diff options
Diffstat (limited to 'security/coreconf/arch.mk')
| -rw-r--r-- | security/coreconf/arch.mk | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/security/coreconf/arch.mk b/security/coreconf/arch.mk new file mode 100644 index 000000000..691acb856 --- /dev/null +++ b/security/coreconf/arch.mk @@ -0,0 +1,292 @@ +# +# The contents of this file are subject to the Mozilla Public +# License Version 1.1 (the "License"); you may not use this file +# except in compliance with the License. You may obtain a copy of +# the License at http://www.mozilla.org/MPL/ +# +# Software distributed under the License is distributed on an "AS +# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or +# implied. See the License for the specific language governing +# rights and limitations under the License. +# +# The Original Code is the Netscape security libraries. +# +# The Initial Developer of the Original Code is Netscape +# Communications Corporation. Portions created by Netscape are +# Copyright (C) 1994-2000 Netscape Communications Corporation. All +# Rights Reserved. +# +# Contributor(s): +# +# Alternatively, the contents of this file may be used under the +# terms of the GNU General Public License Version 2 or later (the +# "GPL"), in which case the provisions of the GPL are applicable +# instead of those above. If you wish to allow use of your +# version of this file only under the terms of the GPL and not to +# allow others to use your version of this file under the MPL, +# indicate your decision by deleting the provisions above and +# replace them with the notice and other provisions required by +# the GPL. If you do not delete the provisions above, a recipient +# may use your version of this file under either the MPL or the +# GPL. +# + +####################################################################### +# Master "Core Components" macros for getting the OS architecture # +####################################################################### + +# +# Macros for getting the OS architecture +# + +ifeq ($(USE_64), 1) + 64BIT_TAG=_64 +else + 64BIT_TAG= +endif + +OS_ARCH := $(subst /,_,$(shell uname -s)) + +# +# Attempt to differentiate between sparc and x86 Solaris +# + +OS_TEST := $(shell uname -m) +ifeq ($(OS_TEST),i86pc) + OS_RELEASE := $(shell uname -r)_$(OS_TEST) +else + OS_RELEASE := $(shell uname -r) +endif + +# +# Force the IRIX64 machines to use IRIX. +# + +ifeq ($(OS_ARCH),IRIX64) + OS_ARCH = IRIX +endif + +# +# Force the newer BSDI versions to use the old arch name. +# + +ifeq ($(OS_ARCH),BSD_OS) + OS_ARCH = BSD_386 +endif + +# +# Catch Deterim if SVR4 is NCR or UNIXWARE +# + +ifeq ($(OS_ARCH),UNIX_SV) + ifneq ($(findstring NCR, $(shell grep NCR /etc/bcheckrc | head -1 )),) + OS_ARCH = NCR + else + # Make UnixWare something human readable + OS_ARCH = UNIXWARE + endif + + # Get the OS release number, not 4.2 + OS_RELEASE := $(shell uname -v) +endif + +ifeq ($(OS_ARCH),UNIX_System_V) + OS_ARCH = NEC +endif + +ifeq ($(OS_ARCH),AIX) + OS_RELEASE := $(shell uname -v).$(shell uname -r) +endif + +# +# Distinguish between OSF1 V4.0B and V4.0D +# + +ifeq ($(OS_ARCH)$(OS_RELEASE),OSF1V4.0) + OS_VERSION := $(shell uname -v) + ifeq ($(OS_VERSION),564) + OS_RELEASE := V4.0B + endif + ifeq ($(OS_VERSION),878) + OS_RELEASE := V4.0D + endif +endif + +# +# SINIX changes name to ReliantUNIX with 5.43 +# + +ifeq ($(OS_ARCH),ReliantUNIX-N) + OS_ARCH = ReliantUNIX + OS_RELEASE = 5.4 +endif + +ifeq ($(OS_ARCH),SINIX-N) + OS_ARCH = ReliantUNIX + OS_RELEASE = 5.4 +endif + +# +# Handle FreeBSD 2.2-STABLE and Linux 2.0.30-osfmach3 +# + +ifeq (,$(filter-out Linux FreeBSD,$(OS_ARCH))) +OS_RELEASE := $(shell echo $(OS_RELEASE) | sed 's/-.