diff options
Diffstat (limited to 'src/third_party/pcre-8.36/config.h.generic')
| -rw-r--r-- | src/third_party/pcre-8.36/config.h.generic | 350 |
1 files changed, 350 insertions, 0 deletions
diff --git a/src/third_party/pcre-8.36/config.h.generic b/src/third_party/pcre-8.36/config.h.generic new file mode 100644 index 00000000000..6492116efce --- /dev/null +++ b/src/third_party/pcre-8.36/config.h.generic @@ -0,0 +1,350 @@ +/* config.h. Generated from config.h.in by configure. */ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* PCRE is written in Standard C, but there are a few non-standard things it +can cope with, allowing it to run on SunOS4 and other "close to standard" +systems. + +In environments that support the GNU autotools, config.h.in is converted into +config.h by the "configure" script. In environments that use CMake, +config-cmake.in is converted into config.h. If you are going to build PCRE "by +hand" without using "configure" or CMake, you should copy the distributed +config.h.generic to config.h, and edit the macro definitions to be the way you +need them. You must then add -DHAVE_CONFIG_H to all of your compile commands, +so that config.h is included at the start of every source. + +Alternatively, you can avoid editing by using -D on the compiler command line +to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H, +but if you do, default values will be taken from config.h for non-boolean +macros that are not defined on the command line. + +Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE8 should either be defined +(conventionally to 1) for TRUE, and not defined at all for FALSE. All such +macros are listed as a commented #undef in config.h.generic. Macros such as +MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are +surrounded by #ifndef/#endif lines so that the value can be overridden by -D. + +PCRE uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if +HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make +sure both macros are undefined; an emulation function will then be used. */ + +/* By default, the \R escape sequence matches any Unicode line ending + character or sequence of characters. If BSR_ANYCRLF is defined (to any + value), this is changed so that backslash-R matches only CR, LF, or CRLF. + The build-time default can be overridden by the user of PCRE at runtime. */ +/* #undef BSR_ANYCRLF */ + +/* If you are compiling for a system that uses EBCDIC instead of ASCII + character codes, define this macro to any value. You must also edit the + NEWLINE macro below to set a suitable EBCDIC newline, commonly 21 (0x15). + On systems that can use "configure" or CMake to set EBCDIC, NEWLINE is + automatically adjusted. When EBCDIC is set, PCRE assumes that all input + strings are in EBCDIC. If you do not define this macro, PCRE will assume + input strings are ASCII or UTF-8/16/32 Unicode. It is not possible to build + a version of PCRE that supports both EBCDIC and UTF-8/16/32. */ +/* #undef EBCDIC */ + +/* In an EBCDIC environment, define this macro to any value to arrange for the + NL character to be 0x25 instead of the default 0x15. NL plays the role that + LF does in an ASCII/Unicode environment. The value must also be set in the + NEWLINE macro below. On systems that can use "configure" or CMake to set + EBCDIC_NL25, the adjustment of NEWLINE is automatic. */ +/* #undef EBCDIC_NL25 */ + +/* Define to 1 if you have the `bcopy' function. */ +/* #undef HAVE_BCOPY */ + +/* Define to 1 if you have the <bits/type_traits.h> header file. */ +/* #undef HAVE_BITS_TYPE_TRAITS_H */ + +/* Define to 1 if you have the <bzlib.h> header file. */ +/* #undef HAVE_BZLIB_H */ + +/* Define to 1 if you have the <dirent.h> header file. */ +/* #undef HAVE_DIRENT_H */ + +/* Define to 1 if you have the <dlfcn.h> header file. */ +/* #undef HAVE_DLFCN_H */ + +/* Define to 1 if you have the <editline/readline.h> header file. */ +/* #undef HAVE_EDITLINE_READLINE_H */ + +/* Define to 1 if you have the <edit/readline/readline.h> header file. */ +/* #undef HAVE_EDIT_READLINE_READLINE_H */ + +/* Define to 1 if you have the <inttypes.h> header file. */ +/* #undef HAVE_INTTYPES_H */ + +/* Define to 1 if you have the <limits.h> header file. */ +/* #undef HAVE_LIMITS_H */ + +/* Define to 1 if the system has the type `long long'. */ +/* #undef HAVE_LONG_LONG */ + +/* Define to 1 if you have the `memmove' function. */ +/* #undef HAVE_MEMMOVE */ + +/* Define to 1 if you have the <memory.h> header file. */ +/* #undef HAVE_MEMORY_H */ + +/* Define if you have POSIX threads libraries and header files. */ +/* #undef HAVE_PTHREAD */ + +/* Have