diff options
Diffstat (limited to 'security/nss/cmd/SSLsample/NSPRerrs.h')
| -rw-r--r-- | security/nss/cmd/SSLsample/NSPRerrs.h | 133 |
1 files changed, 133 insertions, 0 deletions
diff --git a/security/nss/cmd/SSLsample/NSPRerrs.h b/security/nss/cmd/SSLsample/NSPRerrs.h new file mode 100644 index 000000000..bacdef6b2 --- /dev/null +++ b/security/nss/cmd/SSLsample/NSPRerrs.h @@ -0,0 +1,133 @@ +/* + * The contents of this file are subject to the Mozilla Public + * License Version 1.1 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * The Original Code is the Netscape security libraries. + * + * The Initial Developer of the Original Code is Netscape + * Communications Corporation. Portions created by Netscape are + * Copyright (C) 1994-2000 Netscape Communications Corporation. All + * Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License Version 2 or later (the + * "GPL"), in which case the provisions of the GPL are applicable + * instead of those above. If you wish to allow use of your + * version of this file only under the terms of the GPL and not to + * allow others to use your version of this file under the MPL, + * indicate your decision by deleting the provisions above and + * replace them with the notice and other provisions required by + * the GPL. If you do not delete the provisions above, a recipient + * may use your version of this file under either the MPL or the + * GPL. + */ +/* General NSPR 2.0 errors */ +/* Caller must #include "prerror.h" */ + +ER2( PR_OUT_OF_MEMORY_ERROR, "Memory allocation attempt failed." ) +ER2( PR_BAD_DESCRIPTOR_ERROR, "Invalid file descriptor." ) +ER2( PR_WOULD_BLOCK_ERROR, "The operation would have blocked." ) +ER2( PR_ACCESS_FAULT_ERROR, "Invalid memory address argument." ) +ER2( PR_INVALID_METHOD_ERROR, "Invalid function for file type." ) +ER2( PR_ILLEGAL_ACCESS_ERROR, "Invalid memory address argument." ) +ER2( PR_UNKNOWN_ERROR, "Some unknown error has occurred." ) +ER2( PR_PENDING_INTERRUPT_ERROR,"Operation interrupted by another thread." ) +ER2( PR_NOT_IMPLEMENTED_ERROR, "function not implemented." ) +ER2( PR_IO_ERROR, "I/O function error." ) +ER2( PR_IO_TIMEOUT_ERROR, "I/O operation timed out." ) +ER2( PR_IO_PENDING_ERROR, "I/O operation on busy file descriptor." ) +ER2( PR_DIRECTORY_OPEN_ERROR, "The directory could not be opened." ) +ER2( PR_INVALID_ARGUMENT_ERROR, "Invalid function argument." ) +ER2( PR_ADDRESS_NOT_AVAILABLE_ERROR, "Network address not available (in use?)." ) +ER2( PR_ADDRESS_NOT_SUPPORTED_ERROR, "Network address type not supported." ) +ER2( PR_IS_CONNECTED_ERROR, "Already connected." ) +ER2( PR_BAD_ADDRESS_ERROR, "Network address is invalid." ) +ER2( PR_ADDRESS_IN_USE_ERROR, "Local Network address is in use." ) +ER2( PR_CONNECT_REFUSED_ERROR, "Connection refused by peer." ) +ER2( PR_NETWORK_UNREACHABLE_ERROR, "Network address is presently unreachable." ) +ER2( PR_CONNECT_TIMEOUT_ERROR, "Connection attempt timed out." ) +ER2( PR_NOT_CONNECTED_ERROR, "Network file descriptor is not connected." ) +ER2( PR_LOAD_LIBRARY_ERROR, "Failure to load dynamic library." ) +ER2( PR_UNLOAD_LIBRARY_ERROR, "Failure to unload dynamic library." ) +ER2( PR_FIND_SYMBOL_ERROR, +"Symbol not found in any of the loaded dynamic libraries." ) +ER2( PR_INSUFFICIENT_RESOURCES_ERROR, "Insufficient system