_cond_signal() calls. */ (void) pthread_mutex_lock(&LOCK_thread_count); (void) pthread_mutex_unlock(&LOCK_thread_count); (void) pthread_cond_broadcast(&COND_thread_count); (void) pthread_sigmask(SIG_BLOCK,&set,NULL); for (;;) { int error; // Used when debugging if (shutdown_in_progress && !abort_loop) { sig= SIGTERM; error=0; } else while ((error=my_sigwait(&set,&sig)) == EINTR) ; if (cleanup_done) { DBUG_PRINT("quit",("signal_handler: calling my_thread_end()")); my_thread_end(); signal_thread_in_use= 0; pthread_exit(0); // Safety } switch (sig) { case SIGTERM: case SIGQUIT: case SIGKILL: #ifdef EXTRA_DEBUG sql_print_information("Got signal %d to shutdown mysqld",sig); #endif DBUG_PRINT("info",("Got signal: %d abort_loop: %d",sig,abort_loop)); if (!abort_loop) { abort_loop=1; // mark abort for threads #ifdef USE_ONE_SIGNAL_HAND pthread_t tmp; if (!(opt_specialflag & SPECIAL_NO_PRIOR)) my_pthread_attr_setprio(&connection_attrib,INTERRUPT_PRIOR); if (pthread_create(&tmp,&connection_attrib, kill_server_thread, (void*) &sig)) sql_print_error("Can't create thread to kill server"); #else kill_server((void*) sig); // MIT THREAD has a alarm thread #endif } break; case SIGHUP: if (!abort_loop) { bool not_used; mysql_print_status(); // Print some debug info reload_acl_and_cache((THD*) 0, (REFRESH_LOG | REFRESH_TABLES | REFRESH_FAST | REFRESH_GRANT | REFRESH_THREADS | REFRESH_HOSTS), (TABLE_LIST*) 0, ¬_used); // Flush logs } break; #ifdef USE_ONE_SIGNAL_HAND case THR_SERVER_ALARM: process_alarm(sig); // Trigger alarms. break; #endif default: #ifdef EXTRA_DEBUG sql_print_warning("Got signal: %d error: %d",sig,error); /* purecov: tested */ #endif break; /* purecov: tested */ } } return(0); /* purecov: deadcode */ } #endif /*!EMBEDDED_LIBRARY*/ static void check_data_home(const char *path) {} #endif /* __WIN__*/ /* All global error messages are sent here where the first one is stored for the client */ /* ARGSUSED */ static int my_message_sql(uint error, const char *str, myf MyFlags) { THD *thd; DBUG_ENTER("my_message_sql"); DBUG_PRINT("error", ("error: %u message: '%s'", error, str)); /* Put here following assertion when situation with EE_* error codes will be fixed DBUG_ASSERT(error != 0); */ if ((thd= current_thd)) { if (thd->spcont && thd->spcont->find_handler(error, MYSQL_ERROR::WARN_LEVEL_ERROR)) { if (! thd->spcont->found_handler_here()) thd->net.report_error= 1; /* Make "select" abort correctly */ DBUG_RETURN(0); } thd->query_error= 1; // needed to catch query errors during replication if (!thd->no_warnings_for_error) push_warning(thd, MYSQL_ERROR::WARN_LEVEL_ERROR, error, str); /* thd->lex->current_select == 0 if lex structure is not inited (not query command (COM_QUERY)) */ if (thd->lex->current_select && thd->lex->current_select->no_error && !thd->is_fatal_error) { DBUG_PRINT("error", ("Error converted to warning: current_select: no_error %d fatal_error: %d", (thd->lex->current_select ? thd->lex->current_select->no_error : 0), (int) thd->is_fatal_error)); } else { NET *net= &thd->net; net->report_error= 1; #ifndef EMBEDDED_LIBRARY /* TODO query cache in embedded library*/ query_cache_abort(net); #endif if (!net->last_error[0]) // Return only first message { strmake(net->last_error, str, sizeof(net->last_error)-1); net->last_errno= error ? error : ER_UNKNOWN_ERROR; } } } if (!thd || MyFlags & ME_NOREFRESH) sql_print_error("%s: %s",my_progname,str); /* purecov: inspected */ DBUG_RETURN(0); } static void *my_str_malloc_mysqld(size_t size) { return my_malloc(size, MYF(MY_FAE)); } static void my_str_free_mysqld(void *ptr) { my_free((gptr)ptr, MYF(MY_FAE)); } #ifdef __WIN__ struct utsname { char nodename[FN_REFLEN]; }; int uname(struct utsname *a) { return -1; } pthread_handler_t handle_shutdown(void *arg) { MSG msg; my_thread_init(); /* this call should create the message queue for this thread */ PeekMessage(&msg, NULL, 1, 65534,PM_NOREMOVE); #if !defined(EMBEDDED_LIBRARY) if (WaitForSingleObject(hEventShutdown,INFINITE)==WAIT_OBJECT_0) #endif /* EMBEDDED_LIBRARY */ kill_server(MYSQL_KILL_SIGNAL); return 0; } int STDCALL handle_kill(ulong ctrl_type) { if (ctrl_type == CTRL_CLOSE_EVENT || ctrl_type == CTRL_SHUTDOWN_EVENT) { kill_server(MYSQL_KILL_SIGNAL); return TRUE; } return FALSE; } #endif #ifdef OS2 pthread_handler_t handle_shutdown(void *arg) { my_thread_init(); // wait semaphore pthread_cond_wait(&eventShutdown, NULL); // close semaphore and kill server pthread_cond_destroy(&eventShutdown); /* Exit main loop on main thread, so kill will be done from main thread (this is thread 2) */ abort_loop = 1; // unblock select() so_cancel(ip_sock); so_cancel(unix_sock); return 0; } #endif static const char *load_default_groups[]= { #ifdef WITH_NDBCLUSTER_STORAGE_ENGINE "mysql_cluster", #endif "mysqld","server", MYSQL_BASE_VERSION, 0, 0}; #if defined(__WIN__) && !defined(EMBEDDED_LIBRARY) static const int load_default_groups_sz= sizeof(load_default_groups)/sizeof(load_default_groups[0]); #endif /* Initialize one of the global date/time format variables SYNOPSIS init_global_datetime_format() format_type What kind of format should be supported var_ptr Pointer to variable that should be updated NOTES The default value is taken from either opt_date_time_formats[] or the ISO format (ANSI SQL) RETURN 0 ok 1 error */ static bool init_global_datetime_format(timestamp_type format_type, DATE_TIME_FORMAT **var_ptr) { /* Get command line option */ const char *str= opt_date_time_formats[format_type]; if (!str) // No specified format { str= get_date_time_format_str(&known_date_time_formats[ISO_FORMAT], format_type); /* Set the "command line" option to point to the generated string so that we can set global formats back to default */ opt_date_time_formats[format_type]= str; } if (!(*var_ptr= date_time_format_make(format_type, str, strlen(str)))) { fprintf(stderr, "Wrong date/time format specifier: %s\n", str); return 1; } return 0; } static int init_common_variables(const char *conf_file_name, int argc, char **argv, const char **groups) { umask(((~my_umask) & 0666)); my_decimal_set_zero(&decimal_zero); // set decimal_zero constant; tzset(); // Set tzname max_system_variables.pseudo_thread_id= (ulong)~0; start_time=time((time_t*) 0); if (init_thread_environment()) return 1; mysql_init_variables(); #ifdef OS2 { // fix timezone for daylight saving struct tm *ts = localtime(&start_time); if (ts->tm_isdst > 0) _timezone -= 3600; } #endif #ifdef HAVE_TZNAME { struct tm tm_tmp; localtime_r(&start_time,&tm_tmp); strmake(system_time_zone, tzname[tm_tmp.tm_isdst != 0 ? 1 : 0], sizeof(system_time_zone)-1); } #endif /* We set SYSTEM time zone as reasonable default and also for failure of my_tz_init() and bootstrap mode. If user explicitly set time zone with --default-time-zone option we will change this value in my_tz_init(). */ global_system_variables.time_zone= my_tz_SYSTEM; /* Init mutexes for the global MYSQL_LOG objects. As safe_mutex depends on what MY_INIT() does, we can't init the mutexes of global MYSQL_LOGs in their constructors, because then they would be inited before MY_INIT(). So we do it here. */ mysql_log.init_pthread_objects(); mysql_slow_log.init_pthread_objects(); mysql_bin_log.init_pthread_objects(); if (gethostname(glob_hostname,sizeof(glob_hostname)-4) < 0) strmov(glob_hostname,"mysql"); strmake(pidfile_name, glob_hostname, sizeof(pidfile_name)-5); strmov(fn_ext(pidfile_name),".pid"); // Add proper extension load_defaults(conf_file_name, groups, &argc, &argv); defaults_argv=argv; get_options(argc,argv); set_server_version(); DBUG_PRINT("info",("%s Ver %s for %s on %s\n",my_progname, server_version, SYSTEM_TYPE,MACHINE_TYPE)); #ifdef HAVE_LARGE_PAGES /* Initialize large page size */ if (opt_large_pages && (opt_large_page_size= my_get_large_page_size())) { my_use_large_pages= 1; my_large_page_size= opt_large_page_size; #ifdef WITH_INNOBASE_STORAGE_ENGINE innobase_use_large_pages= 1; innobase_large_page_size= opt_large_page_size; #endif } #endif /* HAVE_LARGE_PAGES */ /* connections and databases needs lots of files */ { uint files, wanted_files; wanted_files= 10+(uint) max(max_connections*5, max_connections+table_cache_size*2); set_if_bigger(wanted_files, open_files_limit); files= my_set_max_open_files(wanted_files); if (files < wanted_files) { if (!open_files_limit) { max_connections= (ulong) min((files-10),max_connections); table_cache_size= (ulong) max((files-10-max_connections)/2,64); DBUG_PRINT("warning", ("Changed limits: max_open_files: %u max_connections: %ld table_cache: %ld", files, max_connections, table_cache_size)); if (global_system_variables.log_warnings) sql_print_warning("Changed limits: max_open_files: %u max_connections: %ld table_cache: %ld", files, max_connections, table_cache_size); } else if (global_system_variables.log_warnings) sql_print_warning("Could not increase number of max_open_files to more than %u (request: %u)", files, wanted_files); } open_files_limit= files; } unireg_init(opt_specialflag); /* Set up extern variabels */ if (init_errmessage()) /* Read error messages from file */ return 1; init_client_errs(); lex_init(); item_init(); set_var_init(); mysys_uses_curses=0; #ifdef USE_REGEX my_regex_init(&my_charset_latin1); #endif if (!(default_charset_info= get_charset_by_csname(default_character_set_name, MY_CS_PRIMARY, MYF(MY_WME)))) return 1; if (default_collation_name) { CHARSET_INFO *default_collation; default_collation= get_charset_by_name(default_collation_name, MYF(0)); if (!default_collation) { sql_print_error(ER(ER_UNKNOWN_COLLATION), default_collation_name); return 1; } if (!my_charset_same(default_charset_info, default_collation)) { sql_print_error(ER(ER_COLLATION_CHARSET_MISMATCH), default_collation_name, default_charset_info->csname); return 1; } default_charset_info= default_collation; } /* Set collactions that depends on the default collation */ global_system_variables.collation_server= default_charset_info; global_system_variables.collation_database= default_charset_info; global_system_variables.collation_connection= default_charset_info; global_system_variables.character_set_results= default_charset_info; global_system_variables.character_set_client= default_charset_info; global_system_variables.collation_connection= default_charset_info; sys_init_connect.value_length= 0; if ((sys_init_connect.value= opt_init_connect)) sys_init_connect.value_length= strlen(opt_init_connect); else sys_init_connect.value=my_strdup("",MYF(0)); sys_init_slave.value_length= 0; if ((sys_init_slave.value= opt_init_slave)) sys_init_slave.value_length= strlen(opt_init_slave); else sys_init_slave.value=my_strdup("",MYF(0)); if (use_temp_pool && bitmap_init(&temp_pool,0,1024,1)) return 1; if (my_dbopt_init()) return 1; /* Ensure that lower_case_table_names is set on system where we have case insensitive names. If this is not done the users MyISAM tables will get corrupted if accesses with names of different case. */ DBUG_PRINT("info", ("lower_case_table_names: %d", lower_case_table_names)); if (!lower_case_table_names && (lower_case_file_system= (test_if_case_insensitive(mysql_real_data_home) == 1))) { if (lower_case_table_names_used) { if (global_system_variables.log_warnings) sql_print_warning("\ You have forced lower_case_table_names to 0 through a command-line \ option, even though your file system '%s' is case insensitive. This means \ that you can corrupt a MyISAM table by accessing it with different cases. \ You should consider changing lower_case_table_names to 1 or 2", mysql_real_data_home); } else { if (global_system_variables.log_warnings) sql_print_warning("Setting lower_case_table_names=2 because file system for %s is case insensitive", mysql_real_data_home); lower_case_table_names= 2; } } else if (lower_case_table_names == 2 && !(lower_case_file_system= (test_if_case_insensitive(mysql_real_data_home) == 1))) { if (global_system_variables.log_warnings) sql_print_warning("lower_case_table_names was set to 2, even though your " "the file system '%s' is case sensitive. Now setting " "lower_case_table_names to 0 to avoid future problems.", mysql_real_data_home); lower_case_table_names= 0; } /* Reset table_alias_charset, now that lower_case_table_names is set. */ table_alias_charset= (lower_case_table_names ? files_charset_info : &my_charset_bin); return 0; } static int init_thread_environment() { (void) pthread_mutex_init(&LOCK_mysql_create_db,MY_MUTEX_INIT_SLOW); (void) pthread_mutex_init(&LOCK_Acl,MY_MUTEX_INIT_SLOW); (void) pthread_mutex_init(&LOCK_open, NULL); (void) pthread_mutex_init(&LOCK_thread_count,MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_mapped_file,MY_MUTEX_INIT_SLOW); (void) pthread_mutex_init(&LOCK_status,MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_error_log,MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_delayed_insert,MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_delayed_status,MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_delayed_create,MY_MUTEX_INIT_SLOW); (void) pthread_mutex_init(&LOCK_manager,MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_crypt,MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_bytes_sent,MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_bytes_received,MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_user_conn, MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_active_mi, MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_global_system_variables, MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_global_read_lock, MY_MUTEX_INIT_FAST); (void) pthread_mutex_init(&LOCK_uuid_generator, MY_MUTEX_INIT_FAST); #ifdef HAVE_OPENSSL (void) pthread_mutex_init(&LOCK_des_key_file,MY_MUTEX_INIT_FAST); #ifndef HAVE_YASSL openssl_stdlocks= (openssl_lock_t*) OPENSSL_malloc(CRYPTO_num_locks() * sizeof(openssl_lock_t)); for (int i= 0; i < CRYPTO_num_locks(); ++i) (void) my_rwlock_init(&openssl_stdlocks[i].lock, NULL); CRYPTO_set_dynlock_create_callback(openssl_dynlock_create); CRYPTO_set_dynlock_destroy_callback(openssl_dynlock_destroy); CRYPTO_set_dynlock_lock_callback(openssl_lock); CRYPTO_set_locking_callback(openssl_lock_function); CRYPTO_set_id_callback(openssl_id_function); #endif #endif (void) my_rwlock_init(&LOCK_sys_init_connect, NULL); (void) my_rwlock_init(&LOCK_sys_init_slave, NULL); (void) my_rwlock_init(&LOCK_grant, NULL); (void) pthread_cond_init(&COND_thread_count,NULL); (void) pthread_cond_init(&COND_refresh,NULL); (void) pthread_cond_init(&COND_thread_cache,NULL); (void) pthread_cond_init(&COND_flush_thread_cache,NULL); (void) pthread_cond_init(&COND_manager,NULL); #ifdef HAVE_REPLICATION (void) pthread_mutex_init(&LOCK_rpl_status, MY_MUTEX_INIT_FAST); (void) pthread_cond_init(&COND_rpl_status, NULL); #endif (void) pthread_mutex_init(&LOCK_server_started, MY_MUTEX_INIT_FAST); (void) pthread_cond_init(&COND_server_started,NULL); sp_cache_init(); /* Parameter for threads created for connections */ (void) pthread_attr_init(&connection_attrib); (void) pthread_attr_setdetachstate(&connection_attrib, PTHREAD_CREATE_DETACHED); pthread_attr_setscope(&connection_attrib, PTHREAD_SCOPE_SYSTEM); if (!(opt_specialflag & SPECIAL_NO_PRIOR)) my_pthread_attr_setprio(&connection_attrib,WAIT_PRIOR); if (pthread_key_create(&THR_THD,NULL) || pthread_key_create(&THR_MALLOC,NULL)) { sql_print_error("Can't create thread-keys"); return 1; } return 0; } #if defined(HAVE_OPENSSL) && !defined(HAVE_YASSL) static unsigned long openssl_id_function() { return (unsigned long) pthread_self(); } static openssl_lock_t *openssl_dynlock_create(const char *file, int line) { openssl_lock_t *lock= new openssl_lock_t; my_rwlock_init(&lock->lock, NULL); return lock; } static void openssl_dynlock_destroy(openssl_lock_t *lock, const char *file, int line) { rwlock_destroy(&lock->lock); delete lock; } static void openssl_lock_function(int mode, int n, const char *file, int line) { if (n < 0 || n > CRYPTO_num_locks()) { /* Lock number out of bounds. */ sql_print_error("Fatal: OpenSSL interface problem (n = %d)", n); abort(); } openssl_lock(mode, &openssl_stdlocks[n], file, line); } static void openssl_lock(int mode, openssl_lock_t *lock, const char *file, int line) { int err; char const *what; switch (mode) { case CRYPTO_LOCK|CRYPTO_READ: what = "read lock"; err = rw_rdlock(&lock->lock); break; case CRYPTO_LOCK|CRYPTO_WRITE: what = "write lock"; err = rw_wrlock(&lock->lock); break; case CRYPTO_UNLOCK|CRYPTO_READ: case CRYPTO_UNLOCK|CRYPTO_WRITE: what = "unlock"; err = rw_unlock(&lock->lock); break; default: /* Unknown locking mode. */ sql_print_error("Fatal: OpenSSL interface problem (mode=0x%x)", mode); abort(); } if (err) { sql_print_error("Fatal: can't %s OpenSSL %s lock", what); abort(); } } #endif /* HAVE_OPENSSL */ static void init_ssl() { #ifdef HAVE_OPENSSL if (opt_use_ssl) { /* having ssl_acceptor_fd != 0 signals the use of SSL */ ssl_acceptor_fd= new_VioSSLAcceptorFd(opt_ssl_key, opt_ssl_cert, opt_ssl_ca, opt_ssl_capath, opt_ssl_cipher); DBUG_PRINT("info",("ssl_acceptor_fd: 0x%lx", (long) ssl_acceptor_fd)); if (!ssl_acceptor_fd) { opt_use_ssl = 0; have_openssl= SHOW_OPTION_DISABLED; } } else { have_openssl= SHOW_OPTION_DISABLED; } if (des_key_file) load_des_key_file(des_key_file); #endif /* HAVE_OPENSSL */ } static int init_server_components() { DBUG_ENTER("init_server_components"); /* We need to call each of these following functions to ensure that all things are initialized so that unireg_abort() doesn't fail */ if (table_cache_init() | table_def_init() | hostname_cache_init()) unireg_abort(1); query_cache_result_size_limit(query_cache_limit); query_cache_set_min_res_unit(query_cache_min_res_unit); query_cache_init(); query_cache_resize(query_cache_size); randominit(&sql_rand,(ulong) start_time,(ulong) start_time/2); reset_floating_point_exceptions(); init_thr_lock(); #ifdef HAVE_REPLICATION init_slave_list(); #endif /* Setup log files */ if (opt_log) mysql_log.open_query_log(opt_logname); if (opt_update_log) { /* Update log is removed since 5.0. But we still accept the option. The idea is if the user already uses the binlog and the update log, we completely ignore any option/variable related to the update log, like if the update log did not exist. But if the user uses only the update log, then we translate everything into binlog for him (with warnings). Implementation of the above : - If mysqld is started with --log-update and --log-bin, ignore --log-update (print a warning), push a warning when SQL_LOG_UPDATE is used, and turn off --sql-bin-update-same. This will completely ignore SQL_LOG_UPDATE - If mysqld is started with --log-update only, change it to --log-bin (with the filename passed to log-update, plus '-bin') (print a warning), push a warning when SQL_LOG_UPDATE is used, and turn on --sql-bin-update-same. This will translate SQL_LOG_UPDATE to SQL_LOG_BIN. Note that we tell the user that --sql-bin-update-same is deprecated and does nothing, and we don't take into account if he used this option or not; but internally we give this variable a value to have the behaviour we want (i.e. have SQL_LOG_UPDATE influence SQL_LOG_BIN or not). As sql-bin-update-same, log-update and log-bin cannot be changed by the user after starting the server (they are not variables), the user will not later interfere with the settings we do here. */ if (opt_bin_log) { opt_sql_bin_update= 0; sql_print_error("The update log is no longer supported by MySQL in \ version 5.0 and above. It is replaced by the binary log."); } else { opt_sql_bin_update= 1; opt_bin_log= 1; if (opt_update_logname) { /* as opt_bin_log==0, no need to free opt_bin_logname */ if (!(opt_bin_logname= my_strdup(opt_update_logname, MYF(MY_WME)))) exit(EXIT_OUT_OF_MEMORY); sql_print_error("The update log is no longer supported by MySQL in \ version 5.0 and above. It is replaced by the binary log. Now starting MySQL \ with --log-bin='%s' instead.",opt_bin_logname); } else sql_print_error("The update log is no longer supported by MySQL in \ version 5.0 and above. It is replaced by the binary log. Now starting MySQL \ with --log-bin instead."); } } if (opt_log_slave_updates && !opt_bin_log) { sql_print_warning("You need to use --log-bin to make " "--log-slave-updates work."); unireg_abort(1); } if (opt_slow_log) mysql_slow_log.open_slow_log(opt_slow_logname); #ifdef HAVE_REPLICATION if (opt_log_slave_updates && replicate_same_server_id) { sql_print_error("\ using --replicate-same-server-id in conjunction with \ --log-slave-updates is impossible, it would lead to infinite loops in this \ server."); unireg_abort(1); } #endif if (opt_error_log) { if (!log_error_file_ptr[0]) fn_format(log_error_file, glob_hostname, mysql_data_home, ".err", MY_REPLACE_EXT); /* replace '.' by '.err', bug#4997 */ else fn_format(log_error_file, log_error_file_ptr, mysql_data_home, ".err", MY_UNPACK_FILENAME | MY_SAFE_PATH); if (!log_error_file[0]) opt_error_log= 1; // Too long file name else { #ifndef EMBEDDED_LIBRARY if (freopen(log_error_file, "a+", stdout)) #endif stderror_file= freopen(log_error_file, "a+", stderr); } } if (opt_bin_log) { char buf[FN_REFLEN]; const char *ln; ln= mysql_bin_log.generate_name(opt_bin_logname, "-bin", 1, buf); if (!opt_bin_logname && !opt_binlog_index_name) { /* User didn't give us info to name the binlog index file. Picking `hostname`-bin.index like did in 4.x, causes replication to fail if the hostname is changed later. So, we would like to instead require a name. But as we don't want to break many existing setups, we only give warning, not error. */ sql_print_warning("No argument was provided to --log-bin, and " "--log-bin-index was not used; so replication " "may break when this MySQL server acts as a " "master and has his hostname changed!! Please " "use '--log-bin=%s' to avoid this problem.", ln); } if (ln == buf) { my_free(opt_bin_logname, MYF(MY_ALLOW_ZERO_PTR)); opt_bin_logname=my_strdup(buf, MYF(0)); } if (mysql_bin_log.open_index_file(opt_binlog_index_name, ln)) { unireg_abort(1); } /* Used to specify which type of lock we need to use for queries of type INSERT ... SELECT. This will change when we have row level logging. */ using_update_log=1; } if (xid_cache_init()) { sql_print_error("Out of memory"); unireg_abort(1); } if (ha_init()) { sql_print_error("Can't init databases"); unireg_abort(1); } /* Check that the default storage engine is actually available. */ if (!ha_storage_engine_is_enabled((enum db_type) global_system_variables.table_type)) { if (!opt_bootstrap) { sql_print_error("Default storage engine (%s) is not available", ha_get_storage_engine((enum db_type) global_system_variables.table_type)); unireg_abort(1); } global_system_variables.table_type= DB_TYPE_MYISAM; } tc_log= (total_ha_2pc > 1 ? (opt_bin_log ? (TC_LOG *) &mysql_bin_log : (TC_LOG *) &tc_log_mmap) : (TC_LOG *) &tc_log_dummy); if (tc_log->open(opt_bin_logname)) { sql_print_error("Can't init tc log"); unireg_abort(1); } if (ha_recover(0)) { unireg_abort(1); } if (opt_bin_log && mysql_bin_log.open(opt_bin_logname, LOG_BIN, 0, WRITE_CACHE, 0, max_binlog_size, 0)) unireg_abort(1); #ifdef HAVE_REPLICATION if (opt_bin_log && expire_logs_days) { long purge_time= time(0) - expire_logs_days*24*60*60; if (purge_time >= 0) mysql_bin_log.purge_logs_before_date(purge_time); } #endif if (opt_myisam_log) (void) mi_log(1); /* call ha_init_key_cache() on all key caches to init them */ process_key_caches(&ha_init_key_cache); #if defined(HAVE_MLOCKALL) && defined(MCL_CURRENT) && !defined(EMBEDDED_LIBRARY) if (locked_in_memory && !getuid()) { if (setreuid((uid_t)-1, 0) == -1) { // this should never happen sql_perror("setreuid"); unireg_abort(1); } if (mlockall(MCL_CURRENT)) { if (global_system_variables.log_warnings) sql_print_warning("Failed to lock memory. Errno: %d\n",errno); locked_in_memory= 0; } if (user_info) set_user(mysqld_user, user_info); } else #endif locked_in_memory=0; ft_init_stopwords(); init_max_user_conn(); init_update_queries(); DBUG_RETURN(0); } static void create_maintenance_thread() { if ( #ifdef WITH_BERKELEY_STORAGE_ENGINE (have_berkeley_db == SHOW_OPTION_YES) || #endif (flush_time && flush_time != ~(ulong) 0L)) { pthread_t hThread; if (pthread_create(&hThread,&connection_attrib,handle_manager,0)) sql_print_warning("Can't create thread to manage maintenance"); } } static void create_shutdown_thread() { #if !defined(EMBEDDED_LIBRARY) #ifdef __WIN__ hEventShutdown=CreateEvent(0, FALSE, FALSE, shutdown_event_name); pthread_t hThread; if (pthread_create(&hThread,&connection_attrib,handle_shutdown,0)) sql_print_warning("Can't create thread to handle shutdown requests"); // On "Stop Service" we have to do regular shutdown Service.SetShutdownEvent(hEventShutdown); #endif #ifdef OS2 pthread_cond_init(&eventShutdown, NULL); pthread_t hThread; if (pthread_create(&hThread,&connection_attrib,handle_shutdown,0)) sql_print_warning("Can't create thread to handle shutdown requests"); #endif #endif // EMBEDDED_LIBRARY } #if defined(__NT__) || defined(HAVE_SMEM) static void handle_connections_methods() { pthread_t hThread; DBUG_ENTER("handle_connections_methods"); #ifdef __NT__ if (hPipe == INVALID_HANDLE_VALUE && (!have_tcpip || opt_disable_networking) && !opt_enable_shared_memory) { sql_print_error("TCP/IP, --shared-memory, or --named-pipe should be configured on NT OS"); unireg_abort(1); // Will not return } #endif pthread_mutex_lock(&LOCK_thread_count); (void) pthread_cond_init(&COND_handler_count,NULL); handler_count=0; #ifdef __NT__ if (hPipe != INVALID_HANDLE_VALUE) { handler_count++; if (pthread_create(&hThread,&connection_attrib, handle_connections_namedpipes, 0)) { sql_print_warning("Can't create thread to handle named pipes"); handler_count--; } } #endif /* __NT__ */ if (have_tcpip && !opt_disable_networking) { handler_count++; if (pthread_create(&hThread,&connection_attrib, handle_connections_sockets, 0)) { sql_print_warning("Can't create thread to handle TCP/IP"); handler_count--; } } #ifdef HAVE_SMEM if (opt_enable_shared_memory) { handler_count++; if (pthread_create(&hThread,&connection_attrib, handle_connections_shared_memory, 0)) { sql_print_warning("Can't create thread to handle shared memory"); handler_count--; } } #endif while (handler_count > 0) pthread_cond_wait(&COND_handler_count,&LOCK_thread_count); pthread_mutex_unlock(&LOCK_thread_count); DBUG_VOID_RETURN; } void decrement_handler_count() { pthread_mutex_lock(&LOCK_thread_count); handler_count--; pthread_mutex_unlock(&LOCK_thread_count); pthread_cond_signal(&COND_handler_count); } #else #define decrement_handler_count() #endif /* defined(__NT__) || defined(HAVE_SMEM) */ #ifndef EMBEDDED_LIBRARY #ifdef __WIN__ int win_main(int argc, char **argv) #else int main(int argc, char **argv) #endif { DEBUGGER_OFF; rpl_filter= new Rpl_filter; binlog_filter= new Rpl_filter; if (!rpl_filter || !binlog_filter) { sql_perror("Could not allocate replication and binlog filters"); exit(1); } MY_INIT(argv[0]); // init my_sys library & pthreads #ifdef _CUSTOMSTARTUPCONFIG_ if (_cust_check_startup()) { / * _cust_check_startup will report startup failure error * / exit(1); } #endif #ifdef __WIN__ /* Before performing any socket operation (like retrieving hostname in init_common_variables we have to call WSAStartup */ { WSADATA WsaData; if (SOCKET_ERROR == WSAStartup (0x0101, &WsaData)) { /* errors are not read yet, so we use english text here */ my_message(ER_WSAS_FAILED, "WSAStartup Failed", MYF(0)); unireg_abort(1); } } #endif /* __WIN__ */ if (init_common_variables(MYSQL_CONFIG_NAME, argc, argv, load_default_groups)) unireg_abort(1); // Will do exit init_signals(); if (!(opt_specialflag & SPECIAL_NO_PRIOR)) my_pthread_setprio(pthread_self(),CONNECT_PRIOR); #if defined(__ia64__) || defined(__ia64) /* Peculiar things with ia64 platforms - it seems we only have half the stack size in reality, so we have to double it here */ pthread_attr_setstacksize(&connection_attrib,thread_stack*2); #else pthread_attr_setstacksize(&connection_attrib,thread_stack); #endif #ifdef HAVE_PTHREAD_ATTR_GETSTACKSIZE { /* Retrieve used stack size; Needed for checking stack overflows */ size_t stack_size= 0; pthread_attr_getstacksize(&connection_attrib, &stack_size); #if defined(__ia64__) || defined(__ia64) stack_size/= 2; #endif /* We must check if stack_size = 0 as Solaris 2.9 can return 0 here */ if (stack_size && stack_size < thread_stack) { if (global_system_variables.log_warnings) sql_print_warning("Asked for %ld thread stack, but got %ld", thread_stack, stack_size); #if defined(__ia64__) || defined(__ia64) thread_stack= stack_size*2; #else thread_stack= stack_size; #endif } } #endif (void) thr_setconcurrency(concurrency); // 10 by default select_thread=pthread_self(); select_thread_in_use=1; init_ssl(); #ifdef HAVE_LIBWRAP libwrapName= my_progname+dirname_length(my_progname); openlog(libwrapName, LOG_PID, LOG_AUTH); #endif /* We have enough space for fiddling with the argv, continue */ check_data_home(mysql_real_data_home); if (my_setwd(mysql_real_data_home,MYF(MY_WME))) unireg_abort(1); /* purecov: inspected */ mysql_data_home= mysql_data_home_buff; mysql_data_home[0]=FN_CURLIB; // all paths are relative from here mysql_data_home[1]=0; if ((user_info= check_user(mysqld_user))) { #if defined(HAVE_MLOCKALL) && defined(MCL_CURRENT) if (locked_in_memory) // getuid() == 0 here set_effective_user(user_info); else #endif set_user(mysqld_user, user_info); } if (opt_bin_log && !server_id) { server_id= !master_host ? 1 : 2; #ifdef EXTRA_DEBUG switch (server_id) { case 1: sql_print_warning("\ You have enabled the binary log, but you haven't set server-id to \ a non-zero value: we force server id to 1; updates will be logged to the \ binary log, but connections from slaves will not be accepted."); break; case 2: sql_print_warning("\ You should set server-id to a non-0 value if master_host is set; \ we force server id to 2, but this MySQL server will not act as a slave."); break; } #endif } if (init_server_components()) unireg_abort(1); network_init(); #ifdef __WIN__ if (!opt_console) { freopen(log_error_file,"a+",stdout); freopen(log_error_file,"a+",stderr); FreeConsole(); // Remove window } #endif /* Initialize my_str_malloc() and my_str_free() */ my_str_malloc= &my_str_malloc_mysqld; my_str_free= &my_str_free_mysqld; /* init signals & alarm After this we can't quit by a simple unireg_abort */ error_handler_hook= my_message_sql; start_signal_handler(); // Creates pidfile if (acl_init(opt_noacl) || my_tz_init((THD *)0, default_tz_name, opt_bootstrap)) { abort_loop=1; select_thread_in_use=0; #ifndef __NETWARE__ (void) pthread_kill(signal_thread, MYSQL_KILL_SIGNAL); #endif /* __NETWARE__ */ if (!opt_bootstrap) (void) my_delete(pidfile_name,MYF(MY_WME)); // Not needed anymore if (unix_sock != INVALID_SOCKET) unlink(mysqld_unix_port); exit(1); } if (!opt_noacl) (void) grant_init(); if (!opt_noacl) { plugin_init(); #ifdef HAVE_DLOPEN udf_init(); #endif } if (opt_bootstrap) /* If running with bootstrap, do not start replication. */ opt_skip_slave_start= 1; /* init_slave() must be called after the thread keys are created. Some parts of the code (e.g. SHOW STATUS LIKE 'slave_running' and other places) assume that active_mi != 0, so let's fail if it's 0 (out of memory); a message has already been printed. */ if (init_slave() && !active_mi) { end_thr_alarm(1); // Don't allow alarms unireg_abort(1); } if (opt_bootstrap) { select_thread_in_use= 0; // Allow 'kill' to work bootstrap(stdin); end_thr_alarm(1); // Don't allow alarms unireg_abort(bootstrap_error ? 1 : 0); } if (opt_init_file) { if (read_init_file(opt_init_file)) { end_thr_alarm(1); // Don't allow alarms unireg_abort(1); } } create_shutdown_thread(); create_maintenance_thread(); sql_print_information(ER(ER_STARTUP),my_progname,server_version, ((unix_sock == INVALID_SOCKET) ? (char*) "" : mysqld_unix_port), mysqld_port, MYSQL_COMPILATION_COMMENT); // Signal threads waiting for server to be started mysqld_server_started= 1; pthread_cond_signal(&COND_server_started); #if defined(__NT__) || defined(HAVE_SMEM) handle_connections_methods(); #else #ifdef __WIN__ if (!have_tcpip || opt_disable_networking) { sql_print_error("TCP/IP unavailable or disabled with --skip-networking; no available interfaces"); unireg_abort(1); } #endif handle_connections_sockets(0); #endif /* __NT__ */ /* (void) pthread_attr_destroy(&connection_attrib); */ DBUG_PRINT("quit",("Exiting main thread")); #ifndef __WIN__ #ifdef EXTRA_DEBUG2 sql_print_error("Before Lock_thread_count"); #endif (void) pthread_mutex_lock(&LOCK_thread_count); DBUG_PRINT("quit", ("Got thread_count mutex")); select_thread_in_use=0; // For close_connections (void) pthread_mutex_unlock(&LOCK_thread_count); (void) pthread_cond_broadcast(&COND_thread_count); #ifdef EXTRA_DEBUG2 sql_print_error("After lock_thread_count"); #endif #endif /* __WIN__ */ /* Wait until cleanup is done */ (void) pthread_mutex_lock(&LOCK_thread_count); while (!ready_to_exit) pthread_cond_wait(&COND_thread_count,&LOCK_thread_count); (void) pthread_mutex_unlock(&LOCK_thread_count); #if defined(__WIN__) && !defined(EMBEDDED_LIBRARY) if (Service.IsNT() && start_mode) Service.Stop(); else { Service.SetShutdownEvent(0); if (hEventShutdown) CloseHandle(hEventShutdown); } #endif clean_up(1); wait_for_signal_thread_to_end(); clean_up_mutexes(); my_end(opt_endinfo ? MY_CHECK_ERROR | MY_GIVE_INFO : 0); exit(0); return(0); /* purecov: deadcode */ } #endif /* EMBEDDED_LIBRARY */ /**************************************************************************** Main and thread entry function for Win32 (all this is needed only to run mysqld as a service on WinNT) ****************************************************************************/ #if defined(__WIN__) && !defined(EMBEDDED_LIBRARY) int mysql_service(void *p) { if (use_opt_args) win_main(opt_argc, opt_argv); else win_main(Service.my_argc, Service.my_argv); return 0; } /* Quote string if it contains space, else copy */ static char *add_quoted_string(char *to, const char *from, char *to_end) { uint length= (uint) (to_end-to); if (!strchr(from, ' ')) return strmake(to, from, length-1); return strxnmov(to, length-1, "\"", from, "\"", NullS); } /* Handle basic handling of services, like installation and removal SYNOPSIS default_service_handling() argv Pointer to argument list servicename Internal name of service displayname Display name of service (in taskbar ?) file_path Path to this program startup_option Startup option to mysqld RETURN VALUES 0 option handled 1 Could not handle option */ static bool default_service_handling(char **argv, const char *servicename, const char *displayname, const char *file_path, const char *extra_opt, const char *account_name) { char path_and_service[FN_REFLEN+FN_REFLEN+32], *pos, *end; end= path_and_service + sizeof(path_and_service)-3; /* We have to quote filename if it contains spaces */ pos= add_quoted_string(path_and_service, file_path, end); if (*extra_opt) { /* Add (possible quoted) option after file_path */ *pos++= ' '; pos= add_quoted_string(pos, extra_opt, end); } /* We must have servicename last */ *pos++= ' '; (void) add_quoted_string(pos, servicename, end); if (Service.got_service_option(argv, "install")) { Service.Install(1, servicename, displayname, path_and_service, account_name); return 0; } if (Service.got_service_option(argv, "install-manual")) { Service.Install(0, servicename, displayname, path_and_service, account_name); return 0; } if (Service.got_service_option(argv, "remove")) { Service.Remove(servicename); return 0; } return 1; } int main(int argc, char **argv) { /* When several instances are running on the same machine, we need to have an unique named hEventShudown through the application PID e.g.: MySQLShutdown1890; MySQLShutdown2342 */ int10_to_str((int) GetCurrentProcessId(),strmov(shutdown_event_name, "MySQLShutdown"), 10); /* Must be initialized early for comparison of service name */ system_charset_info= &my_charset_utf8_general_ci; if (Service.GetOS()) /* true NT family */ { char file_path[FN_REFLEN]; my_path(file_path, argv[0], ""); /* Find name in path */ fn_format(file_path,argv[0],file_path,"", MY_REPLACE_DIR | MY_UNPACK_FILENAME | MY_RESOLVE_SYMLINKS); if (argc == 2) { if (!default_service_handling(argv, MYSQL_SERVICENAME, MYSQL_SERVICENAME, file_path, "", NULL)) return 0; if (Service.IsService(argv[1])) /* Start an optional service */ { /* Only add the service name to the groups read from the config file if it's not "MySQL". (The default service name should be 'mysqld' but we started a bad tradition by calling it MySQL from the start and we are now stuck with it. */ if (my_strcasecmp(system_charset_info, argv[1],"mysql")) load_default_groups[load_default_groups_sz-2]= argv[1]; start_mode= 1; Service.Init(argv[1], mysql_service); return 0; } } else if (argc == 3) /* install or remove any optional service */ { if (!default_service_handling(argv, argv[2], argv[2], file_path, "", NULL)) return 0; if (Service.IsService(argv[2])) { /* mysqld was started as mysqld --defaults-file=my_path\my.ini service-name */ use_opt_args=1; opt_argc= 2; // Skip service-name opt_argv=argv; start_mode= 1; if (my_strcasecmp(system_charset_info, argv[2],"mysql")) load_default_groups[load_default_groups_sz-2]= argv[2]; Service.Init(argv[2], mysql_service); return 0; } } else if (argc == 4 || argc == 5) { /* This may seem strange, because we handle --local-service while preserving 4.1's behavior of allowing any one other argument that is passed to the service on startup. (The assumption is that this is --defaults-file=file, but that was not enforced in 4.1, so we don't enforce it here.) */ const char *extra_opt= NullS; const char *account_name = NullS; int index; for (index = 3; index < argc; index++) { if (!strcmp(argv[index], "--local-service")) account_name= "NT AUTHORITY\\LocalService"; else extra_opt= argv[index]; } if (argc == 4 || account_name) if (!default_service_handling(argv, argv[2], argv[2], file_path, extra_opt, account_name)) return 0; } else if (argc == 1 && Service.IsService(MYSQL_SERVICENAME)) { /* start the default service */ start_mode= 1; Service.Init(MYSQL_SERVICENAME, mysql_service); return 0; } } /* Start as standalone server */ Service.my_argc=argc; Service.my_argv=argv; mysql_service(NULL); return 0; } #endif /* Execute all commands from a file. Used by the mysql_install_db script to create MySQL privilege tables without having to start a full MySQL server. */ static void bootstrap(FILE *file) { DBUG_ENTER("bootstrap"); THD *thd= new THD; thd->bootstrap=1; my_net_init(&thd->net,(st_vio*) 0); thd->max_client_packet_length= thd->net.max_packet; thd->security_ctx->master_access= ~(ulong)0; thd->thread_id=thread_id++; thread_count++; bootstrap_file=file; #ifndef EMBEDDED_LIBRARY // TODO: Enable this if (pthread_create(&thd->real_id,&connection_attrib,handle_bootstrap, (void*) thd)) { sql_print_warning("Can't create thread to handle bootstrap"); bootstrap_error=-1; DBUG_VOID_RETURN; } /* Wait for thread to die */ (void) pthread_mutex_lock(&LOCK_thread_count); while (thread_count) { (void) pthread_cond_wait(&COND_thread_count,&LOCK_thread_count); DBUG_PRINT("quit",("One thread died (count=%u)",thread_count)); } (void) pthread_mutex_unlock(&LOCK_thread_count); #else thd->mysql= 0; handle_bootstrap((void *)thd); #endif DBUG_VOID_RETURN; } static bool read_init_file(char *file_name) { FILE *file; DBUG_ENTER("read_init_file"); DBUG_PRINT("enter",("name: %s",file_name)); if (!(file=my_fopen(file_name,O_RDONLY,MYF(MY_WME)))) return(1); bootstrap(file); (void) my_fclose(file,MYF(MY_WME)); return 0; } #ifndef EMBEDDED_LIBRARY static void create_new_thread(THD *thd) { DBUG_ENTER("create_new_thread"); NET *net=&thd->net; // For easy ref net->read_timeout = (uint) connect_timeout; if (protocol_version > 9) net->return_errno=1; /* don't allow too many connections */ if (thread_count - delayed_insert_threads >= max_connections+1 || abort_loop) { DBUG_PRINT("error",("Too many connections")); close_connection(thd, ER_CON_COUNT_ERROR, 1); delete thd; DBUG_VOID_RETURN; } pthread_mutex_lock(&LOCK_thread_count); thd->thread_id=thread_id++; thd->real_id=pthread_self(); // Keep purify happy /* Start a new thread to handle connection */ #ifdef ONE_THREAD if (test_flags & TEST_NO_THREADS) // For debugging under Linux { thread_cache_size=0; // Safety thread_count++; threads.append(thd); thd->real_id=pthread_self(); (void) pthread_mutex_unlock(&LOCK_thread_count); handle_one_connection((void*) thd); } else #endif { if (cached_thread_count > wake_thread) { start_cached_thread(thd); } else { int error; thread_count++; thread_created++; threads.append(thd); if (thread_count-delayed_insert_threads > max_used_connections) max_used_connections=thread_count-delayed_insert_threads; DBUG_PRINT("info",(("creating thread %d"), thd->thread_id)); thd->connect_time = time(NULL); if ((error=pthread_create(&thd->real_id,&connection_attrib, handle_one_connection, (void*) thd))) { DBUG_PRINT("error", ("Can't create thread to handle request (error %d)", error)); thread_count--; thd->killed= THD::KILL_CONNECTION; // Safety (void) pthread_mutex_unlock(&LOCK_thread_count); statistic_increment(aborted_connects,&LOCK_status); net_printf_error(thd, ER_CANT_CREATE_THREAD, error); (void) pthread_mutex_lock(&LOCK_thread_count); close_connection(thd,0,0); delete thd; (void) pthread_mutex_unlock(&LOCK_thread_count); DBUG_VOID_RETURN; } } (void) pthread_mutex_unlock(&LOCK_thread_count); } DBUG_PRINT("info",("Thread created")); DBUG_VOID_RETURN; } #endif /* EMBEDDED_LIBRARY */ #ifdef SIGNALS_DONT_BREAK_READ inline void kill_broken_server() { /* hack to get around signals ignored in syscalls for problem OS's */ if ( #if !defined(__NETWARE__) unix_sock == INVALID_SOCKET || #endif (!opt_disable_networking && ip_sock == INVALID_SOCKET)) { select_thread_in_use = 0; /* The following call will never return */ kill_server(IF_NETWARE(MYSQL_KILL_SIGNAL, (void*) MYSQL_KILL_SIGNAL)); } } #define MAYBE_BROKEN_SYSCALL kill_broken_server(); #else #define MAYBE_BROKEN_SYSCALL #endif /* Handle new connections and spawn new process to handle them */ #ifndef EMBEDDED_LIBRARY pthread_handler_t handle_connections_sockets(void *arg __attribute__((unused))) { my_socket sock,new_sock; uint error_count=0; uint max_used_connection= (uint) (max(ip_sock,unix_sock)+1); fd_set readFDs,clientFDs; THD *thd; struct sockaddr_in cAddr; int ip_flags=0,socket_flags=0,flags; st_vio *vio_tmp; DBUG_ENTER("handle_connections_sockets"); LINT_INIT(new_sock); (void) my_pthread_getprio(pthread_self()); // For debugging FD_ZERO(&clientFDs); if (ip_sock != INVALID_SOCKET) { FD_SET(ip_sock,&clientFDs); #ifdef HAVE_FCNTL ip_flags = fcntl(ip_sock, F_GETFL, 0); #endif } #ifdef HAVE_SYS_UN_H FD_SET(unix_sock,&clientFDs); #ifdef HAVE_FCNTL socket_flags=fcntl(unix_sock, F_GETFL, 0); #endif #endif DBUG_PRINT("general",("Waiting for connections.")); MAYBE_BROKEN_SYSCALL; while (!abort_loop) { readFDs=clientFDs; #ifdef HPUX10 if (select(max_used_connection,(int*) &readFDs,0,0,0) < 0) continue; #else if (select((int) max_used_connection,&readFDs,0,0,0) < 0) { if (socket_errno != SOCKET_EINTR) { if (!select_errors++ && !abort_loop) /* purecov: inspected */ sql_print_error("mysqld: Got error %d from select",socket_errno); /* purecov: inspected */ } MAYBE_BROKEN_SYSCALL continue; } #endif /* HPUX10 */ if (abort_loop) { MAYBE_BROKEN_SYSCALL; break; } /* Is this a new connection request ? */ #ifdef HAVE_SYS_UN_H if (FD_ISSET(unix_sock,&readFDs)) { sock = unix_sock; flags= socket_flags; } else #endif { sock = ip_sock; flags= ip_flags; } #if !defined(NO_FCNTL_NONBLOCK) if (!(test_flags & TEST_BLOCKING)) { #if defined(O_NONBLOCK) fcntl(sock, F_SETFL, flags | O_NONBLOCK); #elif defined(O_NDELAY) fcntl(sock, F_SETFL, flags | O_NDELAY); #endif } #endif /* NO_FCNTL_NONBLOCK */ for (uint retry=0; retry < MAX_ACCEPT_RETRY; retry++) { size_socket length=sizeof(struct sockaddr_in); new_sock = accept(sock, my_reinterpret_cast(struct sockaddr *) (&cAddr), &length); #ifdef __NETWARE__ // TODO: temporary fix, waiting for TCP/IP fix - DEFECT000303149 if ((new_sock == INVALID_SOCKET) && (socket_errno == EINVAL)) { kill_server(SIGTERM); } #endif if (new_sock != INVALID_SOCKET || (socket_errno != SOCKET_EINTR && socket_errno != SOCKET_EAGAIN)) break; MAYBE_BROKEN_SYSCALL; #if !defined(NO_FCNTL_NONBLOCK) if (!(test_flags & TEST_BLOCKING)) { if (retry == MAX_ACCEPT_RETRY - 1) fcntl(sock, F_SETFL, flags); // Try without O_NONBLOCK } #endif } #if !defined(NO_FCNTL_NONBLOCK) if (!(test_flags & TEST_BLOCKING)) fcntl(sock, F_SETFL, flags); #endif if (new_sock == INVALID_SOCKET) { if ((error_count++ & 255) == 0) // This can happen often sql_perror("Error in accept"); MAYBE_BROKEN_SYSCALL; if (socket_errno == SOCKET_ENFILE || socket_errno == SOCKET_EMFILE) sleep(1); // Give other threads some time continue; } #ifdef HAVE_LIBWRAP { if (sock == ip_sock) { struct request_info req; signal(SIGCHLD, SIG_DFL); request_init(&req, RQ_DAEMON, libwrapName, RQ_FILE, new_sock, NULL); fromhost(&req); if (!hosts_access(&req)) { /* This may be stupid but refuse() includes an exit(0) which we surely don't want... clean_exit() - same stupid thing ... */ syslog(deny_severity, "refused connect from %s", eval_client(&req)); /* C++ sucks (the gibberish in front just translates the supplied sink function pointer in the req structure from a void (*sink)(); to a void(*sink)(int) if you omit the cast, the C++ compiler will cry... */ if (req.sink) ((void (*)(int))req.sink)(req.fd); (void) shutdown(new_sock,2); (void) closesocket(new_sock); continue; } } } #endif /* HAVE_LIBWRAP */ { size_socket dummyLen; struct sockaddr dummy; dummyLen = sizeof(struct sockaddr); if (getsockname(new_sock,&dummy, &dummyLen) < 0) { sql_perror("Error on new connection socket"); (void) shutdown(new_sock,2); (void) closesocket(new_sock); continue; } } /* ** Don't allow too many connections */ if (!(thd= new THD)) { (void) shutdown(new_sock,2); VOID(closesocket(new_sock)); continue; } if (!(vio_tmp=vio_new(new_sock, sock == unix_sock ? VIO_TYPE_SOCKET : VIO_TYPE_TCPIP, sock == unix_sock ? VIO_LOCALHOST: 0)) || my_net_init(&thd->net,vio_tmp)) { if (vio_tmp) vio_delete(vio_tmp); else { (void) shutdown(new_sock,2); (void) closesocket(new_sock); } delete thd; continue; } if (sock == unix_sock) thd->security_ctx->host=(char*) my_localhost; #ifdef __WIN__ /* Set default wait_timeout */ ulong wait_timeout= global_system_variables.net_wait_timeout * 1000; (void) setsockopt(new_sock, SOL_SOCKET, SO_RCVTIMEO, (char*)&wait_timeout, sizeof(wait_timeout)); #endif create_new_thread(thd); } #ifdef OS2 // kill server must be invoked from thread 1! kill_server(MYSQL_KILL_SIGNAL); #endif decrement_handler_count(); DBUG_RETURN(0); } #ifdef __NT__ pthread_handler_t handle_connections_namedpipes(void *arg) { HANDLE hConnectedPipe; BOOL fConnected; THD *thd; my_thread_init(); DBUG_ENTER("handle_connections_namedpipes"); (void) my_pthread_getprio(pthread_self()); // For debugging DBUG_PRINT("general",("Waiting for named pipe connections.")); while (!abort_loop) { /* wait for named pipe connection */ fConnected = ConnectNamedPipe(hPipe, NULL); if (abort_loop) break; if (!fConnected) fConnected = GetLastError() == ERROR_PIPE_CONNECTED; if (!fConnected) { CloseHandle(hPipe); if ((hPipe= CreateNamedPipe(pipe_name, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_READMODE_BYTE | PIPE_WAIT, PIPE_UNLIMITED_INSTANCES, (int) global_system_variables. net_buffer_length, (int) global_system_variables. net_buffer_length, NMPWAIT_USE_DEFAULT_WAIT, &saPipeSecurity)) == INVALID_HANDLE_VALUE) { sql_perror("Can't create new named pipe!"); break; // Abort } } hConnectedPipe = hPipe; /* create new pipe for new connection */ if ((hPipe = CreateNamedPipe(pipe_name, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_READMODE_BYTE | PIPE_WAIT, PIPE_UNLIMITED_INSTANCES, (int) global_system_variables.net_buffer_length, (int) global_system_variables.net_buffer_length, NMPWAIT_USE_DEFAULT_WAIT, &saPipeSecurity)) == INVALID_HANDLE_VALUE) { sql_perror("Can't create new named pipe!"); hPipe=hConnectedPipe; continue; // We have to try again } if (!(thd = new THD)) { DisconnectNamedPipe(hConnectedPipe); CloseHandle(hConnectedPipe); continue; } if (!