PTHREAD_PRIO_INHERIT. */ +/* #undef HAVE_PTHREAD_PRIO_INHERIT */ + +/* Define to 1 if you have the <readline/history.h> header file. */ +/* #undef HAVE_READLINE_HISTORY_H */ + +/* Define to 1 if you have the <readline/readline.h> header file. */ +/* #undef HAVE_READLINE_READLINE_H */ + +/* Define to 1 if you have the <stdint.h> header file. */ +/* #undef HAVE_STDINT_H */ + +/* Define to 1 if you have the <stdlib.h> header file. */ +/* #undef HAVE_STDLIB_H */ + +/* Define to 1 if you have the `strerror' function. */ +/* #undef HAVE_STRERROR */ + +/* Define to 1 if you have the <string> header file. */ +/* #undef HAVE_STRING */ + +/* Define to 1 if you have the <strings.h> header file. */ +/* #undef HAVE_STRINGS_H */ + +/* Define to 1 if you have the <string.h> header file. */ +/* #undef HAVE_STRING_H */ + +/* Define to 1 if you have `strtoimax'. */ +/* #undef HAVE_STRTOIMAX */ + +/* Define to 1 if you have `strtoll'. */ +/* #undef HAVE_STRTOLL */ + +/* Define to 1 if you have `strtoq'. */ +/* #undef HAVE_STRTOQ */ + +/* Define to 1 if you have the <sys/stat.h> header file. */ +/* #undef HAVE_SYS_STAT_H */ + +/* Define to 1 if you have the <sys/types.h> header file. */ +/* #undef HAVE_SYS_TYPES_H */ + +/* Define to 1 if you have the <type_traits.h> header file. */ +/* #undef HAVE_TYPE_TRAITS_H */ + +/* Define to 1 if you have the <unistd.h> header file. */ +/* #undef HAVE_UNISTD_H */ + +/* Define to 1 if the system has the type `unsigned long long'. */ +/* #undef HAVE_UNSIGNED_LONG_LONG */ + +/* Define to 1 if the compiler supports simple visibility declarations. */ +/* #undef HAVE_VISIBILITY */ + +/* Define to 1 if you have the <windows.h> header file. */ +/* #undef HAVE_WINDOWS_H */ + +/* Define to 1 if you have the <zlib.h> header file. */ +/* #undef HAVE_ZLIB_H */ + +/* Define to 1 if you have `_strtoi64'. */ +/* #undef HAVE__STRTOI64 */ + +/* The value of LINK_SIZE determines the number of bytes used to store links + as offsets within the compiled regex. The default is 2, which allows for + compiled patterns up to 64K long. This covers the vast majority of cases. + However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows + for longer patterns in extreme cases. */ +#ifndef LINK_SIZE +#define LINK_SIZE 2 +#endif + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +/* This is ignored unless you are using libtool. */ +#ifndef LT_OBJDIR +#define LT_OBJDIR ".libs/" +#endif + +/* The value of MATCH_LIMIT determines the default number of times the + internal match() function can be called during a single execution of + pcre_exec(). There is a runtime interface for setting a different limit. + The limit exists in order to catch runaway regular expressions that take + for ever to determine that they do not match. The default is set very large + so that it does not accidentally catch legitimate cases. */ +#ifndef MATCH_LIMIT +#define MATCH_LIMIT 10000000 +#endif + +/* The above limit applies to all calls of match(), whether or not they + increase the recursion depth. In some environments it is desirable to limit + the depth of recursive calls of match() more strictly, in order to restrict + the maximum amount of stack (or heap, if NO_RECURSE is defined) that is + used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of + match(). To have any useful effect, it must be less than the value of + MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is + a runtime method for setting a different limit. */ +#ifndef MATCH_LIMIT_RECURSION +#define MATCH_LIMIT_RECURSION MATCH_LIMIT +#endif + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#ifndef MAX_NAME_COUNT +#define MAX_NAME_COUNT 10000 +#endif + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#ifndef MAX_NAME_SIZE +#define MAX_NAME_SIZE 32 +#endif + +/* The value of NEWLINE determines the default newline character sequence. + PCRE client programs can override this by selecting other values at run + time. In ASCII environments, the value can be 10 (LF), 13 (CR), or 3338 + (CRLF); in EBCDIC environments the value can be 21 or 37 (LF), 13 (CR), or + 3349 or 3365 (CRLF) because there are two alternative codepoints (0x15 and + 0x25) that are used as the NL line terminator that is equivalent to ASCII + LF. In both ASCII and EBCDIC environments the value can also be -1 (ANY), + or -2 (ANYCRLF). */ +#ifndef NEWLINE +#define NEWLINE 10 +#endif + +/* PCRE uses recursive function calls to handle backtracking while matching. + This can sometimes be a problem on systems that have stacks of limited + size. Define NO_RECURSE to any value to get a version that doesn't use + recursion in the match() function; instead it