Add failfast support.

Allow per-device "failfast" flag to be set when creating an
array or adding devices to an array.

When re-adding a device which had the failfast flag, it can be removed
using --nofailfast.

failfast status is printed in --detail and --examine output.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>

12 files changed, 148 insertions, 6 deletions

diff --git a/Create.c b/Create.c
index 1594a39..bd114ea 100644
--- a/Create.c
+++ b/Create.c
@@ -890,6 +890,8 @@ int Create(struct supertype *st, char *mddev,
 
 				if (dv->writemostly == 1)
 					inf->disk.state |= (1<<MD_DISK_WRITEMOSTLY);
+				if (dv->failfast == 1)
+					inf->disk.state |= (1<<MD_DISK_FAILFAST);
 
 				if (have_container)
 					fd = -1;
diff --git a/Detail.c b/Detail.c
index 925e479..509b0d4 100644
--- a/Detail.c
+++ b/Detail.c
@@ -658,6 +658,7 @@ This is pretty boring
 			}
 			if (disk.state & (1<<MD_DISK_REMOVED)) printf(" removed");
 			if (disk.state & (1<<MD_DISK_WRITEMOSTLY)) printf(" writemostly");
+			if (disk.state & (1<<MD_DISK_FAILFAST)) printf(" failfast");
 			if (disk.state & (1<<MD_DISK_JOURNAL)) printf(" journal");
 			if ((disk.state &
 			     ((1<<MD_DISK_ACTIVE)|(1<<MD_DISK_SYNC)
diff --git a/Incremental.c b/Incremental.c
index cc01d41..75d95cc 100644
--- a/Incremental.c
+++ b/Incremental.c
@@ -1035,6 +1035,7 @@ static int array_try_spare(char *devname, int *dfdp, struct dev_policy *pol,
 			devlist.next = NULL;
 			devlist.used = 0;
 			devlist.writemostly = 0;
+			devlist.failfast = 0;
 			devlist.devname = chosen_devname;
 			sprintf(chosen_devname, "%d:%d", major(stb.st_rdev),
 				minor(stb.st_rdev));
diff --git a/Manage.c b/Manage.c
index 1b7b0c1..429d863 100644
--- a/Manage.c
+++ b/Manage.c
@@ -683,8 +683,13 @@ int attempt_re_add(int fd, int tfd, struct mddev_dev *dv,
 			disc.state |= 1 << MD_DISK_WRITEMOSTLY;
 		if (dv->writemostly == 2)
 			disc.state &= ~(1 << MD_DISK_WRITEMOSTLY);
+		if (dv->failfast == 1)
+			disc.state |= 1 << MD_DISK_FAILFAST;
+		if (dv->failfast == 2)
+			disc.state &= ~(1 << MD_DISK_FAILFAST);
 		remove_partitions(tfd);
-		if (update || dv->writemostly > 0) {
+		if (update || dv->writemostly > 0
+			|| dv->failfast > 0) {
 			int rv = -1;
 			tfd = dev_open(dv->devname, O_RDWR);
 			if (tfd < 0) {
@@ -700,6 +705,14 @@ int attempt_re_add(int fd, int tfd, struct mddev_dev *dv,
 				rv = dev_st->ss->update_super(
 					dev_st, NULL, "readwrite",
 					devname, verbose, 0, NULL);
+			if (dv->failfast == 1)
+				rv = dev_st->ss->update_super(
+					dev_st, NULL, "failfast",
+					devname, verbose, 0, NULL);
+			if (dv->failfast == 2)
+				rv = dev_st->ss->update_super(
+					dev_st, NULL, "nofailfast",
+					devname, verbose, 0, NULL);
 			if (update)
 				rv = dev_st->ss->update_super(
 					dev_st, NULL, update,
@@ -964,6 +977,8 @@ int Manage_add(int fd, int tfd, struct mddev_dev *dv,
 			disc.state |= (1 << MD_DISK_JOURNAL) | (1 << MD_DISK_SYNC);
 		if (dv->writemostly == 1)
 			disc.state |= 1 << MD_DISK_WRITEMOSTLY;
+		if (dv->failfast == 1)
+			disc.state |= 1 << MD_DISK_FAILFAST;
 		dfd = dev_open(dv->devname, O_RDWR | O_EXCL|O_DIRECT);
 		if (tst->ss->add_to_super(tst, &disc, dfd,
 					  dv->devname, INVALID_SECTORS))
@@ -1009,6 +1024,8 @@ int Manage_add(int fd, int tfd, struct mddev_dev *dv,
 
