/* Copyright (c) 2000, 2011, Oracle and/or its affiliates. 2009-2011 Monty Program Ab This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* Classes in mysql */ #ifdef USE_PRAGMA_INTERFACE #pragma interface /* gcc class implementation */ #endif #include "log.h" #include "rpl_tblmap.h" /** Interface for Item iterator */ class Item_iterator { public: /** Shall set this iterator to the position before the first item @note This method also may perform some other initialization actions like allocation of certain resources. */ virtual void open()= 0; /** Shall return the next Item (or NULL if there is no next item) and move pointer to position after it. */ virtual Item *next()= 0; /** Shall force iterator to free resources (if it holds them) @note One should not use the iterator without open() call after close() */ virtual void close()= 0; virtual ~Item_iterator() {} }; /** Item iterator over List_iterator_fast for Item references */ class Item_iterator_ref_list: public Item_iterator { List_iterator list; public: Item_iterator_ref_list(List_iterator &arg_list): list(arg_list) {} void open() { list.rewind(); } Item *next() { return *(list++); } void close() {} }; /** Item iterator over List_iterator_fast for Items */ class Item_iterator_list: public Item_iterator { List_iterator list; public: Item_iterator_list(List_iterator &arg_list): list(arg_list) {} void open() { list.rewind(); } Item *next() { return (list++); } void close() {} }; /** Item iterator over Item interface for rows */ class Item_iterator_row: public Item_iterator { Item *base_item; uint current; public: Item_iterator_row(Item *base) : base_item(base), current(0) {} void open() { current= 0; } Item *next() { if (current >= base_item->cols()) return NULL; return base_item->element_index(current++); } void close() {} }; /** An interface that is used to take an action when the locking module notices that a table version has changed since the last execution. "Table" here may refer to any kind of table -- a base table, a temporary table, a view or an information schema table. When we open and lock tables for execution of a prepared statement, we must verify that they did not change since statement prepare. If some table did change, the statement parse tree *may* be no longer valid, e.g. in case it contains optimizations that depend on table metadata. This class provides an interface (a method) that is invoked when such a situation takes place. The implementation of the method simply reports an error, but the exact details depend on the nature of the SQL statement. At most 1 instance of this class is active at a time, in which case THD::m_reprepare_observer is not NULL. @sa check_and_update_table_version() for details of the version tracking algorithm @sa Open_tables_state::m_reprepare_observer for the life cycle of metadata observers. */ class Reprepare_observer { public: /** Check if a change of metadata is OK. In future the signature of this method may be extended to accept the old and the new versions, but since currently the check is very simple, we only need the THD to report an error. */ bool report_error(THD *thd); bool is_invalidated() const { return m_invalidated; } void reset_reprepare_observer() { m_invalidated= FALSE; } Reprepare_observer() {} /* Remove gcc warning */ private: bool m_invalidated; }; #include class Relay_log_info; class Query_log_event; class Load_log_event; class Slave_log_event; class sp_rcontext; class sp_cache; class Lex_input_stream; class Parser_state; class Rows_log_event; enum enum_enable_or_disable { LEAVE_AS_IS, ENABLE, DISABLE }; enum enum_ha_read_modes { RFIRST, RNEXT, RPREV, RLAST, RKEY, RNEXT_SAME }; enum enum_duplicates { DUP_ERROR, DUP_REPLACE, DUP_UPDATE }; enum enum_delay_key_write { DELAY_KEY_WRITE_NONE, DELAY_KEY_WRITE_ON, DELAY_KEY_WRITE_ALL }; #define SLAVE_EXEC_MODE_STRICT (1U << 0) #define SLAVE_EXEC_MODE_IDEMPOTENT (1U << 1) enum enum_mark_columns { MARK_COLUMNS_NONE, MARK_COLUMNS_READ, MARK_COLUMNS_WRITE}; extern char internal_table_name[2]; extern char empty_c_string[1]; extern MYSQL_PLUGIN_IMPORT const char **errmesg; extern bool volatile shutdown_in_progress; #define TC_LOG_PAGE_SIZE 8192 #define TC_LOG_MIN_SIZE (3*TC_LOG_PAGE_SIZE) #define TC_HEURISTIC_RECOVER_COMMIT 1 #define TC_HEURISTIC_RECOVER_ROLLBACK 2 extern uint tc_heuristic_recover; typedef struct st_user_var_events { user_var_entry *user_var_event; char *value; ulong length; Item_result type; uint charset_number; } BINLOG_USER_VAR_EVENT; #define RP_LOCK_LOG_IS_ALREADY_LOCKED 1 #define RP_FORCE_ROTATE 2 #define RP_BINLOG_CHECKSUM_ALG_CHANGE 4 /* The COPY_INFO structure is used by INSERT/REPLACE code. The schema of the row counting by the INSERT/INSERT ... ON DUPLICATE KEY UPDATE code: If a row is inserted then the copied variable is incremented. If a row is updated by the INSERT ... ON DUPLICATE KEY UPDATE and the new data differs from the old one then the copied and the updated variables are incremented. The touched variable is incremented if a row was touched by the update part of the INSERT ... ON DUPLICATE KEY UPDATE no matter whether the row was actually changed or not. */ typedef struct st_copy_info { ha_rows records; /**< Number of processed records */ ha_rows deleted; /**< Number of deleted records */ ha_rows updated; /**< Number of updated records */ ha_rows copied; /**< Number of copied records */ ha_rows error_count; ha_rows touched; /* Number of touched records */ enum enum_duplicates handle_duplicates; int escape_char, last_errno; bool ignore; /* for INSERT ... UPDATE */ List *update_fields; List *update_values; /* for VIEW ... WITH CHECK OPTION */ TABLE_LIST *view; } COPY_INFO; class Key_part_spec :public Sql_alloc { public: const char *field_name; uint length; Key_part_spec(const char *name,uint len=0) :field_name(name), length(len) {} bool operator==(const Key_part_spec& other) const; /** Construct a copy of this Key_part_spec. field_name is copied by-pointer as it is known to never change. At the same time 'length' may be reset in mysql_prepare_create_table, and this is why we supply it with a copy. @return If out of memory, 0 is returned and an error is set in THD. */ Key_part_spec *clone(MEM_ROOT *mem_root) const { return new (mem_root) Key_part_spec(*this); } }; class Alter_drop :public Sql_alloc { public: enum drop_type {KEY, COLUMN }; const char *name; enum drop_type type; Alter_drop(enum drop_type par_type,const char *par_name) :name(par_name), type(par_type) {} /** Used to make a clone of this object for ALTER/CREATE TABLE @sa comment for Key_part_spec::clone */ Alter_drop *clone(MEM_ROOT *mem_root) const { return new (mem_root) Alter_drop(*this); } }; class Alter_column :public Sql_alloc { public: const char *name; Item *def; Alter_column(const char *par_name,Item *literal) :name(par_name), def(literal) {} /** Used to make a clone of this object for ALTER/CREATE TABLE @sa comment for Key_part_spec::clone */ Alter_column *clone(MEM_ROOT *mem_root) const { return new (mem_root) Alter_column(*this); } }; class Key :public Sql_alloc { public: enum Keytype { PRIMARY, UNIQUE, MULTIPLE, FULLTEXT, SPATIAL, FOREIGN_KEY}; enum Keytype type; KEY_CREATE_INFO key_create_info; List columns; const char *name; engine_option_value *option_list; bool generated; Key(enum Keytype type_par, const char *name_arg, KEY_CREATE_INFO *key_info_arg, bool generated_arg, List &cols, engine_option_value *create_opt) :type(type_par), key_create_info(*key_info_arg), columns(cols), name(name_arg), option_list(create_opt), generated(generated_arg) {} Key(const Key &rhs, MEM_ROOT *mem_root); virtual ~Key() {} /* Equality comparison of keys (ignoring name) */ friend bool foreign_key_prefix(Key *a, Key *b); /** Used to make a clone of this object for ALTER/CREATE TABLE @sa comment for Key_part_spec::clone */ virtual Key *clone(MEM_ROOT *mem_root) const { return new (mem_root) Key(*this, mem_root); } }; class Table_ident; class Foreign_key: public Key { public: enum fk_match_opt { FK_MATCH_UNDEF, FK_MATCH_FULL, FK_MATCH_PARTIAL, FK_MATCH_SIMPLE}; enum fk_option { FK_OPTION_UNDEF, FK_OPTION_RESTRICT, FK_OPTION_CASCADE, FK_OPTION_SET_NULL, FK_OPTION_NO_ACTION, FK_OPTION_DEFAULT}; Table_ident *ref_table; List ref_columns; uint delete_opt, update_opt, match_opt; Foreign_key(const char *name_arg, List &cols, Table_ident *table, List &ref_cols, uint delete_opt_arg, uint update_opt_arg, uint match_opt_arg) :Key(FOREIGN_KEY, name_arg, &default_key_create_info, 0, cols, NULL), ref_table(table), ref_columns(ref_cols), delete_opt(delete_opt_arg), update_opt(update_opt_arg), match_opt(match_opt_arg) {} Foreign_key(const Foreign_key &rhs, MEM_ROOT *mem_root); /** Used to make a clone of this object for ALTER/CREATE TABLE @sa comment for Key_part_spec::clone */ virtual Key *clone(MEM_ROOT *mem_root) const { return new (mem_root) Foreign_key(*this, mem_root); } /* Used to validate foreign key options */ bool validate(List &table_fields); }; typedef struct st_mysql_lock { TABLE **table; uint table_count,lock_count; THR_LOCK_DATA **locks; } MYSQL_LOCK; class LEX_COLUMN : public Sql_alloc { public: String column; uint rights; LEX_COLUMN (const String& x,const uint& y ): column (x),rights (y) {} }; /* Note: these states are actually bit coded with HARD */ enum killed_state { NOT_KILLED= 0, KILL_HARD_BIT= 1, /* Bit for HARD KILL */ KILL_BAD_DATA= 2, KILL_BAD_DATA_HARD= 3, KILL_QUERY= 4, KILL_QUERY_HARD= 5, /* All of the following killed states will kill the connection KILL_CONNECTION must be the first of these! */ KILL_CONNECTION= 6, KILL_CONNECTION_HARD= 7, KILL_SYSTEM_THREAD= 8, KILL_SYSTEM_THREAD_HARD= 9, KILL_SERVER= 10, KILL_SERVER_HARD= 11 }; extern int killed_errno(killed_state killed); #define killed_mask_hard(killed) ((killed_state) ((killed) & ~KILL_HARD_BIT)) enum killed_type { KILL_TYPE_ID, KILL_TYPE_USER }; #include "sql_lex.h" /* Must be here */ class Delayed_insert; class select_result; class Time_zone; #define THD_SENTRY_MAGIC 0xfeedd1ff #define THD_SENTRY_GONE 0xdeadbeef #define THD_CHECK_SENTRY(thd) DBUG_ASSERT(thd->dbug_sentry == THD_SENTRY_MAGIC) struct system_variables { /* How dynamically allocated system variables are handled: The global_system_variables and max_system_variables are "authoritative" They both should have the same 'version' and 'size'. When attempting to access a dynamic variable, if the session version is out of date, then the session version is updated and realloced if neccessary and bytes copied from global to make up for missing data. Note that one should use my_bool instead of bool here, as the variables are used with my_getopt.c */ ulong dynamic_variables_version; char* dynamic_variables_ptr; uint dynamic_variables_head; /* largest valid variable offset */ uint dynamic_variables_size; /* how many bytes are in use */ ulonglong myisam_max_extra_sort_file_size; ulonglong myisam_max_sort_file_size; ulonglong max_heap_table_size; ulonglong tmp_table_size; ulonglong long_query_time; ulonglong join_buff_space_limit; ha_rows select_limit; ha_rows max_join_size; ulong auto_increment_increment, auto_increment_offset; ulong bulk_insert_buff_size; ulong join_buff_size; ulong join_cache_level; ulong max_allowed_packet; ulong max_error_count; ulong max_length_for_sort_data; ulong max_sort_length; ulong max_tmp_tables; ulong max_insert_delayed_threads; ulong min_examined_row_limit; ulong myisam_repair_threads; ulong myisam_sort_buff_size; ulong myisam_stats_method; ulong net_buffer_length; ulong net_interactive_timeout; ulong net_read_timeout; ulong net_retry_count; ulong net_wait_timeout; ulong net_write_timeout; ulong optimizer_prune_level; ulong optimizer_search_depth; /* A bitmap for switching optimizations on/off */ ulong optimizer_switch; ulong preload_buff_size; ulong profiling_history_size; ulong query_cache_type; ulong read_buff_size; ulong read_rnd_buff_size; ulong mrr_buff_size; ulong div_precincrement; ulong sortbuff_size; /* Total size of all buffers used by the subselect_rowid_merge_engine. */ ulong rowid_merge_buff_size; ulong thread_handling; ulong tx_isolation; ulong completion_type; /* Determines which non-standard SQL behaviour should be enabled */ ulong sql_mode; ulong max_sp_recursion_depth; /* check of key presence in updatable view */ ulong updatable_views_with_limit; ulong default_week_format; ulong max_seeks_for_key; ulong range_alloc_block_size; ulong query_alloc_block_size; ulong query_prealloc_size; ulong trans_alloc_block_size; ulong trans_prealloc_size; ulong log_warnings; ulong group_concat_max_len; /* Flags for slow log filtering */ ulong log_slow_rate_limit; ulong log_slow_filter; ulong log_slow_verbosity; ulong ndb_autoincrement_prefetch_sz; ulong ndb_index_stat_cache_entries; ulong ndb_index_stat_update_freq; ulong binlog_format; // binlog format for this thd (see enum_binlog_format) ulong progress_report_time; my_bool binlog_annotate_row_events; my_bool binlog_direct_non_trans_update; /* In slave thread we need to know in behalf of which thread the query is being run to replicate temp tables properly */ my_thread_id pseudo_thread_id; my_bool low_priority_updates; my_bool new_mode; /* compatibility option: - index usage hints (USE INDEX without a FOR clause) behave as in 5.0 */ my_bool old_mode; my_bool query_cache_wlock_invalidate; my_bool engine_condition_pushdown; my_bool keep_files_on_create; my_bool ndb_force_send; my_bool ndb_use_copying_alter_table; my_bool ndb_use_exact_count; my_bool ndb_use_transactions; my_bool