creates its own stack by + steam using pcre_recurse_malloc() to obtain memory from the heap. For more + detail, see the comments and other stuff just above the match() function. + */ +/* #undef NO_RECURSE */ + +/* Name of package */ +#define PACKAGE "pcre" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "PCRE" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "PCRE 8.36" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "pcre" + +/* Define to the home page for this package. */ +#define PACKAGE_URL "" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "8.36" + +/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested + parentheses (of any kind) in a pattern. This limits the amount of system + stack that is used while compiling a pattern. */ +#ifndef PARENS_NEST_LIMIT +#define PARENS_NEST_LIMIT 250 +#endif + +/* The value of PCREGREP_BUFSIZE determines the size of buffer used by + pcregrep to hold parts of the file it is searching. This is also the + minimum value. The actual amount of memory used by pcregrep is three times + this number, because it allows for the buffering of "before" and "after" + lines. */ +#ifndef PCREGREP_BUFSIZE +#define PCREGREP_BUFSIZE 20480 +#endif + +/* If you are compiling for a system other than a Unix-like system or + Win32, and it needs some magic to be inserted before the definition + of a function that is exported by the library, define this macro to + contain the relevant magic. If you do not define this macro, a suitable + __declspec value is used for Windows systems; in other environments + "extern" is used for a C compiler and "extern C" for a C++ compiler. + This macro apears at the start of every exported function that is part + of the external API. It does not appear on functions that are "external" + in the C sense, but which are internal to the library. */ +/* #undef PCRE_EXP_DEFN */ + +/* Define to any value if linking statically (TODO: make nice with Libtool) */ +/* #undef PCRE_STATIC */ + +/* When calling PCRE via the POSIX interface, additional working storage is + required for holding the pointers to capturing substrings because PCRE + requires three integers per substring, whereas the POSIX interface provides + only two. If the number of expected substrings is small, the wrapper + function uses space on the stack, because this is faster than using + malloc() for each call. The threshold above which the stack is no longer + used is defined by POSIX_MALLOC_THRESHOLD. */ +#ifndef POSIX_MALLOC_THRESHOLD +#define POSIX_MALLOC_THRESHOLD 10 +#endif + +/* Define to necessary symbol if this constant uses a non-standard name on + your system. */ +/* #undef PTHREAD_CREATE_JOINABLE */ + +/* Define to 1 if you have the ANSI C header files. */ +/* #undef STDC_HEADERS */ + +/* Define to any value to enable support for Just-In-Time compiling. */ +/* #undef SUPPORT_JIT */ + +/* Define to any value to allow pcregrep to be linked with libbz2, so that it + is able to handle .bz2 files. */ +/* #undef SUPPORT_LIBBZ2 */ + +/* Define to any value to allow pcretest to be linked with libedit. */ +/* #undef SUPPORT_LIBEDIT */ + +/* Define to any value to allow pcretest to be linked with libreadline. */ +/* #undef SUPPORT_LIBREADLINE */ + +/* Define to any value to allow pcregrep to be linked with libz, so that it is + able to handle .gz files. */ +/* #undef SUPPORT_LIBZ */ + +/* Define to any value to enable the 16 bit PCRE library. */ +/* #undef SUPPORT_PCRE16 */ + +/* Define to any value to enable the 32 bit PCRE library. */ +/* #undef SUPPORT_PCRE32 */ + +/* Define to any value to enable the 8 bit PCRE library. */ +/* #undef SUPPORT_PCRE8 */ + +/* Define to any value to enable JIT support in pcregrep. */ +/* #undef SUPPORT_PCREGREP_JIT */ + +/* Define to any value to enable support for Unicode properties. */ +/* #undef SUPPORT_UCP */ + +/* Define to any value to enable support for the UTF-8/16/32 Unicode encoding. + This will work even in an EBCDIC environment, but it is incompatible with + the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or* + ASCII/UTF-8/16/32, but not both at once. */ +/* #undef SUPPORT_UTF */ + +/* Define to any value for valgrind support to find invalid memory reads. */ +/* #undef SUPPORT_VALGRIND */ + +/* Version number of package */ +#define VERSION "8.36" + +/* Define to empty if `const' does not conform to ANSI C. */ +/* #undef const */ + +/* Define to the type of a signed integer type of width exactly 64 bits if + such a type exists and the standard includes do not define it. */ +/* #undef int64_t */ + +/* Define to `unsigned int' if <sys/types.h> does not define. */ +/* #undef size_t */ |