/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is the Netscape Portable Runtime (NSPR). * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998-2000 * the Initial Developer. All Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include "primpl.h" #ifdef AIX_HAVE_ATOMIC_OP_H #include PRInt32 _AIX_AtomicSet(PRInt32 *val, PRInt32 newval) { PRIntn oldval; boolean_t stored; oldval = fetch_and_add((atomic_p)val, 0); do { stored = compare_and_swap((atomic_p)val, &oldval, newval); } while (!stored); return oldval; } /* _AIX_AtomicSet */ #endif /* AIX_HAVE_ATOMIC_OP_H */ #if defined(AIX_TIMERS) #include static PRUint32 _aix_baseline_epoch; static void _MD_AixIntervalInit(void) { timebasestruct_t real_time; read_real_time(&real_time, TIMEBASE_SZ); (void)time_base_to_time(&real_time, TIMEBASE_SZ); _aix_baseline_epoch = real_time.tb_high; } /* _MD_AixIntervalInit */ PRIntervalTime _MD_AixGetInterval(void) { PRIntn rv; PRUint64 temp; timebasestruct_t real_time; read_real_time(&real_time, TIMEBASE_SZ); (void)time_base_to_time(&real_time, TIMEBASE_SZ); /* tb_high is in seconds, tb_low in 10(-9)seconds */ temp = 1000000000ULL * (PRUint64)(real_time.tb_high - _aix_baseline_epoch); temp += (PRUint64)real_time.tb_low; /* everything's 10(-9) seconds */ temp >>= 16; /* now it's something way different */ return (PRIntervalTime)temp; } /* _MD_AixGetInterval */ PRIntervalTime _MD_AixIntervalPerSec(void) { return 1000000000ULL >> 16; /* that's 15258, I think */ } /* _MD_AixIntervalPerSec */ #endif /* defined(AIX_TIMERS) */ #if !defined(PTHREADS_USER) #if defined(_PR_PTHREADS) /* * AIX 4.3 has sched_yield(). AIX 4.2 has pthread_yield(). * So we look up the appropriate function pointer at run time. */ #include int (*_PT_aix_yield_fcn)() = NULL; int _pr_aix_send_file_use_disabled = 0; void _MD_EarlyInit(void) { void *main_app_handle; char *evp; main_app_handle = dlopen(NULL, RTLD_NOW); PR_ASSERT(NULL != main_app_handle); _PT_aix_yield_fcn = (int(*)())dlsym(main_app_handle, "sched_yield"); if (!_PT_aix_yield_fcn) { _PT_aix_yield_fcn = (int(*)())dlsym(main_app_handle,"pthread_yield"); PR_ASSERT(NULL != _PT_aix_yield_fcn); } dlclose(main_app_handle); if (evp = getenv("NSPR_AIX_SEND_FILE_USE_DISABLED")) { if (1 == atoi(evp)) _pr_aix_send_file_use_disabled = 1; } #if defined(AIX_TIMERS) _MD_AixIntervalInit(); #endif } #else /* _PR_PTHREADS */ void _MD_EarlyInit(void) { #if defined(AIX_TIMERS) _MD_AixIntervalInit(); #endif } #endif /* _PR_PTHREADS */ PRWord *_MD_HomeGCRegisters(PRThread *t, int isCurrent, int *np) { #ifndef _PR_PTHREADS if (isCurrent) { (void) setjmp(CONTEXT(t)); } *np = sizeof(CONTEXT(t)) / sizeof(PRWord); return (PRWord *) CONTEXT(t); #else *np = 0; return NULL; #endif } #ifndef _PR_PTHREADS PR_IMPLEMENT(void) _MD_SET_PRIORITY(_MDThread *thread, PRUintn newPri) { return; } PR_IMPLEMENT(PRStatus) _MD_InitializeThread(PRThread *thread) { return PR_SUCCESS; } PR_IMPLEMENT(PRStatus) _MD_WAIT(PRThread *thread, PRIntervalTime ticks) { PR_ASSERT(!(thread->flags & _PR_GLOBAL_SCOPE)); _PR_MD_SWITCH_CONTEXT(thread); return PR_SUCCESS; } PR_IMPLEMENT(PRStatus) _MD_WAKEUP_WAITER(PRThread *thread) { if (thread) { PR_ASSERT(!