/* Copyright (c) 2001, 2012, Oracle and/or its affiliates Copyright (c) 2012, Monty Program Ab This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1335 USA */ /* Note that we can't have assertion on file descriptors; The reason for this is that during mysql shutdown, another thread can close a file we are working on. In this case we should just return read errors from the file descriptior. */ #include "vio_priv.h" #ifdef __WIN__ #include #include #include #pragma comment(lib, "ws2_32.lib") #endif #include "my_context.h" #include #ifdef FIONREAD_IN_SYS_FILIO # include #endif /* Network io wait callbacks for threadpool */ static void (*before_io_wait)(void)= 0; static void (*after_io_wait)(void)= 0; /* Wait callback macros (both performance schema and threadpool */ #define START_SOCKET_WAIT(locker, state_ptr, sock, which, timeout) \ do \ { \ MYSQL_START_SOCKET_WAIT(locker, state_ptr, sock, \ which, 0); \ if (timeout && before_io_wait) \ before_io_wait(); \ } while(0) #define END_SOCKET_WAIT(locker,timeout) \ do \ { \ MYSQL_END_SOCKET_WAIT(locker, 0); \ if (timeout && after_io_wait) \ after_io_wait(); \ } while(0) void vio_set_wait_callback(void (*before_wait)(void), void (*after_wait)(void)) { before_io_wait= before_wait; after_io_wait= after_wait; } int vio_errno(Vio *vio __attribute__((unused))) { /* These transport types are not Winsock based. */ #ifdef _WIN32 if (vio->type == VIO_TYPE_NAMEDPIPE || vio->type == VIO_TYPE_SHARED_MEMORY) return GetLastError(); #endif /* Mapped to WSAGetLastError() on Win32. */ return socket_errno; } static int vio_set_linger(my_socket s, unsigned short timeout_sec) { struct linger s_linger; int ret; s_linger.l_onoff = 1; s_linger.l_linger = timeout_sec; ret = setsockopt(s, SOL_SOCKET, SO_LINGER, (const char *)&s_linger, (int)sizeof(s_linger)); return ret; } /** Attempt to wait for an I/O event on a socket. @param vio VIO object representing a connected socket. @param event The type of I/O event (read or write) to wait for. @return Return value is -1 on failure, 0 on success. */ int vio_socket_io_wait(Vio *vio, enum enum_vio_io_event event) { int timeout, ret; DBUG_ASSERT(event == VIO_IO_EVENT_READ || event == VIO_IO_EVENT_WRITE); /* Choose an appropriate timeout. */ if (event == VIO_IO_EVENT_READ) timeout= vio->read_timeout; else timeout= vio->write_timeout; /* Wait for input data to become available. */ switch (vio_io_wait(vio, event, timeout)) { case -1: /* Upon failure, vio_read/write() shall return -1. */ ret= -1; break; case 0: /* The wait timed out. */ ret= -1; vio_set_linger(vio->mysql_socket.fd, 0); break; default: /* A positive value indicates an I/O event. */ ret= 0; break; } return ret; } /* Define a stub MSG_DONTWAIT if unavailable. In this case, fcntl (or a equivalent) is used to enable non-blocking operations. The flag must be supported in both send and recv operations. */ #if defined(__linux__) #define VIO_USE_DONTWAIT 1 #define VIO_DONTWAIT MSG_DONTWAIT #else #define VIO_DONTWAIT 0 #endif /* returns number of bytes read or -1 in case of an error */ size_t vio_read(Vio *vio, uchar *buf, size_t size) { ssize_t ret; int flags= 0; DBUG_ENTER("vio_read"); DBUG_PRINT("enter", ("sd: %d buf: %p size: %zu", (int)mysql_socket_getfd(vio->mysql_socket), buf, size)); /* Ensure nobody uses vio_read_buff and vio_read simultaneously. */ DBUG_ASSERT(vio->read_end == vio->read_pos); /* If timeout is enabled, do not block if data is unavailable. */ if (vio->read_timeout >= 0) flags= VIO_DONTWAIT; if (vio->async_context && vio->async_context->active) ret= my_recv_async(vio->async_context, mysql_socket_getfd(vio->mysql_socket), buf, size, vio->read_timeout); else { if (vio->async_context) { /* If switching from non-blocking to blocking API usage, set the socket back to blocking mode. */ my_bool old_mode; vio_blocking(vio, TRUE, &old_mode); } while ((ret= mysql_socket_recv(vio->mysql_socket, (SOCKBUF_T *)buf, size, flags)) == -1) { int error= socket_errno; /* The operation would block? */ if (error != SOCKET_EAGAIN && error != SOCKET_EWOULDBLOCK) break; /* Wait for input data to become available. */ if ((ret= vio_socket_io_wait(vio, VIO_IO_EVENT_READ))) break; } } #ifndef DBUG_OFF if (ret == -1) { DBUG_PRINT("vio_error", ("Got error %d during read", errno)); } #ifndef DEBUG_DATA_PACKETS else { DBUG_DUMP("read_data", buf, ret); } #endif /* DEBUG_DATA_PACKETS */ #endif /* DBUG_OFF */ DBUG_PRINT("exit", ("%d", (int) ret)); DBUG_RETURN(ret); } /* Buffered read: if average read size is small it may reduce number of syscalls. */ size_t vio_read_buff(Vio *vio, uchar* buf, size_t size) { size_t rc; #define VIO_UNBUFFERED_READ_MIN_SIZE 2048 DBUG_ENTER("vio_read_buff"); DBUG_PRINT("enter", ("sd: %d buf: %p size:%zu", (int)mysql_socket_getfd(vio->mysql_socket), buf, size)); if (vio->read_pos < vio->read_end) { rc= MY_MIN((size_t) (vio->read_end - vio->read_pos), size); memcpy(buf, vio->read_pos, rc); vio->read_pos+= rc; /* Do not try to read from the socket now even if rc < size: vio_read can return -1 due to an error or non-blocking mode, and the safest way to handle it is to move to a separate branch. */ } else if (size < VIO_UNBUFFERED_READ_MIN_SIZE) { rc= vio_read(vio, (uchar*) vio->read_buffer, VIO_READ_BUFFER_SIZE); if (rc != 0 && rc != (size_t) -1) { if (rc > size) { vio->read_pos= vio->read_buffer + size; vio->read_end= vio->read_buffer + rc; rc= size; } memcpy(buf, vio->read_buffer, rc); } } else rc= vio_read(vio, buf, size); DBUG_RETURN(rc); #undef VIO_UNBUFFERED_READ_MIN_SIZE } my_bool vio_buff_has_data(Vio *vio) { return (vio->read_pos != vio->read_end); } size_t vio_write(Vio *vio, const uchar* buf, size_t size) { ssize_t ret; int flags= 0; DBUG_ENTER("vio_write"); DBUG_PRINT("enter", ("sd: %d buf: %p size: %zu", (int)mysql_socket_getfd(vio->mysql_socket), buf, size)); /* If timeout is enabled, do not block. */ if (vio->write_timeout >= 0) flags= VIO_DONTWAIT; if (vio->async_context && vio->async_context->active) ret= my_send_async(vio->async_context, mysql_socket_getfd(vio->mysql_socket), buf, size, vio->write_timeout); else { if (vio->async_context) { /* If switching from non-blocking to blocking API usage, set the socket back to blocking mode. */ my_bool old_mode; vio_blocking(vio, TRUE, &old_mode); } while ((ret= mysql_socket_send(vio->mysql_socket, (SOCKBUF_T *)buf, size, flags)) == -1) { int error= socket_errno; /* The operation would block? */ if (error != SOCKET_EAGAIN && error != SOCKET_EWOULDBLOCK) break; /* Wait for the output buffer to become writable.*/ if ((ret= vio_socket_io_wait(vio, VIO_IO_EVENT_WRITE))) break; } } #ifndef DBUG_OFF if (ret == -1) { DBUG_PRINT("vio_error", ("Got error on write: %d",socket_errno)); } #endif /* DBUG_OFF */ DBUG_PRINT("exit", ("%d", (int) ret)); DBUG_RETURN(ret); } int vio_socket_shutdown(Vio *vio, int how) { int ret= shutdown(mysql_socket_getfd(vio->mysql_socket), how); #ifdef _WIN32 /* Cancel possible IO in progress (shutdown does not do that on Windows). */ (void) CancelIoEx((HANDLE)mysql_socket_getfd(vio->mysql_socket), NULL); #endif return ret; } int vio_blocking(Vio *vio, my_bool set_blocking_mode, my_bool *old_mode) { int r= 0; #if defined(__WIN__) || !defined(NO_FCNTL_NONBLOCK) my_socket sd= mysql_socket_getfd(vio->mysql_socket); #endif DBUG_ENTER("vio_blocking"); *old_mode= MY_TEST(!(vio->fcntl_mode & O_NONBLOCK)); DBUG_PRINT("enter", ("set_blocking_mode: %d old_mode: %d", (int) set_blocking_mode, (int) *old_mode)); #if !defined(__WIN__) #if !defined(NO_FCNTL_NONBLOCK) if (sd >= 0) { int old_fcntl= vio->fcntl_mode; if (set_blocking_mode) vio->fcntl_mode &= ~O_NONBLOCK; /* clear bit */ else vio->fcntl_mode |= O_NONBLOCK; /* set bit */ if (old_fcntl != vio->fcntl_mode) { r= fcntl(sd, F_SETFL, vio->fcntl_mode); if (r == -1) { DBUG_PRINT("info", ("fcntl failed, errno %d", errno)); vio->fcntl_mode= old_fcntl; } } } #else r= set_blocking_mode ? 