/**
 * Tests that using an aggregation cursor when the underlying PlanExecutor has been killed results
 * in an error. Also tests that if the pipeline has already read all results from a collection
 * before the collection is dropped, the aggregation should succeed.
 *
 * This test issues getMores on aggregation cursors and expects the getMore to cause the aggregation
 * to request more documents from the collection. If the pipeline is wrapped in a $facet stage, all
 * results will be computed in the initial request and buffered in the results array, preventing the
 * pipeline from requesting more documents.
 * @tags: [
 *   do_not_wrap_aggregations_in_facets,
 *   requires_capped,
 * ]
 */
(function() {
'use strict';

load("jstests/libs/curop_helpers.js");  // For waitForCurOpByFailPoint().

// This test runs a getMore in a parallel shell, which will not inherit the implicit session of
// the cursor establishing command.
TestData.disableImplicitSessions = true;

// The DocumentSourceCursor which wraps PlanExecutors will batch results internally. We use the
// 'internalDocumentSourceCursorBatchSizeBytes' parameter to disable this behavior so that we
// can easily pause a pipeline in a state where it will need to request more results from the
// PlanExecutor.
const options = {
    setParameter: 'internalDocumentSourceCursorBatchSizeBytes=1'
};
const conn = MongoRunner.runMongod(options);
assert.neq(null, conn, 'mongod was unable to start up with options: ' + tojson(options));

const testDB = conn.getDB('test');

// Make sure the number of results is greater than the batchSize to ensure the results
// cannot all fit in one batch.
const batchSize = 2;
const numMatches = batchSize + 1;
const sourceCollection = testDB.source;
const foreignCollection = testDB.foreign;

/**
 * Populates both 'sourceCollection' and 'foreignCollection' with values of 'local' and
 * 'foreign' in the range [0, 'numMatches').
 */
function setup() {
    sourceCollection.drop();
    foreignCollection.drop();
    for (let i = 0; i < numMatches; ++i) {
        assert.commandWorked(sourceCollection.insert({_id: i, local: i}));

        // We want to be able to pause a $lookup stage in a state where it has returned some but
        // not all of the results for a single lookup, so we need to insert at least
        // 'numMatches' matches for each source document.
        for (let j = 0; j < numMatches; ++j) {
            assert.commandWorked(foreignCollection.insert({_id: numMatches * i + j, foreign: i}));
        }
    }
}

// Check that there are no cursors still open on the source collection. If any are found, the
// test will fail and print a list of idle cursors. This should be called each time we
// expect a cursor to have been destroyed.
function assertNoOpenCursorsOnSourceCollection() {
    const cursors = testDB.getSiblingDB("admin")
                        .aggregate([
                            {"$currentOp": {"idleCursors": true}},
                            {
                                "$match": {ns: sourceCollection.getFullName(), "type": "idleCursor"}

                            }
                        ])
                        .toArray();
    assert.eq(
        cursors.length, 0, "Did not expect to find any cursors, but found " + tojson(cursors));
}

const defaultAggregateCmdSmallBatch = {
    aggregate: sourceCollection.getName(),
    pipeline: [],
    cursor: {
        batchSize: batchSize,
    },
};

// Test that dropping the source collection between an aggregate and a getMore will cause an
// aggregation pipeline to fail during the getMore if it needs to fetch more results from the
// collection.
setup();
let res = assert.commandWorked(testDB.runCommand(defaultAggregateCmdSmallBatch));

sourceCollection.drop();

let getMoreCollName = res.cursor.ns.substr(res.cursor.ns.indexOf('.') + 1);
assert.commandFailedWithCode(
    testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName}),
    [ErrorCodes.QueryPlanKilled, ErrorCodes.NamespaceNotFound],
    'expected getMore to fail because the source collection was dropped');

// Make sure the cursors were cleaned up.
assertNoOpenCursorsOnSourceCollection();

// Test that dropping the source collection between an aggregate and a getMore will *not* cause
// an aggregation pipeline to fail during the getMore if it *does not need* to fetch more
// results from the collection.
//
// The test expects that the $sort will execute in the agg layer, and will not be pushed down into
// the PlanStage layer. We add an $_internalInhibitOptimization stage to enforce this.
setup();
res = assert.commandWorked(testDB.runCommand({
    aggregate: sourceCollection.getName(),
    pipeline: [{$_internalInhibitOptimization: {}}, {$sort: {x: 1}}],
    cursor: {
        batchSize: batchSize,
    },
}));

sourceCollection.drop();

getMoreCollName = res.cursor.ns.substr(res.cursor.ns.indexOf('.') + 1);
assert.commandWorked(testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName}));