(thd->net.vio = vio_new_win32pipe(hConnectedPipe)) || my_net_init(&thd->net, thd->net.vio)) { close_connection(thd, ER_OUT_OF_RESOURCES, 1); delete thd; continue; } /* Host is unknown */ thd->security_ctx->host= my_strdup(my_localhost, MYF(0)); create_new_thread(thd); } decrement_handler_count(); DBUG_RETURN(0); } #endif /* __NT__ */ /* Thread of shared memory's service SYNOPSIS handle_connections_shared_memory() arg Arguments of thread */ #ifdef HAVE_SMEM pthread_handler_t handle_connections_shared_memory(void *arg) { /* file-mapping object, use for create shared memory */ HANDLE handle_connect_file_map= 0; char *handle_connect_map= 0; // pointer on shared memory HANDLE event_connect_answer= 0; ulong smem_buffer_length= shared_memory_buffer_length + 4; ulong connect_number= 1; char tmp[63]; char *suffix_pos; char connect_number_char[22], *p; const char *errmsg= 0; SECURITY_ATTRIBUTES *sa_event= 0, *sa_mapping= 0; my_thread_init(); DBUG_ENTER("handle_connections_shared_memorys"); DBUG_PRINT("general",("Waiting for allocated shared memory.")); if (my_security_attr_create(&sa_event, &errmsg, GENERIC_ALL, SYNCHRONIZE | EVENT_MODIFY_STATE)) goto error; if (my_security_attr_create(&sa_mapping, &errmsg, GENERIC_ALL, FILE_MAP_READ | FILE_MAP_WRITE)) goto error; /* The name of event and file-mapping events create agree next rule: shared_memory_base_name+unique_part Where: shared_memory_base_name is unique value for each server unique_part is unique value for each object (events and file-mapping) */ suffix_pos= strxmov(tmp,shared_memory_base_name,"_",NullS); strmov(suffix_pos, "CONNECT_REQUEST"); if ((smem_event_connect_request= CreateEvent(sa_event, FALSE, FALSE, tmp)) == 0) { errmsg= "Could not create request event"; goto error; } strmov(suffix_pos, "CONNECT_ANSWER"); if ((event_connect_answer= CreateEvent(sa_event, FALSE, FALSE, tmp)) == 0) { errmsg="Could not create answer event"; goto error; } strmov(suffix_pos, "CONNECT_DATA"); if ((handle_connect_file_map= CreateFileMapping(INVALID_HANDLE_VALUE, sa_mapping, PAGE_READWRITE, 0, sizeof(connect_number), tmp)) == 0) { errmsg= "Could not create file mapping"; goto error; } if ((handle_connect_map= (char *)MapViewOfFile(handle_connect_file_map, FILE_MAP_WRITE,0,0, sizeof(DWORD))) == 0) { errmsg= "Could not create shared memory service"; goto error; } while (!abort_loop) { /* Wait a request from client */ WaitForSingleObject(smem_event_connect_request,INFINITE); /* it can be after shutdown command */ if (abort_loop) goto error; HANDLE handle_client_file_map= 0; char *handle_client_map= 0; HANDLE event_client_wrote= 0; HANDLE event_client_read= 0; // for transfer data server <-> client HANDLE event_server_wrote= 0; HANDLE event_server_read= 0; HANDLE event_conn_closed= 0; THD *thd= 0; p= int10_to_str(connect_number, connect_number_char, 10); /* The name of event and file-mapping events create agree next rule: shared_memory_base_name+unique_part+number_of_connection Where: shared_memory_base_name is uniquel value for each server unique_part is unique value for each object (events and file-mapping) number_of_connection is connection-number between server and client */ suffix_pos= strxmov(tmp,shared_memory_base_name,"_",connect_number_char, "_",NullS); strmov(suffix_pos, "DATA"); if ((handle_client_file_map= CreateFileMapping(INVALID_HANDLE_VALUE, sa_mapping, PAGE_READWRITE, 0, smem_buffer_length, tmp)) == 0) { errmsg= "Could not create file mapping"; goto errorconn; } if ((handle_client_map= (char*)MapViewOfFile(handle_client_file_map, FILE_MAP_WRITE,0,0, smem_buffer_length)) == 0) { errmsg= "Could not create memory map"; goto errorconn; } strmov(suffix_pos, "CLIENT_WROTE"); if ((event_client_wrote= CreateEvent(sa_event, FALSE, FALSE, tmp)) == 0) { errmsg= "Could not create client write event"; goto errorconn; } strmov(suffix_pos, "CLIENT_READ"); if ((event_client_read= CreateEvent(sa_event, FALSE, FALSE, tmp)) == 0) { errmsg= "Could not create client read event"; goto errorconn; } strmov(suffix_pos, "SERVER_READ"); if ((event_server_read= CreateEvent(sa_event, FALSE, FALSE, tmp)) == 0) { errmsg= "Could not create server read event"; goto errorconn; } strmov(suffix_pos, "SERVER_WROTE"); if ((event_server_wrote= CreateEvent(sa_event, FALSE, FALSE, tmp)) == 0) { errmsg= "Could not create server write event"; goto errorconn; } strmov(suffix_pos, "CONNECTION_CLOSED"); if ((event_conn_closed= CreateEvent(sa_event, TRUE, FALSE, tmp)) == 0) { errmsg= "Could not create closed connection event"; goto errorconn; } if (abort_loop) goto errorconn; if (!(thd= new THD)) goto errorconn; /* Send number of connection to client */ int4store(handle_connect_map, connect_number); if (!SetEvent(event_connect_answer)) { errmsg= "Could not send answer event"; goto errorconn; } /* Set event that client should receive data */ if (!SetEvent(event_client_read)) { errmsg= "Could not set client to read mode"; goto errorconn; } if (!(thd->net.vio= vio_new_win32shared_memory(&thd->net, handle_client_file_map, handle_client_map, event_client_wrote, event_client_read, event_server_wrote, event_server_read, event_conn_closed)) || my_net_init(&thd->net, thd->net.vio)) { close_connection(thd, ER_OUT_OF_RESOURCES, 1); errmsg= 0; goto errorconn; } thd->security_ctx->host= my_strdup(my_localhost, MYF(0)); /* Host is unknown */ create_new_thread(thd); connect_number++; continue; errorconn: /* Could not form connection; Free used handlers/memort and retry */ if (errmsg) { char buff[180]; strxmov(buff, "Can't create shared memory connection: ", errmsg, ".", NullS); sql_perror(buff); } if (handle_client_file_map) CloseHandle(handle_client_file_map); if (handle_client_map) UnmapViewOfFile(handle_client_map); if (event_server_wrote) CloseHandle(event_server_wrote); if (event_server_read) CloseHandle(event_server_read); if (event_client_wrote) CloseHandle(event_client_wrote); if (event_client_read) CloseHandle(event_client_read); if (event_conn_closed) CloseHandle(event_conn_closed); delete thd; } /* End shared memory handling */ error: if (errmsg) { char buff[180]; strxmov(buff, "Can't create shared memory service: ", errmsg, ".", NullS); sql_perror(buff); } my_security_attr_free(sa_event); my_security_attr_free(sa_mapping); if (handle_connect_map) UnmapViewOfFile(handle_connect_map); if (handle_connect_file_map) CloseHandle(handle_connect_file_map); if (event_connect_answer) CloseHandle(event_connect_answer); if (smem_event_connect_request) CloseHandle(smem_event_connect_request); decrement_handler_count(); DBUG_RETURN(0); } #endif /* HAVE_SMEM */ #endif /* EMBEDDED_LIBRARY */ /**************************************************************************** Handle start options ******************************************************************************/ enum options_mysqld { OPT_ISAM_LOG=256, OPT_SKIP_NEW, OPT_SKIP_GRANT, OPT_SKIP_LOCK, OPT_ENABLE_LOCK, OPT_USE_LOCKING, OPT_SOCKET, OPT_UPDATE_LOG, OPT_BIN_LOG, OPT_SKIP_RESOLVE, OPT_SKIP_NETWORKING, OPT_BIN_LOG_INDEX, OPT_BIND_ADDRESS, OPT_PID_FILE, OPT_SKIP_PRIOR, OPT_BIG_TABLES, OPT_STANDALONE, OPT_ONE_THREAD, OPT_CONSOLE, OPT_LOW_PRIORITY_UPDATES, OPT_SKIP_HOST_CACHE, OPT_SHORT_LOG_FORMAT, OPT_FLUSH, OPT_SAFE, OPT_BOOTSTRAP, OPT_SKIP_SHOW_DB, OPT_STORAGE_ENGINE, OPT_INIT_FILE, OPT_DELAY_KEY_WRITE_ALL, OPT_SLOW_QUERY_LOG, OPT_DELAY_KEY_WRITE, OPT_CHARSETS_DIR, OPT_BDB_HOME, OPT_BDB_LOG, OPT_BDB_TMP, OPT_BDB_SYNC, OPT_BDB_LOCK, OPT_BDB, OPT_BDB_NO_RECOVER, OPT_BDB_SHARED, OPT_MASTER_HOST, OPT_MASTER_USER, OPT_MASTER_PASSWORD, OPT_MASTER_PORT, OPT_MASTER_INFO_FILE, OPT_MASTER_CONNECT_RETRY, OPT_MASTER_RETRY_COUNT, OPT_LOG_TC, OPT_LOG_TC_SIZE, OPT_MASTER_SSL, OPT_MASTER_SSL_KEY, OPT_MASTER_SSL_CERT, OPT_MASTER_SSL_CAPATH, OPT_MASTER_SSL_CIPHER, OPT_MASTER_SSL_CA, OPT_SQL_BIN_UPDATE_SAME, OPT_REPLICATE_DO_DB, OPT_REPLICATE_IGNORE_DB, OPT_LOG_SLAVE_UPDATES, OPT_BINLOG_DO_DB, OPT_BINLOG_IGNORE_DB, OPT_WANT_CORE, OPT_CONCURRENT_INSERT, OPT_MEMLOCK, OPT_MYISAM_RECOVER, OPT_REPLICATE_REWRITE_DB, OPT_SERVER_ID, OPT_SKIP_SLAVE_START, OPT_SKIP_INNOBASE, OPT_SAFEMALLOC_MEM_LIMIT, OPT_REPLICATE_DO_TABLE, OPT_REPLICATE_IGNORE_TABLE, OPT_REPLICATE_WILD_DO_TABLE, OPT_REPLICATE_WILD_IGNORE_TABLE, OPT_REPLICATE_SAME_SERVER_ID, OPT_DISCONNECT_SLAVE_EVENT_COUNT, OPT_TC_HEURISTIC_RECOVER, OPT_ABORT_SLAVE_EVENT_COUNT, OPT_INNODB_DATA_HOME_DIR, OPT_INNODB_DATA_FILE_PATH, OPT_INNODB_LOG_GROUP_HOME_DIR, OPT_INNODB_LOG_ARCH_DIR, OPT_INNODB_LOG_ARCHIVE, OPT_INNODB_FLUSH_LOG_AT_TRX_COMMIT, OPT_INNODB_FLUSH_METHOD, OPT_INNODB_DOUBLEWRITE, OPT_INNODB_CHECKSUMS, OPT_INNODB_FAST_SHUTDOWN, OPT_INNODB_FILE_PER_TABLE, OPT_CRASH_BINLOG_INNODB, OPT_INNODB_LOCKS_UNSAFE_FOR_BINLOG, OPT_LOG_BIN_TRUST_FUNCTION_CREATORS, OPT_SAFE_SHOW_DB, OPT_INNODB_SAFE_BINLOG, OPT_INNODB, OPT_ISAM, OPT_ENGINE_CONDITION_PUSHDOWN, OPT_NDBCLUSTER, OPT_NDB_CONNECTSTRING, OPT_NDB_USE_EXACT_COUNT, OPT_NDB_FORCE_SEND, OPT_NDB_AUTOINCREMENT_PREFETCH_SZ, OPT_NDB_SHM, OPT_NDB_OPTIMIZED_NODE_SELECTION, OPT_NDB_CACHE_CHECK_TIME, OPT_NDB_MGMD, OPT_NDB_NODEID, OPT_NDB_DISTRIBUTION, OPT_NDB_INDEX_STAT_ENABLE, OPT_NDB_INDEX_STAT_CACHE_ENTRIES, OPT_NDB_INDEX_STAT_UPDATE_FREQ, OPT_SKIP_SAFEMALLOC, OPT_TEMP_POOL, OPT_TX_ISOLATION, OPT_COMPLETION_TYPE, OPT_SKIP_STACK_TRACE, OPT_SKIP_SYMLINKS, OPT_MAX_BINLOG_DUMP_EVENTS, OPT_SPORADIC_BINLOG_DUMP_FAIL, OPT_SAFE_USER_CREATE, OPT_SQL_MODE, OPT_HAVE_NAMED_PIPE, OPT_DO_PSTACK, OPT_REPORT_HOST, OPT_REPORT_USER, OPT_REPORT_PASSWORD, OPT_REPORT_PORT, OPT_SHOW_SLAVE_AUTH_INFO, OPT_SLAVE_LOAD_TMPDIR, OPT_NO_MIX_TYPE, OPT_RPL_RECOVERY_RANK,OPT_INIT_RPL_ROLE, OPT_RELAY_LOG, OPT_RELAY_LOG_INDEX, OPT_RELAY_LOG_INFO_FILE, OPT_SLAVE_SKIP_ERRORS, OPT_DES_KEY_FILE, OPT_LOCAL_INFILE, OPT_SSL_SSL, OPT_SSL_KEY, OPT_SSL_CERT, OPT_SSL_CA, OPT_SSL_CAPATH, OPT_SSL_CIPHER, OPT_BACK_LOG, OPT_BINLOG_CACHE_SIZE, OPT_CONNECT_TIMEOUT, OPT_DELAYED_INSERT_TIMEOUT, OPT_DELAYED_INSERT_LIMIT, OPT_DELAYED_QUEUE_SIZE, OPT_FLUSH_TIME, OPT_FT_MIN_WORD_LEN, OPT_FT_BOOLEAN_SYNTAX, OPT_FT_MAX_WORD_LEN, OPT_FT_QUERY_EXPANSION_LIMIT, OPT_FT_STOPWORD_FILE, OPT_INTERACTIVE_TIMEOUT, OPT_JOIN_BUFF_SIZE, OPT_KEY_BUFFER_SIZE, OPT_KEY_CACHE_BLOCK_SIZE, OPT_KEY_CACHE_DIVISION_LIMIT, OPT_KEY_CACHE_AGE_THRESHOLD, OPT_LONG_QUERY_TIME, OPT_LOWER_CASE_TABLE_NAMES, OPT_MAX_ALLOWED_PACKET, OPT_MAX_BINLOG_CACHE_SIZE, OPT_MAX_BINLOG_SIZE, OPT_MAX_CONNECTIONS, OPT_MAX_CONNECT_ERRORS, OPT_MAX_DELAYED_THREADS, OPT_MAX_HEP_TABLE_SIZE, OPT_MAX_JOIN_SIZE, OPT_MAX_RELAY_LOG_SIZE, OPT_MAX_SORT_LENGTH, OPT_MAX_SEEKS_FOR_KEY, OPT_MAX_TMP_TABLES, OPT_MAX_USER_CONNECTIONS, OPT_MAX_LENGTH_FOR_SORT_DATA, OPT_MAX_WRITE_LOCK_COUNT, OPT_BULK_INSERT_BUFFER_SIZE, OPT_MAX_ERROR_COUNT, OPT_MULTI_RANGE_COUNT, OPT_MYISAM_DATA_POINTER_SIZE, OPT_MYISAM_BLOCK_SIZE, OPT_MYISAM_MAX_EXTRA_SORT_FILE_SIZE, OPT_MYISAM_MAX_SORT_FILE_SIZE, OPT_MYISAM_SORT_BUFFER_SIZE, OPT_MYISAM_STATS_METHOD, OPT_NET_BUFFER_LENGTH, OPT_NET_RETRY_COUNT, OPT_NET_READ_TIMEOUT, OPT_NET_WRITE_TIMEOUT, OPT_OPEN_FILES_LIMIT, OPT_PRELOAD_BUFFER_SIZE, OPT_QUERY_CACHE_LIMIT, OPT_QUERY_CACHE_MIN_RES_UNIT, OPT_QUERY_CACHE_SIZE, OPT_QUERY_CACHE_TYPE, OPT_QUERY_CACHE_WLOCK_INVALIDATE, OPT_RECORD_BUFFER, OPT_RECORD_RND_BUFFER, OPT_DIV_PRECINCREMENT, OPT_RELAY_LOG_SPACE_LIMIT, OPT_RELAY_LOG_PURGE, OPT_SLAVE_NET_TIMEOUT, OPT_SLAVE_COMPRESSED_PROTOCOL, OPT_SLOW_LAUNCH_TIME, OPT_SLAVE_TRANS_RETRIES, OPT_READONLY, OPT_DEBUGGING, OPT_SORT_BUFFER, OPT_TABLE_OPEN_CACHE, OPT_TABLE_DEF_CACHE, OPT_THREAD_CONCURRENCY, OPT_THREAD_CACHE_SIZE, OPT_TMP_TABLE_SIZE, OPT_THREAD_STACK, OPT_WAIT_TIMEOUT, OPT_MYISAM_REPAIR_THREADS, OPT_INNODB_MIRRORED_LOG_GROUPS, OPT_INNODB_LOG_FILES_IN_GROUP, OPT_INNODB_LOG_FILE_SIZE, OPT_INNODB_LOG_BUFFER_SIZE, OPT_INNODB_BUFFER_POOL_SIZE, OPT_INNODB_BUFFER_POOL_AWE_MEM_MB, OPT_INNODB_ADDITIONAL_MEM_POOL_SIZE, OPT_INNODB_MAX_PURGE_LAG, OPT_INNODB_FILE_IO_THREADS, OPT_INNODB_LOCK_WAIT_TIMEOUT, OPT_INNODB_THREAD_CONCURRENCY, OPT_INNODB_FORCE_RECOVERY, OPT_INNODB_STATUS_FILE, OPT_INNODB_MAX_DIRTY_PAGES_PCT, OPT_INNODB_TABLE_LOCKS, OPT_INNODB_SUPPORT_XA, OPT_INNODB_OPEN_FILES, OPT_INNODB_AUTOEXTEND_INCREMENT, OPT_INNODB_SYNC_SPIN_LOOPS, OPT_INNODB_CONCURRENCY_TICKETS, OPT_INNODB_THREAD_SLEEP_DELAY, OPT_BDB_CACHE_SIZE, OPT_BDB_CACHE_PARTS, OPT_BDB_LOG_BUFFER_SIZE, OPT_BDB_MAX_LOCK, OPT_BDB_REGION_SIZE, OPT_ERROR_LOG_FILE, OPT_DEFAULT_WEEK_FORMAT, OPT_RANGE_ALLOC_BLOCK_SIZE, OPT_ALLOW_SUSPICIOUS_UDFS, OPT_QUERY_ALLOC_BLOCK_SIZE, OPT_QUERY_PREALLOC_SIZE, OPT_TRANS_ALLOC_BLOCK_SIZE, OPT_TRANS_PREALLOC_SIZE, OPT_SYNC_FRM, OPT_SYNC_BINLOG, OPT_SYNC_REPLICATION, OPT_SYNC_REPLICATION_SLAVE_ID, OPT_SYNC_REPLICATION_TIMEOUT, OPT_BDB_NOSYNC, OPT_ENABLE_SHARED_MEMORY, OPT_SHARED_MEMORY_BASE_NAME, OPT_OLD_PASSWORDS, OPT_OLD_ALTER_TABLE, OPT_EXPIRE_LOGS_DAYS, OPT_GROUP_CONCAT_MAX_LEN, OPT_DEFAULT_COLLATION, OPT_CHARACTER_SET_CLIENT_HANDSHAKE, OPT_INIT_CONNECT, OPT_INIT_SLAVE, OPT_SECURE_AUTH, OPT_DATE_FORMAT, OPT_TIME_FORMAT, OPT_DATETIME_FORMAT, OPT_LOG_QUERIES_NOT_USING_INDEXES, OPT_DEFAULT_TIME_ZONE, OPT_OPTIMIZER_SEARCH_DEPTH, OPT_OPTIMIZER_PRUNE_LEVEL, OPT_UPDATABLE_VIEWS_WITH_LIMIT, OPT_SP_AUTOMATIC_PRIVILEGES, OPT_MAX_SP_RECURSION_DEPTH, OPT_AUTO_INCREMENT, OPT_AUTO_INCREMENT_OFFSET, OPT_ENABLE_LARGE_PAGES, OPT_TIMED_MUTEXES, OPT_OLD_STYLE_USER_LIMITS, OPT_LOG_SLOW_ADMIN_STATEMENTS, OPT_TABLE_LOCK_WAIT_TIMEOUT, OPT_PLUGIN_DIR }; #define LONG_TIMEOUT ((ulong) 3600L*24L*365L) struct my_option my_long_options[] = { {"help", '?', "Display this help and exit.", (gptr*) &opt_help, (gptr*) &opt_help, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_REPLICATION {"abort-slave-event-count", OPT_ABORT_SLAVE_EVENT_COUNT, "Option used by mysql-test for debugging and testing of replication.", (gptr*) &abort_slave_event_count, (gptr*) &abort_slave_event_count, 0, GET_INT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #endif /* HAVE_REPLICATION */ {"ansi", 'a', "Use ANSI SQL syntax instead of MySQL syntax. This mode will also set transaction isolation level 'serializable'.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"allow-suspicious-udfs", OPT_ALLOW_SUSPICIOUS_UDFS, "Allows use of UDFs consisting of only one symbol xxx() " "without corresponding xxx_init() or xxx_deinit(). That also means " "that one can load any function from any library, for example exit() " "from libc.so", (gptr*) &opt_allow_suspicious_udfs, (gptr*) &opt_allow_suspicious_udfs, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"auto-increment-increment", OPT_AUTO_INCREMENT, "Auto-increment columns are incremented by this", (gptr*) &global_system_variables.auto_increment_increment, (gptr*) &max_system_variables.auto_increment_increment, 0, GET_ULONG, OPT_ARG, 1, 1, 65535, 0, 1, 0 }, {"auto-increment-offset", OPT_AUTO_INCREMENT_OFFSET, "Offset added to Auto-increment columns. Used when auto-increment-increment != 1", (gptr*) &global_system_variables.auto_increment_offset, (gptr*) &max_system_variables.auto_increment_offset, 0, GET_ULONG, OPT_ARG, 1, 1, 65535, 0, 1, 0 }, {"automatic-sp-privileges", OPT_SP_AUTOMATIC_PRIVILEGES, "Creating and dropping stored procedures alters ACLs. Disable with --skip-automatic-sp-privileges.", (gptr*) &sp_automatic_privileges, (gptr*) &sp_automatic_privileges, 0, GET_BOOL, NO_ARG, 1, 0, 0, 0, 0, 0}, {"basedir", 'b', "Path to installation directory. All paths are usually resolved relative to this.", (gptr*) &mysql_home_ptr, (gptr*) &mysql_home_ptr, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"bdb", OPT_BDB, "Enable Berkeley DB (if this version of MySQL supports it). \ Disable with --skip-bdb (will save memory).", (gptr*) &opt_bdb, (gptr*) &opt_bdb, 0, GET_BOOL, NO_ARG, OPT_BDB_DEFAULT, 0, 0, 0, 0, 0}, #ifdef WITH_BERKELEY_STORAGE_ENGINE {"bdb-home", OPT_BDB_HOME, "Berkeley home directory.", (gptr*) &berkeley_home, (gptr*) &berkeley_home, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"bdb-lock-detect", OPT_BDB_LOCK, "Berkeley lock detect (DEFAULT, OLDEST, RANDOM or YOUNGEST, # sec).", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"bdb-logdir", OPT_BDB_LOG, "Berkeley DB log file directory.", (gptr*) &berkeley_logdir, (gptr*) &berkeley_logdir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"bdb-no-recover", OPT_BDB_NO_RECOVER, "Don't try to recover Berkeley DB tables on start.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"bdb-no-sync", OPT_BDB_NOSYNC, "This option is deprecated, use --skip-sync-bdb-logs instead", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"bdb-shared-data", OPT_BDB_SHARED, "Start Berkeley DB in multi-process mode.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"bdb-tmpdir", OPT_BDB_TMP, "Berkeley DB tempfile name.", (gptr*) &berkeley_tmpdir, (gptr*) &berkeley_tmpdir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #endif /* WITH_BERKELEY_STORAGE_ENGINE */ {"big-tables", OPT_BIG_TABLES, "Allow big result sets by saving all temporary sets on file (Solves most 'table full' errors).", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"bind-address", OPT_BIND_ADDRESS, "IP address to bind to.", (gptr*) &my_bind_addr_str, (gptr*) &my_bind_addr_str, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"binlog-do-db", OPT_BINLOG_DO_DB, "Tells the master it should log updates for the specified database, and exclude all others not explicitly mentioned.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"binlog-ignore-db", OPT_BINLOG_IGNORE_DB, "Tells the master that updates to the given database should not be logged tothe binary log.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"bootstrap", OPT_BOOTSTRAP, "Used by mysql installation scripts.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"character-set-client-handshake", OPT_CHARACTER_SET_CLIENT_HANDSHAKE, "Don't use client side character set value sent during handshake.", (gptr*) &opt_character_set_client_handshake, (gptr*) &opt_character_set_client_handshake, 0, GET_BOOL, NO_ARG, 1, 0, 0, 0, 0, 0}, {"character-set-server", 'C', "Set the default character set.", (gptr*) &default_character_set_name, (gptr*) &default_character_set_name, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 }, {"character-sets-dir", OPT_CHARSETS_DIR, "Directory where character sets are.", (gptr*) &charsets_dir, (gptr*) &charsets_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"chroot", 'r', "Chroot mysqld daemon during startup.", (gptr*) &mysqld_chroot, (gptr*) &mysqld_chroot, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"collation-server", OPT_DEFAULT_COLLATION, "Set the default collation.", (gptr*) &default_collation_name, (gptr*) &default_collation_name, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 }, {"completion-type", OPT_COMPLETION_TYPE, "Default completion type.", (gptr*) &global_system_variables.completion_type, (gptr*) &max_system_variables.completion_type, 0, GET_ULONG, REQUIRED_ARG, 0, 0, 2, 0, 1, 0}, {"concurrent-insert", OPT_CONCURRENT_INSERT, "Use concurrent insert with MyISAM. Disable with --concurrent-insert=0", (gptr*) &myisam_concurrent_insert, (gptr*) &myisam_concurrent_insert, 0, GET_LONG, OPT_ARG, 1, 0, 2, 0, 0, 0}, {"console", OPT_CONSOLE, "Write error output on screen; Don't remove the console window on windows.", (gptr*) &opt_console, (gptr*) &opt_console, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"core-file", OPT_WANT_CORE, "Write core on errors.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"datadir", 'h', "Path to the database root.", (gptr*) &mysql_data_home, (gptr*) &mysql_data_home, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #ifndef DBUG_OFF {"debug", '#', "Debug log.", (gptr*) &default_dbug_option, (gptr*) &default_dbug_option, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, #endif {"default-character-set", 'C', "Set the default character set (deprecated option, use --character-set-server instead).", (gptr*) &default_character_set_name, (gptr*) &default_character_set_name, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 }, {"default-collation", OPT_DEFAULT_COLLATION, "Set the default collation (deprecated option, use --collation-server instead).", (gptr*) &default_collation_name, (gptr*) &default_collation_name, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 }, {"default-storage-engine", OPT_STORAGE_ENGINE, "Set the default storage engine (table type) for tables.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"default-table-type", OPT_STORAGE_ENGINE, "(deprecated) Use --default-storage-engine.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"default-time-zone", OPT_DEFAULT_TIME_ZONE, "Set the default time zone.", (gptr*) &default_tz_name, (gptr*) &default_tz_name, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 }, {"delay-key-write", OPT_DELAY_KEY_WRITE, "Type of DELAY_KEY_WRITE.", 0,0,0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"delay-key-write-for-all-tables", OPT_DELAY_KEY_WRITE_ALL, "Don't flush key buffers between writes for any MyISAM table (Deprecated option, use --delay-key-write=all instead).", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_OPENSSL {"des-key-file", OPT_DES_KEY_FILE, "Load keys for des_encrypt() and des_encrypt from given file.", (gptr*) &des_key_file, (gptr*) &des_key_file, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #endif /* HAVE_OPENSSL */ #ifdef HAVE_REPLICATION {"disconnect-slave-event-count", OPT_DISCONNECT_SLAVE_EVENT_COUNT, "Option used by mysql-test for debugging and testing of replication.", (gptr*) &disconnect_slave_event_count, (gptr*) &disconnect_slave_event_count, 0, GET_INT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #endif /* HAVE_REPLICATION */ {"enable-locking", OPT_ENABLE_LOCK, "Deprecated option, use --external-locking instead.", (gptr*) &opt_external_locking, (gptr*) &opt_external_locking, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #ifdef __NT__ {"enable-named-pipe", OPT_HAVE_NAMED_PIPE, "Enable the named pipe (NT).", (gptr*) &opt_enable_named_pipe, (gptr*) &opt_enable_named_pipe, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif {"enable-pstack", OPT_DO_PSTACK, "Print a symbolic stack trace on failure.", (gptr*) &opt_do_pstack, (gptr*) &opt_do_pstack, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"engine-condition-pushdown", OPT_ENGINE_CONDITION_PUSHDOWN, "Push supported query conditions to the storage engine.", (gptr*) &global_system_variables.engine_condition_pushdown, (gptr*) &global_system_variables.engine_condition_pushdown, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"exit-info", 'T', "Used for debugging; Use at your own risk!", 0, 0, 0, GET_LONG, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"external-locking", OPT_USE_LOCKING, "Use system (external) locking. With this option enabled you can run myisamchk to test (not repair) tables while the MySQL server is running.", (gptr*) &opt_external_locking, (gptr*) &opt_external_locking, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"flush", OPT_FLUSH, "Flush tables to disk between SQL commands.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, /* We must always support the next option to make scripts like mysqltest easier to do */ {"gdb", OPT_DEBUGGING, "Set up signals usable for debugging", (gptr*) &opt_debugging, (gptr*) &opt_debugging, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_LARGE_PAGES {"large-pages", OPT_ENABLE_LARGE_PAGES, "Enable support for large pages. \ Disable with --skip-large-pages.", (gptr*) &opt_large_pages, (gptr*) &opt_large_pages, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif {"init-connect", OPT_INIT_CONNECT, "Command(s) that are executed for each new connection", (gptr*) &opt_init_connect, (gptr*) &opt_init_connect, 0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"init-file", OPT_INIT_FILE, "Read SQL commands from this file at startup.", (gptr*) &opt_init_file, (gptr*) &opt_init_file, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"init-rpl-role", OPT_INIT_RPL_ROLE, "Set the replication role.