resources." ) +ER2( PR_DIRECTORY_LOOKUP_ERROR, +"A directory lookup on a network address has failed." ) +ER2( PR_TPD_RANGE_ERROR, +"Attempt to access a TPD key that is out of range." ) +ER2( PR_PROC_DESC_TABLE_FULL_ERROR, "Process open FD table is full." ) +ER2( PR_SYS_DESC_TABLE_FULL_ERROR, "System open FD table is full." ) +ER2( PR_NOT_SOCKET_ERROR, +"Network operation attempted on non-network file descriptor." ) +ER2( PR_NOT_TCP_SOCKET_ERROR, +"TCP-specific function attempted on a non-TCP file descriptor." ) +ER2( PR_SOCKET_ADDRESS_IS_BOUND_ERROR, "TCP file descriptor is already bound." ) +ER2( PR_NO_ACCESS_RIGHTS_ERROR, "Access Denied." ) +ER2( PR_OPERATION_NOT_SUPPORTED_ERROR, +"The requested operation is not supported by the platform." ) +ER2( PR_PROTOCOL_NOT_SUPPORTED_ERROR, +"The host operating system does not support the protocol requested." ) +ER2( PR_REMOTE_FILE_ERROR, "Access to the remote file has been severed." ) +ER2( PR_BUFFER_OVERFLOW_ERROR, +"The value requested is too large to be stored in the data buffer provided." ) +ER2( PR_CONNECT_RESET_ERROR, "TCP connection reset by peer." ) +ER2( PR_RANGE_ERROR, "Unused." ) +ER2( PR_DEADLOCK_ERROR, "The operation would have deadlocked." ) +ER2( PR_FILE_IS_LOCKED_ERROR, "The file is already locked." ) +ER2( PR_FILE_TOO_BIG_ERROR, +"Write would result in file larger than the system allows." ) +ER2( PR_NO_DEVICE_SPACE_ERROR, "The device for storing the file is full." ) +ER2( PR_PIPE_ERROR, "Unused." ) +ER2( PR_NO_SEEK_DEVICE_ERROR, "Unused." ) +ER2( PR_IS_DIRECTORY_ERROR, +"Cannot perform a normal file operation on a directory." ) +ER2( PR_LOOP_ERROR, "Symbolic link loop." ) +ER2( PR_NAME_TOO_LONG_ERROR, "File name is too long." ) +ER2( PR_FILE_NOT_FOUND_ERROR, "File not found." ) +ER2( PR_NOT_DIRECTORY_ERROR, +"Cannot perform directory operation on a normal file." ) +ER2( PR_READ_ONLY_FILESYSTEM_ERROR, +"Cannot write to a read-only file system." ) +ER2( PR_DIRECTORY_NOT_EMPTY_ERROR, +"Cannot delete a directory that is not empty." ) +ER2( PR_FILESYSTEM_MOUNTED_ERROR, +"Cannot delete or rename a file object while the file system is busy." ) +ER2( PR_NOT_SAME_DEVICE_ERROR, +"Cannot rename a file to a file system on another device." ) +ER2( PR_DIRECTORY_CORRUPTED_ERROR, +"The directory object in the file system is corrupted." ) +ER2( PR_FILE_EXISTS_ERROR, +"Cannot create or rename a filename that already exists." ) +ER2( PR_MAX_DIRECTORY_ENTRIES_ERROR, +"Directory is full. No additional filenames may be added." ) +ER2( PR_INVALID_DEVICE_STATE_ERROR, +"The required device was in an invalid state." ) +ER2( PR_DEVICE_IS_LOCKED_ERROR, "The device is locked." ) +ER2( PR_NO_MORE_FILES_ERROR, "No more entries in the directory." ) +ER2( PR_END_OF_FILE_ERROR, "Encountered end of file." ) +ER2( PR_FILE_SEEK_ERROR, "Seek error." ) +ER2( PR_FILE_IS_BUSY_ERROR, "The file is busy." ) +ER2( PR_IN_PROGRESS_ERROR, +"Operation is still in progress (probably a non-blocking connect)." ) +ER2( PR_ALREADY_INITIATED_ERROR, +"Operation has already been initiated (probably a non-blocking connect)." ) + +#ifdef PR_GROUP_EMPTY_ERROR +ER2( PR_GROUP_EMPTY_ERROR, "The wait group is empty." ) +#endif + +#ifdef PR_INVALID_STATE_ERROR +ER2( PR_INVALID_STATE_ERROR, "Object state improper for request." ) +#endif + +ER2( PR_MAX_ERROR, "Placeholder for the end of the list" ) |