// Tests the scenario described in SERVER-27534.
// 1. Send a single insert command with a large number of documents and the {ordered: true} option.
// 2. Force the thread processing the insert command to hang in between insert batches. (Inserts are
//    typically split into batches of 64, and the server yields locks between batches.)
// 3. Disconnect the original primary from the network, forcing another node to step up.
// 4. Insert a single document on the new primary.
// 5. Return the original primary to the network and force it to step up by disconnecting the
//    primary that replaced it. The original primary has to roll back any batches from step 1
//    that were inserted locally but did not get majority committed before the insert in step 4.
// 6. Unpause the thread performing the insert from step 1. If it continues to insert batches even
//    though there was a rollback, those inserts will violate the {ordered: true} option.

(function() {
"use strict";

load('jstests/libs/parallelTester.js');
load("jstests/replsets/rslib.js");

var name = "interrupted_batch_insert";
var replTest = new ReplSetTest({name: name, nodes: 3, useBridge: true});
var nodes = replTest.nodeList();

var conns = replTest.startSet();
replTest.initiate({
    _id: name,
    members:
        [{_id: 0, host: nodes[0]}, {_id: 1, host: nodes[1]}, {_id: 2, host: nodes[2], priority: 0}]
});

// The test starts with node 0 as the primary.
replTest.waitForState(replTest.nodes[0], ReplSetTest.State.PRIMARY);
var primary = replTest.nodes[0];
var collName = primary.getDB("db")[name].getFullName();

var getParameterResult =
    primary.getDB("admin").runCommand({getParameter: 1, internalInsertMaxBatchSize: 1});
assert.commandWorked(getParameterResult);
const batchSize = getParameterResult.internalInsertMaxBatchSize;

// Prevent any writes to node 0 (the primary) from replicating to nodes 1 and 2.
stopServerReplication(conns[1]);
stopServerReplication(conns[2]);

// Allow the primary to insert the first 5 batches of documents. After that, the fail point
// activates, and the client thread hangs until the fail point gets turned off.
assert.commandWorked(primary.getDB("db").adminCommand(
    {configureFailPoint: "hangDuringBatchInsert", mode: {skip: 5}}));

// In a background thread, issue an insert command to the primary that will insert 10 batches of
// documents.
var worker = new ScopedThread((host, collName, numToInsert) => {
    // Insert elements [{idx: 0}, {idx: 1}, ..., {idx: numToInsert - 1}].
    const docsToInsert = Array.from({length: numToInsert}, (_, i) => {
        return {idx: i};
    });
    var coll = new Mongo(host).getCollection(collName);
    assert.commandFailedWithCode(
        coll.insert(docsToInsert, {writeConcern: {w: "majority", wtimeout: 5000}, ordered: true}),
        ErrorCodes.InterruptedDueToReplStateChange);
}, primary.host, collName, 10 * batchSize);
worker.start();

// Wait long enough to guarantee that all 5 batches of inserts have executed and the primary is
// hung on the "hangDuringBatchInsert" fail point.
checkLog.contains(primary, "hangDuringBatchInsert fail point enabled");

// Make sure the insert command is, in fact, running in the background.
assert.eq(primary.getDB("db").currentOp({"command.insert": name, active: true}).inprog.length, 1);

// Completely isolate the current primary (node 0), forcing it to step down.
conns[0].disconnect(conns[1]);
conns[0].disconnect(conns[2]);

// Wait for node 1, the only other eligible node, to become the new primary.
replTest.waitForState(replTest.nodes[1], ReplSetTest.State.PRIMARY);
assert.eq(replTest.nodes[1], replTest.getPrimary());

restartServerReplication(conns[2]);

// Issue a write to the new primary.
var collOnNewPrimary = replTest.nodes[1].getCollection(collName);
assert.writeOK(collOnNewPrimary.insert({singleDoc: 1}, {writeConcern: {w: "majority"}}));

// Isolate node 1, forcing it to step down as primary, and reconnect node 0, allowing it to step
// up again.
conns[1].disconnect(conns[2]);
conns[0].reconnect(conns[2]);

// Wait for node 0 to become primary again.
replTest.waitForState(primary, ReplSetTest.State.PRIMARY);
assert.eq(replTest.nodes[0], replTest.getPrimary());

// Allow the batch insert to continue.
assert.commandWorked(
    primary.getDB("db").adminCommand({configureFailPoint: "hangDuringBatchInsert", mode: "off"}));

// Wait until the insert command is done.
assert.soon(
    () =>
        primary.getDB("db").currentOp({"command.insert": name, active: true}).inprog.length === 0);

worker.join();

var docs = primary.getDB("db")[name].find({idx: {$exists: 1}}).sort({idx: 1}).toArray();

// Any discontinuity in the "idx" values is an error. If an "idx" document failed to insert, all
// the of "idx" documents after it should also have failed to insert, because the insert
// specified {ordered: 1}. Note, if none of the inserts were successful, that's fine.
docs.forEach((element, index) => {
    assert.eq(element.idx, index);
});

// Reconnect the remaining disconnected nodes, so we can exit.
conns[0].reconnect(conns[1]);
conns[1].reconnect(conns[2]);
restartServerReplication(conns[1]);

replTest.stopSet(15);
}());