/* Copyright (C) 2004 MySQL AB This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* Most of the following code and structures were derived from public domain code from ftp://elsie.nci.nih.gov/pub (We will refer to this code as to elsie-code further.) */ /* We should not include mysql_priv.h in mysql_tzinfo_to_sql utility since it creates unsolved link dependencies on some platforms. */ #ifdef USE_PRAGMA_IMPLEMENTATION #pragma implementation // gcc: Class implementation #endif #include #if !defined(TZINFO2SQL) && !defined(TESTTIME) #include "mysql_priv.h" #else #include #include "tztime.h" #include #endif #include "tzfile.h" #include #include /* Now we don't use abbreviations in server but we will do this in future. */ #if defined(TZINFO2SQL) || defined(TESTTIME) #define ABBR_ARE_USED #else #if !defined(DBUG_OFF) /* Let use abbreviations for debug purposes */ #undef ABBR_ARE_USED #define ABBR_ARE_USED #endif /* !defined(DBUG_OFF) */ #endif /* defined(TZINFO2SQL) || defined(TESTTIME) */ /* Structure describing local time type (e.g. Moscow summer time (MSD)) */ typedef struct ttinfo { long tt_gmtoff; // Offset from UTC in seconds uint tt_isdst; // Is daylight saving time or not. Used to set tm_isdst #ifdef ABBR_ARE_USED uint tt_abbrind; // Index of start of abbreviation for this time type. #endif /* We don't use tt_ttisstd and tt_ttisgmt members of original elsie-code struct since we don't support POSIX-style TZ descriptions in variables. */ } TRAN_TYPE_INFO; /* Structure describing leap-second corrections. */ typedef struct lsinfo { my_time_t ls_trans; // Transition time long ls_corr; // Correction to apply } LS_INFO; /* Structure with information describing ranges of my_time_t shifted to local time (my_time_t + offset). Used for local TIME -> my_time_t conversion. See comments for TIME_to_gmt_sec() for more info. */ typedef struct revtinfo { long rt_offset; // Offset of local time from UTC in seconds uint rt_type; // Type of period 0 - Normal period. 1 - Spring time-gap } REVT_INFO; #ifdef TZNAME_MAX #define MY_TZNAME_MAX TZNAME_MAX #endif #ifndef TZNAME_MAX #define MY_TZNAME_MAX 255 #endif /* Structure which fully describes time zone which is described in our db or in zoneinfo files. */ typedef struct st_time_zone_info { uint leapcnt; // Number of leap-second corrections uint timecnt; // Number of transitions between time types uint typecnt; // Number of local time types uint charcnt; // Number of characters used for abbreviations uint revcnt; // Number of transition descr. for TIME->my_time_t conversion /* The following are dynamical arrays are allocated in MEM_ROOT */ my_time_t *ats; // Times of transitions between time types unsigned char *types; // Local time types for transitions TRAN_TYPE_INFO *ttis; // Local time types descriptions #ifdef ABBR_ARE_USED /* Storage for local time types abbreviations. They are stored as ASCIIZ */ char *chars; #endif /* Leap seconds corrections descriptions, this array is shared by all time zones who use leap seconds. */ LS_INFO *lsis; /* Starting points and descriptions of shifted my_time_t (my_time_t + offset) ranges on which shifted my_time_t -> my_time_t mapping is linear or undefined. Used for tm -> my_time_t conversion. */ my_time_t *revts; REVT_INFO *revtis; /* Time type which is used for times smaller than first transition or if there are no transitions at all. */ TRAN_TYPE_INFO *fallback_tti; } TIME_ZONE_INFO; static my_bool prepare_tz_info(TIME_ZONE_INFO *sp, MEM_ROOT *storage); #if defined(TZINFO2SQL) || defined(TESTTIME) /* Load time zone description from zoneinfo (TZinfo) file. SYNOPSIS tz_load() name - path to zoneinfo file sp - TIME_ZONE_INFO structure to fill RETURN VALUES 0 - Ok 1 - Error */ static my_bool tz_load(const char *name, TIME_ZONE_INFO *sp, MEM_ROOT *storage) { char *p; int read_from_file; uint i; FILE *file; if (!(file= my_fopen(name, O_RDONLY|O_BINARY, MYF(MY_WME)))) return 1; { union { struct tzhead tzhead; char buf[sizeof(struct tzhead) + sizeof(my_time_t) * TZ_MAX_TIMES + TZ_MAX_TIMES + sizeof(TRAN_TYPE_INFO) * TZ_MAX_TYPES + #ifdef ABBR_ARE_USED max(TZ_MAX_CHARS + 1, (2 * (MY_TZNAME_MAX + 1))) + #endif sizeof(LS_INFO) * TZ_MAX_LEAPS]; } u; uint ttisstdcnt; uint ttisgmtcnt; char *tzinfo_buf; read_from_file= my_fread(file, u.buf, sizeof(u.buf), MYF(MY_WME)); if (my_fclose(file, MYF(MY_WME)) != 0) return 1; if (read_from_file < (int)sizeof(struct tzhead)) return 1; ttisstdcnt= int4net(u.tzhead.tzh_ttisgmtcnt); ttisgmtcnt= int4net(u.tzhead.tzh_ttisstdcnt); sp->leapcnt= int4net(u.tzhead.tzh_leapcnt); sp->timecnt= int4net(u.tzhead.tzh_timecnt); sp->typecnt= int4net(u.tzhead.tzh_typecnt); sp->charcnt= int4net(u.tzhead.tzh_charcnt); p= u.tzhead.tzh_charcnt + sizeof u.tzhead.tzh_charcnt; if (sp->leapcnt > TZ_MAX_LEAPS || sp->typecnt == 0 || sp->typecnt > TZ_MAX_TYPES || sp->timecnt > TZ_MAX_TIMES || sp->charcnt > TZ_MAX_CHARS || (ttisstdcnt != sp->typecnt && ttisstdcnt != 0) || (ttisgmtcnt != sp->typecnt && ttisgmtcnt != 0)) return 1; if ((uint)(read_from_file - (p - u.buf)) < sp->timecnt * 4 + /* ats */ sp->timecnt + /* types */ sp->typecnt * (4 + 2) + /* ttinfos */ sp->charcnt + /* chars */ sp->leapcnt * (4 + 4) + /* lsinfos */ ttisstdcnt + /* ttisstds */ ttisgmtcnt) /* ttisgmts */ return 1; if (!(tzinfo_buf= (char *)alloc_root(storage, ALIGN_SIZE(sp->timecnt * sizeof(my_time_t)) + ALIGN_SIZE(sp->timecnt) + ALIGN_SIZE(sp->typecnt * sizeof(TRAN_TYPE_INFO)) + #ifdef ABBR_ARE_USED ALIGN_SIZE(sp->charcnt) + #endif sp->leapcnt * sizeof(LS_INFO)))) return 1; sp->ats= (my_time_t *)tzinfo_buf; tzinfo_buf+= ALIGN_SIZE(sp->timecnt * sizeof(my_time_t)); sp->types= (unsigned char *)tzinfo_buf; tzinfo_buf+= ALIGN_SIZE(sp->timecnt); sp->ttis= (TRAN_TYPE_INFO *)tzinfo_buf; tzinfo_buf+= ALIGN_SIZE(sp->typecnt * sizeof(TRAN_TYPE_INFO)); #ifdef ABBR_ARE_USED sp->chars= tzinfo_buf; tzinfo_buf+= ALIGN_SIZE(sp->charcnt); #endif sp->lsis= (LS_INFO *)tzinfo_buf; for (i= 0; i < sp->timecnt; i++, p+= 4) sp->ats[i]= int4net(p); for (i= 0; i < sp->timecnt; i++) { sp->types[i]= (unsigned char) *p++; if (sp->types[i] >= sp->typecnt) return 1; } for (i= 0; i < sp->typecnt; i++) { TRAN_TYPE_INFO * ttisp; ttisp= &sp->ttis[i]; ttisp->tt_gmtoff= int4net(p); p+= 4; ttisp->tt_isdst= (unsigned char) *p++; if (ttisp->tt_isdst != 0 && ttisp->tt_isdst != 1) return 1; ttisp->tt_abbrind= (unsigned char) *p++; if (ttisp->tt_abbrind > sp->charcnt) return 1; } for (i= 0; i < sp->charcnt; i++) sp->chars[i]= *p++; sp->chars[i]= '\0'; /* ensure '\0' at end */ for (i= 0; i < sp->leapcnt; i++) { LS_INFO *lsisp; lsisp= &sp->lsis[i]; lsisp->ls_trans= int4net(p); p+= 4; lsisp->ls_corr= int4net(p); p+= 4; } /* Since we don't support POSIX style TZ definitions in variables we don't read further like glibc or elsie code. */ } return prepare_tz_info(sp, storage); } #endif /* defined(TZINFO2SQL) || defined(TESTTIME) */ /* Finish preparation of time zone description for use in TIME_to_gmt_sec() and gmt_sec_to_TIME() functions. SYNOPSIS prepare_tz_info() sp - pointer to time zone description storage - pointer to MEM_ROOT where arrays for map allocated DESCRIPTION First task of this function is to find fallback time type which will be used if there are no transitions or we have moment in time before any transitions. Second task is to build "shifted my_time_t" -> my_time_t map used in TIME -> my_time_t conversion. Note: See description of TIME_to_gmt_sec() function first. In order to perform TIME -> my_time_t conversion we need to build table which defines "shifted by tz offset and leap seconds my_time_t" -> my_time_t function wich is almost the same (except ranges of ambiguity) as reverse function to piecewise linear function used for my_time_t -> "shifted my_time_t" conversion and which is also specified as table in zoneinfo file or in our db (It is specified as start of time type ranges and time type offsets). So basic idea is very simple - let us iterate through my_time_t space from one point of discontinuity of my_time_t -> "shifted my_time_t" function to another and build our approximation of reverse function. (Actually we iterate through ranges on which my_time_t -> "shifted my_time_t" is linear function). RETURN VALUES 0 Ok 1 Error */ static my_bool prepare_tz_info(TIME_ZONE_INFO *sp, MEM_ROOT *storage) { my_time_t cur_t= MY_TIME_T_MIN; my_time_t cur_l, end_t, end_l; my_time_t cur_max_seen_l= MY_TIME_T_MIN; long cur_offset, cur_corr, cur_off_and_corr; uint next_trans_idx, next_leap_idx; uint i; /* Temporary arrays where we will store tables. Needed because we don't know table sizes ahead. (Well we can estimate their upper bound but this will take extra space.) */ my_time_t revts[TZ_MAX_REV_RANGES]; REVT_INFO revtis[TZ_MAX_REV_RANGES]; LINT_INIT(end_l); /* Let us setup fallback time type which will be used if we have not any transitions or if we have moment of time before first transition. We will find first non-DST local time type and use