0 : 1; #endif /* !defined(NO_FCNTL_NONBLOCK) */ #else /* !defined(__WIN__) */ if (vio->type != VIO_TYPE_NAMEDPIPE && vio->type != VIO_TYPE_SHARED_MEMORY) { ulong arg; int old_fcntl=vio->fcntl_mode; if (set_blocking_mode) { arg = 0; vio->fcntl_mode &= ~O_NONBLOCK; /* clear bit */ } else { arg = 1; vio->fcntl_mode |= O_NONBLOCK; /* set bit */ } if (old_fcntl != vio->fcntl_mode) r = ioctlsocket(sd,FIONBIO,(void*) &arg); } else r= MY_TEST(!(vio->fcntl_mode & O_NONBLOCK)) != set_blocking_mode; #endif /* !defined(__WIN__) */ DBUG_PRINT("exit", ("%d", r)); DBUG_RETURN(r); } /* Check if vio is blocking @retval 0 is not blocking @retval 1 is blocking */ my_bool vio_is_blocking(Vio * vio) { my_bool r; DBUG_ENTER("vio_is_blocking"); r = !(vio->fcntl_mode & O_NONBLOCK); DBUG_PRINT("exit", ("%d", (int) r)); DBUG_RETURN(r); } int vio_socket_timeout(Vio *vio, uint which __attribute__((unused)), my_bool old_mode __attribute__((unused))) { int ret= 0; DBUG_ENTER("vio_socket_timeout"); /* The MSG_DONTWAIT trick is not used with SSL sockets as the send and receive I/O operations are wrapped through SSL-specific functions (SSL_read and SSL_write) which are not equivalent to the standard recv(2) and send(2) used in vio_read() and vio_write(). Hence, the socket blocking mode is changed and vio_io_wait() is used to wait for I/O or timeout. */ #ifdef VIO_USE_DONTWAIT if (vio->type == VIO_TYPE_SSL) #endif { /* Deduce what should be the new blocking mode of the socket. */ my_bool new_mode= vio->write_timeout < 0 && vio->read_timeout < 0; my_bool not_used; /* If necessary, update the blocking mode. */ if (new_mode != old_mode) ret= vio_blocking(vio, new_mode, ¬_used); } DBUG_RETURN(ret); } int vio_fastsend(Vio * vio __attribute__((unused))) { int r=0; DBUG_ENTER("vio_fastsend"); if (vio->type == VIO_TYPE_NAMEDPIPE ||vio->type == VIO_TYPE_SHARED_MEMORY) { DBUG_RETURN(0); } #if defined(IPTOS_THROUGHPUT) { int tos = IPTOS_THROUGHPUT; r= mysql_socket_setsockopt(vio->mysql_socket, IPPROTO_IP, IP_TOS, (void *)&tos, sizeof(tos)); } #endif /* IPTOS_THROUGHPUT */ if (!r) { #ifdef __WIN__ BOOL nodelay= 1; #else int nodelay = 1; #endif r= mysql_socket_setsockopt(vio->mysql_socket, IPPROTO_TCP, TCP_NODELAY, IF_WIN((const char*), (void*)) &nodelay, sizeof(nodelay)); } if (r) { DBUG_PRINT("warning", ("Couldn't set socket option for fast send, error %d", socket_errno)); r= -1; } DBUG_PRINT("exit", ("%d", r)); DBUG_RETURN(r); } int vio_keepalive(Vio* vio, my_bool set_keep_alive) { int r=0; uint opt = 0; DBUG_ENTER("vio_keepalive"); DBUG_PRINT("enter", ("sd: %d set_keep_alive: %d", (int)mysql_socket_getfd(vio->mysql_socket), (int)set_keep_alive)); if (vio->type != VIO_TYPE_NAMEDPIPE && vio->type != VIO_TYPE_SHARED_MEMORY) { if (set_keep_alive) opt = 1; r = mysql_socket_setsockopt(vio->mysql_socket, SOL_SOCKET, SO_KEEPALIVE, (char *)&opt, sizeof(opt)); } DBUG_RETURN(r); } /* Set socket options for keepalive e.g., TCP_KEEPCNT, TCP_KEEPIDLE/TCP_KEEPALIVE, TCP_KEEPINTVL */ int vio_set_keepalive_options(Vio* vio, const struct vio_keepalive_opts *opts) { #if defined _WIN32 struct tcp_keepalive s; DWORD nbytes; if (vio->type == VIO_TYPE_NAMEDPIPE || vio->type == VIO_TYPE_SHARED_MEMORY) return 0; if (!opts->idle && !opts->interval) return 0; s.onoff= 1; s.keepalivetime= opts->idle? opts->idle * 1000 : 7200; s.keepaliveinterval= opts->interval?opts->interval * 1000 : 1; return WSAIoctl(vio->mysql_socket.fd, SIO_KEEPALIVE_VALS, (LPVOID) &s, sizeof(s), NULL, 0, &nbytes, NULL, NULL); #elif defined (TCP_KEEPIDLE) || defined (TCP_KEEPALIVE) int ret= 0; if (opts->idle) { #ifdef TCP_KEEPIDLE // Linux only