 	if (dv->writemostly == 1)
 		disc.state |= (1 << MD_DISK_WRITEMOSTLY);
+	if (dv->failfast == 1)
+		disc.state |= (1 << MD_DISK_FAILFAST);
 	if (tst->ss->external) {
 		/* add a disk
 		 * to an external metadata container */
@@ -1785,6 +1802,7 @@ int move_spare(char *from_devname, char *to_devname, dev_t devid)
 	devlist.next = NULL;
 	devlist.used = 0;
 	devlist.writemostly = 0;
+	devlist.failfast = 0;
 	devlist.devname = devname;
 	sprintf(devname, "%d:%d", major(devid), minor(devid));
 
diff --git a/ReadMe.c b/ReadMe.c
index d3fcb61..8da49ef 100644
--- a/ReadMe.c
+++ b/ReadMe.c
@@ -136,6 +136,8 @@ struct option long_options[] = {
     {"bitmap-chunk", 1, 0, BitmapChunk},
     {"write-behind", 2, 0, WriteBehind},
     {"write-mostly",0, 0, WriteMostly},
+    {"failfast",  0, 0,  FailFast},
+    {"nofailfast",0, 0,  NoFailFast},
     {"re-add",    0, 0,  ReAdd},
     {"homehost",  1, 0,  HomeHost},
     {"symlinks",  1, 0,  Symlinks},
diff --git a/md.4 b/md.4
index f1b88ee..5bdf7a7 100644
--- a/md.4
+++ b/md.4
@@ -916,6 +916,60 @@ slow).  The extra latency of the remote link will not slow down normal
 operations, but the remote system will still have a reasonably
 up-to-date copy of all data.
 
+.SS FAILFAST
+
+From Linux 4.10,
+.I
+md
+supports FAILFAST for RAID1 and RAID10 arrays.  This is a flag that
+can be set on individual drives, though it is usually set on all
+drives, or no drives.
+
+When
+.I md
+sends an I/O request to a drive that is marked as FAILFAST, and when
+the array could survive the loss of that drive without losing data,
+.I md
+will request that the underlying device does not perform any retries.
+This means that a failure will be reported to
+.I md
+promptly, and it can mark the device as faulty and continue using the
+other device(s).
+.I md
+cannot control the timeout that the underlying devices use to
+determine failure.  Any changes desired to that timeout must be set
+explictly on the underlying device, separately from using
+.IR mdadm .
+
+If a FAILFAST request does fail, and if it is still safe to mark the
+device as faulty without data loss, that will be done and the array
+will continue functioning on a reduced number of devices.  If it is not
+possible to safely mark the device as faulty,
+.I md
+will retry the request without disabling retries in the underlying
+device.  In any case,
+.I md
+will not attempt to repair read errors on a device marked as FAILFAST
+by writing out the correct.  It will just mark the device as faulty.
+
+FAILFAST is appropriate for storage arrays that have a low probability
+of true failure, but will sometimes introduce unacceptable delays to
+I/O requests while performing internal maintenance.  The value of
+setting FAILFAST involves a trade-off.  The gain is that the chance of
+unacceptable delays is substantially reduced.  The cost is that the
+unlikely event of data-loss on one device is slightly more likely to
+result in data-loss for the array.
+
+When a device in an array using FAILFAST is marked as faulty, it will
+usually become usable again in a short while.
+.I mdadm
+makes no attempt to detect that possibility.  Some separate
+mechanism, tuned to the specific details of the expected failure modes,
+needs to be created to monitor devices to see when they return to full
+functionality, and to then re-add them to the array.  In order of
+this "re-add" functionality to be effective, an array using FAILFAST
+should always have a write-intent bitmap.
+
 .SS RESTRIPING
 
 .IR Restriping ,
diff --git a/md_p.h b/md_p.h
index 0d691fb..dc9fec1 100644
--- a/md_p.h
+++ b/md_p.h
@@ -89,6 +89,7 @@
 				   * read requests will only be sent here in
 				   * dire need
 				   */
+#define	MD_DISK_FAILFAST	10 /* Fewer retries, more failures */
 
 #define MD_DISK_REPLACEMENT	17
 #define MD_DISK_JOURNAL		18 /* disk is used as the write journal in RAID-5/6 */
diff --git a/mdadm.8.in b/mdadm.8.in
index 3c0c58f..aa80f0c 100644
--- a/mdadm.8.in
+++ b/mdadm.8.in
@@ -747,7 +747,7 @@ subsequent devices listed in a
 .BR \-\-create ,
 or
 .B \-\-add
-command will be flagged as 'write-mostly'.  This is valid for RAID1
+command will be flagged as 'write\-mostly'.  This is valid for RAID1
 only and means that the 'md' driver will avoid reading from these
 devices if at all possible.  This can be useful if mirroring over a
 slow link.
@@ -762,6 +762,25 @@ mode, and write-behind is only attempted on drives marked as
 .IR write-mostly .
 