// Test that dropping a $lookup stage's foreign collection between an aggregate and a getMore
// will *not* cause an aggregation pipeline to fail during the getMore if it needs to fetch more
// results from the foreign collection. It will instead return no matches for subsequent
// lookups, as if the foreign collection was empty.
setup();
res = assert.commandWorked(testDB.runCommand({
        aggregate: sourceCollection.getName(),
        pipeline: [
            {
              $lookup: {
                  from: foreignCollection.getName(),
                  localField: 'local',
                  foreignField: 'foreign',
                  as: 'results',
              }
            },
        ],
        cursor: {
            batchSize: batchSize,
        },
    }));

foreignCollection.drop();
getMoreCollName = res.cursor.ns.substr(res.cursor.ns.indexOf('.') + 1);
res = testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName});
assert.commandFailedWithCode(
    res,
    [ErrorCodes.QueryPlanKilled, ErrorCodes.NamespaceNotFound],
    'expected getMore to fail when the foreign collection has been dropped');

// Make sure the cursors were cleaned up.
assertNoOpenCursorsOnSourceCollection();

// Test that a $lookup stage will properly clean up its cursor if it becomes invalidated between
// batches of a single lookup. This is the same scenario as above, but with the $lookup stage
// left in a state where it has returned some but not all of the matches for a single lookup.
setup();
res = assert.commandWorked(testDB.runCommand({
        aggregate: sourceCollection.getName(),
        pipeline: [
            {
              $lookup: {
                  from: foreignCollection.getName(),
                  localField: 'local',
                  foreignField: 'foreign',
                  as: 'results',
              }
            },
            // Use an $unwind stage to allow the $lookup stage to return some but not all of the
            // results for a single lookup.
            {$unwind: '$results'},
        ],
        cursor: {
            batchSize: batchSize,
        },
    }));

foreignCollection.drop();
getMoreCollName = res.cursor.ns.substr(res.cursor.ns.indexOf('.') + 1);
assert.commandFailedWithCode(
    testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName}),
    [ErrorCodes.QueryPlanKilled, ErrorCodes.NamespaceNotFound],
    'expected getMore to fail because the foreign collection was dropped');

// Make sure the cursors were cleaned up.
assertNoOpenCursorsOnSourceCollection();

// Test that dropping a $graphLookup stage's foreign collection between an aggregate and a
// getMore will *not* cause an aggregation pipeline to fail during the getMore if it needs to
// fetch more results from the foreign collection. It will instead return no matches for
// subsequent lookups, as if the foreign collection was empty.
setup();
res = assert.commandWorked(testDB.runCommand({
        aggregate: sourceCollection.getName(),
        pipeline: [
            {
              $graphLookup: {
                  from: foreignCollection.getName(),
                  startWith: '$local',
                  connectFromField: '_id',
                  connectToField: 'foreign',
                  as: 'results',
              }
            },
        ],
        cursor: {
            batchSize: batchSize,
        },
    }));

foreignCollection.drop();
getMoreCollName = res.cursor.ns.substr(res.cursor.ns.indexOf('.') + 1);
res = testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName});
assert.commandFailedWithCode(
    res,
    ErrorCodes.NamespaceNotFound,
    'expected getMore to fail when the foreign collection has been dropped');
// Make sure the cursors were cleaned up.
assertNoOpenCursorsOnSourceCollection();

// Test that the getMore still succeeds if the $graphLookup is followed by an $unwind on the
// 'as' field and the collection is dropped between the initial request and a getMore.
setup();
res = assert.commandWorked(testDB.runCommand({
        aggregate: sourceCollection.getName(),
        pipeline: [
            {
              $graphLookup: {
                  from: foreignCollection.getName(),
                  startWith: '$local',
                  connectFromField: '_id',
                  connectToField: 'foreign',
                  as: 'results',
              }
            },
            {$unwind: '$results'},
        ],
        cursor: {
            batchSize: batchSize,
        },
    }));

foreignCollection.drop();
getMoreCollName = res.cursor.ns.substr(res.cursor.ns.indexOf('.') + 1);
res = testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName});
assert.commandFailedWithCode(
    res,
    ErrorCodes.NamespaceNotFound,
    'expected getMore to fail when the foreign collection has been dropped');

// Make sure the cursors were cleaned up.
assertNoOpenCursorsOnSourceCollection();

// Test that dropping the database will kill an aggregation's cursor, causing a subsequent
// getMore to fail.
setup();
res = assert.commandWorked(testDB.runCommand(defaultAggregateCmdSmallBatch));

assert.commandWorked(sourceCollection.getDB().dropDatabase());
getMoreCollName = res.cursor.ns.substr(res.cursor.ns.indexOf('.') + 1);

assert.commandFailedWithCode(
    testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName}),
    [ErrorCodes.QueryPlanKilled, ErrorCodes.NamespaceNotFound],
    'expected getMore to fail because the database was dropped');

assertNoOpenCursorsOnSourceCollection();