ret= mysql_socket_setsockopt(vio->mysql_socket, IPPROTO_TCP, TCP_KEEPIDLE, (char *)&opts->idle, sizeof(opts->idle)); #elif defined (TCP_KEEPALIVE) ret= mysql_socket_setsockopt(vio->mysql_socket, IPPROTO_TCP, TCP_KEEPALIVE, (char *)&opts->idle, sizeof(opts->idle)); #endif if(ret) return ret; } #ifdef TCP_KEEPCNT // Linux only if(opts->probes) { ret= mysql_socket_setsockopt(vio->mysql_socket, IPPROTO_TCP, TCP_KEEPCNT, (char *)&opts->probes, sizeof(opts->probes)); if(ret) return ret; } #endif #ifdef TCP_KEEPINTVL // Linux only if(opts->interval) { ret= mysql_socket_setsockopt(vio->mysql_socket, IPPROTO_TCP, TCP_KEEPINTVL, (char *)&opts->interval, sizeof(opts->interval)); } #endif return ret; #else /*TCP_KEEPIDLE || TCP_KEEPALIVE */ return -1; #endif } /** Indicate whether a I/O operation must be retried later. @param vio A VIO object @return Whether a I/O operation should be deferred. @retval TRUE Temporary failure, retry operation. @retval FALSE Indeterminate failure. */ my_bool vio_should_retry(Vio *vio) { DBUG_ENTER("vio_should_retry"); DBUG_PRINT("info", ("vio_errno: %d", vio_errno(vio))); DBUG_RETURN(vio_errno(vio) == SOCKET_EINTR); } /** Indicate whether a I/O operation timed out. @param vio A VIO object @return Whether a I/O operation timed out. @retval TRUE Operation timed out. @retval FALSE Not a timeout failure. */ my_bool vio_was_timeout(Vio *vio) { return (vio_errno(vio) == SOCKET_ETIMEDOUT); } int vio_close(Vio *vio) { int r=0; DBUG_ENTER("vio_close"); DBUG_PRINT("enter", ("sd: %d", (int)mysql_socket_getfd(vio->mysql_socket))); if (vio->type != VIO_CLOSED) { DBUG_ASSERT(vio->type == VIO_TYPE_TCPIP || vio->type == VIO_TYPE_SOCKET || vio->type == VIO_TYPE_SSL); DBUG_ASSERT(mysql_socket_getfd(vio->mysql_socket) >= 0); if (mysql_socket_close(vio->mysql_socket)) r= -1; } if (r) { DBUG_PRINT("vio_error", ("close() failed, error: %d",socket_errno)); /* FIXME: error handling (not critical for MySQL) */ } vio->type= VIO_CLOSED; vio->mysql_socket= MYSQL_INVALID_SOCKET; DBUG_RETURN(r); } const char *vio_description(Vio * vio) { return vio->desc; } enum enum_vio_type vio_type(Vio* vio) { return vio->type; } my_socket vio_fd(Vio* vio) { return mysql_socket_getfd(vio->mysql_socket); } /** Convert a sock-address (AF_INET or AF_INET6) into the "normalized" form, which is the IPv4 form for IPv4-mapped or IPv4-compatible IPv6 addresses. @note Background: when IPv4 and IPv6 are used simultaneously, IPv4 addresses may be written in a form of IPv4-mapped or IPv4-compatible IPv6 addresses. That means, one address (a.b.c.d) can be written in three forms: - IPv4: a.b.c.d; - IPv4-compatible IPv6: ::a.b.c.d; - IPv4-mapped IPv4: ::ffff:a.b.c.d; Having three forms of one address makes it a little difficult to compare addresses with each other (the IPv4-compatible IPv6-address of foo.bar will be different from the IPv4-mapped IPv6-address of foo.bar). @note This function can be made public when it's needed. @param src [in] source IP address (AF_INET or AF_INET6). @param src_length [in] length of the src. @param dst [out] a buffer to store normalized IP address (sockaddr_storage). @param dst_length [out] optional - actual length of the normalized IP address. */ void vio_get_normalized_ip(const struct sockaddr *src, size_t src_length, struct sockaddr *dst) { switch (src->sa_family) { case AF_INET: memcpy(dst, src, src_length); break; #ifdef HAVE_IPV6 case AF_INET6: { const struct sockaddr_in6 *src_addr6= (const struct sockaddr_in6 *) src; const struct in6_addr *src_ip6= &(src_addr6->sin6_addr); const uint32 *src_ip6_int32= (uint32 *) src_ip6->s6_addr; if (IN6_IS_ADDR_V4MAPPED(src_ip6) || IN6_IS_ADDR_V4COMPAT(src_ip6)) { struct sockaddr_in *dst_ip4= (struct sockaddr_in *) dst; /* This is an IPv4-mapped or IPv4-compatible IPv6 address. It should be converted to the IPv4 form. */ memset(dst_ip4, 