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"init-slave", OPT_INIT_SLAVE, "Command(s) that are executed when a slave connects to this master", (gptr*) &opt_init_slave, (gptr*) &opt_init_slave, 0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"innodb", OPT_INNODB, "Enable InnoDB (if this version of MySQL supports it). \ Disable with --skip-innodb (will save memory).", (gptr*) &opt_innodb, (gptr*) &opt_innodb, 0, GET_BOOL, NO_ARG, OPT_INNODB_DEFAULT, 0, 0, 0, 0, 0}, #ifdef WITH_INNOBASE_STORAGE_ENGINE {"innodb_checksums", OPT_INNODB_CHECKSUMS, "Enable InnoDB checksums validation (enabled by default). \ Disable with --skip-innodb-checksums.", (gptr*) &innobase_use_checksums, (gptr*) &innobase_use_checksums, 0, GET_BOOL, NO_ARG, 1, 0, 0, 0, 0, 0}, #endif {"innodb_data_file_path", OPT_INNODB_DATA_FILE_PATH, "Path to individual files and their sizes.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #ifdef WITH_INNOBASE_STORAGE_ENGINE {"innodb_data_home_dir", OPT_INNODB_DATA_HOME_DIR, "The common part for InnoDB table spaces.", (gptr*) &innobase_data_home_dir, (gptr*) &innobase_data_home_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"innodb_doublewrite", OPT_INNODB_DOUBLEWRITE, "Enable InnoDB doublewrite buffer (enabled by default). \ Disable with --skip-innodb-doublewrite.", (gptr*) &innobase_use_doublewrite, (gptr*) &innobase_use_doublewrite, 0, GET_BOOL, NO_ARG, 1, 0, 0, 0, 0, 0}, {"innodb_fast_shutdown", OPT_INNODB_FAST_SHUTDOWN, "Speeds up the shutdown process of the InnoDB storage engine. Possible " "values are 0, 1 (faster)" /* NetWare can't close unclosed files, can't automatically kill remaining threads, etc, so on this OS we disable the crash-like InnoDB shutdown. */ #ifndef __NETWARE__ " or 2 (fastest - crash-like)" #endif ".", (gptr*) &innobase_fast_shutdown, (gptr*) &innobase_fast_shutdown, 0, GET_ULONG, OPT_ARG, 1, 0, IF_NETWARE(1,2), 0, 0, 0}, {"innodb_file_per_table", OPT_INNODB_FILE_PER_TABLE, "Stores each InnoDB table to an .ibd file in the database dir.", (gptr*) &innobase_file_per_table, (gptr*) &innobase_file_per_table, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"innodb_flush_log_at_trx_commit", OPT_INNODB_FLUSH_LOG_AT_TRX_COMMIT, "Set to 0 (write and flush once per second), 1 (write and flush at each commit) or 2 (write at commit, flush once per second).", (gptr*) &innobase_flush_log_at_trx_commit, (gptr*) &innobase_flush_log_at_trx_commit, 0, GET_UINT, OPT_ARG, 1, 0, 2, 0, 0, 0}, {"innodb_flush_method", OPT_INNODB_FLUSH_METHOD, "With which method to flush data.", (gptr*) &innobase_unix_file_flush_method, (gptr*) &innobase_unix_file_flush_method, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"innodb_locks_unsafe_for_binlog", OPT_INNODB_LOCKS_UNSAFE_FOR_BINLOG, "Force InnoDB not to use next-key locking. Instead use only row-level locking", (gptr*) &innobase_locks_unsafe_for_binlog, (gptr*) &innobase_locks_unsafe_for_binlog, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"innodb_log_arch_dir", OPT_INNODB_LOG_ARCH_DIR, "Where full logs should be archived.", (gptr*) &innobase_log_arch_dir, (gptr*) &innobase_log_arch_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"innodb_log_archive", OPT_INNODB_LOG_ARCHIVE, "Set to 1 if you want to have logs archived.", 0, 0, 0, GET_LONG, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"innodb_log_group_home_dir", OPT_INNODB_LOG_GROUP_HOME_DIR, "Path to InnoDB log files.", (gptr*) &innobase_log_group_home_dir, (gptr*) &innobase_log_group_home_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"innodb_max_dirty_pages_pct", OPT_INNODB_MAX_DIRTY_PAGES_PCT, "Percentage of dirty pages allowed in bufferpool.", (gptr*) &srv_max_buf_pool_modified_pct, (gptr*) &srv_max_buf_pool_modified_pct, 0, GET_ULONG, REQUIRED_ARG, 90, 0, 100, 0, 0, 0}, {"innodb_max_purge_lag", OPT_INNODB_MAX_PURGE_LAG, "Desired maximum length of the purge queue (0 = no limit)", (gptr*) &srv_max_purge_lag, (gptr*) &srv_max_purge_lag, 0, GET_LONG, REQUIRED_ARG, 0, 0, ~0L, 0, 1L, 0}, {"innodb_status_file", OPT_INNODB_STATUS_FILE, "Enable SHOW INNODB STATUS output in the innodb_status. file", (gptr*) &innobase_create_status_file, (gptr*) &innobase_create_status_file, 0, GET_BOOL, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"innodb_table_locks", OPT_INNODB_TABLE_LOCKS, "Enable InnoDB locking in LOCK TABLES", (gptr*) &global_system_variables.innodb_table_locks, (gptr*) &global_system_variables.innodb_table_locks, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0}, {"innodb_support_xa", OPT_INNODB_SUPPORT_XA, "Enable InnoDB support for the XA two-phase commit", (gptr*) &global_system_variables.innodb_support_xa, (gptr*) &global_system_variables.innodb_support_xa, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0}, #endif /* End WITH_INNOBASE_STORAGE_ENGINE */ {"isam", OPT_ISAM, "Obsolete. ISAM storage engine is no longer supported.", (gptr*) &opt_isam, (gptr*) &opt_isam, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"language", 'L', "Client error messages in given language. May be given as a full path.", (gptr*) &language_ptr, (gptr*) &language_ptr, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"local-infile", OPT_LOCAL_INFILE, "Enable/disable LOAD DATA LOCAL INFILE (takes values 1|0).", (gptr*) &opt_local_infile, (gptr*) &opt_local_infile, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0}, {"log", 'l', "Log connections and queries to file.", (gptr*) &opt_logname, (gptr*) &opt_logname, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"log-bin", OPT_BIN_LOG, "Log update queries in binary format. Optional (but strongly recommended " "to avoid replication problems if server's hostname changes) argument " "should be the chosen location for the binary log files.", (gptr*) &opt_bin_logname, (gptr*) &opt_bin_logname, 0, GET_STR_ALLOC, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"log-bin-index", OPT_BIN_LOG_INDEX, "File that holds the names for last binary log files.", (gptr*) &opt_binlog_index_name, (gptr*) &opt_binlog_index_name, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #ifndef TO_BE_REMOVED_IN_5_1_OR_6_0 /* In 5.0.6 we introduced the below option, then in 5.0.16 we renamed it to log-bin-trust-function-creators but kept also the old name for compatibility; the behaviour was also changed to apply only to functions (and triggers). In a future release this old name could be removed. */ {"log-bin-trust-routine-creators", OPT_LOG_BIN_TRUST_FUNCTION_CREATORS, "(deprecated) Use log-bin-trust-function-creators.", (gptr*) &trust_function_creators, (gptr*) &trust_function_creators, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif /* This option starts with "log-bin" to emphasize that it is specific of binary logging. */ {"log-bin-trust-function-creators", OPT_LOG_BIN_TRUST_FUNCTION_CREATORS, "If equal to 0 (the default), then when --log-bin is used, creation of " "a function is allowed only to users having the SUPER privilege and only " "if this function may not break binary logging.", (gptr*) &trust_function_creators, (gptr*) &trust_function_creators, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"log-error", OPT_ERROR_LOG_FILE, "Error log file.", (gptr*) &log_error_file_ptr, (gptr*) &log_error_file_ptr, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"log-isam", OPT_ISAM_LOG, "Log all MyISAM changes to file.", (gptr*) &myisam_log_filename, (gptr*) &myisam_log_filename, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"log-long-format", '0', "Log some extra information to update log. Please note that this option is deprecated; see --log-short-format option.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"log-queries-not-using-indexes", OPT_LOG_QUERIES_NOT_USING_INDEXES, "Log queries that are executed without benefit of any index to the slow log if it is open.", (gptr*) &opt_log_queries_not_using_indexes, (gptr*) &opt_log_queries_not_using_indexes, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"log-short-format", OPT_SHORT_LOG_FORMAT, "Don't log extra information to update and slow-query logs.", (gptr*) &opt_short_log_format, (gptr*) &opt_short_log_format, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"log-slave-updates", OPT_LOG_SLAVE_UPDATES, "Tells the slave to log the updates from the slave thread to the binary log. You will need to turn it on if you plan to daisy-chain the slaves.", (gptr*) &opt_log_slave_updates, (gptr*) &opt_log_slave_updates, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"log-slow-admin-statements", OPT_LOG_SLOW_ADMIN_STATEMENTS, "Log slow OPTIMIZE, ANALYZE, ALTER and other administrative statements to the slow log if it is open.", (gptr*) &opt_log_slow_admin_statements, (gptr*) &opt_log_slow_admin_statements, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"log-slow-queries", OPT_SLOW_QUERY_LOG, "Log slow queries to this log file. Defaults logging to hostname-slow.log file. Must be enabled to activate other slow log options.", (gptr*) &opt_slow_logname, (gptr*) &opt_slow_logname, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"log-tc", OPT_LOG_TC, "Path to transaction coordinator log (used for transactions that affect " "more than one storage engine, when binary log is disabled)", (gptr*) &opt_tc_log_file, (gptr*) &opt_tc_log_file, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_MMAP {"log-tc-size", OPT_LOG_TC_SIZE, "Size of transaction coordinator log.", (gptr*) &opt_tc_log_size, (gptr*) &opt_tc_log_size, 0, GET_ULONG, REQUIRED_ARG, TC_LOG_MIN_SIZE, TC_LOG_MIN_SIZE, ~0L, 0, TC_LOG_PAGE_SIZE, 0}, #endif {"log-update", OPT_UPDATE_LOG, "The update log is deprecated since version 5.0, is replaced by the binary \ log and this option justs turns on --log-bin instead.", (gptr*) &opt_update_logname, (gptr*) &opt_update_logname, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"log-warnings", 'W', "Log some not critical warnings to the log file.", (gptr*) &global_system_variables.log_warnings, (gptr*) &max_system_variables.log_warnings, 0, GET_ULONG, OPT_ARG, 1, 0, 0, 0, 0, 0}, {"low-priority-updates", OPT_LOW_PRIORITY_UPDATES, "INSERT/DELETE/UPDATE has lower priority than selects.", (gptr*) &global_system_variables.low_priority_updates, (gptr*) &max_system_variables.low_priority_updates, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"master-connect-retry", OPT_MASTER_CONNECT_RETRY, "The number of seconds the slave thread will sleep before retrying to connect to the master in case the master goes down or the connection is lost.", (gptr*) &master_connect_retry, (gptr*) &master_connect_retry, 0, GET_UINT, REQUIRED_ARG, 60, 0, 0, 0, 0, 0}, {"master-host", OPT_MASTER_HOST, "Master hostname or IP address for replication. If not set, the slave thread will not be started. Note that the setting of master-host will be ignored if there exists a valid master.info file.", (gptr*) &master_host, (gptr*) &master_host, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"master-info-file", OPT_MASTER_INFO_FILE, "The location and name of the file that remembers the master and where the I/O replication \ thread is in the master's binlogs.", (gptr*) &master_info_file, (gptr*) &master_info_file, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"master-password", OPT_MASTER_PASSWORD, "The password the slave thread will authenticate with when connecting to the master. If not set, an empty password is assumed.The value in master.info will take precedence if it can be read.", (gptr*)&master_password, (gptr*)&master_password, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"master-port", OPT_MASTER_PORT, "The port the master is listening on. If not set, the compiled setting of MYSQL_PORT is assumed. If you have not tinkered with configure options, this should be 3306. The value in master.info will take precedence if it can be read.", (gptr*) &master_port, (gptr*) &master_port, 0, GET_UINT, REQUIRED_ARG, MYSQL_PORT, 0, 0, 0, 0, 0}, {"master-retry-count", OPT_MASTER_RETRY_COUNT, "The number of tries the slave will make to connect to the master before giving up.", (gptr*) &master_retry_count, (gptr*) &master_retry_count, 0, GET_ULONG, REQUIRED_ARG, 3600*24, 0, 0, 0, 0, 0}, {"master-ssl", OPT_MASTER_SSL, "Enable the slave to connect to the master using SSL.", (gptr*) &master_ssl, (gptr*) &master_ssl, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"master-ssl-ca", OPT_MASTER_SSL_CA, "Master SSL CA file. Only applies if you have enabled master-ssl.", (gptr*) &master_ssl_ca, (gptr*) &master_ssl_ca, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"master-ssl-capath", OPT_MASTER_SSL_CAPATH, "Master SSL CA path. Only applies if you have enabled master-ssl.", (gptr*) &master_ssl_capath, (gptr*) &master_ssl_capath, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"master-ssl-cert", OPT_MASTER_SSL_CERT, "Master SSL certificate file name. Only applies if you have enabled \ master-ssl", (gptr*) &master_ssl_cert, (gptr*) &master_ssl_cert, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"master-ssl-cipher", OPT_MASTER_SSL_CIPHER, "Master SSL cipher. Only applies if you have enabled master-ssl.", (gptr*) &master_ssl_cipher, (gptr*) &master_ssl_capath, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"master-ssl-key", OPT_MASTER_SSL_KEY, "Master SSL keyfile name. Only applies if you have enabled master-ssl.", (gptr*) &master_ssl_key, (gptr*) &master_ssl_key, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"master-user", OPT_MASTER_USER, "The username the slave thread will use for authentication when connecting to the master. The user must have FILE privilege. If the master user is not set, user test is assumed. The value in master.info will take precedence if it can be read.", (gptr*) &master_user, (gptr*) &master_user, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_REPLICATION {"max-binlog-dump-events", OPT_MAX_BINLOG_DUMP_EVENTS, "Option used by mysql-test for debugging and testing of replication.", (gptr*) &max_binlog_dump_events, (gptr*) &max_binlog_dump_events, 0, GET_INT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #endif /* HAVE_REPLICATION */ {"memlock", OPT_MEMLOCK, "Lock mysqld in memory.", (gptr*) &locked_in_memory, (gptr*) &locked_in_memory, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"myisam-recover", OPT_MYISAM_RECOVER, "Syntax: myisam-recover[=option[,option...]], where option can be DEFAULT, BACKUP, FORCE or QUICK.", (gptr*) &myisam_recover_options_str, (gptr*) &myisam_recover_options_str, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0}, {"ndbcluster", OPT_NDBCLUSTER, "Enable NDB Cluster (if this version of MySQL supports it). \ Disable with --skip-ndbcluster (will save memory).", (gptr*) &opt_ndbcluster, (gptr*) &opt_ndbcluster, 0, GET_BOOL, NO_ARG, OPT_NDBCLUSTER_DEFAULT, 0, 0, 0, 0, 0}, #ifdef WITH_NDBCLUSTER_STORAGE_ENGINE {"ndb-connectstring", OPT_NDB_CONNECTSTRING, "Connect string for ndbcluster.", (gptr*) &opt_ndb_connectstring, (gptr*) &opt_ndb_connectstring, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"ndb-mgmd-host", OPT_NDB_MGMD, "Set host and port for ndb_mgmd. Syntax: hostname[:port]", (gptr*) &opt_ndb_mgmd, (gptr*) &opt_ndb_mgmd, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"ndb-nodeid", OPT_NDB_NODEID, "Nodeid for this mysqlserver in the cluster.", (gptr*) &opt_ndb_nodeid, (gptr*) &opt_ndb_nodeid, 0, GET_INT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"ndb-autoincrement-prefetch-sz", OPT_NDB_AUTOINCREMENT_PREFETCH_SZ, "Specify number of autoincrement values that are prefetched.", (gptr*) &global_system_variables.ndb_autoincrement_prefetch_sz, (gptr*) &global_system_variables.ndb_autoincrement_prefetch_sz, 0, GET_ULONG, REQUIRED_ARG, 32, 1, 256, 0, 0, 0}, {"ndb-distribution", OPT_NDB_DISTRIBUTION, "Default distribution for new tables in ndb", (gptr*) &opt_ndb_distribution, (gptr*) &opt_ndb_distribution, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"ndb-force-send", OPT_NDB_FORCE_SEND, "Force send of buffers to ndb immediately without waiting for " "other threads.", (gptr*) &global_system_variables.ndb_force_send, (gptr*) &global_system_variables.ndb_force_send, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0}, {"ndb_force_send", OPT_NDB_FORCE_SEND, "same as --ndb-force-send.", (gptr*) &global_system_variables.ndb_force_send, (gptr*) &global_system_variables.ndb_force_send, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0}, {"ndb-use-exact-count", OPT_NDB_USE_EXACT_COUNT, "Use exact records count during query planning and for fast " "select count(*), disable for faster queries.", (gptr*) &global_system_variables.ndb_use_exact_count, (gptr*) &global_system_variables.ndb_use_exact_count, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0}, {"ndb_use_exact_count", OPT_NDB_USE_EXACT_COUNT, "same as --ndb-use-exact-count.", (gptr*) &global_system_variables.ndb_use_exact_count, (gptr*) &global_system_variables.ndb_use_exact_count, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0}, {"ndb-shm", OPT_NDB_SHM, "Use shared memory connections when available.", (gptr*) &opt_ndb_shm, (gptr*) &opt_ndb_shm, 0, GET_BOOL, OPT_ARG, OPT_NDB_SHM_DEFAULT, 0, 0, 0, 0, 0}, {"ndb-optimized-node-selection", OPT_NDB_OPTIMIZED_NODE_SELECTION, "Select nodes for transactions in a more optimal way.", (gptr*) &opt_ndb_optimized_node_selection, (gptr*) &opt_ndb_optimized_node_selection, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0}, { "ndb-cache-check-time", OPT_NDB_CACHE_CHECK_TIME, "A dedicated thread is created to, at the given millisecons interval, invalidate the query cache if another MySQL server in the cluster has changed the data in the database.", (gptr*) &opt_ndb_cache_check_time, (gptr*) &opt_ndb_cache_check_time, 0, GET_ULONG, REQUIRED_ARG, 0, 0, LONG_TIMEOUT, 0, 1, 0}, {"ndb-index-stat-enable", OPT_NDB_INDEX_STAT_ENABLE, "Use ndb index statistics in query optimization.", (gptr*) &global_system_variables.ndb_index_stat_enable, (gptr*) &max_system_variables.ndb_index_stat_enable, 0, GET_BOOL, OPT_ARG, 1, 0, 1, 0, 0, 0}, {"ndb-index-stat-cache-entries", OPT_NDB_INDEX_STAT_CACHE_ENTRIES, "Number of start/end keys to store in statistics memory cache." " Zero means no cache and forces query of db nodes always.", (gptr*) &global_system_variables.ndb_index_stat_cache_entries, (gptr*) &max_system_variables.ndb_index_stat_cache_entries, 0, GET_ULONG, OPT_ARG, 32, 0, ~0L, 0, 0, 0}, {"ndb-index-stat-update-freq", OPT_NDB_INDEX_STAT_UPDATE_FREQ, "How often, in the long run, to query db nodes instead of statistics cache." " For example 20 means every 20th time.", (gptr*) &global_system_variables.ndb_index_stat_update_freq, (gptr*) &max_system_variables.ndb_index_stat_update_freq, 0, GET_ULONG, OPT_ARG, 20, 0, ~0L, 0, 0, 0}, #endif {"new", 'n', "Use very new possible 'unsafe' functions.", (gptr*) &global_system_variables.new_mode, (gptr*) &max_system_variables.new_mode, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #ifdef NOT_YET {"no-mix-table-types", OPT_NO_MIX_TYPE, "Don't allow commands with uses two different table types.", (gptr*) &opt_no_mix_types, (gptr*) &opt_no_mix_types, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif {"old-alter-table", OPT_OLD_ALTER_TABLE, "Use old, non-optimized alter table.", (gptr*) &global_system_variables.old_alter_table, (gptr*) &max_system_variables.old_alter_table, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"old-passwords", OPT_OLD_PASSWORDS, "Use old password encryption method (needed for 4.0 and older clients).", (gptr*) &global_system_variables.old_passwords, (gptr*) &max_system_variables.old_passwords, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #ifdef ONE_THREAD {"one-thread", OPT_ONE_THREAD, "Only use one thread (for debugging under Linux).", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif {"old-style-user-limits", OPT_OLD_STYLE_USER_LIMITS, "Enable old-style user limits (before 5.0.3 user resources were counted per each user+host vs. per account)", (gptr*) &opt_old_style_user_limits, (gptr*) &opt_old_style_user_limits, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"pid-file", OPT_PID_FILE, "Pid file used by safe_mysqld.", (gptr*) &pidfile_name_ptr, (gptr*) &pidfile_name_ptr, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"port", 'P', "Port number to use for connection.", (gptr*) &mysqld_port, (gptr*) &mysqld_port, 0, GET_UINT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"relay-log", OPT_RELAY_LOG, "The location and name to use for relay logs.", (gptr*) &opt_relay_logname, (gptr*) &opt_relay_logname, 0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"relay-log-index", OPT_RELAY_LOG_INDEX, "The location and name to use for the file that keeps a list of the last \ relay logs.", (gptr*) &opt_relaylog_index_name, (gptr*) &opt_relaylog_index_name, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"relay-log-info-file", OPT_RELAY_LOG_INFO_FILE, "The location and name of the file that remembers where the SQL replication \ thread is in the relay logs.", (gptr*) &relay_log_info_file, (gptr*) &relay_log_info_file, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"replicate-do-db", OPT_REPLICATE_DO_DB, "Tells the slave thread to restrict replication to the specified database. To specify more than one database, use the directive multiple times, once for each database. Note that this will only work if you do not use cross-database queries such as UPDATE some_db.some_table SET foo='bar' while having selected a different or no database. If you need cross database updates to work, make sure you have 3.23.28 or later, and use replicate-wild-do-table=db_name.%.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"replicate-do-table", OPT_REPLICATE_DO_TABLE, "Tells the slave thread to restrict replication to the specified table. To specify more than one table, use the directive multiple times, once for each table. This will work for cross-database updates, in contrast to replicate-do-db.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"replicate-ignore-db", OPT_REPLICATE_IGNORE_DB, "Tells the slave thread to not replicate to the specified database. To specify more than one database to ignore, use the directive multiple times, once for each database. This option will not work if you use cross database updates. If you need cross database updates to work, make sure you have 3.23.28 or later, and use replicate-wild-ignore-table=db_name.%. ", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"replicate-ignore-table", OPT_REPLICATE_IGNORE_TABLE, "Tells the slave thread to not replicate to the specified table. To specify more than one table to ignore, use the directive multiple times, once for each table. This will work for cross-datbase updates, in contrast to replicate-ignore-db.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"replicate-rewrite-db", OPT_REPLICATE_REWRITE_DB, "Updates to a database with a different name than the original. Example: replicate-rewrite-db=master_db_name->slave_db_name.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"replicate-wild-do-table", OPT_REPLICATE_WILD_DO_TABLE, "Tells the slave thread to restrict replication to the tables that match the specified wildcard pattern. To specify more than one table, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-do-table=foo%.bar% will replicate only updates to tables in all databases that start with foo and whose table names start with bar.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"replicate-wild-ignore-table", OPT_REPLICATE_WILD_IGNORE_TABLE, "Tells the slave thread to not replicate to the tables that match the given wildcard pattern. To specify more than one table to ignore, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-ignore-table=foo%.bar% will not do updates to tables in databases that start with foo and whose table names start with bar.