# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ AS = @AS@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ COMPONENT_CFLAGS = @COMPONENT_CFLAGS@ COMPONENT_LIBS = @COMPONENT_LIBS@ CORE_CFLAGS = @CORE_CFLAGS@ CORE_IDL_INCLUDES = @CORE_IDL_INCLUDES@ CORE_LIBS = @CORE_LIBS@ CPP = @CPP@ DATADIRNAME = @DATADIRNAME@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ EEL_REQUIRED = @EEL_REQUIRED@ ENABLE_PROFILER = @ENABLE_PROFILER@ EXEEXT = @EXEEXT@ FAM_LIBS = @FAM_LIBS@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GIMPHWRAPBOX_CFLAGS = @GIMPHWRAPBOX_CFLAGS@ GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNOME_ACLOCAL_DIR = @GNOME_ACLOCAL_DIR@ GNOME_ACLOCAL_FLAGS = @GNOME_ACLOCAL_FLAGS@ GNOME_INTERFACE_VERSION = @GNOME_INTERFACE_VERSION@ GNOME_VFS_REQUIRED = @GNOME_VFS_REQUIRED@ GTKDOC = @GTKDOC@ HAVE_GTK_DOC = @HAVE_GTK_DOC@ HAVE_JW = @HAVE_JW@ HAVE_MEDUSA = @HAVE_MEDUSA@ INSTOBJEXT = @INSTOBJEXT@ INTLDEPS = @INTLDEPS@ INTLLIBS = @INTLLIBS@ INTLOBJS = @INTLOBJS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ JW = @JW@ LIBJPEG = @LIBJPEG@ LIBNAUTILUS_CFLAGS = @LIBNAUTILUS_CFLAGS@ LIBNAUTILUS_IDL_INCLUDES = @LIBNAUTILUS_IDL_INCLUDES@ LIBNAUTILUS_LIBS = @LIBNAUTILUS_LIBS@ LIBPNG = @LIBPNG@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MEDUSA_REQUIRED = @MEDUSA_REQUIRED@ MKINSTALLDIRS = @MKINSTALLDIRS@ MUSIC_COMPONENT_CFLAGS = @MUSIC_COMPONENT_CFLAGS@ MUSIC_COMPONENT_LIBS = @MUSIC_COMPONENT_LIBS@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ ORBIT_CFLAGS = @ORBIT_CFLAGS@ ORBIT_CONFIG = @ORBIT_CONFIG@ ORBIT_IDL = @ORBIT_IDL@ ORBIT_LIBS = @ORBIT_LIBS@ PACKAGE = @PACKAGE@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ RANLIB = @RANLIB@ RSVG_REQUIRED = @RSVG_REQUIRED@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XML_REQUIRED = @XML_REQUIRED@ NULL = SUBDIRS = $(NULL) icondir = $(datadir)/pixmaps/nautilus/default icon_DATA = Back.png Forward.png Home.png Refresh.png Search.png Stop.png Up.png SearchWeb.png decrement.png default.xml home.png i-directory-12.png i-directory-24.png i-directory-36.png i-directory-72.png i-directory-96.png i-directory.png i-directory-accept-12.png i-directory-accept-24.png i-directory-accept-36.png i-directory-accept-72.png i-directory-accept-96.png i-directory-accept.png i-directory.xml i-directory-accept.xml i-regular-12.png i-regular-24.png i-regular-36.png i-regular-72.png i-regular-96.png i-regular.png i-regular.xml i-bookmark-20.png i-bookmark-missing-20.png i-bookmark-missing.png i-bookmark.png i-broken-image.png i-search-72.png i-spreadsheet.png i-stalled.png i-symlink.png i-web-72.png increment.png loading.png manual.png number_strip.png side_bar_image.png temp-home.png theme_preview.png trash-empty.png trash-full.png zoom_body.png $(NULL) EXTRA_DIST = $(icon_DATA) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = ../../config.h CONFIG_CLEAN_FILES = DATA = $(icon_DATA) DIST_COMMON = Makefile.am Makefile.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = gtar GZIP_ENV = --best all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/default/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status install-iconDATA: $(icon_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(icondir) @list='$(icon_DATA)'; for p in $$list; do \ if test -f $(srcdir)/$$p; then \ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(icondir)/$$p"; \ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(icondir)/$$p; \ else if test -f $$p; then \ echo " $(INSTALL_DATA) $$p $(DESTDIR)$(icondir)/$$p"; \ $(INSTALL_DATA) $$p $(DESTDIR)$(icondir)/$$p; \ fi; fi; \ done uninstall-iconDATA: @$(NORMAL_UNINSTALL) list='$(icon_DATA)'; for p in $$list; do \ rm -f $(DESTDIR)$(icondir)/$$p; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = icons/default distdir: $(DISTFILES) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(top_distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu icons/default/Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive install-exec-am: install-exec: install-exec-recursive install-data-am: install-iconDATA install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall-iconDATA uninstall: uninstall-recursive all-am: Makefile $(DATA) all-redirect: all-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: $(mkinstalldirs) $(DESTDIR)$(icondir) mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-tags clean-generic mostlyclean-am clean: clean-recursive distclean-am: distclean-tags distclean-generic clean-am -rm -f libtool distclean: distclean-recursive maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive .PHONY: uninstall-iconDATA install-iconDATA install-data-recursive \ uninstall-data-recursive install-exec-recursive \ uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ all-recursive check-recursive installcheck-recursive info-recursive \ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ install-exec install-data-am install-data install-am install \ uninstall-am uninstall all-redirect all-am all installdirs-am \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: