// Tests for the mongos explain command.

// Create a cluster with 3 shards.
var st = new ShardingTest({shards: 2});
st.stopBalancer();

var db = st.s.getDB("test");
var explain;

// Setup a collection that will be sharded. The shard key will be 'a'. There's also an index on 'b'.
var collSharded = db.getCollection("mongos_explain_cmd");
collSharded.drop();
collSharded.ensureIndex({a: 1});
collSharded.ensureIndex({b: 1});

// Enable sharding.
assert.commandWorked(db.adminCommand({enableSharding: db.getName()}));
db.adminCommand({shardCollection: collSharded.getFullName(), key: {a: 1}});

// Pre-split the collection to ensure that both shards have chunks. Explicitly
// move chunks since the balancer is disabled.
for (var i = 1; i <= 2; i++) {
    assert.commandWorked(db.adminCommand({split: collSharded.getFullName(), middle: {a: i}}));

    var shardName = "shard000" + (i-1);
    printjson(db.adminCommand({moveChunk: collSharded.getFullName(),
                               find: {a: i},
                               to: shardName}));
}

// Put data on each shard.
for (var i = 0; i < 3; i++) {
    collSharded.insert({_id: i, a: i, b: 1});
}

printjson(sh.status());

// Test a scatter-gather count command.
assert.eq(3, collSharded.count({b: 1}));

// Explain the scatter-gather count.
explain = db.runCommand({
    explain: {
        count: collSharded.getName(),
        query: {b: 1}
    },
    verbosity: "allPlansExecution"
});

// Validate some basic properties of the result.
printjson(explain);
assert.commandWorked(explain);
assert("queryPlanner" in explain);
assert("executionStats" in explain);
assert.eq(2, explain.queryPlanner.winningPlan.shards.length);
assert.eq(2, explain.executionStats.executionStages.shards.length);

// An explain of a command that doesn't exist should fail gracefully.
explain = db.runCommand({
    explain: {
        nonexistent: collSharded.getName(),
        query: {b: 1}
    },
    verbosity: "allPlansExecution"
});
printjson(explain);
assert.commandFailed(explain);

// -------

// Setup a collection that is not sharded.
var collUnsharded = db.getCollection("mongos_explain_cmd_unsharded");
collUnsharded.drop();
collUnsharded.ensureIndex({a: 1});
collUnsharded.ensureIndex({b: 1});

for (var i = 0; i < 3; i++) {
    collUnsharded.insert({_id: i, a: i, b: 1});
}
assert.eq(3, collUnsharded.count({b: 1}));

explain = db.runCommand({
    explain: {
        group: {
            ns: collUnsharded.getName(),
            key: "a",
            cond: "b",
            $reduce: function (curr, result) { },
            initial: { }
        }
    },
    verbosity: "allPlansExecution"
});

// Basic validation: a group command can only be passed through to an unsharded collection,
// so we should confirm that the mongos stage is always SINGLE_SHARD.
printjson(explain);
assert.commandWorked(explain);
assert("queryPlanner" in explain);
assert("executionStats" in explain);
assert.eq("SINGLE_SHARD", explain.queryPlanner.winningPlan.stage);

// The same group should fail over the sharded collection, because group is only supported
// if it is passed through to an unsharded collection.
explain = db.runCommand({
    explain: {
        group: {
            ns: collSharded.getName(),
            key: "a",
            cond: "b",
            $reduce: function (curr, result) { },
            initial: { }
        }
    },
    verbosity: "allPlansExecution"
});
printjson(explain);
assert.commandFailed(explain);

// -------

// Explain a delete operation and verify that it hits all shards without the shard key
explain = db.runCommand({
    explain: {
        delete: collSharded.getName(),
        deletes: [
            {q: {b: 1}, limit: 0}
        ]
    },
    verbosity: "allPlansExecution"
});
assert.commandWorked(explain, tojson(explain));
assert.eq(explain.queryPlanner.winningPlan.stage, "SHARD_WRITE");
assert.eq(explain.queryPlanner.winningPlan.shards.length, 2);
assert.eq(explain.queryPlanner.winningPlan.shards[0].winningPlan.stage, "DELETE");
assert.eq(explain.queryPlanner.winningPlan.shards[1].winningPlan.stage, "DELETE");
// Check that the deletes didn't actually happen.
assert.eq(3, collSharded.count({b: 1}));

// Explain a delete operation and verify that it hits only one shard with the shard key
explain = db.runCommand({
    explain: {
        delete: collSharded.getName(),
        deletes: [
            {q: {a: 1}, limit: 0}
        ]
    },
    verbosity: "allPlansExecution"
});
assert.commandWorked(explain, tojson(explain));
assert.eq(explain.queryPlanner.winningPlan.shards.length, 1);
// Check that the deletes didn't actually happen.
assert.eq(3, collSharded.count({b: 1}));

// Check that we fail gracefully if we try to do an explain of a write batch that has more
// than one operation in it.
explain = db.runCommand({
    explain: {
        delete: collSharded.getName(),
        deletes: [
            {q: {a: 1}, limit: 1},
            {q: {a: 2}, limit: 1}
        ]
    },
    verbosity: "allPlansExecution"
});
assert.commandFailed(explain, tojson(explain));

// Explain a multi upsert operation and verify that it hits all shards
explain = db.runCommand({
    explain: {
        update: collSharded.getName(),
        updates: [{q: {}, u: {$set: {b: 10}}, multi: true}]
    },
    verbosity: "allPlansExecution"
});
assert.commandWorked(explain, tojson(explain));
assert.eq(explain.queryPlanner.winningPlan.shards.length, 2);
assert.eq(explain.queryPlanner.winningPlan.stage, "SHARD_WRITE");
assert.eq(explain.queryPlanner.winningPlan.shards.length, 2);
assert.eq(explain.queryPlanner.winningPlan.shards[0].winningPlan.stage, "UPDATE");
assert.eq(explain.queryPlanner.winningPlan.shards[1].winningPlan.stage, "UPDATE");
// Check that the update didn't actually happen.
assert.eq(0, collSharded.count({b: 10}));

// Explain an upsert operation and verify that it hits only a single shard
explain = db.runCommand({
    explain: {
        update: collSharded.getName(),
        updates: [{q: {a: 10}, u: {a: 10}, upsert: true}]
    },
    verbosity: "allPlansExecution"
});
assert.commandWorked(explain, tojson(explain));
assert.eq(explain.queryPlanner.winningPlan.shards.length, 1);
// Check that the upsert didn't actually happen.
assert.eq(0, collSharded.count({a: 10}));

// Explain an upsert operation which cannot be targeted, ensure an error is thrown
explain = db.runCommand({
    explain: {
        update: collSharded.getName(),
        updates: [{q: {b: 10}, u: {b: 10}, upsert: true}]
    },
    verbosity: "allPlansExecution"
});
assert.commandFailed(explain, tojson(explain));