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_REPLICATION {"replicate-same-server-id", OPT_REPLICATE_SAME_SERVER_ID, "In replication, if set to 1, do not skip events having our server id. \ Default value is 0 (to break infinite loops in circular replication). \ Can't be set to 1 if --log-slave-updates is used.", (gptr*) &replicate_same_server_id, (gptr*) &replicate_same_server_id, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif // In replication, we may need to tell the other servers how to connect {"report-host", OPT_REPORT_HOST, "Hostname or IP of the slave to be reported to to the master during slave registration. Will appear in the output of SHOW SLAVE HOSTS. Leave unset if you do not want the slave to register itself with the master. Note that it is not sufficient for the master to simply read the IP of the slave off the socket once the slave connects. Due to NAT and other routing issues, that IP may not be valid for connecting to the slave from the master or other hosts.", (gptr*) &report_host, (gptr*) &report_host, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"report-password", OPT_REPORT_PASSWORD, "Undocumented.", (gptr*) &report_password, (gptr*) &report_password, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"report-port", OPT_REPORT_PORT, "Port for connecting to slave reported to the master during slave registration. Set it only if the slave is listening on a non-default port or if you have a special tunnel from the master or other clients to the slave. If not sure, leave this option unset.", (gptr*) &report_port, (gptr*) &report_port, 0, GET_UINT, REQUIRED_ARG, MYSQL_PORT, 0, 0, 0, 0, 0}, {"report-user", OPT_REPORT_USER, "Undocumented.", (gptr*) &report_user, (gptr*) &report_user, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"rpl-recovery-rank", OPT_RPL_RECOVERY_RANK, "Undocumented.", (gptr*) &rpl_recovery_rank, (gptr*) &rpl_recovery_rank, 0, GET_ULONG, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"safe-mode", OPT_SAFE, "Skip some optimize stages (for testing).", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, #ifndef TO_BE_DELETED {"safe-show-database", OPT_SAFE_SHOW_DB, "Deprecated option; use GRANT SHOW DATABASES instead...", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif {"safe-user-create", OPT_SAFE_USER_CREATE, "Don't allow new user creation by the user who has no write privileges to the mysql.user table.", (gptr*) &opt_safe_user_create, (gptr*) &opt_safe_user_create, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"safemalloc-mem-limit", OPT_SAFEMALLOC_MEM_LIMIT, "Simulate memory shortage when compiled with the --with-debug=full option.", 0, 0, 0, GET_ULL, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"secure-auth", OPT_SECURE_AUTH, "Disallow authentication for accounts that have old (pre-4.1) passwords.", (gptr*) &opt_secure_auth, (gptr*) &opt_secure_auth, 0, GET_BOOL, NO_ARG, my_bool(0), 0, 0, 0, 0, 0}, {"server-id", OPT_SERVER_ID, "Uniquely identifies the server instance in the community of replication partners.", (gptr*) &server_id, (gptr*) &server_id, 0, GET_ULONG, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"set-variable", 'O', "Change the value of a variable. Please note that this option is deprecated;you can set variables directly with --variable-name=value.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_SMEM {"shared-memory", OPT_ENABLE_SHARED_MEMORY, "Enable the shared memory.",(gptr*) &opt_enable_shared_memory, (gptr*) &opt_enable_shared_memory, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif #ifdef HAVE_SMEM {"shared-memory-base-name",OPT_SHARED_MEMORY_BASE_NAME, "Base name of shared memory.", (gptr*) &shared_memory_base_name, (gptr*) &shared_memory_base_name, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #endif {"show-slave-auth-info", OPT_SHOW_SLAVE_AUTH_INFO, "Show user and password in SHOW SLAVE HOSTS on this master", (gptr*) &opt_show_slave_auth_info, (gptr*) &opt_show_slave_auth_info, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-grant-tables", OPT_SKIP_GRANT, "Start without grant tables. This gives all users FULL ACCESS to all tables!", (gptr*) &opt_noacl, (gptr*) &opt_noacl, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-host-cache", OPT_SKIP_HOST_CACHE, "Don't cache host names.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-locking", OPT_SKIP_LOCK, "Deprecated option, use --skip-external-locking instead.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-name-resolve", OPT_SKIP_RESOLVE, "Don't resolve hostnames. All hostnames are IP's or 'localhost'.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-networking", OPT_SKIP_NETWORKING, "Don't allow connection with TCP/IP.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-new", OPT_SKIP_NEW, "Don't use new, possible wrong routines.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, #ifndef DBUG_OFF #ifdef SAFEMALLOC {"skip-safemalloc", OPT_SKIP_SAFEMALLOC, "Don't use the memory allocation checking.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif #endif {"skip-show-database", OPT_SKIP_SHOW_DB, "Don't allow 'SHOW DATABASE' commands.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-slave-start", OPT_SKIP_SLAVE_START, "If set, slave is not autostarted.", (gptr*) &opt_skip_slave_start, (gptr*) &opt_skip_slave_start, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-stack-trace", OPT_SKIP_STACK_TRACE, "Don't print a stack trace on failure.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-symlink", OPT_SKIP_SYMLINKS, "Don't allow symlinking of tables. Deprecated option. Use --skip-symbolic-links instead.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"skip-thread-priority", OPT_SKIP_PRIOR, "Don't give threads different priorities.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_REPLICATION {"slave-load-tmpdir", OPT_SLAVE_LOAD_TMPDIR, "The location where the slave should put its temporary files when \ replicating a LOAD DATA INFILE command.", (gptr*) &slave_load_tmpdir, (gptr*) &slave_load_tmpdir, 0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"slave-skip-errors", OPT_SLAVE_SKIP_ERRORS, "Tells the slave thread to continue replication when a query returns an error from the provided list.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #endif {"socket", OPT_SOCKET, "Socket file to use for connection.", (gptr*) &mysqld_unix_port, (gptr*) &mysqld_unix_port, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_REPLICATION {"sporadic-binlog-dump-fail", OPT_SPORADIC_BINLOG_DUMP_FAIL, "Option used by mysql-test for debugging and testing of replication.", (gptr*) &opt_sporadic_binlog_dump_fail, (gptr*) &opt_sporadic_binlog_dump_fail, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif /* HAVE_REPLICATION */ {"sql-bin-update-same", OPT_SQL_BIN_UPDATE_SAME, "The update log is deprecated since version 5.0, is replaced by the binary \ log and this option does nothing anymore.", 0, 0, 0, GET_DISABLED, NO_ARG, 0, 0, 0, 0, 0, 0}, {"sql-mode", OPT_SQL_MODE, "Syntax: sql-mode=option[,option[,option...]] where option can be one of: REAL_AS_FLOAT, PIPES_AS_CONCAT, ANSI_QUOTES, IGNORE_SPACE, ONLY_FULL_GROUP_BY, NO_UNSIGNED_SUBTRACTION.", (gptr*) &sql_mode_str, (gptr*) &sql_mode_str, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, #ifdef HAVE_OPENSSL #include "sslopt-longopts.h" #endif #ifdef __WIN__ {"standalone", OPT_STANDALONE, "Dummy option to start as a standalone program (NT).", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, #endif {"symbolic-links", 's', "Enable symbolic link support.", (gptr*) &my_use_symdir, (gptr*) &my_use_symdir, 0, GET_BOOL, NO_ARG, IF_PURIFY(0,1), 0, 0, 0, 0, 0}, {"tc-heuristic-recover", OPT_TC_HEURISTIC_RECOVER, "Decision to use in heuristic recover process. Possible values are COMMIT or ROLLBACK", (gptr*) &opt_tc_heuristic_recover, (gptr*) &opt_tc_heuristic_recover, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"temp-pool", OPT_TEMP_POOL, "Using this option will cause most temporary files created to use a small set of names, rather than a unique name for each new file.", (gptr*) &use_temp_pool, (gptr*) &use_temp_pool, 0, GET_BOOL, NO_ARG, 1, 0, 0, 0, 0, 0}, {"timed_mutexes", OPT_TIMED_MUTEXES, "Specify whether to time mutexes (only InnoDB mutexes are currently supported)", (gptr*) &timed_mutexes, (gptr*) &timed_mutexes, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"tmpdir", 't', "Path for temporary files. Several paths may be specified, separated by a " #if defined(__WIN__) || defined(OS2) || defined(__NETWARE__) "semicolon (;)" #else "colon (:)" #endif ", in this case they are used in a round-robin fashion.", (gptr*) &opt_mysql_tmpdir, (gptr*) &opt_mysql_tmpdir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"transaction-isolation", OPT_TX_ISOLATION, "Default transaction isolation level.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"use-symbolic-links", 's', "Enable symbolic link support. Deprecated option; use --symbolic-links instead.", (gptr*) &my_use_symdir, (gptr*) &my_use_symdir, 0, GET_BOOL, NO_ARG, IF_PURIFY(0,1), 0, 0, 0, 0, 0}, {"user", 'u', "Run mysqld daemon as user.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"verbose", 'v', "Used with --help option for detailed help", (gptr*) &opt_verbose, (gptr*) &opt_verbose, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0}, {"version", 'V', "Output version information and exit.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}, {"warnings", 'W', "Deprecated; use --log-warnings instead.", (gptr*) &global_system_variables.log_warnings, (gptr*) &max_system_variables.log_warnings, 0, GET_ULONG, OPT_ARG, 1, 0, ~0L, 0, 0, 0}, { "back_log", OPT_BACK_LOG, "The number of outstanding connection requests MySQL can have. This comes into play when the main MySQL thread gets very many connection requests in a very short time.", (gptr*) &back_log, (gptr*) &back_log, 0, GET_ULONG, REQUIRED_ARG, 50, 1, 65535, 0, 1, 0 }, #ifdef WITH_BERKELEY_STORAGE_ENGINE { "bdb_cache_parts", OPT_BDB_CACHE_PARTS, "Number of parts to use for BDB cache.", (gptr*) &berkeley_cache_parts, (gptr*) &berkeley_cache_parts, 0, GET_ULONG, REQUIRED_ARG, 1, 1, 1024, 0, 1, 0}, { "bdb_cache_size", OPT_BDB_CACHE_SIZE, "The buffer that is allocated to cache index and rows for BDB tables.", (gptr*) &berkeley_cache_size, (gptr*) &berkeley_cache_size, 0, GET_ULL, REQUIRED_ARG, KEY_CACHE_SIZE, 20*1024, (ulonglong) ~0, 0, IO_SIZE, 0}, /* QQ: The following should be removed soon! (bdb_max_lock preferred) */ {"bdb_lock_max", OPT_BDB_MAX_LOCK, "Synonym for bdb_max_lock.", (gptr*) &berkeley_max_lock, (gptr*) &berkeley_max_lock, 0, GET_ULONG, REQUIRED_ARG, 10000, 0, (long) ~0, 0, 1, 0}, {"bdb_log_buffer_size", OPT_BDB_LOG_BUFFER_SIZE, "The buffer that is allocated to cache index and rows for BDB tables.", (gptr*) &berkeley_log_buffer_size, (gptr*) &berkeley_log_buffer_size, 0, GET_ULONG, REQUIRED_ARG, 0, 256*1024L, ~0L, 0, 1024, 0}, {"bdb_max_lock", OPT_BDB_MAX_LOCK, "The maximum number of locks you can have active on a BDB table.", (gptr*) &berkeley_max_lock, (gptr*) &berkeley_max_lock, 0, GET_ULONG, REQUIRED_ARG, 10000, 0, (long) ~0, 0, 1, 0}, {"bdb_region_size", OPT_BDB_REGION_SIZE, "The size of the underlying logging area of the Berkeley DB environment.", (gptr*) &berkeley_region_size, (gptr*) &berkeley_region_size, 0, GET_ULONG, OPT_ARG, 60*1024L, 60*1024L, (long) ~0, 0, 1, 0}, #endif /* WITH_BERKELEY_STORAGE_ENGINE */ {"binlog_cache_size", OPT_BINLOG_CACHE_SIZE, "The size of the cache to hold the SQL statements for the binary log during a transaction. If you often use big, multi-statement transactions you can increase this to get more performance.", (gptr*) &binlog_cache_size, (gptr*) &binlog_cache_size, 0, GET_ULONG, REQUIRED_ARG, 32*1024L, IO_SIZE, ~0L, 0, IO_SIZE, 0}, {"bulk_insert_buffer_size", OPT_BULK_INSERT_BUFFER_SIZE, "Size of tree cache used in bulk insert optimisation. Note that this is a limit per thread!", (gptr*) &global_system_variables.bulk_insert_buff_size, (gptr*) &max_system_variables.bulk_insert_buff_size, 0, GET_ULONG, REQUIRED_ARG, 8192*1024, 0, ~0L, 0, 1, 0}, {"connect_timeout", OPT_CONNECT_TIMEOUT, "The number of seconds the mysqld server is waiting for a connect packet before responding with 'Bad handshake'.", (gptr*) &connect_timeout, (gptr*) &connect_timeout, 0, GET_ULONG, REQUIRED_ARG, CONNECT_TIMEOUT, 2, LONG_TIMEOUT, 0, 1, 0 }, { "date_format", OPT_DATE_FORMAT, "The DATE format (For future).", (gptr*) &opt_date_time_formats[MYSQL_TIMESTAMP_DATE], (gptr*) &opt_date_time_formats[MYSQL_TIMESTAMP_DATE], 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, { "datetime_format", OPT_DATETIME_FORMAT, "The DATETIME/TIMESTAMP format (for future).", (gptr*) &opt_date_time_formats[MYSQL_TIMESTAMP_DATETIME], (gptr*) &opt_date_time_formats[MYSQL_TIMESTAMP_DATETIME], 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, { "default_week_format", OPT_DEFAULT_WEEK_FORMAT, "The default week format used by WEEK() functions.", (gptr*) &global_system_variables.default_week_format, (gptr*) &max_system_variables.default_week_format, 0, GET_ULONG, REQUIRED_ARG, 0, 0, 7L, 0, 1, 0}, {"delayed_insert_limit", OPT_DELAYED_INSERT_LIMIT, "After inserting delayed_insert_limit rows, the INSERT DELAYED handler will check if there are any SELECT statements pending. If so, it allows these to execute before continuing.", (gptr*) &delayed_insert_limit, (gptr*) &delayed_insert_limit, 0, GET_ULONG, REQUIRED_ARG, DELAYED_LIMIT, 1, ~0L, 0, 1, 0}, {"delayed_insert_timeout", OPT_DELAYED_INSERT_TIMEOUT, "How long a INSERT DELAYED thread should wait for INSERT statements before terminating.", (gptr*) &delayed_insert_timeout, (gptr*) &delayed_insert_timeout, 0, GET_ULONG, REQUIRED_ARG, DELAYED_WAIT_TIMEOUT, 1, LONG_TIMEOUT, 0, 1, 0}, { "delayed_queue_size", OPT_DELAYED_QUEUE_SIZE, "What size queue (in rows) should be allocated for handling INSERT DELAYED. If the queue becomes full, any client that does INSERT DELAYED will wait until there is room in the queue again.", (gptr*) &delayed_queue_size, (gptr*) &delayed_queue_size, 0, GET_ULONG, REQUIRED_ARG, DELAYED_QUEUE_SIZE, 1, ~0L, 0, 1, 0}, {"expire_logs_days", OPT_EXPIRE_LOGS_DAYS, "If non-zero, binary logs will be purged after expire_logs_days " "days; possible purges happen at startup and at binary log rotation.", (gptr*) &expire_logs_days, (gptr*) &expire_logs_days, 0, GET_ULONG, REQUIRED_ARG, 0, 0, 99, 0, 1, 0}, { "flush_time", OPT_FLUSH_TIME, "A dedicated thread is created to flush all tables at the given interval.", (gptr*) &flush_time, (gptr*) &flush_time, 0, GET_ULONG, REQUIRED_ARG, FLUSH_TIME, 0, LONG_TIMEOUT, 0, 1, 0}, { "ft_boolean_syntax", OPT_FT_BOOLEAN_SYNTAX, "List of operators for MATCH ... AGAINST ( ... IN BOOLEAN MODE)", 0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, { "ft_max_word_len", OPT_FT_MAX_WORD_LEN, "The maximum length of the word to be included in a FULLTEXT index. Note: FULLTEXT indexes must be rebuilt after changing this variable.", (gptr*) &ft_max_word_len, (gptr*) &ft_max_word_len, 0, GET_ULONG, REQUIRED_ARG, HA_FT_MAXCHARLEN, 10, HA_FT_MAXCHARLEN, 0, 1, 0}, { "ft_min_word_len", OPT_FT_MIN_WORD_LEN, "The minimum length of the word to be included in a FULLTEXT index. Note: FULLTEXT indexes must be rebuilt after changing this variable.", (gptr*) &ft_min_word_len, (gptr*) &ft_min_word_len, 0, GET_ULONG, REQUIRED_ARG, 4, 1, HA_FT_MAXCHARLEN, 0, 1, 0}, { "ft_query_expansion_limit", OPT_FT_QUERY_EXPANSION_LIMIT, "Number of best matches to use for query expansion", (gptr*) &ft_query_expansion_limit, (gptr*) &ft_query_expansion_limit, 0, GET_ULONG, REQUIRED_ARG, 20, 0, 1000, 0, 1, 0}, { "ft_stopword_file", OPT_FT_STOPWORD_FILE, "Use stopwords from this file instead of built-in list.", (gptr*) &ft_stopword_file, (gptr*) &ft_stopword_file, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, { "group_concat_max_len", OPT_GROUP_CONCAT_MAX_LEN, "The maximum length of the result of function group_concat.", (gptr*) &global_system_variables.group_concat_max_len, (gptr*) &max_system_variables.group_concat_max_len, 0, GET_ULONG, REQUIRED_ARG, 1024, 4, (long) ~0, 0, 1, 0}, #ifdef WITH_INNOBASE_STORAGE_ENGINE {"innodb_additional_mem_pool_size", OPT_INNODB_ADDITIONAL_MEM_POOL_SIZE, "Size of a memory pool InnoDB uses to store data dictionary information and other internal data structures.", (gptr*) &innobase_additional_mem_pool_size, (gptr*) &innobase_additional_mem_pool_size, 0, GET_LONG, REQUIRED_ARG, 1*1024*1024L, 512*1024L, ~0L, 0, 1024, 0}, {"innodb_autoextend_increment", OPT_INNODB_AUTOEXTEND_INCREMENT, "Data file autoextend increment in megabytes", (gptr*) &srv_auto_extend_increment, (gptr*) &srv_auto_extend_increment, 0, GET_LONG, REQUIRED_ARG, 8L, 1L, 1000L, 0, 1L, 0}, {"innodb_buffer_pool_awe_mem_mb", OPT_INNODB_BUFFER_POOL_AWE_MEM_MB, "If Windows AWE is used, the size of InnoDB buffer pool allocated from the AWE memory.", (gptr*) &innobase_buffer_pool_awe_mem_mb, (gptr*) &innobase_buffer_pool_awe_mem_mb, 0, GET_LONG, REQUIRED_ARG, 0, 0, 63000, 0, 1, 0}, {"innodb_buffer_pool_size", OPT_INNODB_BUFFER_POOL_SIZE, "The size of the memory buffer InnoDB uses to cache data and indexes of its tables.", (gptr*) &innobase_buffer_pool_size, (gptr*) &innobase_buffer_pool_size, 0, GET_LL, REQUIRED_ARG, 8*1024*1024L, 1024*1024L, LONGLONG_MAX, 0, 1024*1024L, 0}, {"innodb_concurrency_tickets", OPT_INNODB_CONCURRENCY_TICKETS, "Number of times a thread is allowed to enter InnoDB within the same \ SQL query after it has once got the ticket", (gptr*) &srv_n_free_tickets_to_enter, (gptr*) &srv_n_free_tickets_to_enter, 0, GET_LONG, REQUIRED_ARG, 500L, 1L, ~0L, 0, 1L, 0}, {"innodb_file_io_threads", OPT_INNODB_FILE_IO_THREADS, "Number of file I/O threads in InnoDB.", (gptr*) &innobase_file_io_threads, (gptr*) &innobase_file_io_threads, 0, GET_LONG, REQUIRED_ARG, 4, 4, 64, 0, 1, 0}, {"innodb_force_recovery", OPT_INNODB_FORCE_RECOVERY, "Helps to save your data in case the disk image of the database becomes corrupt.", (gptr*) &innobase_force_recovery, (gptr*) &innobase_force_recovery, 0, GET_LONG, REQUIRED_ARG, 0, 0, 6, 0, 1, 0}, {"innodb_lock_wait_timeout", OPT_INNODB_LOCK_WAIT_TIMEOUT, "Timeout in seconds an InnoDB transaction may wait for a lock before being rolled back.", (gptr*) &innobase_lock_wait_timeout, (gptr*) &innobase_lock_wait_timeout, 0, GET_LONG, REQUIRED_ARG, 50, 1, 1024 * 1024 * 1024, 0, 1, 0}, {"innodb_log_buffer_size", OPT_INNODB_LOG_BUFFER_SIZE, "The size of the buffer which InnoDB uses to write log to the log files on disk.", (gptr*) &innobase_log_buffer_size, (gptr*) &innobase_log_buffer_size, 0, GET_LONG, REQUIRED_ARG, 1024*1024L, 256*1024L, ~0L, 0, 1024, 0}, {"innodb_log_file_size", OPT_INNODB_LOG_FILE_SIZE, "Size of each log file in a log group.", (gptr*) &innobase_log_file_size, (gptr*) &innobase_log_file_size, 0, GET_LL, REQUIRED_ARG, 5*1024*1024L, 1*1024*1024L, LONGLONG_MAX, 0, 1024*1024L, 0}, {"innodb_log_files_in_group", OPT_INNODB_LOG_FILES_IN_GROUP, "Number of log files in the log group. InnoDB writes to the files in a circular fashion. Value 3 is recommended here.", (gptr*) &innobase_log_files_in_group, (gptr*) &innobase_log_files_in_group, 0, GET_LONG, REQUIRED_ARG, 2, 2, 100, 0, 1, 0}, {"innodb_mirrored_log_groups", OPT_INNODB_MIRRORED_LOG_GROUPS, "Number of identical copies of log groups we keep for the database. Currently this should be set to 1.", (gptr*) &innobase_mirrored_log_groups, (gptr*) &innobase_mirrored_log_groups, 0, GET_LONG, REQUIRED_ARG, 1, 1, 10, 0, 1, 0}, {"innodb_open_files", OPT_INNODB_OPEN_FILES, "How many files at the maximum InnoDB keeps open at the same time.", (gptr*) &innobase_open_files, (gptr*) &innobase_open_files, 0, GET_LONG, REQUIRED_ARG, 300L, 10L, ~0L, 0, 1L, 0}, {"innodb_sync_spin_loops", OPT_INNODB_SYNC_SPIN_LOOPS, "Count of spin-loop rounds in InnoDB mutexes", (gptr*) &srv_n_spin_wait_rounds, (gptr*) &srv_n_spin_wait_rounds, 0, GET_LONG, REQUIRED_ARG, 20L, 0L, ~0L, 0, 1L, 0}, {"innodb_thread_concurrency", OPT_INNODB_THREAD_CONCURRENCY, "Helps in performance tuning in heavily concurrent environments.", (gptr*) &srv_thread_concurrency, (gptr*) &srv_thread_concurrency, 0, GET_LONG, REQUIRED_ARG, 20, 1, 1000, 0, 1, 0}, {"innodb_commit_concurrency", OPT_INNODB_THREAD_CONCURRENCY, "Helps in performance tuning in heavily concurrent environments.", (gptr*) &srv_commit_concurrency, (gptr*) &srv_commit_concurrency, 0, GET_LONG, REQUIRED_ARG, 0, 0, 1000, 0, 1, 0}, {"innodb_thread_sleep_delay", OPT_INNODB_THREAD_SLEEP_DELAY, "Time of innodb thread sleeping before joining InnoDB queue (usec). Value 0" " disable a sleep", (gptr*) &srv_thread_sleep_delay, (gptr*) &srv_thread_sleep_delay, 0, GET_LONG, REQUIRED_ARG, 10000L, 0L, ~0L, 0, 1L, 0}, #endif /* WITH_INNOBASE_STORAGE_ENGINE */ {"interactive_timeout", OPT_INTERACTIVE_TIMEOUT, "The number of seconds the server waits for activity on an interactive connection before closing it.", (gptr*) &global_system_variables.net_interactive_timeout, (gptr*) &max_system_variables.net_interactive_timeout, 0, GET_ULONG, REQUIRED_ARG, NET_WAIT_TIMEOUT, 1, LONG_TIMEOUT, 0, 1, 0}, {"join_buffer_size", OPT_JOIN_BUFF_SIZE, "The size of the buffer that is used for full joins.", (gptr*) &global_system_variables.join_buff_size, (gptr*) &max_system_variables.join_buff_size, 0, GET_ULONG, REQUIRED_ARG, 128*1024L, IO_SIZE*2+MALLOC_OVERHEAD, ~0L, MALLOC_OVERHEAD, IO_SIZE, 0}, {"key_buffer_size", OPT_KEY_BUFFER_SIZE, "The size of the buffer used for index blocks for MyISAM tables. Increase this to get better index handling (for all reads and multiple writes) to as much as you can afford; 64M on a 256M machine that mainly runs MySQL is quite common.", (gptr*) &dflt_key_cache_var.param_buff_size, (gptr*) 0, 0, (GET_ULL | GET_ASK_ADDR), REQUIRED_ARG, KEY_CACHE_SIZE, MALLOC_OVERHEAD, ~(ulong) 0, MALLOC_OVERHEAD, IO_SIZE, 0}, {"key_cache_age_threshold", OPT_KEY_CACHE_AGE_THRESHOLD, "This characterizes the number of hits a hot block has to be untouched until it is considered aged enough to be downgraded to a warm block. This specifies the percentage ratio of that number of hits to the total number of blocks in key cache", (gptr*) &dflt_key_cache_var.param_age_threshold, (gptr*) 0, 0, (GET_ULONG | GET_ASK_ADDR), REQUIRED_ARG, 300, 100, ~0L, 0, 100, 0}, {"key_cache_block_size", OPT_KEY_CACHE_BLOCK_SIZE, "The default size of key cache blocks", (gptr*) &dflt_key_cache_var.param_block_size, (gptr*) 0, 0, (GET_ULONG | GET_ASK_ADDR), REQUIRED_ARG, KEY_CACHE_BLOCK_SIZE , 512, 1024*16, MALLOC_OVERHEAD, 512, 0}, {"key_cache_division_limit", OPT_KEY_CACHE_DIVISION_LIMIT, "The minimum percentage of warm blocks in key cache", (gptr*) &dflt_key_cache_var.param_division_limit, (gptr*) 0, 0, (GET_ULONG | GET_ASK_ADDR) , REQUIRED_ARG, 100, 1, 100, 0, 1, 0}, {"long_query_time", OPT_LONG_QUERY_TIME, "Log all queries that have taken more than long_query_time seconds to execute to file.", (gptr*) &global_system_variables.long_query_time, (gptr*) &max_system_variables.long_query_time, 0, GET_ULONG, REQUIRED_ARG, 10, 1, LONG_TIMEOUT, 0, 1, 0}, {"lower_case_table_names", OPT_LOWER_CASE_TABLE_NAMES, "If set to 1 table names are stored in lowercase on disk and table names will be case-insensitive. Should be set to 2 if you are using a case insensitive file system", (gptr*) &lower_case_table_names, (gptr*) &lower_case_table_names, 0, GET_UINT, OPT_ARG, #ifdef FN_NO_CASE_SENCE 1 #else 0 #endif , 0, 2, 0, 1, 0}, {"max_allowed_packet", OPT_MAX_ALLOWED_PACKET, "Max packetlength to send/receive from to server.", (gptr*) &global_system_variables.max_allowed_packet, (gptr*) &max_system_variables.max_allowed_packet, 0, GET_ULONG, REQUIRED_ARG, 1024*1024L, 1024, 1024L*1024L*1024L, MALLOC_OVERHEAD, 1024, 0}, {"max_binlog_cache_size", OPT_MAX_BINLOG_CACHE_SIZE, "Can be used to restrict the total size used to cache a multi-transaction query.", (gptr*) &max_binlog_cache_size, (gptr*) &max_binlog_cache_size, 0, GET_ULONG, REQUIRED_ARG, ~0L, IO_SIZE, ~0L, 0, IO_SIZE, 0}, {"max_binlog_size", OPT_MAX_BINLOG_SIZE, "Binary log will be rotated automatically when the size exceeds this \ value. Will also apply to relay logs if max_relay_log_size is 0. \ The minimum value for this variable is 4096.", (gptr*) &max_binlog_size, (gptr*) &max_binlog_size, 0, GET_ULONG, REQUIRED_ARG, 1024*1024L*1024L, IO_SIZE, 1024*1024L*1024L, 0, IO_SIZE, 0}, {"max_connect_errors", OPT_MAX_CONNECT_ERRORS, "If there is more than this number of interrupted connections from a host this host will be blocked from further connections.", (gptr*) &max_connect_errors, (gptr*) &max_connect_errors, 0, GET_ULONG, REQUIRED_ARG, MAX_CONNECT_ERRORS, 1, ~0L, 0, 1, 0}, {"max_connections", OPT_MAX_CONNECTIONS, "The number of simultaneous clients allowed.", (gptr*) &max_connections, (gptr*) &max_connections, 0, GET_ULONG, REQUIRED_ARG, 100, 1, 16384, 0, 1, 0}, {"max_delayed_threads", OPT_MAX_DELAYED_THREADS, "Don't