ndb_index_stat_enable; my_bool old_alter_table; my_bool old_passwords; plugin_ref table_plugin; /* Only charset part of these variables is sensible */ CHARSET_INFO *character_set_filesystem; CHARSET_INFO *character_set_client; CHARSET_INFO *character_set_results; /* Both charset and collation parts of these variables are important */ CHARSET_INFO *collation_server; CHARSET_INFO *collation_database; CHARSET_INFO *collation_connection; /* Locale Support */ MY_LOCALE *lc_time_names; Time_zone *time_zone; /* DATE, DATETIME and MYSQL_TIME formats */ DATE_TIME_FORMAT *date_format; DATE_TIME_FORMAT *datetime_format; DATE_TIME_FORMAT *time_format; my_bool sysdate_is_now; /* deadlock detection */ ulong wt_timeout_short, wt_deadlock_search_depth_short; ulong wt_timeout_long, wt_deadlock_search_depth_long; }; /** Per thread status variables. Must be long/ulong up to last_system_status_var so that add_to_status/add_diff_to_status can work. */ typedef struct system_status_var { ulong com_other; ulong com_stat[(uint) SQLCOM_END]; ulong created_tmp_disk_tables; ulong created_tmp_tables; ulong ha_commit_count; ulong ha_delete_count; ulong ha_read_first_count; ulong ha_read_last_count; ulong ha_read_key_count; ulong ha_read_next_count; ulong ha_read_prev_count; ulong ha_read_rnd_count; ulong ha_read_rnd_next_count; /* This number doesn't include calls to the default implementation and calls made by range access. The intent is to count only calls made by BatchedKeyAccess. */ ulong ha_multi_range_read_init_count; ulong ha_rollback_count; ulong ha_update_count; ulong ha_write_count; /* The following are for internal temporary tables */ ulong ha_tmp_update_count; ulong ha_tmp_write_count; ulong ha_prepare_count; ulong ha_discover_count; ulong ha_savepoint_count; ulong ha_savepoint_rollback_count; /* KEY_CACHE parts. These are copies of the original */ ulong key_blocks_changed; ulong key_blocks_used; ulong key_cache_r_requests; ulong key_cache_read; ulong key_cache_w_requests; ulong key_cache_write; /* END OF KEY_CACHE parts */ ulong net_big_packet_count; ulong opened_tables; ulong opened_shares; ulong select_full_join_count; ulong select_full_range_join_count; ulong select_range_count; ulong select_range_check_count; ulong select_scan_count; ulong long_query_count; ulong filesort_merge_passes; ulong filesort_range_count; ulong filesort_rows; ulong filesort_scan_count; /* Prepared statements and binary protocol */ ulong com_stmt_prepare; ulong com_stmt_reprepare; ulong com_stmt_execute; ulong com_stmt_send_long_data; ulong com_stmt_fetch; ulong com_stmt_reset; ulong com_stmt_close; ulong empty_queries; ulong access_denied_errors; ulong lost_connections; /* Number of statements sent from the client */ ulong questions; /* IMPORTANT! SEE last_system_status_var DEFINITION BELOW. Below 'last_system_status_var' are all variables that cannot be handled automatically by add_to_status()/add_diff_to_status(). */ ulonglong bytes_received; ulonglong bytes_sent; ulonglong rows_read; ulonglong rows_sent; ulonglong rows_tmp_read; ulonglong binlog_bytes_written; double last_query_cost; double cpu_time, busy_time; } STATUS_VAR; /* This is used for 'SHOW STATUS'. It must be updated to the last ulong variable in system_status_var which is makes sense to add to the global counter */ #define last_system_status_var questions void mark_transaction_to_rollback(THD *thd, bool all); #ifdef MYSQL_SERVER void free_tmp_table(THD *thd, TABLE *entry); /* The following macro is to make init of Query_arena simpler */ #ifndef DBUG_OFF #define INIT_ARENA_DBUG_INFO is_backup_arena= 0; is_reprepared= FALSE; #else #define INIT_ARENA_DBUG_INFO #endif class Query_arena { public: /* List of items created in the parser for this query. Every item puts itself to the list on creation (see Item::Item() for details)) */ Item *free_list; MEM_ROOT *mem_root; // Pointer to current memroot #ifndef DBUG_OFF bool is_backup_arena; /* True if this arena is used for backup. */ bool is_reprepared; #endif /* The states relfects three diffrent life cycles for three different types of statements: Prepared statement: INITIALIZED -> PREPARED -> EXECUTED. Stored procedure: INITIALIZED_FOR_SP -> EXECUTED. Other statements: CONVENTIONAL_EXECUTION never changes. */ enum enum_state { INITIALIZED= 0, INITIALIZED_FOR_SP= 1, PREPARED= 2, CONVENTIONAL_EXECUTION= 3, EXECUTED= 4, ERROR= -1 }; enum_state state; /* We build without RTTI, so dynamic_cast can't be used. */ enum Type { STATEMENT, PREPARED_STATEMENT, STORED_PROCEDURE }; Query_arena(MEM_ROOT *mem_root_arg, enum enum_state state_arg) : free_list(0), mem_root(mem_root_arg), state(state_arg) { INIT_ARENA_DBUG_INFO; } /* This constructor is used only when Query_arena is created as backup storage for another instance of Query_arena. */ Query_arena() { INIT_ARENA_DBUG_INFO; } virtual Type type() const; virtual ~Query_arena() {}; inline bool is_stmt_prepare() const { return state == INITIALIZED; } inline bool is_first_sp_execute() const { return state == INITIALIZED_FOR_SP; } inline bool is_stmt_prepare_or_first_sp_execute() const { return (int)state < (int)PREPARED; } inline bool is_stmt_prepare_or_first_stmt_execute() const { return (int)state <= (int)PREPARED; } inline bool is_first_stmt_execute() const { return state == PREPARED; } inline bool is_stmt_execute() const { return state == PREPARED || state == EXECUTED; } inline bool is_conventional() const { return state == CONVENTIONAL_EXECUTION; } inline void* alloc(size_t size) { return alloc_root(mem_root,size); } inline void* calloc(size_t size) { void *ptr; if ((ptr=alloc_root(mem_root,size))) bzero(ptr, size); return ptr; } inline char *strdup(const char *str) { return strdup_root(mem_root,str); } inline char *strmake(const char *str, size_t size) { return strmake_root(mem_root,str,size); } inline void *memdup(const void *str, size_t size) { return memdup_root(mem_root,str,size); } inline void *memdup_w_gap(const void *str, size_t size, uint gap) { void *ptr; if ((ptr= alloc_root(mem_root,size+gap))) memcpy(ptr,str,size); return ptr; } void set_query_arena(Query_arena *set); void free_items(); /* Close the active state associated with execution of this statement */ virtual void cleanup_stmt(); }; class Server_side_cursor; /** @class Statement @brief State of a single command executed against this connection. One connection can contain a lot of simultaneously running statements, some of which could be: - prepared, that is, contain placeholders, - opened as cursors. We maintain 1 to 1 relationship between statement and cursor - if user wants to create another cursor for his query, we create another statement for it. To perform some action with statement we reset THD part to the state of that statement, do the action, and then save back modified state from THD to the statement. It will be changed in near future, and Statement will be used explicitly. */ class Statement: public ilink, public Query_arena { Statement(const Statement &rhs); /* not implemented: */ Statement &operator=(const Statement &rhs); /* non-copyable */ public: /* Uniquely identifies each statement object in thread scope; change during statement lifetime. FIXME: must be const */ ulong id; /* MARK_COLUMNS_NONE: Means mark_used_colums is not set and no indicator to handler of fields used is set MARK_COLUMNS_READ: Means a bit in read set is set to inform handler that the field is to be read. If field list contains duplicates, then thd->dup_field is set to point to the last found duplicate. MARK_COLUMNS_WRITE: Means a bit is set in write set to inform handler that it needs to update this field in write_row and update_row. */ enum enum_mark_columns mark_used_columns; LEX_STRING name; /* name for named prepared statements */ LEX *lex; // parse tree descriptor /* Points to the query associated with this statement. It's const, but we need to declare it char * because all table handlers are written in C and need to point to it. Note that if we set query = NULL, we must at the same time set query_length = 0, and protect the whole operation with LOCK_thd_data mutex. To avoid crashes in races, if we do not know that thd->query cannot change at the moment, we should print thd->query like this: (1) reserve the LOCK_thd_data mutex; (2) print or copy the value of query and query_length (3) release LOCK_thd_data mutex. This printing is needed at least in SHOW PROCESSLIST and SHOW ENGINE INNODB STATUS. */ LEX_STRING query_string; /* If opt_query_cache_strip_comments is set, this contains query without comments. If not set, it contains pointer to query_string. */ String base_query; Server_side_cursor *cursor; inline char *query() { return query_string.str; } inline uint32 query_length() { return (uint32)query_string.length; } void set_query_inner(char *query_arg, uint32 query_length_arg); /** Name of the current (default) database. If there is the current (default) database, "db" contains its name. If there is no current (default) database, "db" is NULL and "db_length" is 0. In other words, "db", "db_length" must either be NULL, or contain a valid database name. @note this attribute is set and alloced by the slave SQL thread (for the THD of that thread); that thread is (and must remain, for now) the only responsible for freeing this member. */ char *db; size_t db_length; /* This is set to 1 of last call to send_result_to_client() was ok */ my_bool query_cache_is_applicable; /* This constructor is called for backup statements */ Statement() {} Statement(LEX *lex_arg, MEM_ROOT *mem_root_arg, enum enum_state state_arg, ulong id_arg); virtual ~Statement(); /* Assign execution context (note: not all members) of given stmt to self */ virtual void set_statement(Statement *stmt); void set_n_backup_statement(Statement *stmt, Statement *backup); void restore_backup_statement(Statement *stmt, Statement *backup); /* return class type */ virtual Type type() const; }; /** Container for all statements created/used in a connection. Statements in Statement_map have unique Statement::id (guaranteed by id assignment in Statement::Statement) Non-empty statement names are unique too: attempt to insert a new statement with duplicate name causes older statement to be deleted Statements are auto-deleted when they are removed from the map and when the map is deleted. */ class Statement_map { public: Statement_map(); int insert(THD *thd, Statement *statement); Statement *find_by_name(LEX_STRING *name) { Statement *stmt; stmt= (Statement*)hash_search(&names_hash, (uchar*)name->str, name->length); return stmt; } Statement *find(ulong id) { if (last_found_statement == 0 || id != last_found_statement->id) { Statement *stmt; stmt= (Statement *) hash_search(&st_hash, (uchar *) &id, sizeof(id)); if (stmt && stmt->name.str) return NULL; last_found_statement= stmt; } return last_found_statement; } /* Close all cursors of this connection that use tables of a storage engine that has transaction-specific state and therefore can not survive COMMIT or ROLLBACK. Currently all but MyISAM cursors are closed. */ void close_transient_cursors(); void erase(Statement *statement); /* Erase all statements (calls Statement destructor) */ void reset(); ~Statement_map(); private: HASH st_hash; HASH names_hash; I_List transient_cursor_list; Statement *last_found_statement; }; struct st_savepoint { struct st_savepoint *prev; char *name; uint length; Ha_trx_info *ha_list; }; enum xa_states {XA_NOTR=0, XA_ACTIVE, XA_IDLE, XA_PREPARED, XA_ROLLBACK_ONLY}; extern const char *xa_state_names[]; typedef struct st_xid_state { /* For now, this is only used to catch duplicated external xids */ XID xid; // transaction identifier enum xa_states xa_state; // used by external XA only bool in_thd; /* Error reported by the Resource Manager (RM) to the Transaction Manager. */ uint rm_error; } XID_STATE; extern pthread_mutex_t LOCK_xid_cache; extern HASH xid_cache; bool xid_cache_init(void); void xid_cache_free(void); XID_STATE *xid_cache_search(XID *xid); bool xid_cache_insert(XID *xid, enum xa_states xa_state); bool xid_cache_insert(XID_STATE *xid_state); void xid_cache_delete(XID_STATE *xid_state); /** @class Security_context @brief A set of THD members describing the current authenticated user. */ class Security_context { public: Security_context() {} /* Remove gcc warning */ /* host - host of the client user - user of the client, set to NULL until the user has been read from the connection priv_user - The user privilege we are using. May be "" for anonymous user. ip - client IP */ char *host, *user, *ip; char priv_user[USERNAME_LENGTH]; /* The host privilege we are using */ char priv_host[MAX_HOSTNAME]; /* points to host if host is available, otherwise points to ip */ const char *host_or_ip; ulong master_access; /* Global privileges from mysql.user */ ulong db_access; /* Privileges for current db */ void init(); void destroy(); void skip_grants(); inline char *priv_host_name() { return (*priv_host ? priv_host : (char *)"%"); } bool set_user(char *user_arg); #ifndef NO_EMBEDDED_ACCESS_CHECKS bool change_security_context(THD *thd, LEX_STRING *definer_user, LEX_STRING *definer_host, LEX_STRING *db, Security_context **backup); void restore_security_context(THD *thd, Security_context *backup); #endif bool user_matches(Security_context *); }; /** A registry for item tree transformations performed during query optimization. We register only those changes which require a rollback to re-execute a prepared statement or stored procedure