/* Copyright (C) 2005 MySQL AB This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef RPL_RLI_H #define RPL_RLI_H #define MAX_SLAVE_ERRMSG 1024 #include "rpl_tblmap.h" /**************************************************************************** Replication SQL Thread st_relay_log_info contains: - the current relay log - the current relay log offset - master log name - master log sequence corresponding to the last update - misc information specific to the SQL thread st_relay_log_info is initialized from the slave.info file if such exists. Otherwise, data members are intialized with defaults. The initialization is done with init_relay_log_info() call. The format of slave.info file: relay_log_name relay_log_pos master_log_name master_log_pos To clean up, call end_relay_log_info() *****************************************************************************/ typedef struct st_relay_log_info { /* If flag set, then rli does not store its state in any info file. This is the case only when we execute BINLOG SQL commands inside a client, non-replication thread. */ bool no_storage; /*** The following variables can only be read when protect by data lock ****/ /* info_fd - file descriptor of the info file. set only during initialization or clean up - safe to read anytime cur_log_fd - file descriptor of the current read relay log */ File info_fd,cur_log_fd; /* Protected with internal locks. Must get data_lock when resetting the logs. */ MYSQL_LOG relay_log; LOG_INFO linfo; IO_CACHE cache_buf,*cur_log; /* The following variables are safe to read any time */ /* IO_CACHE of the info file - set only during init or end */ IO_CACHE info_file; /* When we restart slave thread we need to have access to the previously created temporary tables. Modified only on init/end and by the SQL thread, read only by SQL thread. */ TABLE *save_temporary_tables; /* standard lock acquistion order to avoid deadlocks: run_lock, data_lock, relay_log.LOCK_log, relay_log.LOCK_index */ pthread_mutex_t data_lock,run_lock; /* start_cond is broadcast when SQL thread is started stop_cond - when stopped data_cond - when data protected by data_lock changes */ pthread_cond_t start_cond, stop_cond, data_cond; /* parent master info structure */ struct st_master_info *mi; /* Needed to deal properly with cur_log getting closed and re-opened with a different log under our feet */ uint32 cur_log_old_open_count; /* Let's call a group (of events) : - a transaction or - an autocommiting query + its associated events (INSERT_ID, TIMESTAMP...) We need these rli coordinates : - relay log name and position of the beginning of the group we currently are executing. Needed to know where we have to restart when replication has stopped in the middle of a group (which has been rolled back by the slave). - relay log name and position just after the event we have just executed. This event is part of the current group. Formerly we only had the immediately above coordinates, plus a 'pending' variable, but this dealt wrong with the case of a transaction starting on a relay log and finishing (commiting) on another relay log. Case which can happen when, for example, the relay log gets rotated because of max_binlog_size. */ char group_relay_log_name[FN_REFLEN]; ulonglong group_relay_log_pos; char event_relay_log_name[FN_REFLEN]; ulonglong event_relay_log_pos; ulonglong future_event_relay_log_pos; /* Original log name and position of the group we're currently executing (whose coordinates are group_relay_log_name/pos in the relay log) in the master's binlog. These concern the *group*, because in the master's binlog the log_pos that comes with each event is the position of the beginning of the group. */ char group_master_log_name[FN_REFLEN]; volatile my_off_t group_master_log_pos; /* Handling of the relay_log_space_limit optional constraint. ignore_log_space_limit is used to resolve a deadlock between I/O and SQL threads, the SQL thread sets it to unblock the I/O thread and make it temporarily forget about the constraint. */ ulonglong log_space_limit,log_space_total; bool ignore_log_space_limit; /* When it commits, InnoDB internally stores the master log position it has processed so far; the position to store is the one of the end of the committing event (the COMMIT query event, or the event if in autocommit mode). */ #if MYSQL_VERSION_ID < 40100 ulonglong future_master_log_pos; #else ulonglong future_group_master_log_pos; #endif time_t last_master_timestamp; /* Needed for problems when slave stops and we want to restart it skipping one or more events in the master log that have caused errors, and have been manually applied by DBA already. */ volatile uint32 slave_skip_counter; volatile ulong abort_pos_wait; /* Incremented on change master */ volatile ulong slave_run_id; /* Incremented on slave start */ pthread_mutex_t log_space_lock; pthread_cond_t log_space_cond; THD * sql_thd; int last_slave_errno; #ifndef DBUG_OFF int events_till_abort; #endif char last_slave_error[MAX_SLAVE_ERRMSG]; /* if not set, the value of other members of the structure are undefined */ bool inited; volatile bool abort_slave; volatile uint slave_running; /* Condition and its parameters from START SLAVE UNTIL clause. UNTIL condition is tested with is_until_satisfied() method that is called by exec_relay_log_event(). is_until_satisfied() caches the result of the comparison of log names because log names don't change very often; this cache is invalidated by parts of code which change log names with notify_*_log_name_updated() methods. (They need to be called only if SQL thread is running). */ enum {UNTIL_NONE= 0, UNTIL_MASTER_POS, UNTIL_RELAY_POS} until_condition; char until_log_name[FN_REFLEN]; ulonglong until_log_pos; /* extension extracted from log_name and converted to int */ ulong until_log_name_extension; /* Cached result of comparison of until_log_name and current log name -2 means unitialised, -1,0,1 are comarison results */ enum { UNTIL_LOG_NAMES_CMP_UNKNOWN= -2, UNTIL_LOG_NAMES_CMP_LESS= -1, UNTIL_LOG_NAMES_CMP_EQUAL= 0, UNTIL_LOG_NAMES_CMP_GREATER= 1 } until_log_names_cmp_result; char cached_charset[6]; /* trans_retries varies between 0 to slave_transaction_retries and counts how many times the slave has retried the present transaction; gets reset to 0 when the transaction finally succeeds. retried_trans is a cumulative counter: how many times the slave has retried a transaction (any) since slave started. */ ulong trans_retries, retried_trans; /* If the end of the hot relay log is made of master's events ignored by the slave I/O thread, these two keep track of the coords (in the master's binlog) of the last of these events seen by the slave I/O thread. If not, ign_master_log_name_end[0] == 0. As they are like a Rotate event read/written from/to the relay log, they are both protected by rli->relay_log.LOCK_log. */ char ign_master_log_name_end[FN_REFLEN]; ulonglong ign_master_log_pos_end; st_relay_log_info(); ~st_relay_log_info(); /* Invalidate cached until_log_name and group_relay_log_name comparison result. Should be called after any update of group_realy_log_name if there chances that sql_thread is running. */ inline void notify_group_relay_log_name_update() { if (until_condition==UNTIL_RELAY_POS) until_log_names_cmp_result= UNTIL_LOG_NAMES_CMP_UNKNOWN; } /* The same as previous but for group_master_log_name. */ inline void notify_group_master_log_name_update() { if (until_condition==UNTIL_MASTER_POS) until_log_names_cmp_result= UNTIL_LOG_NAMES_CMP_UNKNOWN; } inline void inc_event_relay_log_pos() { event_relay_log_pos= future_event_relay_log_pos; } void inc_group_relay_log_pos(ulonglong log_pos, bool skip_lock=0); int wait_for_pos(THD* thd, String* log_name, longlong log_pos, longlong timeout); void close_temporary_tables(); /* Check if UNTIL condition is satisfied. See slave.cc for more. */ bool is_until_satisfied(); inline ulonglong until_pos() { return ((until_condition == UNTIL_MASTER_POS) ? group_master_log_pos : group_relay_log_pos); } TABLE_LIST *tables_to_lock; /* RBR: Tables to lock */ uint tables_to_lock_count; /* RBR: Count of tables to lock */ table_mapping m_table_map; /* RBR: Mapping table-id to table */ /* Last charset (6 bytes) seen by slave SQL thread is cached here; it helps the thread save 3 get_charset() per Query_log_event if the charset is not changing from event to event (common situation). When the 6 bytes are equal to 0 is used to mean "cache is invalidated". */ void cached_charset_invalidate(); bool cached_charset_compare(char *charset); /* To reload special tables when they are changes, we introduce a set of functions that will mark whenever special functions need to be called after modifying tables. Right now, the tables are either ACL tables or grants tables. */ enum enum_reload_flag { RELOAD_NONE_F = 0UL, RELOAD_GRANT_F = (1UL << 0), RELOAD_ACCESS_F = (1UL << 1) }; ulong m_reload_flags; void touching_table(char const* db, char const* table, ulong table_id); void transaction_end(THD*); void cleanup_context(THD *, bool); void clear_tables_to_lock() { TABLE_LIST *ptr= tables_to_lock; while (ptr) { char *to_free= reinterpret_cast(ptr); ptr= ptr->next_global; my_free(to_free, MYF(MY_WME)); } tables_to_lock= 0; tables_to_lock_count= 0; } time_t unsafe_to_stop_at; } RELAY_LOG_INFO; #endif /* RPL_RLI_H */