(thread->flags & _PR_GLOBAL_SCOPE)); } return PR_SUCCESS; } /* These functions should not be called for AIX */ PR_IMPLEMENT(void) _MD_YIELD(void) { PR_NOT_REACHED("_MD_YIELD should not be called for AIX."); } PR_IMPLEMENT(PRStatus) _MD_CREATE_THREAD( PRThread *thread, void (*start) (void *), PRThreadPriority priority, PRThreadScope scope, PRThreadState state, PRUint32 stackSize) { PR_NOT_REACHED("_MD_CREATE_THREAD should not be called for AIX."); } #endif /* _PR_PTHREADS */ #endif /* PTHREADS_USER */ /* * NSPR 2.0 overrides the system select() and poll() functions. * On AIX 4.2, we use dlopen("/unix", RTLD_NOW) and dlsym() to get * at the original system select() and poll() functions. */ #if !defined(AIX_RENAME_SELECT) #include #include #include static int (*aix_select_fcn)() = NULL; static int (*aix_poll_fcn)() = NULL; int _MD_SELECT(int width, fd_set *r, fd_set *w, fd_set *e, struct timeval *t) { int rv; if (!aix_select_fcn) { void *aix_handle; aix_handle = dlopen("/unix", RTLD_NOW); if (!aix_handle) { PR_SetError(PR_UNKNOWN_ERROR, 0); return -1; } aix_select_fcn = (int(*)())dlsym(aix_handle,"select"); dlclose(aix_handle); if (!aix_select_fcn) { PR_SetError(PR_UNKNOWN_ERROR, 0); return -1; } } rv = (*aix_select_fcn)(width, r, w, e, t); return rv; } int _MD_POLL(void *listptr, unsigned long nfds, long timeout) { int rv; if (!aix_poll_fcn) { void *aix_handle; aix_handle = dlopen("/unix", RTLD_NOW); if (!aix_handle) { PR_SetError(PR_UNKNOWN_ERROR, 0); return -1; } aix_poll_fcn = (int(*)())dlsym(aix_handle,"poll"); dlclose(aix_handle); if (!aix_poll_fcn) { PR_SetError(PR_UNKNOWN_ERROR, 0); return -1; } } rv = (*aix_poll_fcn)(listptr, nfds, timeout); return rv; } #else /* * In AIX versions prior to 4.2, we use the two-step rename/link trick. * The binary must contain at least one "poll" symbol for linker's rename * to work. So we must have this dummy function that references poll(). */ #include void _pr_aix_dummy() { poll(0,0,0); } #endif /* !defined(AIX_RENAME_SELECT) */ #ifdef _PR_HAVE_ATOMIC_CAS #include "pratom.h" #define _PR_AIX_ATOMIC_LOCK -1 PR_IMPLEMENT(void) PR_StackPush(PRStack *stack, PRStackElem *stack_elem) { PRStackElem *addr; boolean_t locked = TRUE; /* Is it safe to cast a pointer to an int? */ PR_ASSERT(sizeof(int) == sizeof(PRStackElem *)); do { while ((addr = stack->prstk_head.prstk_elem_next) == (PRStackElem *)_PR_AIX_ATOMIC_LOCK) ; locked = _check_lock((atomic_p) &stack->prstk_head.prstk_elem_next, (int) addr, _PR_AIX_ATOMIC_LOCK); } while (locked == TRUE); stack_elem->prstk_elem_next = addr; _clear_lock((atomic_p)&stack->prstk_head.prstk_elem_next, (int)stack_elem); return; } PR_IMPLEMENT(PRStackElem *) PR_StackPop(PRStack *stack) { PRStackElem *element; boolean_t locked = TRUE; /* Is it safe to cast a pointer to an int? */ PR_ASSERT(sizeof(int) == sizeof(PRStackElem *)); do { while ((element = stack->prstk_head.prstk_elem_next) == (PRStackElem *) _PR_AIX_ATOMIC_LOCK) ; locked = _check_lock((atomic_p) &stack->prstk_head.prstk_elem_next, (int)element, _PR_AIX_ATOMIC_LOCK); } while (locked == TRUE); if (element == NULL) { _clear_lock((atomic_p) &stack->prstk_head.prstk_elem_next, NULL); } else { _clear_lock((atomic_p) &stack->prstk_head.prstk_elem_next, (int) element->prstk_elem_next); } return element; } #endif /* _PR_HAVE_ATOMIC_CAS */