it (or use first local time type if all of them are DST types). */ for (i= 0; i < sp->typecnt && sp->ttis[i].tt_isdst; i++) /* no-op */ ; if (i == sp->typecnt) i= 0; sp->fallback_tti= &(sp->ttis[i]); /* Let us build shifted my_time_t -> my_time_t map. */ sp->revcnt= 0; /* Let us find initial offset */ if (sp->timecnt == 0 || cur_t < sp->ats[0]) { /* If we have not any transitions or t is before first transition we are using already found fallback time type which index is already in i. */ next_trans_idx= 0; } else { /* cur_t == sp->ats[0] so we found transition */ i= sp->types[0]; next_trans_idx= 1; } cur_offset= sp->ttis[i].tt_gmtoff; /* let us find leap correction... unprobable, but... */ for (next_leap_idx= 0; next_leap_idx < sp->leapcnt && cur_t >= sp->lsis[next_leap_idx].ls_trans; ++next_leap_idx) continue; if (next_leap_idx > 0) cur_corr= sp->lsis[next_leap_idx - 1].ls_corr; else cur_corr= 0; /* Iterate trough t space */ while (sp->revcnt < TZ_MAX_REV_RANGES - 1) { cur_off_and_corr= cur_offset - cur_corr; /* We assuming that cur_t could be only overflowed downwards, we also assume that end_t won't be overflowed in this case. */ if (cur_off_and_corr < 0 && cur_t < MY_TIME_T_MIN - cur_off_and_corr) cur_t= MY_TIME_T_MIN - cur_off_and_corr; cur_l= cur_t + cur_off_and_corr; /* Let us choose end_t as point before next time type change or leap second correction. */ end_t= min((next_trans_idx < sp->timecnt) ? sp->ats[next_trans_idx] - 1: MY_TIME_T_MAX, (next_leap_idx < sp->leapcnt) ? sp->lsis[next_leap_idx].ls_trans - 1: MY_TIME_T_MAX); /* again assuming that end_t can be overlowed only in positive side we also assume that end_t won't be overflowed in this case. */ if (cur_off_and_corr > 0 && end_t > MY_TIME_T_MAX - cur_off_and_corr) end_t= MY_TIME_T_MAX - cur_off_and_corr; end_l= end_t + cur_off_and_corr; if (end_l > cur_max_seen_l) { /* We want special handling in the case of first range */ if (cur_max_seen_l == MY_TIME_T_MIN) { revts[sp->revcnt]= cur_l; revtis[sp->revcnt].rt_offset= cur_off_and_corr; revtis[sp->revcnt].rt_type= 0; sp->revcnt++; cur_max_seen_l= end_l; } else { if (cur_l > cur_max_seen_l + 1) { /* We have a spring time-gap and we are not at the first range */ revts[sp->revcnt]= cur_max_seen_l + 1; revtis[sp->revcnt].rt_offset= revtis[sp->revcnt-1].rt_offset; revtis[sp->revcnt].rt_type= 1; sp->revcnt++; if (sp->revcnt == TZ_MAX_TIMES + TZ_MAX_LEAPS + 1) break; /* That was too much */ cur_max_seen_l= cur_l - 1; } /* Assume here end_l > cur_max_seen_l (because end_l>=cur_l) */ revts[sp->revcnt]= cur_max_seen_l + 1; revtis[sp->revcnt].rt_offset= cur_off_and_corr; revtis[sp->revcnt].rt_type= 0; sp->revcnt++; cur_max_seen_l= end_l; } } if (end_t == MY_TIME_T_MAX || (cur_off_and_corr > 0) && (end_t >= MY_TIME_T_MAX - cur_off_and_corr)) /* end of t space */ break; cur_t= end_t + 1; /* Let us find new offset and correction. Because of our choice of end_t cur_t can only be point where new time type starts or/and leap correction is performed. */ if (sp->timecnt != 0 && cur_t >= sp->ats[0]) /* else reuse old offset */ if (next_trans_idx < sp->timecnt && cur_t == sp->ats[next_trans_idx]) { /* We are at offset point */ cur_offset= sp->ttis[sp->types[next_trans_idx]].tt_gmtoff; ++next_trans_idx; } if (next_leap_idx < sp->leapcnt && cur_t == sp->lsis[next_leap_idx].ls_trans) { /* we are at leap point */ cur_corr= sp->lsis[next_leap_idx].ls_corr; ++next_leap_idx; } } /* check if we have had enough space */ if (sp->revcnt == TZ_MAX_REV_RANGES - 1) return 1; /* set maximum end_l as finisher */ revts[sp->revcnt]= end_l; /* Allocate arrays of proper size in sp and copy result there */ if (!(sp->revts= (my_time_t *)alloc_root(storage, sizeof(my_time_t) * (sp->revcnt + 1))) || !(sp->revtis= (REVT_INFO *)alloc_root(storage, sizeof(REVT_INFO) * sp->revcnt))) return 1; memcpy(sp->revts, revts, sizeof(my_time_t) * (sp->revcnt + 1)); memcpy(sp->revtis, revtis, sizeof(REVT_INFO) * sp->revcnt); return 0; } #if !defined(TZINFO2SQL) static const uint mon_lengths[2][MONS_PER_YEAR]= { { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }, { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 } }; static const uint mon_starts[2][MONS_PER_YEAR]= { { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 }, { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335 } }; static const uint year_lengths[2]= { DAYS_PER_NYEAR, DAYS_PER_LYEAR }; #define LEAPS_THRU_END_OF(y) ((y) / 4 - (y) / 100 + (y) / 400) /* Converts time from my_time_t representation (seconds in UTC since Epoch) to broken down representation using given local time zone offset. SYNOPSIS sec_to_TIME() tmp - pointer to structure for broken down representation t - my_time_t value to be converted offset - local time zone offset DESCRIPTION Convert my_time_t with offset to TIME struct. Differs from timesub (from elsie code) because doesn't contain any leap correction and TM_GMTOFF and is_dst setting and contains some MySQL specific initialization. Funny but with removing of these we almost have glibc's offtime function. */ static void sec_to_TIME(TIME * tmp, my_time_t t, long offset) { long days; long rem; int y; int yleap; const uint *ip; days= t / SECS_PER_DAY; rem= t % SECS_PER_DAY; /* We do this as separate step after dividing t, because this allows us handle times near my_time_t bounds without overflows. */ rem+= offset; while (rem < 0) { rem+= SECS_PER_DAY; days--; } while (rem >= SECS_PER_DAY) { rem -= SECS_PER_DAY; days++; } tmp->hour= (uint)(rem / SECS_PER_HOUR); rem= rem % SECS_PER_HOUR; tmp->minute= (uint)(rem / SECS_PER_MIN); /* A positive leap second requires a special representation. This uses "... ??:59:60" et seq. */ tmp->second= (uint)(rem % SECS_PER_MIN); y= EPOCH_YEAR; while (days < 0 || days >= (long)year_lengths[yleap= isleap(y)]) { int newy; newy= y + days / DAYS_PER_NYEAR; if (days < 0) newy--; days-= (newy - y) * DAYS_PER_NYEAR + LEAPS_THRU_END_OF(newy - 1) - LEAPS_THRU_END_OF(y - 1); y= newy; } tmp->year= y; ip= mon_lengths[yleap]; for (tmp->month= 0; days >= (long) ip[tmp->month]; tmp->month++) days= days - (long) ip[tmp->month]; tmp->month++; tmp->day= (uint)(days + 1); /* filling MySQL specific TIME members */ tmp->neg= 0; tmp->second_part= 0; tmp->time_type= MYSQL_TIMESTAMP_DATETIME; } /* Find time range wich contains given my_time_t value SYNOPSIS find_time_range() t - my_time_t value for which we looking for range range_boundaries - sorted array of range starts. higher_bound - number of ranges DESCRIPTION Performs binary search for range which contains given my_time_t value. It has sense if number of ranges is greater than zero and my_time_t value is greater or equal than beginning of first range. It also assumes that t belongs to some range specified or end of last is MY_TIME_T_MAX. With this localtime_r on real data may takes less time than with linear search (I've seen 30% speed up). RETURN VALUE Index of range to which t belongs */ static uint find_time_range(my_time_t t, const my_time_t *range_boundaries, uint higher_bound) { uint i, lower_bound= 0; /* Function will work without this assertion but result would be meaningless. */ DBUG_ASSERT(higher_bound > 0 && t >= range_boundaries[0]); /* Do binary search for minimal interval which contain t. We preserve: range_boundaries[lower_bound] <= t < range_boundaries[higher_bound] invariant and decrease this higher_bound - lower_bound gap twice times on each step. */ while (higher_bound - lower_bound > 1) { i= (lower_bound + higher_bound) >> 1; if (range_boundaries[i] <= t) lower_bound= i; else higher_bound= i; } return lower_bound; } /* Find local time transition for given my_time_t. SYNOPSIS find_transition_type() t - my_time_t value to be converted sp - pointer to struct with time zone description RETURN VALUE Pointer to structure in time zone description describing local time type for given my_time_t. */ static const TRAN_TYPE_INFO * find_transition_type(my_time_t t, const TIME_ZONE_INFO *sp) { if (unlikely(sp->timecnt == 0 || t < sp->ats[0])) { /* If we have not any transitions or t is before first transition let us use fallback time type. */ return sp->fallback_tti; } /* Do binary search for minimal interval between transitions which contain t. With this localtime_r on real data may takes less time than with linear search (I've seen 30% speed up). */ return &(sp->ttis[sp->types[find_time_range(t, sp->ats, sp->timecnt)]]); } /* Converts time in my_time_t representation (seconds in UTC since Epoch) to broken down TIME representation in local time zone. SYNOPSIS gmt_sec_to_TIME() tmp - pointer to structure for broken down represenatation sec_in_utc - my_time_t value to be converted sp - pointer to struct with time zone description TODO We can improve this function by creating joined array of transitions and leap corrections. This will require adding extra field to TRAN_TYPE_INFO for storing number of "extra" seconds to minute occured