 .TP
+.BR \-\-failfast
+subsequent devices listed in a
+.B \-\-create
+or
+.B \-\-add
+command will be flagged as  'failfast'.  This is valid for RAID1 and
+RAID10 only.  IO requests to these devices will be encouraged to fail
+quickly rather than cause long delays due to error handling.  Also no
+attempt is made to repair a read error on these devices.
+
+If an array becomes degraded so that the 'failfast' device is the only
+usable device, the 'failfast' flag will then be ignored and extended
+delays will be preferred to complete failure.
+
+The 'failfast' flag is appropriate for storage arrays which have a
+low probability of true failure, but which may sometimes
+cause unacceptable delays due to internal maintenance functions.
+
+.TP
 .BR \-\-assume\-clean
 Tell
 .I mdadm
@@ -1452,6 +1471,17 @@ that had a failed journal. To avoid interrupting on-going write opertions,
 .B \-\-add-journal
 only works for array in Read-Only state.
 
+.TP
+.BR \-\-failfast
+Subsequent devices that are added or re\-added will have
+the 'failfast' flag set.  This is only valid for RAID1 and RAID10 and
+means that the 'md' driver will avoid long timeouts on error handling
+where possible.
+.TP
+.BR \-\-nofailfast
+Subsequent devices that are re\-added will be re\-added without
+the 'failfast' flag set.
+
 .P
 Each of these options requires that the first device listed is the array
 to be acted upon, and the remainder are component devices to be added,
diff --git a/mdadm.c b/mdadm.c
index cca0933..3c8f273 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -90,6 +90,7 @@ int main(int argc, char *argv[])
 	int spare_sharing = 1;
 	struct supertype *ss = NULL;
 	int writemostly = 0;
+	int failfast = 0;
 	char *shortopt = short_options;
 	int dosyslog = 0;
 	int rebuild_map = 0;
@@ -295,6 +296,7 @@ int main(int argc, char *argv[])
 					dv->devname = optarg;
 					dv->disposition = devmode;
 					dv->writemostly = writemostly;
+					dv->failfast = failfast;
 					dv->used = 0;
 					dv->next = NULL;
 					*devlistend = dv;
@@ -351,6 +353,7 @@ int main(int argc, char *argv[])
 			dv->devname = optarg;
 			dv->disposition = devmode;
 			dv->writemostly = writemostly;
+			dv->failfast = failfast;
 			dv->used = 0;
 			dv->next = NULL;
 			*devlistend = dv;
@@ -417,6 +420,14 @@ int main(int argc, char *argv[])
 			writemostly = 2;
 			continue;
 
