diff options
Diffstat (limited to 'security/nss/cmd/libpkix/perf/libpkix_buildthreads.c')
| -rw-r--r-- | security/nss/cmd/libpkix/perf/libpkix_buildthreads.c | 382 |
1 files changed, 0 insertions, 382 deletions
diff --git a/security/nss/cmd/libpkix/perf/libpkix_buildthreads.c b/security/nss/cmd/libpkix/perf/libpkix_buildthreads.c deleted file mode 100644 index bce93f22a..000000000 --- a/security/nss/cmd/libpkix/perf/libpkix_buildthreads.c +++ /dev/null @@ -1,382 +0,0 @@ -/* ***** BEGIN LICENSE BLOCK ***** - * Version: MPL 1.1/GPL 2.0/LGPL 2.1 - * - * The contents of this file are subject to the Mozilla Public License Version - * 1.1 (the "License"); you may not use this file except in compliance with - * the License. You may obtain a copy of the License at - * http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" basis, - * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License - * for the specific language governing rights and limitations under the - * License. - * - * The Original Code is the PKIX-C library. - * - * The Initial Developer of the Original Code is - * Sun Microsystems, Inc. - * Portions created by the Initial Developer are - * Copyright 2004-2007 Sun Microsystems, Inc. All Rights Reserved. - * - * Contributor(s): - * Sun Microsystems, Inc. - * - * Alternatively, the contents of this file may be used under the terms of - * either the GNU General Public License Version 2 or later (the "GPL"), or - * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), - * in which case the provisions of the GPL or the LGPL are applicable instead - * of those above. If you wish to allow use of your version of this file only - * under the terms of either the GPL or the LGPL, and not to allow others to - * use your version of this file under the terms of the MPL, indicate your - * decision by deleting the provisions above and replace them with the notice - * and other provisions required by the GPL or the LGPL. If you do not delete - * the provisions above, a recipient may use your version of this file under - * the terms of any one of the MPL, the GPL or the LGPL. - * - * ***** END LICENSE BLOCK ***** */ -/* - * libpkixBuildThreads.c - * - * libpkix Builder Performance Evaluation application (multi-threaded) - * - */ - -#include <stdio.h> -#include <string.h> - -#include "secutil.h" - -#include "nspr.h" -#include "prtypes.h" -#include "prtime.h" -#include "prlong.h" - -#include "pk11func.h" -#include "secasn1.h" -#include "cert.h" -#include "cryptohi.h" -#include "secoid.h" -#include "certdb.h" -#include "nss.h" - -#include "pkix.h" -#include "pkix_tools.h" -#include "pkix_pl_cert.h" - -#include "testutil.h" -#include "testutil_nss.h" - -static void *plContext = NULL; - -#undef pkixTempResult -#define PERF_DECREF(obj) \ - { \ - PKIX_Error *pkixTempResult = NULL; \ - if (obj){ \ - pkixTempResult = PKIX_PL_Object_DecRef \ - ((PKIX_PL_Object *)(obj), plContext); \ - obj = NULL; \ - } \ - } - -static void finish(char* message, int code); - -typedef struct ThreadDataStr tData; - -struct ThreadDataStr { - CERTCertificate* anchor; - char* eecertName; - PRIntervalTime duration; - CERTCertDBHandle *handle; - PRUint32 iterations; -}; - -#define PKIX_LOGGER_ON 1 - -#ifdef PKIX_LOGGER_ON - -char *logLevels[] = { - "None", - "Fatal