due to correction (60th and 61st second, look how we calculate them as "hit" in this function). Under realistic assumptions about frequency of transitions the same array can be used fot TIME -> my_time_t conversion. For this we need to implement tweaked binary search which will take into account that some TIME has two matching my_time_t ranges and some of them have none. */ static void gmt_sec_to_TIME(TIME *tmp, my_time_t sec_in_utc, const TIME_ZONE_INFO *sp) { const TRAN_TYPE_INFO *ttisp; const LS_INFO *lp; long corr= 0; int hit= 0; int i; /* Find proper transition (and its local time type) for our sec_in_utc value. Funny but again by separating this step in function we receive code which very close to glibc's code. No wonder since they obviously use the same base and all steps are sensible. */ ttisp= find_transition_type(sec_in_utc, sp); /* Let us find leap correction for our sec_in_utc value and number of extra secs to add to this minute. This loop is rarely used because most users will use time zones without leap seconds, and even in case when we have such time zone there won't be many iterations (we have about 22 corrections at this moment (2004)). */ for ( i= sp->leapcnt; i-- > 0; ) { lp= &sp->lsis[i]; if (sec_in_utc >= lp->ls_trans) { if (sec_in_utc == lp->ls_trans) { hit= ((i == 0 && lp->ls_corr > 0) || lp->ls_corr > sp->lsis[i - 1].ls_corr); if (hit) { while (i > 0 && sp->lsis[i].ls_trans == sp->lsis[i - 1].ls_trans + 1 && sp->lsis[i].ls_corr == sp->lsis[i - 1].ls_corr + 1) { hit++; i--; } } } corr= lp->ls_corr; break; } } sec_to_TIME(tmp, sec_in_utc, ttisp->tt_gmtoff - corr); tmp->second+= hit; } /* Converts local time in broken down representation to local time zone analog of my_time_t represenation. SYNOPSIS sec_since_epoch() year, mon, mday, hour, min, sec - broken down representation. DESCRIPTION Converts time in broken down representation to my_time_t representation ignoring time zone. Note that we cannot convert back some valid _local_ times near ends of my_time_t range because of my_time_t overflow. But we ignore this fact now since MySQL will never pass such argument. RETURN VALUE Seconds since epoch time representation. */ static my_time_t sec_since_epoch(int year, int mon, int mday, int hour, int min ,int sec) { #ifndef WE_WANT_TO_HANDLE_UNORMALIZED_DATES /* It turns out that only whenever month is normalized or unnormalized plays role. */ DBUG_ASSERT(mon > 0 && mon < 13); long days= year * DAYS_PER_NYEAR - EPOCH_YEAR * DAYS_PER_NYEAR + LEAPS_THRU_END_OF(year - 1) - LEAPS_THRU_END_OF(EPOCH_YEAR - 1); days+= mon_starts[isleap(year)][mon - 1]; #else long norm_month= (mon - 1) % MONS_PER_YEAR; long a_year= year + (mon - 1)/MONS_PER_YEAR - (int)(norm_month < 0); long days= a_year * DAYS_PER_NYEAR - EPOCH_YEAR * DAYS_PER_NYEAR + LEAPS_THRU_END_OF(a_year - 1) - LEAPS_THRU_END_OF(EPOCH_YEAR - 1); days+= mon_starts[isleap(a_year)] [norm_month + (norm_month < 0 ? MONS_PER_YEAR : 0)]; #endif days+= mday - 1; return ((days * HOURS_PER_DAY + hour) * MINS_PER_HOUR + min) * SECS_PER_MIN + sec; } /* Works like sec_since_epoch but expects TIME structure as parameter. */ my_time_t sec_since_epoch_TIME(TIME *t) { return sec_since_epoch(t->year, t->month, t->day, t->hour, t->minute, t->second); } /* Converts local time in broken down TIME representation to my_time_t representation. SYNOPSIS TIME_to_gmt_sec() t - pointer to structure for broken down represenatation sp - pointer to struct with time zone description in_dst_time_gap - pointer to bool which is set to true if datetime value passed doesn't really exist (i.e. falls into spring time-gap) and is not touched otherwise. DESCRIPTION This is mktime analog for MySQL. It is essentially different from mktime (or hypotetical my_mktime) because: - It has no idea about tm_isdst member so if it has two answers it will give the smaller one - If we are in spring time gap then it will return beginning of the gap - It can give wrong results near the ends of my_time_t due to overflows, but we are safe since in MySQL we will never call this function for such dates (its restriction for year between 1970 and 2038 gives us several days of reserve). - By default it doesn't support un-normalized input. But if sec_since_epoch() function supports un-normalized dates then this function should handle un-normalized input right, altough it won't normalize structure TIME. Traditional approach to problem of conversion from broken down representation to time_t is iterative. Both elsie's and glibc implementation try to guess what time_t value should correspond to this broken-down value. They perform localtime_r function on their guessed value and then calculate the difference and try to improve their guess. Elsie's code guesses time_t value in bit by bit manner, Glibc's code tries to add difference between broken-down value corresponding to guess and target broken-down value to current guess. It also uses caching of last found correction... So Glibc's approach is essentially faster but introduces some undetermenism (in case if is_dst member of broken-down representation (tm struct) is not known and we have two possible answers). We use completely different approach. It is better since it is both faster than iterative implementations and fully determenistic. If you look at my_time_t to TIME conversion then you'll find that it consist of two steps: The first is calculating shifted my_time_t value and the second - TIME calculation from shifted my_time_t value (well it is a bit simplified picture). The part in which we are interested in is my_time_t -> shifted my_time_t conversion. It is piecewise linear function which is defined by combination of transition times as break points and times offset as changing function parameter. The possible inverse function for this converison would be ambiguos but with MySQL's restrictions we can use some function which is the same as inverse function on unambigiuos ranges and coincides with one of branches of inverse function in other ranges. Thus we just need to build table which will determine this shifted my_time_t -> my_time_t conversion similar to existing (my_time_t -> shifted my_time_t table). We do this in prepare_tz_info function. TODO If we can even more improve this function. For doing this we will need to build joined map of transitions and leap corrections for gmt_sec_to_TIME() function (similar to revts/revtis). Under realistic assumptions about frequency of transitions we can use the same array for TIME_to_gmt_sec(). We need to implement special version of binary search for this. Such step will be beneficial to CPU cache since we will decrease data-set used for conversion twice. RETURN VALUE Seconds in UTC since Epoch. 0 in case of error. */ static my_time_t TIME_to_gmt_sec(const TIME *t, const TIME_ZONE_INFO *sp, my_bool *in_dst_time_gap) { my_time_t local_t; uint saved_seconds; uint i; DBUG_ENTER("TIME_to_gmt_sec"); /* We need this for correct leap seconds handling */ if (t->second < SECS_PER_MIN) saved_seconds= 0; else saved_seconds= t->second; /* NOTE If we want to convert full my_time_t range without MySQL restrictions we should catch overflow here somehow. */ local_t= sec_since_epoch(t->year, t->month, t->day, t->hour, t->minute, saved_seconds ? 0 : t->second); /* We have at least one range */ DBUG_ASSERT(sp->revcnt >= 1); if (local_t < sp->revts[0] || local_t > sp->revts[sp->revcnt]) { /* This means that source time can't be represented as my_time_t due to limited my_time_t range. */ DBUG_RETURN(0); } /* binary search for our range */ i= find_time_range(local_t, sp->revts, sp->revcnt); if (sp->revtis[i].rt_type) { /* Oops! We are in spring time gap. May be we should return error here? Now we are returning my_time_t value corresponding to the beginning of the gap. */ *in_dst_time_gap= 1; DBUG_RETURN(sp->revts[i] - sp->revtis[i].rt_offset + saved_seconds); } else DBUG_RETURN(local_t - sp->revtis[i].rt_offset + saved_seconds); } /* End of elsie derived code. */ #endif /* !defined(TZINFO2SQL) */ #if !defined(TESTTIME) && !defined(TZINFO2SQL) /* String with names of SYSTEM time zone. */ static const String tz_SYSTEM_name("SYSTEM", 6, &my_charset_latin1); /* Instance of this class represents local time zone used on this system (specified by TZ environment variable or via any other system mechanism). It uses system functions (localtime_r, my_system_gmt_sec) for conversion and is always available. Because of this it is used by default - if there were no explicit time zone specified. On the other hand because of this conversion methods provided by this class is significantly slower and possibly less multi-threaded-friendly than corresponding Time_zone_db methods so the latter should be preffered there it is possible. */ class Time_zone_system : public Time_zone { public: virtual my_time_t TIME_to_gmt_sec(const TIME *t, my_bool *in_dst_time_gap) const; virtual void gmt_sec_to_TIME(TIME *tmp, my_time_t t) const; virtual const String * get_name() const; }; /* Converts local time in system time zone in TIME representation to its my_time_t representation. SYNOPSIS TIME_to_gmt_sec() t - pointer to TIME structure with local time in broken-down representation. in_dst_time_gap - pointer to bool which is set to true if datetime value passed doesn't really exist (i.e. falls into spring time-gap) and is not touched otherwise. DESCRIPTION This method uses system function (localtime_r()) for conversion local time in system time zone in TIME structure to its my_time_t representation. Unlike the same function for Time_zone_db class it it won't handle unnormalized input properly. Still it will return lowest possible my_time_t in case of ambiguity or if we provide time corresponding to the time-gap. You should call init_time() function before using this function. RETURN VALUE Corresponding my_time_t value or 0 in case of error */ my_time_t Time_zone_system::TIME_to_gmt_sec(const TIME *t, my_bool *in_dst_time_gap) const { long not_used; return my_system_gmt_sec(t, ¬_used, in_dst_time_gap); } /* Converts time from UTC seconds since Epoch (my_time_t) representation to system local time zone broken-down representation. SYNOPSIS gmt_sec_to_TIME() tmp - pointer to TIME structure to fill-in t - my_time_t value to be converted NOTE We assume that value passed to this function will fit into time_t range supported by localtime_r. This conversion is putting restriction on TIMESTAMP range in MySQL. If we can get rid of SYSTEM time zone at least for interaction with client then we can extend TIMESTAMP range down to the 1902 easily. */ void Time_zone_system::gmt_sec_to_TIME(TIME *tmp, my_time_t t) const { struct tm tmp_tm; time_t tmp_t= (time_t)t; localtime_r(&tmp_t, &tmp_tm); localtime_to_TIME(tmp, &tmp_tm); tmp->time_type= MYSQL_TIMESTAMP_DATETIME; } /* Get name of time zone SYNOPSIS get_name() RETURN VALUE Name of time zone as String */ const String * Time_zone_system::get_name() const { return &tz_SYSTEM_name; } /* Instance of this class represents UTC time zone. It uses system gmtime_r function for conversions and is always available. It is used only for my_time_t -> TIME conversions in various UTC_... functions, it is not intended for TIME -> my_time_t conversions and shouldn't be exposed to user. */ class Time_zone_utc : public Time_zone { public: virtual my_time_t TIME_to_gmt_sec(const TIME *t, my_bool *in_dst_time_gap) const; virtual void gmt_sec_to_TIME(TIME *tmp, my_time_t t) const; virtual const String * get_name() const; }; /* Convert UTC time from TIME representation to its my_time_t representation. SYNOPSIS TIME_to_gmt_sec() t - pointer to TIME structure with local time in broken-down representation. in_dst_time_gap - pointer to bool which is set to true if datetime value passed doesn't really exist (i.e. falls into spring time-gap) and is not touched otherwise. DESCRIPTION Since Time_zone_utc is used only internally for my_time_t -> TIME conversions, this function of Time_zone interface is not implemented for this class and should not be called. RETURN VALUE 0 */ my_time_t Time_zone_utc::TIME_to_gmt_sec(const TIME *t, my_bool *in_dst_time_gap) const { /* Should be never called */ DBUG_ASSERT(0); return 0; } /* Converts time from UTC seconds since Epoch (my_time_t) representation to broken-down representation (also in UTC). SYNOPSIS gmt_sec_to_TIME() tmp - pointer to TIME structure to fill-in t - my_time_t value to be converted NOTE See note for apropriate Time_zone_system method. */ void Time_zone_utc::gmt_sec_to_TIME(TIME *tmp, my_time_t t) const { struct tm tmp_tm; time_t tmp_t= (time_t)t; gmtime_r(&tmp_t, &tmp_tm); localtime_to_TIME(tmp, &tmp_tm); tmp->time_type= MYSQL_TIMESTAMP_DATETIME; } /* Get name of time zone SYNOPSIS get_name() DESCRIPTION Since Time_zone_utc is used only internally by SQL's UTC_* functions it is not accessible directly, and hence this function of Time_zone interface is not implemented for this class and should not be called. RETURN VALUE 0 */ const String * Time_zone_utc::get_name() const { /* Should be never called */ DBUG_ASSERT(0); return 0; } /* Instance of this class represents some time zone which is described in mysql.time_zone family of tables. */ class Time_zone_db : public Time_zone { public: Time_zone_db(TIME_ZONE_INFO *tz_info_arg, const String * tz_name_arg); virtual my_time_t TIME_to_gmt_sec(const TIME *t, my_bool *in_dst_time_gap) const; virtual void gmt_sec_to_TIME(TIME *tmp, my_time_t t) const; virtual const String * get_name() const; private: TIME_ZONE_INFO *tz_info; const String *tz_name; }; /* Initializes object representing time zone described by mysql.time_zone tables. SYNOPSIS Time_zone_db() tz_info_arg - pointer to TIME_ZONE_INFO structure which is filled according to db or other time zone description (for example by my_tz_init()). Several Time_zone_db instances can share one TIME_ZONE_INFO structure. tz_name_arg - name of time zone. */ Time_zone_db::Time_zone_db(TIME_ZONE_INFO *tz_info_arg, const String *tz_name_arg): tz_info(tz_info_arg), tz_name(tz_name_arg) { } /* Converts local time in time zone described from TIME representation to its my_time_t representation. SYNOPSIS TIME_to_gmt_sec() t - pointer to TIME structure with local time in broken-down representation. in_dst_time_gap - pointer to bool which is set to true if datetime value passed doesn't really exist (i.e. falls into spring time-gap) and is not touched otherwise. DESCRIPTION Please see ::TIME_to_gmt_sec for function description and parameter restrictions. RETURN VALUE Corresponding my_time_t value or 0 in case of error */ my_time_t Time_zone_db::TIME_to_gmt_sec(const TIME *t, my_bool *in_dst_time_gap) const { return ::TIME_to_gmt_sec(t, tz_info, in_dst_time_gap); } /* Converts time from UTC seconds since Epoch (my_time_t) representation to local time zone described in broken-down representation. SYNOPSIS gmt_sec_to_TIME() tmp - pointer to TIME structure to fill-in t - my_time_t value to be converted */ void Time_zone_db::gmt_sec_to_TIME(TIME *tmp, my_time_t t) const { ::gmt_sec_to_TIME(tmp, t, tz_info); } /* Get name of time zone SYNOPSIS get_name() RETURN VALUE Name of time zone as ASCIIZ-string */ const String * Time_zone_db::get_name() const { return tz_name; } /* Instance of this class represents time zone which was specified as offset from UTC. */ class Time_zone_offset : public Time_zone { public: Time_zone_offset(long tz_offset_arg); virtual my_time_t TIME_to_gmt_sec(const TIME *t, my_bool *in_dst_time_gap) const; virtual void gmt_sec_to_TIME(TIME *tmp, my_time_t t) const; virtual const String * get_name() const; /* This have to be public because we want to be able to access it from my_offset_tzs_get_key() function */ long offset; private: /* Extra reserve because of snprintf */ char name_buff[7+16]; String name; }; /* Initializes object representing time zone described by its offset from UTC. SYNOPSIS Time_zone_offset() tz_offset_arg - offset from UTC in seconds. Positive for direction to east. */ Time_zone_offset::Time_zone_offset(long tz_offset_arg): offset(tz_offset_arg) { uint hours= abs((int)(offset / SECS_PER_HOUR)); uint minutes= abs((int)(offset % SECS_PER_HOUR / SECS_PER_MIN)); ulong length= my_snprintf(name_buff, sizeof(name_buff), "%s%02d:%02d", (offset>=0) ? "+" : "-", hours, minutes); name.set(name_buff, length, &my_charset_latin1); } /* Converts local time in time zone described as offset from UTC from TIME representation to its my_time_t representation. SYNOPSIS TIME_to_gmt_sec() t - pointer to TIME structure with local time in broken-down representation. in_dst_time_gap - pointer to bool which should be set to true if datetime value passed doesn't really exist (i.e. falls into spring time-gap) and is not touched otherwise. It is not really used in this class. RETURN VALUE Corresponding my_time_t value or 0 in case of error */ my_time_t Time_zone_offset::TIME_to_gmt_sec(const TIME *t, my_bool *in_dst_time_gap) const { return sec_since_epoch(t->year, t->month, t->day, t->hour, t->minute, t->second) - offset; } /* Converts time from UTC seconds since Epoch (my_time_t) representation to local time zone described as offset from UTC and in broken-down representation. SYNOPSIS gmt_sec_to_TIME() tmp - pointer to TIME structure to fill-in t - my_time_t value to be converted */ void Time_zone_offset::gmt_sec_to_TIME(TIME *tmp, my_time_t t) const { sec_to_TIME(tmp, t, offset); } /* Get name of time zone SYNOPSIS get_name() RETURN VALUE Name of time zone as pointer to String object */ const String * Time_zone_offset::get_name() const { return &name; } static Time_zone_utc tz_UTC; static Time_zone_system tz_SYSTEM; Time_zone *my_tz_UTC= &tz_UTC; Time_zone *my_tz_SYSTEM= &tz_SYSTEM; static HASH tz_names; static HASH offset_tzs; static MEM_ROOT tz_storage; /* These mutex protects offset_tzs and tz_storage. These protection