yet another time. */ struct Item_change_record; typedef I_List Item_change_list; /** Type of prelocked mode. See comment for THD::prelocked_mode for complete description. */ enum prelocked_mode_type {NON_PRELOCKED= 0, PRELOCKED= 1, PRELOCKED_UNDER_LOCK_TABLES= 2}; /** Class that holds information about tables which were opened and locked by the thread. It is also used to save/restore this information in push_open_tables_state()/pop_open_tables_state(). */ class Open_tables_state { public: /** As part of class THD, this member is set during execution of a prepared statement. When it is set, it is used by the locking subsystem to report a change in table metadata. When Open_tables_state part of THD is reset to open a system or INFORMATION_SCHEMA table, the member is cleared to avoid spurious ER_NEED_REPREPARE errors -- system and INFORMATION_SCHEMA tables are not subject to metadata version tracking. @sa check_and_update_table_version() */ Reprepare_observer *m_reprepare_observer; /** List of regular tables in use by this thread. Contains temporary and base tables that were opened with @see open_tables(). */ TABLE *open_tables; /** List of temporary tables used by this thread. Contains user-level temporary tables, created with CREATE TEMPORARY TABLE, and internal temporary tables, created, e.g., to resolve a SELECT, or for an intermediate table used in ALTER. XXX Why are internal temporary tables added to this list? */ TABLE *temporary_tables; /** List of tables that were opened with HANDLER OPEN and are still in use by this thread. */ TABLE *handler_tables; TABLE *derived_tables; /* During a MySQL session, one can lock tables in two modes: automatic or manual. In automatic mode all necessary tables are locked just before statement execution, and all acquired locks are stored in 'lock' member. Unlocking takes place automatically as well, when the statement ends. Manual mode comes into play when a user issues a 'LOCK TABLES' statement. In this mode the user can only use the locked tables. Trying to use any other tables will give an error. The locked tables are stored in 'locked_tables' member. Manual locking is described in the 'LOCK_TABLES' chapter of the MySQL manual. See also lock_tables() for details. */ MYSQL_LOCK *lock; /* Tables that were locked with explicit or implicit LOCK TABLES. (Implicit LOCK TABLES happens when we are prelocking tables for execution of statement which uses stored routines. See description THD::prelocked_mode for more info.) */ MYSQL_LOCK *locked_tables; /* CREATE-SELECT keeps an extra lock for the table being created. This field is used to keep the extra lock available for lower level routines, which would otherwise miss that lock. */ MYSQL_LOCK *extra_lock; /* prelocked_mode_type enum and prelocked_mode member are used for indicating whenever "prelocked mode" is on, and what type of "prelocked mode" is it. Prelocked mode is used for execution of queries which explicitly or implicitly (via views or triggers) use functions, thus may need some additional tables (mentioned in query table list) for their execution. First open_tables() call for such query will analyse all functions used by it and add all additional tables to table its list. It will also mark this query as requiring prelocking. After that lock_tables() will issue implicit LOCK TABLES for the whole table list and change thd::prelocked_mode to non-0. All queries called in functions invoked by the main query will use prelocked tables. Non-0 prelocked_mode will also surpress mentioned analysys in those queries thus saving cycles. Prelocked mode will be turned off once close_thread_tables() for the main query will be called. Note: Since not all "tables" present in table list are really locked thd::prelocked_mode does not imply thd::locked_tables. */ prelocked_mode_type prelocked_mode; ulong version; uint current_tablenr; enum enum_flags { BACKUPS_AVAIL = (1U << 0) /* There are backups available */ }; /* Flags with information about the open tables state. */ uint state_flags; /* This constructor serves for creation of Open_tables_state instances which are used as backup storage. */ Open_tables_state() : state_flags(0U) { } Open_tables_state(ulong version_arg); void set_open_tables_state(Open_tables_state *state) { *this= *state; } void reset_open_tables_state() { open_tables= temporary_tables= handler_tables= derived_tables= 0; extra_lock= lock= locked_tables= 0; prelocked_mode= NON_PRELOCKED; state_flags= 0U; m_reprepare_observer= NULL; } }; /** @class Sub_statement_state @brief Used to save context when executing a function or trigger */ /* Defines used for Sub_statement_state::in_sub_stmt */ #define SUB_STMT_TRIGGER 1 #define SUB_STMT_FUNCTION 2 class Sub_statement_state { public: ulonglong options; ulonglong first_successful_insert_id_in_prev_stmt; ulonglong first_successful_insert_id_in_cur_stmt, insert_id_for_cur_row; Discrete_interval auto_inc_interval_for_cur_row; Discrete_intervals_list auto_inc_intervals_forced; ulonglong limit_found_rows; ha_rows cuted_fields, sent_row_count, examined_row_count; ulong client_capabilities; ulong query_plan_flags; uint in_sub_stmt; bool enable_slow_log; bool last_insert_id_used; SAVEPOINT *savepoints; enum enum_check_fields count_cuted_fields; }; /* Flags for the THD::system_thread variable */ enum enum_thread_type { NON_SYSTEM_THREAD= 0, SYSTEM_THREAD_DELAYED_INSERT= 1, SYSTEM_THREAD_SLAVE_IO= 2, SYSTEM_THREAD_SLAVE_SQL= 4, SYSTEM_THREAD_NDBCLUSTER_BINLOG= 8, SYSTEM_THREAD_EVENT_SCHEDULER= 16, SYSTEM_THREAD_EVENT_WORKER= 32 }; inline char const * show_system_thread(enum_thread_type thread) { #define RETURN_NAME_AS_STRING(NAME) case (NAME): return #NAME switch (thread) { static char buf[64]; RETURN_NAME_AS_STRING(NON_SYSTEM_THREAD); RETURN_NAME_AS_STRING(SYSTEM_THREAD_DELAYED_INSERT); RETURN_NAME_AS_STRING(SYSTEM_THREAD_SLAVE_IO); RETURN_NAME_AS_STRING(SYSTEM_THREAD_SLAVE_SQL); RETURN_NAME_AS_STRING(SYSTEM_THREAD_NDBCLUSTER_BINLOG); RETURN_NAME_AS_STRING(SYSTEM_THREAD_EVENT_SCHEDULER); RETURN_NAME_AS_STRING(SYSTEM_THREAD_EVENT_WORKER); default: sprintf(buf, "", thread); return buf; } #undef RETURN_NAME_AS_STRING } /** This class represents the interface for internal error handlers. Internal error handlers are exception handlers used by the server implementation. */ class Internal_error_handler { protected: Internal_error_handler() : m_prev_internal_handler(NULL) {} virtual ~Internal_error_handler() {} public: /** Handle an error condition. This method can be implemented by a subclass to achieve any of the following: - mask an error internally, prevent exposing it to the user, - mask an error and throw another one instead. When this method returns true, the error condition is considered 'handled', and will not be propagated to upper layers. It is the responsability of the code installing an internal handler to then check for trapped conditions, and implement logic to recover from the anticipated conditions trapped during runtime. This mechanism is similar to C++ try/throw/catch: - 'try' correspond to THD::push_internal_handler(), - 'throw' correspond to my_error(), which invokes my_message_sql(), - 'catch' correspond to checking how/if an internal handler was invoked, before removing it from the exception stack with THD::pop_internal_handler(). @param sql_errno the error number @param level the error level @param thd the calling thread @return true if the error is handled */ virtual bool handle_error(uint sql_errno, const char *message, MYSQL_ERROR::enum_warning_level level, THD *thd) = 0; private: Internal_error_handler *m_prev_internal_handler; friend class THD; }; /** Implements the trivial error handler which cancels all error states and prevents an SQLSTATE to be set. */ class Dummy_error_handler : public Internal_error_handler { public: bool handle_error(uint sql_errno, const char *message, MYSQL_ERROR::enum_warning_level level, THD *thd) { /* Ignore error */ return TRUE; } Dummy_error_handler() {} /* Remove gcc warning */ }; /** This class is an internal error handler implementation for DROP TABLE statements. The thing is that there may be warnings during execution of these statements, which should not be exposed to the user. This class is intended to silence such warnings. */ class Drop_table_error_handler : public Internal_error_handler { public: Drop_table_error_handler(Internal_error_handler *err_handler) :m_err_handler(err_handler) { } public: bool handle_error(uint sql_errno, const char *message, MYSQL_ERROR::enum_warning_level level, THD *thd); private: Internal_error_handler *m_err_handler; }; /** Stores status of the currently executed statement. Cleared at the beginning of the statement, and then can hold either OK, ERROR, or EOF status. Can not be assigned twice per statement. */ class Diagnostics_area { public: enum enum_diagnostics_status { /** The area is cleared at start of a statement. */ DA_EMPTY= 0, /** Set whenever one calls my_ok(). */ DA_OK, /** Set whenever one calls my_eof(). */ DA_EOF, /** Set whenever one calls my_error() or my_message(). */ DA_ERROR, /** Set in case of a custom response, such as one from COM_STMT_PREPARE. */ DA_DISABLED }; /** True if status information is sent to the client. */ bool is_sent; /** Set to make set_error_status after set_{ok,eof}_status possible. */ bool can_overwrite_status; void set_ok_status(THD *thd, ha_rows affected_rows_arg, ulonglong last_insert_id_arg, const char *message); void set_eof_status(THD *thd); void set_error_status(THD *thd, uint sql_errno_arg, const char *message_arg); void disable_status(); void reset_diagnostics_area(); bool is_set() const { return m_status != DA_EMPTY; } bool is_error() const { return m_status == DA_ERROR; } bool is_eof() const { return m_status == DA_EOF; } bool is_ok() const { return m_status == DA_OK; } bool is_disabled() const { return m_status == DA_DISABLED; } enum_diagnostics_status status() const { return m_status; } const char *message() const { DBUG_ASSERT(m_status == DA_ERROR || m_status == DA_OK); return m_message; } uint sql_errno() const { DBUG_ASSERT(m_status == DA_ERROR); return m_sql_errno; } uint server_status() const { DBUG_ASSERT(m_status == DA_OK || m_status == DA_EOF); return m_server_status; } ha_rows affected_rows() const { DBUG_ASSERT(m_status == DA_OK); return m_affected_rows; } ulonglong last_insert_id() const { DBUG_ASSERT(m_status == DA_OK); return m_last_insert_id; } uint total_warn_count() const { DBUG_ASSERT(m_status == DA_OK || m_status == DA_EOF); return m_total_warn_count; } /* Used to count any warnings pushed after calling set_ok_status(). */ void increment_warning() { if (m_status != DA_EMPTY) m_total_warn_count++; } Diagnostics_area() { reset_diagnostics_area(); } private: /** Message buffer. Can be used by OK or ERROR status. */ char m_message[MYSQL_ERRMSG_SIZE]; /** SQL error number. One of ER_ codes from share/errmsg.txt. Set by set_error_status. */ uint m_sql_errno; /** Copied from thd->server_status when the diagnostics area is assigned. We need this member as some places in the code use the following pattern: thd->server_status|= ... my_eof(thd); thd->server_status&= ~... Assigned by OK, EOF or ERROR. */ uint m_server_status; /** The number of rows affected by the last statement. This is semantically close to thd->row_count_func, but has a different life cycle. thd->row_count_func stores the value returned by function ROW_COUNT() and is cleared only by statements that update its value, such as INSERT, UPDATE, DELETE and few others. This member is cleared at the beginning of the next statement. We could possibly merge the two, but life cycle of thd->row_count_func can not be changed. */ ha_rows m_affected_rows; /** Similarly to the previous member, this is a replacement of thd->first_successful_insert_id_in_prev_stmt, which is used to implement LAST_INSERT_ID(). */ ulonglong m_last_insert_id; /** The total number of warnings. */ uint m_total_warn_count; enum_diagnostics_status m_status; /** @todo: the following THD members belong here: - warn_list, warn_count, */ }; /** Storage engine specific thread local data. */ struct Ha_data { /** Storage engine specific thread local data. Lifetime: one user connection. */ void *ha_ptr; /** 0: Life time: one statement within a transaction. If @@autocommit is on, also represents the entire transaction. @sa trans_register_ha() 1: Life time: one transaction within a connection. If the storage engine does not participate in a transaction, this should not be used. @sa trans_register_ha() */ Ha_trx_info ha_info[2]; /** NULL: engine is not bound to this thread non-NULL: engine is bound to this thread, engine shutdown forbidden */ plugin_ref lock; Ha_data() :ha_ptr(NULL) {} }; /** @class THD For each client connection we create a separate thread with THD serving as a thread/connection descriptor */ class THD :public Statement, public Open_tables_state { public: /* Used to execute base64 coded binlog events in MySQL server */ Relay_log_info* rli_fake; /* Constant for THD::where initialization in the beginning of every query. It's needed because we do not save/restore THD::where normally during primary (non subselect) query execution. */ static const char * const DEFAULT_WHERE; #ifdef EMBEDDED_LIBRARY struct st_mysql *mysql; unsigned long client_stmt_id; unsigned long client_param_count; struct st_mysql_bind *client_params; char *extra_data; ulong extra_length; struct st_mysql_data *cur_data; struct st_mysql_data *first_data; struct