start more than this number of threads to handle INSERT DELAYED statements. If set to zero, which means INSERT DELAYED is not used.", (gptr*) &global_system_variables.max_insert_delayed_threads, (gptr*) &max_system_variables.max_insert_delayed_threads, 0, GET_ULONG, REQUIRED_ARG, 20, 0, 16384, 0, 1, 0}, {"max_error_count", OPT_MAX_ERROR_COUNT, "Max number of errors/warnings to store for a statement.", (gptr*) &global_system_variables.max_error_count, (gptr*) &max_system_variables.max_error_count, 0, GET_ULONG, REQUIRED_ARG, DEFAULT_ERROR_COUNT, 0, 65535, 0, 1, 0}, {"max_heap_table_size", OPT_MAX_HEP_TABLE_SIZE, "Don't allow creation of heap tables bigger than this.", (gptr*) &global_system_variables.max_heap_table_size, (gptr*) &max_system_variables.max_heap_table_size, 0, GET_ULONG, REQUIRED_ARG, 16*1024*1024L, 16384, ~0L, MALLOC_OVERHEAD, 1024, 0}, {"max_join_size", OPT_MAX_JOIN_SIZE, "Joins that are probably going to read more than max_join_size records return an error.", (gptr*) &global_system_variables.max_join_size, (gptr*) &max_system_variables.max_join_size, 0, GET_HA_ROWS, REQUIRED_ARG, ~0L, 1, ~0L, 0, 1, 0}, {"max_length_for_sort_data", OPT_MAX_LENGTH_FOR_SORT_DATA, "Max number of bytes in sorted records.", (gptr*) &global_system_variables.max_length_for_sort_data, (gptr*) &max_system_variables.max_length_for_sort_data, 0, GET_ULONG, REQUIRED_ARG, 1024, 4, 8192*1024L, 0, 1, 0}, {"max_relay_log_size", OPT_MAX_RELAY_LOG_SIZE, "If non-zero: relay log will be rotated automatically when the size exceeds this value; if zero (the default): when the size exceeds max_binlog_size. 0 excepted, the minimum value for this variable is 4096.", (gptr*) &max_relay_log_size, (gptr*) &max_relay_log_size, 0, GET_ULONG, REQUIRED_ARG, 0L, 0L, 1024*1024L*1024L, 0, IO_SIZE, 0}, { "max_seeks_for_key", OPT_MAX_SEEKS_FOR_KEY, "Limit assumed max number of seeks when looking up rows based on a key", (gptr*) &global_system_variables.max_seeks_for_key, (gptr*) &max_system_variables.max_seeks_for_key, 0, GET_ULONG, REQUIRED_ARG, ~0L, 1, ~0L, 0, 1, 0 }, {"max_sort_length", OPT_MAX_SORT_LENGTH, "The number of bytes to use when sorting BLOB or TEXT values (only the first max_sort_length bytes of each value are used; the rest are ignored).", (gptr*) &global_system_variables.max_sort_length, (gptr*) &max_system_variables.max_sort_length, 0, GET_ULONG, REQUIRED_ARG, 1024, 4, 8192*1024L, 0, 1, 0}, {"max_tmp_tables", OPT_MAX_TMP_TABLES, "Maximum number of temporary tables a client can keep open at a time.", (gptr*) &global_system_variables.max_tmp_tables, (gptr*) &max_system_variables.max_tmp_tables, 0, GET_ULONG, REQUIRED_ARG, 32, 1, ~0L, 0, 1, 0}, {"max_user_connections", OPT_MAX_USER_CONNECTIONS, "The maximum number of active connections for a single user (0 = no limit).", (gptr*) &max_user_connections, (gptr*) &max_user_connections, 0, GET_UINT, REQUIRED_ARG, 0, 1, ~0, 0, 1, 0}, {"max_write_lock_count", OPT_MAX_WRITE_LOCK_COUNT, "After this many write locks, allow some read locks to run in between.", (gptr*) &max_write_lock_count, (gptr*) &max_write_lock_count, 0, GET_ULONG, REQUIRED_ARG, ~0L, 1, ~0L, 0, 1, 0}, {"multi_range_count", OPT_MULTI_RANGE_COUNT, "Number of key ranges to request at once.", (gptr*) &global_system_variables.multi_range_count, (gptr*) &max_system_variables.multi_range_count, 0, GET_ULONG, REQUIRED_ARG, 256, 1, ~0L, 0, 1, 0}, {"myisam_block_size", OPT_MYISAM_BLOCK_SIZE, "Block size to be used for MyISAM index pages.", (gptr*) &opt_myisam_block_size, (gptr*) &opt_myisam_block_size, 0, GET_ULONG, REQUIRED_ARG, MI_KEY_BLOCK_LENGTH, MI_MIN_KEY_BLOCK_LENGTH, MI_MAX_KEY_BLOCK_LENGTH, 0, MI_MIN_KEY_BLOCK_LENGTH, 0}, {"myisam_data_pointer_size", OPT_MYISAM_DATA_POINTER_SIZE, "Default pointer size to be used for MyISAM tables.", (gptr*) &myisam_data_pointer_size, (gptr*) &myisam_data_pointer_size, 0, GET_ULONG, REQUIRED_ARG, 6, 2, 7, 0, 1, 0}, {"myisam_max_extra_sort_file_size", OPT_MYISAM_MAX_EXTRA_SORT_FILE_SIZE, "Deprecated option", (gptr*) &global_system_variables.myisam_max_extra_sort_file_size, (gptr*) &max_system_variables.myisam_max_extra_sort_file_size, 0, GET_ULL, REQUIRED_ARG, (ulonglong) MI_MAX_TEMP_LENGTH, 0, (ulonglong) MAX_FILE_SIZE, 0, 1, 0}, {"myisam_max_sort_file_size", OPT_MYISAM_MAX_SORT_FILE_SIZE, "Don't use the fast sort index method to created index if the temporary file would get bigger than this.", (gptr*) &global_system_variables.myisam_max_sort_file_size, (gptr*) &max_system_variables.myisam_max_sort_file_size, 0, GET_ULL, REQUIRED_ARG, (longlong) LONG_MAX, 0, (ulonglong) MAX_FILE_SIZE, 0, 1024*1024, 0}, {"myisam_repair_threads", OPT_MYISAM_REPAIR_THREADS, "Number of threads to use when repairing MyISAM tables. The value of 1 disables parallel repair.", (gptr*) &global_system_variables.myisam_repair_threads, (gptr*) &max_system_variables.myisam_repair_threads, 0, GET_ULONG, REQUIRED_ARG, 1, 1, ~0L, 0, 1, 0}, {"myisam_sort_buffer_size", OPT_MYISAM_SORT_BUFFER_SIZE, "The buffer that is allocated when sorting the index when doing a REPAIR or when creating indexes with CREATE INDEX or ALTER TABLE.", (gptr*) &global_system_variables.myisam_sort_buff_size, (gptr*) &max_system_variables.myisam_sort_buff_size, 0, GET_ULONG, REQUIRED_ARG, 8192*1024, 4, ~0L, 0, 1, 0}, {"myisam_stats_method", OPT_MYISAM_STATS_METHOD, "Specifies how MyISAM index statistics collection code should threat NULLs. " "Possible values of name are \"nulls_unequal\" (default behavior for 4.1/5.0), " "\"nulls_equal\" (emulate 4.0 behavior), and \"nulls_ignored\".", (gptr*) &myisam_stats_method_str, (gptr*) &myisam_stats_method_str, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"net_buffer_length", OPT_NET_BUFFER_LENGTH, "Buffer length for TCP/IP and socket communication.", (gptr*) &global_system_variables.net_buffer_length, (gptr*) &max_system_variables.net_buffer_length, 0, GET_ULONG, REQUIRED_ARG, 16384, 1024, 1024*1024L, 0, 1024, 0}, {"net_read_timeout", OPT_NET_READ_TIMEOUT, "Number of seconds to wait for more data from a connection before aborting the read.", (gptr*) &global_system_variables.net_read_timeout, (gptr*) &max_system_variables.net_read_timeout, 0, GET_ULONG, REQUIRED_ARG, NET_READ_TIMEOUT, 1, LONG_TIMEOUT, 0, 1, 0}, {"net_retry_count", OPT_NET_RETRY_COUNT, "If a read on a communication port is interrupted, retry this many times before giving up.", (gptr*) &global_system_variables.net_retry_count, (gptr*) &max_system_variables.net_retry_count,0, GET_ULONG, REQUIRED_ARG, MYSQLD_NET_RETRY_COUNT, 1, ~0L, 0, 1, 0}, {"net_write_timeout", OPT_NET_WRITE_TIMEOUT, "Number of seconds to wait for a block to be written to a connection before aborting the write.", (gptr*) &global_system_variables.net_write_timeout, (gptr*) &max_system_variables.net_write_timeout, 0, GET_ULONG, REQUIRED_ARG, NET_WRITE_TIMEOUT, 1, LONG_TIMEOUT, 0, 1, 0}, {"open_files_limit", OPT_OPEN_FILES_LIMIT, "If this is not 0, then mysqld will use this value to reserve file descriptors to use with setrlimit(). If this value is 0 then mysqld will reserve max_connections*5 or max_connections + table_cache*2 (whichever is larger) number of files.", (gptr*) &open_files_limit, (gptr*) &open_files_limit, 0, GET_ULONG, REQUIRED_ARG, 0, 0, OS_FILE_LIMIT, 0, 1, 0}, {"optimizer_prune_level", OPT_OPTIMIZER_PRUNE_LEVEL, "Controls the heuristic(s) applied during query optimization to prune less-promising partial plans from the optimizer search space. Meaning: 0 - do not apply any heuristic, thus perform exhaustive search; 1 - prune plans based on number of retrieved rows.", (gptr*) &global_system_variables.optimizer_prune_level, (gptr*) &max_system_variables.optimizer_prune_level, 0, GET_ULONG, OPT_ARG, 1, 0, 1, 0, 1, 0}, {"optimizer_search_depth", OPT_OPTIMIZER_SEARCH_DEPTH, "Maximum depth of search performed by the query optimizer. Values larger than the number of relations in a query result in better query plans, but take longer to compile a query. Smaller values than the number of tables in a relation result in faster optimization, but may produce very bad query plans. If set to 0, the system will automatically pick a reasonable value; if set to MAX_TABLES+2, the optimizer will switch to the original find_best (used for testing/comparison).", (gptr*) &global_system_variables.optimizer_search_depth, (gptr*) &max_system_variables.optimizer_search_depth, 0, GET_ULONG, OPT_ARG, MAX_TABLES+1, 0, MAX_TABLES+2, 0, 1, 0}, {"plugin_dir", OPT_PLUGIN_DIR, "Directory for plugins.", (gptr*) &opt_plugin_dir_ptr, (gptr*) &opt_plugin_dir_ptr, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"preload_buffer_size", OPT_PRELOAD_BUFFER_SIZE, "The size of the buffer that is allocated when preloading indexes", (gptr*) &global_system_variables.preload_buff_size, (gptr*) &max_system_variables.preload_buff_size, 0, GET_ULONG, REQUIRED_ARG, 32*1024L, 1024, 1024*1024*1024L, 0, 1, 0}, {"query_alloc_block_size", OPT_QUERY_ALLOC_BLOCK_SIZE, "Allocation block size for query parsing and execution", (gptr*) &global_system_variables.query_alloc_block_size, (gptr*) &max_system_variables.query_alloc_block_size, 0, GET_ULONG, REQUIRED_ARG, QUERY_ALLOC_BLOCK_SIZE, 1024, ~0L, 0, 1024, 0}, #ifdef HAVE_QUERY_CACHE {"query_cache_limit", OPT_QUERY_CACHE_LIMIT, "Don't cache results that are bigger than this.", (gptr*) &query_cache_limit, (gptr*) &query_cache_limit, 0, GET_ULONG, REQUIRED_ARG, 1024*1024L, 0, (longlong) ULONG_MAX, 0, 1, 0}, {"query_cache_min_res_unit", OPT_QUERY_CACHE_MIN_RES_UNIT, "minimal size of unit in wich space for results is allocated (last unit will be trimed after writing all result data.", (gptr*) &query_cache_min_res_unit, (gptr*) &query_cache_min_res_unit, 0, GET_ULONG, REQUIRED_ARG, QUERY_CACHE_MIN_RESULT_DATA_SIZE, 0, (longlong) ULONG_MAX, 0, 1, 0}, #endif /*HAVE_QUERY_CACHE*/ {"query_cache_size", OPT_QUERY_CACHE_SIZE, "The memory allocated to store results from old queries.", (gptr*) &query_cache_size, (gptr*) &query_cache_size, 0, GET_ULONG, REQUIRED_ARG, 0, 0, (longlong) ULONG_MAX, 0, 1024, 0}, #ifdef HAVE_QUERY_CACHE {"query_cache_type", OPT_QUERY_CACHE_TYPE, "0 = OFF = Don't cache or retrieve results. 1 = ON = Cache all results except SELECT SQL_NO_CACHE ... queries. 2 = DEMAND = Cache only SELECT SQL_CACHE ... queries.", (gptr*) &global_system_variables.query_cache_type, (gptr*) &max_system_variables.query_cache_type, 0, GET_ULONG, REQUIRED_ARG, 1, 0, 2, 0, 1, 0}, {"query_cache_wlock_invalidate", OPT_QUERY_CACHE_WLOCK_INVALIDATE, "Invalidate queries in query cache on LOCK for write", (gptr*) &global_system_variables.query_cache_wlock_invalidate, (gptr*) &max_system_variables.query_cache_wlock_invalidate, 0, GET_BOOL, NO_ARG, 0, 0, 1, 0, 1, 0}, #endif /*HAVE_QUERY_CACHE*/ {"query_prealloc_size", OPT_QUERY_PREALLOC_SIZE, "Persistent buffer for query parsing and execution", (gptr*) &global_system_variables.query_prealloc_size, (gptr*) &max_system_variables.query_prealloc_size, 0, GET_ULONG, REQUIRED_ARG, QUERY_ALLOC_PREALLOC_SIZE, QUERY_ALLOC_PREALLOC_SIZE, ~0L, 0, 1024, 0}, {"range_alloc_block_size", OPT_RANGE_ALLOC_BLOCK_SIZE, "Allocation block size for storing ranges during optimization", (gptr*) &global_system_variables.range_alloc_block_size, (gptr*) &max_system_variables.range_alloc_block_size, 0, GET_ULONG, REQUIRED_ARG, RANGE_ALLOC_BLOCK_SIZE, 4096, ~0L, 0, 1024, 0}, {"read_buffer_size", OPT_RECORD_BUFFER, "Each thread that does a sequential scan allocates a buffer of this size for each table it scans. If you do many sequential scans, you may want to increase this value.", (gptr*) &global_system_variables.read_buff_size, (gptr*) &max_system_variables.read_buff_size,0, GET_ULONG, REQUIRED_ARG, 128*1024L, IO_SIZE*2+MALLOC_OVERHEAD, ~0L, MALLOC_OVERHEAD, IO_SIZE, 0}, {"read_only", OPT_READONLY, "Make all non-temporary tables read-only, with the exception for replication (slave) threads and users with the SUPER privilege", (gptr*) &opt_readonly, (gptr*) &opt_readonly, 0, GET_BOOL, NO_ARG, 0, 0, 1, 0, 1, 0}, {"read_rnd_buffer_size", OPT_RECORD_RND_BUFFER, "When reading rows in sorted order after a sort, the rows are read through this buffer to avoid a disk seeks. If not set, then it's set to the value of record_buffer.", (gptr*) &global_system_variables.read_rnd_buff_size, (gptr*) &max_system_variables.read_rnd_buff_size, 0, GET_ULONG, REQUIRED_ARG, 256*1024L, IO_SIZE*2+MALLOC_OVERHEAD, ~0L, MALLOC_OVERHEAD, IO_SIZE, 0}, {"div_precision_increment", OPT_DIV_PRECINCREMENT, "Precision of the result of '/' operator will be increased on that value.", (gptr*) &global_system_variables.div_precincrement, (gptr*) &max_system_variables.div_precincrement, 0, GET_ULONG, REQUIRED_ARG, 4, 0, DECIMAL_MAX_SCALE, 0, 0, 0}, {"record_buffer", OPT_RECORD_BUFFER, "Alias for read_buffer_size", (gptr*) &global_system_variables.read_buff_size, (gptr*) &max_system_variables.read_buff_size,0, GET_ULONG, REQUIRED_ARG, 128*1024L, IO_SIZE*2+MALLOC_OVERHEAD, ~0L, MALLOC_OVERHEAD, IO_SIZE, 0}, {"max_sp_recursion_depth", OPT_MAX_SP_RECURSION_DEPTH, "Maximum stored procedure recursion depth. (discussed with docs).", (gptr*) &global_system_variables.max_sp_recursion_depth, (gptr*) &max_system_variables.max_sp_recursion_depth, 0, GET_ULONG, OPT_ARG, 0, 0, 255, 0, 1, 0 }, #ifdef HAVE_REPLICATION {"relay_log_purge", OPT_RELAY_LOG_PURGE, "0 = do not purge relay logs. 1 = purge them as soon as they are no more needed.", (gptr*) &relay_log_purge, (gptr*) &relay_log_purge, 0, GET_BOOL, NO_ARG, 1, 0, 1, 0, 1, 0}, {"relay_log_space_limit", OPT_RELAY_LOG_SPACE_LIMIT, "Maximum space to use for all relay logs.", (gptr*) &relay_log_space_limit, (gptr*) &relay_log_space_limit, 0, GET_ULL, REQUIRED_ARG, 0L, 0L, (longlong) ULONG_MAX, 0, 1, 0}, {"slave_compressed_protocol", OPT_SLAVE_COMPRESSED_PROTOCOL, "Use compression on master/slave protocol.", (gptr*) &opt_slave_compressed_protocol, (gptr*) &opt_slave_compressed_protocol, 0, GET_BOOL, NO_ARG, 0, 0, 1, 0, 1, 0}, {"slave_net_timeout", OPT_SLAVE_NET_TIMEOUT, "Number of seconds to wait for more data from a master/slave connection before aborting the read.", (gptr*) &slave_net_timeout, (gptr*) &slave_net_timeout, 0, GET_ULONG, REQUIRED_ARG, SLAVE_NET_TIMEOUT, 1, LONG_TIMEOUT, 0, 1, 0}, {"slave_transaction_retries", OPT_SLAVE_TRANS_RETRIES, "Number of times the slave SQL thread will retry a transaction in case " "it failed with a deadlock or elapsed lock wait timeout, " "before giving up and stopping.", (gptr*) &slave_trans_retries, (gptr*) &slave_trans_retries, 0, GET_ULONG, REQUIRED_ARG, 10L, 0L, (longlong) ULONG_MAX, 0, 1, 0}, #endif /* HAVE_REPLICATION */ {"slow_launch_time", OPT_SLOW_LAUNCH_TIME, "If creating the thread takes longer than this value (in seconds), the Slow_launch_threads counter will be incremented.", (gptr*) &slow_launch_time, (gptr*) &slow_launch_time, 0, GET_ULONG, REQUIRED_ARG, 2L, 0L, LONG_TIMEOUT, 0, 1, 0}, {"sort_buffer_size", OPT_SORT_BUFFER, "Each thread that needs to do a sort allocates a buffer of this size.", (gptr*) &global_system_variables.sortbuff_size, (gptr*) &max_system_variables.sortbuff_size, 0, GET_ULONG, REQUIRED_ARG, MAX_SORT_MEMORY, MIN_SORT_MEMORY+MALLOC_OVERHEAD*2, ~0L, MALLOC_OVERHEAD, 1, 0}, #ifdef WITH_BERKELEY_STORAGE_ENGINE {"sync-bdb-logs", OPT_BDB_SYNC, "Synchronously flush Berkeley DB logs. Enabled by default", (gptr*) &opt_sync_bdb_logs, (gptr*) &opt_sync_bdb_logs, 0, GET_BOOL, NO_ARG, 1, 0, 0, 0, 0, 0}, #endif /* WITH_BERKELEY_STORAGE_ENGINE */ {"sync-binlog", OPT_SYNC_BINLOG, "Synchronously flush binary log to disk after every #th event. " "Use 0 (default) to disable synchronous flushing.", (gptr*) &sync_binlog_period, (gptr*) &sync_binlog_period, 0, GET_ULONG, REQUIRED_ARG, 0, 0, ~0L, 0, 1, 0}, {"sync-frm", OPT_SYNC_FRM, "Sync .frm to disk on create. Enabled by default.", (gptr*) &opt_sync_frm, (gptr*) &opt_sync_frm, 0, GET_BOOL, NO_ARG, 1, 0, 0, 0, 0, 0}, #ifdef HAVE_REPLICATION {"sync-replication", OPT_SYNC_REPLICATION, "Enable synchronous replication.", (gptr*) &global_system_variables.sync_replication, (gptr*) &global_system_variables.sync_replication, 0, GET_ULONG, REQUIRED_ARG, 0, 0, 1, 0, 1, 0}, {"sync-replication-slave-id", OPT_SYNC_REPLICATION_SLAVE_ID, "Synchronous replication is wished for this slave.", (gptr*) &global_system_variables.sync_replication_slave_id, (gptr*) &global_system_variables.sync_replication_slave_id, 0, GET_ULONG, REQUIRED_ARG, 0, 0, ~0L, 0, 1, 0}, {"sync-replication-timeout", OPT_SYNC_REPLICATION_TIMEOUT, "Synchronous replication timeout.", (gptr*) &global_system_variables.sync_replication_timeout, (gptr*) &global_system_variables.sync_replication_timeout, 0, GET_ULONG, REQUIRED_ARG, 10, 0, ~0L, 0, 1, 0}, #endif /* HAVE_REPLICATION */ {"table_cache", OPT_TABLE_OPEN_CACHE, "Deprecated; use --table_open_cache instead.", (gptr*) &table_cache_size, (gptr*) &table_cache_size, 0, GET_ULONG, REQUIRED_ARG, 64, 1, 512*1024L, 0, 1, 0}, {"table_definition_cache", OPT_TABLE_DEF_CACHE, "The number of cached table definitions.", (gptr*) &table_def_size, (gptr*) &table_def_size, 0, GET_ULONG, REQUIRED_ARG, 128, 1, 512*1024L, 0, 1, 0}, {"table_open_cache", OPT_TABLE_OPEN_CACHE, "The number of cached open tables.", (gptr*) &table_cache_size, (gptr*) &table_cache_size, 0, GET_ULONG, REQUIRED_ARG, 64, 1, 512*1024L, 0, 1, 0}, {"table_lock_wait_timeout", OPT_TABLE_LOCK_WAIT_TIMEOUT, "Timeout in seconds to wait for a table level lock before returning an " "error. Used only if the connection has active cursors.", (gptr*) &table_lock_wait_timeout, (gptr*) &table_lock_wait_timeout, 0, GET_ULONG, REQUIRED_ARG, 50, 1, 1024 * 1024 * 1024, 0, 1, 0}, {"thread_cache_size", OPT_THREAD_CACHE_SIZE, "How many threads we should keep in a cache for reuse.", (gptr*) &thread_cache_size, (gptr*) &thread_cache_size, 0, GET_ULONG, REQUIRED_ARG, 0, 0, 16384, 0, 1, 0}, {"thread_concurrency", OPT_THREAD_CONCURRENCY, "Permits the application to give the threads system a hint for the desired number of threads that should be run at the same time.", (gptr*) &concurrency, (gptr*) &concurrency, 0, GET_ULONG, REQUIRED_ARG, DEFAULT_CONCURRENCY, 1, 512, 0, 1, 0}, {"thread_stack", OPT_THREAD_STACK, "The stack size for each thread.", (gptr*) &thread_stack, (gptr*) &thread_stack, 0, GET_ULONG, REQUIRED_ARG,DEFAULT_THREAD_STACK, 1024L*128L, ~0L, 0, 1024, 0}, { "time_format", OPT_TIME_FORMAT, "The TIME format (for future).", (gptr*) &opt_date_time_formats[MYSQL_TIMESTAMP_TIME], (gptr*) &opt_date_time_formats[MYSQL_TIMESTAMP_TIME], 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"tmp_table_size", OPT_TMP_TABLE_SIZE, "If an in-memory temporary table exceeds this size, MySQL will automatically convert it to an on-disk MyISAM table.", (gptr*) &global_system_variables.tmp_table_size, (gptr*) &max_system_variables.tmp_table_size, 0, GET_ULONG, REQUIRED_ARG, 32*1024*1024L, 1024, ~0L, 0, 1, 0}, {"transaction_alloc_block_size", OPT_TRANS_ALLOC_BLOCK_SIZE, "Allocation block size for transactions to be stored in binary log", (gptr*) &global_system_variables.trans_alloc_block_size, (gptr*) &max_system_variables.trans_alloc_block_size, 0, GET_ULONG, REQUIRED_ARG, QUERY_ALLOC_BLOCK_SIZE, 1024, ~0L, 0, 1024, 0}, {"transaction_prealloc_size", OPT_TRANS_PREALLOC_SIZE, "Persistent buffer for transactions to be stored in binary log", (gptr*) &global_system_variables.trans_prealloc_size, (gptr*) &max_system_variables.trans_prealloc_size, 0, GET_ULONG, REQUIRED_ARG, TRANS_ALLOC_PREALLOC_SIZE, 1024, ~0L, 0, 1024, 0}, {"updatable_views_with_limit", OPT_UPDATABLE_VIEWS_WITH_LIMIT, "1 = YES = Don't issue an error message (warning only) if a VIEW without presence of a key of the underlying table is used in queries with a LIMIT clause for updating. 0 = NO = Prohibit update of a VIEW, which does not contain a key of the underlying table and the query uses a LIMIT clause (usually get from GUI tools).", (gptr*) &global_system_variables.updatable_views_with_limit, (gptr*) &max_system_variables.updatable_views_with_limit, 0, GET_ULONG, REQUIRED_ARG, 1, 0, 1, 0, 1, 0}, {"wait_timeout", OPT_WAIT_TIMEOUT, "The number of seconds the server waits for activity on a connection before closing it.", (gptr*) &global_system_variables.net_wait_timeout, (gptr*) &max_system_variables.net_wait_timeout, 0, GET_ULONG, REQUIRED_ARG, NET_WAIT_TIMEOUT, 1, IF_WIN(INT_MAX32/1000, LONG_TIMEOUT), 0, 1, 0}, {0, 0, 0, 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0} }; struct show_var_st status_vars[]= { {"Aborted_clients", (char*) &aborted_threads, SHOW_LONG}, {"Aborted_connects", (char*) &aborted_connects, SHOW_LONG}, {"Binlog_cache_disk_use", (char*) &binlog_cache_disk_use, SHOW_LONG}, {"Binlog_cache_use", (char*) &binlog_cache_use, SHOW_LONG}, {"Bytes_received", (char*) offsetof(STATUS_VAR, bytes_received), SHOW_LONG_STATUS}, {"Bytes_sent", (char*) offsetof(STATUS_VAR, bytes_sent), SHOW_LONG_STATUS}, {"Com_admin_commands", (char*) offsetof(STATUS_VAR, com_other), SHOW_LONG_STATUS}, {"Com_alter_db", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_ALTER_DB]), SHOW_LONG_STATUS}, {"Com_alter_table", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_ALTER_TABLE]), SHOW_LONG_STATUS}, {"Com_analyze", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_ANALYZE]), SHOW_LONG_STATUS}, {"Com_backup_table", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_BACKUP_TABLE]), SHOW_LONG_STATUS}, {"Com_begin", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_BEGIN]), SHOW_LONG_STATUS}, {"Com_change_db", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_CHANGE_DB]), SHOW_LONG_STATUS}, {"Com_change_master", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_CHANGE_MASTER]), SHOW_LONG_STATUS}, {"Com_check", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_CHECK]), SHOW_LONG_STATUS}, {"Com_checksum", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_CHECKSUM]), SHOW_LONG_STATUS}, {"Com_commit", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_COMMIT]), SHOW_LONG_STATUS}, {"Com_create_db", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_CREATE_DB]), SHOW_LONG_STATUS}, {"Com_create_function", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_CREATE_FUNCTION]), SHOW_LONG_STATUS}, {"Com_create_index", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_CREATE_INDEX]), SHOW_LONG_STATUS}, {"Com_create_table", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_CREATE_TABLE]), SHOW_LONG_STATUS}, {"Com_dealloc_sql", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_DEALLOCATE_PREPARE]), SHOW_LONG_STATUS}, {"Com_delete", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_DELETE]), SHOW_LONG_STATUS}, {"Com_delete_multi", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_DELETE_MULTI]), SHOW_LONG_STATUS}, {"Com_do", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_DO]), SHOW_LONG_STATUS}, {"Com_drop_db", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_DROP_DB]), SHOW_LONG_STATUS}, {"Com_drop_function", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_DROP_FUNCTION]), SHOW_LONG_STATUS}, {"Com_drop_index", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_DROP_INDEX]), SHOW_LONG_STATUS}, {"Com_drop_table", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_DROP_TABLE]), SHOW_LONG_STATUS}, {"Com_drop_user", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_DROP_USER]), SHOW_LONG_STATUS}, {"Com_execute_sql", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_EXECUTE]), SHOW_LONG_STATUS}, {"Com_flush", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_FLUSH]), SHOW_LONG_STATUS}, {"Com_grant", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_GRANT]), SHOW_LONG_STATUS}, {"Com_ha_close", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_HA_CLOSE]), SHOW_LONG_STATUS}, {"Com_ha_open", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_HA_OPEN]), SHOW_LONG_STATUS}, {"Com_ha_read", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_HA_READ]), SHOW_LONG_STATUS}, {"Com_help", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_HELP]), SHOW_LONG_STATUS}, {"Com_insert", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_INSERT]), SHOW_LONG_STATUS}, {"Com_insert_select", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_