needed only when we are trying to set time zone which is specified as offset, and searching for existing time zone in offset_tzs or creating if it didn't existed before in tz_storage. So contention is low. */ static pthread_mutex_t tz_LOCK; static bool tz_inited= 0; /* This two static variables are inteded for holding info about leap seconds shared by all time zones. */ static uint tz_leapcnt= 0; static LS_INFO *tz_lsis= 0; /* Shows whenever we have found time zone tables during start-up. Used for avoiding of putting those tables to global table list for queries that use time zone info. */ static bool time_zone_tables_exist= 1; typedef struct st_tz_names_entry: public Sql_alloc { String name; Time_zone *tz; } TZ_NAMES_ENTRY; /* We are going to call both of these functions from C code so they should obey C calling conventions. */ extern "C" byte* my_tz_names_get_key(TZ_NAMES_ENTRY *entry, uint *length, my_bool not_used __attribute__((unused))) { *length= entry->name.length(); return (byte*) entry->name.ptr(); } extern "C" byte* my_offset_tzs_get_key(Time_zone_offset *entry, uint *length, my_bool not_used __attribute__((unused))) { *length= sizeof(long); return (byte*) &entry->offset; } /* Prepare table list with time zone related tables from preallocated array and add to global table list. SYNOPSIS tz_init_table_list() tz_tabs - pointer to preallocated array of 4 TABLE_LIST objects global_next_ptr - pointer to variable which points to global_next member of last element of global table list (or list root then list is empty) (in/out). DESCRIPTION This function prepares list of TABLE_LIST objects which can be used for opening of time zone tables from preallocated array. It also links this list to the end of global table list (it will read and update accordingly variable pointed by global_next_ptr for this). */ static void tz_init_table_list(TABLE_LIST *tz_tabs, TABLE_LIST ***global_next_ptr) { bzero(tz_tabs, sizeof(TABLE_LIST) * 4); tz_tabs[0].alias= tz_tabs[0].table_name= (char*)"time_zone_name"; tz_tabs[1].alias= tz_tabs[1].table_name= (char*)"time_zone"; tz_tabs[2].alias= tz_tabs[2].table_name= (char*)"time_zone_transition_type"; tz_tabs[3].alias= tz_tabs[3].table_name= (char*)"time_zone_transition"; tz_tabs[0].next_global= tz_tabs[0].next_local= tz_tabs+1; tz_tabs[1].next_global= tz_tabs[1].next_local= tz_tabs+2; tz_tabs[2].next_global= tz_tabs[2].next_local= tz_tabs+3; tz_tabs[0].lock_type= tz_tabs[1].lock_type= tz_tabs[2].lock_type= tz_tabs[3].lock_type= TL_READ; tz_tabs[0].db= tz_tabs[1].db= tz_tabs[2].db= tz_tabs[3].db= (char *)"mysql"; /* Link into global list */ tz_tabs[0].prev_global= *global_next_ptr; tz_tabs[1].prev_global= &tz_tabs[0].next_global; tz_tabs[2].prev_global= &tz_tabs[1].next_global; tz_tabs[3].prev_global= &tz_tabs[2].next_global; **global_next_ptr= tz_tabs; /* Update last-global-pointer to point to pointer in last table */ *global_next_ptr= &tz_tabs[3].next_global; } /* Fake table list object, pointer to which is returned by my_tz_get_tables_list() as indication of error. */ TABLE_LIST fake_time_zone_tables_list; /* Create table list with time zone related tables and add it to the end of global table list. SYNOPSIS my_tz_get_table_list() thd - current thread object global_next_ptr - pointer to variable which points to global_next member of last element of global table list (or list root then list is empty) (in/out). DESCRIPTION This function creates list of TABLE_LIST objects allocated in thd's memroot, which can be used for opening of time zone tables. It will also link this list to the end of global table list (it will read and update accordingly variable pointed by global_next_ptr for this). NOTE my_tz_check_n_skip_implicit_tables() function depends on fact that elements of list created are allocated as TABLE_LIST[4] array. RETURN VALUES Returns pointer to first TABLE_LIST object, (could be 0 if time zone tables don't exist) and &fake_time_zone_tables_list in case of error. */ TABLE_LIST * my_tz_get_table_list(THD *thd, TABLE_LIST ***global_next_ptr) { TABLE_LIST *tz_tabs; DBUG_ENTER("my_tz_get_table_list"); if (!time_zone_tables_exist) DBUG_RETURN(0); if (!(tz_tabs= (TABLE_LIST *)thd->alloc(sizeof(TABLE_LIST) * 4))) DBUG_RETURN(&fake_time_zone_tables_list); tz_init_table_list(tz_tabs, global_next_ptr); DBUG_RETURN(tz_tabs); } /* Initialize time zone support infrastructure. SYNOPSIS my_tz_init() thd - current thread object default_tzname - default time zone or 0 if none. bootstrap - indicates whenever we are in bootstrap mode DESCRIPTION This function will init memory structures needed for time zone support, it will register mandatory SYSTEM time zone in them. It will try to open mysql.time_zone* tables and load information about default time zone and information which further will be shared among all time zones loaded. If system tables with time zone descriptions don't exist it won't fail (unless default_tzname is time zone from tables). If bootstrap parameter is true then this routine assumes that we are in bootstrap mode and won't load time zone descriptions unless someone specifies default time zone which is supposedly stored in those tables. It'll also set default time zone if it is specified. RETURN VALUES 0 - ok 1 - Error */ my_bool my_tz_init(THD *org_thd, const char *default_tzname, my_bool bootstrap) { THD *thd; TABLE_LIST *tables= 0; TABLE_LIST tables_buff[5], **last_global_next_ptr; TABLE *table; TZ_NAMES_ENTRY *tmp_tzname; my_bool return_val= 1; int res; DBUG_ENTER("my_tz_init"); /* To be able to run this from boot, we allocate a temporary THD */ if (!(thd= new THD)) DBUG_RETURN(1); thd->thread_stack= (char*) &thd; thd->store_globals(); /* Init all memory structures that require explicit destruction */ if (hash_init(&tz_names, &my_charset_latin1, 20, 0, 0, (hash_get_key)my_tz_names_get_key, 0, 0)) { sql_print_error("Fatal error: OOM while initializing time zones"); goto end; } if (hash_init(&offset_tzs, &my_charset_latin1, 26, 0, 0, (hash_get_key)my_offset_tzs_get_key, 0, 0)) { sql_print_error("Fatal error: OOM while initializing time zones"); hash_free(&tz_names); goto end; } init_alloc_root(&tz_storage, 32 * 1024, 0); VOID(pthread_mutex_init(&tz_LOCK, MY_MUTEX_INIT_FAST)); tz_inited= 1; /* Add 'SYSTEM' time zone to tz_names hash */ if (!(tmp_tzname= new (&tz_storage) TZ_NAMES_ENTRY())) { sql_print_error("Fatal error: OOM while initializing time zones"); goto end_with_cleanup; } tmp_tzname->name.set(STRING_WITH_LEN("SYSTEM"), &my_charset_latin1); tmp_tzname->tz= my_tz_SYSTEM; if (my_hash_insert(&tz_names, (const byte *)tmp_tzname)) { sql_print_error("Fatal error: OOM while initializing time zones"); goto end_with_cleanup; } if (bootstrap) { /* If we are in bootstrap mode we should not load time zone tables */ return_val= time_zone_tables_exist= 0; goto end_with_setting_default_tz; } /* After this point all memory structures are inited and we even can live without time zone description tables. Now try to load information about leap seconds shared by all time zones. */ thd->db= my_strdup("mysql",MYF(0)); thd->db_length= 5; // Safety bzero((char*) &tables_buff, sizeof(TABLE_LIST)); tables_buff[0].alias= tables_buff[0].table_name= (char*)"time_zone_leap_second"; tables_buff[0].lock_type= TL_READ; tables_buff[0].db= thd->db; /* Fill TABLE_LIST for the rest of the time zone describing tables and link it to first one. */ last_global_next_ptr= &(tables_buff[0].next_global); tz_init_table_list(tables_buff + 1, &last_global_next_ptr); if (simple_open_n_lock_tables(thd, tables_buff)) { sql_print_warning("Can't open and lock time zone table: %s " "trying to live without them", thd->net.last_error); /* We will try emulate that everything is ok */ return_val= time_zone_tables_exist= 0; goto end_with_setting_default_tz; } tables= tables_buff + 1; /* Now we are going to load leap seconds descriptions that are shared between all time zones that use them. We are using index for getting records in proper order. Since we share the same MEM_ROOT between all time zones we just allocate enough memory for it first. */ if (!(tz_lsis= (LS_INFO*) alloc_root(&tz_storage, sizeof(LS_INFO) * TZ_MAX_LEAPS))) { sql_print_error("Fatal error: Out of memory while loading " "mysql.time_zone_leap_second table"); goto end_with_close; } table= tables_buff[0].table; /* It is OK to ignore ha_index_init()/ha_index_end() return values since mysql.time_zone* tables are MyISAM and these operations always succeed for MyISAM. */ (void)table->file->ha_index_init(0, 1); tz_leapcnt= 0; res= table->file->index_first(table->record[0]); while (!res) { if (tz_leapcnt + 1 > TZ_MAX_LEAPS) { sql_print_error("Fatal error: While loading mysql.time_zone_leap_second" " table: too much leaps"); table->file->ha_index_end(); goto end_with_close; } tz_lsis[tz_leapcnt].ls_trans= (my_time_t)table->field[0]->val_int(); tz_lsis[tz_leapcnt].ls_corr= (long)table->field[1]->val_int(); tz_leapcnt++; DBUG_PRINT("info", ("time_zone_leap_second table: tz_leapcnt=%u tt_time=%lld offset=%ld", tz_leapcnt, (longlong)tz_lsis[tz_leapcnt-1].ls_trans, tz_lsis[tz_leapcnt-1].ls_corr)); res= table->file->index_next(table->record[0]); } (void)table->file->ha_index_end(); if (res != HA_ERR_END_OF_FILE) { sql_print_error("Fatal error: Error while loading " "mysql.time_zone_leap_second table"); goto end_with_close; } /* Loading of info about leap seconds succeeded */ return_val= 0; end_with_setting_default_tz: /* If we have default time zone try to load it */ if (default_tzname) { String tmp_tzname(default_tzname, &my_charset_latin1); if (!