+		case O(MANAGE,FailFast):
+		case O(CREATE,FailFast):
+			failfast = 1;
+			continue;
+		case O(MANAGE,NoFailFast):
+			failfast = 2;
+			continue;
+
 		case O(GROW,'z'):
 		case O(CREATE,'z'):
 		case O(BUILD,'z'): /* size */
diff --git a/mdadm.h b/mdadm.h
index 240ab7f..d47de01 100755..100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -383,6 +383,8 @@ enum special_options {
 	ConfigFile,
 	ChunkSize,
 	WriteMostly,
+	FailFast,
+	NoFailFast,
 	Layout,
 	Auto,
 	Force,
@@ -516,6 +518,7 @@ struct mddev_dev {
 				 * Not set for names read from .config
 				 */
 	char writemostly;	/* 1 for 'set writemostly', 2 for 'clear writemostly' */
+	char failfast;		/* Ditto but for 'failfast' flag */
 	int used;		/* set when used */
 	long long data_offset;
 	struct mddev_dev *next;
@@ -821,6 +824,8 @@ extern struct superswitch {
 	 *   linear-grow-update - now change the size of the array.
 	 *   writemostly - set the WriteMostly1 bit in the superblock devflags
 	 *   readwrite - clear the WriteMostly1 bit in the superblock devflags
+	 *   failfast - set the FailFast1 bit in the superblock
+	 *   nofailfast - clear the FailFast1 bit
 	 *   no-bitmap - clear any record that a bitmap is present.
 	 *   bbl       - add a bad-block-log if possible
 	 *   no-bbl    - remove any bad-block-log is it is empty.
diff --git a/super0.c b/super0.c
index 55ebd8b..938cfd9 100644
--- a/super0.c
+++ b/super0.c
@@ -232,14 +232,15 @@ static void examine_super0(struct supertype *st, char *homehost)
 		mdp_disk_t *dp;
 		char *dv;
 		char nb[5];
-		int wonly;
+		int wonly, failfast;
 		if (d>=0) dp = &sb->disks[d];
 		else dp = &sb->this_disk;
 		snprintf(nb, sizeof(nb), "%4d", d);
 		printf("%4s %5d   %5d    %5d    %5d     ", d < 0 ? "this" : nb,
 		       dp->number, dp->major, dp->minor, dp->raid_disk);
 		wonly = dp->state & (1 << MD_DISK_WRITEMOSTLY);
-		dp->state &= ~(1 << MD_DISK_WRITEMOSTLY);
+		failfast = dp->state & (1<<MD_DISK_FAILFAST);
+		dp->state &= ~(wonly | failfast);
 		if (dp->state & (1 << MD_DISK_FAULTY))
 			printf(" faulty");
 		if (dp->state & (1 << MD_DISK_ACTIVE))
@@ -250,6 +251,8 @@ static void examine_super0(struct supertype *st, char *homehost)
 			printf(" removed");
 		if (wonly)
 			printf(" write-mostly");
+		if (failfast)
+			printf(" failfast");
 		if (dp->state == 0)
 			printf(" spare");
 		if ((dv = map_dev(dp->major, dp->minor, 0)))
@@ -581,7 +584,8 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
 	} else if (strcmp(update, "assemble")==0) {
 		int d = info->disk.number;
 		int wonly = sb->disks[d].state & (1<<MD_DISK_WRITEMOSTLY);
-		int mask = (1<<MD_DISK_WRITEMOSTLY);
+		int failfast = sb->disks[d].state & (1<<MD_DISK_FAILFAST);
+		int mask = (1<<MD_DISK_WRITEMOSTLY)|(1<<MD_DISK_FAILFAST);
 		int add = 0;
 		if (sb->minor_version >= 91)
 			/* During reshape we don't insist on everything
@@ -590,7 +594,7 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
 			add = (1<<MD_DISK_SYNC);
 		if (((sb->disks[d].state & ~mask) | add)
 		    != (unsigned)info->disk.state) {
-			sb->disks[d].state = info->disk.state | wonly;
+			sb->disks[d].state = info->disk.state | wonly |failfast;
 			rv = 1;
 		}
 		if (info->reshape_active &&
diff --git a/super1.c b/super1.c
index d323439..87a74cb 100644
--- a/super1.c
+++ b/super1.c
@@ -77,6 +77,7 @@ struct mdp_superblock_1 {
 	__u8	device_uuid[16]; /* user-space setable, ignored by kernel */
 	__u8    devflags;        /* per-device flags.  Only one defined...*/
 #define WriteMostly1    1        /* mask for writemostly flag in above */
+#define FailFast1	2        /* Device should get FailFast requests */
 	/* bad block log.  If there are any bad blocks the feature flag is set.
 	 * if offset and size are non-zero, that space is reserved and available.
 	 */
@@ -430,6 +431,8 @@ static void examine_super1(struct supertype *st, char *homehost)
 		printf("          Flags :");
 		if (sb->devflags & WriteMostly1)
 			printf(" write-mostly");
+		if (sb->devflags & FailFast1)
+			printf(" failfast");
 		printf("\n");
 	}
 
@@ -1020,6 +1023,8 @@ static void getinfo_super1(struct supertype *st, struct mdinfo *info, char *map)
 	}
 	if (sb->devflags & WriteMostly1)
 		info->disk.state |= (1 << MD_DISK_WRITEMOSTLY);
+	if (sb->devflags & FailFast1)
+		info->disk.state |= (1 << MD_DISK_FAILFAST);
 	info->events = __le64_to_cpu(sb->events);
 	sprintf(info->text_version, "1.%d", st->minor_version);
 	info->safe_mode_delay = 200;
@@ -1377,6 +1382,10 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
 		sb->devflags |= WriteMostly1;
 	else if (strcmp(update, "readwrite")==0)
 		sb->devflags &= ~WriteMostly1;
+	else if (strcmp(update, "failfast") == 0)
+		sb->devflags |= FailFast1;
+	else if (strcmp(update, "nofailfast") == 0)
+		sb->devflags &= ~FailFast1;
 	else
 		rv = -1;
 
@@ -1713,6 +1722,10 @@ static int write_init_super1(struct supertype *st)
 			sb->devflags |= WriteMostly1;
 		else
 			sb->devflags &= ~WriteMostly1;
+		if (di->disk.state & (1<<MD_DISK_FAILFAST))
+			sb->devflags |= FailFast1;
+		else
+			sb->devflags &= ~FailFast1;
 
 		random_uuid(sb->device_uuid);