// Test that killing an aggregation's cursor by inserting enough documents to force a truncation
// of a capped collection will cause a subsequent getMore to fail.
sourceCollection.drop();
foreignCollection.drop();
const maxCappedSizeBytes = 64 * 1024;
const maxNumDocs = 10;
assert.commandWorked(testDB.runCommand(
    {create: sourceCollection.getName(), capped: true, size: maxCappedSizeBytes, max: maxNumDocs}));
// Fill up about half of the collection.
for (let i = 0; i < maxNumDocs / 2; ++i) {
    assert.commandWorked(sourceCollection.insert({_id: i}));
}
// Start an aggregation.
assert.gt(maxNumDocs / 2, batchSize);
res = assert.commandWorked(testDB.runCommand(defaultAggregateCmdSmallBatch));
// Insert enough to force a truncation.
for (let i = maxNumDocs / 2; i < 2 * maxNumDocs; ++i) {
    assert.commandWorked(sourceCollection.insert({_id: i}));
}
assert.eq(maxNumDocs, sourceCollection.count());
assert.commandFailedWithCode(
    testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName}),
    ErrorCodes.CappedPositionLost,
    'expected getMore to fail because the capped collection was truncated');

// Test that killing an aggregation's cursor via the killCursors command will cause a subsequent
// getMore to fail.
setup();
res = assert.commandWorked(testDB.runCommand(defaultAggregateCmdSmallBatch));

const killCursorsNamespace = res.cursor.ns.substr(res.cursor.ns.indexOf('.') + 1);
assert.commandWorked(
    testDB.runCommand({killCursors: killCursorsNamespace, cursors: [res.cursor.id]}));

assertNoOpenCursorsOnSourceCollection();

assert.commandFailedWithCode(
    testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName}),
    ErrorCodes.CursorNotFound,
    'expected getMore to fail because the cursor was killed');

// Test that killing an aggregation's operation via the killOp command will cause a getMore to
// fail.
setup();
res = assert.commandWorked(testDB.runCommand(defaultAggregateCmdSmallBatch));

// Use a failpoint to cause a getMore to hang indefinitely.
assert.commandWorked(testDB.adminCommand(
    {configureFailPoint: 'waitAfterPinningCursorBeforeGetMoreBatch', mode: 'alwaysOn'}));
const curOpFilter = {
    'command.getMore': res.cursor.id
};
assert.eq(0, testDB.currentOp(curOpFilter).inprog.length);

getMoreCollName = res.cursor.ns.substr(res.cursor.ns.indexOf('.') + 1);
const parallelShellCode = 'assert.commandFailedWithCode(db.getSiblingDB(\'' + testDB.getName() +
    '\').runCommand({getMore: ' + res.cursor.id.toString() + ', collection: \'' + getMoreCollName +
    '\'}), ErrorCodes.Interrupted, \'expected getMore command to be interrupted by killOp\');';

// Start a getMore and wait for it to hang.
const awaitParallelShell = startParallelShell(parallelShellCode, conn.port);
assert.soon(function() {
    return assert.commandWorked(testDB.currentOp(curOpFilter)).inprog.length === 1;
}, 'expected getMore operation to remain active');

// Wait until we know the failpoint has been reached.
waitForCurOpByFailPointNoNS(testDB, "waitAfterPinningCursorBeforeGetMoreBatch");

// Kill the operation.
const opId = assert.commandWorked(testDB.currentOp(curOpFilter)).inprog[0].opid;
assert.commandWorked(testDB.killOp(opId));
assert.commandWorked(testDB.adminCommand(
    {configureFailPoint: 'waitAfterPinningCursorBeforeGetMoreBatch', mode: 'off'}));
assert.eq(0, awaitParallelShell());

assertNoOpenCursorsOnSourceCollection();

assert.commandFailedWithCode(
    testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName}),
    ErrorCodes.CursorNotFound,
    'expected getMore to fail because the cursor was killed');

// Test that a cursor timeout of an aggregation's cursor will cause a subsequent getMore to
// fail.
setup();
res = assert.commandWorked(testDB.runCommand(defaultAggregateCmdSmallBatch));

let serverStatus = assert.commandWorked(testDB.serverStatus());
const expectedNumTimedOutCursors = serverStatus.metrics.cursor.timedOut + 1;

// Wait until the idle cursor background job has killed the aggregation cursor.
assert.commandWorked(testDB.adminCommand({setParameter: 1, cursorTimeoutMillis: 10}));
const cursorTimeoutFrequencySeconds = 1;
assert.commandWorked(testDB.adminCommand(
    {setParameter: 1, clientCursorMonitorFrequencySecs: cursorTimeoutFrequencySeconds}));
assert.soon(
    function() {
        serverStatus = assert.commandWorked(testDB.serverStatus());
        return serverStatus.metrics.cursor.timedOut == expectedNumTimedOutCursors;
    },
    function() {
        return 'aggregation cursor failed to time out, expected ' + expectedNumTimedOutCursors +
            ' timed out cursors: ' + tojson(serverStatus.metrics.cursor);
    });

assertNoOpenCursorsOnSourceCollection();
assert.commandFailedWithCode(
    testDB.runCommand({getMore: res.cursor.id, collection: getMoreCollName}),
    ErrorCodes.CursorNotFound,
    'expected getMore to fail because the cursor was killed');

// Test that a cursor will properly be cleaned up on server shutdown.
setup();
res = assert.commandWorked(testDB.runCommand(defaultAggregateCmdSmallBatch));
assert.eq(0, MongoRunner.stopMongod(conn), 'expected mongod to shutdown cleanly');
})();