(global_system_variables.time_zone= my_tz_find(&tmp_tzname, tables))) { sql_print_error("Fatal error: Illegal or unknown default time zone '%s'", default_tzname); return_val= 1; } } end_with_close: thd->version--; /* Force close to free memory */ close_thread_tables(thd); end_with_cleanup: /* if there were error free time zone describing structs */ if (return_val) my_tz_free(); end: delete thd; if (org_thd) org_thd->store_globals(); /* purecov: inspected */ else { /* Remember that we don't have a THD */ my_pthread_setspecific_ptr(THR_THD, 0); my_pthread_setspecific_ptr(THR_MALLOC, 0); } DBUG_RETURN(return_val); } /* Free resources used by time zone support infrastructure. SYNOPSIS my_tz_free() */ void my_tz_free() { if (tz_inited) { tz_inited= 0; VOID(pthread_mutex_destroy(&tz_LOCK)); hash_free(&offset_tzs); hash_free(&tz_names); free_root(&tz_storage, MYF(0)); } } /* Load time zone description from system tables. SYNOPSIS tz_load_from_open_tables() tz_name - name of time zone that should be loaded. tz_tables - list of tables from which time zone description should be loaded DESCRIPTION This function will try to load information about time zone specified from the list of the already opened and locked tables (first table in tz_tables should be time_zone_name, next time_zone, then time_zone_transition_type and time_zone_transition should be last). It will also update information in hash used for time zones lookup. RETURN VALUES Returns pointer to newly created Time_zone object or 0 in case of error. */ static Time_zone* tz_load_from_open_tables(const String *tz_name, TABLE_LIST *tz_tables) { TABLE *table= 0; TIME_ZONE_INFO *tz_info; TZ_NAMES_ENTRY *tmp_tzname; Time_zone *return_val= 0; int res; uint tzid, ttid; my_time_t ttime; char buff[MAX_FIELD_WIDTH]; String abbr(buff, sizeof(buff), &my_charset_latin1); char *alloc_buff, *tz_name_buff; /* Temporary arrays that are used for loading of data for filling TIME_ZONE_INFO structure */ my_time_t ats[TZ_MAX_TIMES]; unsigned char types[TZ_MAX_TIMES]; TRAN_TYPE_INFO ttis[TZ_MAX_TYPES]; #ifdef ABBR_ARE_USED char chars[max(TZ_MAX_CHARS + 1, (2 * (MY_TZNAME_MAX + 1)))]; #endif DBUG_ENTER("tz_load_from_open_tables"); /* Prepare tz_info for loading also let us make copy of time zone name */ if (!(alloc_buff= alloc_root(&tz_storage, sizeof(TIME_ZONE_INFO) + tz_name->length() + 1))) { sql_print_error("Out of memory while loading time zone description"); return 0; } tz_info= (TIME_ZONE_INFO *)alloc_buff; bzero(tz_info, sizeof(TIME_ZONE_INFO)); tz_name_buff= alloc_buff + sizeof(TIME_ZONE_INFO); /* By writing zero to the end we guarantee that we can call ptr() instead of c_ptr() for time zone name. */ strmake(tz_name_buff, tz_name->ptr(), tz_name->length()); /* Let us find out time zone id by its name (there is only one index and it is specifically for this purpose). */ table= tz_tables->table; tz_tables= tz_tables->next_local; table->field[0]->store(tz_name->ptr(), tz_name->length(), &my_charset_latin1); /* It is OK to ignore ha_index_init()/ha_index_end() return values since mysql.time_zone* tables are MyISAM and these operations always succeed for MyISAM. */ (void)table->file->ha_index_init(0, 1); if (table->file->index_read(table->record[0], (byte*)table->field[0]->ptr, 0, HA_READ_KEY_EXACT)) { #ifdef EXTRA_DEBUG /* Most probably user has mistyped time zone name, so no need to bark here unless we need it for debugging. */ sql_print_error("Can't find description of time zone '%s'", tz_name_buff); #endif goto end; } tzid= (uint)table->field[1]->val_int(); (void)table->file->ha_index_end(); /* Now we need to lookup record in mysql.time_zone table in order to understand whenever this timezone uses leap seconds (again we are using the only index in this table). */ table= tz_tables->table; tz_tables= tz_tables->next_local; table->field[0]->store((longlong) tzid, TRUE); (void)table->file->ha_index_init(0, 1); if (table->file->index_read(table->record[0], (byte*)table->field[0]->ptr, 0, HA_READ_KEY_EXACT)) { sql_print_error("Can't find description of time zone '%u'", tzid); goto end; } /* If Uses_leap_seconds == 'Y' */ if (table->field[1]->val_int() == 1) { tz_info->leapcnt= tz_leapcnt; tz_info->lsis= tz_lsis; } (void)table->file->ha_index_end(); /* Now we will iterate through records for out time zone in mysql.time_zone_transition_type table. Because we want records only for our time zone guess what are we doing? Right - using special index. */ table= tz_tables->table; tz_tables= tz_tables->next_local; table->field[0]->store((longlong) tzid, TRUE); (void)table->file->ha_index_init(0, 1); // FIXME Is there any better approach than explicitly specifying 4 ??? res= table->file->index_read(table->record[0], (byte*)table->field[0]->ptr, 4, HA_READ_KEY_EXACT); while (!res) { ttid= (uint)table->field[1]->val_int(); if (ttid >= TZ_MAX_TYPES) { sql_print_error("Error while loading time zone description from " "mysql.time_zone_transition_type table: too big " "transition type id"); goto end; } ttis[ttid].tt_gmtoff= (long)table->field[2]->val_int(); ttis[ttid].tt_isdst= (table->field[3]->val_int() > 0); #ifdef ABBR_ARE_USED // FIXME should we do something with duplicates here ? table->field[4]->val_str(&abbr, &abbr); if (tz_info->charcnt + abbr.length() + 1 > sizeof(chars)) { sql_print_error("Error while loading time zone description from " "mysql.time_zone_transition_type table: not enough " "room for abbreviations"); goto end; } ttis[ttid].tt_abbrind= tz_info->charcnt; memcpy(chars + tz_info->charcnt, abbr.ptr(), abbr.length()); tz_info->charcnt+= abbr.length(); chars[tz_info->charcnt]= 0; tz_info->charcnt++; DBUG_PRINT("info", ("time_zone_transition_type table: tz_id=%u tt_id=%u tt_gmtoff=%ld " "abbr='%s' tt_isdst=%u", tzid, ttid, ttis[ttid].tt_gmtoff, chars + ttis[ttid].tt_abbrind, ttis[ttid].tt_isdst)); #else DBUG_PRINT("info", ("time_zone_transition_type table: tz_id=%u tt_id=%u tt_gmtoff=%ld " "tt_isdst=%u", tzid, ttid, ttis[ttid].tt_gmtoff, ttis[ttid].tt_isdst)); #endif /* ttid is increasing because we are reading using index */ DBUG_ASSERT(ttid >= tz_info->typecnt); tz_info->typecnt= ttid + 1; res= table->file->index_next_same(table->record[0], (byte*)table->field[0]->ptr, 4); } if (res != HA_ERR_END_OF_FILE) { sql_print_error("Error while loading time zone description from " "mysql.time_zone_transition_type table"); goto end; } (void)table->file->ha_index_end(); /* At last we are doing the same thing for records in mysql.time_zone_transition table. Here we additionaly need records in ascending order by index scan also satisfies us. */ table= tz_tables->table; table->field[0]->store((longlong) tzid, TRUE); (void)table->file->ha_index_init(0, 1); // FIXME Is there any better approach than explicitly specifying 4 ??? res= table->file->index_read(table->record[0], (byte*)table->field[0]->ptr, 4, HA_READ_KEY_EXACT); while (!res) { ttime= (my_time_t)table->field[1]->val_int(); ttid= (uint)table->field[2]->val_int(); if (tz_info->timecnt + 1 > TZ_MAX_TIMES) { sql_print_error("Error while loading time zone description from " "mysql.time_zone_transition table: " "too much transitions"); goto end; } if (ttid + 1 > tz_info->typecnt) { sql_print_error("Error while loading time zone description from " "mysql.time_zone_transition table: " "bad transition type id"); goto end; } ats[tz_info->timecnt]= ttime; types[tz_info->timecnt]= ttid; tz_info->timecnt++; DBUG_PRINT("info", ("time_zone_transition table: tz_id=%u tt_time=%lld tt_id=%u", tzid, (longlong)ttime, ttid)); res= table->file->index_next_same(table->record[0], (byte*)table->field[0]->ptr, 4); } /* We have to allow HA_ERR_KEY_NOT_FOUND because some time zones for example UTC have no transitons. */ if (res != HA_ERR_END_OF_FILE && res != HA_ERR_KEY_NOT_FOUND) { sql_print_error("Error while loading time zone description from " "mysql.time_zone_transition table"); goto end; } (void)table->file->ha_index_end(); table= 0; /* Now we will allocate memory and init TIME_ZONE_INFO structure. */ if (!