st_mysql_data **data_tail; void clear_data_list(); struct st_mysql_data *alloc_new_dataset(); /* In embedded server it points to the statement that is processed in the current query. We store some results directly in statement fields then. */ struct st_mysql_stmt *current_stmt; #endif NET net; // client connection descriptor scheduler_functions *scheduler; // Scheduler for this connection MEM_ROOT warn_root; // For warnings and errors Protocol *protocol; // Current protocol Protocol_text protocol_text; // Normal protocol Protocol_binary protocol_binary; // Binary protocol HASH user_vars; // hash for user variables String packet; // dynamic buffer for network I/O String convert_buffer; // buffer for charset conversions struct sockaddr_in remote; // client socket address struct my_rnd_struct rand; // used for authentication struct system_variables variables; // Changeable local variables struct system_status_var status_var; // Per thread statistic vars struct system_status_var org_status_var; // For user statistics struct system_status_var *initial_status_var; /* used by show status */ THR_LOCK_INFO lock_info; // Locking info of this thread THR_LOCK_OWNER main_lock_id; // To use for conventional queries THR_LOCK_OWNER *lock_id; // If not main_lock_id, points to // the lock_id of a cursor. /** Protects THD data accessed from other threads: - thd->query and thd->query_length (used by SHOW ENGINE INNODB STATUS and SHOW PROCESSLIST - thd->mysys_var (used by KILL statement and shutdown). Is locked when THD is deleted. */ pthread_mutex_t LOCK_thd_data; /* all prepared statements and cursors of this connection */ Statement_map stmt_map; /* A pointer to the stack frame of handle_one_connection(), which is called first in the thread for handling a client */ char *thread_stack; /** Currently selected catalog. */ char *catalog; /** @note Some members of THD (currently 'Statement::db', 'catalog' and 'query') are set and alloced by the slave SQL thread (for the THD of that thread); that thread is (and must remain, for now) the only responsible for freeing these 3 members. If you add members here, and you add code to set them in replication, don't forget to free_them_and_set_them_to_0 in replication properly. For details see the 'err:' label of the handle_slave_sql() in sql/slave.cc. @see handle_slave_sql */ Security_context main_security_ctx; Security_context *security_ctx; /* Points to info-string that we show in SHOW PROCESSLIST You are supposed to update thd->proc_info only if you have coded a time-consuming piece that MySQL can get stuck in for a long time. Set it using the thd_proc_info(THD *thread, const char *message) macro/function. This member is accessed and assigned without any synchronization. Therefore, it may point only to constant (statically allocated) strings, which memory won't go away over time. */ const char *proc_info; /* Used in error messages to tell user in what part of MySQL we found an error. E. g. when where= "having clause", if fix_fields() fails, user will know that the error was in having clause. */ const char *where; ulong client_capabilities; /* What the client supports */ ulong max_client_packet_length; HASH handler_tables_hash; /* One thread can hold up to one named user-level lock. This variable points to a lock object if the lock is present. See item_func.cc and chapter 'Miscellaneous functions', for functions GET_LOCK, RELEASE_LOCK. */ User_level_lock *ull; #ifndef DBUG_OFF uint dbug_sentry; // watch out for memory corruption #endif struct st_my_thread_var *mysys_var; /* Type of current query: COM_STMT_PREPARE, COM_QUERY, etc. Set from first byte of the packet in do_command() */ enum enum_server_command command; uint32 server_id; uint32 file_id; // for LOAD DATA INFILE /* remote (peer) port */ uint16 peer_port; my_time_t start_time; // start_time and its sec_part ulong start_time_sec_part; // are almost always used separately my_hrtime_t user_time; // track down slow pthread_create ulonglong prior_thr_create_utime, thr_create_utime; ulonglong start_utime, utime_after_lock; // Process indicator struct { /* true, if the currently running command can send progress report packets to a client. Set by mysql_execute_command() for safe commands See CF_REPORT_PROGRESS */ bool report_to_client; /* true, if we will send progress report packets to a client (client has requested them, see CLIENT_PROGRESS; report_to_client is true; not in sub-statement) */ bool report; uint stage, max_stage; ulonglong counter, max_counter; ulonglong next_report_time; } progress; thr_lock_type update_lock_default; Delayed_insert *di; /* <> 0 if we are inside of trigger or stored function. */ uint in_sub_stmt; /* TRUE when the current top has SQL_LOG_BIN ON */ bool sql_log_bin_toplevel; /* True when opt_userstat_running is set at start of query */ bool userstat_running; /* True if we want to log all errors */ bool log_all_errors; /* container for handler's private per-connection data */ Ha_data ha_data[MAX_HA]; bool prepare_derived_at_open; /* To signal that the tmp table to be created is created for materialized derived table or a view. */ bool create_tmp_table_for_derived; bool save_prep_leaf_list; #ifndef MYSQL_CLIENT int binlog_setup_trx_data(); /* Public interface to write RBR events to the binlog */ void binlog_start_trans_and_stmt(); void binlog_set_stmt_begin(); int binlog_write_table_map(TABLE *table, bool is_transactional, my_bool *with_annotate= 0); int binlog_write_row(TABLE* table, bool is_transactional, MY_BITMAP const* cols, size_t colcnt, const uchar *buf); int binlog_delete_row(TABLE* table, bool is_transactional, MY_BITMAP const* cols, size_t colcnt, const uchar *buf); int binlog_update_row(TABLE* table, bool is_transactional, MY_BITMAP const* cols, size_t colcnt, const uchar *old_data, const uchar *new_data); void set_server_id(uint32 sid) { server_id = sid; } /* Member functions to handle pending event for row-level logging. */ template Rows_log_event* binlog_prepare_pending_rows_event(TABLE* table, uint32 serv_id, MY_BITMAP const* cols, size_t colcnt, size_t needed, bool is_transactional, RowsEventT* hint); Rows_log_event* binlog_get_pending_rows_event() const; void binlog_set_pending_rows_event(Rows_log_event* ev); int binlog_flush_pending_rows_event(bool stmt_end); int binlog_remove_pending_rows_event(bool clear_maps); private: /* Number of outstanding table maps, i.e., table maps in the transaction cache. */ uint binlog_table_maps; enum enum_binlog_flag { BINLOG_FLAG_UNSAFE_STMT_PRINTED, BINLOG_FLAG_COUNT }; /** Flags with per-thread information regarding the status of the binary log. */ uint32 binlog_flags; public: uint get_binlog_table_maps() const { return binlog_table_maps; } #endif /* MYSQL_CLIENT */ public: struct st_transactions { SAVEPOINT *savepoints; THD_TRANS all; // Trans since BEGIN WORK THD_TRANS stmt; // Trans for current statement bool on; // see ha_enable_transaction() XID_STATE xid_state; WT_THD wt; ///< for deadlock detection Rows_log_event *m_pending_rows_event; /* Tables changed in transaction (that must be invalidated in query cache). List contain only transactional tables, that not invalidated in query cache (instead of full list of changed in transaction tables). */ CHANGED_TABLE_LIST* changed_tables; MEM_ROOT mem_root; // Transaction-life memory allocation pool void cleanup() { changed_tables= 0; savepoints= 0; /* If rm_error is raised, it means that this piece of a distributed transaction has failed and must be rolled back. But the user must rollback it explicitly, so don't start a new distributed XA until then. */ if (!xid_state.rm_error) xid_state.xid.null(); #ifdef USING_TRANSACTIONS free_root(&mem_root,MYF(MY_KEEP_PREALLOC)); #endif } st_transactions() { #ifdef USING_TRANSACTIONS bzero((char*)this, sizeof(*this)); xid_state.xid.null(); init_sql_alloc(&mem_root, ALLOC_ROOT_MIN_BLOCK_SIZE, 0); #else xid_state.xa_state= XA_NOTR; #endif } } transaction; Field *dup_field; #ifndef __WIN__ sigset_t signals; #endif #ifdef SIGNAL_WITH_VIO_CLOSE Vio* active_vio; #endif /* This is to track items changed during execution of a prepared statement/stored procedure. It's created by nocheck_register_item_tree_change() in memory root of THD, and freed in rollback_item_tree_changes(). For conventional execution it's always empty. */ Item_change_list change_list; /* A permanent memory area of the statement. For conventional execution, the parsed tree and execution runtime reside in the same memory root. In this case stmt_arena points to THD. In case of a prepared statement or a stored procedure statement, thd->mem_root conventionally points to runtime memory, and thd->stmt_arena points to the memory of the PS/SP, where the parsed tree of the statement resides. Whenever you need to perform a permanent transformation of a parsed tree, you should allocate new memory in stmt_arena, to allow correct re-execution of PS/SP. Note: in the parser, stmt_arena == thd, even for PS/SP. */ Query_arena *stmt_arena; /* map for tables that will be updated for a multi-table update query statement, for other query statements, this will be zero. */ table_map table_map_for_update; /* Tells if LAST_INSERT_ID(#) was called for the current statement */ bool arg_of_last_insert_id_function; /* ALL OVER THIS FILE, "insert_id" means "*automatically generated* value for insertion into an auto_increment column". */ /* This is the first autogenerated insert id which was *successfully* inserted by the previous statement (exactly, if the previous statement didn't successfully insert an autogenerated insert id, then it's the one of the statement before, etc). It can also be set by SET LAST_INSERT_ID=# or SELECT LAST_INSERT_ID(#). It is returned by LAST_INSERT_ID(). */ ulonglong first_successful_insert_id_in_prev_stmt; /* Variant of the above, used for storing in statement-based binlog. The difference is that the one above can change as the execution of a stored function progresses, while the one below is set once and then does not change (which is the value which statement-based binlog needs). */ ulonglong first_successful_insert_id_in_prev_stmt_for_binlog; /* This is the first autogenerated insert id which was *successfully* inserted by the current statement. It is maintained only to set first_successful_insert_id_in_prev_stmt when statement ends. */ ulonglong first_successful_insert_id_in_cur_stmt; /* We follow this logic: - when stmt starts, first_successful_insert_id_in_prev_stmt contains the first insert id successfully inserted by the previous stmt. - as stmt makes progress, handler::insert_id_for_cur_row changes; every time get_auto_increment() is called, auto_inc_intervals_in_cur_stmt_for_binlog is augmented with the reserved interval (if statement-based binlogging). - at first successful insertion of an autogenerated value, first_successful_insert_id_in_cur_stmt is set to handler::insert_id_for_cur_row. - when stmt goes to binlog, auto_inc_intervals_in_cur_stmt_for_binlog is binlogged if non-empty. - when stmt ends, first_successful_insert_id_in_prev_stmt is set to first_successful_insert_id_in_cur_stmt. */ /* stmt_depends_on_first_successful_insert_id_in_prev_stmt is set when LAST_INSERT_ID() is used by a statement. If it is set, first_successful_insert_id_in_prev_stmt_for_binlog will be stored in the statement-based binlog. This variable is CUMULATIVE along the execution of a stored function or trigger: if one substatement sets it to 1 it will stay 1 until the function/trigger ends, thus making sure that first_successful_insert_id_in_prev_stmt_for_binlog does not change anymore and is propagated to the caller for binlogging. */ bool stmt_depends_on_first_successful_insert_id_in_prev_stmt; /* List of auto_increment intervals reserved by the thread so far, for storage in the statement-based binlog. Note that its minimum is not first_successful_insert_id_in_cur_stmt: assuming a table with an autoinc column, and this happens: INSERT INTO ... VALUES(3); SET INSERT_ID=3; INSERT IGNORE ... VALUES (NULL); then the latter INSERT will insert no rows (first_successful_insert_id_in_cur_stmt == 0), but storing "INSERT_ID=3" in the binlog is still needed; the list's minimum will contain 3. This variable is cumulative: if several statements are written to binlog as one (stored functions or triggers are used) this list is the concatenation of all intervals reserved by all statements. */ Discrete_intervals_list auto_inc_intervals_in_cur_stmt_for_binlog; /* Used by replication and SET INSERT_ID */ Discrete_intervals_list auto_inc_intervals_forced; /* There is BUG#19630 where statement-based replication of stored functions/triggers with two auto_increment columns breaks. We however ensure that it works when there is 0 or 1 auto_increment column; our rules are a) on master, while executing a top statement involving substatements, first top- or sub- statement to generate auto_increment values wins the exclusive right to see its values be written to binlog (the write will be done by the statement or its caller), and the losers won't see their values be written to binlog. b) on slave, while replicating a top statement involving substatements, first top- or sub- statement to need to read auto_increment values from the master's binlog wins the exclusive right to read them (so the losers won't read their values from binlog but instead generate on their own). a) implies that we mustn't backup/restore auto_inc_intervals_in_cur_stmt_for_binlog. b) implies