0, sizeof (struct sockaddr_in)); dst_ip4->sin_family= AF_INET; dst_ip4->sin_port= src_addr6->sin6_port; /* In an IPv4 mapped or compatible address, the last 32 bits represent the IPv4 address. The byte orders for IPv6 and IPv4 addresses are the same, so a simple copy is possible. */ dst_ip4->sin_addr.s_addr= src_ip6_int32[3]; } else { /* This is a "native" IPv6 address. */ memcpy(dst, src, src_length); } break; } #endif /* HAVE_IPV6 */ } } /** Return the normalized IP address string for a sock-address. The idea is to return an IPv4-address for an IPv4-mapped and IPv4-compatible IPv6 address. The function writes the normalized IP address to the given buffer. The buffer should have enough space, otherwise error flag is returned. The system constant INET6_ADDRSTRLEN can be used to reserve buffers of the right size. @param addr [in] sockaddr object (AF_INET or AF_INET6). @param addr_length [in] length of the addr. @param ip_string [out] buffer to write normalized IP address. @param ip_string_size [in] size of the ip_string. @return Error status. @retval TRUE in case of error (the ip_string buffer is not enough). @retval FALSE on success. */ my_bool vio_get_normalized_ip_string(const struct sockaddr *addr, size_t addr_length, char *ip_string, size_t ip_string_size) { struct sockaddr_storage norm_addr_storage; struct sockaddr *norm_addr= (struct sockaddr *) &norm_addr_storage; int err_code; vio_get_normalized_ip(addr, addr_length, norm_addr); err_code= vio_getnameinfo(norm_addr, ip_string, ip_string_size, NULL, 0, NI_NUMERICHOST); if (!err_code) return FALSE; DBUG_PRINT("error", ("getnameinfo() failed with %d (%s).", (int) err_code, (const char *) gai_strerror(err_code))); return TRUE; } /** Return IP address and port of a VIO client socket. The function returns an IPv4 address if IPv6 support is disabled. The function returns an IPv4 address if the client socket is associated with an IPv4-compatible or IPv4-mapped IPv6 address. Otherwise, the native IPv6 address is returned. */ my_bool vio_peer_addr(Vio *vio, char *ip_buffer, uint16 *port, size_t ip_buffer_size) { DBUG_ENTER("vio_peer_addr"); DBUG_PRINT("enter", ("Client socked fd: %d", (int)mysql_socket_getfd(vio->mysql_socket))); if (vio->localhost) { /* Initialize vio->remote and vio->addLen. Set vio->remote to IPv4 loopback address. */ struct in_addr *ip4= &((struct sockaddr_in *) &(vio->remote))->sin_addr; vio->remote.ss_family= AF_INET; ip4->s_addr= htonl(INADDR_LOOPBACK); /* Initialize ip_buffer and port. */ strmov(ip_buffer, "127.0.0.1"); *port= 0; } else { int err_code; char port_buffer[NI_MAXSERV]; struct sockaddr_storage addr_storage; struct sockaddr *addr= (struct sockaddr *) &addr_storage; size_socket addr_length= sizeof (addr_storage); /* Get sockaddr by socked fd. */ err_code= mysql_socket_getpeername(vio->mysql_socket, addr, &addr_length); if (err_code) { DBUG_PRINT("exit", ("getpeername() gave error: %d", socket_errno)); DBUG_RETURN(TRUE); } /* Normalize IP address. */ vio_get_normalized_ip(addr, addr_length, (struct sockaddr *) &vio->remote); /* Get IP address & port number. */ err_code= vio_getnameinfo((struct sockaddr *) &vio->remote, ip_buffer, ip_buffer_size, port_buffer, NI_MAXSERV, NI_NUMERICHOST | NI_NUMERICSERV); if (err_code) { DBUG_PRINT("exit", ("getnameinfo() gave error: %s", gai_strerror(err_code))); DBUG_RETURN(TRUE); } *port= (uint16) strtol(port_buffer, NULL, 10); } DBUG_PRINT("exit", ("Client IP address: %s; port: %d", (const char *) ip_buffer, (int) *port)); DBUG_RETURN(FALSE); } /** Retrieve the amount of data that can be read from a socket. @param vio A VIO object. @param bytes[out] The amount of bytes available. @retval FALSE Success. @retval TRUE Failure. */ // WL#4896: Not covered static my_bool socket_peek_read(Vio *vio, uint *bytes) { my_socket sd= mysql_socket_getfd(vio->mysql_socket); #if