(alloc_buff= alloc_root(&tz_storage, ALIGN_SIZE(sizeof(my_time_t) * tz_info->timecnt) + ALIGN_SIZE(tz_info->timecnt) + #ifdef ABBR_ARE_USED ALIGN_SIZE(tz_info->charcnt) + #endif sizeof(TRAN_TYPE_INFO) * tz_info->typecnt))) { sql_print_error("Out of memory while loading time zone description"); goto end; } tz_info->ats= (my_time_t *)alloc_buff; memcpy(tz_info->ats, ats, tz_info->timecnt * sizeof(my_time_t)); alloc_buff+= ALIGN_SIZE(sizeof(my_time_t) * tz_info->timecnt); tz_info->types= (unsigned char *)alloc_buff; memcpy(tz_info->types, types, tz_info->timecnt); alloc_buff+= ALIGN_SIZE(tz_info->timecnt); #ifdef ABBR_ARE_USED tz_info->chars= alloc_buff; memcpy(tz_info->chars, chars, tz_info->charcnt); alloc_buff+= ALIGN_SIZE(tz_info->charcnt); #endif tz_info->ttis= (TRAN_TYPE_INFO *)alloc_buff; memcpy(tz_info->ttis, ttis, tz_info->typecnt * sizeof(TRAN_TYPE_INFO)); /* Let us check how correct our time zone description and build reversed map. We don't check for tz->timecnt < 1 since it ok for GMT. */ if (tz_info->typecnt < 1) { sql_print_error("loading time zone without transition types"); goto end; } if (prepare_tz_info(tz_info, &tz_storage)) { sql_print_error("Unable to build mktime map for time zone"); goto end; } if (!(tmp_tzname= new (&tz_storage) TZ_NAMES_ENTRY()) || !(tmp_tzname->tz= new (&tz_storage) Time_zone_db(tz_info, &(tmp_tzname->name))) || (tmp_tzname->name.set(tz_name_buff, tz_name->length(), &my_charset_latin1), my_hash_insert(&tz_names, (const byte *)tmp_tzname))) { sql_print_error("Out of memory while loading time zone"); goto end; } /* Loading of time zone succeeded */ return_val= tmp_tzname->tz; end: if (table) (void)table->file->ha_index_end(); DBUG_RETURN(return_val); } /* Parse string that specifies time zone as offset from UTC. SYNOPSIS str_to_offset() str - pointer to string which contains offset length - length of string offset - out parameter for storing found offset in seconds. DESCRIPTION This function parses string which contains time zone offset in form similar to '+10:00' and converts found value to seconds from UTC form (east is positive). RETURN VALUE 0 - Ok 1 - String doesn't contain valid time zone offset */ my_bool str_to_offset(const char *str, uint length, long *offset) { const char *end= str + length; my_bool negative; ulong number_tmp; long offset_tmp; if (length < 4) return 1; if (*str == '+') negative= 0; else if (*str == '-') negative= 1; else return 1; str++; number_tmp= 0; while (str < end && my_isdigit(&my_charset_latin1, *str)) { number_tmp= number_tmp*10 + *str - '0'; str++; } if (str + 1 >= end || *str != ':') return 1; str++; offset_tmp = number_tmp * MINS_PER_HOUR; number_tmp= 0; while (str < end && my_isdigit(&my_charset_latin1, *str)) { number_tmp= number_tmp * 10 + *str - '0'; str++; } if (str != end) return 1; offset_tmp= (offset_tmp + number_tmp) * SECS_PER_MIN; if (negative) offset_tmp= -offset_tmp; /* Check if offset is in range prescribed by standard (from -12:59 to 13:00). */ if (number_tmp > 59 || offset_tmp < -13 * SECS_PER_HOUR + 1 || offset_tmp > 13 * SECS_PER_HOUR) return 1; *offset= offset_tmp; return 0; } /* Get Time_zone object for specified time zone. SYNOPSIS my_tz_find() name - time zone specification tz_tables - list of opened'n'locked time zone describing tables DESCRIPTION This function checks if name is one of time zones described in db, predefined SYSTEM time zone or valid time zone specification as offset from UTC (In last case it will create proper Time_zone_offset object if there were not any.). If name is ok it returns corresponding Time_zone object. Clients of this function are not responsible for releasing resources occupied by returned Time_zone object so they can just forget pointers to Time_zone object if they are not needed longer. Other important property of this function: if some Time_zone found once it will be for sure found later, so this function can also be used for checking if proper Time_zone object exists (and if there will be error it will be reported during first call). If name pointer is 0 then this function returns 0 (this allows to pass 0 values as parameter without additional external check and this property is used by @@time_zone variable handling code). It will perform lookup in system tables (mysql.time_zone*) if needed using tz_tables as list of already opened tables (for info about this list look at tz_load_from_open_tables() description). It won't perform such lookup if no time zone describing tables were found during server start up. RETURN VALUE Pointer to corresponding Time_zone object. 0 - in case of bad time zone specification or other error. */ Time_zone * my_tz_find(const String * name, TABLE_LIST *tz_tables) { TZ_NAMES_ENTRY *tmp_tzname; Time_zone *result_tz= 0; long offset; DBUG_ENTER("my_tz_find"); DBUG_PRINT("enter", ("time zone name='%s'", name ? ((String *)name)->c_ptr() : "NULL")); DBUG_ASSERT(!time_zone_tables_exist || tz_tables || current_thd->slave_thread); if (!name) DBUG_RETURN(0); VOID(pthread_mutex_lock(&tz_LOCK)); if (!str_to_offset(name->ptr(), name->length(), &offset)) { if (!(result_tz= (Time_zone_offset *)hash_search(&offset_tzs, (const byte *)&offset, sizeof(long)))) { DBUG_PRINT("info", ("Creating new Time_zone_offset object")); if (!(result_tz= new (&tz_storage) Time_zone_offset(offset)) || my_hash_insert(&offset_tzs, (const byte *) result_tz)) { result_tz= 0; sql_print_error("Fatal error: Out of memory " "while setting new time zone"); } } } else { result_tz= 0; if ((tmp_tzname= (TZ_NAMES_ENTRY *)hash_search(&tz_names, (const byte *)name->ptr(), name->length()))) result_tz= tmp_tzname->tz; else if (time_zone_tables_exist && tz_tables) result_tz= tz_load_from_open_tables(name, tz_tables); } VOID(pthread_mutex_unlock(&tz_LOCK)); DBUG_RETURN(result_tz); } /* A more standalone version of my_tz_find(): will open tz tables if needed. This is so far only used by replication, where time zone setting does not happen in the usual query context. SYNOPSIS my_tz_find_with_opening_tz_tables() thd - pointer to thread's THD structure name - time zone specification DESCRIPTION This function tries to find a time zone which matches the named passed in argument. If it fails, it will open time zone tables and re-try the search. This function is needed for the slave SQL thread, which does not do the addition of time zone tables which is usually done during query parsing (as time zone setting by slave does not happen in mysql_parse() but before). So it needs to open tz tables by itself if needed. See notes of my_tz_find() as they also apply here. RETURN VALUE Pointer to corresponding Time_zone object. 0 - in case of bad time zone specification or other error. */ Time_zone *my_tz_find_with_opening_tz_tables(THD *thd, const String *name) { Time_zone *tz; DBUG_ENTER("my_tz_find_with_opening_tables"); DBUG_ASSERT(thd); DBUG_ASSERT(thd->slave_thread); // intended for use with slave thread only if (!(tz= my_tz_find(name, 0)) && time_zone_tables_exist) { /* Probably we have not loaded this time zone yet so let us look it up in our time zone tables. Note that if we don't have tz tables on this slave, we don't even try. */ TABLE_LIST tables[4]; TABLE_LIST *dummy; TABLE_LIST **dummyp= &dummy; tz_init_table_list(tables, &dummyp); if (simple_open_n_lock_tables(thd, tables)) DBUG_RETURN(0); tz= my_tz_find(name, tables); /* We need to close tables _now_ to not pollute coming query */ close_thread_tables(thd); } DBUG_RETURN(tz); } #endif /* !defined(TESTTIME) && !defined(TZINFO2SQL) */ #ifdef TZINFO2SQL /* This code belongs to mysql_tzinfo_to_sql converter command line utility. This utility should be used by db admin for populating mysql.time_zone tables. */ /* Print info about time zone described by TIME_ZONE_INFO struct as SQL statements populating mysql.time_zone* tables. SYNOPSIS print_tz_as_sql() tz_name - name of time zone sp - structure describing time zone */ void print_tz_as_sql(const char* tz_name, const TIME_ZONE_INFO *sp) { uint i; /* Here we assume that all time zones have same leap correction tables */ printf("INSERT INTO time_zone (Use_leap_seconds) VALUES ('%s');\n", sp->leapcnt ? "Y" : "N"); printf("SET @time_zone_id= LAST_INSERT_ID();\n"); printf("INSERT INTO time_zone_name (Name, Time_zone_id) VALUES \ ('%s', @time_zone_id);\n", tz_name); if (sp->timecnt) { printf("INSERT INTO time_zone_transition \ (Time_zone_id, Transition_time, Transition_type_id) VALUES\n"); for (i= 0; i < sp->timecnt; i++) printf("%s(@time_zone_id, %ld, %u)\n", (i == 0 ? " " : ","), sp->ats[i], (uint)sp->types[i]); printf(";\n"); } printf("INSERT INTO time_zone_transition_type \ (Time_zone_id, Transition_type_id, Offset, Is_DST, Abbreviation) VALUES\n"); for (i= 0; i < sp->typecnt; i++) printf("%s(@time_zone_id, %u, %ld, %d, '%s')\n", (i == 0 ? " " : ","), i, sp->ttis[i].tt_gmtoff, sp->ttis[i].tt_isdst, sp->chars + sp->ttis[i].tt_abbrind); printf(";\n"); } /* Print info about leap seconds in time zone as SQL statements populating mysql.time_zone_leap_second table. SYNOPSIS print_tz_leaps_as_sql() sp - structure describing time zone */ void print_tz_leaps_as_sql(const TIME_ZONE_INFO *sp) { uint i; /* We are assuming that there are only one list of leap seconds For all timezones. */ printf("TRUNCATE TABLE time_zone_leap_second;\n"); if (sp->leapcnt) { printf("INSERT INTO time_zone_leap_second \ (Transition_time, Correction) VALUES\n"); for (i= 0; i < sp->leapcnt; i++) printf("%s(%ld, %ld)\n", (i == 0 ? " " : ","), sp->lsis[i].ls_trans, sp->lsis[i].ls_corr); printf(";\n"); } printf("ALTER TABLE time_zone_leap_second ORDER BY Transition_time;\n"); } /* Some variables used as temporary or as parameters in recursive scan_tz_dir() code. */ TIME_ZONE_INFO tz_info; MEM_ROOT tz_storage; char fullname[FN_REFLEN + 1]; char *root_name_end; /* Recursively scan zoneinfo directory and print all found time zone descriptions as SQL. SYNOPSIS scan_tz_dir() name_end - pointer to end of path to directory to be searched. DESCRIPTION This auxiliary recursive function also uses several global variables as in parameters and for storing temporary values. fullname - path to directory that should be scanned. root_name_end - pointer to place in fullname where part with path to initial directory ends. current_tz_id - last used time zone id RETURN VALUE 0 - Ok, 1 - Fatal error */ my_bool scan_tz_dir(char * name_end) { MY_DIR *cur_dir; char *name_end_tmp; uint i; if (!