that we mustn't backup/restore auto_inc_intervals_forced. If there are more than 1 auto_increment columns, then intervals for different columns may mix into the auto_inc_intervals_in_cur_stmt_for_binlog list, which is logically wrong, but there is no point in preventing this mixing by preventing intervals from the secondly inserted column to come into the list, as such prevention would be wrong too. What will happen in the case of INSERT INTO t1 (auto_inc) VALUES(NULL); where t1 has a trigger which inserts into an auto_inc column of t2, is that in binlog we'll store the interval of t1 and the interval of t2 (when we store intervals, soon), then in slave, t1 will use both intervals, t2 will use none; if t1 inserts the same number of rows as on master, normally the 2nd interval will not be used by t1, which is fine. t2's values will be wrong if t2's internal auto_increment counter is different from what it was on master (which is likely). In 5.1, in mixed binlogging mode, row-based binlogging is used for such cases where two auto_increment columns are inserted. */ inline void record_first_successful_insert_id_in_cur_stmt(ulonglong id_arg) { if (first_successful_insert_id_in_cur_stmt == 0) first_successful_insert_id_in_cur_stmt= id_arg; } inline ulonglong read_first_successful_insert_id_in_prev_stmt(void) { if (!stmt_depends_on_first_successful_insert_id_in_prev_stmt) { /* It's the first time we read it */ first_successful_insert_id_in_prev_stmt_for_binlog= first_successful_insert_id_in_prev_stmt; stmt_depends_on_first_successful_insert_id_in_prev_stmt= 1; } return first_successful_insert_id_in_prev_stmt; } /* Used by Intvar_log_event::do_apply_event() and by "SET INSERT_ID=#" (mysqlbinlog). We'll soon add a variant which can take many intervals in argument. */ inline void force_one_auto_inc_interval(ulonglong next_id) { auto_inc_intervals_forced.empty(); // in case of multiple SET INSERT_ID auto_inc_intervals_forced.append(next_id, ULONGLONG_MAX, 0); } ulonglong limit_found_rows; ulonglong options; /* Bitmap of states */ longlong row_count_func; /* For the ROW_COUNT() function */ ha_rows cuted_fields; /* number of rows we actually sent to the client, including "synthetic" rows in ROLLUP etc. */ ha_rows sent_row_count; /** Number of rows read and/or evaluated for a statement. Used for slow log reporting. An examined row is defined as a row that is read and/or evaluated according to a statement condition, including in create_sort_index(). Rows may be counted more than once, e.g., a statement including ORDER BY could possibly evaluate the row in filesort() before reading it for e.g. update. */ ha_rows examined_row_count; USER_CONN *user_connect; CHARSET_INFO *db_charset; /* FIXME: this, and some other variables like 'count_cuted_fields' maybe should be statement/cursor local, that is, moved to Statement class. With current implementation warnings produced in each prepared statement/cursor settle here. */ List warn_list; uint warn_count[(uint) MYSQL_ERROR::WARN_LEVEL_END]; uint total_warn_count; Diagnostics_area main_da; #if defined(ENABLED_PROFILING) && defined(COMMUNITY_SERVER) PROFILING profiling; #endif /* Id of current query. Statement can be reused to execute several queries query_id is global in context of the whole MySQL server. ID is automatically generated from mutex-protected counter. It's used in handler code for various purposes: to check which columns from table are necessary for this select, to check if it's necessary to update auto-updatable fields (like auto_increment and timestamp). */ query_id_t query_id, warn_id; ulong col_access; #ifdef ERROR_INJECT_SUPPORT ulong error_inject_value; #endif /* Statement id is thread-wide. This counter is used to generate ids */ ulong statement_id_counter; ulong rand_saved_seed1, rand_saved_seed2; /* Row counter, mainly for errors and warnings. Not increased in create_sort_index(); may differ from examined_row_count. */ ulong row_count; ulong query_plan_flags; ulong query_plan_fsort_passes; pthread_t real_id; /* For debugging */ my_thread_id thread_id; uint tmp_table, global_read_lock, global_disable_checkpoint; uint server_status,open_options; enum enum_thread_type system_thread; uint select_number; //number of select (used for EXPLAIN) /* variables.transaction_isolation is reset to this after each commit */ enum_tx_isolation session_tx_isolation; enum_check_fields count_cuted_fields; DYNAMIC_ARRAY user_var_events; /* For user variables replication */ MEM_ROOT *user_var_events_alloc; /* Allocate above array elements here */ killed_state volatile killed; /* scramble - random string sent to client on handshake */ char scramble[SCRAMBLE_LENGTH+1]; bool slave_thread, one_shot_set; /* tells if current statement should binlog row-based(1) or stmt-based(0) */ bool current_stmt_binlog_row_based; bool some_tables_deleted; bool last_cuted_field; bool no_errors, password; bool extra_port; /* If extra connection */ /** Set to TRUE if execution of the current compound statement can not continue. In particular, disables activation of CONTINUE or EXIT handlers of stored routines. Reset in the end of processing of the current user request, in @see mysql_reset_thd_for_next_command(). */ bool is_fatal_error; /** Set by a storage engine to request the entire transaction (that possibly spans multiple engines) to rollback. Reset in ha_rollback. */ bool transaction_rollback_request; /** TRUE if we are in a sub-statement and the current error can not be safely recovered until we left the sub-statement mode. In particular, disables activation of CONTINUE and EXIT handlers inside sub-statements. E.g. if it is a deadlock error and requires a transaction-wide rollback, this flag is raised (traditionally, MySQL first has to close all the reads via @see handler::ha_index_or_rnd_end() and only then perform the rollback). Reset to FALSE when we leave the sub-statement mode. */ bool is_fatal_sub_stmt_error; bool query_start_used, rand_used, time_zone_used; bool query_start_sec_part_used; /* for IS NULL => = last_insert_id() fix in remove_eq_conds() */ bool substitute_null_with_insert_id; bool in_lock_tables; /** True if a slave error. Causes the slave to stop. Not the same as the statement execution error (is_error()), since a statement may be expected to return an error, e.g. because it returned an error on master, and this is OK on the slave. */ bool is_slave_error; bool bootstrap, cleanup_done; /** is set if some thread specific value(s) used in a statement. */ bool thread_specific_used; bool charset_is_system_charset, charset_is_collation_connection; bool charset_is_character_set_filesystem; bool enable_slow_log; /* enable slow log for current statement */ bool abort_on_warning; bool got_warning; /* Set on call to push_warning() */ bool no_warnings_for_error; /* no warnings on call to my_error() */ /* set during loop of derived table processing */ bool derived_tables_processing; bool tablespace_op; /* This is TRUE in DISCARD/IMPORT TABLESPACE */ sp_rcontext *spcont; // SP runtime context sp_cache *sp_proc_cache; sp_cache *sp_func_cache; /** number of name_const() substitutions, see sp_head.cc:subst_spvars() */ uint query_name_consts; /* If we do a purge of binary logs, log index info of the threads that are currently reading it needs to be adjusted. To do that each thread that is using LOG_INFO needs to adjust the pointer to it */ LOG_INFO* current_linfo; NET* slave_net; // network connection from slave -> m. /* Used to update global user stats. The global user stats are updated occasionally with the 'diff' variables. After the update, the 'diff' variables are reset to 0. */ /* Time when the current thread connected to MySQL. */ time_t current_connect_time; /* Last time when THD stats were updated in global_user_stats. */ time_t last_global_update_time; /* Number of commands not reflected in global_user_stats yet. */ uint select_commands, update_commands, other_commands; ulonglong start_cpu_time; ulonglong start_bytes_received; /* Used by the sys_var class to store temporary values */ union { my_bool my_bool_value; long long_value; ulong ulong_value; ulonglong ulonglong_value; double double_value; } sys_var_tmp; struct { /* If true, mysql_bin_log::write(Log_event) call will not write events to binlog, and maintain 2 below variables instead (use mysql_bin_log.start_union_events to turn this on) */ bool do_union; /* If TRUE, at least one mysql_bin_log::write(Log_event) call has been made after last mysql_bin_log.start_union_events() call. */ bool unioned_events; /* If TRUE, at least one mysql_bin_log::write(Log_event e), where e.cache_stmt == TRUE call has been made after last mysql_bin_log.start_union_events() call. */ bool unioned_events_trans; /* 'queries' (actually SP statements) that run under inside this binlog union have thd->query_id >= first_query_id. */ query_id_t first_query_id; } binlog_evt_union; /** Internal parser state. Note that since the parser is not re-entrant, we keep only one parser state here. This member is valid only when executing code during parsing. */ Parser_state *m_parser_state; #ifdef WITH_PARTITION_STORAGE_ENGINE partition_info *work_part_info; #endif #if defined(ENABLED_DEBUG_SYNC) /* Debug Sync facility. See debug_sync.cc. */ struct st_debug_sync_control *debug_sync_control; #endif /* defined(ENABLED_DEBUG_SYNC) */ THD(); ~THD(); void init(void); /* Initialize memory roots necessary for query processing and (!) pre-allocate memory for it. We can't do that in THD constructor because there are use cases (acl_init, delayed inserts, watcher threads, killing mysqld) where it's vital to not allocate excessive and not used memory. Note, that we still don't return error from init_for_queries(): if preallocation fails, we should notice that at the first call to alloc_root. */ void init_for_queries(); void update_all_stats(); void update_stats(void); void change_user(void); void cleanup(void); void cleanup_after_query(); bool store_globals(); void reset_globals(); bool restore_globals(); #ifdef SIGNAL_WITH_VIO_CLOSE inline void set_active_vio(Vio* vio) { pthread_mutex_lock(&LOCK_thd_data); active_vio = vio; pthread_mutex_unlock(&LOCK_thd_data); } inline void clear_active_vio() { pthread_mutex_lock(&LOCK_thd_data); active_vio = 0; pthread_mutex_unlock(&LOCK_thd_data); } void close_active_vio(); #endif void awake(killed_state state_to_set); #ifndef MYSQL_CLIENT enum enum_binlog_query_type { /* The query can be logged row-based or statement-based */ ROW_QUERY_TYPE, /* The query has to be logged statement-based */ STMT_QUERY_TYPE, /* The query represents a change to a table in the "mysql" database and is currently mapped to ROW_QUERY_TYPE. */ MYSQL_QUERY_TYPE, QUERY_TYPE_COUNT }; int binlog_query(enum_binlog_query_type qtype, char const *query, ulong query_len, bool is_trans, bool suppress_use, int errcode); #endif /* For enter_cond() / exit_cond() to work the mutex must be got before enter_cond(); this mutex is then released by exit_cond(). Usage must be: lock mutex; enter_cond(); your code; exit_cond(). */ inline const char* enter_cond(pthread_cond_t *cond, pthread_mutex_t* mutex, const char* msg) { const char* old_msg = proc_info; safe_mutex_assert_owner(mutex); mysys_var->current_mutex = mutex; mysys_var->current_cond = cond; proc_info = msg; return old_msg; } inline void exit_cond(const char* old_msg) { /* Putting the mutex unlock in exit_cond() ensures that mysys_var->current_mutex is always unlocked _before_ mysys_var->mutex is locked (if that would not be the case, you'll get a deadlock if someone does a THD::awake() on you). */ pthread_mutex_unlock(mysys_var->current_mutex); pthread_mutex_lock(&mysys_var->mutex); mysys_var->current_mutex = 0; mysys_var->current_cond = 0; proc_info = old_msg; pthread_mutex_unlock(&mysys_var->mutex); } inline my_time_t query_start() { query_start_used=1; return start_time; } inline ulong query_start_sec_part() { query_start_sec_part_used=1; return start_time_sec_part; } inline void set_current_time() { my_hrtime_t hrtime= my_hrtime(); start_time= hrtime_to_my_time(hrtime); start_time_sec_part= hrtime_sec_part(hrtime); } inline void set_time() { if (user_time.val) { start_time= hrtime_to_my_time(user_time); start_time_sec_part= hrtime_sec_part(user_time); } else set_current_time(); start_utime= utime_after_lock= microsecond_interval_timer(); } inline void set_time(my_hrtime_t t) { user_time= t; start_time= hrtime_to_my_time(user_time); start_time_sec_part= hrtime_sec_part(user_time); start_utime= utime_after_lock= microsecond_interval_timer(); } inline void set_time(my_time_t t, ulong sec_part) { my_hrtime_t hrtime= { hrtime_from_time(t) + sec_part }; set_time(hrtime); } void set_time_after_lock() { utime_after_lock= microsecond_interval_timer(); } ulonglong current_utime() { return microsecond_interval_timer(); } inline ulonglong found_rows(void) { return limit_found_rows; } inline bool active_transaction() { #ifdef USING_TRANSACTIONS return server_status & SERVER_STATUS_IN_TRANS; #else return 0; #endif } inline bool fill_derived_tables() { return !stmt_arena->is_stmt_prepare() && !lex->only_view_structure(); } inline bool fill_information_schema_tables() { return !stmt_arena->is_stmt_prepare(); } inline void* trans_alloc(unsigned int size) { return alloc_root(&transaction.mem_root,size); } LEX_STRING *make_lex_string(LEX_STRING *lex_str, const char* str, uint length, bool allocate_lex_string); bool convert_string(LEX_STRING *to, CHARSET_INFO *to_cs, const char *from, uint from_length, CHARSET_INFO *from_cs); bool convert_string(String *s, CHARSET_INFO *from_cs, CHARSET_INFO *to_cs); void add_changed_table(TABLE *table); void add_changed_table(const char *key, long key_length); CHANGED_TABLE_LIST * changed_table_dup(const char *key, long key_length); int send_explain_fields(select_result *result); #ifndef EMBEDDED_LIBRARY /** Clear the current error, if any. We do not clear is_fatal_error or is_fatal_sub_stmt_error since we assume this is never called if the fatal error is set. @todo: To silence an error, one should use Internal_error_handler mechanism. In future this function will be removed. */ inline void clear_error() { DBUG_ENTER("clear_error"); if (main_da.is_error()) main_da.reset_diagnostics_area(); is_slave_error= 0; DBUG_VOID_RETURN; } inline bool vio_ok() const { return net.vio != 0; } #else void clear_error(); inline bool vio_ok() const { return true; } #endif /** Mark the current error as fatal. Warning: this does not set any error, it sets a property of the error, so must be followed or prefixed with my_error(). */ inline void fatal_error() { is_fatal_error= 1; DBUG_PRINT("error",("Fatal error set")); } /** TRUE if there is an error in the error stack. Please use this method instead of direct access to net.report_error. If TRUE, the current (sub)-statement should be aborted. The main difference between this member and is_fatal_error is that a fatal error can not be handled by a stored procedure continue handler, whereas a normal error can. To raise this flag, use my_error(). */ inline bool is_error() const { return main_da.is_error(); } inline CHARSET_INFO *charset() { return variables.character_set_client; } void update_charset(); inline Query_arena *activate_stmt_arena_if_needed(Query_arena *backup) { /* Use the persistent arena if we are in a prepared statement or a stored procedure statement and we have not already changed to use this arena. */ if (!stmt_arena->is_conventional() && mem_root != stmt_arena->mem_root) { set_n_backup_active_arena(stmt_arena, backup); return stmt_arena; } return 0; } void change_item_tree(Item **place, Item *new_value) { /* TODO: check for OOM condition here */ if (!stmt_arena->is_conventional()) nocheck_register_item_tree_change(place, *place, mem_root); *place= new_value; } /** Make change in item tree after checking whether it needs registering @param place place where we should assign new value @param new_value place of the new value @details see check_and_register_item_tree_change details */ void check_and_register_item_tree(Item **place, Item **new_value) { if (!stmt_arena->is_conventional()) check_and_register_item_tree_change(place, new_value, mem_root); /* We have to use memcpy instead of *place= *new_value merge to avoid problems with strict aliasing. */ memcpy((char*) place, new_value, sizeof(*new_value)); } void nocheck_register_item_tree_change(Item **place, Item *old_value, MEM_ROOT *runtime_memroot); void check_and_register_item_tree_change(Item **place, Item **new_value, MEM_ROOT *runtime_memroot); void rollback_item_tree_changes(); /* Cleanup statement parse state (parse tree, lex) and execution state after execution of a non-prepared SQL statement. */ void end_statement(); inline int killed_errno() const { return ::killed_errno(killed); } inline void send_kill_message() const { int err= killed_errno(); if (err) my_message(err, ER(err), MYF(0)); } /* return TRUE if we will abort query if we make a warning now */ inline bool really_abort_on_warning() { return (abort_on_warning && (!transaction.stmt.modified_non_trans_table || (variables.sql_mode & MODE_STRICT_ALL_TABLES))); } void set_status_var_init(); void reset_n_backup_open_tables_state(Open_tables_state *backup); void restore_backup_open_tables_state(Open_tables_state *backup); void reset_sub_statement_state(Sub_statement_state *backup, uint new_state); void restore_sub_statement_state(Sub_statement_state *backup); void set_n_backup_active_arena(Query_arena *set, Query_arena *backup); void restore_active_arena(Query_arena *set, Query_arena *backup); inline void set_current_stmt_binlog_row_based_if_mixed() { /* If in a stored/function trigger, the caller should already have done the change. We test in_sub_stmt to prevent introducing bugs where people wouldn't ensure that, and would switch to row-based mode in the middle of executing a stored function/trigger (which is too late, see also reset_current_stmt_binlog_row_based()); this condition will make their tests fail and so force them to propagate the lex->binlog_row_based_if_mixed upwards to the caller. */ if ((variables.binlog_format == BINLOG_FORMAT_MIXED) && (in_sub_stmt == 0)) current_stmt_binlog_row_based= TRUE; } inline void set_current_stmt_binlog_row_based() { current_stmt_binlog_row_based= TRUE; } inline void clear_current_stmt_binlog_row_based() { current_stmt_binlog_row_based= FALSE; } inline void reset_current_stmt_binlog_row_based() { /* If there are temporary tables, don't reset back to statement-based. Indeed it could be that: CREATE TEMPORARY TABLE t SELECT UUID(); # row-based # and row-based does not store updates to temp tables # in the binlog. INSERT INTO u SELECT * FROM t; # stmt-based and then the INSERT will fail as data inserted into t was not logged. So we continue with row-based until the temp table is dropped. If we are in a stored function or trigger, we mustn't reset in the middle of its execution (as the binary logging way of a stored function or trigger is decided when it starts executing, depending for example on the caller (for a stored function: if caller is SELECT or INSERT/UPDATE/DELETE...). Don't reset binlog format for NDB binlog injector thread. */ DBUG_PRINT("debug", ("temporary_tables: %s, in_sub_stmt: %s, system_thread: %s", YESNO(temporary_tables), YESNO(in_sub_stmt), show_system_thread(system_thread))); if ((temporary_tables == NULL) && (in_sub_stmt == 0) && (system_thread != SYSTEM_THREAD_NDBCLUSTER_BINLOG)) { current_stmt_binlog_row_based= test(variables.binlog_format == BINLOG_FORMAT_ROW); } } /** Set the current database; use deep copy of C-string. @param new_db a pointer to the new database name. @param new_db_len length of the new database name. Initialize the current database from a NULL-terminated string with length. If we run out of memory, we free the current database and return TRUE. This way the user will notice the error as there will be no current database selected (in addition to the error message set by malloc). @note This operation just sets {db, db_length}. Switching the current database usually involves other actions, like switching other database attributes including security context. In the future, this operation will be made private and more convenient interface will be provided. @return Operation status @retval FALSE Success @retval TRUE Out-of-memory error */ bool set_db(const char *new_db, size_t new_db_len) { /* Do not reallocate memory if current chunk is big enough. */ if (db && new_db && db_length >= new_db_len) memcpy(db, new_db, new_db_len+1); else { x_free(db); db= new_db ? my_strndup(new_db, new_db_len, MYF(MY_WME)) : NULL; } db_length= db ? new_db_len : 0; return new_db && !db; } /** Set the current database; use shallow copy of C-string. @param new_db a pointer to the new database name. @param new_db_len length of the new database name. @note This operation just sets {db, db_length}. Switching the current database usually involves other actions, like switching other database attributes including security context. In the future, this operation will be made private and more convenient interface will be provided. */ void reset_db(char *new_db, size_t new_db_len) { db= new_db; db_length= new_db_len; } /* Copy the current database to the argument. Use the current arena to allocate memory for a deep copy: current database may be freed after a statement is parsed but before it's executed. */ bool copy_db_to(char **p_db, size_t *p_db_length) { if (db == NULL) { my_message(ER_NO_DB_ERROR, ER(ER_NO_DB_ERROR), MYF(0)); return TRUE; } *p_db= strmake(db, db_length); *p_db_length= db_length; return FALSE; } thd_scheduler event_scheduler; public: inline Internal_error_handler *get_internal_handler() { return m_internal_handler; } /** Add an internal error handler to the thread execution context. @param handler the exception handler to add */ void push_internal_handler(Internal_error_handler *handler); /** Handle an error condition. @param sql_errno the error number @param level the error level @return true if the error is handled */ virtual bool handle_error(uint sql_errno, const char *message, MYSQL_ERROR::enum_warning_level level); /** Remove the error handler last pushed. */ Internal_error_handler *pop_internal_handler(); /** Overloaded to guard query/query_length fields */ virtual void set_statement(Statement *stmt); /** Assign a new value to thd->query. Protected with LOCK_thd_data mutex. */ void set_query(char *query_arg, uint32 query_length_arg); void binlog_invoker() { m_binlog_invoker= TRUE; } bool need_binlog_invoker() { return m_binlog_invoker; } void get_definer(LEX_USER *definer); void set_invoker(const LEX_STRING *user, const LEX_STRING *host) { invoker_user= *user; invoker_host= *host; } LEX_STRING get_invoker_user() { return invoker_user; } LEX_STRING get_invoker_host() { return invoker_host; } bool has_invoker() { return invoker_user.length > 0; } private: /* This reference points to the table arena when the expression for a virtual column is being evaluated */ Query_arena *arena_for_cached_items; public: void reset_arena_for_cached_items(Query_arena *new_arena) { arena_for_cached_items= new_arena; } Query_arena *switch_to_arena_for_cached_items(Query_arena *backup) { if (!arena_for_cached_items) return 0; set_n_backup_active_arena(arena_for_cached_items, backup); return backup; } void clear_wakeup_ready() { wakeup_ready= false; } /* Sleep waiting for others to wake us up with signal_wakeup_ready(). Must call clear_wakeup_ready() before waiting. */ void wait_for_wakeup_ready(); /* Wake this thread up from wait_for_wakeup_ready(). */ void signal_wakeup_ready(); private: /** The current internal error handler for this thread, or NULL. */ Internal_error_handler *m_internal_handler; /** The lex to hold the parsed tree of conventional (non-prepared) queries. Whereas for prepared and stored procedure statements we use an own lex instance for each new query, for conventional statements we reuse the same lex. (@see mysql_parse for details). */ LEX main_lex; /** This memory root is used for two purposes: - for conventional queries, to allocate structures stored in main_lex during parsing, and allocate runtime data (execution plan, etc.) during execution. - for prepared queries, only to allocate runtime data. The parsed tree itself is reused between executions and thus is stored elsewhere. */ MEM_ROOT main_mem_root; /** It will be set TURE if CURRENT_USER() is called in account management statements or default definer is set in CREATE/ALTER SP, SF, Event, TRIGGER or VIEW statements. Current user will be binlogged into Query_log_event if m_binlog_invoker is TRUE; It will be stored into invoker_host and invoker_user by SQL thread. */ bool m_binlog_invoker; /** It points to the invoker in the Query_log_event. SQL thread use it as the default definer in CREATE/ALTER SP, SF, Event, TRIGGER or VIEW statements or current user in account management statements if it is not NULL. */ LEX_STRING invoker_user; LEX_STRING invoker_host; /* Flag, mutex and condition for a thread to wait for a signal from another thread. Currently used to wait for group commit to complete, can also be used for other purposes. */ bool wakeup_ready; pthread_mutex_t LOCK_wakeup_ready; pthread_cond_t COND_wakeup_ready; }; /** A short cut for thd->main_da.set_ok_status(). */ inline void my_ok(THD *thd, ha_rows affected_rows= 0, ulonglong id= 0, const char *message= NULL) { thd->main_da.set_ok_status(thd, affected_rows, id, message); } /** A short cut for thd->main_da.set_eof_status(). */ inline void my_eof(THD *thd) { thd->main_da.set_eof_status(thd); } #define tmp_disable_binlog(A) \ {ulonglong tmp_disable_binlog__save_options= (A)->options; \ (A)->options&= ~OPTION_BIN_LOG #define reenable_binlog(A) (A)->options= tmp_disable_binlog__save_options;} /* These functions are for making it later easy to add strict checking for all date handling. */ extern my_bool strict_date_checking; inline ulong sql_mode_for_dates(THD *thd) { if (unlikely(strict_date_checking)) return (thd->variables.sql_mode & (MODE_NO_ZERO_DATE | MODE_NO_ZERO_IN_DATE | MODE_INVALID_DATES)); return (thd->variables.sql_mode & MODE_INVALID_DATES); } inline ulong sql_mode_for_dates() { return sql_mode_for_dates(current_thd); } /* Used to hold information about file and file structure in exchange via non-DB file (...INTO OUTFILE..., ...LOAD DATA...) XXX: We never call destructor for objects of this class. */ class sql_exchange :public Sql_alloc { public: char *file_name; String *field_term,*enclosed,*line_term,*line_start,*escaped; bool opt_enclosed; bool dumpfile; ulong skip_lines; CHARSET_INFO *cs; sql_exchange(char *name,bool dumpfile_flag); bool escaped_given(void); }; #include "log_event.h" /* This is used to get result from a select */ class JOIN; class select_result :public Sql_alloc { protected: THD *thd; SELECT_LEX_UNIT *unit; int nest_level; public: select_result(); virtual ~select_result() {}; virtual