defined(_WIN32) u_long len; if (ioctlsocket(sd, FIONREAD, &len)) return TRUE; *bytes= len; return FALSE; #elif defined(FIONREAD_IN_SYS_IOCTL) || defined(FIONREAD_IN_SYS_FILIO) int len; if (ioctl(sd, FIONREAD, &len) < 0) return TRUE; *bytes= len; return FALSE; #else char buf[1024]; ssize_t res= recv(sd, &buf, sizeof(buf), MSG_PEEK); if (res < 0) return TRUE; *bytes= res; return FALSE; #endif /*_WIN32*/ } #ifndef _WIN32 /** Set of event flags grouped by operations. */ /* Linux specific flag used to detect connection shutdown. The flag is also used for half-closed notification, which here is interpreted as if there is data available to be read from the socket. */ #ifndef POLLRDHUP #define POLLRDHUP 0 #endif /* Data may be read. */ #define MY_POLL_SET_IN (POLLIN | POLLPRI) /* Data may be written. */ #define MY_POLL_SET_OUT (POLLOUT) /* An error or hangup. */ #define MY_POLL_SET_ERR (POLLERR | POLLHUP | POLLNVAL) #endif /* _WIN32 */ /** Wait for an I/O event on a VIO socket. @param vio VIO object representing a connected socket. @param event The type of I/O event to wait for. @param timeout Interval (in milliseconds) to wait for an I/O event. A negative timeout value means an infinite timeout. @remark socket_errno is set to SOCKET_ETIMEDOUT on timeout. @return A three-state value which indicates the operation status. @retval -1 Failure, socket_errno indicates the error. @retval 0 The wait has timed out. @retval 1 The requested I/O event has occurred. */ #ifndef _WIN32 int vio_io_wait(Vio *vio, enum enum_vio_io_event event, int timeout) { int ret; short revents __attribute__((unused)) = 0; struct pollfd pfd; my_socket sd= mysql_socket_getfd(vio->mysql_socket); MYSQL_SOCKET_WAIT_VARIABLES(locker, state) /* no ';' */ DBUG_ENTER("vio_io_wait"); DBUG_PRINT("enter", ("timeout: %d", timeout)); /* Note that if zero timeout, then we will not block, so we do not need to yield to calling application in the async case. */ if (timeout != 0 && vio->async_context && vio->async_context->active) { START_SOCKET_WAIT(locker, &state, vio->mysql_socket, PSI_SOCKET_SELECT, timeout); ret= my_io_wait_async(vio->async_context, event, timeout); if (ret == 0) { DBUG_PRINT("info", ("timeout")); errno= SOCKET_ETIMEDOUT; } END_SOCKET_WAIT(locker,timeout); DBUG_RETURN(ret); } memset(&pfd, 0, sizeof(pfd)); pfd.fd= sd; /* Set the poll bitmask describing the type of events. The error flags are only valid in the revents bitmask. */ switch (event) { case VIO_IO_EVENT_READ: pfd.events= MY_POLL_SET_IN; revents= MY_POLL_SET_IN | MY_POLL_SET_ERR | POLLRDHUP; break; case VIO_IO_EVENT_WRITE: case VIO_IO_EVENT_CONNECT: pfd.events= MY_POLL_SET_OUT; revents= MY_POLL_SET_OUT | MY_POLL_SET_ERR; break; } START_SOCKET_WAIT(locker, &state, vio->mysql_socket, PSI_SOCKET_SELECT, timeout); /* Wait for the I/O event and return early in case of error or timeout. */ switch ((ret= poll(&pfd, 1, timeout))) { case -1: DBUG_PRINT("error", ("poll returned -1")); /* On error, -1 is returned. */ break; case 0: /* Set errno to indicate a timeout error. (This is not compiled in on WIN32.) */ DBUG_PRINT("info", ("poll timeout")); errno= SOCKET_ETIMEDOUT; break; default: /* Ensure that the requested I/O event has completed. */ DBUG_ASSERT(pfd.revents & revents); break; } END_SOCKET_WAIT(locker, timeout); DBUG_RETURN(ret); } #else int vio_io_wait(Vio *vio, enum enum_vio_io_event event, int timeout) { int ret; struct timeval tm; my_socket fd= mysql_socket_getfd(vio->mysql_socket); fd_set readfds, writefds, exceptfds; MYSQL_SOCKET_WAIT_VARIABLES(locker, state) /* no ';' */ DBUG_ENTER("vio_io_wait"); /* Note that if zero timeout, then we will not block, so we do not need to yield to calling application in the async case. */ if (timeout != 0 && vio->async_context && vio->async_context->active) { START_SOCKET_WAIT(locker, &state, vio->mysql_socket, PSI_SOCKET_SELECT, timeout); ret= my_io_wait_async(vio->async_context, event, timeout); if (ret == 0) WSASetLastError(SOCKET_ETIMEDOUT); END_SOCKET_WAIT(locker, timeout); DBUG_RETURN(ret); } /* Convert the timeout, in milliseconds, to seconds and microseconds. */ if (timeout >= 0) { tm.tv_sec= timeout / 1000; tm.tv_usec= (timeout % 1000) * 1000; } FD_ZERO(&readfds); FD_ZERO(&writefds); FD_ZERO(&exceptfds); /* Always receive notification of exceptions. */ FD_SET(fd, &exceptfds); switch (event) { case VIO_IO_EVENT_READ: /* Readiness for reading. */ FD_SET(fd, &readfds); break; case VIO_IO_EVENT_WRITE: case VIO_IO_EVENT_CONNECT: /* Readiness for writing. */ FD_SET(fd, &writefds); break; } START_SOCKET_WAIT(locker, &state, vio->mysql_socket, PSI_SOCKET_SELECT, timeout); /* The first argument is ignored on Windows. */ ret= select(0, &readfds, &writefds, &exceptfds, (timeout >= 0) ? &tm : NULL); END_SOCKET_WAIT(locker, timeout); /* Set error code to indicate a timeout error. */ if (ret == 0) WSASetLastError(SOCKET_ETIMEDOUT); /* Error or timeout? */ if (ret <= 0) DBUG_RETURN(ret); /* The requested I/O event is ready? */ switch (event) { case VIO_IO_EVENT_READ: ret= MY_TEST(FD_ISSET(fd, &readfds)); break; case VIO_IO_EVENT_WRITE: case VIO_IO_EVENT_CONNECT: ret= MY_TEST(FD_ISSET(fd, &writefds)); break; } /* Error conditions pending? */ ret|= MY_TEST(FD_ISSET(fd, &exceptfds)); /* Not a timeout, ensure that a condition was met. */ DBUG_ASSERT(ret); DBUG_RETURN(ret); } #endif /* _WIN32 */ /** Connect to a peer address. @param vio A VIO object. @param addr Socket address containing the peer address. @param len Length of socket address. @param timeout Interval (in milliseconds) to wait until a connection is established. @retval FALSE A connection was successfully established. @retval TRUE A fatal error. See socket_errno. */ my_bool vio_socket_connect(Vio *vio, struct sockaddr *addr, socklen_t len, int timeout) { int ret, wait; my_bool not_used; DBUG_ENTER("vio_socket_connect"); /* Only for socket-based transport types. */ DBUG_ASSERT(vio->type == VIO_TYPE_SOCKET || vio->type == VIO_TYPE_TCPIP); /* If timeout is not infinite, set socket to non-blocking mode. */ if ((timeout > -1) && vio_blocking(vio, FALSE, ¬_used)) DBUG_RETURN(TRUE); /* Initiate the connection. */ ret= mysql_socket_connect(vio->mysql_socket, addr, len); #ifdef _WIN32 wait= (ret == SOCKET_ERROR) && (WSAGetLastError() == WSAEINPROGRESS || WSAGetLastError() == WSAEWOULDBLOCK); #else wait= (ret == -1) && (errno == EINPROGRESS || errno == EALREADY); #endif /* The connection is in progress. The vio_io_wait() call can be used to wait up to a specified period of time for the connection to succeed. If vio_io_wait() returns 0 (after waiting however many seconds), the socket never became writable (host is probably unreachable.) Otherwise, if vio_io_wait() returns 1, then one of two conditions exist: 1. An error occurred. Use getsockopt() to check for this. 2. The connection was set up successfully: getsockopt() will return 0 as an error. */ if (wait && (vio_io_wait(vio, VIO_IO_EVENT_CONNECT, timeout) == 1)) { int error; IF_WIN(int, socklen_t) optlen= sizeof(error); IF_WIN(char, void) *optval= (IF_WIN(char, void) *) &error; /* At this point, we know that something happened on the socket. But this does not means that everything is alright. The connect might have failed. We need to retrieve the error code from the socket layer. We must return success only if we are sure that it was really a success. Otherwise we might prevent the caller from trying another address to connect to. */ if (!