(cur_dir= my_dir(fullname, MYF(MY_WANT_STAT)))) return 1; name_end= strmake(name_end, "/", FN_REFLEN - (name_end - fullname)); for (i= 0; i < cur_dir->number_off_files; i++) { if (cur_dir->dir_entry[i].name[0] != '.') { name_end_tmp= strmake(name_end, cur_dir->dir_entry[i].name, FN_REFLEN - (name_end - fullname)); if (MY_S_ISDIR(cur_dir->dir_entry[i].mystat->st_mode)) { if (scan_tz_dir(name_end_tmp)) { my_dirend(cur_dir); return 1; } } else if (MY_S_ISREG(cur_dir->dir_entry[i].mystat->st_mode)) { init_alloc_root(&tz_storage, 32768, 0); if (!tz_load(fullname, &tz_info, &tz_storage)) print_tz_as_sql(root_name_end + 1, &tz_info); else fprintf(stderr, "Warning: Unable to load '%s' as time zone. Skipping it.\n", fullname); free_root(&tz_storage, MYF(0)); } else fprintf(stderr, "Warning: '%s' is not regular file or directory\n", fullname); } } my_dirend(cur_dir); return 0; } int main(int argc, char **argv) { #ifndef __NETWARE__ MY_INIT(argv[0]); if (argc != 2 && argc != 3) { fprintf(stderr, "Usage:\n"); fprintf(stderr, " %s timezonedir\n", argv[0]); fprintf(stderr, " %s timezonefile timezonename\n", argv[0]); fprintf(stderr, " %s --leap timezonefile\n", argv[0]); return 1; } if (argc == 2) { root_name_end= strmake(fullname, argv[1], FN_REFLEN); printf("TRUNCATE TABLE time_zone;\n"); printf("TRUNCATE TABLE time_zone_name;\n"); printf("TRUNCATE TABLE time_zone_transition;\n"); printf("TRUNCATE TABLE time_zone_transition_type;\n"); if (scan_tz_dir(root_name_end)) { fprintf(stderr, "There were fatal errors during processing " "of zoneinfo directory\n"); return 1; } printf("ALTER TABLE time_zone_transition " "ORDER BY Time_zone_id, Transition_time;\n"); printf("ALTER TABLE time_zone_transition_type " "ORDER BY Time_zone_id, Transition_type_id;\n"); } else { init_alloc_root(&tz_storage, 32768, 0); if (strcmp(argv[1], "--leap") == 0) { if (tz_load(argv[2], &tz_info, &tz_storage)) { fprintf(stderr, "Problems with zoneinfo file '%s'\n", argv[2]); return 1; } print_tz_leaps_as_sql(&tz_info); } else { if (tz_load(argv[1], &tz_info, &tz_storage)) { fprintf(stderr, "Problems with zoneinfo file '%s'\n", argv[2]); return 1; } print_tz_as_sql(argv[2], &tz_info); } free_root(&tz_storage, MYF(0)); } #else fprintf(stderr, "This tool has not been ported to NetWare\n"); #endif /* __NETWARE__ */ return 0; } #endif /* defined(TZINFO2SQL) */ #ifdef TESTTIME /* Some simple brute-force test wich allowed to catch a pair of bugs. Also can provide interesting facts about system's time zone support implementation. */ #ifndef CHAR_BIT #define CHAR_BIT 8 #endif #ifndef TYPE_BIT #define TYPE_BIT(type) (sizeof (type) * CHAR_BIT) #endif #ifndef TYPE_SIGNED #define TYPE_SIGNED(type) (((type) -1) < 0) #endif my_bool is_equal_TIME_tm(const TIME* time_arg, const struct tm * tm_arg) { return (time_arg->year == (uint)tm_arg->tm_year+TM_YEAR_BASE) && (time_arg->month == (uint)tm_arg->tm_mon+1) && (time_arg->day == (uint)tm_arg->tm_mday) && (time_arg->hour == (uint)tm_arg->tm_hour) && (time_arg->minute == (uint)tm_arg->tm_min) && (time_arg->second == (uint)tm_arg->tm_sec) && time_arg->second_part == 0; } int main(int argc, char **argv) { my_bool localtime_negative; TIME_ZONE_INFO tz_info; struct tm tmp; TIME time_tmp; time_t t, t1, t2; char fullname[FN_REFLEN+1]; char *str_end; MEM_ROOT tz_storage; MY_INIT(argv[0]); init_alloc_root(&tz_storage, 32768, 0); /* let us set some well known timezone */ setenv("TZ", "MET", 1); tzset(); /* Some initial time zone related system info */ printf("time_t: %s %u bit\n", TYPE_SIGNED(time_t) ? "signed" : "unsigned", (uint)TYPE_BIT(time_t)); if (TYPE_SIGNED(time_t)) { t= -100; localtime_negative= test(localtime_r(&t, &tmp) != 0); printf("localtime_r %s negative params \ (time_t=%d is %d-%d-%d %d:%d:%d)\n", (localtime_negative ? "supports" : "doesn't support"), (int)t, TM_YEAR_BASE + tmp.tm_year, tmp.tm_mon + 1, tmp.tm_mday, tmp.tm_hour, tmp.tm_min, tmp.tm_sec); printf("mktime %s negative results (%d)\n", (t == mktime(&tmp) ? "doesn't support" : "supports"), (int)mktime(&tmp)); } tmp.tm_year= 103; tmp.tm_mon= 2; tmp.tm_mday= 30; tmp.tm_hour= 2; tmp.tm_min= 30; tmp.tm_sec= 0; tmp.tm_isdst= -1; t= mktime(&tmp); printf("mktime returns %s for spring time gap (%d)\n", (t != (time_t)-1 ? "something" : "error"), (int)t); tmp.tm_year= 103; tmp.tm_mon= 8; tmp.tm_mday= 1; tmp.tm_hour= 0; tmp.tm_min= 0; tmp.tm_sec= 0; tmp.tm_isdst= 0; t= mktime(&tmp); printf("mktime returns %s for non existing date (%d)\n", (t != (time_t)-1 ? "something" : "error"), (int)t); tmp.tm_year= 103; tmp.tm_mon= 8; tmp.tm_mday= 1; tmp.tm_hour= 25; tmp.tm_min=0; tmp.tm_sec=0; tmp.tm_isdst=1; t= mktime(&tmp); printf("mktime %s unnormalized input (%d)\n", (t != (time_t)-1 ? "handles" : "doesn't handle"), (int)t); tmp.tm_year= 103; tmp.tm_mon= 9; tmp.tm_mday= 26; tmp.tm_hour= 0; tmp.tm_min= 30; tmp.tm_sec= 0; tmp.tm_isdst= 1; mktime(&tmp); tmp.tm_hour= 2; tmp.tm_isdst= -1; t= mktime(&tmp); tmp.tm_hour= 4; tmp.tm_isdst= 0; mktime(&tmp); tmp.tm_hour= 2; tmp.tm_isdst= -1; t1= mktime(&tmp); printf("mktime is %s (%d %d)\n", (t == t1 ? "determenistic" : "is non-determenistic"), (int)t, (int)t1); /* Let us load time zone description */ str_end= strmake(fullname, TZDIR, FN_REFLEN); strmake(str_end, "/MET", FN_REFLEN - (str_end - fullname)); if (tz_load(fullname, &tz_info, &tz_storage)) { printf("Unable to load time zone info from '%s'\n", fullname); free_root(&tz_storage, MYF(0)); return 1; } printf("Testing our implementation\n"); if (TYPE_SIGNED(time_t) && localtime_negative) { for (t= -40000; t < 20000; t++) { localtime_r(&t, &tmp); gmt_sec_to_TIME(&time_tmp, (my_time_t)t, &tz_info); if (!is_equal_TIME_tm(&time_tmp, &tmp)) { printf("Problem with negative time_t = %d\n", (int)t); free_root(&tz_storage, MYF(0)); return 1; } } printf("gmt_sec_to_TIME = localtime for time_t in [-40000,20000) range\n"); } for (t= 1000000000; t < 1100000000; t+= 13) { localtime_r(&t,&tmp); gmt_sec_to_TIME(&time_tmp, (my_time_t)t, &tz_info); if (!is_equal_TIME_tm(&time_tmp, &tmp)) { printf("Problem with time_t = %d\n", (int)t); free_root(&tz_storage, MYF(0)); return 1; } } printf("gmt_sec_to_TIME = localtime for time_t in [1000000000,1100000000) range\n"); init_time(); /* Be careful here! my_system_gmt_sec doesn't fully handle unnormalized dates. */ for (time_tmp.year= 1980; time_tmp.year < 2010; time_tmp.year++) { for (time_tmp.month= 1; time_tmp.month < 13; time_tmp.month++) { for (time_tmp.day= 1; time_tmp.day < mon_lengths[isleap(time_tmp.year)][time_tmp.month-1]; time_tmp.day++) { for (time_tmp.hour= 0; time_tmp.hour < 24; time_tmp.hour++) { for (time_tmp.minute= 0; time_tmp.minute < 60; time_tmp.minute+= 5) { for (time_tmp.second=0; time_tmp.second<60; time_tmp.second+=25) { long not_used; my_bool not_used_2; t= (time_t)my_system_gmt_sec(&time_tmp, ¬_used, ¬_used_2); t1= (time_t)TIME_to_gmt_sec(&time_tmp, &tz_info, ¬_used_2); if (t != t1) { /* We need special handling during autumn since my_system_gmt_sec prefers greater time_t values (in MET) for ambiguity. And BTW that is a bug which should be fixed !!! */ tmp.tm_year= time_tmp.year - TM_YEAR_BASE; tmp.tm_mon= time_tmp.month - 1; tmp.tm_mday= time_tmp.day; tmp.tm_hour= time_tmp.hour; tmp.tm_min= time_tmp.minute; tmp.tm_sec= time_tmp.second; tmp.tm_isdst= 1; t2= mktime(&tmp); if (t1 == t2) continue; printf("Problem: %u/%u/%u %u:%u:%u with times t=%d, t1=%d\n", time_tmp.year, time_tmp.month, time_tmp.day, time_tmp.hour, time_tmp.minute, time_tmp.second, (int)t,(int)t1); free_root(&tz_storage, MYF(0)); return 1; } } } } } } } printf("TIME_to_gmt_sec = my_system_gmt_sec for test range\n"); free_root(&tz_storage, MYF(0)); return 0; } #endif /* defined(TESTTIME) */