int prepare(List &list, SELECT_LEX_UNIT *u) { unit= u; return 0; } virtual int prepare2(void) { return 0; } /* Because of peculiarities of prepared statements protocol we need to know number of columns in the result set (if there is a result set) apart from sending columns metadata. */ virtual uint field_count(List &fields) const { return fields.elements; } virtual bool send_fields(List &list, uint flags)=0; /* send_data returns 0 on ok, 1 on error and -1 if data was ignored, for example for a duplicate row entry written to a temp table. */ virtual int send_data(List &items)=0; virtual bool initialize_tables (JOIN *join=0) { return 0; } virtual void send_error(uint errcode,const char *err); virtual bool send_eof()=0; /** Check if this query returns a result set and therefore is allowed in cursors and set an error message if it is not the case. @retval FALSE success @retval TRUE error, an error message is set */ virtual bool check_simple_select() const; virtual void abort() {} /* Cleanup instance of this class for next execution of a prepared statement/stored procedure. */ virtual void cleanup(); void set_thd(THD *thd_arg) { thd= thd_arg; } /** The nest level, if supported. @return -1 if nest level is undefined, otherwise a positive integer. */ int get_nest_level() { return (int) nest_level; } #ifdef EMBEDDED_LIBRARY virtual void begin_dataset() {} #else void begin_dataset() {} #endif }; /* Base class for select_result descendands which intercept and transform result set rows. As the rows are not sent to the client, sending of result set metadata should be suppressed as well. */ class select_result_interceptor: public select_result { public: select_result_interceptor() { DBUG_ENTER("select_result_interceptor::select_result_interceptor"); DBUG_PRINT("enter", ("this 0x%lx", (ulong) this)); DBUG_VOID_RETURN; } /* Remove gcc warning */ uint field_count(List &fields) const { return 0; } bool send_fields(List &fields, uint flag) { return FALSE; } }; class select_send :public select_result { /** True if we have sent result set metadata to the client. In this case the client always expects us to end the result set with an eof or error packet */ bool is_result_set_started; public: select_send() :is_result_set_started(FALSE) {} bool send_fields(List &list, uint flags); int send_data(List &items); bool send_eof(); virtual bool check_simple_select() const { return FALSE; } void abort(); virtual void cleanup(); }; class select_to_file :public select_result_interceptor { protected: sql_exchange *exchange; File file; IO_CACHE cache; ha_rows row_count; char path[FN_REFLEN]; public: select_to_file(sql_exchange *ex) :exchange(ex), file(-1),row_count(0L) { path[0]=0; } ~select_to_file(); void send_error(uint errcode,const char *err); bool send_eof(); void cleanup(); }; #define ESCAPE_CHARS "ntrb0ZN" // keep synchronous with READ_INFO::unescape /* List of all possible characters of a numeric value text representation. */ #define NUMERIC_CHARS ".0123456789e+-" class select_export :public select_to_file { uint field_term_length; int field_sep_char,escape_char,line_sep_char; int field_term_char; // first char of FIELDS TERMINATED BY or MAX_INT /* The is_ambiguous_field_sep field is true if a value of the field_sep_char field is one of the 'n', 't', 'r' etc characters (see the READ_INFO::unescape method and the ESCAPE_CHARS constant value). */ bool is_ambiguous_field_sep; /* The is_ambiguous_field_term is true if field_sep_char contains the first char of the FIELDS TERMINATED BY (ENCLOSED BY is empty), and items can contain this character. */ bool is_ambiguous_field_term; /* The is_unsafe_field_sep field is true if a value of the field_sep_char field is one of the '0'..'9', '+', '-', '.' and 'e' characters (see the NUMERIC_CHARS constant value). */ bool is_unsafe_field_sep; bool fixed_row_size; CHARSET_INFO *write_cs; // output charset public: select_export(sql_exchange *ex) :select_to_file(ex) {} /** Creates a select_export to represent INTO OUTFILE with a defined level of subquery nesting. */ select_export(sql_exchange *ex, int nest_level_arg) :select_to_file(ex) { nest_level= nest_level_arg; } ~select_export(); int prepare(List &list, SELECT_LEX_UNIT *u); int send_data(List &items); }; class select_dump :public select_to_file { public: select_dump(sql_exchange *ex) :select_to_file(ex) {} /** Creates a select_export to represent INTO DUMPFILE with a defined level of subquery nesting. */ select_dump(sql_exchange *ex, int nest_level_arg) : select_to_file(ex) { nest_level= nest_level_arg; } int prepare(List &list, SELECT_LEX_UNIT *u); int send_data(List &items); }; class select_insert :public select_result_interceptor { protected: virtual int write_to_binlog(bool is_trans, int errcode); public: TABLE_LIST *table_list; TABLE *table; List *fields; ulonglong autoinc_value_of_last_inserted_row; // autogenerated or not COPY_INFO info; bool insert_into_view; select_insert(TABLE_LIST *table_list_par, TABLE *table_par, List *fields_par, List *update_fields, List *update_values, enum_duplicates duplic, bool ignore); ~select_insert(); int prepare(List &list, SELECT_LEX_UNIT *u); virtual int prepare2(void); virtual int send_data(List &items); virtual void store_values(List &values); virtual bool can_rollback_data() { return 0; } void send_error(uint errcode,const char *err); bool send_eof(); void abort(); /* not implemented: select_insert is never re-used in prepared statements */ void cleanup(); }; class select_create: public select_insert { ORDER *group; TABLE_LIST *create_table; HA_CREATE_INFO *create_info; TABLE_LIST *select_tables; Alter_info *alter_info; Field **field; /* lock data for tmp table */ MYSQL_LOCK *m_lock; /* m_lock or thd->extra_lock */ MYSQL_LOCK **m_plock; virtual int write_to_binlog(bool is_trans, int errcode); public: select_create (TABLE_LIST *table_arg, HA_CREATE_INFO *create_info_par, Alter_info *alter_info_arg, List &select_fields,enum_duplicates duplic, bool ignore, TABLE_LIST *select_tables_arg) :select_insert (NULL, NULL, &select_fields, 0, 0, duplic, ignore), create_table(table_arg), create_info(create_info_par), select_tables(select_tables_arg), alter_info(alter_info_arg), m_plock(NULL) {} int prepare(List &list, SELECT_LEX_UNIT *u); int binlog_show_create_table(TABLE **tables, uint count, int errcode); void store_values(List &values); void send_error(uint errcode,const char *err); bool send_eof(); void abort(); virtual bool can_rollback_data() { return 1; } // Needed for access from local class MY_HOOKS in prepare(), since thd is proteted. const THD *get_thd(void) { return thd; } const HA_CREATE_INFO *get_create_info() { return create_info; }; int prepare2(void) { return 0; } }; #if defined(WITH_ARIA_STORAGE_ENGINE) && defined(USE_MARIA_FOR_TMP_TABLES) #include #define ENGINE_COLUMNDEF MARIA_COLUMNDEF #else #include #define ENGINE_COLUMNDEF MI_COLUMNDEF #endif /* Param to create temporary tables when doing SELECT:s NOTE This structure is copied using memcpy as a part of JOIN. */ class TMP_TABLE_PARAM :public Sql_alloc { private: /* Prevent use of these (not safe because of lists and copy_field) */ TMP_TABLE_PARAM(const TMP_TABLE_PARAM &); void operator=(TMP_TABLE_PARAM &); public: List copy_funcs; List save_copy_funcs; Copy_field *copy_field, *copy_field_end; Copy_field *save_copy_field, *save_copy_field_end; uchar *group_buff; Item **items_to_copy; /* Fields in tmp table */ ENGINE_COLUMNDEF *recinfo, *start_recinfo; KEY *keyinfo; ha_rows end_write_records; /** Number of normal fields in the query, including those referred to from aggregate functions. Hence, "SELECT `field1`, SUM(`field2`) from t1" sets this counter to 2. @see count_field_types */ uint field_count; /** Number of fields in the query that have functions. Includes both aggregate functions (e.g., SUM) and non-aggregates (e.g., RAND). Also counts functions referred to from aggregate functions, i.e., "SELECT SUM(RAND())" sets this counter to 2. @see count_field_types */ uint func_count; /** Number of fields in the query that have aggregate functions. Note that the optimizer may choose to optimize away these fields by replacing them with constants, in which case sum_func_count will need to be updated. @see opt_sum_query, count_field_types */ uint sum_func_count; uint hidden_field_count; uint group_parts,group_length,group_null_parts; uint quick_group; bool using_indirect_summary_function; /* If >0 convert all blob fields to varchar(convert_blob_length) */ uint convert_blob_length; CHARSET_INFO *table_charset; bool schema_table; /* TRUE if the temp table is created for subquery materialization. */ bool materialized_subquery; /* True if GROUP BY and its aggregate functions are already computed by a table access method (e.g. by loose index scan). In this case query execution should not perform aggregation and should treat aggregate functions as normal functions. */ bool precomputed_group_by; bool force_copy_fields; /* If TRUE, create_tmp_field called from create_tmp_table will convert all BIT fields to 64-bit longs. This is a workaround the limitation that MEMORY tables cannot index BIT columns. */ bool bit_fields_as_long; /* Whether to create or postpone actual creation of this temporary table. TRUE <=> create_tmp_table will create only the TABLE structure. */ bool skip_create_table; TMP_TABLE_PARAM() :copy_field(0), group_parts(0), group_length(0), group_null_parts(0), convert_blob_length(0), schema_table(0), materialized_subquery(0), precomputed_group_by(0), force_copy_fields(0), bit_fields_as_long(0), skip_create_table(0) {} ~TMP_TABLE_PARAM() { cleanup(); } void init(void); inline void cleanup(void) { if (copy_field) /* Fix for Intel compiler */ { delete [] copy_field; save_copy_field= copy_field= 0; } } }; class select_union :public select_result_interceptor { public: TMP_TABLE_PARAM tmp_table_param; int write_err; /* Error code from the last send_data->ha_write_row call. */ public: TABLE *table; ha_rows records; select_union() :write_err(0), table(0), records(0) { tmp_table_param.init(); } int prepare(List &list, SELECT_LEX_UNIT *u); int send_data(List &items); bool send_eof(); bool flush(); void cleanup(); virtual bool create_result_table(THD *thd, List *column_types, bool is_distinct, ulonglong options, const char *alias, bool bit_fields_as_long, bool create_table); TMP_TABLE_PARAM *get_tmp_table_param() { return &tmp_table_param; } }; /* Base subselect interface class */ class select_subselect :public select_result_interceptor { protected: Item_subselect *item; public: select_subselect(Item_subselect *item); int send_data(List &items)=0; bool send_eof() { return 0; }; }; /* Single value subselect interface class */ class select_singlerow_subselect :public select_subselect { public: select_singlerow_subselect(Item_subselect *item_arg) :select_subselect(item_arg) {} int send_data(List &items); }; /* This class specializes select_union to collect statistics about the data stored in the temp table. Currently the class collects statistcs about NULLs. */ class select_materialize_with_stats : public select_union { protected: class Column_statistics { public: /* Count of NULLs per column. */ ha_rows null_count; /* The row number that contains the first NULL in a column. */ ha_rows min_null_row; /* The row number that contains the last NULL in a column. */ ha_rows max_null_row; }; /* Array of statistics data per column. */ Column_statistics* col_stat; /* The number of columns in the biggest sub-row that consists of only NULL values. */ uint max_nulls_in_row; /* Count of rows writtent to the temp table. This is redundant as it is already stored in handler::stats.records, however that one is relatively expensive to compute (given we need that for evry row). */ ha_rows count_rows; protected: void reset(); public: select_materialize_with_stats() { tmp_table_param.init(); } bool create_result_table(THD *thd, List *column_types, bool is_distinct, ulonglong options, const char *alias, bool bit_fields_as_long, bool create_table); bool init_result_table(ulonglong select_options); int send_data(List &items); void cleanup(); ha_rows get_null_count_of_col(uint idx) { DBUG_ASSERT(idx < table->s->fields); return col_stat[idx].null_count; } ha_rows get_max_null_of_col(uint idx) { DBUG_ASSERT(idx < table->s->fields); return col_stat[idx].max_null_row; } ha_rows get_min_null_of_col(uint idx) { DBUG_ASSERT(idx < table->s->fields); return col_stat[idx].min_null_row; } uint get_max_nulls_in_row() { return max_nulls_in_row; } }; /* used in independent ALL/ANY optimisation */ class select_max_min_finder_subselect :public select_subselect { Item_cache *cache; bool (select_max_min_finder_subselect::*op)(); bool fmax; bool is_all; public: select_max_min_finder_subselect(Item_subselect *item_arg, bool mx, bool all) :select_subselect(item_arg), cache(0), fmax(mx), is_all(all) {} void cleanup(); int send_data(List &items); bool cmp_real(); bool cmp_int(); bool cmp_decimal(); bool cmp_str(); }; /* EXISTS subselect interface class */ class select_exists_subselect :public select_subselect { public: select_exists_subselect(Item_subselect *item_arg) :select_subselect(item_arg){} int send_data(List &items); }; /* Optimizer and executor structure for the materialized semi-join info. This structure contains - The sj-materialization temporary table - Members needed to make index lookup or a full scan of the temptable. */ class SJ_MATERIALIZATION_INFO : public Sql_alloc { public: /* Optimal join