(ret= mysql_socket_getsockopt(vio->mysql_socket, SOL_SOCKET, SO_ERROR, optval, &optlen))) { #ifdef _WIN32 WSASetLastError(error); #else errno= error; #endif ret= MY_TEST(error); } } /* If necessary, restore the blocking mode, but only if connect succeeded. */ if ((timeout > -1) && (ret == 0)) { my_bool not_used; if (vio_blocking(vio, TRUE, ¬_used)) DBUG_RETURN(TRUE); } DBUG_RETURN(MY_TEST(ret)); } /** Determine if the endpoint of a connection is still available. @remark The socket is assumed to be disconnected if an EOF condition is encountered. @param vio The VIO object. @retval TRUE EOF condition not found. @retval FALSE EOF condition is signaled. */ my_bool vio_is_connected(Vio *vio) { uint bytes= 0; DBUG_ENTER("vio_is_connected"); /* The first step of detecting an EOF condition is verifying whether there is data to read. Data in this case would be the EOF. An exceptional condition event and/or errors are interpreted as if there is data to read. */ if (!vio_io_wait(vio, VIO_IO_EVENT_READ, 0)) DBUG_RETURN(TRUE); /* The second step is read() or recv() from the socket returning 0 (EOF). Unfortunately, it's not possible to call read directly as we could inadvertently read meaningful connection data. Simulate a read by retrieving the number of bytes available to read -- 0 meaning EOF. In the presence of unrecoverable errors, the socket is assumed to be disconnected. */ while (socket_peek_read(vio, &bytes)) { if (socket_errno != SOCKET_EINTR) DBUG_RETURN(FALSE); } #ifdef HAVE_OPENSSL /* There might be buffered data at the SSL layer. */ if (!bytes && vio->type == VIO_TYPE_SSL) bytes= SSL_pending((SSL*) vio->ssl_arg); #endif DBUG_RETURN(bytes ? TRUE : FALSE); } #ifndef DBUG_OFF /** Number of bytes in the read or socket buffer @remark An EOF condition might count as one readable byte. @return number of bytes in one of the buffers or < 0 if error. */ ssize_t vio_pending(Vio *vio) { uint bytes= 0; /* Data pending on the read buffer. */ if (vio->read_pos < vio->read_end) return vio->read_end - vio->read_pos; /* Skip non-socket based transport types. */ if (vio->type == VIO_TYPE_TCPIP || vio->type == VIO_TYPE_SOCKET) { /* Obtain number of readable bytes in the socket buffer. */ if (socket_peek_read(vio, &bytes)) return -1; } /* SSL not checked due to a yaSSL bug in SSL_pending that causes it to attempt to read from the socket. */ return (ssize_t) bytes; } #endif /* DBUG_OFF */ /** Checks if the error code, returned by vio_getnameinfo(), means it was the "No-name" error. Windows-specific note: getnameinfo() returns WSANO_DATA instead of EAI_NODATA or EAI_NONAME when no reverse mapping is available at the host (i.e. Windows can't get hostname by IP-address). This error should be treated as EAI_NONAME. @return if the error code is actually EAI_NONAME. @retval true if the error code is EAI_NONAME. @retval false otherwise. */ my_bool vio_is_no_name_error(int err_code) { #ifdef _WIN32 return err_code == WSANO_DATA || err_code == EAI_NONAME; #else return err_code == EAI_NONAME; #endif } /** This is a wrapper for the system getnameinfo(), because different OS differ in the getnameinfo() implementation: - Solaris 10 requires that the 2nd argument (salen) must match the actual size of the struct sockaddr_storage passed to it; - Mac OS X has sockaddr_in::sin_len and sockaddr_in6::sin6_len and requires them to be filled. */ int vio_getnameinfo(const struct sockaddr *sa, char *hostname, size_t hostname_size, char *port, size_t port_size, int flags) { int sa_length= 0; switch (sa->sa_family) { case AF_INET: sa_length= sizeof (struct sockaddr_in); #ifdef HAVE_SOCKADDR_IN_SIN_LEN ((struct sockaddr_in *) sa)->sin_len= sa_length; #endif /* HAVE_SOCKADDR_IN_SIN_LEN */ break; #ifdef HAVE_IPV6 case AF_INET6: sa_length= sizeof (struct sockaddr_in6); # ifdef HAVE_SOCKADDR_IN6_SIN6_LEN ((struct sockaddr_in6 *) sa)->sin6_len= sa_length; # endif /* HAVE_SOCKADDR_IN6_SIN6_LEN */ break; #endif /* HAVE_IPV6 */ } return getnameinfo(sa, sa_length, hostname, (uint)hostname_size, port, (uint)port_size, flags); }