Error", - "Error", - "Warning", - "Debug", - "Trace" -}; - -static PKIX_Error *loggerCallback( - PKIX_Logger *logger, - PKIX_PL_String *message, - PKIX_UInt32 logLevel, - PKIX_ERRORCLASS logComponent, - void *plContext) -{ - char *msg = NULL; - static int callCount = 0; - - msg = PKIX_String2ASCII(message, plContext); - printf("Logging %s (%s): %s\n", - logLevels[logLevel], - PKIX_ERRORCLASSNAMES[logComponent], - msg); - PR_Free((void *)msg); - - return(NULL); -} - -#endif /* PKIX_LOGGER_ON */ - -static void ThreadEntry(void* data) -{ - tData* tdata = (tData*) data; - PRIntervalTime duration = tdata->duration; - PRIntervalTime start = PR_IntervalNow(); - - PKIX_List *anchors = NULL; - PKIX_ProcessingParams *procParams = NULL; - PKIX_BuildResult *buildResult = NULL; - CERTCertificate* nsseecert; - PKIX_PL_Cert *eeCert = NULL; - PKIX_CertStore *certStore = NULL; - PKIX_List *certStores = NULL; - PKIX_ComCertSelParams *certSelParams = NULL; - PKIX_CertSelector *certSelector = NULL; - PKIX_PL_Date *nowDate = NULL; - void *state = NULL; /* only relevant with non-blocking I/O */ - void *nbioContext = NULL; /* only relevant with non-blocking I/O */ - - PR_ASSERT(duration); - if (!duration){ - return; - } - - do { - - /* libpkix code */ - - /* keep more update time, testing cache */ - PKIX_PL_Date_Create_UTCTime(NULL, &nowDate, plContext); - - /* CertUsage is 0x10 and no NSS arena */ - /* We haven't determined how we obtain the value of wincx */ - - nsseecert = CERT_FindCertByNicknameOrEmailAddr(tdata->handle, - tdata->eecertName); - if (!nsseecert) finish("Unable to find eecert.\n", 1); - - pkix_pl_Cert_CreateWithNSSCert - (nsseecert, &eeCert, plContext); - - PKIX_List_Create(&anchors, plContext); - - /* - * This code is retired. - * pkix_pl_Cert_CreateWithNSSCert - * (tdata->anchor, &anchorCert, NULL); - * PKIX_TrustAnchor_CreateWithCert(anchorCert, &anchor, NULL); - * PKIX_List_AppendItem(anchors, (PKIX_PL_Object *)anchor, NULL); - */ - - PKIX_ProcessingParams_Create(anchors, &procParams, plContext); - - PKIX_ProcessingParams_SetRevocationEnabled - (procParams, PKIX_TRUE, plContext); - - PKIX_ProcessingParams_SetDate - (procParams, nowDate, plContext); - - /* create CertSelector with target certificate in params */ - - PKIX_ComCertSelParams_Create(&certSelParams, plContext); - - PKIX_ComCertSelParams_SetCertificate - (certSelParams, eeCert, plContext); - - PKIX_CertSelector_Create - (NULL, NULL, &certSelector, plContext); - - PKIX_CertSelector_SetCommonCertSelectorParams - (certSelector, certSelParams, plContext); - - PKIX_ProcessingParams_SetTargetCertConstraints - (procParams, certSelector, plContext); - - PKIX_PL_Pk11CertStore_Create(&certStore, plContext); - - PKIX_List_Create(&certStores, plContext); - PKIX_List_AppendItem - (certStores, (PKIX_PL_Object *)certStore, plContext); - PKIX_ProcessingParams_SetCertStores - (procParams, certStores, plContext); - - PKIX_BuildChain - (procParams, - &nbioContext, - &state, - &buildResult, - NULL, - plContext); - - /* - * As long as we use only CertStores with blocking I/O, we - * know we must be done at this point. - */ - - if (!buildResult){ - (void) fprintf(stderr, "libpkix BuildChain failed.