*//') +endif + +ifeq ($(OS_ARCH),Linux) + OS_RELEASE := $(basename $(OS_RELEASE)) +endif + +####################################################################### +# Master "Core Components" macros for getting the OS target # +####################################################################### + +# +# Note: OS_TARGET should be specified on the command line for gmake. +# When OS_TARGET=WIN95 is specified, then a Windows 95 target is built. +# The difference between the Win95 target and the WinNT target is that +# the WinNT target uses Windows NT specific features not available +# in Windows 95. The Win95 target will run on Windows NT, but (supposedly) +# at lesser performance (the Win95 target uses threads; the WinNT target +# uses fibers). +# +# When OS_TARGET=WIN16 is specified, then a Windows 3.11 (16bit) target +# is built. See: win16_3.11.mk for lots more about the Win16 target. +# +# If OS_TARGET is not specified, it defaults to $(OS_ARCH), i.e., no +# cross-compilation. +# + +# +# The following hack allows one to build on a WIN95 machine (as if +# s/he were cross-compiling on a WINNT host for a WIN95 target). +# It also accomodates for MKS's uname.exe. If you never intend +# to do development on a WIN95 machine, you don't need this. It doesn't +# work any more anyway. +# +ifeq ($(OS_ARCH),WIN95) + OS_ARCH = WINNT + OS_TARGET = WIN95 +endif +ifeq ($(OS_ARCH),Windows_95) + OS_ARCH = Windows_NT + OS_TARGET = WIN95 +endif + +# +# On WIN32, we also define the variable CPU_ARCH. +# + +ifeq ($(OS_ARCH), WINNT) + CPU_ARCH := $(shell uname -p) + ifeq ($(CPU_ARCH),I386) + CPU_ARCH = x386 + endif +else +# +# If uname -s returns "Windows_NT", we assume that we are using +# the uname.exe in MKS toolkit. +# +# The -r option of MKS uname only returns the major version number. +# So we need to use its -v option to get the minor version number. +# Moreover, it doesn't have the -p option, so we need to use uname -m. +# +ifeq ($(OS_ARCH), Windows_NT) + OS_ARCH = WINNT + OS_MINOR_RELEASE := $(shell uname -v) + ifeq ($(OS_MINOR_RELEASE),00) + OS_MINOR_RELEASE = 0 + endif + OS_RELEASE = $(OS_RELEASE).$(OS_MINOR_RELEASE) + CPU_ARCH := $(shell uname -m) + # + # MKS's uname -m returns "586" on a Pentium machine. + # + ifneq (,$(findstring 86,$(CPU_ARCH))) + CPU_ARCH = x386 + endif +endif +endif + +ifndef OS_TARGET + OS_TARGET = $(OS_ARCH) +endif + +ifeq ($(OS_TARGET), WIN95) + OS_RELEASE = 4.0 +endif + +ifeq ($(OS_TARGET), WIN16) + OS_RELEASE = +# OS_RELEASE = _3.11 +endif + +# +# This variable is used to get OS_CONFIG.mk. +# + +OS_CONFIG = $(OS_TARGET)$(OS_RELEASE) + +# +# OBJDIR_TAG depends on the predefined variable BUILD_OPT, +# to distinguish between debug and release builds. +# + +ifdef BUILD_OPT + ifeq ($(OS_TARGET),WIN16) + OBJDIR_TAG = _O + else + OBJDIR_TAG = $(64BIT_TAG)_OPT + endif +else + ifdef BUILD_IDG + ifeq ($(OS_TARGET),WIN16) + OBJDIR_TAG = _I + else + OBJDIR_TAG = $(64BIT_TAG)_IDG + endif + else + ifeq ($(OS_TARGET),WIN16) + OBJDIR_TAG = _D + else + OBJDIR_TAG = $(64BIT_TAG)_DBG + endif + endif +endif + +# +# The following flags are defined in the individual $(OS_CONFIG).mk +# files. +# +# CPU_TAG is defined if the CPU is not the most common CPU. +# COMPILER_TAG is defined if the compiler is not the native compiler. +# IMPL_STRATEGY may be defined too. +# + +# Name of the binary code directories +ifeq ($(OS_ARCH), WINNT) + ifeq ($(CPU_ARCH),x386) + OBJDIR_NAME = $(OS_CONFIG)$(OBJDIR_TAG).OBJ + else + OBJDIR_NAME = $(OS_CONFIG)$(CPU_ARCH)$(OBJDIR_TAG).OBJ + endif +else +endif + +OBJDIR_NAME = $(OS_CONFIG)$(CPU_TAG)$(COMPILER_TAG)$(LIBC_TAG)$(IMPL_STRATEGY)$(OBJDIR_TAG).OBJ + +ifeq ($(OS_ARCH), WINNT) +ifneq ($(OS_TARGET),WIN16) +ifndef BUILD_OPT +# +# Define USE_DEBUG_RTL if you want to use the debug runtime library +# (RTL) in the debug build +# +ifdef USE_DEBUG_RTL + OBJDIR_NAME = $(OS_CONFIG)$(CPU_TAG)$(COMPILER_TAG)$(IMPL_STRATEGY)$(OBJDIR_TAG).OBJD +endif +endif +endif +endif + |