sub-order */ struct st_position *positions; uint tables; /* Number of tables in the sj-nest */ /* Expected #rows in the materialized table */ double rows; /* Cost to materialize - execute the sub-join and write rows into temp.table */ COST_VECT materialization_cost; /* Cost to make one lookup in the temptable */ COST_VECT lookup_cost; /* Cost of scanning the materialized table */ COST_VECT scan_cost; /* --- Execution structures ---------- */ /* TRUE <=> This structure is used for execution. We don't necessarily pick sj-materialization, so some of SJ_MATERIALIZATION_INFO structures are not used by materialization */ bool is_used; bool materialized; /* TRUE <=> materialization already performed */ /* TRUE - the temptable is read with full scan FALSE - we use the temptable for index lookups */ bool is_sj_scan; /* The temptable and its related info */ TMP_TABLE_PARAM sjm_table_param; List sjm_table_cols; TABLE *table; /* Structure used to make index lookups */ struct st_table_ref *tab_ref; Item *in_equality; /* See create_subq_in_equalities() */ Item *join_cond; /* See comments in make_join_select() */ Copy_field *copy_field; /* Needed for SJ_Materialization scan */ }; /* Structs used when sorting */ typedef struct st_sort_field { Field *field; /* Field to sort */ Item *item; /* Item if not sorting fields */ uint length; /* Length of sort field */ uint suffix_length; /* Length suffix (0-4) */ Item_result result_type; /* Type of item */ bool reverse; /* if descending sort */ bool need_strxnfrm; /* If we have to use strxnfrm() */ } SORT_FIELD; typedef struct st_sort_buffer { uint index; /* 0 or 1 */ uint sort_orders; uint change_pos; /* If sort-fields changed */ char **buff; SORT_FIELD *sortorder; } SORT_BUFFER; /* Structure for db & table in sql_yacc */ class Table_ident :public Sql_alloc { public: LEX_STRING db; LEX_STRING table; SELECT_LEX_UNIT *sel; inline Table_ident(THD *thd, LEX_STRING db_arg, LEX_STRING table_arg, bool force) :table(table_arg), sel((SELECT_LEX_UNIT *)0) { if (!force && (thd->client_capabilities & CLIENT_NO_SCHEMA)) db.str=0; else db= db_arg; } inline Table_ident(LEX_STRING table_arg) :table(table_arg), sel((SELECT_LEX_UNIT *)0) { db.str=0; } /* This constructor is used only for the case when we create a derived table. A derived table has no name and doesn't belong to any database. Later, if there was an alias specified for the table, it will be set by add_table_to_list. */ inline Table_ident(SELECT_LEX_UNIT *s) : sel(s) { /* We must have a table name here as this is used with add_table_to_list */ db.str= empty_c_string; /* a subject to casedn_str */ db.length= 0; table.str= internal_table_name; table.length=1; } bool is_derived_table() const { return test(sel); } inline void change_db(char *db_name) { db.str= db_name; db.length= (uint) strlen(db_name); } }; // this is needed for user_vars hash class user_var_entry { public: user_var_entry() {} /* Remove gcc warning */ LEX_STRING name; char *value; ulong length; query_id_t update_query_id, used_query_id; Item_result type; bool unsigned_flag; double val_real(bool *null_value); longlong val_int(bool *null_value) const; String *val_str(bool *null_value, String *str, uint decimals); my_decimal *val_decimal(bool *null_value, my_decimal *result); DTCollation collation; }; /* Unique -- class for unique (removing of duplicates). Puts all values to the TREE. If the tree becomes too big, it's dumped to the file. User can request sorted values, or just iterate through them. In the last case tree merging is performed in memory simultaneously with iteration, so it should be ~2-3x faster. */ class Unique :public Sql_alloc { DYNAMIC_ARRAY file_ptrs; ulong max_elements; ulonglong max_in_memory_size; IO_CACHE file; TREE tree; uchar *record_pointers; ulong filtered_out_elems; bool flush(); uint size; uint full_size; uint min_dupl_count; /* always 0 for unions, > 0 for intersections */ public: ulong elements; Unique(qsort_cmp2 comp_func, void *comp_func_fixed_arg, uint size_arg, ulonglong max_in_memory_size_arg, uint min_dupl_count_arg= 0); ~Unique(); ulong elements_in_tree() { return tree.elements_in_tree; } inline bool unique_add(void *ptr) { DBUG_ENTER("unique_add"); DBUG_PRINT("info", ("tree %u - %lu", tree.elements_in_tree, max_elements)); if (!(tree.flag & TREE_ONLY_DUPS) && tree.elements_in_tree >= max_elements && flush()) DBUG_RETURN(1); DBUG_RETURN(!tree_insert(&tree, ptr, 0, tree.custom_arg)); } bool is_in_memory() { return (my_b_tell(&file) == 0); } void close_for_expansion() { tree.flag= TREE_ONLY_DUPS; } bool get(TABLE *table); /* Cost of searching for an element in the tree */ inline static double get_search_cost(ulonglong tree_elems, uint compare_factor) { return log((double) tree_elems) / (compare_factor * M_LN2); } static double get_use_cost(uint *buffer, size_t nkeys, uint key_size, ulonglong max_in_memory_size, uint compare_factor, bool intersect_fl, bool *in_memory); inline static int get_cost_calc_buff_size(size_t nkeys, uint key_size, ulonglong max_in_memory_size) { register ulonglong max_elems_in_tree= max_in_memory_size / ALIGN_SIZE(sizeof(TREE_ELEMENT)+key_size); return (int) (sizeof(uint)*(1 + nkeys/max_elems_in_tree)); } void reset(); bool walk(tree_walk_action action, void *walk_action_arg); uint get_size() const { return size; } ulonglong get_max_in_memory_size() const { return max_in_memory_size; } friend int unique_write_to_file(uchar* key, element_count count, Unique *unique); friend int unique_write_to_ptrs(uchar* key, element_count count, Unique *unique); friend int unique_write_to_file_with_count(uchar* key, element_count count, Unique *unique); friend int unique_intersect_write_to_ptrs(uchar* key, element_count count, Unique *unique); }; class multi_delete :public select_result_interceptor { TABLE_LIST *delete_tables, *table_being_deleted; Unique **tempfiles; ha_rows deleted, found; uint num_of_tables; int error; bool do_delete; /* True if at least one table we delete from is transactional */ bool transactional_tables; /* True if at least one table we delete from is not transactional */ bool normal_tables; bool delete_while_scanning; /* error handling (rollback and binlogging) can happen in send_eof() so that afterward send_error() needs to find out that. */ bool error_handled; public: multi_delete(TABLE_LIST *dt, uint num_of_tables); ~multi_delete(); int prepare(List &list, SELECT_LEX_UNIT *u); int send_data(List &items); bool initialize_tables (JOIN *join); void send_error(uint errcode,const char *err); int do_deletes(); int do_table_deletes(TABLE *table, bool ignore); bool send_eof(); virtual void abort(); }; class multi_update :public select_result_interceptor { TABLE_LIST *all_tables; /* query/update command tables */ List *leaves; /* list of leves of join table tree */ TABLE_LIST *update_tables, *table_being_updated; TABLE **tmp_tables, *main_table, *table_to_update; TMP_TABLE_PARAM *tmp_table_param; ha_rows updated, found; List *fields, *values; List **fields_for_table, **values_for_table; uint table_count; /* List of tables referenced in the CHECK OPTION condition of the updated view excluding the updated table. */ List unupdated_check_opt_tables; Copy_field *copy_field; enum enum_duplicates handle_duplicates; bool do_update, trans_safe; /* True if the update operation has made a change in a transactional table */ bool transactional_tables; bool ignore; /* error handling (rollback and binlogging) can happen in send_eof() so that afterward send_error() needs to find out that. */ bool error_handled; public: multi_update(TABLE_LIST *ut, List *leaves_list, List *fields, List *values, enum_duplicates handle_duplicates, bool ignore); ~multi_update(); int prepare(List &list, SELECT_LEX_UNIT *u); int send_data(List &items); bool initialize_tables (JOIN *join); void send_error(uint errcode,const char *err); int do_updates(); bool send_eof(); virtual void abort(); }; class my_var : public Sql_alloc { public: LEX_STRING s; #ifndef DBUG_OFF /* Routine to which this Item_splocal belongs. Used for checking if correct runtime context is used for variable handling. */ sp_head *sp; #endif bool local; uint offset; enum_field_types type; my_var (LEX_STRING& j, bool i, uint o, enum_field_types t) :s(j), local(i), offset(o), type(t) {} ~my_var() {} }; class select_dumpvar :public select_result_interceptor { ha_rows row_count; public: List var_list; select_dumpvar() { var_list.empty(); row_count= 0;} /** Creates a select_dumpvar to represent INTO with a defined level of subquery nesting. */ select_dumpvar(int nest_level_arg) { var_list.empty(); row_count= 0; nest_level= nest_level_arg; } ~select_dumpvar() {} int prepare(List &list, SELECT_LEX_UNIT *u); int send_data(List &items); bool send_eof(); virtual bool check_simple_select() const; void cleanup(); }; /* Bits in sql_command_flags */ #define CF_CHANGES_DATA 1 #define CF_HAS_ROW_COUNT 2 #define CF_STATUS_COMMAND 4 #define CF_SHOW_TABLE_COMMAND 8 #define CF_WRITE_LOGS_COMMAND 16 /** Must be set for SQL statements that may contain Item expressions and/or use joins and tables. Indicates that the parse tree of such statement may contain rule-based optimizations that depend on metadata (i.e. number of columns in a table), and consequently that the statement must be re-prepared whenever referenced metadata changes. Must not be set for statements that themselves change metadata, e.g. RENAME, ALTER and other DDL, since otherwise will trigger constant reprepare. Consequently, complex item expressions and joins are currently prohibited in these statements. */ #define CF_REEXECUTION_FRAGILE 32 #define CF_REPORT_PROGRESS 64 /* Functions in sql_class.cc */ void add_to_status(STATUS_VAR *to_var, STATUS_VAR *from_var); void add_diff_to_status(STATUS_VAR *to_var, STATUS_VAR *from_var, STATUS_VAR *dec_var); void mark_transaction_to_rollback(THD *thd, bool all); /* inline handler methods that need to know TABLE and THD structures */ inline void handler::increment_statistics(ulong SSV::*offset) const { status_var_increment(table->in_use->status_var.*offset); } inline void handler::decrement_statistics(ulong SSV::*offset) const { status_var_decrement(table->in_use->status_var.*offset); } inline int handler::ha_index_read_map(uchar * buf, const uchar * key, key_part_map keypart_map, enum ha_rkey_function find_flag) { DBUG_ASSERT(inited==INDEX); increment_statistics(&SSV::ha_read_key_count); int error= index_read_map(buf, key, keypart_map, find_flag); if (!error) update_index_statistics(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } /* @note: Other index lookup/navigation functions require prior handler->index_init() call. This function is different, it requires that the scan is not initialized, and accepts "uint index" as an argument. */ inline int handler::ha_index_read_idx_map(uchar * buf, uint index, const uchar * key, key_part_map keypart_map, enum ha_rkey_function find_flag) { DBUG_ASSERT(inited==NONE); increment_statistics(&SSV::ha_read_key_count); int error= index_read_idx_map(buf, index, key, keypart_map, find_flag); if (!error) { update_rows_read(); index_rows_read[index]++; } table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_index_next(uchar * buf) { DBUG_ASSERT(inited==INDEX); increment_statistics(&SSV::ha_read_next_count); int error= index_next(buf); if (!error) update_index_statistics(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_index_prev(uchar * buf) { DBUG_ASSERT(inited==INDEX); increment_statistics(&SSV::ha_read_prev_count); int error= index_prev(buf); if (!error) update_index_statistics(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_index_first(uchar * buf) { DBUG_ASSERT(inited==INDEX); increment_statistics(&SSV::ha_read_first_count); int error= index_first(buf); if (!error) update_index_statistics(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_index_last(uchar * buf) { DBUG_ASSERT(inited==INDEX); increment_statistics(&SSV::ha_read_last_count); int error= index_last(buf); if (!error) update_index_statistics(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_index_next_same(uchar *buf, const uchar *key, uint keylen) { DBUG_ASSERT(inited==INDEX); increment_statistics(&SSV::ha_read_next_count); int error= index_next_same(buf, key, keylen); if (!error) update_index_statistics(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_ft_read(uchar *buf) { int error= ft_read(buf); if (!error) update_rows_read(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_rnd_next(uchar *buf) { increment_statistics(&SSV::ha_read_rnd_next_count); int error= rnd_next(buf); if (!error) update_rows_read(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_rnd_pos(uchar *buf, uchar *pos) { increment_statistics(&SSV::ha_read_rnd_count); int error= rnd_pos(buf, pos); if (!error) update_rows_read(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_rnd_pos_by_record(uchar *buf) { int error= rnd_pos_by_record(buf); if (!error) update_rows_read(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_read_first_row(uchar *buf, uint primary_key) { int error= read_first_row(buf, primary_key); if (!error) update_rows_read(); table->status=error ? STATUS_NOT_FOUND: 0; return error; } inline int handler::ha_write_tmp_row(uchar *buf) { increment_statistics(&SSV::ha_tmp_write_count); return write_row(buf); } inline int handler::ha_update_tmp_row(const uchar *old_data, uchar *new_data) { increment_statistics(&SSV::ha_tmp_update_count); return update_row(old_data, new_data); } #endif /* MYSQL_SERVER */