INSERT_SELECT]), SHOW_LONG_STATUS}, {"Com_kill", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_KILL]), SHOW_LONG_STATUS}, {"Com_load", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_LOAD]), SHOW_LONG_STATUS}, {"Com_load_master_data", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_LOAD_MASTER_DATA]), SHOW_LONG_STATUS}, {"Com_load_master_table", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_LOAD_MASTER_TABLE]), SHOW_LONG_STATUS}, {"Com_lock_tables", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_LOCK_TABLES]), SHOW_LONG_STATUS}, {"Com_optimize", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_OPTIMIZE]), SHOW_LONG_STATUS}, {"Com_preload_keys", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_PRELOAD_KEYS]), SHOW_LONG_STATUS}, {"Com_prepare_sql", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_PREPARE]), SHOW_LONG_STATUS}, {"Com_purge", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_PURGE]), SHOW_LONG_STATUS}, {"Com_purge_before_date", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_PURGE_BEFORE]), SHOW_LONG_STATUS}, {"Com_rename_table", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_RENAME_TABLE]), SHOW_LONG_STATUS}, {"Com_repair", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_REPAIR]), SHOW_LONG_STATUS}, {"Com_replace", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_REPLACE]), SHOW_LONG_STATUS}, {"Com_replace_select", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_REPLACE_SELECT]), SHOW_LONG_STATUS}, {"Com_reset", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_RESET]), SHOW_LONG_STATUS}, {"Com_restore_table", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_RESTORE_TABLE]), SHOW_LONG_STATUS}, {"Com_revoke", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_REVOKE]), SHOW_LONG_STATUS}, {"Com_revoke_all", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_REVOKE_ALL]), SHOW_LONG_STATUS}, {"Com_rollback", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_ROLLBACK]), SHOW_LONG_STATUS}, {"Com_savepoint", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SAVEPOINT]), SHOW_LONG_STATUS}, {"Com_select", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SELECT]), SHOW_LONG_STATUS}, {"Com_set_option", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SET_OPTION]), SHOW_LONG_STATUS}, {"Com_show_binlog_events", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_BINLOG_EVENTS]), SHOW_LONG_STATUS}, {"Com_show_binlogs", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_BINLOGS]), SHOW_LONG_STATUS}, {"Com_show_charsets", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_CHARSETS]), SHOW_LONG_STATUS}, {"Com_show_collations", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_COLLATIONS]), SHOW_LONG_STATUS}, {"Com_show_column_types", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_COLUMN_TYPES]), SHOW_LONG_STATUS}, {"Com_show_create_db", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_CREATE_DB]), SHOW_LONG_STATUS}, {"Com_show_create_table", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_CREATE]), SHOW_LONG_STATUS}, {"Com_show_databases", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_DATABASES]), SHOW_LONG_STATUS}, {"Com_show_engine_logs", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_ENGINE_LOGS]), SHOW_LONG_STATUS}, {"Com_show_engine_mutex", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_ENGINE_MUTEX]), SHOW_LONG_STATUS}, {"Com_show_engine_status", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_ENGINE_STATUS]), SHOW_LONG_STATUS}, {"Com_show_errors", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_ERRORS]), SHOW_LONG_STATUS}, {"Com_show_fields", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_FIELDS]), SHOW_LONG_STATUS}, {"Com_show_grants", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_GRANTS]), SHOW_LONG_STATUS}, {"Com_show_keys", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_KEYS]), SHOW_LONG_STATUS}, {"Com_show_master_status", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_MASTER_STAT]), SHOW_LONG_STATUS}, {"Com_show_new_master", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_NEW_MASTER]), SHOW_LONG_STATUS}, {"Com_show_open_tables", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_OPEN_TABLES]), SHOW_LONG_STATUS}, {"Com_show_privileges", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_PRIVILEGES]), SHOW_LONG_STATUS}, {"Com_show_processlist", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_PROCESSLIST]), SHOW_LONG_STATUS}, {"Com_show_slave_hosts", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_SLAVE_HOSTS]), SHOW_LONG_STATUS}, {"Com_show_slave_status", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_SLAVE_STAT]), SHOW_LONG_STATUS}, {"Com_show_status", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_STATUS]), SHOW_LONG_STATUS}, {"Com_show_storage_engines", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_STORAGE_ENGINES]), SHOW_LONG_STATUS}, {"Com_show_tables", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_TABLES]), SHOW_LONG_STATUS}, {"Com_show_triggers", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_TRIGGERS]), SHOW_LONG_STATUS}, {"Com_show_variables", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_VARIABLES]), SHOW_LONG_STATUS}, {"Com_show_warnings", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SHOW_WARNS]), SHOW_LONG_STATUS}, {"Com_slave_start", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SLAVE_START]), SHOW_LONG_STATUS}, {"Com_slave_stop", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_SLAVE_STOP]), SHOW_LONG_STATUS}, {"Com_stmt_close", (char*) offsetof(STATUS_VAR, com_stmt_close), SHOW_LONG_STATUS}, {"Com_stmt_execute", (char*) offsetof(STATUS_VAR, com_stmt_execute), SHOW_LONG_STATUS}, {"Com_stmt_fetch", (char*) offsetof(STATUS_VAR, com_stmt_fetch), SHOW_LONG_STATUS}, {"Com_stmt_prepare", (char*) offsetof(STATUS_VAR, com_stmt_prepare), SHOW_LONG_STATUS}, {"Com_stmt_reset", (char*) offsetof(STATUS_VAR, com_stmt_reset), SHOW_LONG_STATUS}, {"Com_stmt_send_long_data", (char*) offsetof(STATUS_VAR, com_stmt_send_long_data), SHOW_LONG_STATUS}, {"Com_truncate", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_TRUNCATE]), SHOW_LONG_STATUS}, {"Com_unlock_tables", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_UNLOCK_TABLES]), SHOW_LONG_STATUS}, {"Com_update", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_UPDATE]), SHOW_LONG_STATUS}, {"Com_update_multi", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_UPDATE_MULTI]), SHOW_LONG_STATUS}, {"Com_xa_commit", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_XA_COMMIT]),SHOW_LONG_STATUS}, {"Com_xa_end", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_XA_END]),SHOW_LONG_STATUS}, {"Com_xa_prepare", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_XA_PREPARE]),SHOW_LONG_STATUS}, {"Com_xa_recover", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_XA_RECOVER]),SHOW_LONG_STATUS}, {"Com_xa_rollback", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_XA_ROLLBACK]),SHOW_LONG_STATUS}, {"Com_xa_start", (char*) offsetof(STATUS_VAR, com_stat[(uint) SQLCOM_XA_START]),SHOW_LONG_STATUS}, {"Compression", (char*) 0, SHOW_NET_COMPRESSION}, {"Connections", (char*) &thread_id, SHOW_LONG_CONST}, {"Created_tmp_disk_tables", (char*) offsetof(STATUS_VAR, created_tmp_disk_tables), SHOW_LONG_STATUS}, {"Created_tmp_files", (char*) &my_tmp_file_created, SHOW_LONG}, {"Created_tmp_tables", (char*) offsetof(STATUS_VAR, created_tmp_tables), SHOW_LONG_STATUS}, {"Delayed_errors", (char*) &delayed_insert_errors, SHOW_LONG}, {"Delayed_insert_threads", (char*) &delayed_insert_threads, SHOW_LONG_CONST}, {"Delayed_writes", (char*) &delayed_insert_writes, SHOW_LONG}, {"Flush_commands", (char*) &refresh_version, SHOW_LONG_CONST}, {"Handler_commit", (char*) offsetof(STATUS_VAR, ha_commit_count), SHOW_LONG_STATUS}, {"Handler_delete", (char*) offsetof(STATUS_VAR, ha_delete_count), SHOW_LONG_STATUS}, {"Handler_discover", (char*) offsetof(STATUS_VAR, ha_discover_count), SHOW_LONG_STATUS}, {"Handler_prepare", (char*) offsetof(STATUS_VAR, ha_prepare_count), SHOW_LONG_STATUS}, {"Handler_read_first", (char*) offsetof(STATUS_VAR, ha_read_first_count), SHOW_LONG_STATUS}, {"Handler_read_key", (char*) offsetof(STATUS_VAR, ha_read_key_count), SHOW_LONG_STATUS}, {"Handler_read_next", (char*) offsetof(STATUS_VAR, ha_read_next_count), SHOW_LONG_STATUS}, {"Handler_read_prev", (char*) offsetof(STATUS_VAR, ha_read_prev_count), SHOW_LONG_STATUS}, {"Handler_read_rnd", (char*) offsetof(STATUS_VAR, ha_read_rnd_count), SHOW_LONG_STATUS}, {"Handler_read_rnd_next", (char*) offsetof(STATUS_VAR, ha_read_rnd_next_count), SHOW_LONG_STATUS}, {"Handler_rollback", (char*) offsetof(STATUS_VAR, ha_rollback_count), SHOW_LONG_STATUS}, {"Handler_savepoint", (char*) offsetof(STATUS_VAR, ha_savepoint_count), SHOW_LONG_STATUS}, {"Handler_savepoint_rollback",(char*) offsetof(STATUS_VAR, ha_savepoint_rollback_count), SHOW_LONG_STATUS}, {"Handler_update", (char*) offsetof(STATUS_VAR, ha_update_count), SHOW_LONG_STATUS}, {"Handler_write", (char*) offsetof(STATUS_VAR, ha_write_count), SHOW_LONG_STATUS}, #ifdef WITH_INNOBASE_STORAGE_ENGINE {"Innodb_", (char*) &innodb_status_variables, SHOW_VARS}, #endif /* WITH_INNOBASE_STORAGE_ENGINE */ {"Key_blocks_not_flushed", (char*) &dflt_key_cache_var.global_blocks_changed, SHOW_KEY_CACHE_LONG}, {"Key_blocks_unused", (char*) &dflt_key_cache_var.blocks_unused, SHOW_KEY_CACHE_CONST_LONG}, {"Key_blocks_used", (char*) &dflt_key_cache_var.blocks_used, SHOW_KEY_CACHE_CONST_LONG}, {"Key_read_requests", (char*) &dflt_key_cache_var.global_cache_r_requests, SHOW_KEY_CACHE_LONGLONG}, {"Key_reads", (char*) &dflt_key_cache_var.global_cache_read, SHOW_KEY_CACHE_LONGLONG}, {"Key_write_requests", (char*) &dflt_key_cache_var.global_cache_w_requests, SHOW_KEY_CACHE_LONGLONG}, {"Key_writes", (char*) &dflt_key_cache_var.global_cache_write, SHOW_KEY_CACHE_LONGLONG}, {"Last_query_cost", (char*) offsetof(STATUS_VAR, last_query_cost), SHOW_DOUBLE_STATUS}, {"Max_used_connections", (char*) &max_used_connections, SHOW_LONG}, #ifdef WITH_NDBCLUSTER_STORAGE_ENGINE {"Ndb_", (char*) &ndb_status_variables, SHOW_VARS}, #endif /* WITH_NDBCLUSTER_STORAGE_ENGINE */ {"Not_flushed_delayed_rows", (char*) &delayed_rows_in_use, SHOW_LONG_CONST}, {"Open_files", (char*) &my_file_opened, SHOW_LONG_CONST}, {"Open_streams", (char*) &my_stream_opened, SHOW_LONG_CONST}, {"Open_table_definitions", (char*) 0, SHOW_TABLE_DEFINITIONS}, {"Open_tables", (char*) 0, SHOW_OPEN_TABLES}, {"Opened_tables", (char*) offsetof(STATUS_VAR, opened_tables), SHOW_LONG_STATUS}, #ifdef HAVE_QUERY_CACHE {"Qcache_free_blocks", (char*) &query_cache.free_memory_blocks, SHOW_LONG_CONST}, {"Qcache_free_memory", (char*) &query_cache.free_memory, SHOW_LONG_CONST}, {"Qcache_hits", (char*) &query_cache.hits, SHOW_LONG}, {"Qcache_inserts", (char*) &query_cache.inserts, SHOW_LONG}, {"Qcache_lowmem_prunes", (char*) &query_cache.lowmem_prunes, SHOW_LONG}, {"Qcache_not_cached", (char*) &query_cache.refused, SHOW_LONG}, {"Qcache_queries_in_cache", (char*) &query_cache.queries_in_cache, SHOW_LONG_CONST}, {"Qcache_total_blocks", (char*) &query_cache.total_blocks, SHOW_LONG_CONST}, #endif /*HAVE_QUERY_CACHE*/ {"Questions", (char*) 0, SHOW_QUESTION}, {"Rpl_status", (char*) 0, SHOW_RPL_STATUS}, {"Select_full_join", (char*) offsetof(STATUS_VAR, select_full_join_count), SHOW_LONG_STATUS}, {"Select_full_range_join", (char*) offsetof(STATUS_VAR, select_full_range_join_count), SHOW_LONG_STATUS}, {"Select_range", (char*) offsetof(STATUS_VAR, select_range_count), SHOW_LONG_STATUS}, {"Select_range_check", (char*) offsetof(STATUS_VAR, select_range_check_count), SHOW_LONG_STATUS}, {"Select_scan", (char*) offsetof(STATUS_VAR, select_scan_count), SHOW_LONG_STATUS}, {"Slave_open_temp_tables", (char*) &slave_open_temp_tables, SHOW_LONG}, {"Slave_retried_transactions",(char*) 0, SHOW_SLAVE_RETRIED_TRANS}, {"Slave_running", (char*) 0, SHOW_SLAVE_RUNNING}, {"Slow_launch_threads", (char*) &slow_launch_threads, SHOW_LONG}, {"Slow_queries", (char*) offsetof(STATUS_VAR, long_query_count), SHOW_LONG_STATUS}, {"Sort_merge_passes", (char*) offsetof(STATUS_VAR, filesort_merge_passes), SHOW_LONG_STATUS}, {"Sort_range", (char*) offsetof(STATUS_VAR, filesort_range_count), SHOW_LONG_STATUS}, {"Sort_rows", (char*) offsetof(STATUS_VAR, filesort_rows), SHOW_LONG_STATUS}, {"Sort_scan", (char*) offsetof(STATUS_VAR, filesort_scan_count), SHOW_LONG_STATUS}, #ifdef HAVE_OPENSSL {"Ssl_accept_renegotiates", (char*) 0, SHOW_SSL_CTX_SESS_ACCEPT_RENEGOTIATE}, {"Ssl_accepts", (char*) 0, SHOW_SSL_CTX_SESS_ACCEPT}, {"Ssl_callback_cache_hits", (char*) 0, SHOW_SSL_CTX_SESS_CB_HITS}, {"Ssl_cipher", (char*) 0, SHOW_SSL_GET_CIPHER}, {"Ssl_cipher_list", (char*) 0, SHOW_SSL_GET_CIPHER_LIST}, {"Ssl_client_connects", (char*) 0, SHOW_SSL_CTX_SESS_CONNECT}, {"Ssl_connect_renegotiates", (char*) 0, SHOW_SSL_CTX_SESS_CONNECT_RENEGOTIATE}, {"Ssl_ctx_verify_depth", (char*) 0, SHOW_SSL_CTX_GET_VERIFY_DEPTH}, {"Ssl_ctx_verify_mode", (char*) 0, SHOW_SSL_CTX_GET_VERIFY_MODE}, {"Ssl_default_timeout", (char*) 0, SHOW_SSL_GET_DEFAULT_TIMEOUT}, {"Ssl_finished_accepts", (char*) 0, SHOW_SSL_CTX_SESS_ACCEPT_GOOD}, {"Ssl_finished_connects", (char*) 0, SHOW_SSL_CTX_SESS_CONNECT_GOOD}, {"Ssl_session_cache_hits", (char*) 0, SHOW_SSL_CTX_SESS_HITS}, {"Ssl_session_cache_misses", (char*) 0, SHOW_SSL_CTX_SESS_MISSES}, {"Ssl_session_cache_mode", (char*) 0, SHOW_SSL_CTX_GET_SESSION_CACHE_MODE}, {"Ssl_session_cache_overflows", (char*) 0, SHOW_SSL_CTX_SESS_CACHE_FULL}, {"Ssl_session_cache_size", (char*) 0, SHOW_SSL_CTX_SESS_GET_CACHE_SIZE}, {"Ssl_session_cache_timeouts", (char*) 0, SHOW_SSL_CTX_SESS_TIMEOUTS}, {"Ssl_sessions_reused", (char*) 0, SHOW_SSL_SESSION_REUSED}, {"Ssl_used_session_cache_entries",(char*) 0, SHOW_SSL_CTX_SESS_NUMBER}, {"Ssl_verify_depth", (char*) 0, SHOW_SSL_GET_VERIFY_DEPTH}, {"Ssl_verify_mode", (char*) 0, SHOW_SSL_GET_VERIFY_MODE}, {"Ssl_version", (char*) 0, SHOW_SSL_GET_VERSION}, #endif /* HAVE_OPENSSL */ {"Table_locks_immediate", (char*) &locks_immediate, SHOW_LONG}, {"Table_locks_waited", (char*) &locks_waited, SHOW_LONG}, #ifdef HAVE_MMAP {"Tc_log_max_pages_used", (char*) &tc_log_max_pages_used, SHOW_LONG}, {"Tc_log_page_size", (char*) &tc_log_page_size, SHOW_LONG}, {"Tc_log_page_waits", (char*) &tc_log_page_waits, SHOW_LONG}, #endif {"Threads_cached", (char*) &cached_thread_count, SHOW_LONG_CONST}, {"Threads_connected", (char*) &thread_count, SHOW_INT_CONST}, {"Threads_created", (char*) &thread_created, SHOW_LONG_CONST}, {"Threads_running", (char*) &thread_running, SHOW_INT_CONST}, {"Uptime", (char*) 0, SHOW_STARTTIME}, {NullS, NullS, SHOW_LONG} }; static void print_version(void) { set_server_version(); printf("%s Ver %s for %s on %s (%s)\n",my_progname, server_version,SYSTEM_TYPE,MACHINE_TYPE, MYSQL_COMPILATION_COMMENT); } static void usage(void) { if (!(default_charset_info= get_charset_by_csname(default_character_set_name, MY_CS_PRIMARY, MYF(MY_WME)))) exit(1); if (!default_collation_name) default_collation_name= (char*) default_charset_info->name; print_version(); puts("\ Copyright (C) 2000 MySQL AB, by Monty and others\n\ This software comes with ABSOLUTELY NO WARRANTY. This is free software,\n\ and you are welcome to modify and redistribute it under the GPL license\n\n\ Starts the MySQL database server\n"); printf("Usage: %s [OPTIONS]\n", my_progname); if (!opt_verbose) puts("\nFor more help options (several pages), use mysqld --verbose --help\n"); else { #ifdef __WIN__ puts("NT and Win32 specific options:\n\ --install Install the default service (NT)\n\ --install-manual Install the default service started manually (NT)\n\ --install service_name Install an optional service (NT)\n\ --install-manual service_name Install an optional service started manually (NT)\n\ --remove Remove the default service from the service list (NT)\n\ --remove service_name Remove the service_name from the service list (NT)\n\ --enable-named-pipe Only to be used for the default server (NT)\n\ --standalone Dummy option to start as a standalone server (NT)\ "); puts(""); #endif print_defaults(MYSQL_CONFIG_NAME,load_default_groups); puts(""); fix_paths(); set_ports(); my_print_help(my_long_options); my_print_variables(my_long_options); puts("\n\ To see what values a running MySQL server is using, type\n\ 'mysqladmin variables' instead of 'mysqld --verbose --help'.\n"); } } /* Initialize all MySQL global variables to default values SYNOPSIS mysql_init_variables() NOTES The reason to set a lot of global variables to zero is to allow one to restart the embedded server with a clean environment It's also needed on some exotic platforms where global variables are not set to 0 when a program starts. We don't need to set numeric variables refered to in my_long_options as these are initialized by my_getopt. */ static void mysql_init_variables(void) { /* Things reset to zero */ opt_skip_slave_start= opt_reckless_slave = 0; mysql_home[0]= pidfile_name[0]= log_error_file[0]= 0; opt_log= opt_update_log= opt_slow_log= 0; opt_bin_log= 0; opt_disable_networking= opt_skip_show_db=0; opt_logname= opt_update_logname= opt_binlog_index_name= opt_slow_logname= 0; opt_tc_log_file= (char *)"tc.log"; // no hostname in tc_log file name ! opt_secure_auth= 0; opt_bootstrap= opt_myisam_log= 0; mqh_used= 0; segfaulted= kill_in_progress= 0; cleanup_done= 0; defaults_argv= 0; server_id_supplied= 0; test_flags= select_errors= dropping_tables= ha_open_options=0; thread_count= thread_running= kill_cached_threads= wake_thread=0; slave_open_temp_tables= 0; cached_thread_count= 0; opt_endinfo= using_udf_functions= 0; opt_using_transactions= using_update_log= 0; abort_loop= select_thread_in_use= signal_thread_in_use= 0; ready_to_exit= shutdown_in_progress= grant_option= 0; aborted_threads= aborted_connects= 0; delayed_insert_threads= delayed_insert_writes= delayed_rows_in_use= 0; delayed_insert_errors= thread_created= 0; specialflag= 0; binlog_cache_use= binlog_cache_disk_use= 0; max_used_connections= slow_launch_threads = 0; mysqld_user= mysqld_chroot= opt_init_file= opt_bin_logname = 0; errmesg= 0; mysqld_unix_port= opt_mysql_tmpdir= my_bind_addr_str= NullS; bzero((gptr) &mysql_tmpdir_list, sizeof(mysql_tmpdir_list)); bzero((char *) &global_status_var, sizeof(global_status_var)); opt_large_pages= 0; key_map_full.set_all(); /* Character sets */ system_charset_info= &my_charset_utf8_general_ci; files_charset_info= &my_charset_utf8_general_ci; national_charset_info= &my_charset_utf8_general_ci; table_alias_charset= &my_charset_bin; opt_date_time_formats[0]= opt_date_time_formats[1]= opt_date_time_formats[2]= 0; /* Things with default values that are not zero */ delay_key_write_options= (uint) DELAY_KEY_WRITE_ON; opt_specialflag= SPECIAL_ENGLISH; unix_sock= ip_sock= INVALID_SOCKET; mysql_home_ptr= mysql_home; pidfile_name_ptr= pidfile_name; log_error_file_ptr= log_error_file; language_ptr= language; mysql_data_home= mysql_real_data_home; thd_startup_options= (OPTION_UPDATE_LOG | OPTION_AUTO_IS_NULL | OPTION_BIN_LOG | OPTION_QUOTE_SHOW_CREATE | OPTION_SQL_NOTES); protocol_version= PROTOCOL_VERSION; what_to_log= ~ (1L << (uint) COM_TIME); refresh_version= flush_version= 1L; /* Increments on each reload */ query_id= thread_id= 1L; strmov(server_version, MYSQL_SERVER_VERSION); myisam_recover_options_str= sql_mode_str= "OFF"; myisam_stats_method_str= "nulls_unequal"; my_bind_addr = htonl(INADDR_ANY); threads.empty(); thread_cache.empty(); key_caches.empty(); if (!(dflt_key_cache= get_or_create_key_cache(default_key_cache_base.str, default_key_cache_base.length))) exit(1); multi_keycache_init(); /* set key_cache_hash.default_value = dflt_key_cache */ /* Set directory paths */ strmake(language, LANGUAGE, sizeof(language)-1); strmake(mysql_real_data_home, get_relative_path(DATADIR), sizeof(mysql_real_data_home)-1); mysql_data_home_buff[0]=FN_CURLIB; // all paths are relative from here mysql_data_home_buff[1]=0; /* Replication parameters */ master_user= (char*) "test"; master_password= master_host= 0; master_info_file= (char*) "master.info", relay_log_info_file= (char*) "relay-log.info"; master_ssl_key= master_ssl_cert= master_ssl_ca= master_ssl_capath= master_ssl_cipher= 0; report_user= report_password = report_host= 0; /* TO BE DELETED */ opt_relay_logname= opt_relaylog_index_name= 0; /* Variables in libraries */ charsets_dir= 0; default_character_set_name= (char*) MYSQL_DEFAULT_CHARSET_NAME; default_collation_name= (char*) MYSQL_DEFAULT_COLLATION_NAME; sys_charset_system.value= (char*) system_charset_info->csname; /* Set default values for some option variables */ global_system_variables.table_type= DB_TYPE_MYISAM; global_system_variables.tx_isolation= ISO_REPEATABLE_READ; global_system_variables.select_limit= (ulonglong) HA_POS_ERROR; max_system_variables.select_limit= (ulonglong) HA_POS_ERROR; global_system_variables.max_join_size= (ulonglong) HA_POS_ERROR; max_system_variables.max_join_size= (ulonglong) HA_POS_ERROR; global_system_variables.old_passwords= 0; global_system_variables.old_alter_table= 0; /* Default behavior for 4.1 and 5.0 is to treat NULL values as unequal when collecting index statistics for MyISAM tables. */ global_system_variables.myisam_stats_method= MI_STATS_METHOD_NULLS_NOT_EQUAL; /* Variables that depends on compile options */ #ifndef DBUG_OFF default_dbug_option=IF_WIN("d:t:i:O,\\mysqld.trace", "d:t:i:o,/tmp/mysqld.trace"); #endif opt_error_log= IF_WIN(1,0); #ifdef WITH_NDBCLUSTER_STORAGE_ENGINE have_ndbcluster=SHOW_OPTION_DISABLED; global_system_variables.ndb_index_stat_enable=TRUE; max_system_variables.ndb_index_stat_enable=TRUE; global_system_variables.ndb_index_stat_cache_entries=32; max_system_variables.ndb_index_stat_cache_entries=~0L; global_system_variables.ndb_index_stat_update_freq=20; max_system_variables.ndb_index_stat_update_freq=~0L; #else have_ndbcluster=SHOW_OPTION_NO; #endif #ifdef USE_RAID have_raid=SHOW_OPTION_YES; #else have_raid=SHOW_OPTION_NO; #endif #ifdef HAVE_OPENSSL have_openssl=SHOW_OPTION_YES; #else have_openssl=SHOW_OPTION_NO; #endif #if !defined(HAVE_REALPATH) || defined(HAVE_BROKEN_REALPATH) have_symlink=SHOW_OPTION_NO; #else have_symlink=SHOW_OPTION_YES; #endif #ifdef HAVE_QUERY_CACHE have_query_cache=SHOW_OPTION_YES; #else have_query_cache=SHOW_OPTION_NO; #endif #ifdef HAVE_SPATIAL have_geometry=SHOW_OPTION_YES; #else have_geometry=SHOW_OPTION_NO; #endif #ifdef HAVE_RTREE_KEYS have_rtree_keys=SHOW_OPTION_YES; #else have_rtree_keys=SHOW_OPTION_NO; #endif #ifdef HAVE_CRYPT have_crypt=SHOW_OPTION_YES; #else have_crypt=SHOW_OPTION_NO; #endif #ifdef HAVE_COMPRESS have_compress= SHOW_OPTION_YES; #else have_compress= SHOW_OPTION_NO; #endif #ifdef HAVE_LIBWRAP libwrapName= NullS; #endif #ifdef HAVE_OPENSSL des_key_file = 0; ssl_acceptor_fd= 0; #endif #ifdef HAVE_SMEM shared_memory_base_name= default_shared_memory_base_name; #endif #if !defined(my_pthread_setprio) && !defined(HAVE_PTHREAD_SETSCHEDPARAM) opt_specialflag |= SPECIAL_NO_PRIOR; #endif #if defined(__WIN__) || defined(__NETWARE__) /* Allow Win32 and NetWare users to move MySQL anywhere */ { char prg_dev[LIBLEN]; my_path(prg_dev,my_progname,"mysql/bin"); strcat(prg_dev,"/../"); // Remove 'bin' to get base dir cleanup_dirname(mysql_home,prg_dev); } #else const char *tmpenv; if (!