\n"); - PORT_Assert(0); - return; - } - - tdata->iterations ++; - - PERF_DECREF(nowDate); - PERF_DECREF(anchors); - PERF_DECREF(procParams); - PERF_DECREF(buildResult); - PERF_DECREF(certStore); - PERF_DECREF(certStores); - PERF_DECREF(certSelParams); - PERF_DECREF(certSelector); - PERF_DECREF(eeCert); - - } while ((PR_IntervalNow() - start) < duration); - - -} - -static void -Test( - CERTCertificate* anchor, - char* eecertName, - PRIntervalTime duration, - CERTCertDBHandle *handle, - PRUint32 threads) -{ - tData data; - tData** alldata; - PRIntervalTime starttime, endtime, elapsed; - PRUint32 msecs; - float total = 0; - PRThread** pthreads = NULL; - PRUint32 i = 0; - - data.duration = duration; - data.anchor = anchor; - data.eecertName = eecertName; - data.handle = handle; - - data.iterations = 0; - - starttime = PR_IntervalNow(); - pthreads = (PRThread**)PR_Malloc(threads*sizeof (PRThread*)); - alldata = (tData**)PR_Malloc(threads*sizeof (tData*)); - for (i = 0; i < threads; i++){ - alldata[i] = (tData*)PR_Malloc(sizeof (tData)); - *alldata[i] = data; - pthreads[i] = - PR_CreateThread(PR_USER_THREAD, - ThreadEntry, - (void*) alldata[i], - PR_PRIORITY_NORMAL, - PR_GLOBAL_THREAD, - PR_JOINABLE_THREAD, - 0); - } - - for (i = 0; i < threads; i++) { - tData* args = alldata[i]; - PR_JoinThread(pthreads[i]); - total += args->iterations; - PR_Free((void*)args); - } - - PR_Free((void*) pthreads); - PR_Free((void*) alldata); - endtime = PR_IntervalNow(); - - endtime = PR_IntervalNow(); - elapsed = endtime - starttime; - msecs = PR_IntervalToMilliseconds(elapsed); - total /= msecs; - total *= 1000; - (void) fprintf(stdout, "%f operations per second.\n", total); -} - - -static void finish(char* message, int code) -{ - (void) printf(message); - exit(code); -} - -static void usage(char* progname) -{ - (void) printf("Usage : %s <-d certStoreDirectory> <duration> <threads> " - "<anchorNickname> <eecertNickname>\n\n", progname); - finish("", 0); -} - -int -libpkix_buildthreads(int argc, char** argv) -{ - CERTCertDBHandle *handle = NULL; - CERTCertificate* eecert = NULL; - PRIntervalTime duration = PR_SecondsToInterval(1); - PRUint32 threads = 1; - PKIX_UInt32 actualMinorVersion; - PKIX_UInt32 j = 0; - PKIX_Logger *logger = NULL; - void *wincx = NULL; - - /* if (argc != 5) -- when TrustAnchor used to be on command line */ - if (argc != 4) - { - usage(argv[0]); - } - if (atoi(argv[1]) > 0) - { - duration = PR_SecondsToInterval(atoi(argv[1])); - } - if (atoi(argv[2]) > 0) - { - threads = atoi(argv[2]); - } - - PKIX_PL_NssContext_Create(certificateUsageEmailSigner, PKIX_FALSE, - NULL, &plContext); - - handle = CERT_GetDefaultCertDB(); - PR_ASSERT(handle); - -#ifdef PKIX_LOGGER_ON - - /* set logger to log trace and up */ - PKIX_SetLoggers(NULL, plContext); - PKIX_Logger_Create(loggerCallback, NULL, &logger, plContext); - PKIX_Logger_SetMaxLoggingLevel - (logger, PKIX_LOGGER_LEVEL_WARNING, plContext); - PKIX_AddLogger(logger, plContext); - -#endif /* PKIX_LOGGER_ON */ - - /* - * This code is retired - * anchor = CERT_FindCertByNicknameOrEmailAddr(handle, argv[3]); - * if (!anchor) finish("Unable to find anchor.\n", 1); - * - * eecert = CERT_FindCertByNicknameOrEmailAddr(handle, argv[4]); - - * if (!eecert) finish("Unable to find eecert.\n", 1); - * - * Test(anchor, eecert, duration, threads); - */ - - Test(NULL, argv[3], duration, handle, threads); - - PERF_DECREF(logger); - - PKIX_Shutdown(plContext); - - return (0); -} |