(tmpenv = getenv("MY_BASEDIR_VERSION"))) tmpenv = DEFAULT_MYSQL_HOME; (void) strmake(mysql_home, tmpenv, sizeof(mysql_home)-1); #endif } static my_bool get_one_option(int optid, const struct my_option *opt __attribute__((unused)), char *argument) { switch(optid) { case '#': #ifndef DBUG_OFF DBUG_PUSH(argument ? argument : default_dbug_option); #endif opt_endinfo=1; /* unireg: memory allocation */ break; case 'a': global_system_variables.sql_mode= fix_sql_mode(MODE_ANSI); global_system_variables.tx_isolation= ISO_SERIALIZABLE; break; case 'b': strmake(mysql_home,argument,sizeof(mysql_home)-1); break; case 'C': default_collation_name= 0; break; case 'l': opt_log=1; break; case 'h': strmake(mysql_real_data_home,argument, sizeof(mysql_real_data_home)-1); /* Correct pointer set by my_getopt (for embedded library) */ mysql_data_home= mysql_real_data_home; break; case 'u': if (!mysqld_user || !strcmp(mysqld_user, argument)) mysqld_user= argument; else sql_print_warning("Ignoring user change to '%s' because the user was set to '%s' earlier on the command line\n", argument, mysqld_user); break; case 'L': strmake(language, argument, sizeof(language)-1); break; #ifdef HAVE_REPLICATION case OPT_SLAVE_SKIP_ERRORS: init_slave_skip_errors(argument); break; #endif case OPT_SAFEMALLOC_MEM_LIMIT: #if !defined(DBUG_OFF) && defined(SAFEMALLOC) sf_malloc_mem_limit = atoi(argument); #endif break; #include case 'V': print_version(); exit(0); case 'W': if (!argument) global_system_variables.log_warnings++; else if (argument == disabled_my_option) global_system_variables.log_warnings= 0L; else global_system_variables.log_warnings= atoi(argument); break; case 'T': test_flags= argument ? (uint) atoi(argument) : 0; test_flags&= ~TEST_NO_THREADS; opt_endinfo=1; break; case (int) OPT_BIG_TABLES: thd_startup_options|=OPTION_BIG_TABLES; break; case (int) OPT_ISAM_LOG: opt_myisam_log=1; break; case (int) OPT_UPDATE_LOG: opt_update_log=1; break; case (int) OPT_BIN_LOG: opt_bin_log= test(argument != disabled_my_option); break; case (int) OPT_ERROR_LOG_FILE: opt_error_log= 1; break; #ifdef HAVE_REPLICATION case (int) OPT_INIT_RPL_ROLE: { int role; if ((role=find_type(argument, &rpl_role_typelib, 2)) <= 0) { fprintf(stderr, "Unknown replication role: %s\n", argument); exit(1); } rpl_status = (role == 1) ? RPL_AUTH_MASTER : RPL_IDLE_SLAVE; break; } case (int)OPT_REPLICATE_IGNORE_DB: { rpl_filter->add_ignore_db(argument); break; } case (int)OPT_REPLICATE_DO_DB: { rpl_filter->add_do_db(argument); break; } case (int)OPT_REPLICATE_REWRITE_DB: { char* key = argument,*p, *val; if (!(p= strstr(argument, "->"))) { fprintf(stderr, "Bad syntax in replicate-rewrite-db - missing '->'!\n"); exit(1); } val= p--; while (my_isspace(mysqld_charset, *p) && p > argument) *p-- = 0; if (p == argument) { fprintf(stderr, "Bad syntax in replicate-rewrite-db - empty FROM db!\n"); exit(1); } *val= 0; val+= 2; while (*val && my_isspace(mysqld_charset, *val)) *val++; if (!*val) { fprintf(stderr, "Bad syntax in replicate-rewrite-db - empty TO db!\n"); exit(1); } rpl_filter->add_db_rewrite(key, val); break; } case (int)OPT_BINLOG_IGNORE_DB: { binlog_filter->add_ignore_db(argument); break; } case (int)OPT_BINLOG_DO_DB: { binlog_filter->add_do_db(argument); break; } case (int)OPT_REPLICATE_DO_TABLE: { if (rpl_filter->add_do_table(argument)) { fprintf(stderr, "Could not add do table rule '%s'!\n", argument); exit(1); } break; } case (int)OPT_REPLICATE_WILD_DO_TABLE: { if (rpl_filter->add_wild_do_table(argument)) { fprintf(stderr, "Could not add do table rule '%s'!\n", argument); exit(1); } break; } case (int)OPT_REPLICATE_WILD_IGNORE_TABLE: { if (rpl_filter->add_wild_ignore_table(argument)) { fprintf(stderr, "Could not add ignore table rule '%s'!\n", argument); exit(1); } break; } case (int)OPT_REPLICATE_IGNORE_TABLE: { if (rpl_filter->add_ignore_table(argument)) { fprintf(stderr, "Could not add ignore table rule '%s'!\n", argument); exit(1); } break; } #endif /* HAVE_REPLICATION */ case (int) OPT_SLOW_QUERY_LOG: opt_slow_log=1; break; case (int) OPT_SKIP_NEW: opt_specialflag|= SPECIAL_NO_NEW_FUNC; delay_key_write_options= (uint) DELAY_KEY_WRITE_NONE; myisam_concurrent_insert=0; myisam_recover_options= HA_RECOVER_NONE; sp_automatic_privileges=0; my_use_symdir=0; ha_open_options&= ~(HA_OPEN_ABORT_IF_CRASHED | HA_OPEN_DELAY_KEY_WRITE); #ifdef HAVE_QUERY_CACHE query_cache_size=0; #endif break; case (int) OPT_SAFE: opt_specialflag|= SPECIAL_SAFE_MODE; delay_key_write_options= (uint) DELAY_KEY_WRITE_NONE; myisam_recover_options= HA_RECOVER_DEFAULT; ha_open_options&= ~(HA_OPEN_DELAY_KEY_WRITE); break; case (int) OPT_SKIP_PRIOR: opt_specialflag|= SPECIAL_NO_PRIOR; break; case (int) OPT_SKIP_LOCK: opt_external_locking=0; break; case (int) OPT_SKIP_HOST_CACHE: opt_specialflag|= SPECIAL_NO_HOST_CACHE; break; case (int) OPT_SKIP_RESOLVE: opt_specialflag|=SPECIAL_NO_RESOLVE; break; case (int) OPT_SKIP_NETWORKING: #if defined(__NETWARE__) sql_perror("Can't start server: skip-networking option is currently not supported on NetWare"); exit(1); #endif opt_disable_networking=1; mysqld_port=0; break; case (int) OPT_SKIP_SHOW_DB: opt_skip_show_db=1; opt_specialflag|=SPECIAL_SKIP_SHOW_DB; break; #ifdef ONE_THREAD case (int) OPT_ONE_THREAD: test_flags |= TEST_NO_THREADS; #endif break; case (int) OPT_WANT_CORE: test_flags |= TEST_CORE_ON_SIGNAL; break; case (int) OPT_SKIP_STACK_TRACE: test_flags|=TEST_NO_STACKTRACE; break; case (int) OPT_SKIP_SYMLINKS: my_use_symdir=0; break; case (int) OPT_BIND_ADDRESS: if ((my_bind_addr= (ulong) inet_addr(argument)) == INADDR_NONE) { struct hostent *ent; if (argument[0]) ent=gethostbyname(argument); else { char myhostname[255]; if (gethostname(myhostname,sizeof(myhostname)) < 0) { sql_perror("Can't start server: cannot get my own hostname!"); exit(1); } ent=gethostbyname(myhostname); } if (!ent) { sql_perror("Can't start server: cannot resolve hostname!"); exit(1); } my_bind_addr = (ulong) ((in_addr*)ent->h_addr_list[0])->s_addr; } break; case (int) OPT_PID_FILE: strmake(pidfile_name, argument, sizeof(pidfile_name)-1); break; #ifdef __WIN__ case (int) OPT_STANDALONE: /* Dummy option for NT */ break; #endif case OPT_CONSOLE: if (opt_console) opt_error_log= 0; // Force logs to stdout break; case (int) OPT_FLUSH: myisam_flush=1; flush_time=0; // No auto flush break; case OPT_LOW_PRIORITY_UPDATES: thr_upgraded_concurrent_insert_lock= TL_WRITE_LOW_PRIORITY; global_system_variables.low_priority_updates=1; break; case OPT_BOOTSTRAP: opt_noacl=opt_bootstrap=1; break; case OPT_STORAGE_ENGINE: { if ((enum db_type)((global_system_variables.table_type= ha_resolve_by_name(argument, strlen(argument)))) == DB_TYPE_UNKNOWN) { fprintf(stderr,"Unknown/unsupported table type: %s\n",argument); exit(1); } break; } case OPT_SERVER_ID: server_id_supplied = 1; break; case OPT_DELAY_KEY_WRITE_ALL: if (argument != disabled_my_option) argument= (char*) "ALL"; /* Fall through */ case OPT_DELAY_KEY_WRITE: if (argument == disabled_my_option) delay_key_write_options= (uint) DELAY_KEY_WRITE_NONE; else if (! argument) delay_key_write_options= (uint) DELAY_KEY_WRITE_ON; else { int type; if ((type=find_type(argument, &delay_key_write_typelib, 2)) <= 0) { fprintf(stderr,"Unknown delay_key_write type: %s\n",argument); exit(1); } delay_key_write_options= (uint) type-1; } break; case OPT_CHARSETS_DIR: strmake(mysql_charsets_dir, argument, sizeof(mysql_charsets_dir)-1); charsets_dir = mysql_charsets_dir; break; case OPT_TX_ISOLATION: { int type; if ((type=find_type(argument, &tx_isolation_typelib, 2)) <= 0) { fprintf(stderr,"Unknown transaction isolation type: %s\n",argument); exit(1); } global_system_variables.tx_isolation= (type-1); break; } #ifdef WITH_BERKELEY_STORAGE_ENGINE case OPT_BDB_NOSYNC: /* Deprecated option */ opt_sync_bdb_logs= 0; /* Fall through */ case OPT_BDB_SYNC: if (!opt_sync_bdb_logs) berkeley_env_flags|= bdb_DB_TXN_NOSYNC; else berkeley_env_flags&= ~bdb_DB_TXN_NOSYNC; break; case OPT_BDB_NO_RECOVER: berkeley_init_flags&= ~(bdb_DB_RECOVER); break; case OPT_BDB_LOCK: { int type; if ((type=find_type(argument, &berkeley_lock_typelib, 2)) > 0) berkeley_lock_type=berkeley_lock_types[type-1]; else { int err; char *end; uint length= strlen(argument); long value= my_strntol(&my_charset_latin1, argument, length, 10, &end, &err); if (end == argument+length) berkeley_lock_scan_time= value; else { fprintf(stderr,"Unknown lock type: %s\n",argument); exit(1); } } break; } case OPT_BDB_SHARED: berkeley_init_flags&= ~(bdb_DB_PRIVATE); berkeley_shared_data= 1; break; #endif /* WITH_BERKELEY_STORAGE_ENGINE */ case OPT_BDB: #ifdef WITH_BERKELEY_STORAGE_ENGINE if (opt_bdb) have_berkeley_db= SHOW_OPTION_YES; else have_berkeley_db= SHOW_OPTION_DISABLED; #endif break; case OPT_NDBCLUSTER: #ifdef WITH_NDBCLUSTER_STORAGE_ENGINE if (opt_ndbcluster) have_ndbcluster= SHOW_OPTION_YES; else have_ndbcluster= SHOW_OPTION_DISABLED; #endif break; #ifdef WITH_NDBCLUSTER_STORAGE_ENGINE case OPT_NDB_MGMD: case OPT_NDB_NODEID: { int len= my_snprintf(opt_ndb_constrbuf+opt_ndb_constrbuf_len, sizeof(opt_ndb_constrbuf)-opt_ndb_constrbuf_len, "%s%s%s",opt_ndb_constrbuf_len > 0 ? ",":"", optid == OPT_NDB_NODEID ? "nodeid=" : "", argument); opt_ndb_constrbuf_len+= len; } /* fall through to add the connectstring to the end * and set opt_ndbcluster_connectstring */ case OPT_NDB_CONNECTSTRING: if (opt_ndb_connectstring && opt_ndb_connectstring[0]) my_snprintf(opt_ndb_constrbuf+opt_ndb_constrbuf_len, sizeof(opt_ndb_constrbuf)-opt_ndb_constrbuf_len, "%s%s", opt_ndb_constrbuf_len > 0 ? ",":"", opt_ndb_connectstring); else opt_ndb_constrbuf[opt_ndb_constrbuf_len]= 0; opt_ndbcluster_connectstring= opt_ndb_constrbuf; break; case OPT_NDB_DISTRIBUTION: int id; if ((id= find_type(argument, &ndb_distribution_typelib, 2)) <= 0) { fprintf(stderr, "Unknown ndb distribution type: '%s' " "(should be '%s' or '%s')\n", argument, ndb_distribution_names[ND_KEYHASH], ndb_distribution_names[ND_LINHASH]); exit(1); } opt_ndb_distribution_id= (enum ndb_distribution)(id-1); break; #endif case OPT_INNODB: #ifdef WITH_INNOBASE_STORAGE_ENGINE if (opt_innodb) have_innodb= SHOW_OPTION_YES; else have_innodb= SHOW_OPTION_DISABLED; #endif break; case OPT_INNODB_DATA_FILE_PATH: #ifdef WITH_INNOBASE_STORAGE_ENGINE innobase_data_file_path= argument; #endif break; #ifdef WITH_INNOBASE_STORAGE_ENGINE case OPT_INNODB_LOG_ARCHIVE: innobase_log_archive= argument ? test(atoi(argument)) : 1; break; #endif /* WITH_INNOBASE_STORAGE_ENGINE */ case OPT_MYISAM_RECOVER: { if (!argument || !argument[0]) { myisam_recover_options= HA_RECOVER_DEFAULT; myisam_recover_options_str= myisam_recover_typelib.type_names[0]; } else { myisam_recover_options_str=argument; if ((myisam_recover_options= find_bit_type(argument, &myisam_recover_typelib)) == ~(ulong) 0) { fprintf(stderr, "Unknown option to myisam-recover: %s\n",argument); exit(1); } } ha_open_options|=HA_OPEN_ABORT_IF_CRASHED; break; } case OPT_CONCURRENT_INSERT: /* The following code is mainly here to emulate old behavior */ if (!argument) /* --concurrent-insert */ myisam_concurrent_insert= 1; else if (argument == disabled_my_option) myisam_concurrent_insert= 0; /* --skip-concurrent-insert */ break; case OPT_TC_HEURISTIC_RECOVER: { if ((tc_heuristic_recover=find_type(argument, &tc_heuristic_recover_typelib, 2)) <=0) { fprintf(stderr, "Unknown option to tc-heuristic-recover: %s\n",argument); exit(1); } } case OPT_MYISAM_STATS_METHOD: { ulong method_conv; LINT_INIT(method_conv); myisam_stats_method_str= argument; int method; if ((method=find_type(argument, &myisam_stats_method_typelib, 2)) <= 0) { fprintf(stderr, "Invalid value of myisam_stats_method: %s.\n", argument); exit(1); } switch (method-1) { case 0: method_conv= MI_STATS_METHOD_NULLS_EQUAL; break; case 1: method_conv= MI_STATS_METHOD_NULLS_NOT_EQUAL; break; case 2: method_conv= MI_STATS_METHOD_IGNORE_NULLS; break; } global_system_variables.myisam_stats_method= method_conv; break; } case OPT_SQL_MODE: { sql_mode_str= argument; if ((global_system_variables.sql_mode= find_bit_type(argument, &sql_mode_typelib)) == ~(ulong) 0) { fprintf(stderr, "Unknown option to sql-mode: %s\n", argument); exit(1); } global_system_variables.sql_mode= fix_sql_mode(global_system_variables. sql_mode); break; } case OPT_FT_BOOLEAN_SYNTAX: if (ft_boolean_check_syntax_string((byte*) argument)) { fprintf(stderr, "Invalid ft-boolean-syntax string: %s\n", argument); exit(1); } strmake(ft_boolean_syntax, argument, sizeof(ft_boolean_syntax)-1); break; case OPT_SKIP_SAFEMALLOC: #ifdef SAFEMALLOC sf_malloc_quick=1; #endif break; case OPT_LOWER_CASE_TABLE_NAMES: lower_case_table_names= argument ? atoi(argument) : 1; lower_case_table_names_used= 1; break; } return 0; } /* Initiates DEBUG - but no debugging here ! */ static gptr * mysql_getopt_value(const char *keyname, uint key_length, const struct my_option *option) { switch (option->id) { case OPT_KEY_BUFFER_SIZE: case OPT_KEY_CACHE_BLOCK_SIZE: case OPT_KEY_CACHE_DIVISION_LIMIT: case OPT_KEY_CACHE_AGE_THRESHOLD: { KEY_CACHE *key_cache; if (!(key_cache= get_or_create_key_cache(keyname, key_length))) exit(1); switch (option->id) { case OPT_KEY_BUFFER_SIZE: return (gptr*) &key_cache->param_buff_size; case OPT_KEY_CACHE_BLOCK_SIZE: return (gptr*) &key_cache->param_block_size; case OPT_KEY_CACHE_DIVISION_LIMIT: return (gptr*) &key_cache->param_division_limit; case OPT_KEY_CACHE_AGE_THRESHOLD: return (gptr*) &key_cache->param_age_threshold; } } } return option->value; } static void option_error_reporter(enum loglevel level, const char *format, ...) { va_list args; va_start(args, format); vprint_msg_to_log(level, format, args); va_end(args); } static void get_options(int argc,char **argv) { int ho_error; my_getopt_register_get_addr(mysql_getopt_value); strmake(def_ft_boolean_syntax, ft_boolean_syntax, sizeof(ft_boolean_syntax)-1); my_getopt_error_reporter= option_error_reporter; if ((ho_error= handle_options(&argc, &argv, my_long_options, get_one_option))) exit(ho_error); #ifndef WITH_NDBCLUSTER_STORAGE_ENGINE if (opt_ndbcluster) sql_print_warning("this binary does not contain NDBCLUSTER storage engine"); #endif #ifndef WITH_INNOBASE_STORAGE_ENGINE if (opt_innodb) sql_print_warning("this binary does not contain INNODB storage engine"); #endif #ifndef WITH_ISAM_STORAGE_ENGINE if (opt_isam) sql_print_warning("this binary does not contain ISAM storage engine"); #endif #ifndef WITH_BERKELEY_STORAGE_ENGINE if (opt_bdb) sql_print_warning("this binary does not contain BDB storage engine"); #endif if ((opt_log_slow_admin_statements || opt_log_queries_not_using_indexes) && !opt_slow_log) sql_print_warning("options --log-slow-admin-statements and --log-queries-not-using-indexes have no effect if --log-slow-queries is not set"); if (argc > 0) { fprintf(stderr, "%s: Too many arguments (first extra is '%s').\nUse --help to get a list of available options\n", my_progname, *argv); /* FIXME add EXIT_TOO_MANY_ARGUMENTS to "mysys_err.h" and return that code? */ exit(1); } if (opt_help) { usage(); exit(0); } #if !defined(HAVE_REALPATH) || defined(HAVE_BROKEN_REALPATH) my_use_symdir=0; my_disable_symlinks=1; have_symlink=SHOW_OPTION_NO; #else if (!my_use_symdir) { my_disable_symlinks=1; have_symlink=SHOW_OPTION_DISABLED; } #endif if (opt_debugging) { /* Allow break with SIGINT, no core or stack trace */ test_flags|= TEST_SIGINT | TEST_NO_STACKTRACE; test_flags&= ~TEST_CORE_ON_SIGNAL; } /* Set global MyISAM variables from delay_key_write_options */ fix_delay_key_write((THD*) 0, OPT_GLOBAL); #ifndef EMBEDDED_LIBRARY if (mysqld_chroot) set_root(mysqld_chroot); #else max_allowed_packet= global_system_variables.max_allowed_packet; net_buffer_length= global_system_variables.net_buffer_length; #endif fix_paths(); /* Set some global variables from the global_system_variables In most cases the global variables will not be used */ my_disable_locking= myisam_single_user= test(opt_external_locking == 0); my_default_record_cache_size=global_system_variables.read_buff_size; myisam_max_temp_length= (my_off_t) global_system_variables.myisam_max_sort_file_size; /* Set global variables based on startup options */ myisam_block_size=(uint) 1 << my_bit_log2(opt_myisam_block_size); if (opt_short_log_format) opt_specialflag|= SPECIAL_SHORT_LOG_FORMAT; if (opt_log_queries_not_using_indexes) opt_specialflag|= SPECIAL_LOG_QUERIES_NOT_USING_INDEXES; if (init_global_datetime_format(MYSQL_TIMESTAMP_DATE, &global_system_variables.date_format) || init_global_datetime_format(MYSQL_TIMESTAMP_TIME, &global_system_variables.time_format) || init_global_datetime_format(MYSQL_TIMESTAMP_DATETIME, &global_system_variables.datetime_format)) exit(1); } /* Create version name for running mysqld version We automaticly add suffixes -debug, -embedded and -log to the version name to make the version more descriptive. (MYSQL_SERVER_SUFFIX is set by the compilation environment) */ static void set_server_version(void) { char *end= strxmov(server_version, MYSQL_SERVER_VERSION, MYSQL_SERVER_SUFFIX_STR, NullS); #ifdef EMBEDDED_LIBRARY end= strmov(end, "-embedded"); #endif #ifndef DBUG_OFF if (!strstr(MYSQL_SERVER_SUFFIX_STR, "-debug")) end= strmov(end, "-debug"); #endif if (opt_log || opt_update_log || opt_slow_log || opt_bin_log) strmov(end, "-log"); // This may slow down system } static char *get_relative_path(const char *path) { if (test_if_hard_path(path) && is_prefix(path,DEFAULT_MYSQL_HOME) && strcmp(DEFAULT_MYSQL_HOME,FN_ROOTDIR)) { path+=(uint) strlen(DEFAULT_MYSQL_HOME); while (*path == FN_LIBCHAR) path++; } return (char*) path; } /* Fix filename and replace extension where 'dir' is relative to mysql_real_data_home. Return 1 if len(path) > FN_REFLEN */ bool fn_format_relative_to_data_home(my_string to, const char *name, const char *dir, const char *extension) { char tmp_path[FN_REFLEN]; if (!test_if_hard_path(dir)) { strxnmov(tmp_path,sizeof(tmp_path)-1, mysql_real_data_home, dir, NullS); dir=tmp_path; } return !fn_format(to, name, dir, extension, MY_REPLACE_EXT | MY_UNPACK_FILENAME | MY_SAFE_PATH); } static void fix_paths(void) { char buff[FN_REFLEN],*pos; convert_dirname(mysql_home,mysql_home,NullS); /* Resolve symlinks to allow 'mysql_home' to be a relative symlink */ my_realpath(mysql_home,mysql_home,MYF(0)); /* Ensure that mysql_home ends in FN_LIBCHAR */ pos=strend(mysql_home); if (pos[-1] != FN_LIBCHAR) { pos[0]= FN_LIBCHAR; pos[1]= 0; } convert_dirname(mysql_real_data_home,mysql_real_data_home,NullS); convert_dirname(language,language,NullS); (void) my_load_path(mysql_home,mysql_home,""); // Resolve current dir (void) my_load_path(mysql_real_data_home,mysql_real_data_home,mysql_home); (void) my_load_path(pidfile_name,pidfile_name,mysql_real_data_home); strmake(opt_plugin_dir, get_relative_path(LIBDIR), sizeof(opt_plugin_dir) - 1); opt_plugin_dir_ptr= opt_plugin_dir; (void) my_load_path(opt_plugin_dir, opt_plugin_dir_ptr, mysql_home); char *sharedir=get_relative_path(SHAREDIR); if (test_if_hard_path(sharedir)) strmake(buff,sharedir,sizeof(buff)-1); /* purecov: tested */ else strxnmov(buff,sizeof(buff)-1,mysql_home,sharedir,NullS); convert_dirname(buff,buff,NullS); (void) my_load_path(language,language,buff); /* If --character-sets-dir isn't given, use shared library dir */ if (charsets_dir != mysql_charsets_dir) { strxnmov(mysql_charsets_dir, sizeof(mysql_charsets_dir)-1, buff, CHARSET_DIR, NullS); } (void) my_load_path(mysql_charsets_dir, mysql_charsets_dir, buff); convert_dirname(mysql_charsets_dir, mysql_charsets_dir, NullS); charsets_dir=mysql_charsets_dir; if (init_tmpdir(&mysql_tmpdir_list, opt_mysql_tmpdir)) exit(1); #ifdef HAVE_REPLICATION if (!slave_load_tmpdir) { if (!(slave_load_tmpdir = (char*) my_strdup(mysql_tmpdir, MYF(MY_FAE)))) exit(1); } #endif /* HAVE_REPLICATION */ } /* Return a bitfield from a string of substrings separated by ',' returns ~(ulong) 0 on error. */ static ulong find_bit_type(const char *x, TYPELIB *bit_lib) { bool found_end; int found_count; const char *end,*i,*j; const char **array, *pos; ulong found,found_int,bit; DBUG_ENTER("find_bit_type"); DBUG_PRINT("enter",("x: '%s'",x)); found=0; found_end= 0; pos=(my_string) x; while (*pos == ' ') pos++; found_end= *pos == 0; while (!found_end) { if (!*(end=strcend(pos,','))) /* Let end point at fieldend */ { while (end > pos && end[-1] == ' ') end--; /* Skip end-space */ found_end=1; } found_int=0; found_count=0; for (array=bit_lib->type_names, bit=1 ; (i= *array++) ; bit<<=1) { j=pos; while (j != end) { if (my_toupper(mysqld_charset,*i++) != my_toupper(mysqld_charset,*j++)) goto skip; } found_int=bit; if (! *i) { found_count=1; break; } else if (j != pos) // Half field found { found_count++; // Could be one of two values } skip: ; } if (found_count != 1) DBUG_RETURN(~(ulong) 0); // No unique value found|=found_int; pos=end+1; } DBUG_PRINT("exit",("bit-field: %ld",(ulong) found)); DBUG_RETURN(found); } /* find_bit_type */ /* Check if file system used for databases is case insensitive SYNOPSIS test_if_case_sensitive() dir_name Directory to test RETURN -1 Don't know (Test failed) 0 File system is case sensitive 1 File system is case insensitive */ static int test_if_case_insensitive(const char *dir_name) { int result= 0; File file; char buff[FN_REFLEN], buff2[FN_REFLEN]; MY_STAT stat_info; DBUG_ENTER("test_if_case_insensitive"); fn_format(buff, glob_hostname, dir_name, ".lower-test", MY_UNPACK_FILENAME | MY_REPLACE_EXT | MY_REPLACE_DIR); fn_format(buff2, glob_hostname, dir_name, ".LOWER-TEST", MY_UNPACK_FILENAME | MY_REPLACE_EXT | MY_REPLACE_DIR); (void) my_delete(buff2, MYF(0)); if ((file= my_create(buff, 0666, O_RDWR, MYF(0))) < 0) { sql_print_warning("Can't create test file %s", buff); DBUG_RETURN(-1); } my_close(file, MYF(0)); if (my_stat(buff2, &stat_info, MYF(0))) result= 1; // Can access file (void) my_delete(buff, MYF(MY_WME)); DBUG_PRINT("exit", ("result: %d", result)); DBUG_RETURN(result); } /* Create file to store pid number */ static void create_pid_file() { File file; if ((file = my_create(pidfile_name,0664, O_WRONLY | O_TRUNC, MYF(MY_WME))) >= 0) { char buff[21], *end; end= int10_to_str((long) getpid(), buff, 10); *end++= '\n'; if (!my_write(file, (byte*) buff, (uint) (end-buff), MYF(MY_WME | MY_NABP))) { (void) my_close(file, MYF(0)); return; } (void) my_close(file, MYF(0)); } sql_perror("Can't start server: can't create PID file"); exit(1); } /***************************************************************************** Instantiate have_xyx for missing storage engines *****************************************************************************/ #undef have_isam #undef have_berkeley_db #undef have_innodb #undef have_ndbcluster #undef have_example_db #undef have_archive_db #undef have_csv_db #undef have_federated_db #undef have_partition_db #undef have_blackhole_db SHOW_COMP_OPTION have_berkeley_db= SHOW_OPTION_NO; SHOW_COMP_OPTION have_innodb= SHOW_OPTION_NO; SHOW_COMP_OPTION have_isam= SHOW_OPTION_NO; SHOW_COMP_OPTION have_ndbcluster= SHOW_OPTION_NO; SHOW_COMP_OPTION have_example_db= SHOW_OPTION_NO; SHOW_COMP_OPTION have_archive_db= SHOW_OPTION_NO; SHOW_COMP_OPTION have_csv_db= SHOW_OPTION_NO; SHOW_COMP_OPTION have_federated_db= SHOW_OPTION_NO; SHOW_COMP_OPTION have_partition_db= SHOW_OPTION_NO; SHOW_COMP_OPTION have_blackhole_db= SHOW_OPTION_NO; #ifndef WITH_BERKELEY_STORAGE_ENGINE bool berkeley_shared_data; ulong berkeley_max_lock, berkeley_log_buffer_size; ulonglong berkeley_cache_size; ulong berkeley_region_size, berkeley_cache_parts; char *berkeley_home, *berkeley_tmpdir, *berkeley_logdir; #endif #ifndef WITH_INNOBASE_STORAGE_ENGINE uint innobase_flush_log_at_trx_commit; ulong innobase_fast_shutdown; long innobase_mirrored_log_groups, innobase_log_files_in_group; long innobase_log_file_size, innobase_log_buffer_size; long innobase_buffer_pool_size, innobase_additional_mem_pool_size; long innobase_buffer_pool_awe_mem_mb; long innobase_file_io_threads, innobase_lock_wait_timeout; long innobase_force_recovery; long innobase_open_files; char *innobase_data_home_dir, *innobase_data_file_path; char *innobase_log_group_home_dir, *innobase_log_arch_dir; char *innobase_unix_file_flush_method; my_bool innobase_log_archive, innobase_use_doublewrite, innobase_use_checksums, innobase_file_per_table, innobase_locks_unsafe_for_binlog; ulong srv_max_buf_pool_modified_pct; ulong srv_max_purge_lag; ulong srv_auto_extend_increment; ulong srv_n_spin_wait_rounds; ulong srv_n_free_tickets_to_enter; ulong srv_thread_sleep_delay; ulong srv_thread_concurrency; ulong srv_commit_concurrency; #endif #ifndef WITH_NDBCLUSTER_STORAGE_ENGINE ulong ndb_cache_check_time; #endif /***************************************************************************** Instantiate templates *****************************************************************************/ #ifdef HAVE_EXPLICIT_TEMPLATE_INSTANTIATION /* Used templates */ template class I_List; template class I_List_iterator; template class I_List; template class I_List; template class I_List; template class I_List; template class I_List_iterator; #endif